Define a helper variable for IRIX/non-IRIX test selection and use it
with the PR 14798 test case.
gas/
* testsuite/gas/mips/mips.exp: Use a helper variable for
IRIX/non-IRIX test selection.
This reverts commit 04c662e2b6.
In my underlying suggestion I neglected the fact that in those
cases (,%eiz,1) is the only visible indication that 32-bit
addressing is in effect.
This reverts commit 19449d7c67, addressing
the issue that was run into back then: There was no relationship to i686-*
and/or cross builds on 64-bit hosts. The sole problem was the use of / as
as comment character in certain ELF targets. Instead of division, use a
comparison operation.
At the same time also revert the ELF related part of 99c2d522f7 ("x86:
Update assembler tests for non-ELF targets") by replacing the construct
that's problematic for non-ELF, and by adding the "#pass" patterns to
the expected output files to cover for the tail padding generated into
COFF output.
Ever since commit 4d7206a284 ("Rework MIPS macro relaxation, fix string
merging bug"), <https://sourceware.org/ml/binutils/2004-01/msg00248.html>,
`prev_reloc_op_frag' has only been set and never used. Remove it then.
gas/
* config/tc-mips.c (prev_reloc_op_frag): Remove variable.
(my_getSmallExpression): Adjust accordingly.
PR gas/4572
When / is a comment character, its use as binary "divide" operator needs
escaping by a backslash. Besides the scrubber needing to support this
(addressed in an earlier change), there are also a few provisions needed
in target specific operator handling.
As the spec calls for % and * to also be escaped because of being
"overloaded", also recognize these, despite the overloading there not
really preventing their use as operators in most (%) or all (*) cases,
given the way how the rest of the assembler works.
To bring source and testsuite in line, also drop the TE_I386AIX part of
the respective conditional, as i?86-*-aix* support had been removed a
while ago.
PR gas/4572
Generalize what ab1fadc6b2 ("PR22714, Assembler preprocessor loses
track of \@") did to always honor escaped comment chars. Use this then
to support escaped /, %, and * operators on x86, when / is a comment
char (to match the Sun assembler's behavior).
Various provisions exist for insns to be placed in the absolute section,
yet actually trying to do so didn't work. While data emission (of non-
zero values) is not allowed by generic code, I think this functionality
is useful for the programmer to be able to determine the size of insns.
Therefore, rather than turning the silnet failure into a verbose one,
make things mostly work; the one class of insns not supported (yet) are
branches (JMP and Jcc) with dynamically determined displacement widths.
In this one case, an error now gets reported instead of silently
ignoring the code.
Also avoid recording ISA / feature usage for insns emitted to the
absolute section.
Change
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef(,%eiz,1),%rbx
to
67 48 8b 1c 25 ef cd ab 89 mov 0x89abcdef,%rbx
in AT&T syntax and
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR [eiz*1+0x89abcdef]
to
67 48 8b 1c 25 ef cd ab 89 mov rbx,QWORD PTR ds:0x89abcdef
in Intel syntax.
gas/
PR gas/26237
* testsuite/gas/i386/evex-no-scale-64.d: Updated.
* testsuite/gas/i386/addr32.d: Likewise.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Don't display eiz with no scale
without base nor index registers.
* write.c (create_note_reloc): Add desc2_size parameter. Zero out
the addend field of REL relocations. Store the full addend into
the note for REL relocations.
The value chosen for the 16-/32-bit immediate cases didn't work well
with the subsequent insn's REX prefix - we ought to pick a value the
upper two bytes of which evaluate to a 2-byte insn. Bump the values
accordingly, allowing the subsequent insn to actually have the intended
REX.W.
"Unambiguous" is is in particular taking as reference the assembler,
which also accepts certain insns - despite them allowing for varying
operand size, and hence in principle being ambiguous - without any
suffix. For example, from the very beginning of the life of x86-64 I had
trouble understanding why a plain and simple RET had to be printed as
RETQ. In case someone really used the 16-bit form, RETW disambiguates
the two quite fine.
Since the addr32 (0x67) prefix zero-extends the lower 32 bits address to
64 bits, change disassembler to zero-extend the lower 32 bits displacement
to 64 bits when there is no base nor index registers.
gas/
PR gas/26237
* testsuite/gas/i386/addr32.s: Add tests for 32-bit wrapped around
address.
* testsuite/gas/i386/x86-64-addr32.s: Likewise.
* testsuite/gas/i386/addr32.d: Updated.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
opcodes/
PR gas/26237
* i386-dis.c (OP_E_memory): Without base nor index registers,
32-bit displacement to 64 bits.
%db<n> is an AT&T invention; the Intel documentation and MASM have only
ever specified DRn (in line with CRn and TRn). (In principle gas also
shouldn't accept the names in Intel mode, but at least for now I've kept
things as they are. Perhaps as a first step this should just be warned
about.)
The only valid (embedded or explicit) prefix being the data size one
(which is a fairly common pattern), avoid going through prefix_table[].
Instead extend the "required prefix" logic to also handle PREFIX_DATA
alone in a table entry, now used to identify this case. This requires
moving the (adjusted) ->prefix_requirement logic ahead of the printing
of stray prefixes, as the latter needs to observe the new setting of
PREFIX_DATA in used_prefixes.
Also add PREFIX_OPCODE on related entries when previously there was
mistakenly no decode step through prefix_table[].
The operands don't allow disambiguating the insn in 64-bit mode, and
hence suffixes need to be emitted not just in AT&T mode. Achieve this
by re-using %LQ while dropping PCMPESTR_Fixup().
MOVBE_Fixup() is entirely redundant with the S macro already used on the
mnemonics, leading to double suffixes in suffix-always mode. Drop the
function.
Just like other insns with GPR operands, CRC32 with only register
operands should not get a suffix added unless in suffix-always mode.
Do away with CRC32_Fixup() altogether, using other more generic logic
instead.
Unlike for non-zero values passed to USED_REX(), where rex_used gets
updated only when the respective bit was actually set in the encoding,
zero getting passed in is not further guarded, yet such a (potentially
"empty") REX prefix takes effect only when there are registers numbered
4 and up.
There's only a very limited set of modes that this function gets invoked
with - avoid it being more generic than it needs to be. This may, down
the road, allow actually doing away with the function altogether.
This eliminates a first improperly used "USED_REX (0)".
Various of the test expectations get adjusted later in this and a
subsequent series, so in order to avoid having to adjust more instances
than necessary fold respective test ILP32 expectations with their main
64-bit counterparts where they're identical anyway.
When encoding a 32-bit offset, there is no need to sign-extend it to 64
bits since only the lower 32 bits are used.
* config/tc-i386.c (offset_in_range): Remove 32-bit sign
extension.
git commit af2b318648 introduced a number of XPASSes. This removes
them. (It also introduces a FAIL on ft32-elf but the comment in the
.d file didn't adequately explain why the failure should be expected.)
* testsuite/gas/elf/dwarf2-7.d: Remove most xfails.
* testsuite/gas/elf/dwarf2-12.d: Likewise.
* testsuite/gas/elf/dwarf2-13.d: Likewise.
* testsuite/gas/elf/dwarf2-14.d: Likewise.
Extract extended states from operand types in instruction template. Set
xstate_zmm for master register move.
* config/tc-i386.c (_i386_insn): Remove has_regmmx, has_regxmm,
has_regymm, has_regzmm and has_regtmm. Add xstate.
(md_assemble): Set i.xstate from operand types in instruction
template.
(build_modrm_byte): Updated.
(output_insn): Check i.xstate.
* testsuite/gas/i386/i386.exp: Run property-6 and
x86-64-property-6.
* testsuite/gas/i386/property-6.d: New file.
* testsuite/gas/i386/property-6.s: Updated.
* testsuite/gas/i386/x86-64-property-6.d: Likewise.
Since VEX/EVEX vector instructions will always update the full YMM/ZMM
registers, set YMM/ZMM features for VEX/EVEX vector instructions.
* config/tc-i386.c (output_insn): Set YMM/ZMM features for
VEX/EVEX vector instructions.
* testsuite/gas/i386/property-4.d: New file.
* testsuite/gas/i386/property-4.s: Likewise.
* testsuite/gas/i386/property-5.d: Likewise.
* testsuite/gas/i386/property-5.s: Likewise.
* testsuite/gas/i386/x86-64-property-4.d: Likewise.
* testsuite/gas/i386/x86-64-property-5.d: Likewise.
Just like other VEX-encoded scalar insns do.
Besides a testcase for this behavior also introduce one to verify that
XOP scalar insns don't honor -mavxscalar=256, as they don't ignore
XOP.L.
Just like their AVX counterparts do for VEX.L.
At this occasion also make EVEX.W have the same effect as VEX.W on the
printing of VPINSR{B,W}'s operands, bringing them also in sync with
VPEXTR{B,W}.
There's only a single user, that that one can do fine with the
alternative, as the "Vex" aspect of the other operand kind is meaningful
only on 3-operand insns.
While doing this I noticed that I didn't need to do the same adjustment
in the EVEX tables, and voilà - there was a bug, which gets fixed at the
same time (see the testsuite changes).
We check register-only source operand to decide if two source operands of
VEX encoded instructions should be swapped. But source operands in AMX
instructions with two source operands swapped are all register-only
operand. Add SwapSources to indicate two source operands should be
swapped.
gas/
* config/tc-i386.c (build_modrm_byte): Check vexswapsources to
swap two source operands.
opcodes/
* i386-gen.c (opcode_modifiers): Add VexSwapSources.
* i386-opc.h (VexSwapSources): New.
(i386_opcode_modifier): Add vexswapsources.
* i386-opc.tbl: Add VexSwapSources to BMI2 and BMI instructions
with two source operands swapped.
* i386-tbl.h: Regenerated.
