This patch adds support for three new SME instructions: ADDSPL,
ADDSVL and RDSVL. They behave like ADDPL, ADDVL and RDVL, but read
the streaming vector length instead of the current vector length.
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add ADDSPL, ADDSVL and RDSVL.
* aarch64-dis-2.c: Regenerate.
gas/
* testsuite/gas/aarch64/sme.s, testsuite/gas/aarch64/sme.d: Add tests
for ADDSPL, ADDSVL and RDSVL.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
The MOPS instructions should be used as a triple, such as:
cpyfp [x0]!, [x1]!, x2!
cpyfm [x0]!, [x1]!, x2!
cpyfe [x0]!, [x1]!, x2!
The registers should also be the same for each writeback operand.
This patch adds a warning for code that doesn't follow this rule,
along similar lines to the warning that we already emit for
invalid uses of MOVPRFX.
include/
* opcode/aarch64.h (C_SCAN_MOPS_P, C_SCAN_MOPS_M, C_SCAN_MOPS_E)
(C_SCAN_MOPS_PME): New macros.
(AARCH64_OPDE_A_SHOULD_FOLLOW_B): New aarch64_operand_error_kind.
(AARCH64_OPDE_EXPECTED_A_AFTER_B): Likewise.
(aarch64_operand_error): Make each data value a union between
an int and a string.
opcodes/
* aarch64-tbl.h (MOPS_CPY_OP1_OP2_INSN): Add scan flags.
(MOPS_SET_OP1_OP2_INSN): Likewise.
* aarch64-opc.c (set_out_of_range_error): Update after change to
aarch64_operand_error.
(set_unaligned_error, set_reg_list_error): Likewise.
(init_insn_sequence): Use a 3-instruction sequence for
MOPS P instructions.
(verify_mops_pme_sequence): New function.
(verify_constraints): Call it.
* aarch64-dis.c (print_verifier_notes): Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
gas/
* config/tc-aarch64.c (operand_mismatch_kind_names): Add entries
for AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
(operand_error_higher_severity_p): Check that
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B
come between AARCH64_OPDE_RECOVERABLE and AARCH64_OPDE_SYNTAX_ERROR;
their relative order is not significant.
(record_operand_error_with_data): Update after change to
aarch64_operand_error.
(output_operand_error_record): Likewise. Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
* testsuite/gas/aarch64/mops_invalid_2.s,
testsuite/gas/aarch64/mops_invalid_2.d,
testsuite/gas/aarch64/mops_invalid_2.l: New test.
This patch adds support for FEAT_MOPS, an Armv8.8-A extension
that provides memcpy and memset acceleration instructions.
I took the perhaps controversial decision to generate the individual
instruction forms using macros rather than list them out individually.
This becomes useful with a follow-on patch to check that code follows
the correct P/M/E sequence.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en]
include/
* opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro.
(AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS.
(AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd.
(AARCH64_OPND_MOPS_ADDR_Rs): Likewise.
(AARCH64_OPND_MOPS_WB_Rn): Likewise.
opcodes/
* aarch64-asm.h (ins_x0_to_x30): New inserter.
* aarch64-asm.c (aarch64_ins_x0_to_x30): New function.
* aarch64-dis.h (ext_x0_to_x30): New extractor.
* aarch64-dis.c (aarch64_ext_x0_to_x30): New function.
* aarch64-tbl.h (aarch64_feature_mops): New feature set.
(aarch64_feature_mops_memtag): Likewise.
(MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN)
(MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN)
(MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN)
(MOPS_SET_INSN): New macros.
(aarch64_opcode_table): Add MOPS instructions.
(aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
* aarch64-opc.c (aarch64_print_operand): Handle
AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and
AARCH64_OPND_MOPS_WB_Rn.
(verify_three_different_regs): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* doc/c-aarch64.texi: Document +mops.
* config/tc-aarch64.c (parse_x0_to_x30): New function.
(parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
(aarch64_features): Add "mops".
* testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test.
* testsuite/gas/aarch64/mops_invalid.s,
* testsuite/gas/aarch64/mops_invalid.d,
* testsuite/gas/aarch64/mops_invalid.l: Likewise.
This patch is adding new SVE2 instructions added to support SME extension.
The following SVE2 instructions are added by the SME architecture:
* PSEL,
* REVD, SCLAMP and UCLAMP.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_pred_reg_with_index):
New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-9-illegal.d: New test.
* testsuite/gas/aarch64/sme-9-illegal.l: New test.
* testsuite/gas/aarch64/sme-9-illegal.s: New test.
* testsuite/gas/aarch64/sme-9.d: New test.
* testsuite/gas/aarch64/sme-9.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_PnT_Wm_imm.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
New inserter.
* aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
New extractor.
* aarch64-opc.c (aarch64_print_operand): Printout of
OPND_SME_PnT_Wm_imm.
* aarch64-opc.h (enum aarch64_field_kind): New bitfields
FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
* aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
(OP_SVE_QMQ): New qualifier.
(struct aarch64_opcode): New instructions PSEL, REVD,
SCLAMP and UCLAMP.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new SME mode selection and state access instructions:
* Add SMSTART and SMSTOP instructions.
* Add SVCR system register.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_sm_za): New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-8-illegal.d: New test.
* testsuite/gas/aarch64/sme-8-illegal.l: New test.
* testsuite/gas/aarch64/sme-8-illegal.s: New test.
* testsuite/gas/aarch64/sme-8.d: New test.
* testsuite/gas/aarch64/sme-8.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_SM_ZA.
(enum aarch64_insn_class): New instruction classes
sme_start and sme_stop.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
(aarch64_ins_sme_sm_za): New inserter.
* aarch64-dis.c (aarch64_ext_imm): New extractor.
(aarch64_ext_pstatefield): New extractor.
(aarch64_ext_sme_sm_za): New extractor.
* aarch64-opc.c (operand_general_constraint_met_p):
New pstatefield value for SME instructions.
(aarch64_print_operand): Printout for OPND_SME_SM_ZA.
(SR_SME): New register SVCR.
* aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
* aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
(PSTATE_ENCODE_CRM): Encode CRm field.
(PSTATE_DECODE_CRM): Decode CRm field.
(PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
(PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
(PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
field.
* aarch64-tbl.h (struct aarch64_opcode): New SMSTART
and SMSTOP instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new loads and stores defined by SME instructions.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_address): New parser.
(parse_sme_za_hv_tiles_operand_with_braces): New parser.
(parse_sme_za_array): New parser.
(output_operand_error_record): Print error details if
present.
(parse_operands): Support new operands.
* testsuite/gas/aarch64/sme-5-illegal.d: New test.
* testsuite/gas/aarch64/sme-5-illegal.l: New test.
* testsuite/gas/aarch64/sme-5-illegal.s: New test.
* testsuite/gas/aarch64/sme-5.d: New test.
* testsuite/gas/aarch64/sme-5.s: New test.
* testsuite/gas/aarch64/sme-6-illegal.d: New test.
* testsuite/gas/aarch64/sme-6-illegal.l: New test.
* testsuite/gas/aarch64/sme-6-illegal.s: New test.
* testsuite/gas/aarch64/sme-6.d: New test.
* testsuite/gas/aarch64/sme-6.s: New test.
* testsuite/gas/aarch64/sme-7-illegal.d: New test.
* testsuite/gas/aarch64/sme-7-illegal.l: New test.
* testsuite/gas/aarch64/sme-7-illegal.s: New test.
* testsuite/gas/aarch64/sme-7.d: New test.
* testsuite/gas/aarch64/sme-7.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands.
(enum aarch64_insn_class): Added sme_ldr and sme_str.
(AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
(aarch64_ins_sme_za_list): New inserter.
(aarch64_ins_sme_za_array): New inserter.
(aarch64_ins_sme_addr_ri_u4xvl): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
(aarch64_ext_sme_za_list): New extractor.
(aarch64_ext_sme_za_array): New extractor.
(aarch64_ext_sme_addr_ri_u4xvl): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
* aarch64-opc.c (operand_general_constraint_met_p):
(aarch64_match_operands_constraint): Handle sme_ldr, sme_str
and sme_misc.
(aarch64_print_operand): New operands supported.
* aarch64-tbl.h (OP_SVE_QUU): New qualifier.
(OP_SVE_QZU): New qualifier.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding ZERO (a list of 64-bit element ZA tiles)
instruction.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
New parser.
(parse_operands): Handle OPND_SME_list_of_64bit_tiles.
* testsuite/gas/aarch64/sme-4-illegal.d: New test.
* testsuite/gas/aarch64/sme-4-illegal.l: New test.
* testsuite/gas/aarch64/sme-4-illegal.s: New test.
* testsuite/gas/aarch64/sme-4.d: New test.
* testsuite/gas/aarch64/sme-4.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_list_of_64bit_tiles.
opcodes/ChangeLog:
* aarch64-opc.c (print_sme_za_list): New printing function.
(aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
* aarch64-opc.h (enum aarch64_field_kind): New bitfield
FLD_SME_zero_mask.
* aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new MOV (alias) and MOVA SME instruction.
gas/ChangeLog:
* config/tc-aarch64.c (enum sme_hv_slice): new enum.
(struct reloc_entry): Added ZAH and ZAV registers.
(parse_sme_immediate): Immediate parser.
(parse_sme_za_hv_tiles_operand): ZA tile parser.
(parse_sme_za_hv_tiles_operand_index): Index parser.
(parse_operands): Added ZA tile parser calls.
(REGNUMS): New macro. Regs with suffix.
(REGSET16S): New macro. 16 regs with suffix.
* testsuite/gas/aarch64/sme-2-illegal.d: New test.
* testsuite/gas/aarch64/sme-2-illegal.l: New test.
* testsuite/gas/aarch64/sme-2-illegal.s: New test.
* testsuite/gas/aarch64/sme-2.d: New test.
* testsuite/gas/aarch64/sme-2.s: New test.
* testsuite/gas/aarch64/sme-2a.d: New test.
* testsuite/gas/aarch64/sme-2a.s: New test.
* testsuite/gas/aarch64/sme-3-illegal.d: New test.
* testsuite/gas/aarch64/sme-3-illegal.l: New test.
* testsuite/gas/aarch64/sme-3-illegal.s: New test.
* testsuite/gas/aarch64/sme-3.d: New test.
* testsuite/gas/aarch64/sme-3.s: New test.
* testsuite/gas/aarch64/sme-3a.d: New test.
* testsuite/gas/aarch64/sme-3a.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New enums
AARCH64_OPND_SME_ZA_HV_idx_src and
AARCH64_OPND_SME_ZA_HV_idx_dest.
(struct aarch64_opnd_info): New ZA tile vector struct.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
New inserter ins_sme_za_hv_tiles.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
New extractor ext_sme_za_hv_tiles.
* aarch64-opc.c (aarch64_print_operand):
Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
* aarch64-opc.h (enum aarch64_field_kind): New enums
FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
(struct aarch64_operand): Increase fields size to 5.
* aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Patch is adding new SME matrix instructions. Please note additional
instructions will be added in following patches.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_zada_operand):
New parser.
* config/tc-aarch64.c (parse_reg_with_qual):
New reg parser.
* config/tc-aarch64.c (R_ZA): New egister type.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-illegal.d: New test.
* testsuite/gas/aarch64/sme-illegal.l: New test.
* testsuite/gas/aarch64/sme-illegal.s: New test.
* testsuite/gas/aarch64/sme.d: New test.
* testsuite/gas/aarch64/sme.s: New test.
* testsuite/gas/aarch64/sme-f64.d: New test.
* testsuite/gas/aarch64/sme-f64.s: New test.
* testsuite/gas/aarch64/sme-i64.d: New test.
* testsuite/gas/aarch64/sme-i64.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands
AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
AARCH64_OPND_SME_Pm.
(enum aarch64_insn_class): New instruction class sme_misc.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_print_operand):
Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
(verify_constraints): Handle OPND_SME_Pm.
* aarch64-opc.h (enum aarch64_field_kind):
New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
* aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
(OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
(OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
(OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
(OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
(OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
(OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
(OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
(SME_INSN): New instruction macro.
(SME_F64_INSN): New instruction macro.
(SME_I64_INSN): New instruction macro.
(SME_INSNC): New instruction macro.
(struct aarch64_opcode): New SME instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This series of patches (tagged [SME]) add support for the Scalable
Matrix Extension. Patch introduces new command line options: +sme, +sme-f64 and
+sme-i64 to -march command line options.
gas/ChangeLog:
* NEWS: Updated docs.
* config/tc-aarch64.c: New SME command line options.
* doc/c-aarch64.texi: Update docs.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_FEATURE_SME): New flag.
(AARCH64_FEATURE_SME_F64): New flag.
(AARCH64_FEATURE_SME_I64): New flag.
opcodes/ChangeLog:
* aarch64-tbl.h (SME): New feature object.
Patch 1: Fix diagnostics for exclusive load/stores and reclassify
Armv8.7-A ST/LD64 Atomics.
Following upstream pointing out some inconsistencies in diagnostics,
https://sourceware.org/pipermail/binutils/2021-February/115356.html
attached is a patch set that fixes the issues. I believe a combination
of two patches mainly contributed to these bugs:
https://sourceware.org/pipermail/binutils/2020-November/113961.htmlhttps://sourceware.org/pipermail/binutils/2018-June/103322.html
A summary of what this patch set fixes:
For instructions
STXR w0,x2,[x0]
STLXR w0,x2,[x0]
The warning we emit currently is misleading:
Warning: unpredictable: identical transfer and status registers --`stlxr w0,x2,[x0]'
Warning: unpredictable: identical transfer and status registers --`stxr w0,x2,[x0]'
it ought to be:
Warning: unpredictable: identical base and status registers --`stlxr w0,x2,[x0]'
Warning: unpredictable: identical base and status registers --`stxr w0,x2,[x0]'
For instructions:
ldaxp x0,x0,[x0]
ldxp x0,x0,[x0]
The warning we emit is incorrect
Warning: unpredictable: identical transfer and status registers --`ldaxp x0,x0,[x0]'
Warning: unpredictable: identical transfer and status registers --`ldxp x0,x0,[x0]'
it ought to be:
Warning: unpredictable load of register pair -- `ldaxp x0,x0,[x0]'
Warning: unpredictable load of register pair -- `ldxp x0,x0,[x0]'
For instructions
stlxp w0, x2, x2, [x0]
stxp w0, x2, x2, [x0]
We don't emit any warning when it ought to be:
Warning: unpredictable: identical base and status registers --`stlxp w0,x2,x2,[x0]'
Warning: unpredictable: identical base and status registers --`stxp w0,x2,x2,[x0]'
For instructions:
st64bv x0, x2, [x0]
st64bv x2, x0, [x0]
We incorrectly warn when its not necessary. This is because we classify them
incorrectly as ldstexcl when it should be lse_atomics in the opcode table.
The incorrect classification makes it pick up the warnings from warning on
exclusive load/stores.
Patch 2: Reclassify Armv8.7-A ST/LD64 Atomics.
This patch reclassifies ST64B{V,V0}, LD64B as lse_atomics rather than ldstexcl
according to their encoding class as specified in the architecture. This also
has the fortunate side-effect of spurious unpredictable warnings getting
eliminated.
For eg. For instruction:
st64bv x0, x2, [x0]
We incorrectly warn when its not necessary:
Warning: unpredictable: identical transfer and status registers --`st64bv x0,x2,[x0]'
This is because we classify them incorrectly as ldstexcl when it should be
lse_atomics in the opcode table. The incorrect classification makes it pick
up the warnings from warning on exclusive load/stores. This patch fixes it
by reclassifying it and no warnings are issued for this instruction.
opcodes/ChangeLog:
2021-04-09 Tejas Belagod <tejas.belagod@arm.com>
* aarch64-tbl.h (struct aarch64_opcode aarch64_opcode_table): Reclassify
LD64/ST64 instructions to lse_atomic instead of ldstexcl.
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
New -march option +flagm is added to enable independently this
feature.
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Extract PAC (Pointer Authentication) feature from Armv8.3-A.
Please note that PAC stays a Armv8.3-A feature but now can be
assigned to other architectures or CPUs.
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
This patch adds new to Armv8.7 WFIT instruction which take one operand:
WFIT <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFIT (Wait For Interrupt with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 570 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: Update test with WFIT insn.
* testsuite/gas/aarch64/system-5.s: Update test with WFIT insn.
opcodes/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): New instruction WFIT.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new to Armv8.7 WFET instruction which take one operand:
WFET <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFET (Wait For Event with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 565 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: New test.
* testsuite/gas/aarch64/system-5.s: New test.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): Add new WFET instruction encoding
and operand description.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new variant (nXS) of DSB memory barrier instruction
available in Armv8.7-a. New nXS variant has different encoding in
comparison with pre Armv8.7-a DSB memory barrier variant thus new
instruction and new operand was added.
DSB memory nXS barrier variant specifies the limitation on the barrier
operation. Allowed values are:
DSB SYnXS|#28
DSB ISHnXS|#24
DSB NSHnXS|#20
DSB OSHnXS|#16
Please note that till now, for barriers, barrier operation was encoded in
4-bit unsigned immediate CRm field (in the range 0 to 15).
For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned
assembly instruction immediate, encoded in instruction in two bits CRm<3:2>:
CRm<3:2> #imm
00 16
01 20
10 24
11 28
This patch extends current AArch64 barrier instructions with above mapping.
Notable patch changes include:
+ New DSB memory barrier variant encoding for Armv8.7-a.
+ New operand BARRIER_DSB_NXS for above instruction in order to
distinguish between existing and new DSB instruction flavour.
+ New set of DSB nXS barrier options.
+ New instruction inserter and extractor map between instruction
immediate 5-bit value and 2-bit CRm field of the instruction itself (see
FLD_CRm_dsb_nxs).
+ Regeneration of aarch64-[asm|dis|opc]-2.c files.
+ Test cases to cover new instruction assembling and disassembling.
For more details regarding DSB memory barrier instruction and its
Armv8.7-a flavour please refer to Arm A64 Instruction set documentation
for Armv8-A architecture profile, see document pages 132-133 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (parse_operands): Add
AARCH64_OPND_BARRIER_DSB_NXS handler.
(md_begin): Add content of aarch64_barrier_dsb_nxs_options to
aarch64_barrier_opt_hsh hash.
* testsuite/gas/aarch64/system-4-invalid.d: New test.
* testsuite/gas/aarch64/system-4-invalid.l: New test.
* testsuite/gas/aarch64/system-4-invalid.s: New test.
* testsuite/gas/aarch64/system-4.d: New test.
* testsuite/gas/aarch64/system-4.s: New test.
include/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_BARRIER_DSB_NXS.
(aarch64_barrier_dsb_nxs_options): Declare DSB nXS options.
opcodes/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter
ins_barrier_dsb_nx.
* aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor
ext_barrier_dsb_nx.
* aarch64-opc.c (aarch64_print_operand): New options table
aarch64_barrier_dsb_nxs_options.
* aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs.
* aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier
Armv8.7-a instruction.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds support for AArch64 -march=armv8.7-a command line option
in GAS.
Please note that this change ONLY extends -march= command line interface
with a new "armv8.7-a" option. Architectural changes like new instructions
will be added in following patches.
gas/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (armv8.7-a): New arch.
* doc/c-aarch64.texi (-march=armv8.7-a): Update docs.
include/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_7): New feature bitmask.
(AARCH64_ARCH_V8_7): New arch feature set.
opcodes/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (ARMV8_7): New macro.
This patch implements the TSB instructions:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
tsb-csync-trace-synchronization-barrier
Since TSB and PSB both use the same (and only) argument "CSYNC", this patch
reuses it for TSB. However, the same argument would imply different value
for CRm:Op2 which are anyway fixed values, so I have diverted the
inserter/extracter function to dummy versions instead of the "hint" version.
The operand checker part still uses the existing infratructure for
AARCH64_OPND_BARRIER_PSB to make sure the operand is parsed correctly.
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_barrier_psb): Update error messages
to include TSB.
* testsuite/gas/aarch64/system-2.d: Update -march and new tsb tests.
* testsuite/gas/aarch64/system-2.s: Add new tsb tests.
* testsuite/gas/aarch64/system.d: Update.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_none): New.
* aarch64-asm.h (ins_none): New declaration.
* aarch64-dis.c (aarch64_ext_none): New.
* aarch64-dis.h (ext_none): New declaration.
* aarch64-opc.c (aarch64_print_operand): Update case for
AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_opcode_table): Add tsb.
(AARCH64_OPERANDS): Update inserter/extracter for
AARCH64_OPND_BARRIER_PSB to use new dummy functions.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
There are a few instruction in AArch64 that are in the HINT space. Any of
these instructions should be accepted by the assembler/disassembler at any
architecture version. This patch fixes the existing instructions that are
not behaving accordingly.
I have used all of the instructions mentioned in the following to make the
changes:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
hint-hint-instruction
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/bti.d: Update -march option.
* testsuite/gas/aarch64/illegal-bti.d: Remove.
* testsuite/gas/aarch64/illegal-bti.l: Remove.
* testsuite/gas/aarch64/illegal-ras-1.l: Remove esb.
* testsuite/gas/aarch64/illegal-ras-1.s: Remove esb.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): Remove.
(aarch64_feature_ras, RAS): Likewise.
(aarch64_feature_stat_profile, STAT_PROFILE): Likewise.
(aarch64_opcode_table): Update bti, xpaclri, pacia1716, pacib1716,
autia1716, autib1716, esb, psb, dgh, paciaz, paciasp, pacibz, pacibsp,
autiaz, autiasp, autibz, autibsp to be CORE_INSN.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
bfcvt converts a .S input to a .H output, so any predicated movprfx
needs to operate on .S rather than .H. In common with SVE2 narrowing
top operations, bfcvtnt doesn't accept movprfx.
2020-01-31 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_MAX_ELEM for SVE bfcvt.
Remove C_SCAN_MOVPRFX for SVE bfcvtnt.
gas/
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: Use .h rather than
.s for the movprfx.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_28.d,
* testsuite/gas/aarch64/sve-movprfx_28.l,
* testsuite/gas/aarch64/sve-movprfx_28.s: New test.
This fixes the preferred disassembly for cfinv. The Armv8.4-a instruction
overlaps with the possible encoding space for msr. This because msr allows you
to use unallocated encoding space using the general sA_B_cC_cD_E form.
However when an encoding does become allocated then we need to ensure that it's
used as the preferred disassembly. The problem with cfinv is that its mask has
all bits sets because it has no arguments.
This causes issues for the Alias resolver in gas as it uses the mask to build
alias graph. In this case it can't do it since it thinks almost everything
would alias with cfinv. So instead we can only fix this by moving cfinv before
msr.
gas/ChangeLog:
PR 25403
* testsuite/gas/aarch64/armv8_4-a.d: Add cfinv.
* testsuite/gas/aarch64/armv8_4-a.s: Likewise.
opcodes/ChangeLog:
PR 25403
* aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv.
* aarch64-asm-2.c: Regenerate
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
According to the specification these permit the Q bit to control the
vector length operated on, and hence this bit should not already be set
in the opcode table entries (it rather needs setting dynamically). Note
how the test case output did also not match its input. Besides
correcting the test case also extend it to cover both forms.
This, at the assembler level, is just a "brace" feature covering both
AES and SHA2. Hence there's no need for it to have a separate feature
flag, freeing up a bit for future re-use. Along these lines there are
also a number of dead definitions/variables in the opcode table file.
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
In this last patch, the new Data Gathering Hint mnemonic is introduced.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* testsuite/gas/aarch64/dgh.s: New test.
* testsuite/gas/aarch64/dgh.d: New test.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/aarch64-tbl.h (V8_6_INSN): New macro for v8.6 instructions.
(aarch64_opcode_table): Add data gathering hint mnemonic.
* opcodes/aarch64-dis-2.c: Account for new instruction.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
This is a shorthand for the immediate argument being 0, as described here:
https://developer.arm.com/docs/ddi0596/latest/base-instructions-alphabetic-order/ldraa-ldrab-load-register-with-pointer-authentication
This is because the instructions still have a use with an immediate
argument of 0, unlike loads without the PAC functionality. Currently,
the mnemonics are
LDRAA Xt, [Xn, #<simm10>]!
LDRAB Xt, [Xn, #<simm10>]!
After this patch they become
LDRAA Xt, [Xn {, #<simm10>}]!
LDRAB Xt, [Xn {, #<simm10>}]!
gas * config/tc-aarch64.c (parse_address_main): Accept the omission of
the immediate argument for ldraa and ldrab as a shorthand for the
immediate being 0.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test.
* testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the
writeback form with no offset.
* testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset
error.
opcodes * aarch64-opc.c (print_immediate_offset_address): Don't print the
immediate for the writeback form of ldraa/ldrab if it is 0.
* aarch64-tbl.h: Updated the documentation for ADDR_SIMM10.
* aarch64-opc-2.c: Regenerated.
The entry for the FMOV alias of FCPY was missing C_SCAN_MOVPRFX.
(The entry for FCPY itself was OK.)
This was the only /m-predicated instruction I could see that was
missing the flag.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the
SVE FMOV alias of FCPY.
gas/
* testsuite/gas/aarch64/sve-movprfx_27.s,
* testsuite/gas/aarch64/sve-movprfx_27.d: New test.
SVE FCVTZS, FCVTZU, SCVTF and UCVTF need the same treatment as FCVT:
the register size used in a predicated MOVPRFX must be the wider of
the destination and source sizes.
Since I was adding a (supposedly) complete set of tests for converts,
it seemed more consistent to add a complete set of tests for shifts
as well, even though there's no bug to fix there.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags
to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries.
gas/
* testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU,
SCVTF, UCVTF, LSR and ASR.
* testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_26.l: Likewise.
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
This patch adds all the SVE2 instructions and their associated qualifier
sets.
Ok for trunk?
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-dis-2.c: Regenerate.
* aarch64-tbl.h (OP_SVE_BBU): New variant set.
(OP_SVE_BBB): New variant set.
(OP_SVE_DDDD): New variant set.
(OP_SVE_HHH): New variant set.
(OP_SVE_HHHU): New variant set.
(OP_SVE_SSS): New variant set.
(OP_SVE_SSSU): New variant set.
(OP_SVE_SHH): New variant set.
(OP_SVE_SBBU): New variant set.
(OP_SVE_DSS): New variant set.
(OP_SVE_DHHU): New variant set.
(OP_SVE_VMV_HSD_BHS): New variant set.
(OP_SVE_VVU_HSD_BHS): New variant set.
(OP_SVE_VVVU_SD_BH): New variant set.
(OP_SVE_VVVU_BHSD): New variant set.
(OP_SVE_VVV_QHD_DBS): New variant set.
(OP_SVE_VVV_HSD_BHS): New variant set.
(OP_SVE_VVV_HSD_BHS2): New variant set.
(OP_SVE_VVV_BHS_HSD): New variant set.
(OP_SVE_VV_BHS_HSD): New variant set.
(OP_SVE_VVV_SD): New variant set.
(OP_SVE_VVU_BHS_HSD): New variant set.
(OP_SVE_VZVV_SD): New variant set.
(OP_SVE_VZVV_BH): New variant set.
(OP_SVE_VZV_SD): New variant set.
(aarch64_opcode_table): Add sve2 instructions.
New operand describes a shift-left immediate encoded in bits
22:20-19:18-16 where UInt(bits) - esize == shift.
This operand is useful for instructions like sshllb.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22
operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHLIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22
operand.
This includes defining a new single bit field SVE_i2h at position 20.
SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded
in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm4_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX.
(fields): Handle SVE_i2h field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
