Fix test names starting with uppercase output by basic functions
The following patch is based on the previous patch i sent and handles cases of test names that start with an uppercase letter. Test names should start with lowercase unless it starts with the name of a technology, architecture, ISA etc. This first patch addresses cases of test names output explicitly via xfail, kfail, kpass, fail, pass, unsupported, untested and also names set with the pattern "set test" and "set testname". gdb/testsuite/ChangeLog: 2016-12-01 Luis Machado <lgustavo@codesourcery.com> Fix test names starting with uppercase throughout all the files below. * gdb.ada/array_return.exp * gdb.ada/catch_ex.exp * gdb.ada/info_exc.exp * gdb.ada/mi_catch_ex.exp * gdb.ada/mi_dyn_arr.exp * gdb.ada/mi_ex_cond.exp * gdb.ada/mi_exc_info.exp * gdb.ada/mi_interface.exp * gdb.ada/mi_task_arg.exp * gdb.ada/mi_task_info.exp * gdb.ada/mi_var_array.exp * gdb.arch/alpha-step.exp * gdb.arch/amd64-disp-step.exp * gdb.arch/arm-disp-step.exp * gdb.arch/disp-step-insn-reloc.exp * gdb.arch/e500-prologue.exp * gdb.arch/ftrace-insn-reloc.exp * gdb.arch/gdb1558.exp * gdb.arch/i386-bp_permanent.exp * gdb.arch/i386-disp-step.exp * gdb.arch/i386-float.exp * gdb.arch/i386-gnu-cfi.exp * gdb.arch/ia64-breakpoint-shadow.exp * gdb.arch/mips16-thunks.exp * gdb.arch/pa-nullify.exp * gdb.arch/powerpc-aix-prologue.exp * gdb.arch/powerpc-power.exp * gdb.arch/ppc-dfp.exp * gdb.arch/s390-tdbregs.exp * gdb.arch/spu-info.exp * gdb.arch/spu-ls.exp * gdb.arch/thumb-bx-pc.exp * gdb.base/advance.exp * gdb.base/annota-input-while-running.exp * gdb.base/arrayidx.exp * gdb.base/asmlabel.exp * gdb.base/async.exp * gdb.base/attach-wait-input.exp * gdb.base/auto-connect-native-target.exp * gdb.base/batch-preserve-term-settings.exp * gdb.base/bfp-test.exp * gdb.base/bigcore.exp * gdb.base/bp-permanent.exp * gdb.base/break-always.exp * gdb.base/break-fun-addr.exp * gdb.base/break-idempotent.exp * gdb.base/break-main-file-remove-fail.exp * gdb.base/break-probes.exp * gdb.base/break-unload-file.exp * gdb.base/break.exp * gdb.base/call-ar-st.exp * gdb.base/call-rt-st.exp * gdb.base/call-sc.exp * gdb.base/call-signal-resume.exp * gdb.base/call-strs.exp * gdb.base/callexit.exp * gdb.base/callfuncs.exp * gdb.base/catch-gdb-caused-signals.exp * gdb.base/catch-signal-siginfo-cond.exp * gdb.base/catch-syscall.exp * gdb.base/compare-sections.exp * gdb.base/cond-eval-mode.exp * gdb.base/condbreak-call-false.exp * gdb.base/consecutive-step-over.exp * gdb.base/cursal.exp * gdb.base/disabled-location.exp * gdb.base/disasm-end-cu.exp * gdb.base/display.exp * gdb.base/double-prompt-target-event-error.exp * gdb.base/dprintf-bp-same-addr.exp * gdb.base/dprintf-detach.exp * gdb.base/dprintf-next.exp * gdb.base/dprintf-non-stop.exp * gdb.base/dprintf-pending.exp * gdb.base/dso2dso.exp * gdb.base/ending-run.exp * gdb.base/enum_cond.exp * gdb.base/examine-backward.exp * gdb.base/exe-lock.exp * gdb.base/exec-invalid-sysroot.exp * gdb.base/execl-update-breakpoints.exp * gdb.base/execution-termios.exp * gdb.base/fileio.exp * gdb.base/fixsection.exp * gdb.base/foll-exec-mode.exp * gdb.base/foll-exec.exp * gdb.base/fork-running-state.exp * gdb.base/frame-args.exp * gdb.base/fullpath-expand.exp * gdb.base/func-ptr.exp * gdb.base/gcore-relro-pie.exp * gdb.base/gdb1090.exp * gdb.base/gdb1555.exp * gdb.base/global-var-nested-by-dso.exp * gdb.base/gnu-ifunc.exp * gdb.base/hbreak-in-shr-unsupported.exp * gdb.base/hbreak-unmapped.exp * gdb.base/hook-stop.exp * gdb.base/infcall-input.exp * gdb.base/info-fun.exp * gdb.base/info-shared.exp * gdb.base/interrupt-noterm.exp * gdb.base/jit-so.exp * gdb.base/jit.exp * gdb.base/line-symtabs.exp * gdb.base/list.exp * gdb.base/longjmp.exp * gdb.base/macscp.exp * gdb.base/max-value-size.exp * gdb.base/nodebug.exp * gdb.base/nofield.exp * gdb.base/overlays.exp * gdb.base/paginate-after-ctrl-c-running.exp * gdb.base/paginate-bg-execution.exp * gdb.base/paginate-inferior-exit.exp * gdb.base/pending.exp * gdb.base/pr11022.exp * gdb.base/printcmds.exp * gdb.base/ptr-typedef.exp * gdb.base/ptype.exp * gdb.base/randomize.exp * gdb.base/range-stepping.exp * gdb.base/realname-expand.exp * gdb.base/relativedebug.exp * gdb.base/remote.exp * gdb.base/savedregs.exp * gdb.base/sepdebug.exp * gdb.base/set-noassign.exp * gdb.base/shlib-call.exp * gdb.base/shreloc.exp * gdb.base/sigaltstack.exp * gdb.base/sigbpt.exp * gdb.base/siginfo-addr.exp * gdb.base/siginfo-obj.exp * gdb.base/siginfo-thread.exp * gdb.base/signest.exp * gdb.base/signull.exp * gdb.base/sigrepeat.exp * gdb.base/skip.exp * gdb.base/so-impl-ld.exp * gdb.base/solib-corrupted.exp * gdb.base/solib-disc.exp * gdb.base/solib-display.exp * gdb.base/solib-overlap.exp * gdb.base/solib-search.exp * gdb.base/solib-symbol.exp * gdb.base/source-execution.exp * gdb.base/sss-bp-on-user-bp-2.exp * gdb.base/sss-bp-on-user-bp.exp * gdb.base/stack-checking.exp * gdb.base/stale-infcall.exp * gdb.base/step-break.exp * gdb.base/step-line.exp * gdb.base/step-over-exit.exp * gdb.base/step-test.exp * gdb.base/structs.exp * gdb.base/sym-file.exp * gdb.base/symtab-search-order.exp * gdb.base/term.exp * gdb.base/type-opaque.exp * gdb.base/unload.exp * gdb.base/until-nodebug.exp * gdb.base/until.exp * gdb.base/unwindonsignal.exp * gdb.base/watch-cond.exp * gdb.base/watch-non-mem.exp * gdb.base/watch_thread_num.exp * gdb.base/watchpoint-reuse-slot.exp * gdb.base/watchpoint-solib.exp * gdb.base/watchpoint.exp * gdb.btrace/dlopen.exp * gdb.cell/arch.exp * gdb.cell/break.exp * gdb.cell/bt.exp * gdb.cell/core.exp * gdb.cell/data.exp * gdb.cell/dwarfaddr.exp * gdb.cell/ea-cache.exp * gdb.cell/ea-standalone.exp * gdb.cell/ea-test.exp * gdb.cell/f-regs.exp * gdb.cell/fork.exp * gdb.cell/gcore.exp * gdb.cell/mem-access.exp * gdb.cell/ptype.exp * gdb.cell/registers.exp * gdb.cell/sizeof.exp * gdb.cell/solib-symbol.exp * gdb.cell/solib.exp * gdb.compile/compile-tls.exp * gdb.cp/exception.exp * gdb.cp/gdb2495.exp * gdb.cp/local.exp * gdb.cp/mb-inline.exp * gdb.cp/mb-templates.exp * gdb.cp/pr10687.exp * gdb.cp/pr9167.exp * gdb.cp/scope-err.exp * gdb.cp/templates.exp * gdb.cp/virtfunc.exp * gdb.dwarf2/dw2-dir-file-name.exp * gdb.dwarf2/dw2-single-line-discriminators.exp * gdb.fortran/complex.exp * gdb.fortran/library-module.exp * gdb.guile/guile.exp * gdb.guile/scm-cmd.exp * gdb.guile/scm-frame-inline.exp * gdb.guile/scm-objfile.exp * gdb.guile/scm-pretty-print.exp * gdb.guile/scm-symbol.exp * gdb.guile/scm-type.exp * gdb.guile/scm-value.exp * gdb.linespec/keywords.exp * gdb.linespec/ls-errs.exp * gdb.linespec/macro-relative.exp * gdb.linespec/thread.exp * gdb.mi/mi-breakpoint-changed.exp * gdb.mi/mi-dprintf-pending.exp * gdb.mi/mi-fullname-deleted.exp * gdb.mi/mi-logging.exp * gdb.mi/mi-pending.exp * gdb.mi/mi-solib.exp * gdb.mi/new-ui-mi-sync.exp * gdb.mi/user-selected-context-sync.exp * gdb.multi/dummy-frame-restore.exp * gdb.multi/multi-arch-exec.exp * gdb.multi/remove-inferiors.exp * gdb.multi/watchpoint-multi-exit.exp * gdb.opt/solib-intra-step.exp * gdb.perf/backtrace.exp * gdb.perf/single-step.exp * gdb.perf/skip-command.exp * gdb.perf/skip-prologue.exp * gdb.perf/solib.exp * gdb.python/lib-types.exp * gdb.python/py-as-string.exp * gdb.python/py-bad-printers.exp * gdb.python/py-block.exp * gdb.python/py-breakpoint.exp * gdb.python/py-cmd.exp * gdb.python/py-events.exp * gdb.python/py-evthreads.exp * gdb.python/py-finish-breakpoint.exp * gdb.python/py-finish-breakpoint2.exp * gdb.python/py-frame-inline.exp * gdb.python/py-frame.exp * gdb.python/py-inferior.exp * gdb.python/py-infthread.exp * gdb.python/py-mi.exp * gdb.python/py-objfile.exp * gdb.python/py-pp-maint.exp * gdb.python/py-pp-registration.exp * gdb.python/py-prettyprint.exp * gdb.python/py-recurse-unwind.exp * gdb.python/py-shared.exp * gdb.python/py-symbol.exp * gdb.python/py-symtab.exp * gdb.python/py-template.exp * gdb.python/py-type.exp * gdb.python/py-unwind-maint.exp * gdb.python/py-unwind.exp * gdb.python/py-value.exp * gdb.python/python.exp * gdb.reverse/finish-reverse-bkpt.exp * gdb.reverse/insn-reverse.exp * gdb.reverse/next-reverse-bkpt-over-sr.exp * gdb.reverse/solib-precsave.exp * gdb.reverse/solib-reverse.exp * gdb.stabs/gdb11479.exp * gdb.stabs/weird.exp * gdb.threads/fork-child-threads.exp * gdb.threads/fork-plus-threads.exp * gdb.threads/fork-thread-pending.exp * gdb.threads/forking-threads-plus-breakpoint.exp * gdb.threads/hand-call-in-threads.exp * gdb.threads/interrupted-hand-call.exp * gdb.threads/linux-dp.exp * gdb.threads/local-watch-wrong-thread.exp * gdb.threads/next-while-other-thread-longjmps.exp * gdb.threads/non-ldr-exit.exp * gdb.threads/pending-step.exp * gdb.threads/print-threads.exp * gdb.threads/process-dies-while-detaching.exp * gdb.threads/process-dies-while-handling-bp.exp * gdb.threads/pthreads.exp * gdb.threads/queue-signal.exp * gdb.threads/reconnect-signal.exp * gdb.threads/signal-command-handle-nopass.exp * gdb.threads/signal-command-multiple-signals-pending.exp * gdb.threads/signal-delivered-right-thread.exp * gdb.threads/signal-sigtrap.exp * gdb.threads/sigthread.exp * gdb.threads/staticthreads.exp * gdb.threads/stepi-random-signal.exp * gdb.threads/thread-unwindonsignal.exp * gdb.threads/thread_check.exp * gdb.threads/thread_events.exp * gdb.threads/tid-reuse.exp * gdb.threads/tls-nodebug.exp * gdb.threads/tls-shared.exp * gdb.threads/tls-so_extern.exp * gdb.threads/tls.exp * gdb.threads/wp-replication.exp * gdb.trace/actions-changed.exp * gdb.trace/actions.exp * gdb.trace/backtrace.exp * gdb.trace/change-loc.exp * gdb.trace/collection.exp * gdb.trace/deltrace.exp * gdb.trace/disconnected-tracing.exp * gdb.trace/entry-values.exp * gdb.trace/ftrace-lock.exp * gdb.trace/ftrace.exp * gdb.trace/infotrace.exp * gdb.trace/mi-trace-frame-collected.exp * gdb.trace/mi-trace-unavailable.exp * gdb.trace/mi-traceframe-changed.exp * gdb.trace/mi-tracepoint-changed.exp * gdb.trace/mi-tsv-changed.exp * gdb.trace/no-attach-trace.exp * gdb.trace/packetlen.exp * gdb.trace/passc-dyn.exp * gdb.trace/passcount.exp * gdb.trace/pending.exp * gdb.trace/pr16508.exp * gdb.trace/qtro.exp * gdb.trace/range-stepping.exp * gdb.trace/read-memory.exp * gdb.trace/report.exp * gdb.trace/save-trace.exp * gdb.trace/signal.exp * gdb.trace/stap-trace.exp * gdb.trace/status-stop.exp * gdb.trace/strace.exp * gdb.trace/tfile.exp * gdb.trace/tfind.exp * gdb.trace/trace-break.exp * gdb.trace/trace-condition.exp * gdb.trace/trace-enable-disable.exp * gdb.trace/trace-mt.exp * gdb.trace/tracecmd.exp * gdb.trace/tracefile-pseudo-reg.exp * gdb.trace/tspeed.exp * gdb.trace/tstatus.exp * gdb.trace/tsv.exp * gdb.trace/unavailable.exp * gdb.trace/while-dyn.exp * gdb.trace/while-stepping.exp * lib/gdb-guile.exp * lib/gdb.exp * lib/mi-support.exp * lib/pascal.exp * lib/perftest.exp * lib/prelink-support.exp * lib/selftest-support.exp
This commit is contained in:
Luis Machado
parent
88256e713c
commit
bc6c7af4a2
356 changed files with 1008 additions and 648 deletions
|
|
@ -1,3 +1,363 @@
|
|||
2016-12-01 Luis Machado <lgustavo@codesourcery.com>
|
||||
|
||||
Fix test names starting with uppercase throughout all the files below.
|
||||
|
||||
* gdb.ada/array_return.exp
|
||||
* gdb.ada/catch_ex.exp
|
||||
* gdb.ada/info_exc.exp
|
||||
* gdb.ada/mi_catch_ex.exp
|
||||
* gdb.ada/mi_dyn_arr.exp
|
||||
* gdb.ada/mi_ex_cond.exp
|
||||
* gdb.ada/mi_exc_info.exp
|
||||
* gdb.ada/mi_interface.exp
|
||||
* gdb.ada/mi_task_arg.exp
|
||||
* gdb.ada/mi_task_info.exp
|
||||
* gdb.ada/mi_var_array.exp
|
||||
* gdb.arch/alpha-step.exp
|
||||
* gdb.arch/amd64-disp-step.exp
|
||||
* gdb.arch/arm-disp-step.exp
|
||||
* gdb.arch/disp-step-insn-reloc.exp
|
||||
* gdb.arch/e500-prologue.exp
|
||||
* gdb.arch/ftrace-insn-reloc.exp
|
||||
* gdb.arch/gdb1558.exp
|
||||
* gdb.arch/i386-bp_permanent.exp
|
||||
* gdb.arch/i386-disp-step.exp
|
||||
* gdb.arch/i386-float.exp
|
||||
* gdb.arch/i386-gnu-cfi.exp
|
||||
* gdb.arch/ia64-breakpoint-shadow.exp
|
||||
* gdb.arch/mips16-thunks.exp
|
||||
* gdb.arch/pa-nullify.exp
|
||||
* gdb.arch/powerpc-aix-prologue.exp
|
||||
* gdb.arch/powerpc-power.exp
|
||||
* gdb.arch/ppc-dfp.exp
|
||||
* gdb.arch/s390-tdbregs.exp
|
||||
* gdb.arch/spu-info.exp
|
||||
* gdb.arch/spu-ls.exp
|
||||
* gdb.arch/thumb-bx-pc.exp
|
||||
* gdb.base/advance.exp
|
||||
* gdb.base/annota-input-while-running.exp
|
||||
* gdb.base/arrayidx.exp
|
||||
* gdb.base/asmlabel.exp
|
||||
* gdb.base/async.exp
|
||||
* gdb.base/attach-wait-input.exp
|
||||
* gdb.base/auto-connect-native-target.exp
|
||||
* gdb.base/batch-preserve-term-settings.exp
|
||||
* gdb.base/bfp-test.exp
|
||||
* gdb.base/bigcore.exp
|
||||
* gdb.base/bp-permanent.exp
|
||||
* gdb.base/break-always.exp
|
||||
* gdb.base/break-fun-addr.exp
|
||||
* gdb.base/break-idempotent.exp
|
||||
* gdb.base/break-main-file-remove-fail.exp
|
||||
* gdb.base/break-probes.exp
|
||||
* gdb.base/break-unload-file.exp
|
||||
* gdb.base/break.exp
|
||||
* gdb.base/call-ar-st.exp
|
||||
* gdb.base/call-rt-st.exp
|
||||
* gdb.base/call-sc.exp
|
||||
* gdb.base/call-signal-resume.exp
|
||||
* gdb.base/call-strs.exp
|
||||
* gdb.base/callexit.exp
|
||||
* gdb.base/callfuncs.exp
|
||||
* gdb.base/catch-gdb-caused-signals.exp
|
||||
* gdb.base/catch-signal-siginfo-cond.exp
|
||||
* gdb.base/catch-syscall.exp
|
||||
* gdb.base/compare-sections.exp
|
||||
* gdb.base/cond-eval-mode.exp
|
||||
* gdb.base/condbreak-call-false.exp
|
||||
* gdb.base/consecutive-step-over.exp
|
||||
* gdb.base/cursal.exp
|
||||
* gdb.base/disabled-location.exp
|
||||
* gdb.base/disasm-end-cu.exp
|
||||
* gdb.base/display.exp
|
||||
* gdb.base/double-prompt-target-event-error.exp
|
||||
* gdb.base/dprintf-bp-same-addr.exp
|
||||
* gdb.base/dprintf-detach.exp
|
||||
* gdb.base/dprintf-next.exp
|
||||
* gdb.base/dprintf-non-stop.exp
|
||||
* gdb.base/dprintf-pending.exp
|
||||
* gdb.base/dso2dso.exp
|
||||
* gdb.base/ending-run.exp
|
||||
* gdb.base/enum_cond.exp
|
||||
* gdb.base/examine-backward.exp
|
||||
* gdb.base/exe-lock.exp
|
||||
* gdb.base/exec-invalid-sysroot.exp
|
||||
* gdb.base/execl-update-breakpoints.exp
|
||||
* gdb.base/execution-termios.exp
|
||||
* gdb.base/fileio.exp
|
||||
* gdb.base/fixsection.exp
|
||||
* gdb.base/foll-exec-mode.exp
|
||||
* gdb.base/foll-exec.exp
|
||||
* gdb.base/fork-running-state.exp
|
||||
* gdb.base/frame-args.exp
|
||||
* gdb.base/fullpath-expand.exp
|
||||
* gdb.base/func-ptr.exp
|
||||
* gdb.base/gcore-relro-pie.exp
|
||||
* gdb.base/gdb1090.exp
|
||||
* gdb.base/gdb1555.exp
|
||||
* gdb.base/global-var-nested-by-dso.exp
|
||||
* gdb.base/gnu-ifunc.exp
|
||||
* gdb.base/hbreak-in-shr-unsupported.exp
|
||||
* gdb.base/hbreak-unmapped.exp
|
||||
* gdb.base/hook-stop.exp
|
||||
* gdb.base/infcall-input.exp
|
||||
* gdb.base/info-fun.exp
|
||||
* gdb.base/info-shared.exp
|
||||
* gdb.base/interrupt-noterm.exp
|
||||
* gdb.base/jit-so.exp
|
||||
* gdb.base/jit.exp
|
||||
* gdb.base/line-symtabs.exp
|
||||
* gdb.base/list.exp
|
||||
* gdb.base/longjmp.exp
|
||||
* gdb.base/macscp.exp
|
||||
* gdb.base/max-value-size.exp
|
||||
* gdb.base/nodebug.exp
|
||||
* gdb.base/nofield.exp
|
||||
* gdb.base/overlays.exp
|
||||
* gdb.base/paginate-after-ctrl-c-running.exp
|
||||
* gdb.base/paginate-bg-execution.exp
|
||||
* gdb.base/paginate-inferior-exit.exp
|
||||
* gdb.base/pending.exp
|
||||
* gdb.base/pr11022.exp
|
||||
* gdb.base/printcmds.exp
|
||||
* gdb.base/ptr-typedef.exp
|
||||
* gdb.base/ptype.exp
|
||||
* gdb.base/randomize.exp
|
||||
* gdb.base/range-stepping.exp
|
||||
* gdb.base/realname-expand.exp
|
||||
* gdb.base/relativedebug.exp
|
||||
* gdb.base/remote.exp
|
||||
* gdb.base/savedregs.exp
|
||||
* gdb.base/sepdebug.exp
|
||||
* gdb.base/set-noassign.exp
|
||||
* gdb.base/shlib-call.exp
|
||||
* gdb.base/shreloc.exp
|
||||
* gdb.base/sigaltstack.exp
|
||||
* gdb.base/sigbpt.exp
|
||||
* gdb.base/siginfo-addr.exp
|
||||
* gdb.base/siginfo-obj.exp
|
||||
* gdb.base/siginfo-thread.exp
|
||||
* gdb.base/signest.exp
|
||||
* gdb.base/signull.exp
|
||||
* gdb.base/sigrepeat.exp
|
||||
* gdb.base/skip.exp
|
||||
* gdb.base/so-impl-ld.exp
|
||||
* gdb.base/solib-corrupted.exp
|
||||
* gdb.base/solib-disc.exp
|
||||
* gdb.base/solib-display.exp
|
||||
* gdb.base/solib-overlap.exp
|
||||
* gdb.base/solib-search.exp
|
||||
* gdb.base/solib-symbol.exp
|
||||
* gdb.base/source-execution.exp
|
||||
* gdb.base/sss-bp-on-user-bp-2.exp
|
||||
* gdb.base/sss-bp-on-user-bp.exp
|
||||
* gdb.base/stack-checking.exp
|
||||
* gdb.base/stale-infcall.exp
|
||||
* gdb.base/step-break.exp
|
||||
* gdb.base/step-line.exp
|
||||
* gdb.base/step-over-exit.exp
|
||||
* gdb.base/step-test.exp
|
||||
* gdb.base/structs.exp
|
||||
* gdb.base/sym-file.exp
|
||||
* gdb.base/symtab-search-order.exp
|
||||
* gdb.base/term.exp
|
||||
* gdb.base/type-opaque.exp
|
||||
* gdb.base/unload.exp
|
||||
* gdb.base/until-nodebug.exp
|
||||
* gdb.base/until.exp
|
||||
* gdb.base/unwindonsignal.exp
|
||||
* gdb.base/watch-cond.exp
|
||||
* gdb.base/watch-non-mem.exp
|
||||
* gdb.base/watch_thread_num.exp
|
||||
* gdb.base/watchpoint-reuse-slot.exp
|
||||
* gdb.base/watchpoint-solib.exp
|
||||
* gdb.base/watchpoint.exp
|
||||
* gdb.btrace/dlopen.exp
|
||||
* gdb.cell/arch.exp
|
||||
* gdb.cell/break.exp
|
||||
* gdb.cell/bt.exp
|
||||
* gdb.cell/core.exp
|
||||
* gdb.cell/data.exp
|
||||
* gdb.cell/dwarfaddr.exp
|
||||
* gdb.cell/ea-cache.exp
|
||||
* gdb.cell/ea-standalone.exp
|
||||
* gdb.cell/ea-test.exp
|
||||
* gdb.cell/f-regs.exp
|
||||
* gdb.cell/fork.exp
|
||||
* gdb.cell/gcore.exp
|
||||
* gdb.cell/mem-access.exp
|
||||
* gdb.cell/ptype.exp
|
||||
* gdb.cell/registers.exp
|
||||
* gdb.cell/sizeof.exp
|
||||
* gdb.cell/solib-symbol.exp
|
||||
* gdb.cell/solib.exp
|
||||
* gdb.compile/compile-tls.exp
|
||||
* gdb.cp/exception.exp
|
||||
* gdb.cp/gdb2495.exp
|
||||
* gdb.cp/local.exp
|
||||
* gdb.cp/mb-inline.exp
|
||||
* gdb.cp/mb-templates.exp
|
||||
* gdb.cp/pr10687.exp
|
||||
* gdb.cp/pr9167.exp
|
||||
* gdb.cp/scope-err.exp
|
||||
* gdb.cp/templates.exp
|
||||
* gdb.cp/virtfunc.exp
|
||||
* gdb.dwarf2/dw2-dir-file-name.exp
|
||||
* gdb.dwarf2/dw2-single-line-discriminators.exp
|
||||
* gdb.fortran/complex.exp
|
||||
* gdb.fortran/library-module.exp
|
||||
* gdb.guile/guile.exp
|
||||
* gdb.guile/scm-cmd.exp
|
||||
* gdb.guile/scm-frame-inline.exp
|
||||
* gdb.guile/scm-objfile.exp
|
||||
* gdb.guile/scm-pretty-print.exp
|
||||
* gdb.guile/scm-symbol.exp
|
||||
* gdb.guile/scm-type.exp
|
||||
* gdb.guile/scm-value.exp
|
||||
* gdb.linespec/keywords.exp
|
||||
* gdb.linespec/ls-errs.exp
|
||||
* gdb.linespec/macro-relative.exp
|
||||
* gdb.linespec/thread.exp
|
||||
* gdb.mi/mi-breakpoint-changed.exp
|
||||
* gdb.mi/mi-dprintf-pending.exp
|
||||
* gdb.mi/mi-fullname-deleted.exp
|
||||
* gdb.mi/mi-logging.exp
|
||||
* gdb.mi/mi-pending.exp
|
||||
* gdb.mi/mi-solib.exp
|
||||
* gdb.mi/new-ui-mi-sync.exp
|
||||
* gdb.mi/user-selected-context-sync.exp
|
||||
* gdb.multi/dummy-frame-restore.exp
|
||||
* gdb.multi/multi-arch-exec.exp
|
||||
* gdb.multi/remove-inferiors.exp
|
||||
* gdb.multi/watchpoint-multi-exit.exp
|
||||
* gdb.opt/solib-intra-step.exp
|
||||
* gdb.perf/backtrace.exp
|
||||
* gdb.perf/single-step.exp
|
||||
* gdb.perf/skip-command.exp
|
||||
* gdb.perf/skip-prologue.exp
|
||||
* gdb.perf/solib.exp
|
||||
* gdb.python/lib-types.exp
|
||||
* gdb.python/py-as-string.exp
|
||||
* gdb.python/py-bad-printers.exp
|
||||
* gdb.python/py-block.exp
|
||||
* gdb.python/py-breakpoint.exp
|
||||
* gdb.python/py-cmd.exp
|
||||
* gdb.python/py-events.exp
|
||||
* gdb.python/py-evthreads.exp
|
||||
* gdb.python/py-finish-breakpoint.exp
|
||||
* gdb.python/py-finish-breakpoint2.exp
|
||||
* gdb.python/py-frame-inline.exp
|
||||
* gdb.python/py-frame.exp
|
||||
* gdb.python/py-inferior.exp
|
||||
* gdb.python/py-infthread.exp
|
||||
* gdb.python/py-mi.exp
|
||||
* gdb.python/py-objfile.exp
|
||||
* gdb.python/py-pp-maint.exp
|
||||
* gdb.python/py-pp-registration.exp
|
||||
* gdb.python/py-prettyprint.exp
|
||||
* gdb.python/py-recurse-unwind.exp
|
||||
* gdb.python/py-shared.exp
|
||||
* gdb.python/py-symbol.exp
|
||||
* gdb.python/py-symtab.exp
|
||||
* gdb.python/py-template.exp
|
||||
* gdb.python/py-type.exp
|
||||
* gdb.python/py-unwind-maint.exp
|
||||
* gdb.python/py-unwind.exp
|
||||
* gdb.python/py-value.exp
|
||||
* gdb.python/python.exp
|
||||
* gdb.reverse/finish-reverse-bkpt.exp
|
||||
* gdb.reverse/insn-reverse.exp
|
||||
* gdb.reverse/next-reverse-bkpt-over-sr.exp
|
||||
* gdb.reverse/solib-precsave.exp
|
||||
* gdb.reverse/solib-reverse.exp
|
||||
* gdb.stabs/gdb11479.exp
|
||||
* gdb.stabs/weird.exp
|
||||
* gdb.threads/fork-child-threads.exp
|
||||
* gdb.threads/fork-plus-threads.exp
|
||||
* gdb.threads/fork-thread-pending.exp
|
||||
* gdb.threads/forking-threads-plus-breakpoint.exp
|
||||
* gdb.threads/hand-call-in-threads.exp
|
||||
* gdb.threads/interrupted-hand-call.exp
|
||||
* gdb.threads/linux-dp.exp
|
||||
* gdb.threads/local-watch-wrong-thread.exp
|
||||
* gdb.threads/next-while-other-thread-longjmps.exp
|
||||
* gdb.threads/non-ldr-exit.exp
|
||||
* gdb.threads/pending-step.exp
|
||||
* gdb.threads/print-threads.exp
|
||||
* gdb.threads/process-dies-while-detaching.exp
|
||||
* gdb.threads/process-dies-while-handling-bp.exp
|
||||
* gdb.threads/pthreads.exp
|
||||
* gdb.threads/queue-signal.exp
|
||||
* gdb.threads/reconnect-signal.exp
|
||||
* gdb.threads/signal-command-handle-nopass.exp
|
||||
* gdb.threads/signal-command-multiple-signals-pending.exp
|
||||
* gdb.threads/signal-delivered-right-thread.exp
|
||||
* gdb.threads/signal-sigtrap.exp
|
||||
* gdb.threads/sigthread.exp
|
||||
* gdb.threads/staticthreads.exp
|
||||
* gdb.threads/stepi-random-signal.exp
|
||||
* gdb.threads/thread-unwindonsignal.exp
|
||||
* gdb.threads/thread_check.exp
|
||||
* gdb.threads/thread_events.exp
|
||||
* gdb.threads/tid-reuse.exp
|
||||
* gdb.threads/tls-nodebug.exp
|
||||
* gdb.threads/tls-shared.exp
|
||||
* gdb.threads/tls-so_extern.exp
|
||||
* gdb.threads/tls.exp
|
||||
* gdb.threads/wp-replication.exp
|
||||
* gdb.trace/actions-changed.exp
|
||||
* gdb.trace/actions.exp
|
||||
* gdb.trace/backtrace.exp
|
||||
* gdb.trace/change-loc.exp
|
||||
* gdb.trace/collection.exp
|
||||
* gdb.trace/deltrace.exp
|
||||
* gdb.trace/disconnected-tracing.exp
|
||||
* gdb.trace/entry-values.exp
|
||||
* gdb.trace/ftrace-lock.exp
|
||||
* gdb.trace/ftrace.exp
|
||||
* gdb.trace/infotrace.exp
|
||||
* gdb.trace/mi-trace-frame-collected.exp
|
||||
* gdb.trace/mi-trace-unavailable.exp
|
||||
* gdb.trace/mi-traceframe-changed.exp
|
||||
* gdb.trace/mi-tracepoint-changed.exp
|
||||
* gdb.trace/mi-tsv-changed.exp
|
||||
* gdb.trace/no-attach-trace.exp
|
||||
* gdb.trace/packetlen.exp
|
||||
* gdb.trace/passc-dyn.exp
|
||||
* gdb.trace/passcount.exp
|
||||
* gdb.trace/pending.exp
|
||||
* gdb.trace/pr16508.exp
|
||||
* gdb.trace/qtro.exp
|
||||
* gdb.trace/range-stepping.exp
|
||||
* gdb.trace/read-memory.exp
|
||||
* gdb.trace/report.exp
|
||||
* gdb.trace/save-trace.exp
|
||||
* gdb.trace/signal.exp
|
||||
* gdb.trace/stap-trace.exp
|
||||
* gdb.trace/status-stop.exp
|
||||
* gdb.trace/strace.exp
|
||||
* gdb.trace/tfile.exp
|
||||
* gdb.trace/tfind.exp
|
||||
* gdb.trace/trace-break.exp
|
||||
* gdb.trace/trace-condition.exp
|
||||
* gdb.trace/trace-enable-disable.exp
|
||||
* gdb.trace/trace-mt.exp
|
||||
* gdb.trace/tracecmd.exp
|
||||
* gdb.trace/tracefile-pseudo-reg.exp
|
||||
* gdb.trace/tspeed.exp
|
||||
* gdb.trace/tstatus.exp
|
||||
* gdb.trace/tsv.exp
|
||||
* gdb.trace/unavailable.exp
|
||||
* gdb.trace/while-dyn.exp
|
||||
* gdb.trace/while-stepping.exp
|
||||
* lib/gdb-guile.exp
|
||||
* lib/gdb.exp
|
||||
* lib/mi-support.exp
|
||||
* lib/pascal.exp
|
||||
* lib/perftest.exp
|
||||
* lib/prelink-support.exp
|
||||
* lib/selftest-support.exp
|
||||
|
||||
2016-11-30 Simon Marchi <simon.marchi@polymtl.ca>
|
||||
|
||||
* Makefile.in: Include disable-implicit-rules.mk.
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ clean_restart ${testfile}
|
|||
# Start the inferior
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ set catch_exception_info \
|
|||
####################################
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
@ -88,7 +88,7 @@ gdb_test "continue" \
|
|||
# - continue, the program exits.
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
@ -149,7 +149,7 @@ gdb_test "continue" \
|
|||
# the program.
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ if {[gdb_compile_ada "${srcfile}" "${binfile}" executable [list debug]] != "" }
|
|||
clean_restart ${testfile}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ set eol "\[\r\n\]+"
|
|||
clean_restart ${testfile}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
@ -70,7 +70,7 @@ mi_gdb_load ${binfile}
|
|||
####################################
|
||||
|
||||
if ![mi_run_to_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
@ -126,7 +126,7 @@ continue_to_exception \
|
|||
# - continue, the program exits.
|
||||
|
||||
if ![mi_run_to_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
|
|||
mi_gdb_load ${binfile}
|
||||
|
||||
if ![mi_run_to_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ set eol "\[\r\n\]+"
|
|||
clean_restart ${testfile}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ if [mi_gdb_start] {
|
|||
}
|
||||
|
||||
if ![mi_run_to_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
|
|||
mi_gdb_load ${binfile}
|
||||
|
||||
if ![mi_run_to_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ mi_gdb_load ${binfile}
|
|||
mi_gdb_test "-gdb-set debug-file-directory \"\"" ".*"
|
||||
|
||||
if ![mi_runto "task_switch.break_me"] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ mi_gdb_load ${binfile}
|
|||
####################################
|
||||
|
||||
if ![mi_runto "task_switch.break_me"] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ mi_gdb_reinitialize_dir $srcdir/$subdir
|
|||
mi_gdb_load ${binfile}
|
||||
|
||||
if ![mi_run_to_main] then {
|
||||
fail "Cannot run to main, testcase aborted"
|
||||
fail "cannot run to main, testcase aborted"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ set srcfile ${testfile}.c
|
|||
set binfile ${objdir}/${subdir}/${testfile}
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
|
||||
unsupported "Testcase compile failed."
|
||||
unsupported "testcase compile failed."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -38,7 +38,7 @@ proc test_stepi {function } {
|
|||
# of the previous tests, this makes sure that it doesn't affect
|
||||
# this series of tests.
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@ gdb_test "set displaced-stepping on" ""
|
|||
gdb_test "show displaced-stepping" ".* displaced stepping .* is on.*"
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -413,7 +413,7 @@ proc test_add_rn_pc {} {
|
|||
gdb_test_no_output "set displaced-stepping off"
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
|
|||
}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -53,7 +53,7 @@ proc read_testcase { n } {
|
|||
|
||||
set n_testcases [get_integer_valueof "n_testcases" 0]
|
||||
if { ${n_testcases} == 0 } {
|
||||
untested "No instruction relocation to test"
|
||||
untested "no instruction relocation to test"
|
||||
return 1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ set testfile "e500-prologue"
|
|||
set srcfile ${testfile}.c
|
||||
set binfile ${objdir}/${subdir}/${testfile}
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
|
||||
unsupported "Testcase compile failed."
|
||||
unsupported "testcase compile failed."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ if [prepare_for_testing $expfile $executable $srcfile \
|
|||
}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main to check for trace support"
|
||||
fail "can't run to main to check for trace support"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -52,14 +52,14 @@ if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
|
|||
clean_restart ${executable}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main for ftrace tests"
|
||||
fail "can't run to main for ftrace tests"
|
||||
return 0
|
||||
}
|
||||
|
||||
gdb_reinitialize_dir $srcdir/$subdir
|
||||
|
||||
if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
|
||||
untested "Could not find IPA lib loaded"
|
||||
untested "could not find IPA lib loaded"
|
||||
return 1
|
||||
}
|
||||
|
||||
|
|
@ -82,7 +82,7 @@ proc read_testcase { n } {
|
|||
set n_testcases [gdb_readexpr "n_testcases"]
|
||||
|
||||
if { ${n_testcases} == 0 } {
|
||||
untested "No instruction relocation to test"
|
||||
untested "no instruction relocation to test"
|
||||
return 1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@ gdb_test "b sub2" "Breakpoint 3.*" "set breakpoint at sub2"
|
|||
|
||||
gdb_run_cmd
|
||||
|
||||
set test "Hits breakpoint at main after function called from main"
|
||||
set test "hits breakpoint at main after function called from main"
|
||||
gdb_test_multiple "" $test {
|
||||
-re "Breakpoint 1.*main .*$gdb_prompt $" {
|
||||
pass $test
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ set retcode [gdb_test_multiple "disassemble $function" "Disassemble function '$f
|
|||
}]
|
||||
|
||||
if {$retcode != 0} {
|
||||
fail "Disassemble failed, skipping entire test."
|
||||
fail "disassemble failed, skipping entire test."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -43,7 +43,7 @@ gdb_test "set displaced-stepping on" ""
|
|||
gdb_test "show displaced-stepping" ".* displaced stepping .* is on.*"
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ if { [prepare_for_testing break.exp $testfile $srcfile [list debug $additional_f
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -73,11 +73,11 @@ gdb_test "up 3" \
|
|||
|
||||
gdb_test_multiple "info frame" "Existence of the CFI inserted register" {
|
||||
-re "Stack level 3, frame at (0x\[0-9a-f\]+):.*Saved registers:.* ecx at (0x\[0-9a-f\]+),.*" {
|
||||
pass "Existence of the CFI inserted register"
|
||||
pass "existence of the CFI inserted register"
|
||||
if { [string compare $expect_out(1,string) $expect_out(2,string)] } then {
|
||||
fail "Value of the CFI inserted register"
|
||||
fail "value of the CFI inserted register"
|
||||
} else {
|
||||
pass "Value of the CFI inserted register"
|
||||
pass "value of the CFI inserted register"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ set testfile ia64-breakpoint-shadow
|
|||
set srcfile ${testfile}.S
|
||||
set binfile ${objdir}/${subdir}/${testfile}
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
|
||||
untested "Couldn't compile test program"
|
||||
untested "couldn't compile test program"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@ gdb_compile ${srcfile} ${objfile} object ${options}
|
|||
set binfile [standard_output_file ${testname}]
|
||||
set options [list debug nowarnings]
|
||||
if { [gdb_compile ${objfiles} ${binfile} executable ${options}] != "" } then {
|
||||
unsupported "No MIPS16 support in the toolchain."
|
||||
unsupported "no MIPS16 support in the toolchain."
|
||||
return
|
||||
}
|
||||
clean_restart ${testname}
|
||||
|
|
@ -76,21 +76,21 @@ gdb_test_multiple "" "check for MIPS16 support in the processor" {
|
|||
verbose "MIPS16 support check successful."
|
||||
}
|
||||
-re "$gdb_prompt $" {
|
||||
unsupported "No MIPS16 support in the processor."
|
||||
unsupported "no MIPS16 support in the processor."
|
||||
return
|
||||
}
|
||||
default {
|
||||
unsupported "No MIPS16 support in the processor."
|
||||
unsupported "no MIPS16 support in the processor."
|
||||
return
|
||||
}
|
||||
}
|
||||
}
|
||||
-re "$gdb_prompt $" {
|
||||
unsupported "No MIPS16 support in the processor."
|
||||
unsupported "no MIPS16 support in the processor."
|
||||
return
|
||||
}
|
||||
default {
|
||||
unsupported "No MIPS16 support in the processor."
|
||||
unsupported "no MIPS16 support in the processor."
|
||||
return
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ set binfile ${objdir}/${subdir}/${testfile}
|
|||
set gcorefile ${objdir}/${subdir}/${testfile}.gcore
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
|
||||
unsupported "Testcase compile failed."
|
||||
unsupported "testcase compile failed."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ set testfile "powerpc-aix-prologue"
|
|||
set srcfile ${testfile}.c
|
||||
set binfile ${objdir}/${subdir}/${testfile}
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {}] != "" } {
|
||||
unsupported "Testcase compile failed."
|
||||
unsupported "testcase compile failed."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ proc instr_to_patt {offset instr} {
|
|||
proc func_check {offset instr} {
|
||||
global func
|
||||
|
||||
set test "Found $offset: $instr"
|
||||
set test "found $offset: $instr"
|
||||
if [regexp -nocase -line [instr_to_patt $offset $instr] $func] {
|
||||
pass $test
|
||||
} else {
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@ if ![test_compiler_info gcc*] {
|
|||
}
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {quiet debug}] != "" } {
|
||||
unsupported "This machine doesn't support Decimal Floating Point."
|
||||
unsupported "this machine doesn't support Decimal Floating Point."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -54,7 +54,7 @@ gdb_run_cmd
|
|||
# Unless the program bails out after checking AT_HWCAP.
|
||||
gdb_expect {
|
||||
-re "$inferior_exited_re with code 01.\[\r\n\]+$gdb_prompt $" {
|
||||
unsupported "This machine doesn't support Decimal Floating Point."
|
||||
unsupported "this machine doesn't support Decimal Floating Point."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,14 +36,14 @@ if { ![runto_main] } then {
|
|||
|
||||
gdb_test_multiple "next" "check for TE support" {
|
||||
-re "Program received signal SIGILL,.*\r\n$gdb_prompt $" {
|
||||
unsupported "No TE support."
|
||||
unsupported "no TE support."
|
||||
return
|
||||
}
|
||||
-re "\[0-9\]+.*\r\n$gdb_prompt $" {
|
||||
pass "TE support available"
|
||||
}
|
||||
-re "$gdb_prompt $" {
|
||||
unsupported "No TE support (unknown error)."
|
||||
unsupported "no TE support (unknown error)."
|
||||
return
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ proc c_to { marker } {
|
|||
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ gdb_reinitialize_dir $srcdir/$subdir
|
|||
gdb_load ${binfile}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ set srcfile ${testfile}.S
|
|||
set opts {}
|
||||
|
||||
if [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile} $opts] {
|
||||
untested "Failed to compile $srcfile"
|
||||
untested "failed to compile $srcfile"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug] == -1} {
|
|||
# Because runto_main doesn't know how to handle the prompt with annotations,
|
||||
# run to main before we set the annotation level.
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@
|
|||
standard_testfile .c
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
|
||||
untested "Couldn't compile ${srcfile}"
|
||||
untested "couldn't compile ${srcfile}"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -63,7 +63,7 @@ proc test_background {command before_prompt after_prompt {message ""}} {
|
|||
fail "$message"
|
||||
}
|
||||
-re ".*Asynchronous execution not supported on this target\..*" {
|
||||
unsupported "Asynchronous execution not supported: $message"
|
||||
unsupported "asynchronous execution not supported: $message"
|
||||
}
|
||||
timeout {
|
||||
fail "$message (timeout)"
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ proc start_program {binfile} {
|
|||
clean_restart $binfile
|
||||
|
||||
if ![runto setup_done] then {
|
||||
fail "Can't run to setup_done"
|
||||
fail "can't run to setup_done"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ gdb_test_multiple $test $test {
|
|||
}
|
||||
|
||||
if { !$have_native } {
|
||||
unsupported "No \"target native\" support."
|
||||
unsupported "no \"target native\" support."
|
||||
return
|
||||
}
|
||||
|
||||
|
|
@ -62,14 +62,14 @@ set topmost [get_topmost_target "check whether a target is already connected"]
|
|||
|
||||
# Testing against the extended-remote board, for example?
|
||||
if { $topmost != "exec" } {
|
||||
unsupported "Already connected to target $topmost."
|
||||
unsupported "already connected to target $topmost."
|
||||
return
|
||||
}
|
||||
|
||||
# Check which target this board connects to. If testing with a native
|
||||
# target board, this should cause the native target to auto connect.
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
@ -94,7 +94,7 @@ proc check_native_target {test} {
|
|||
|
||||
# Testing against a remote board, for example?
|
||||
if { ![check_native_target "check whether board tests the native target"] } {
|
||||
unsupported "Not testing the native target."
|
||||
unsupported "not testing the native target."
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ proc spawn_shell {} {
|
|||
|
||||
set res [remote_spawn host "/bin/sh"]
|
||||
if { $res < 0 || $res == "" } {
|
||||
unsupported "Spawning shell failed."
|
||||
unsupported "spawning shell failed."
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -19,7 +19,7 @@
|
|||
standard_testfile .c
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
|
||||
untested "Couldn't compile ${srcfile}"
|
||||
untested "couldn't compile ${srcfile}"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -21,7 +21,7 @@
|
|||
# mechanism that would let it efficiently access a remote corefile.
|
||||
|
||||
if ![isnative] then {
|
||||
untested "Remote system"
|
||||
untested "remote system"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
@ -34,7 +34,7 @@ if { [istarget "*-*-*bsd*"]
|
|||
|| [istarget "*-*-solaris*"]
|
||||
|| [istarget "*-*-darwin*"]
|
||||
|| [istarget "*-*-cygwin*"] } {
|
||||
untested "Kernel lacks sparse corefile support (PR gdb/1551)"
|
||||
untested "kernel lacks sparse corefile support (PR gdb/1551)"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
@ -146,7 +146,7 @@ foreach pat [list core.${inferior_pid} ${testfile}.core core] {
|
|||
}
|
||||
|
||||
if { $file == "" } {
|
||||
untested "Can't generate a core file"
|
||||
untested "can't generate a core file"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -110,7 +110,7 @@ proc test {always_inserted sw_watchpoint} {
|
|||
# Some targets (QEMU for one) will disallow writes to the
|
||||
# .text section under certain circumstances. It is no use
|
||||
# continuing with the test at this point. Just return.
|
||||
unsupported "Cannot modify memory"
|
||||
unsupported "cannot modify memory"
|
||||
return
|
||||
}
|
||||
-re " = .*$gdb_prompt $" {
|
||||
|
|
|
|||
|
|
@ -77,7 +77,7 @@ foreach test_value {0 1} {
|
|||
|
||||
# Some targets do not allow manually writing a breakpoint to a
|
||||
# certain memory address, like QEMU. In that case, just bail out.
|
||||
unsupported "Cannot write to address $bp_address"
|
||||
unsupported "cannot write to address $bp_address"
|
||||
return -1
|
||||
}
|
||||
-re " = .*$gdb_prompt $" {
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ set srcfile1 ${testfile1}.c
|
|||
set binfile1 [standard_output_file ${testfile1}]
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile1}" executable {debug}] != "" } {
|
||||
untested "Couldn't compile ${srcfile1}"
|
||||
untested "couldn't compile ${srcfile1}"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -65,7 +65,7 @@ set srcfile2 ${testfile2}.c
|
|||
set binfile2 [standard_output_file ${testfile2}]
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {
|
||||
untested "Couldn't compile ${srcfile2}"
|
||||
untested "couldn't compile ${srcfile2}"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
@ -127,7 +127,7 @@ proc test_break { always_inserted break_command } {
|
|||
delete_breakpoints
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -56,7 +56,7 @@ proc test_remove_bp { initial_load } {
|
|||
set GDBFLAGS $saved_gdbflags
|
||||
|
||||
if ![runto start] {
|
||||
fail "Can't run to start"
|
||||
fail "can't run to start"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ set probes_bp "dl_main"
|
|||
|
||||
if { [gdb_compile_shlib $srcfile_lib $binfile_lib \
|
||||
[list additional_flags=-fPIC]] != "" } {
|
||||
untested "Could not compile $binfile_lib."
|
||||
untested "could not compile $binfile_lib."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -60,7 +60,7 @@ proc test_break { initial_load always_inserted break_command } {
|
|||
set GDBFLAGS $saved_gdbflags
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -35,13 +35,13 @@ gdb_expect {
|
|||
send_gdb "y\n"
|
||||
gdb_expect {
|
||||
-re "$gdb_prompt $" {
|
||||
fail "Delete all breakpoints when none (unexpected prompt)"
|
||||
fail "delete all breakpoints when none (unexpected prompt)"
|
||||
}
|
||||
timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
|
||||
timeout { fail "delete all breakpoints when none (timeout after unexpected prompt)" }
|
||||
}
|
||||
}
|
||||
-re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" }
|
||||
timeout { fail "Delete all breakpoints when none (timeout)" }
|
||||
-re ".*$gdb_prompt $" { pass "delete all breakpoints when none" }
|
||||
timeout { fail "delete all breakpoints when none (timeout)" }
|
||||
}
|
||||
|
||||
#
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ standard_testfile
|
|||
# Some targets can't call functions, so don't even bother with this
|
||||
# test.
|
||||
if [target_info exists gdb,cannot_call_functions] {
|
||||
unsupported "This target can not call functions"
|
||||
unsupported "this target can not call functions"
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -40,7 +40,7 @@ if [get_compiler_info] {
|
|||
# Some targets can't do function calls, so don't even bother with this
|
||||
# test.
|
||||
if [target_info exists gdb,cannot_call_functions] {
|
||||
unsupported "This target can not call functions"
|
||||
unsupported "this target can not call functions"
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@
|
|||
# test.
|
||||
|
||||
if [target_info exists gdb,cannot_call_functions] {
|
||||
unsupported "This target can not call functions"
|
||||
unsupported "this target can not call functions"
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
|
|||
# Some targets can't do function calls, so don't even bother with this
|
||||
# test.
|
||||
if [target_info exists gdb,cannot_call_functions] {
|
||||
unsupported "This target can not call functions"
|
||||
unsupported "this target can not call functions"
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
@ -56,7 +56,7 @@ proc get_dummy_frame_number { } {
|
|||
clean_restart ${binfile}
|
||||
|
||||
if { ![runto_main] } {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ standard_testfile
|
|||
# Some targets can't call functions, so don't even bother with this
|
||||
# test.
|
||||
if [target_info exists gdb,cannot_call_functions] {
|
||||
unsupported "This target can not call functions"
|
||||
unsupported "this target can not call functions"
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
|
|||
# Some targets can't do function calls, so don't even bother with this
|
||||
# test.
|
||||
if [target_info exists gdb,cannot_call_functions] {
|
||||
unsupported "This target can not call functions"
|
||||
unsupported "this target can not call functions"
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
@ -33,7 +33,7 @@ if [target_info exists gdb,cannot_call_functions] {
|
|||
clean_restart ${binfile}
|
||||
|
||||
if { ![runto_main] } {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -26,7 +26,7 @@ if [support_complex_tests] {
|
|||
# Some targets can't do function calls, so don't even bother with this
|
||||
# test.
|
||||
if [target_info exists gdb,cannot_call_functions] {
|
||||
unsupported "This target can not call functions"
|
||||
unsupported "this target can not call functions"
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main to make the tests"
|
||||
fail "can't run to main to make the tests"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ if { [prepare_for_testing "failed to prepare" "${testfile}" $srcfile {debug}] }
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@ if { [prepare_for_testing ${testfile}.exp $testfile ${testfile}.c] } {
|
|||
# Check target supports catch syscall or not.
|
||||
clean_restart $binfile
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -78,7 +78,7 @@ gdb_test_multiple $command $test {
|
|||
|
||||
# Now get past startup code.
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@
|
|||
standard_testfile
|
||||
|
||||
if {[gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != ""} {
|
||||
untested "Couldn't compile $srcfile"
|
||||
untested "couldn't compile $srcfile"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ if { [prepare_for_testing ${testfile}.exp ${testfile}] } {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -29,21 +29,21 @@ set main_addr [get_hexadecimal_valueof "&main" "0"]
|
|||
set dummy_3_addr [get_hexadecimal_valueof "&dummy_3" "0"]
|
||||
|
||||
if {$main_addr == 0 || $dummy_3_addr == 0 || $dummy_3_addr <= $main_addr} {
|
||||
fail "Unable to extract required addresses, or addresses out of order"
|
||||
fail "unable to extract required addresses, or addresses out of order"
|
||||
return -1
|
||||
}
|
||||
|
||||
gdb_test_multiple "disassemble /m ${main_addr},${dummy_3_addr}" "Disassemble address range with source" {
|
||||
-re "Dump of assembler code from ${main_addr} to ${dummy_3_addr}:\r\nEnd of assembler dump\." {
|
||||
fail "No output from the disassemble command"
|
||||
fail "no output from the disassemble command"
|
||||
}
|
||||
-re "Line number 0 out of range;.* has $decimal lines\." {
|
||||
fail "The disassemble command failed"
|
||||
fail "the disassemble command failed"
|
||||
}
|
||||
-re "Dump of assembler code from ${main_addr} to ${dummy_3_addr}:\r\n.*main.*End of assembler dump\." {
|
||||
pass "disassemble command returned some output"
|
||||
}
|
||||
-re ".*$gdb_prompt $" {
|
||||
fail "Unexpected output from disassemble command"
|
||||
fail "unexpected output from disassemble command"
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ if !$use_gdb_stub {
|
|||
# Ok, on to real life
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Could not run to main - other tests will fail."
|
||||
fail "could not run to main - other tests will fail."
|
||||
continue
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ proc cancel_pagination_in_target_event { command } {
|
|||
clean_restart $binfile
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ proc test { style } {
|
|||
clean_restart $binfile
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ proc dprintf_detach_test { breakpoint_always_inserted dprintf_style disconnected
|
|||
gdb_test_no_output "set disconnected-dprintf ${disconnected_dprintf}"
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ if [prepare_for_testing "failed to prepare for dprintf with next" \
|
|||
}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@
|
|||
|
||||
if [is_remote target] then {
|
||||
# Testing with remote/non-stop is racy at the moment.
|
||||
unsupported "Testing dprintf with remote/non-stop is not supported."
|
||||
unsupported "testing dprintf with remote/non-stop is not supported."
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
@ -33,7 +33,7 @@ save_vars { GDBFLAGS } {
|
|||
}
|
||||
|
||||
if ![runto main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@ if { [get_compiler_info] } {
|
|||
|
||||
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|
||||
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
|
||||
untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
|
||||
untested "could not compile either $libsrc or $srcdir/$subdir/$srcfile."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -41,13 +41,13 @@ set binfile_libdso1 [standard_output_file $libdso1.so]
|
|||
|
||||
if { [gdb_compile_shlib $srcfile_libdso2 $binfile_libdso2 \
|
||||
[list debug additional_flags=-fPIC]] != "" } {
|
||||
untested "Could not compile $binfile_libdso2."
|
||||
untested "could not compile $binfile_libdso2."
|
||||
return -1
|
||||
}
|
||||
|
||||
if { [gdb_compile_shlib $srcfile_libdso1 $binfile_libdso1 \
|
||||
[list debug additional_flags=-fPIC]] != "" } {
|
||||
untested "Could not compile $binfile_libdso1."
|
||||
untested "could not compile $binfile_libdso1."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -270,7 +270,7 @@ if {!$use_gdb_stub
|
|||
set exec_output [remote_exec host "ls core"]
|
||||
|
||||
if [ regexp "core not found" $exec_output] {
|
||||
pass "No core dumped on quit"
|
||||
pass "no core dumped on quit"
|
||||
} else {
|
||||
if [ regexp "No such file or directory" $exec_output] {
|
||||
pass "ls: core (No core dumped on quit)"
|
||||
|
|
|
|||
|
|
@ -21,7 +21,7 @@ standard_testfile .c
|
|||
|
||||
set opts [list debug additional_flags=-fshort-enums]
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $opts] != "" } {
|
||||
untested "Could not compile ${srcfile}"
|
||||
untested "could not compile ${srcfile}"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ proc get_first_mapped_address {} {
|
|||
set addr $expect_out(1,string)
|
||||
}
|
||||
-re "$gdb_prompt $" {
|
||||
unsupported "Current target does not support 'info proc mappings'"
|
||||
unsupported "current target does not support 'info proc mappings'"
|
||||
}
|
||||
}
|
||||
return ${addr}
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ standard_testfile arrayidx.c
|
|||
append binfile $EXEEXT
|
||||
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
|
||||
untested "Couldn't compile ${srcfile}"
|
||||
untested "couldn't compile ${srcfile}"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@ proc do_exec_sysroot_test {} {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile}"
|
||||
fail "couldn't run ${testfile}"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ if { [gdb_compile $objfile $exec1 executable $opts1_ld] != "" } {
|
|||
|
||||
clean_restart ${exec1}
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run to main"
|
||||
fail "couldn't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -70,7 +70,7 @@ gdb_test_multiple "p/x &main" $test {
|
|||
|
||||
clean_restart ${exec2}
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run to main"
|
||||
fail "couldn't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -103,7 +103,7 @@ proc test { always_inserted } {
|
|||
gdb_test_no_output "set breakpoint always-inserted $always_inserted"
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run to main"
|
||||
fail "couldn't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
|
|||
proc test { prefix body } {
|
||||
with_test_prefix $prefix {
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
uplevel 1 $body
|
||||
|
|
|
|||
|
|
@ -225,7 +225,7 @@ gdb_test continue \
|
|||
"Continuing\\..*rename 2:.*EISDIR$stop_msg" \
|
||||
"Renaming a file to existing directory returns EISDIR"
|
||||
|
||||
set test "Renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST"
|
||||
set test "renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST"
|
||||
gdb_test_multiple continue "${test}" {
|
||||
-re "Continuing\\..*rename 3:.*(ENOTEMPTY|EEXIST)$stop_msg$gdb_prompt $" {
|
||||
pass "${test}"
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ if [get_compiler_info] {
|
|||
if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
|
||||
|| [gdb_compile $srcdir/$subdir/$srcfile $binfile \
|
||||
executable $exec_opts] != ""} {
|
||||
untested "Could not compile either $libsrc or $srcfile."
|
||||
untested "could not compile either $libsrc or $srcfile."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -47,7 +47,7 @@ gdb_load ${binfile}
|
|||
gdb_load_shlib ${lib_sl}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,7 @@ proc do_catch_exec_test { } {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile}"
|
||||
fail "couldn't run ${testfile}"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
@ -109,7 +109,7 @@ proc do_follow_exec_mode_tests { mode cmd infswitch } {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile}"
|
||||
fail "couldn't run ${testfile}"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ proc do_exec_tests {} {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile}"
|
||||
fail "couldn't run ${testfile}"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
@ -75,7 +75,7 @@ proc do_exec_tests {} {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile}"
|
||||
fail "couldn't run ${testfile}"
|
||||
return
|
||||
}
|
||||
# Execute the code setting up variable PROG.
|
||||
|
|
@ -162,7 +162,7 @@ proc do_exec_tests {} {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile} (2nd try)"
|
||||
fail "couldn't run ${testfile} (2nd try)"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
@ -231,7 +231,7 @@ proc do_exec_tests {} {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile} (3rd try)"
|
||||
fail "couldn't run ${testfile} (3rd try)"
|
||||
return
|
||||
}
|
||||
# Execute the code setting up variable PROG.
|
||||
|
|
@ -296,7 +296,7 @@ proc do_exec_tests {} {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile} (4th try)"
|
||||
fail "couldn't run ${testfile} (4th try)"
|
||||
return
|
||||
}
|
||||
# Execute the code setting up variable PROG.
|
||||
|
|
@ -355,7 +355,7 @@ proc do_exec_tests {} {
|
|||
# Start the program running, and stop at main.
|
||||
#
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run ${testfile} (5th try)"
|
||||
fail "couldn't run ${testfile} (5th try)"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ proc do_test { detach_on_fork follow_fork non_stop schedule_multiple } {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@
|
|||
|
||||
standard_testfile .c
|
||||
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
|
||||
untested "Couldn't compile ${srcfile}"
|
||||
untested "couldn't compile ${srcfile}"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@
|
|||
standard_testfile .c fullpath-expand-func.c
|
||||
|
||||
if [is_remote host] {
|
||||
unsupported "Compiling on a remote host does not support a filename with directory."
|
||||
unsupported "compiling on a remote host does not support a filename with directory."
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ if { [prepare_for_testing func-ptr.exp "func-ptr" {func-ptr.c} {debug}] } {
|
|||
}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ clean_restart ${stripped_binfile}
|
|||
|
||||
# The binary is stripped of debug info, but not minsyms.
|
||||
if ![runto break_here] {
|
||||
fail "Can't run to break_here"
|
||||
fail "can't run to break_here"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@ clean_restart ${binfile}
|
|||
gdb_load_shlib $libobj
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 0
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -29,13 +29,13 @@ set binfile_lib2 [standard_output_file $lib2name.so]
|
|||
|
||||
if { [gdb_compile_shlib $srcfile_lib1 $binfile_lib1 \
|
||||
[list debug additional_flags=-fPIC]] != "" } {
|
||||
untested "Could not compile $binfile_lib1."
|
||||
untested "could not compile $binfile_lib1."
|
||||
return -1
|
||||
}
|
||||
|
||||
if { [gdb_compile_shlib $srcfile_lib2 $binfile_lib2 \
|
||||
[list debug additional_flags=-fPIC]] != "" } {
|
||||
untested "Could not compile $binfile_lib2."
|
||||
untested "could not compile $binfile_lib2."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ if [get_compiler_info] {
|
|||
|
||||
if { [gdb_compile_shlib ${srcdir}/${subdir}/$libsrc $lib_so $lib_opts] != ""
|
||||
|| [gdb_compile ${srcdir}/${subdir}/$srcfile $binfile executable $exec_opts] != ""} {
|
||||
untested "Could not compile dynamic executable $binfile."
|
||||
untested "could not compile dynamic executable $binfile."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -62,7 +62,7 @@ clean_restart $executable
|
|||
gdb_load_shlib ${lib_so}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return 1
|
||||
}
|
||||
|
||||
|
|
@ -144,7 +144,7 @@ gdb_test "info sym $expect_out(1,string)" "gnu_ifunc in section .*" "info sym <g
|
|||
|
||||
if { [gdb_compile ${srcdir}/${subdir}/$libsrc $lib_o object {}] != ""
|
||||
|| [gdb_compile "${srcdir}/${subdir}/$srcfile $lib_o" $staticbinfile executable {debug}] != "" } {
|
||||
untested "Could not compile static executable $staticbinfile."
|
||||
untested "could not compile static executable $staticbinfile."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ if [get_compiler_info] {
|
|||
|
||||
if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib_src} ${lib_so} $lib_opts] != ""
|
||||
|| [gdb_compile ${srcdir}/${subdir}/${main_src} ${binfile} executable $exec_opts] != ""} {
|
||||
untested "Could not compile ${subdir}/$lib_src or ${subdir}/$srcfile."
|
||||
untested "could not compile ${subdir}/$lib_src or ${subdir}/$srcfile."
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
@ -44,7 +44,7 @@ clean_restart $binfile
|
|||
gdb_load_shlib $lib_so
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -24,13 +24,13 @@ if {[prepare_for_testing "failed to prepare" ${testfile} ${srcfile}]} {
|
|||
}
|
||||
|
||||
if ![runto_main] {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
# If we can read the memory at address 0, skip the test.
|
||||
if { [is_address_zero_readable] } {
|
||||
untested "Memory at address 0 is readable"
|
||||
untested "memory at address 0 is readable"
|
||||
return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -40,7 +40,7 @@ proc setup {commands} {
|
|||
clean_restart $binfile
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Can't run to main"
|
||||
fail "can't run to main"
|
||||
return -code return
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@ if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
|
|||
}
|
||||
|
||||
if ![runto_main] then {
|
||||
fail "Couldn't run to main"
|
||||
fail "couldn't run to main"
|
||||
return -1
|
||||
}
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Reference in a new issue