For the ports that still don't build with -Werror, rather than disable
the flag at configure time, do it at make time. This will allow us to
unify these tests in the common sim configure script.
The sim-basics.h is too big and includes too many things. This leads
to some arch's sim-main.h having circular loop issues with defs, and
makes it hard to separate out common objects from arch-specific defs.
By splitting up sim-basics.h and killing off sim-main.h, it'll make
it easier to separate out the two.
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
The compiler doesn't like passing non-constant strings to printf
functions, so tweak the code to always pass one in. This code is
a little more verbose, but it's probably the same performance.
The macro usage is a bit ugly, but maybe less than copying &
pasting the extended conditional format logic.
This model uses unsigned char buffers, but this temporary pointer is
declared as signed. Switch it to unsigned since it's just a temporary
variable to hold the new pointer.
All of the settings in here are handled by the common top-level
config.h, so drop the individual arch-config.h files entirely.
This will also help guarantee that we don't add any new arch
specific defines that would affect common code which will help
with the effort of unifying them.
Currently, the sim-config module will abort if alignment settings
haven't been specified by the port's configure.ac. This is a bit
weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's
optional to use. Thus everyone invokes it.
There are 4 alignment settings, but really only 2 matters: strict
and nonstrict. The "mixed" setting is just the default ("unset"),
and "forced" isn't used directly by anyone (it's available as a
runtime option for some ports).
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, then the
build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't
called). If default settings are provided, then that is used, but
we allow the user to override at runtime. Otherwise, the "wire"
settings are used and user runtime options to change are ignored.
Most ports specify a default, or set the "wire" to nonstrict. A
few set "wire" to strict, but it's not clear that's necessary as
it doesn't make the code behavior, by default, any different. It
might make things a little faster, but we should provide the user
the choice of the compromises to make: force a specific mode at
compile time for faster runtime, or allow the choice at runtime.
More likely it seems like an oversight when these ports were
initially created, and/or copied & pasted from existing ports.
With all that backstory, let's get to what this commit does.
First kill off the idea of a compile-time default alignment and
set it to nonstrict in the common code. For any ports that want
strict alignment by default, that code is moved to sim_open while
initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be
completely removed.
Moving the default alignment to the runtime also allows removal
of setting the "wire" settings at configure time. Which allows
removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving
that call to common code.
The macro logic can be reworked to not pass WITH_ALIGNMENT as -D
CPPFLAG and instead move it to config.h.
All of these taken together mean we can hoist the macro up to the
top level and share it among all sims so behavior is consistent
among all the ports.
Move these options up to the common dir so we only test & export
them once across all ports. The AC_INIT macro does a lot of the
heavy lifting already which allows further simplification.
Move these options up to the common dir so we only test & export
them once across all ports.
The ppc code needs a little extra care with its trace settings as
it's not exactly the same API as the common code. The other knobs
are the same though.
Move the various platform tests up a level to avoid duplication
across the ports. When building multiple versions, this speeds
things up a bit.
For now we move the obvious stuff up a level, but we don't turn
own the config.h entirely just yet -- we still have some tests
related to libraries that need consideration.
Separate the name of the igen program from the options used to run it.
This allows us to avoid duplicating ../igen/igen in Makefiles and reuse
the existing setting in the common Makefile. This also allows us to
easily harmonize the use of EXEEXT between igen/local.mk and the common
makefiles when cross-compiling for e.g. Windows.
32-bit MIPS programs run on the 64-bit simulator model in 64-bit
sign-extended space. The mapping from 64-bit sign-extended addresses to
32-bit addresses was removed by commit
26f8bf63bf, breaking the 64-bit simulator
model. Add shadow mappings from 64-bit sign extended address space to
32-bit address spaces, in lieu of the AddressTranslation function.
2021-05-04 Faraz Shahbazker <fshahbazker@wavecomp.com>
sim/mips/ChangeLog:
* interp.c (sim_open): Add shadow mappings from 32-bit
address space to 64-bit sign-extended address space.
64-bit BFD for MIPS applies a standard sign extension on all addresses
assuming 64-bit target. These bits are required for 64-bit and can only
be safely truncated for 32-bit target models. This partially reverts commit
b36d953bce
The sign-extension logic modeled by BFD is an integral part of the
MIPS64 architecture spec. It appears in the virtual address map, where
sign extension allows for 32-bit compatibility segments [1] with 64-bit
addressing. Truncating these addresses prematurely (commit
models (-DWITH_TARGET_WORD_BITSIZE=64).
In the ISA itself, direct addressing (Load-Upper-Immediate) and indirect
addressing (Load-Word) both automatically sign-extend their results. These
instructions regenerate the sign-extended addresses even if we don't start
with one (see pr gdb/19447).
Moreover, some instructions like ADD*/SUB* have unpredictable behaviour when
an operand is not correctly sign extended [3]. This affects PC-relative
addressing in particular, so arithmetic on the link-address generated in the
return address register by a jump-and-link is no longer possible, neither is
the use of the PC-relative addressing instructions provided by MIPSR6.
[1] "MIPS64 Architecture for Programmers Volume III: The MIPS64
Privileged Resource Architecture", Document Number: MD00091,
Revision 6.02, December 10, 2015, Section 4.3 "Virtual Address
Spaces", pp. 29-31
https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00091-2B-MIPS64PRA-AFP-06.03.pdf
[2] "MIPS64 Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Reference Manual", Document Number: MD00087,
Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical
List of Instructions", pp. 321
https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00087-2B-MIPS64BIS-AFP-6.06.pdf
[3] "MIPS64 Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Reference Manual", Document Number: MD00087,
Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical
List of Instructions", pp. 56
https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00087-2B-MIPS64BIS-AFP-6.06.pdf
2021-04-23 Faraz Shahbazker <fshahbazker@wavecomp.com>
sim/mips/ChangeLog:
* interp.c (sim_create_inferior): Only truncate sign extension
bits for 32-bit target models
.
The defs.h header will take care of including the various config.h
headers. For now, it's just config.h, but we'll add more when we
integrate gnulib in.
This header should be used instead of config.h, and should be the
first include in every .c file. We won't rely on the old behavior
where we expected files to include the port's sim-main.h which then
includes the common sim-basics.h which then includes config.h. We
have a ton of code that includes things before sim-main.h, and it
sometimes needs to be that way. Creating a dedicated header avoids
the ordering mess and implicit inclusion that shows up otherwise.
The gdb/callback.h & gdb/remote-sim.h headers have nothing to do with
gdb and are really definitions for the libsim API under the sim/ tree.
While gdb uses those headers as a client, it's not specific to it. So
create a new sim/ namespace and move the headers there.
There's no need to restrict these to only specific targets as the user
can select them at runtime if they want them. Always build them so we
can improve build coverage too.
This is needed when building for a target whose ar & ranlib are
incompatible with the current build system. For example, building
for Windows on a Linux system.
Then manually import the automake rule for libigen.a, but tweak the
tool variables to use the FOR_BUILD variants.
While libiberty provides a definition for this for systems that lack
the function (e.g. Windows), it doesn't provide a prototype. So add
our own local copy in the one file that uses the func.
Every port using this sets the 1st arg to yes and the 2nd arg to "".
These are the defaults we probably want anyways in order to unify the
codebase, so move them to the macro and only allow ports to declare
extra hardware models.
When building with clang, we get:
error: unknown warning option '-Wmissing-parameter-type' [-Werror,-Wunknown-warning-option]
This is because clang only warns by default when encountering an unknown
warning option, and the probe for supported warning flags is done
without -Werror. All flags are therefore accepted by configure, but
then it breaks when actually compiling a source file with -Werror.
This is equivalent to this commit in gdb:
3e019bdc20
gdb: Use -Werror when checking for (un)supported warning flags
We then see some other compilation errors when building with clang and
-Werror, they can be dealt with later.
This avoids duplicate tests for functions between common m4, arches,
and any other sources that would trigger func tests.
Also manually delete known duplicate function tests between the m4,
bfin, and v850 ports.
The igen/dgen and opc2c tools leak their heap-allocated memory (on
purpose) at program exit, which makes AddressSanitizer fail the tool
execution. This breaks the build, as it makes the tool return a
non-zero exit code.
Fix that by disabling leak detection through the setting of that
environment variable.
I also changed the opc2c rules for m32c to go through a temporary file.
What happened is that the failing opc2c would produce an incomplete file
(probably because ASan exits the process before stdout is flushed).
This meant that further make attempts didn't try to re-create the file,
as it already existed. A "clean" was therefore necessary. This can
also happen in regular builds if the user interrupts the build (^C) in
the middle of the opc2c execution and tries to resume it. Going to a
temporary file avoids this issue.
sim/m32c/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running opc2c.
sim/mips/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/mn10300/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/ppc/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/v850/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
Change-Id: I00f21d4dc1aff0ef73471925d41ce7c23e83e082
sim/mips/ChangeLog
* interp.c (sim_monitor): Add switch entries for unlink (13),
lseek (14), and stat (15).
Derived from patch authored by Steve Ellcey <sellcey@mips.com>
This simplifies the build a bit (especially for deps in port subdirs),
and avoids recursive make. This in turn speeds up the build, and sets
us up for multi-target.
Rather than require $AR be set and then default to `ar`, use the
standard AC_CHECK_TOOL helper to find a good prefixed tool. In
practice this shouldn't change much as we seem to have macros in
the tree that were already setting it up, but we shouldn't rely
on that implicitly.
All the scripts were using this implicitly already, so there's no real
change for them, but we want to call it explicitly as the CPP tool is
used to generate nltvals.def.
We don't need a variable to add a dependency to the "all" target, and
having one doesn't really add value. Switch to the target directly for
the few ports that actually use this.
