Don't print broadcast for scalar_mode, and print {bad} for invalid broadcast.
gas/
PR binutils/28381
* testsuite/gas/i386/bad-bcast.s: Add a new testcase.
* testsuite/gas/i386/bad-bcast.d: Likewise.
* testsuite/gas/i386/bad-bcast-intel.d: New.
opcodes/
PR binutils/28381
* i386-dis.c (static struct): Add no_broadcast.
(OP_E_memory): Mark invalid broadcast with no_broadcast=1 and Print "{bad}"for it.
(intel_operand_size): mark invalid broadcast with no_broadcast=1.
(OP_XMM): Mark scalar_mode with no_broadcast=1.
Put back 3 aborts where invalid lengths should have been filtered out.
gas/
PR binutils/28247
* testsuite/gas/i386/bad-bcast.s: Add a comment.
opcodes/
PR binutils/28247
* * i386-dis.c (OP_E_memory): Put back 3 aborts.
Intel AVX512 FP16 instructions use maps 3, 5 and 6. Maps 5 and 6 use 3 bits
in the EVEX.mmm field (0b101, 0b110). Map 5 is for instructions that were FP32
in map 1 (0Fxx). Map 6 is for instructions that were FP32 in map 2 (0F38xx).
There are some exceptions to this rule. Some things in map 1 (0Fxx) with imm8
operands predated our current conventions; those instructions moved to map 3.
FP32 things in map 3 (0F3Axx) found new opcodes in map3 for FP16 because map3
is very sparsely populated. Most of the FP16 instructions share opcodes and
prefix (EVEX.pp) bits with the related FP32 operations.
Intel AVX512 FP16 instructions has new displacements scaling rules, please refer
to the public software developer manual for detail information.
gas/
2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
Wei Xiao <wei3.xiao@intel.com>
Lili Cui <lili.cui@intel.com>
* config/tc-i386.c (struct Broadcast_Operation): Adjust comment.
(cpu_arch): Add .avx512_fp16.
(cpu_noarch): Add noavx512_fp16.
(pte): Add evexmap5 and evexmap6.
(build_evex_prefix): Handle EVEXMAP5 and EVEXMAP6.
(check_VecOperations): Handle {1to32}.
(check_VecOperands): Handle CheckRegNumb.
(check_word_reg): Handle Toqword.
(i386_error): Add invalid_dest_and_src_register_set.
(match_template): Handle invalid_dest_and_src_register_set.
* doc/c-i386.texi: Document avx512_fp16, noavx512_fp16.
opcodes/
2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
Wei Xiao <wei3.xiao@intel.com>
Lili Cui <lili.cui@intel.com>
* i386-dis.c (EXwScalarS): New.
(EXxh): Ditto.
(EXxhc): Ditto.
(EXxmmqh): Ditto.
(EXxmmqdh): Ditto.
(EXEvexXwb): Ditto.
(DistinctDest_Fixup): Ditto.
(enum): Add xh_mode, evex_half_bcst_xmmqh_mode, evex_half_bcst_xmmqdh_mode
and w_swap_mode.
(enum): Add PREFIX_EVEX_0F3A08_W_0, PREFIX_EVEX_0F3A0A_W_0,
PREFIX_EVEX_0F3A26, PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A56,
PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, PREFIX_EVEX_0F3A67,
PREFIX_EVEX_0F3AC2, PREFIX_EVEX_MAP5_10, PREFIX_EVEX_MAP5_11,
PREFIX_EVEX_MAP5_1D, PREFIX_EVEX_MAP5_2A, PREFIX_EVEX_MAP5_2C,
PREFIX_EVEX_MAP5_2D, PREFIX_EVEX_MAP5_2E, PREFIX_EVEX_MAP5_2F,
PREFIX_EVEX_MAP5_51, PREFIX_EVEX_MAP5_58, PREFIX_EVEX_MAP5_59,
PREFIX_EVEX_MAP5_5A_W_0, PREFIX_EVEX_MAP5_5A_W_1,
PREFIX_EVEX_MAP5_5B_W_0, PREFIX_EVEX_MAP5_5B_W_1,
PREFIX_EVEX_MAP5_5C, PREFIX_EVEX_MAP5_5D, PREFIX_EVEX_MAP5_5E,
PREFIX_EVEX_MAP5_5F, PREFIX_EVEX_MAP5_78, PREFIX_EVEX_MAP5_79,
PREFIX_EVEX_MAP5_7A, PREFIX_EVEX_MAP5_7B, PREFIX_EVEX_MAP5_7C,
PREFIX_EVEX_MAP5_7D_W_0, PREFIX_EVEX_MAP6_13, PREFIX_EVEX_MAP6_56,
PREFIX_EVEX_MAP6_57, PREFIX_EVEX_MAP6_D6, PREFIX_EVEX_MAP6_D7
(enum): Add EVEX_MAP5 and EVEX_MAP6.
(enum): Add EVEX_W_MAP5_5A, EVEX_W_MAP5_5B,
EVEX_W_MAP5_78_P_0, EVEX_W_MAP5_78_P_2, EVEX_W_MAP5_79_P_0,
EVEX_W_MAP5_79_P_2, EVEX_W_MAP5_7A_P_2, EVEX_W_MAP5_7A_P_3,
EVEX_W_MAP5_7B_P_2, EVEX_W_MAP5_7C_P_0, EVEX_W_MAP5_7C_P_2,
EVEX_W_MAP5_7D, EVEX_W_MAP6_13_P_0, EVEX_W_MAP6_13_P_2,
(get_valid_dis386): Properly handle new instructions.
(intel_operand_size): Handle new modes.
(OP_E_memory): Ditto.
(OP_EX): Ditto.
* i386-dis-evex.h: Updated for AVX512_FP16.
* i386-dis-evex-mod.h: Updated for AVX512_FP16.
* i386-dis-evex-prefix.h: Updated for AVX512_FP16.
* i386-dis-evex-reg.h : Updated for AVX512_FP16.
* i386-dis-evex-w.h : Updated for AVX512_FP16.
* i386-gen.c (cpu_flag_init): Add CPU_AVX512_FP16_FLAGS,
and CPU_ANY_AVX512_FP16_FLAGS. Update CPU_ANY_AVX512F_FLAGS
and CPU_ANY_AVX512BW_FLAGS.
(cpu_flags): Add CpuAVX512_FP16.
(opcode_modifiers): Add DistinctDest.
* i386-opc.h (enum): (AVX512_FP16): New.
(i386_opcode_modifier): Add reqdistinctreg.
(i386_cpu_flags): Add cpuavx512_fp16.
(EVEXMAP5): Defined as a macro.
(EVEXMAP6): Ditto.
* i386-opc.tbl: Add Intel AVX512_FP16 instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Ditto.
While EVEX.L'L are indeed ignored when EVEX.b stands for just SAE,
EVEX.b itself is not ignored when an insn permits neither rounding
control nor SAE.
While changing this aspect of EVEX.b handling, also alter unduly set
embedded broadcast: Don't call BadOp(), screwing up subsequent
disassembly, but emit "{bad}" instead.
Their sole use is for {,V}EXTRACTPS / {,V}P{EXT,INS}RB respectively; for
consistency also limit use of dqw_mode to Jdqw. 64-bit disassembly
reflecting REX.W / VEX.W is not in line with the assembler's opcode
table having NoRex64 / VexWIG in all respective templates, i.e. assembly
input isn't being honored there either. Obviously the 0FC5 encodings of
{,V}PEXTRW then also need adjustment for consistency reasons.
It has only a single use and can easily be represented by dq_mode
instead. Plus its handling in intel_operand_size() was duplicating
that of vex_vsib_{d,q}_w_dq_mode anyway.
Unlike the high bit of VEX.vvvv / EVEX.vvvv, EVEX.V' is not ignored
outside of 64-bit mode. Oddly enough there already are tests for these
cases, but their expectations were wrong. (This may have been based on
an old SDM version, where the restriction wasn't properly spelled out.)
What so far was OP_E_register() can be easily reused also for OP_G().
Add suitable parameters to the function and move the invocation of
swap_operand() to OP_E(). Adjust MOVSXD's first operand: There never was
a need to use movsxd_mode there, and its use gets in the way of the code
folding.
With EVEX.W clear the instruction doesn't ignore the rounding mode, but
(like for other insns without rounding semantics) EVEX.b set causes #UD.
Hence the handling of EVEX.W needs to be done when processing
evex_rounding_64_mode, not at the decode stages.
Derive a new 64-bit testcase from the 32-bit one to cover the different
EVEX.W treatment in both cases.
For VEX-encoded ones, all three involved vector registers have to be
distinct. For EVEX-encoded ones an actual mask register has to be in use
and zeroing-masking cannot be used (violation of either will #UD).
Additionally both involved vector registers have to be distinct for
EVEX-encoded gathers.
Commit 6ff00b5e12 ("x86/Intel: correct permitted operand sizes for
AVX512 scatter/gather") brought the assembler side of AVX512 S/G insn
handling in line with AVX2's, but the disassembler side was forgotten.
This has the benefit of
- allowing to fold a number of table entries,
- rendering a few #define-s and enumerators unused.
Some of the enumerators have ended up misplaced under the general
current ordering scheme. Move them (and their table entries) around
accordingly. Add a couple of blank lines as separators when close to
code being touched anyway. Also drop the odd 0F from 0FXOP (there's no
"0f" involved there anywhere) infixes where the respective enum gets
played with anyway.
When the VEX.L=1 decode matches that of both EVEX.L'L=1 and EVEX.L'L=2
(typically when all three are invalid) the (smaller) VEX table entry can
be reused by EVEX, instead of duplicating data. (Note that XM and XMM as
well as EXxmm_md and EXd are equivalent at least for the purposes here.)
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
This also adds a PREFIX_DATA 7531c61332 ("x86: simplify decode of
opcodes valid with (embedded) 66 prefix only") missed to apply to
vbroadcastf64x4.
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
The order of decodes influences the overall number of table entries.
Reduce table size quite a bit by first decoding few-alternatives
attributes common to all valid leaves.
All encodings not used in this range are (reserved) NOPs. Hence their
decoding should be fully consistent. For this to work the PREFIX_IGNORED
logic needs slightly extending, such that the attribute will also
- have an effect when used inside prefix_table[], yet without always
falling back to using slot 0,
- cause prefixes marked as ignored while decoding through prefix_table[]
to no longer be considered decoded, when encountered in a subsequent
decoding step.
In adjacent code also drop meaningless PREFIX_OPCODE.
Despite SYSEXIT being an Intel-only insn in long mode, its behavior
there is similar to SYSRET's: Depending on REX.W execution continues in
either 64-bit or compatibility mode. Hence distinguishing by suffix is
as necessary here as it is there.
The previous change
"x86: Ignore CS/DS/ES/SS segment-override prefixes in 64-bit mode"
to ignore segment override prefixes in 64-bit mode lead to dumping
branch hints as excessive prefixes:
ffffffff8109d5a0 <vmx_get_rflags>:
...
ffffffff8109d601: 3e 77 0a ds ja,pt ffffffff8109d60e <vmx_get_rflags+0x6e>
^^^^^
In this particular case, those prefixes are not excessive but are used
to provide branch hints - taken/not-taken - to the CPU.
Assign active_seg_prefix in that particular case to consume them.
gas/
2002-11-29 Borislav Petkov <bp@suse.de>
* testsuite/gas/i386/branch.d: Add new branch insns test.
* testsuite/gas/i386/branch.s: Likewise.
* testsuite/gas/i386/i386.exp: Insert the new branch test.
* testsuite/gas/i386/x86-64-branch.d: Test for branch hints insns.
* testsuite/gas/i386/x86-64-branch.s: Likewise.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
opcodes/
2020-11-28 Borislav Petkov <bp@suse.de>
* i386-dis.c (print_insn): Set active_seg_prefix for branch hint insns
to not dump branch hint prefixes 0x2E and 0x3E as unused prefixes.
In 64bit, assembler generates a warning for "sysret":
$ echo sysret | as --64 -o x.o -
{standard input}: Assembler messages:
{standard input}:1: Warning: no instruction mnemonic suffix given and no register operands; using default for `sysret'
Always display suffix for %LQ in 64bit to display "sysretl".
gas/
PR binutils/26704
* testsuite/gas/i386/noreg64-data16.d: Expect sysretl instead of
sysret.
* testsuite/gas/i386/noreg64.d: Likewise.
* testsuite/gas/i386/x86-64-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-opcode.d: Likewise.
opcodes/
PR binutils/26704
* i386-dis.c (putop): Always display suffix for %LQ in 64bit.
The MODRM byte can be checked to display the instruction name only if the
MODRM byte needed. Clear modrm if the MODRM byte isn't needed so that
modrm field checks in putop like, modrm.mod == N with N != 0, can be done
without checking need_modrm.
gas/
PR binutils/26705
* testsuite/gas/i386/x86-64-suffix.s: Add "mov %rsp,%rbp" before
sysretq.
* testsuite/gas/i386/x86-64-suffix-intel.d: Updated.
* testsuite/gas/i386/x86-64-suffix.d: Likewise.
opcodes/
PR binutils/26705
* i386-dis.c (print_insn): Clear modrm if not needed.
(putop): Check need_modrm for modrm.mod != 3. Don't check
need_modrm for modrm.mod == 3.
There are 11 MOD_VEX_0F38* inserted in MOD_0F38* group,
which should be placed in MOD_VEX_0F38* group.
opcode/
PR 26654
*i386-dis.c (enum): Put MOD_VEX_0F38* together.
i386-dis.c:12207 left shift of 128 by 24 places cannot be represented in type 'long int'
i386-dis.c:12220 left shift of 128 by 24 places cannot be represented in type 'long int'
i386-dis.c:12222 left shift of 1 by 31 places cannot be represented in type 'long int'
i386-dis.c:12222 signed integer overflow: 162254319 - -2147483648 cannot be represented in type 'long int'
* i386-dis.c (OP_E_memory): Don't cast to signed type when
negating.
(get32, get32s): Use unsigned types in shift expressions.
