This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
As follow-up to this discussion:
https://sourceware.org/pipermail/gdb-patches/2020-August/171385.html
... make runto_main not pass no-message to runto. This means that if we
fail to run to main, for some reason, we'll emit a FAIL. This is the
behavior we want the majority of (if not all) the time.
Without this, we rely on tests logging a failure if runto_main fails,
otherwise. They do so in a very inconsisteny mannet, sometimes using
"fail", "unsupported" or "untested". The messages also vary widly.
This patch removes all these messages as well.
Also, remove a few "fail" where we call runto (and not runto_main). by
default (without an explicit no-message argument), runto prints a
failure already. In two places, gdb.multi/multi-re-run.exp and
gdb.python/py-pp-registration.exp, remove "message" passed to runto.
This removes a few PASSes that we don't care about (but FAILs will still
be printed if we fail to run to where we want to). This aligns their
behavior with the rest of the testsuite.
Change-Id: Ib763c98c5f4fb6898886b635210d7c34bd4b9023
With a gdb build using python 2.7, I run into:
...
(gdb) python \
gdb.events.breakpoint_modified.connect(lambda bp: print(bp.enabled))^M
File "<string>", line 1^M
gdb.events.breakpoint_modified.connect(lambda bp: print(bp.enabled))^M
^^M
SyntaxError: invalid syntax^M
Error while executing Python code.^M
(gdb) FAIL: gdb.python/py-breakpoint.exp: test_bkpt_auto_disable: \
trap breakpoint_modified event
...
This is caused by the following:
- a lambda function body needs to be an expression
- in python 2, print is a statement, while in python 3 it's a function
- a function call is an expression, and a statement is not.
Fix this by defining a function print_bp_enabled:
...
def print_bp_enabled (bp):
print (bp.enabled)
end
...
and using that instead.
Tested on x86_64-linux.
As breakpoint_modified observer is currently notified upon breakpoint stop
before handling auto-disabling when enable count is reached, the observer
is never notified of the disabling.
The problem affects:
- The MI interpreter enabled= value when reporting =breakpoint-modified
- A Python event handler for breakpoint_modified using the "enabled"
member of its parameter
- insight: breakpoint GUI window is not properly updated upon auto-disable
This patch moves the observer notification after the auto-disabling
code and implements corresponding tests for the MI and Python cases.
Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=23336
Change-Id: I0c50df4789334071e5390cb46b3ca0d4a7f83c61
Not all systems have hardware breakpoint support. Add a check
to see if the system supports hardware breakpoints.
gdb/testsuite/ChangeLog
* gdb.python/py-breakpoint.exp (test_hardware_breakpoints): Add
check for hardware breakpoint support.
This commit adds initial support for catchpoints to the python
breakpoint API.
This commit adds a BP_CATCHPOINT constant which corresponds to
GDB's internal bp_catchpoint. The new constant is documented in the
manual.
The user can't create breakpoints with type BP_CATCHPOINT after this
commit, but breakpoints that already exist, obtained with the
`gdb.breakpoints` function, can now have this type. Additionally,
when a stop event is reported for hitting a catchpoint, GDB will now
report a BreakpointEvent with the attached breakpoint being of type
BP_CATCHPOINT - previously GDB would report a generic StopEvent in
this situation.
gdb/ChangeLog:
* NEWS: Mention Python BP_CATCHPOINT feature.
* python/py-breakpoint.c (pybp_codes): Add bp_catchpoint support.
(bppy_init): Likewise.
(gdbpy_breakpoint_created): Likewise.
gdb/doc/ChangeLog:
* python.texinfo (Breakpoints In Python): Add BP_CATCHPOINT
description.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.c (do_throw): New function.
(main): Call do_throw.
* gdb.python/py-breakpoint.exp (test_catchpoints): New proc.
This allows the creation of hardware breakpoints in Python with
gdb.Breakpoint(type=gdb.BP_HARDWARE_BREAKPOINT)
And they are included in the sequence returned by gdb.breakpoints().
gdb/ChangeLog:
2021-01-21 Hannes Domani <ssbssa@yahoo.de>
PR python/19151
* python/py-breakpoint.c (bppy_get_location): Handle
bp_hardware_breakpoint.
(bppy_init): Likewise.
(gdbpy_breakpoint_created): Likewise.
gdb/doc/ChangeLog:
2021-01-21 Hannes Domani <ssbssa@yahoo.de>
PR python/19151
* python.texi (Breakpoints In Python): Document
gdb.BP_HARDWARE_BREAKPOINT.
gdb/testsuite/ChangeLog:
2021-01-21 Hannes Domani <ssbssa@yahoo.de>
PR python/19151
* gdb.python/py-breakpoint.exp: Add tests for hardware breakpoints.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
Tom de Vries detected that some python tests were broken as
they were still using gdb_py_test_multiple that was replaced
by gdb_test_multiline. Repair these tests by using the new function.
gdb/testsuite/ChangeLog
2020-06-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.python/py-breakpoint.exp: use gdb_test_multiline instead
of gdb_py_test_multiple.
* gdb.python/py-cmd.exp: Likewise.
* gdb.python/py-events.exp: Likewise.
* gdb.python/py-function.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.python/py-infthread.exp: Likewise.
* gdb.python/py-linetable.exp: Likewise.
* gdb.python/py-parameter.exp: Likewise.
* gdb.python/py-value.exp: Likewise.
The documentation for make-breakpoint from the Guile API and the `spec'
variant of the gdb.Breakpoint constructor from the Python API state that
the format acceptable for location strings is the same as that accepted
by the break command. However, using the -probe qualifier at the
beginning of the location string causes a GDB internal error as it
attempts to decode a probe location in the wrong code path. Without this
functionality, there doesn't appear to be another way to set breakpoints
on probe points from Python or Guile scripts.
This patch introduces a new helper function that returns a
breakpoint_ops instance appropriate for a parsed location and updates
the Guile and Python bindings to use said function, rather than the
current hard-coded use of bkpt_breakpoint_ops. Since this logic is
duplicated in the handling of the `break' and `trace' commands, those
are also updated to call into the new helper function.
gdb/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Fix scripted probe breakpoints.
* breakpoint.c (tracepoint_probe_breakpoint_ops): Move
declaration forward.
(breakpoint_ops_for_event_location_type)
(breakpoint_ops_for_event_location): Add function definitions.
(break_command_1, trace_command): Use
breakpoint_ops_for_event_location.
* breakpoint.h (breakpoint_ops_for_event_location): Add function
declarations.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Use
breakpoint_ops_for_event_location.
* python/py-breakpoint.c (bppy_init): Use
breakpoint_ops_for_event_location.
gdb/testsuite/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Test scripted probe breakpoints.
* gdb.guile/scm-breakpoint.c (main): Add probe point.
* gdb.python/py-breakpoint.c (main): Likewise.
* gdb.guile/scm-breakpoint.exp (test_bkpt_probe): Add probe
specifier test.
* gdb.python/py-breakpoint.exp (test_bkpt_probe): Likewise.
Currently, with:
(gdb) catch catch
Catchpoint 1 (catch)
(gdb) catch throw
Catchpoint 2 (throw)
(gdb) catch rethrow
Catchpoint 3 (rethrow)
You get:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000b122af exception catch
2 breakpoint keep y 0x0000000000b1288d exception throw
3 breakpoint keep y 0x0000000000b12931 exception rethrow
I think it doesn't make much sense usability-wise, to show a
catchpoint as a breakpoint. The fact that GDB sets a breakpoint at
some magic address in the C++ run time is an implementation detail,
IMO. And as seen in the previous patch, such a catchpoint can end up
with more than one location/address even, so showing a single address
isn't entirely accurate.
This commit hides the addresses from view, and makes GDB show
"catchpoint" for type as well:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 catchpoint keep y exception catch
2 catchpoint keep y exception throw
3 catchpoint keep y exception rethrow
This comment in the code seems telling:
/* We need to reset 'type' in order for code in breakpoint.c to do
the right thing. */
cp->type = bp_breakpoint;
It kind of suggests that the reason catchpoints end up shown as
breakpoints was that it was easier to implement them that way, rather
than a desired property.
This commit fixes things up to make it possible to have bp_catch
breakpoints have software/hardware breakpoint locations, thus
eliminating the need for that hack:
- redo breakpoint_address_is_meaningful in terms of the location's
type rather than breakpoint type.
- teach bpstat_what about stepping over the catchpoint locations.
- install a allocate_location method for "catch catch/throw/rethrow",
one that forces the location type.
Note that this also reverts the gdb hunk from:
commit 2a8be20359
Commit: Tom Tromey <tom@tromey.com>
CommitDate: Sat Oct 6 22:17:45 2018 -0600
Fix Python gdb.Breakpoint.location crash
because now "catch throw" catchpoints hit the
if (obj->bp->type != bp_breakpoint)
Py_RETURN_NONE;
check above, and, adjusts the testcase to no longer expect to see the
catchpoint in the gdb.breakpoints() list.
(Note: might make sense to do the same to Ada exception catchpoints.)
gdb/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* break-catch-throw.c (print_one_exception_catchpoint): Skip the
"addr" field.
(allocate_location_exception_catchpoint): New.
(handle_gnu_v3_exceptions): Don't reset 'type' to bp_breakpoint.
(initialize_throw_catchpoint_ops): Install
allocate_location_exception_catchpoint as allocate_location
method.
* breakpoint.c (bpstat_what) <bp_catch>: Set action to
BPSTAT_WHAT_SINGLE if not stopping and the location's type is not
bp_loc_other.
(breakpoint_address_is_meaningful): Delete.
(bl_address_is_meaningful): New.
(breakpoint_locations_match): Adjust comment.
(bp_location_from_bp_type): New, factored out of...
(bp_location::bp_location(breakpoint *)): ... this.
(bp_location::bp_location(breakpoint *, bp_loc_type)): New,
factored out of...
(bp_location::bp_location(breakpoint *)): ... this. Reimplement.
(bp_loc_is_permanent): Use bl_address_is_meaningful instead of
breakpoint_address_is_meaningful.
(bp_locations_compare): Adjust comment.
(update_global_location_list): Use bl_address_is_meaningful
instead of breakpoint_address_is_meaningful.
* breakpoint.h (bp_location::bp_location(breakpoint *)): New
explicit.
(bp_location::bp_location(breakpoint *, bp_loc_type)): Declare.
* python/py-breakpoint.c (bppy_get_location): No longer check
whether location is null.
gdb/doc/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* gdb.texinfo (C++ Exception GDB/MI Catchpoint Commands): Adjust
examples to show type=catchpoint instead of type=breakpoint and an
address.
gdb/testsuite/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* gdb.cp/catch-multi-stdlib.exp: Adjust expected "info
breakpoints" output.
* gdb.cp/exception.exp: Adjust expected "info breakpoints" output.
* gdb.python/py-breakpoint.exp: No longer expect that "catch
throw" creates breakpoint.
* gdb.mi/mi-catch-cpp-exceptions.exp (setup_catchpoint): Expect
'type="catchpoint"'.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
I noticed today that gdb.Breakpoint.location will crash when applied
to a catchpoint made with "catch throw".
The bug is that "catch throw" makes a breakpoint that is of type
bp_breakpoint, but which does not have a location.
Regression tested on x86-64 Fedora 28.
gdb/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (bppy_get_location): Handle a
bp_breakpoint without a location.
gdb/testsuite/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
* gdb.python/py-breakpoint.exp (check_last_event): Check location
of a "throw" catchpoint.
This changes the Python API so that breakpoint commands can be set by
writing to the "commands" attribute.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* NEWS: Mention that breakpoint commands are writable.
* python/py-breakpoint.c (bppy_set_commands): New function.
(breakpoint_object_getset) <"commands">: Use it.
doc/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* python.texi (Breakpoints In Python): Mention that "commands" is
writable.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* gdb.python/py-breakpoint.exp: Test setting breakpoint commands.
This patch adds the possibility to pass a qualified=True|False parameter
when creating a breakpoint in Python. It is equivalent to using
-qualified in a linespec. The parameter actually accepts any Python
value, and converts it to boolean using Python's standard rules for
that (https://docs.python.org/3/library/stdtypes.html#truth).
Unlike the -source/-line/-function/-label parameters, it is possible to
use -qualified with a "normal" (non-explicit) linespec. Therefore, it
is possible (unlike these other parameters) to use this new parameter
along with the spec parameter.
I updated the py-breakpoint.exp test. To be able to test multiple
locations using a namespace, I had to switch the test case to compile as
C++. If we really wanted to, we could run it as both C and C++, but
omit the C++-specific parts when running it as C.
gdb/ChangeLog:
* location.h (string_to_event_location): Add match_type
parameter.
* location.c (string_to_event_location): Likewise.
* python/py-breakpoint.c (bppy_init): Handle qualified
parameter.
gdb/doc/ChangeLog:
* python.texi (Manipulating breakpoints using Python): Document
qualified parameter to gdb.Breakpoint.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.c (foo_ns::multiply): New function.
* gdb.python/py-breakpoint.exp: Compile the test case as c++,
call test_bkpt_qualified.
(test_bkpt_qualified): New proc.
The prefix in test_bkpt_explicit_loc is wrong. Instead of using
with_test_prefix directly, define test_bkpt_explicit_loc with
proc_with_prefix.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Define
with proc_with_prefix, don't use with_test_prefix.
This introduces several new keywords to the bppy_init constructor.
The spec parameter is now optional but mutually exclusive to the
explicit keywords source, label, function and line.
gdb/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python/py-breakpoint.c (bppy_init): Use string_to_event_location
over basic location code. Implement explicit location keywords.
(bppy_init_validate_args): New function.
* NEWS: Document Python explicit breakpoint locations.
doc/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python.texi (Breakpoints In Python): Add text relating
to allowed explicit locations and keywords in gdb.Breakpoints.
testsuite/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Add new
tests for explicit locations.
Use proc_with_prefix to avoid having to call with_test_prefix with a
duplicate of the proc name. The diff is mostly lines being re-indented.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.exp (test_bkpt_basic,
test_bkpt_deletion, test_bkpt_cond_and_cmds,
test_bkpt_invisible, test_watchpoints, test_bkpt_internal,
test_bkpt_eval_funcs, test_bkpt_temporary, test_bkpt_address,
test_bkpt_pending, test_bkpt_events): Use proc_with_prefix,
remove with_test_prefix.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This patch adds some breakpoint events to Python. In particular,
there is a creation event that is emitted when a breakpoint is
created; a modification event that is emitted when a breakpoint
changes somehow; and a deletion event that is emitted when a
breakpoint is deleted.
In this patch, the event's payload is the breakpoint itself. I
considered making a new event type to hold the breakpoint, but I
didn't see a need. Still, I thought I would mention this as a spot
where some other choice is possible.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python/py-evts.c (gdbpy_initialize_py_events): Call
add_new_registry for new events.
* python/py-events.h (events_object) <breakpoint_created,
breakpoint_deleted, breakpoint_modified>: New fields.
* python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
breakpoint changed event.
(gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
(gdbpy_breakpoint_modified): New function.
(gdbpy_initialize_breakpoints): Attach to the breakpoint modified
observer.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python.texi (Events In Python): Document new breakpoint events.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* gdb.python/py-breakpoint.exp (connect_event, check_last_event)
(test_bkpt_events): New procs.
This patch adds a "pending" attribute to gdb.Breakpoint.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* NEWS: Update.
* python/py-breakpoint.c (bppy_get_pending): New function.
(breakpoint_object_getset): Add entry for "pending".
* breakpoint.h (pending_breakpoint_p): Declare.
* breakpoint.c (pending_breakpoint_p): New function.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* python.texi (Breakpoints In Python): Document
Breakpoint.pending.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add "pending"
test.
(test_watchpoints): Likewise.
(test_bkpt_pending): New proc.
PR python/17981 notes that gdb.breakpoints() returns None when there
are no breakpoints; whereas an empty list or tuple would be more in
keeping with Python and the documentation.
This patch fixes the bug by changing the no-breakpoint return to make
an empty tuple.
Built and regtested on x86-64 Fedora 23.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
when there are no breakpoints.
2016-05-23 Tom Tromey <tom@tromey.com>
* python.texi (Basic Python): Document gdb.breakpoints return.
2016-05-23 Tom Tromey <tom@tromey.com>
PR python/17981:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add test for
no-breakpoint case.
Now that "legacy" linespecs benefit from consolidated support in
string_to_event_location_basic, python's Breakpoint command should use this
function to turn strings into event locations.
As a result, this patch fixes python/19506. Before:
(gdb) python gdb.Breakpoint("*main")
Traceback (most recent call last):
File "<string>", line 1, in <module>
RuntimeError: Function "*main" not defined.
Error while executing Python code.
After:
(gdb) python gdb.Breakpoint("*main")
Breakpoint 1 at 0x4005fb: file ../../../src/gdb/testsuite/gdb.python/py-breakpoint.c, line 32.
gdb/ChangeLog
PR python/19506
* python/py-breakpoint.c (bppy_init): Use
string_to_event_location_basic instead of new_linespec_location.
gdb/testsuite/ChangeLog
PR python/19506
* gdb.python/py-breakpoint.exp (test_bkpt_address): New procedure.
(toplevel): Call test_bkpt_address.
Some testcases, mostly gdb.reverse ones, assume the presence of a
'/' directory separator before the source file name. This is
incorrect for mingw32 hosts, generating false failures for those
tests.
I attempted to catch most of the occurrences of the pattern
".*/$srcfile" and replaced them with ".*$srcfile". The latter
is used elsewhere in the testsuite. The resulting patch is attached.
I also see other occurrences of the same assumption throughout the
testsuite, but usually they are arguments for function calls and i
seem to recall either the test harness or GDB deals with those
paths properly.
gdb/testsuite:
2014-10-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.guile/scm-breakpoint.exp: Do not assume any
directory separators when matching source file paths.
* gdb.python/py-breakpoint.exp: Likewise.
* gdb.reverse/break-precsave.exp: Likewise.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/i387-env-reverse.exp: Likewise.
* gdb.reverse/i387-stack-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
* python/py-breakpoint.c (bppy_get_temporary): New function.
(bppy_init): New keyword: temporary. Parse it and set breakpoint
to temporary if True.
2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add temporary breakpoint tests.
2013-11-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document temporary
option in breakpoint constructor, and add documentation to the
temporary attribute.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* gdb.base/charset.exp: Change print syntax for Python 3
compatibility.
* gdb.python/py-block.exp: Ditto.
* gdb.python/py-breakpoint.exp: Ditto.
* gdb.python/py-cmd.exp: Ditto.
* gdb.python/py-events.py: Ditto.
* gdb.python/py-finish-breakpoint.py: Ditto.
* gdb.python/py-finish-breakpoint2.exp: Ditto.
* gdb.python/py-finish-breakpoint2.py: Ditto.
* gdb.python/py-frame-inline.exp: Ditto.
* gdb.python/py-frame.exp: Ditto.
* gdb.python/py-infthread.exp: Ditto.
* gdb.python/py-objfile.exp: Ditto.
* gdb.python/py-parameter.exp: Ditto.
* gdb.python/py-progspace.exp: Ditto.
* gdb.python/py-prompt.exp: Ditto.
* gdb.python/py-symbol.exp: Ditto.
* gdb.python/py-symtab.exp: Ditto.
* gdb.python/py-template.exp: Ditto.
* gdb.python/py-value-cc.exp: Ditto.
* gdb.python/python.exp: Ditto.
* gdb.python/source2.py: Ditto.
* gdb.python/lib-types.exp: Change print syntax for Python 3
compatibility.
Use sorted() function rather than sort() method.
Accept either int or long values for enum values.
* gdb.python/py-events.exp: Use exec(open(...).read()) instead of
execfile for Python 3 compatibility.
* gdb.python/py-evsignal.exp: Ditto.
* gdb.python/py-evthreads.exp: Ditto.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/py-pp-maint.exp: Ditto.
* gdb.python/py-prettyprint.exp: Ditto.
* gdb.python/py-finish-breakpoint.exp: Change print syntax for
Python 3 compatibility.
Skip tests for Python 2.4.
* gdb.python/py-inferior.exp: Change print syntax for
Python 3 compatibility.
Use byte string rather than character string in memory write test
if Python 3.
* gdb.python/py-pp-maint.py: Change class declarations to "new
class" syntax.
* gdb.python/py-prettyprint.py: Change iterator class to generator
function for Python 3 compatibility.
Make all classes "new style".
Fix indentation issue and stray semicolon.
* gdb.python/py-shared.expChange print syntax for Python 3
compatibility.
Define "long" if Python 3.
* gdb.python/py-type.exp: Change print syntax for Python 3
compatibility.
Accept either int or long values for enum values.
* gdb.python/py-value.exp: Change print syntax for Python 3
compatibility.
Skip "long" and "unicode" tests if Python 3.
Accept either "type" or "class" in type checks.
* lib/gdb.exp (gdb_py_is_py3k): New flag set if Python 3.
(gdb_py_is_py24): New flag set if Python 2.4 or 2.5.
prepare_for_testing.
* gdb.python/py-block.exp: Use standard_testfile.
* gdb.python/py-breakpoint.exp: Use standard_testfile.
* gdb.python/py-events.exp: Use standard_testfile,
standard_output_file.
* gdb.python/py-evsignal.exp: Use standard_testfile.
* gdb.python/py-evethreads.exp: Use standard_testfile.
* gdb.python/py-explore-cc.exp: Use standard_testfile.
* gdb.python/py-explore.exp: Use standard_testfile.
* gdb.python/py-finish-breakpoint.exp: Use standard_testfile,
standard_output_file.
* gdb.python/py-finish-breakpoint2.exp: Use standard_testfile,
prepare_for_testing.
* gdb.python/py-frame-inline.exp: Use standard_testfile.
* gdb.python/py-frame.exp: Use standard_testfile.
* gdb.python/py-inferior.exp: Use standard_testfile.
* gdb.python/py-infthread.exp: Use standard_testfile.
* gdb.python/py-mi.exp: Use standard_testfile.
* gdb.python/py-objfile-script.exp: Use standard_testfile,
build_executable.
* gdb.python/py-objfile.exp: Use standard_testfile.
* gdb.python/py-pp-maint.exp: Use standard_testfile,
prepare_for_testing.
* gdb.python/py-prettyprint.exp: Use standard_testfile.
* gdb.python/py-progspace.exp: Use standard_testfile,
build_executable.
* gdb.python/py-prompt.exp: Use standard_testfile,
build_executable.
* gdb.python/py-section-script.exp: Use standard_testfile,
build_executable.
* gdb.python/py-shared.exp: Use standard_testfile,
standard_output_file, clean_restart.
* gdb.python/py-symbol.exp: Use standard_output_file,
prepare_for_testing.
* gdb.python/py-symtab.exp: Use standard_output_file,
prepare_for_testing
* gdb.python/py-template.exp: Use standard_testfile.
* gdb.python/py-type.exp: Use standard_testfile.
* gdb.python/py-value-cc.exp: Use standard_testfile.
* gdb.python/py-value.exp: Use standard_testfile.
* gdb.python/python.exp: Use standard_testfile, build_executable.
* Makefile.in (SUBDIR_PYTHON_OBS): Add py-finishbreakpoint.o.
(SUBDIR_PYTHON_SRCS): Add python/py-finishbreakpoint.c.
Add build rule for this file.
* infcmd.c (print_return_value): Split to create get_return_value.
(get_return_value): New function based on print_return_value. Handle
case where stop_registers are not set.
* inferior.h (get_return_value): New prototype.
* python/py-breakpoint.c (bppy_pending_object): Make non-static.
(gdbpy_breakpoint_created): Set is_py_finish_bp is necessary.
(struct breakpoint_object): Move to python-internal.h
(BPPY_REQUIRE_VALID): Likewise.
(BPPY_SET_REQUIRE_VALID): Likewise.
(gdbpy_breakpoint_created): Initialize is_finish_bp.
(gdbpy_should_stop): Add pre/post hooks before/after calling stop
method.
* python/python-internal.h (breakpoint_object_type): Add as extern.
(bppy_pending_object): Likewise.
(typedef struct breakpoint_object) Removed.
(struct breakpoint_object): Moved from py-breakpoint.c.
Add field is_finish_bp.
(BPPY_REQUIRE_VALID): Moved from py-breakpoint.c.
(BPPY_SET_REQUIRE_VALID): Likewise.
(frame_object_to_frame_info): New prototype.
(gdbpy_initialize_finishbreakpoints): New prototype.
(bpfinishpy_is_finish_bp): Likewise.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_post_stop_hook): Likewise.
* python/py-finishbreakpoint.c: New file.
* python/py-frame.c(frame_object_to_frame_info): Make non-static and
accept PyObject instead of frame_object.
(frapy_is_valid): Don't cast to frame_object.
(frapy_name): Likewise.
(frapy_type): Likewise.
(frapy_unwind_stop_reason): Likewise.
(frapy_pc): Likewise.
(frapy_block): Likewise.
(frapy_function): Likewise.
(frapy_older): Likewise.
(frapy_newer): Likewise.
(frapy_find_sal): Likewise.
(frapy_read_var): Likewise.
(frapy_select): Likewise.
* python/python.c (gdbpy_is_stopped_at_finish_bp): New noop function.
(_initialize_python): Add gdbpy_initialize_finishbreakpoints.
* python/python.h: Include breakpoint.h
(gdbpy_is_stopped_at_finish_bp): New prototype.
doc/
* gdb.texinfo (Finish Breakpoints in Python): New subsection.
(Python API): Add menu entry for Finish Breakpoints.
testsuite/
* Makefile.in (EXECUTABLES): Add py-finish-breakpoint and
py-finish-breakpoint2
(MISCALLANEOUS): Add py-events-shlib.so and py-events-shlib-nodebug.so
* gdb.python/py-breakpoint.exp (mult_line): Define and use variable
instead of line number.
* gdb.python/py-finish-breakpoint.c: New file.
* gdb.python/py-finish-breakpoint.exp: New file.
* gdb.python/py-finish-breakpoint.py: New file.
* gdb.python/py-finish-breakpoint2.cc: New file.
* gdb.python/py-finish-breakpoint2.exp: New file.
* gdb.python/py-finish-breakpoint2.py: New file.
* gdb.texinfo (Breakpoints In Python): Add description and
example
of Python stop function operation.
2010-03-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add Python stop operations
tests.
2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
* python/python.h: Declare gdbpy_should_stop and
gdbpy_breakpoint_has_py_cond.
* python/python.c: Add python.h to includes. Remove
python.h from
HAVE_PYTHON definition
(gdbpy_should_stop): New dummy function.
(gdbpy_breakpoint_has_py_cond): New dummy function.
* python/py-breakpoint.c (bppy_init): Rewrite to allow
sub-classing capabilities.
(gdbpy_should_stop): New function.
(gdbpy_breakpoint_has_py_cond): New function.
(local_setattro): New function.
* breakpoint.c (condition_command): Add check for Python
'stop'
operation.
(bpstat_check_breakpoint_conditions): Execute Python
'stop'
operation function as part of stop/continue tests.
I noticed that the last "maint info breakpoints" test expects the
output to contain:
.*hw watchpoint.*
But some platforms do not have hw watchpoints (for instance, the
sim on erc32 doesn't). So I changed the expected output to accept
either.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.exp: Fix the expected output of
one of the "maint info breakpoints" tests to accept the output
generated on platforms that do not have hardware watchpoints.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.exp: Remove unnecessary call to
clean_restart. Be a little stricter in the expected output
for one of the tests. Fix a typo in one of the comments.
* python/py-breakpoint.c (BPPY_REQUIRE_VALID): Check if bp is
NULL.
(BPPY_SET_REQUIRE_VALID): Ditto.
(bpnum_is_valid): Delete function.
(bppy_get_visibility): New function.
(bppy_new): Parse for, and validate internal keyword. Pass
internal keyword to breakpoint or watchpoint functions.
(build_bp_list): New function.
(gdbpy_breakpoints): Rewrite. Use build_bp_list and
iterate_over_breakpoints.
(gdbpy_breakpoint_created): Rewrite. Do not store breakpoints in a
look-aside vector.
(gdbpy_breakpoint_deleted): Rewrite, defer breakpoint management
to internal breakpoint chain.
* breakpoint.c (set_breakpoint_number): New function.
(breakpoint_1): Check if breakpoint number is more than zero.
(set_raw_breakpoint_without_location): Set py_bp_object to NULL.
(create_breakpoint_sal): Take a new parameter called internal.
Call set_breakpoint_number with internal parameter. Do not
mention internal breakpoints. All callers updated.
(create_breakpoint): Ditto.
(create_breakpoints_sal): Ditto.
(watch_command_1): Ditto.
(watch_command_wrapper): Take a new parameter called internal.
All callers updated.
(rwatch_command_wrapper): Ditto.
(awatch_command_wrapper): Ditto.
(save_breakpoints): Update breakpoint save condition check.
(iterate_over_breakpoints): New function.
* breakpoint.h: Add conditional python includes. Add py_bp_object
and comment to struct breakpoint. Update all callers.
* defs.h: Add PyObject definition for GDB builds without Python.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Breakpoints In Python): Document "internal"
parameter, and visible attribute.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp: Add internal watchpoint and
breakpoint tests.
