Whilst investigating PR preprocessor/78324 I noticed that the
substring location code currently doesn't handle raw strings
correctly, by not skipping the 'R', opening quote, delimiter
and opening parenthesis.
For example, an attempt to underline chars 4-7 with caret at 6 of
this raw string yields this erroneous output:
__emit_string_literal_range (R"foo(0123456789)foo",
~~^~
With the patch, the correct range/caret is printed:
__emit_string_literal_range (R"foo(0123456789)foo",
~~^~
gcc/ChangeLog:
* input.c (selftest::test_lexer_string_locations_long_line): New
function.
(selftest::test_lexer_string_locations_raw_string_multiline): New
function.
(selftest::input_c_tests): Call the new functions, via
for_each_line_table_case.
gcc/testsuite/ChangeLog:
* gcc.dg/plugin/diagnostic-test-string-literals-1.c
(test_raw_string_one_liner): New function.
(test_raw_string_multiline): New function.
libcpp/ChangeLog:
* charset.c (cpp_interpret_string_1): Skip locations from
loc_reader when advancing 'p' when handling raw strings.
From-SVN: r242552
[gcc]
2016-11-17 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Richard Biener <rguenther@suse.de>
PR tree-optimization/77848
* tree-if-conv.c (tree_if_conversion): Always version loops unless
the user specified -ftree-loop-if-convert.
[gcc/testsuite]
2016-11-17 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Richard Biener <rguenther@suse.de>
PR tree-optimization/77848
* gfortran.dg/vect/pr77848.f: New test.
Co-Authored-By: Richard Biener <rguenther@suse.de>
From-SVN: r242550
2016-11-17 Richard Biener <rguenther@suse.de>
PR middle-end/78383
* tree-cfgcleanup.c (cleanup_control_flow_bb): Do not turn
non-local goto into CFG.
From-SVN: r242543
2016-11-17 Richard Biener <rguenther@suse.de>
* common.opt (ftree-loop-if-convert-stores): Mark as preserved for
backward compatibility.
* doc/invoke.texi (ftree-loop-if-convert-stores): Remove.
* tree-if-conv.c (pass_if_conversion::gate): Do not test
flag_tree_loop_if_convert_stores.
(pass_if_conversion::execute): Likewise.
From-SVN: r242542
2016-11-17 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR tree-optimization/78319
testsuite/
* gcc.dg/uninit-pred-8_a.c (foo): Mark dg-bogus test to xfail on
arm-none-eabi.
From-SVN: r242540
2016-11-17 Richard Biener <rguenther@suse.de>
PR tree-optimization/78306
* ipa-inline-analysis.c (initialize_inline_failed): Do not
inhibit inlining if function calls cilk_spawn.
(can_inline_edge_p): Likewise.
* gcc.dg/cilk-plus/pr78306.c: New testcase.
From-SVN: r242537
2016-11-16 Andrew PInski <apinski@cavium.com>
* config/aarch64/aarch64.opt (mverbose-cost-dump): New option.
* config/aarch64/aarch64.c (aarch64_rtx_costs): Use
flag_aarch64_verbose_cost instead of checking for details dump.
(aarch64_rtx_costs_wrapper): Likewise.
From-SVN: r242531
2016-11-16 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/58001
* io.c (next_char_not_space): Update handling of a 'tab' in a FORMAT.
(format_lex): Adjust invocations of next_char_not_space().
2016-11-16 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/58001
* gfortran.dg/fmt_tab_1.f90: Adjust testcase.
* gfortran.dg/fmt_tab_2.f90: Ditto.
From-SVN: r242530
PR rtl-optimization/78378
* combine.c (make_extraction): Use force_to_mode for non-{REG,MEM}
inner only if pos is 0. Fix up formatting.
* gcc.c-torture/execute/pr78378.c: New test.
From-SVN: r242526
This is a fix for my PR70890 patch, which incorrectly removed all
REG_EQUIV notes rather than just one regarding a reg that dies.
PR rtl-optimization/78325
PR rtl-optimization/70890
* ira.c (combine_and_move_insns): Only remove REG_EQUIV notes
for dead regno.
From-SVN: r242525
Adds Rust symbol demangler. Rust mangles symbols using GNU_V3 style,
adding a hash and various special character subtitutions. This adds
a new rust style to cplus_demangle and adds 3 helper functions
rust_demangle, rust_demangle_sym and rust_is_mangled.
rust-demangle.c was written by David. Mark did the code formatting to
GNU style and integration into the gcc/libiberty build system and
testsuite.
include/ChangeLog:
2016-11-03 David Tolnay <dtolnay@gmail.com>
Mark Wielaard <mark@klomp.org>
* demangle.h (DMGL_RUST): New macro.
(DMGL_STYLE_MASK): Add DMGL_RUST.
(demangling_styles): Add dlang_rust.
(RUST_DEMANGLING_STYLE_STRING): New macro.
(RUST_DEMANGLING): New macro.
(rust_demangle): New prototype.
(rust_is_mangled): Likewise.
(rust_demangle_sym): Likewise.
libiberty/ChangeLog:
2016-11-03 David Tolnay <dtolnay@gmail.com>
Mark Wielaard <mark@klomp.org>
* Makefile.in (CFILES): Add rust-demangle.c.
(REQUIRED_OFILES): Add rust-demangle.o.
* cplus-dem.c (libiberty_demanglers): Add rust_demangling case.
(cplus_demangle): Handle RUST_DEMANGLING.
(rust_demangle): New function.
* rust-demangle.c: New file.
* testsuite/Makefile.in (really-check): Add check-rust-demangle.
(check-rust-demangle): New rule.
* testsuite/rust-demangle-expected: New file.
Co-Authored-By: Mark Wielaard <mark@klomp.org>
From-SVN: r242524
2016-11-16 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
PR tree-optimization/77848
* tree-if-conv.c (version_loop_for_if_conversion): When versioning
an outer loop, only save basic block aux information for the inner
loop.
(versionable_outer_loop_p): New function.
(tree_if_conversion): Version the outer loop instead of the inner
one if the pattern will be recognized for outer-loop
vectorization.
From-SVN: r242520
The `user_defined_section_attribute' is used as part of the condition to
determine if GCC should partition blocks within a function into hot and
cold blocks. This global is initially false, and is set to true from
within the file parse phase of GCC, as part of the attribute handling
hook.
The `user_defined_section_attribute' is reset to false as part of the
final pass of GCC. However, the final pass is part of the optimisation
phase of the compiler, and so if at any point during the file parse
phase any function, or data, has a section attribute the global
`user_defined_section_attribute' will be set to true.
When GCC performs the block partitioning pass on the first function, if
`user_defined_section_attribute' is true then the function will not be
partitioned. Notice though, that due to the above, whether we partition
this first function or not has nothing to do with whether the function
has a section attribute, instead, if any function or data in the parsed
file has a section attribute then we don't partition the first
function.
After performing (or not) the block partitioning pass on the first
function we perform the final pass on the first function, at which point
we reset `user_defined_section_attribute' to false. As parsing is
complete by this point, we will never set
`user_defined_section_attribute' to true after that, and so all of the
following functions will have the partition blocks pass performed on
them, even if the function has a section attribute, and will not be
partitioned.
Luckily we don't end up partitioning functions that should not be
partitioned though. Due to the way that functions are selected during
the assembler writing phase, if a function has a section attribute this
takes priority over any hot/cold block partitioning that has been done.
What we see from the above then is that the
`user_defined_section_attribute' mechanism is broken. It was originally
created when GCC parsed, optimised, and generated assembler function at
a time. Now that we deal with the whole file in one go, we need to
update the mechanism used to gate the block partitioning pass.
This patch does this by looking specifically for a section attribute on
the function DECL, which removes the need for a global variable, and
will work whether we parse the whole file in one go, or one function at
a time.
A few new tests have been added. These check for the case where a
function is not partitioned when it could be.
gcc/ChangeLog:
* gcc/bb-reorder.c: Remove 'toplev.h' include.
(pass_partition_blocks::gate): No longer check
user_defined_section_attribute, instead check the function decl
for a section attribute.
* gcc/c-family/c-attribs.c (handle_section_attribute): No longer
set user_defined_section_attribute.
* gcc/final.c (rest_of_handle_final): Likewise.
* gcc/toplev.c: Remove definition of user_defined_section_attribute.
* gcc/toplev.h: Remove declaration of
user_defined_section_attribute.
gcc/testsuiteChangeLog:
* gcc.dg/tree-prof/section-attr-1.c: New file.
* gcc.dg/tree-prof/section-attr-2.c: New file.
* gcc.dg/tree-prof/section-attr-3.c: New file.
From-SVN: r242519
gcc/
* config/mips/mips.md (casesi_internal_mips16_<mode>):
Explicitly switch between JR and JRC for the table jump. Adjust
instruction count.
From-SVN: r242517
A step toward eliminating goc2c.
Drop the exported parfor code; it was needed for tests in the past, but
no longer is. The Go 1.7 runtime no longer uses parfor.
Reviewed-on: https://go-review.googlesource.com/33324
From-SVN: r242509
2016-11-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
gcc/
* config/arm/arm.md (arm_addsi3): Add alternative for addition of
general register with general register or ARM constant into SP
register.
gcc/testsuite/
* gcc.target/arm/empty_fiq_handler.c: New test.
From-SVN: r242508
Looking at PR77308, one of the issues is that the bswap optimization
phase doesn't work on ARM. This is due to an odd check that uses
SLOW_UNALIGNED_ACCESS (which is always true on ARM). Since the testcase
in PR77308 generates much better code with this patch (~13% fewer
instructions), it seems best to remove this check.
gcc/
* tree-ssa-math-opts.c (bswap_replace): Remove test
of SLOW_UNALIGNED_ACCESS.
testsuite/
* gcc.dg/optimize-bswapdi-3.c: Remove xfail.
* gcc.dg/optimize-bswaphi-1.c: Likewise.
* gcc.dg/optimize-bswapsi-2.c: Likewise.
From-SVN: r242506
ieee_support_halting only checked the availability of status
flags, not trapping support. On some targets the later can
only be checked at runtime: feenableexcept reports if
enabling traps failed.
So check trapping support by enabling/disabling it.
Updated the test that enabled trapping to check if it is
supported.
gcc/testsuite/
PR libgfortran/78314
* gfortran.dg/ieee/ieee_6.f90: Use ieee_support_halting.
libgfortran/
PR libgfortran/78314
* config/fpu-glibc.h (support_fpu_trap): Use feenableexcept.
From-SVN: r242505
gcc/
* config/mips/mips-protos.h (mips_set_text_contents_type): New
prototype.
* config/mips/mips.h (ASM_OUTPUT_BEFORE_CASE_LABEL): New macro.
(ASM_OUTPUT_CASE_END): Likewise.
* config/mips/mips.c (mips_set_text_contents_type): New
function.
(mips16_emit_constants): Record the pool's initial label number
with the `consttable' insn. Emit a `consttable_end' insn at the
end.
(mips_final_prescan_insn): Call `mips_set_text_contents_type'
for `consttable' insns.
(mips_final_postscan_insn): Call `mips_set_text_contents_type'
for `consttable_end' insns.
* config/mips/mips.md (unspec): Add UNSPEC_CONSTTABLE_END enum
value.
(consttable): Add operand.
(consttable_end): New insn.
gcc/testsuite/
* gcc.target/mips/data-sym-jump.c: New test case.
* gcc.target/mips/data-sym-pool.c: New test case.
* gcc.target/mips/insn-pseudo-4.c: Adjust for constant pool
annotation.
From-SVN: r242502
gcc/
2016-11-16 Yuri Rumyantsev <ysrumyan@gmail.com>
* params.def (PARAM_VECT_EPILOGUES_NOMASK): New.
* tree-if-conv.c (tree_if_conversion): Make public.
* * tree-if-conv.h: New file.
* tree-vect-data-refs.c (vect_analyze_data_ref_dependences) Avoid
dynamic alias checks for epilogues.
* tree-vect-loop-manip.c (vect_do_peeling): Return created epilog.
* tree-vect-loop.c: include tree-if-conv.h.
(new_loop_vec_info): Add zeroing orig_loop_info field.
(vect_analyze_loop_2): Don't try to enhance alignment for epilogues.
(vect_analyze_loop): Add argument ORIG_LOOP_INFO which is not NULL
if epilogue is vectorized, set up orig_loop_info field of loop_vinfo
using passed argument.
(vect_transform_loop): Check if created epilogue should be returned
for further vectorization with less vf. If-convert epilogue if
required. Print vectorization success for epilogue.
* tree-vectorizer.c (vectorize_loops): Add epilogue vectorization
if it is required, pass loop_vinfo produced during vectorization of
loop body to vect_analyze_loop.
* tree-vectorizer.h (struct _loop_vec_info): Add new field
orig_loop_info.
(LOOP_VINFO_ORIG_LOOP_INFO): New.
(LOOP_VINFO_EPILOGUE_P): New.
(LOOP_VINFO_ORIG_VECT_FACTOR): New.
(vect_do_peeling): Change prototype to return epilogue.
(vect_analyze_loop): Add argument of loop_vec_info type.
(vect_transform_loop): Return created loop.
gcc/testsuite/
2016-11-16 Yuri Rumyantsev <ysrumyan@gmail.com>
* lib/target-supports.exp (check_avx2_hw_available): New.
(check_effective_target_avx2_runtime): New.
* gcc.dg/vect/vect-tail-nomask-1.c: New test.
From-SVN: r242501
So far all target implementations of the separate shrink-wrapping hooks
use the DF LIVE info to figure out around which basic blocks the non-
volatile registers need to be saved. This is done by looking at the
IN+GEN+KILL sets of the basic blocks. However, that doesn't work for
registers that DF says are defined in the entry block, or used in the
exit block.
This patch introduces a local flag DF_SCAN_EMPTY_ENTRY_EXIT that says
no registers should be defined in the entry block, and none used in the
exit block. It also makes try_shrink_wrapping_separate use it. The
rs6000 port is changed to use IN+GEN+KILL for the LR component.
* config/rs6000/rs6000.c (rs6000_components_for_bb): Mark the LR
component as used also if LR_REGNO is a live input to the bb.
* df-scan.c (df_get_entry_block_def_set): Return immediately after
clearing the set if DF_SCAN_EMPTY_ENTRY_EXIT is set.
(df_get_exit_block_use_set): Ditto.
* df.h (df_scan_flags): New enum.
* shrink-wrap.c (try_shrink_wrapping_separate): Set
DF_SCAN_EMPTY_ENTRY_EXIT in df_scan->local_flags, and call
df_update_entry_block_defs and df_update_exit_block_uses
at the start; clear the flag and call those functions at the end.
From-SVN: r242497
