I believe this fixes all the pager output problems with styling that
Philippe pointed out, plus at least one more. The patch is somewhat
hard to reason about, so you may wish to give it a try. Even writing
the tests was hard.
This removes the style caching, because it was difficult to keep the
style cache correct in all cases. Since this would cause more style
escapes to be emitted, instead it changes fputs_styled to try to avoid
unnecessary changes.
Another bug was that the wrap buffer was not flushed in the case where
wrap_column==0. In the old (pre-patch series) code, characters were
directly emitted in this case; so flushing the wrap buffer here
restores this behavior.
On error the wrap buffer must be emptied. Otherwise, interrupting
output can leave characters in the buffer that will be emitted later.
As discussed on gdb-patches, this fixes the ada-lang.c problem where
filtered and unfiltered printing were mixed. Now user_select_syms
uses filtered printing, which is what its callees were already doing.
Finally, it was possible for source line highlighting to be garbled
(and invalid escape sequences emitted) if the pager was invoked at the
wrong spot. To fix this, the patch arranges for source line escapes
to always be emitted as a unit.
gdb/ChangeLog
2019-02-17 Tom Tromey <tom@tromey.com>
* ada-lang.c (user_select_syms): Use filtered printing.
* utils.c (wrap_style): New global.
(desired_style): Remove.
(emit_style_escape): Add stream parameter.
(set_output_style, reset_terminal_style, prompt_for_continue):
Update.
(flush_wrap_buffer): Only flush gdb_stdout.
(wrap_here): Set wrap_style.
(fputs_maybe_filtered): Clear the wrap buffer on exception. Don't
treat escape sequences as a character. Change when wrap buffer is
flushed.
(fputs_styled): Do not set the output style when the default is
requested.
* ui-style.h (struct ui_file_style) <is_default>: New method.
* source.c (print_source_lines_base): Emit escape sequences in one
piece.
gdb/testsuite/ChangeLog
2019-02-17 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add line-wrapping tests.
* gdb.base/page.exp: Add test for quitting during pagination.
This removes the ALL_OBJFILES and ALL_FILETABS macros, replacing them
with ranged for loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (find_line_symtab, info_sources_command)
(make_source_files_completion_list): Use objfile_compunits.
* source.c (select_source_symtab): Use objfile_compunits.
* objfiles.h (struct objfile): Update comment.
(ALL_OBJFILES): Remove.
(ALL_FILETABS): Remove.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Use
objfile_compunits.
This removes ALL_OBJFILE_FILETABS, replacing its uses with ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Use compunit_filetabs.
* source.c (forget_cached_source_info_for_objfile): Use
compunit_filetabs.
* objfiles.h (ALL_OBJFILE_FILETABS): Remove.
(ALL_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Use compunit_filetabs.
This removes ALL_COMPUNIT_FILETABS, replacing its uses with ranged for
loops.
Because this is still used in the ALL_OBJFILE_FILETABS macro, in some
places a declaration had to be removed or renamed to avoid shadowing.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.h (ALL_COMPUNIT_FILETABS): Remove.
(compunit_filetabs): New.
* symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use
compunit_filetabs.
(info_sources_command, make_source_files_completion_list): Remove
declaration.
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Remove declaration.
(maintenance_info_symtabs): Use compunit_filetabs.
(maintenance_info_line_tables): Likewise.
* source.c (select_source_symtab): Change local variable name.
(forget_cached_source_info_for_objfile): Remove declaration.
* objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Remove declaration.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove
declaration.
* maint.c (count_symtabs_and_blocks): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Remove declaration.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
compunit_filetabs.
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
This removes the ALL_PSPACE_OBJFILES macro in favor of ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* probe.c (parse_probes_in_pspace): Use all_objfiles.
* guile/scm-progspace.c (gdbscm_progspace_objfiles): Use
all_objfiles.
* objfiles.h (ALL_PSPACE_OBJFILES): Remove.
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics, maintenance_print_objfiles)
(maintenance_info_symtabs, maintenance_check_symtabs)
(maintenance_expand_symtabs, maintenance_info_line_tables): Use
all_objfiles.
* source.c (forget_cached_source_info): Use all_objfiles.
* symfile-debug.c (set_debug_symfile): Use all_objfiles.
* elfread.c (elf_gnu_ifunc_resolve_by_cache)
(elf_gnu_ifunc_resolve_by_got): Use all_objfiles.
* objfiles.c (update_section_map): Use all_objfiles.
(shared_objfile_contains_address_p): Likewise.
* psymtab.c (maintenance_info_psymtabs): Use all_objfiles.
* python/py-progspace.c (pspy_get_objfiles): Use all_objfiles.
When printing source lines with calls to print_source_lines we need to
pass a start line number and an end line number. The end line number
is calculated by calling get_lines_to_list and adding this value to
the start line number. For example this code from list_command:
print_source_lines (cursal.symtab, first,
first + get_lines_to_list (), 0);
The problem is that get_lines_to_list returns a value based on the
GDB setting `set listsize LISTSIZE`. By default LISTSIZE is 10,
however, its also possible to set LISTSIZE to unlimited, in which
case get_lines_to_list will return INT_MAX.
As the parameter signature for print_source_lines is:
void print_source_lines (struct symtab *, int, int,
print_source_lines_flags);
and `first` in the above code is an `int`, then when LISTSIZE is
`unlimited` the above code will result in signed integer overflow,
which is undefined.
The solution in this patch is a new class source_lines_range that can
be constructed from a single line number and a direction (forward or
backward). The range is then constructed from the line number and the
value of get_lines_to_list.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Pass a source_lines_range to
print_source_lines.
* source.c (print_source_lines_base): Update line number check.
(print_source_lines): New function.
(source_lines_range::source_lines_range): New function.
* source.h (class source_lines_range): New class.
(print_source_lines): New declaration.
Declarations for functions in source.c are split between source.h and
symtab.h. This commit moves the small number that are in symtab.h
into source.h. There's just one file that needs to add an include of
source.h in order to build.
I've moved the function header comments from source.c to source.h
inline with the recommended GDB style.
gdb/ChangeLog:
* source.c (select_source_symtab): Move header comment to
declaration in source.h.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(identify_source_line): Likewise.
* source.h (identify_source_line): Move declaration from symtab.h
and add comment from source.c
(print_source_lines): Likewise.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(select_source_symtab): Likewise.
(enum print_source_lines_flag): Move definition from symtab.h.
* symtab.h (identify_source_line): Move declaration to source.h.
(print_source_lines): Likewise.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(select_source_symtab): Likewise.
(enum print_source_lines_flag): Move definition to source.h.
* tui/tui-hooks.c: Add 'source.h' include.
...by which I mean from high line number to low, not, actually
backward character by character!
Commit:
commit 62f29fda90
Date: Tue Oct 9 22:21:05 2018 -0600
Highlight source code using GNU Source Highlight
introduced a regression in the test gdb.linespec/explicit.exp, in
which a request is made to GDB to print a reverse sequence of lines,
from +10 to -10 from the current line number. The expected behaviour
is that GDB prints nothing. The above commit changed this so that GDB
now prints:
Line number 32 out of range; /path/to/gdb/testsuite/gdb.linespec/explicit.c has 71 lines.
which is a little confusing.
This commit fixes the regression, and restores the behaviour that GDB
prints nothing.
While I was passing I noticed a call to `back` on a std::string that I
was concerned could be empty if the request for source lines returns
an empty string. I don't know if it would be possible for a request
for lines to return an empty string, I guess it should be impossible,
in which case, maybe this should be an assertion, but adding a `empty`
check, seems like an easy and cheap safety net.
gdb/ChangeLog:
* source.c (print_source_lines_base): Handle requests to print
reverse line number sequences, and guard against empty lines
string.
In this commit:
commit 62f29fda90
Date: Tue Oct 9 22:21:05 2018 -0600
Highlight source code using GNU Source Highlight
A bug was introduced such that when displaying source code from a file
with lines `\r\n` GDB would print `^M` at the end of each line.
This caused a regression on the test gdb.fortran/nested-funcs.exp,
which happens to have `\r\n` line endings.
gdb/ChangeLog:
* source.c (print_source_lines_base): Fix skip of '\r' if next
character is '\n'.
Valgrind detects the below error in gdb.base/list.exp.
==14763== Invalid read of size 4
==14763== at 0x60B584: search_command_helper(char const*, int, bool) [clone .constprop.91] (source.c:1601)
==14763== by 0x408888: cmd_func(cmd_list_element*, char const*, int) (cli-decode.c:1892)
==14763== by 0x668550: execute_command(char const*, int) (top.c:630)
==14763== by 0x4B2F7B: command_handler(char const*) (event-top.c:583)
==14763== by 0x4B326C: command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) (event-top.c:772)
...
==14763== Address 0x6d9f09c is 4 bytes before a block of size 156 alloc'd
==14763== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836)
==14763== by 0x41904C: xrealloc (common-utils.c:62)
==14763== by 0x60A300: find_source_lines(symtab*, int) (source.c:1203)
==14763== by 0x608219: source_cache::get_plain_source_lines(symtab*, int, int, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*) (source-cache.c:51)
==14763== by 0x60A46B: print_source_lines_base(symtab*, int, int, enum_flags<print_source_lines_flag>) (source.c:1350)
==14763== by 0x404E2D: list_command(char const*, int) (cli-cmds.c:1080)
....
Add the missing condition to end the loop once line 1 has been
reversed-searched.
gdb/ChangeLog
2019-01-01 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* source.c (search_command_helper): Stop reverse search
when line 1 has been searched.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This changes gdb to highlight source using GNU Source Highlight, if it
is available.
This affects the output of the "list" command and also the TUI source
window.
No new test because I didn't see a way to make it work when Source
Highlight is not found.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (can_emit_style_escape): Declare.
* utils.c (can_emit_style_escape): No longer static.
* cli/cli-style.c (set_style_enabled): New function.
(_initialize_cli_style): Use it.
* tui/tui-winsource.c (tui_show_source_line): Use tui_puts.
(tui_alloc_source_buffer): Change how source lines are allocated.
* tui/tui-source.c (copy_source_line): New function.
(tui_set_source_content): Use source cache.
* tui/tui-io.h (tui_puts): Update.
* tui/tui-io.c (tui_puts_internal): Add window parameter.
(tui_puts): Likewise.
(tui_redisplay_readline): Update.
* tui/tui-data.c (free_content_elements): Change how source window
contents are freed.
* source.c (forget_cached_source_info): Clear the source cache.
(print_source_lines_base): Use the source cache.
* source-cache.h: New file.
* source-cache.c: New file.
* configure.ac: Check for GNU Source Highlight library.
* configure: Update.
* config.in: Update.
* Makefile.in (SRCHIGH_LIBS, SRCHIGH_CFLAGS): New variables.
(INTERNAL_CFLAGS_BASE): Add SRCHIGH_CFLAGS.
(CLIBS): Add SRCHIGH_LIBS.
(COMMON_SFILES): Add source-cache.c.
(HFILES_NO_SRCDIR): Add source-cache.h.
This adds some output styling to the CLI.
A style is currently a foreground color, a background color, and an
intensity (dim or bold). (This list could be expanded depending on
terminal capabilities.)
A style can be applied while printing. For ui-out, this is done by
passing the style constant as an argument. For low-level cases,
fprintf_styled and fputs_styled are provided.
Users can control the style via a number of new set/show commands. In
the interest of not typing many nearly-identical documentation
strings, I automated this. On the down side, this is not very
i18n-friendly.
I've chose some default colors to use. I think it would be good to
enable this by default, so that when users start the new gdb, they
will see the new feature.
Stylizing is done if TERM is set and is not "dumb". This could be
improved when the TUI is available by using the curses has_colors
call. That is, the lowest layer could call this without committing to
using curses everywhere; see my other patch for TUI colorizing.
I considered adding a new "set_style" method to ui_file. However,
because the implementation had to interact with the pager code, I
didn't take this approach. But, one idea might be to put the isatty
check there and then have it defer to the lower layers.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (set_output_style, fprintf_styled)
(fputs_styled): Declare.
* utils.c (applied_style, desired_style): New globals.
(emit_style_escape, set_output_style): New function.
(prompt_for_continue): Emit style escapes.
(fputs_maybe_filtered): Likewise.
(fputs_styled, fprintf_styled): New functions.
* ui-out.h (enum class ui_out_style_kind): New.
(class ui_out) <field_string, field_stream, do_field_string>: Add
style parameter.
* ui-out.c (ui_out::field_stream, ui_out::field_string): Add style
parameter.
* tui/tui-out.h (class tui_ui_out) <do_field_string>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_string): Add style
parameter.
(tui_ui_out::do_field_string): Update.
* tracepoint.c (print_one_static_tracepoint_marker): Style
output.
* stack.c (print_frame_info, print_frame): Style output.
* source.c (print_source_lines_base): Style output.
* skip.c (info_skip_command): Style output.
* record-btrace.c (btrace_call_history_src_line): Style output.
(btrace_call_history): Likewise.
* python/py-framefilter.c (py_print_frame): Style output.
* mi/mi-out.h (class mi_ui_out) <do_field_string>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_table_header)
(mi_ui_out::do_field_int): Update.
(mi_ui_out::do_field_string): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Style output.
* cli/cli-style.h: New file.
* cli/cli-style.c: New file.
* cli-out.h (class cli_ui_out) <do_field_string>: Add style
parameter.
* cli-out.c (cli_ui_out::do_table_header)
(cli_ui_out::do_field_int, cli_ui_out::do_field_skip): Update.
(cli_ui_out::do_field_string): Add style parameter. Style the
output.
* breakpoint.c (print_breakpoint_location): Style output.
(update_static_tracepoint): Likewise.
* Makefile.in (SUBDIR_CLI_SRCS): Add cli-style.c.
(HFILES_NO_SRCDIR): Add cli-style.h.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: New file.
* gdb.base/style.c: New file.
Back in:
commit 85ae1317ad
Author: Stan Shebs <shebs@codesourcery.com>
AuthorDate: Thu Dec 8 02:27:47 1994 +0000
* source.c: Various cosmetic changes.
(forward_search_command): Handle very long source lines correctly.
a buffer with a hard limit was converted to a heap buffer:
@@ -1228,15 +1284,26 @@ forward_search_command (regex, from_tty)
stream = fdopen (desc, FOPEN_RT);
clearerr (stream);
while (1) {
-/* FIXME!!! We walk right off the end of buf if we get a long line!!! */
- char buf[4096]; /* Should be reasonable??? */
- register char *p = buf;
+ static char *buf = NULL;
+ register char *p;
+ int cursize, newsize;
+
+ cursize = 256;
+ buf = xmalloc (cursize);
+ p = buf;
However, reverse_search_command has the exact same problem, and that
wasn't fixed. We still have that "we walk right off" comment...
Recently, the xmalloc above was replaced with a xrealloc, because as
can be seen above, that 'buf' variable above was a static local,
otherwise we'd be leaking. This commit replaces that and the
associated manual buffer growing with a gdb::def_vector<char>. I
don't think there's much point in reusing the buffer across command
invocations.
While doing this, I realized that reverse_search_command is almost
identical to forward_search_command. So this commit factors out a
common helper function instead of duplicating a lot of code.
There are some tests for "forward-search" in gdb.base/list.exp, but
since they use the "search" alias, they were a bit harder to find than
expected. That's now fixed, both by testing both variants, and by
adding some commentary. Also, there are no tests for the
"reverse-search" command, so this commit adds some for that too.
gdb/ChangeLog:
2018-12-08 Pedro Alves <palves@redhat.com>
* source.c (forward_search_command): Rename to ...
(search_command_helper): ... this. Add 'forward' parameter.
Tweak to use a gdb::def_vector<char> instead of a xrealloc'ed
buffer. Handle backward searches too.
(forward_search_command, reverse_search_command): Reimplement by
calling search_command_helper.
gdb/testsuite/ChangeLog:
2018-12-08 Pedro Alves <palves@redhat.com>
* gdb.base/list.exp (test_forward_search): Rename to ...
(test_forward_reverse_search): ... this. Also test reverse-search
and the forward-search alias.
Valgrind reports the below leak.
Fix the leak by using xrealloc, even for the first allocation,
as buf is static.
==29158== 5,888 bytes in 23 blocks are definitely lost in loss record 3,028 of 3,149
==29158== at 0x4C2BE2D: malloc (vg_replace_malloc.c:299)
==29158== by 0x41B557: xmalloc (common-utils.c:44)
==29158== by 0x60B7D9: forward_search_command(char const*, int) (source.c:1563)
==29158== by 0x40BA68: cmd_func(cmd_list_element*, char const*, int) (cli-decode.c:1888)
==29158== by 0x665300: execute_command(char const*, int) (top.c:630)
...
gdb/ChangeLog
2018-11-29 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* source.c (forward_search_command): Fix leak by using
xrealloc even for the first allocation in the loop, as buf
is static.
Leak fixed in '8e6a5953e1d Fix 4K leak in open_source_file' has been partially
undone by '2179fbc36d23 Return scoped_fd from open_source_file'. Re-add the
transfer of current s->fullname to the unique_xmalloc_ptr fullname given to
find_and_open_source.
The return value from get_filename_and_charpos is never used, so this
patch changes it to return void.
gdb/ChangeLog
2018-11-19 Tom Tromey <tom@tromey.com>
* source.c (get_filename_and_charpos): Return void.
When current function changes after a next/step, GDB shows a message such as:
(gdb) s
info_fun1 ()
at /bd/home/philippe/gdb/git/build_smallthing/gdb/testsuite/../../../smallthing/gdb/testsuite/gdb.base/info_qt.c:41
41 info_qt_inc++;
(gdb)
Valgrind reports a 4K definite leak for each such message (full stacktrace of
the leak below).
This patch fixes this leak, by transferring the current s->fullname to the
unique_xmalloc_ptr fullname given to find_and_open_source.
Note that I do not understand why find_and_open_source always tries to
re-execute the substitution rules on the provided fullname, as source.c
symtab_to_fullname just blindly returns a non NULL s->fullname, counting on
forget_cached_source_info to be called if search dir or substitution rules are
changed. Similarly, psymtab_to_fullname also just returns a non NULL
ps->fullname.
==15309== VALGRIND_GDB_ERROR_BEGIN
==15309== 69,632 bytes in 17 blocks are definitely lost in loss record 3,158 of 3,186
==15309== at 0x4C2BE2D: malloc (vg_replace_malloc.c:299)
==15309== by 0x5BF0987: realpath@@GLIBC_2.3 (canonicalize.c:78)
==15309== by 0x41F713: gdb_realpath(char const*) (pathstuff.c:72)
==15309== by 0x608833: openp(char const*, enum_flags<openp_flag>, char const*, int, std::unique_ptr<char, gdb::xfree_deleter<char> >*) (source.c:861)
==15309== by 0x608B89: find_and_open_source(char const*, char const*, std::unique_ptr<char, gdb::xfree_deleter<char> >*) (source.c:1049)
==15309== by 0x608D0B: open_source_file(symtab*) (source.c:1074)
==15309== by 0x609101: print_source_lines_base(symtab*, int, int, enum_flags<print_source_lines_flag>) (source.c:1291)
==15309== by 0x614ADF: print_frame_info(frame_info*, int, print_what, int, int) (stack.c:911)
==15309== by 0x614C45: print_stack_frame(frame_info*, int, print_what, int) (stack.c:181)
==15309== by 0x511D5E: print_stop_location (infrun.c:8044)
==15309== by 0x511D5E: print_stop_event(ui_out*) (infrun.c:8061)
==15309== by 0x40DD6D: cli_on_normal_stop(bpstats*, int) (cli-interp.c:145)
==15309== by 0x512409: operator() (functional:2127)
==15309== by 0x512409: notify (observable.h:106)
==15309== by 0x512409: normal_stop() (infrun.c:8334)
==15309== by 0x5156D8: fetch_inferior_event(void*) (infrun.c:3955)
==15309== by 0x4B3EEC: gdb_wait_for_event(int) (event-loop.c:859)
==15309== by 0x4B3FF6: gdb_do_one_event() [clone .part.4] (event-loop.c:322)
==15309== by 0x4B41B4: gdb_do_one_event (common-exceptions.h:219)
==15309== by 0x4B41B4: start_event_loop() (event-loop.c:371)
==15309== by 0x551217: captured_command_loop() (main.c:330)
==15309== by 0x55220C: captured_main (main.c:1177)
==15309== by 0x55220C: gdb_main(captured_main_args*) (main.c:1193)
==15309== by 0x29B4F7: main (gdb.c:32)
==15309==
==15309== VALGRIND_GDB_ERROR_END
gdb/ChangeLog
2018-11-04 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* source.c (open_source_file): Fix leak by transferring the
current s->fullname to the unique_xmalloc_ptr fullname given
to find_and_open_source.
This removes a cleanup from add_path, replacing it with a use of
gdb::unique_xmalloc_ptr. Note that this declaration had to be hoisted
somewhat, to avoid inteference from the "goto"s in this function.
gdb/ChangeLog
2018-09-13 Tom Tromey <tom@tromey.com>
* source.c (add_path): Use gdb::unique_xmalloc_ptr.
This removes two more uses of make_cleanup_close, replacing them with
relatively straightforward uses of scoped_fd.
Tested by the buildbot.
gdb/ChangeLog
2018-06-09 Tom Tromey <tom@tromey.com>
* source.c (reverse_search_command, forward_search_command): Use
scoped_fd.
This changes a few more places to use scoped_fd. This allows the
removal of some cleanups.
Regression tested by the buildbot, though note that I'm not sure
whether the buildbot actually builds anything using all of these
files.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* source.c (get_filename_and_charpos): Use scoped_fd.
* nto-procfs.c (procfs_open_1): Use scoped_fd.
(procfs_pidlist): Likewise.
* procfs.c (proc_get_LDT_entry): Use scoped_fd.
(iterate_over_mappings): Likewise.
This patch makes delim_string_to_char_ptr_vec and all related functions
use std::vector of gdb::unique_xmalloc_ptr. This allows getting rid of
make_cleanup_free_char_ptr_vec. Returning a vector of
unique_xmalloc_ptr instead of std::string allows to minimize the impacts
on the calling code. We can evaluate later whether we could/should
return a vector of std::strings instead.
gdb/ChangeLog:
* common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove.
(delim_string_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec_append): Take std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append):
Take std::vector of gdb::unique_xmalloc_ptr, adjust the code.
(delim_string_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec_append): Take an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
* auto-load.c (auto_load_safe_path_vec): Change type to
std::vector of gdb::unique_xmalloc_ptr.
(auto_load_expand_dir_vars): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(auto_load_safe_path_vec_update): Adjust.
(filename_is_in_auto_load_safe_path_vec): Adjust.
(auto_load_objfile_script_1): Adjust.
* build-id.c (build_id_to_debug_bfd): Adjust.
* linux-thread-db.c (thread_db_load_search): Adjust.
* source.c (add_path): Adjust.
(openp): Adjust.
* symfile.c (find_separate_debug_file): Adjust.
* utils.c (do_free_char_ptr_vec): Remove.
(make_cleanup_free_char_ptr_vec): Remove.
gdb/gdbserver/ChangeLog:
* server.c (parse_debug_format_options): Adjust to
delim_string_to_char_ptr_vec changes.
* thread-db.c (thread_db_load_search): Adjust to
dirnames_to_char_ptr_vec changes.
Simon mentioned on IRC that, after the startup-with-shell feature has
been implemented on gdbserver, it is not possible to specify a
filename-only binary, like:
$ gdbserver :1234 a.out
/bin/bash: line 0: exec: a.out: not found
During startup program exited with code 127.
Exiting
This happens on systems where the current directory "." is not listed
in the PATH environment variable. Although including "." in the PATH
variable is a possible workaround, this can be considered a regression
because before startup-with-shell it was possible to use only the
filename (due to reason that gdbserver used "exec*" directly).
The idea of the patch is to verify if the program path provided by the
user (or by the remote protocol) contains a directory separator
character. If it doesn't, it means we're dealing with a filename-only
binary, so we call "gdb_abspath" to properly expand it and transform
it into a full path. Otherwise, we leave the program path untouched.
This mimicks the behaviour seen on GDB (look at "openp" and
"attach_inferior", for example).
I am also submitting a testcase which exercises the scenario described
above. This test requires gdbserver to be executed in a different CWD
than the original, so I also created a helper function, "with_cwd" (on
testsuite/lib/gdb.exp), which takes care of cd'ing into and out of the
specified dir.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simon.marchi@polymtl.ca>
* common/common-utils.c: Include "sys/stat.h".
(is_regular_file): Move here from "source.c"; change return
type to "bool".
* common/common-utils.h (is_regular_file): New prototype.
* common/pathstuff.c (contains_dir_separator): New function.
* common/pathstuff.h (contains_dir_separator): New prototype.
* source.c: Don't include "sys/stat.h".
(is_regular_file): Move to "common/common-utils.c".
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include "filenames.h" and "pathstuff.h".
(program_name): Delete variable.
(program_path): New anonymous class.
(get_exec_wrapper): Use "program_path" instead of
"program_name".
(handle_v_run): Likewise.
(captured_main): Likewise.
(process_serial_event): Likewise.
gdb/testsuite/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/abspath.exp: New file.
* lib/gdb.exp (with_cwd): New procedure.
This commit moves the path manipulation routines found on utils.c to a
new common/pathstuff.c, and updates the Makefile.in's accordingly.
The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and
"gdb_abspath".
This will be needed because gdbserver will have to call "gdb_abspath"
on my next patch, which implements a way to expand the path of the
inferior provided by the user in order to allow specifying just the
binary name when starting gdbserver, like:
$ gdbserver :1234 a.out
With the recent addition of the startup-with-shell feature on
gdbserver, this scenario doesn't work anymore if the user doesn't have
the current directory listed in the PATH variable.
I had to do a minor adjustment on "gdb_abspath" because we don't have
access to "tilde_expand" on gdbserver, so now the function is using
"gdb_tilde_expand" instead. Otherwise, the code is the same.
Regression tested on the BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
(HFILES_NO_SRCDIR): Add "common/pathstuff.h".
* auto-load.c: Include "common/pathstuff.h".
* common/common-def.h (current_directory): Move here.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
function.
* common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
prototype.
* common/pathstuff.c: New file.
* common/pathstuff.h: New file.
* compile/compile.c: Include "common/pathstuff.h".
* defs.h (current_directory): Move to "common/common-defs.h".
* dwarf2read.c: Include "common/pathstuff.h".
* exec.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* linux-thread-db.c: Likewise.
* main.c: Likewise.
* nto-tdep.c: Likewise.
* objfiles.c: Likewise.
* source.c: Likewise.
* symtab.c: Likewise.
* utils.c: Include "common/pathstuff.h".
(gdb_realpath): Move to "common/pathstuff.c".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
* utils.h (gdb_realpath): Move to "common/pathstuff.h".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c".
(OBJS): Add "pathstuff.o".
* server.c (current_directory): New global variable.
(captured_main): Initialize "current_directory".
This changes openp, source_full_path_of, and find_and_open_source to
take a unique_xmalloc_ptr, rather than a char*, as an outgoing
argument type. This simplifies the API, ownership-wise, and allows
for the removal of some cleanups.
gdb/ChangeLog
2018-02-14 Tom Tromey <tom@tromey.com>
* symfile.c (symfile_bfd_open): Update.
* source.h (openp, source_full_path_of, find_and_open_source):
Change argument type to unique_xmalloc_ptr.
* source.c (openp): Take a unique_xmalloc_ptr.
(source_full_path_of, find_and_open_source): Likewise.
(open_source_file, symtab_to_fullname): Update.
* solist.h (struct target_so_ops) <find_and_open_solib>: Take a
unique_xmalloc_ptr.
* solib.c (solib_find_1): Use unique_xmalloc_ptr.
(exec_file_find): Update.
* psymtab.c (psymtab_to_fullname): Update.
* nto-tdep.h (nto_find_and_open_solib): Update.
* nto-tdep.c (nto_find_and_open_solib): Change temp_path to a
unique_xmalloc_ptr.
* exec.c (exec_file_attach): Update.
* dwarf2read.c (try_open_dwop_file): Use unique_xmalloc_ptr.
* cli/cli-cmds.c (find_and_open_script): Use unique_xmalloc_ptr.
gdb/ChangeLog:
* defs.h (enum openp_flags): New enum.
(OPF_TRY_CWD_FIRST, OPF_SEARCH_IN_PATH, OPF_RETURN_REALPATH):
Move to enum openp_flags.
(openp_flags): New enum flags.
(openp): Change parameter type to openp_flags.
* source.c (openp): Change parameter type to openp_flags.
* cli/cli-cmds.c (find_and_open_script): Use openp_flags.
* dwarf2read.c (try_open_dwop_file): Use openp_flags.
An earlier change made find_source_lines read:
end = &data[size];
However, since 'size' is the size of the vector, this seems fishy.
More obviously ok is to compute the end of the data directly:
end = data.data () + size;
2018-02-09 Tom Tromey <tom@tromey.com>
* source.c (find_source_lines): Don't reference past the end of
the vector.
This replaces an explicit malloc and a cleanup with a gdb::def_vector.
2018-02-08 Tom Tromey <tom@tromey.com>
* source.c (find_source_lines): Use gdb::def_vector.
Instead, make symtab_and_line initialize its members itself. Many
symtab_and_line declarations are moved to where the object is
initialized at the same time both for clarity and to avoid double
initialization. A few functions, like e.g., find_frame_sal are
adjusted to return the sal using normal function return instead of an
output parameter likewise to avoid having to default-construct a sal
and then immediately have the object overwritten.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ada-lang.c (is_known_support_routine): Move sal declaration to
where it is initialized.
* breakpoint.c (create_internal_breakpoint, init_catchpoint)
(parse_breakpoint_sals, decode_static_tracepoint_spec)
(clear_command, update_static_tracepoint): Remove init_sal
references. Move declarations closer to initializations.
* cli/cli-cmds.c (list_command): Move sal declarations closer to
initializations.
* elfread.c (elf_gnu_ifunc_resolver_stop): Remove init_sal
references. Move sal declarations closer to initializations.
* frame.c (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter. Remove init_sal references.
* frame.h (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter.
* guile/scm-frame.c (gdbscm_frame_sal): Adjust.
* guile/scm-symtab.c (stscm_make_sal_smob): Use in-place new
instead of memset.
(gdbscm_find_pc_line): Remove init_sal reference.
* infcall.c (call_function_by_hand_dummy): Remove init_sal
references. Move declarations closer to initializations.
* infcmd.c (set_step_frame): Update. Move declarations closer to
initializations.
(finish_backward): Remove init_sal references. Move declarations
closer to initializations.
* infrun.c (process_event_stop_test, handle_step_into_function)
(insert_hp_step_resume_breakpoint_at_frame)
(insert_step_resume_breakpoint_at_caller): Likewise.
* linespec.c (create_sals_line_offset, decode_digits_ordinary)
(symbol_to_sal): Likewise.
* probe.c (parse_probes_in_pspace): Remove init_sal reference.
* python/py-frame.c (frapy_find_sal): Move sal declaration closer
to its initialization.
* reverse.c (save_bookmark_command): Use new/delete. Remove
init_sal references. Move declarations closer to initializations.
* source.c (get_current_source_symtab_and_line): Remove brace
initialization.
(set_current_source_symtab_and_line): Now takes the sal by const
reference. Remove brace initialization.
(line_info): Remove init_sal reference.
* source.h (set_current_source_symtab_and_line): Now takes a
symtab_and_line via const reference.
* stack.c (set_current_sal_from_frame): Adjust.
(print_frame_info): Adjust.
(get_last_displayed_sal): Return the sal via function return
instead of via output parameter. Simplify.
(frame_info): Adjust.
* stack.h (get_last_displayed_sal): Return the sal via function
return instead of via output parameter.
* symtab.c (init_sal): Delete.
(find_pc_sect_line): Remove init_sal references. Move
declarations closer to initializations.
(find_function_start_sal): Remove init_sal references. Move
declarations closer to initializations.
* symtab.h (struct symtab_and_line): In-class initialize all
fields.
* tracepoint.c (set_traceframe_context)
(print_one_static_tracepoint_marker): Remove init_sal references.
Move declarations closer to initializations.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Adjust.
* tui/tui-stack.c (tui_show_frame_info): Adjust. Move
declarations closer to initializations.
* tui/tui-winsource.c (tui_update_source_window_as_is): Remove
init_sal references. Adjust.
This replaces "struct symtabs_and_lines" with
std::vector<symtab_and_line> in most cases. This removes a number of
cleanups.
In some cases, the sals objects do not own the sals they point at.
Instead they point at some sal that lives on the stack. Typically
something like this:
struct symtab_and_line sal;
struct symtabs_and_lines sals;
// fill in sal
sals.nelts = 1;
sals.sals = &sal;
// use sals
Instead of switching those cases to std::vector too, such usages are
replaced by gdb::array_view<symtab_and_line> instead. This avoids
introducing heap allocations.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Use range-for.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* breakpoint.c: Include "common/array-view.h".
(init_breakpoint_sal, create_breakpoint_sal): Change sals
parameter from struct symtabs_and_lines to
array_view<symtab_and_line>. Adjust. Use range-for. Update.
(breakpoint_sals_to_pc): Change sals parameter from struct
symtabs_and_lines to std::vector reference.
(check_fast_tracepoint_sals): Change sals parameter from struct
symtabs_and_lines to std::array_view. Use range-for.
(decode_static_tracepoint_spec): Return a std::vector instead of
symtabs_and_lines. Update.
(create_breakpoint): Update.
(break_range_command, until_break_command, clear_command): Update.
(base_breakpoint_decode_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location)
(bkpt_probe_decode_location, tracepoint_decode_location)
(tracepoint_probe_decode_location)
(strace_marker_create_sals_from_location): Return a std::vector
instead of symtabs_and_lines.
(strace_marker_create_breakpoints_sal): Update.
(strace_marker_decode_location): Return a std::vector instead of
symtabs_and_lines. Update.
(update_breakpoint_locations): Change struct symtabs_and_lines
parameters to gdb::array_view. Adjust.
(location_to_sals): Return a std::vector instead of
symtabs_and_lines. Update.
(breakpoint_re_set_default): Use std::vector instead of struct
symtabs_and_lines.
(decode_location_default): Return a std::vector instead of
symtabs_and_lines. Update.
* breakpoint.h: Include "common/array-view.h".
(struct breakpoint_ops) <decode_location>: Now returns a
std::vector instead of returning a symtabs_and_lines via output
parameter.
(update_breakpoint_locations): Change sals parameters to use
gdb::array_view.
* cli/cli-cmds.c (edit_command, list_command): Update to use
std::vector and gdb::array_view.
(ambiguous_line_spec): Adjust to use gdb::array_view and
range-for.
(compare_symtabs): Rename to ...
(cmp_symtabs): ... this. Change parameters to symtab_and_line
const reference and adjust.
(filter_sals): Rewrite using std::vector and standard algorithms.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify.
(jump_command): Update to use std::vector.
* linespec.c (struct linespec_state) <canonical_names>: Update
comment.
(add_sal_to_sals_basic): Delete.
(add_sal_to_sals, filter_results, convert_results_to_lsals)
(decode_line_2, create_sals_line_offset)
(convert_address_location_to_sals, convert_linespec_to_sals)
(convert_explicit_location_to_sals, parse_linespec)
(event_location_to_sals, decode_line_full, decode_line_1)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc)
(decode_digits_list_mode, decode_digits_ordinary, minsym_found)
(linespec_result::~linespec_result): Adjust to use std::vector
instead of symtabs_and_lines.
* linespec.h (linespec_sals::sals): Now a std::vector.
(struct linespec_result): Use std::vector, bool, and in-class
initialization.
(decode_line_1, decode_line_with_current_source)
(decode_line_with_last_displayed): Return std::vector.
* macrocmd.c (info_macros_command): Use std::vector.
* mi/mi-main.c (mi_cmd_trace_find): Use std::vector.
* probe.c (parse_probes_in_pspace, parse_probes): Adjust to use
std::vector.
* probe.h (parse_probes): Return a std::vector.
* python/python.c (gdbpy_decode_line): Use std::vector and
gdb::array_view.
* source.c (select_source_symtab, line_info): Use std::vector.
* stack.c (func_command): Use std::vector.
* symtab.h (struct symtabs_and_lines): Delete.
* tracepoint.c (tfind_line_command, scope_info): Use std::vector.
This changes rewrite_source_path to return a unique_xmalloc_ptr and
fixes up the callers. This allows removing some cleanups.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* source.h (rewrite_source_path): Return a unique_xmalloc_ptr.
* source.c (rewrite_source_path): Return a unique_xmalloc_ptr.
(find_and_open_source, symtab_to_fullname): Update.
* psymtab.c (psymtab_to_fullname): Update.
This changes gdb_realpath to return a unique_xmalloc_ptr and fixes up
the callers. This allows removing some cleanups. This change by
itself caused xfullpath.exp to fail; and attempting to fix that ran
into various problems (like .get() being optimized out); so this patch
also rewrites xfullpath.exp to be a C++ selftest instead.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* exec.c (exec_file_attach): Update.
* linux-thread-db.c (try_thread_db_load): Update.
* guile/scm-safe-call.c (gdbscm_safe_source_script): Update.
* utils.c (gdb_realpath): Change return type.
(gdb_realpath_keepfile): Update.
(gdb_realpath_check_trailer, gdb_realpath_tests): New functions.
(_initialize_utils): Register the new self test.
* source.c (openp): Update.
(find_and_open_source): Update.
* nto-tdep.c (nto_find_and_open_solib): Update.
* main.c (set_gdb_data_directory): Update.
(captured_main_1): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update
(dw2_map_symbol_filenames): Update.
* auto-load.c (auto_load_safe_path_vec_update): Update.
(filename_is_in_auto_load_safe_path_vec): Change type of
"filename_realp".
(auto_load_objfile_script): Update.
(file_is_auto_load_safe): Update. Use std::string.
* utils.h (gdb_realpath): Return a gdb::unique_xmalloc_ptr.
testsuite/ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* gdb.gdb/xfullpath.exp: Remove.
This changes gdb_abspath to return a unique_xmalloc_ptr, and fixes up
the callers. This allows the removal of a cleanup, and also puts
ownership rules into the API, where they belong.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* compile/compile.c (compile_file_command): Use
gdb::unique_xmalloc_ptr, std::string.
* utils.c (gdb_abspath): Change return type.
* source.c (openp): Update.
* objfiles.c (allocate_objfile): Update.
* main.c (set_gdb_data_directory): Update.
* utils.h (gdb_abspath): Return a gdb::unique_xmalloc_ptr.
This patch changes most sites calling tilde_expand to use
gdb::unique_xmalloc_ptr, rather than a cleanup. It also changes
scan_expression_with_cleanup to return a unique pointer, because the
patch was already touching code in that area.
Regression tested on the buildbot.
ChangeLog
2017-08-05 Tom Tromey <tom@tromey.com>
* compile/compile-object-load.c (compile_object_load): Use
gdb::unique_xmalloc_ptr.
* cli/cli-dump.c (scan_filename): Rename from
scan_filename_with_cleanup. Change return type.
(scan_expression): Rename from scan_expression_with_cleanup.
Change return type.
(dump_memory_to_file, dump_value_to_file, restore_command):
Use gdb::unique_xmalloc_ptr. Update.
* cli/cli-cmds.c (find_and_open_script): Use
gdb::unique_xmalloc_ptr.
* tracefile-tfile.c (tfile_open): Use gdb::unique_xmalloc_ptr.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols): Use gdb::unique_xmalloc_ptr.
* symfile.c (symfile_bfd_open, generic_load)
(add_symbol_file_command, remove_symbol_file_command): Use
gdb::unique_xmalloc_ptr.
* source.c (openp): Use gdb::unique_xmalloc_ptr.
* psymtab.c (maintenance_print_psymbols): Use
gdb::unique_xmalloc_ptr.
* corelow.c (core_open): Use gdb::unique_xmalloc_ptr.
* breakpoint.c (save_breakpoints): Use gdb::unique_xmalloc_ptr.
* solib.c (solib_map_sections): Use gdb::unique_xmalloc_ptr.
(reload_shared_libraries_1): Likewise.
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
Tom Tromey