plt_branch stubs are similar to plt_call stubs in that they branch
via bctr. Align them too.
bfd/
* elf64-ppc.c (ppc_size_one_stub): Align plt_branch stubs as for
plt_call stubs.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Adjust for plt_branch changes.
* testsuite/ld-powerpc/notoc.d: Likewise.
* testsuite/ld-powerpc/notoc.wf: Likewise.
* testsuite/ld-powerpc/notoc3.d: Likewise.
* testsuite/ld-powerpc/pr23937.d: Likewise.
The extended instructions implemented in powerpc_macros aren't used by
the disassembler. That means instructions like "sldi r3,r3,2" appear
in disassembly as "rldicr r3,r3,2,61", which is annoying since many
other extended instructions are shown.
Note that some of the instructions moved out of the macro table to the
opcode table won't appear in disassembly, because they are aliases
rather than a subset of the underlying raw instruction. If enabled,
rotrdi, extrdi, extldi, clrlsldi, and insrdi would replace all
occurrences of rotldi, rldicl, rldicr, rldic and rldimi. (Or many
occurrences in the case of clrlsldi if n <= b was added to the extract
functions.)
The patch also fixes a small bug in opcode sanity checking.
include/
* opcode/ppc.h (PPC_OPSHIFT_SH6): Define.
opcodes/
* ppc-opc.c (insert_erdn, extract_erdn, insert_eldn, extract_eldn),
(insert_crdn, extract_crdn, insert_rrdn, extract_rrdn),
(insert_sldn, extract_sldn, insert_srdn, extract_srdn),
(insert_erdb, extract_erdb, insert_csldn, extract_csldb),
(insert_irdb, extract_irdn): New functions.
(ELDn, ERDn, ERDn, RRDn, SRDn, ERDb, CSLDn, CSLDb, IRDn, IRDb):
Define and add associated powerpc_operands entries.
(powerpc_opcodes): Add "rotrdi", "srdi", "extrdi", "clrrdi",
"sldi", "extldi", "clrlsldi", "insrdi" and corresponding record
(ie. dot suffix) forms.
(powerpc_macros): Delete same from here.
gas/
* config/tc-ppc.c (insn_validate): Don't modify value passed
to operand->insert for PPC_OPERAND_PLUS1 when calculating mask.
Handle PPC_OPSHIFT_SH6.
* testsuite/gas/ppc/prefix-reloc.d: Update.
* testsuite/gas/ppc/simpshft.d: Update.
ld/
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/notoc.d: Update.
* testsuite/ld-powerpc/notoc3.d: Update.
* testsuite/ld-powerpc/tlsdesc2.d: Update.
* testsuite/ld-powerpc/tlsget.d: Update.
* testsuite/ld-powerpc/tlsget2.d: Update.
* testsuite/ld-powerpc/tlsopt5.d: Update.
* testsuite/ld-powerpc/tlsopt6.d: Update.
This patch better supports mixing of power10 and non-power10 code,
as might be seen in a cpu-optimized library using ifuncs to select
functions optimized for a given cpu. Using -Wl,--no-power10-stubs
isn't that good in this situation since non-power10 notoc stubs are
slower and larger than the power10 variants, which you'd like to use
on power10 code paths.
With this change, power10 pc-relative code that makes calls marked
@notoc uses power10 stubs if stubs are necessary, and other calls use
non-power10 instructions in stubs. This will mean that if gcc is
generating code for -mcpu=power10 but with pc-rel disabled then you'll
get the older stubs even on power10 (unless you force with
-Wl,--power10-stubs). That shouldn't be too big a problem: stubs that
use r2 are reasonable. It's just the ones that set up addressing
using "mflr 12; bcl 20,31,.+4; mflr 11; mtlr 12" that should be
avoided if possible.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add has_power10_relocs.
(select_alt_stub): New function.
(ppc_get_stub_entry): Use it here.
(ppc64_elf_check_relocs): Set had_power10_relocs rather than
power10_stubs.
(ppc64_elf_size_stubs): Clear power10_stubs here instead. Don't
merge notoc stubs with other varieties when power10_stubs is "auto".
Instead dup the stub hash table entry.
(plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust
tests of power10_stubs.
ld/
* emultempl/ppc64elf.em (power10-stubs): Accept optional "auto" arg.
* ld.texi (power10-stubs): Update.
* testsuite/ld-powerpc/callstub-1.d: Force --power10-stubs.
* testsuite/ld-powerpc/callstub-2.d: Relax branch offset comparison.
* testsuite/ld-powerpc/callstub-4.d: New test.
* testsuite/ld-powerpc/notoc.d: Force --no-power10-stubs.
* testsuite/ld-powerpc/notoc3.d,
* testsuite/ld-powerpc/notoc3.s,
* testsuite/ld-powerpc/notoc3.wf: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new tests. Pass
--no-power10-stubs for notoc link.
This patch generates EH info for the new _notoc linkage stubs, to
support unwinding from asynchronous signal handlers. Unwinding
through the __tls_get_addr_opt stub was already supported, but that
was just a single stub. With multiple stubs the EH opcodes need to be
emitted and sized when iterating over stubs, so this is done when
emitting and sizing the stub code. Emitting the CIEs and FDEs is done
when sizing the stubs, as we did before in order to have the linker
generated FDEs indexed in .eh_frame_hdr. I moved the final tweaks to
FDEs from ppc64_elf_finish_dynamic_sections to ppc64_elf_build_stubs
simply because it's tidier to be done with them at that point.
bfd/
* elf64-ppc.c (struct map_stub): Delete tls_get_addr_opt_bctrl.
Add lr_restore, eh_size and eh_base.
(eh_advance, eh_advance_size): New functions.
(build_tls_get_addr_stub): Emit EH info for stub.
(ppc_build_one_stub): Likewise for _notoc stubs.
(ppc_size_one_stub): Size EH info for stub.
(group_sections): Init new map_stub fields.
(stub_eh_frame_size): Delete.
(ppc64_elf_size_stubs): Size EH info for stubs. Set up dummy EH
program for stubs.
(ppc64_elf_build_stubs): Reinit new map_stub fields. Set FDE
offset to stub section here..
(ppc64_elf_finish_dynamic_sections): ..rather than here.
ld/
* testsuite/ld-powerpc/notoc.s: Generate some cfi.
* testsuite/ld-powerpc/notoc.d: Adjust.
* testsuite/ld-powerpc/notoc.wf: New file.
* testsuite/ld-powerpc/powerpc.exp: Run "ext" and "notoc" tests
as run_ld_link_tests rather than run_dump_test.
R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the
linker that linkage stubs for PLT calls or long branches can't use r2
for pic addressing. Instead, new stubs that generate pc-relative
addresses are used. One complication is that pc-relative offsets to
the PLT may need to be 64-bit in large programs, in contrast to the
toc-relative addressing used by older PLT linkage stubs where a 32-bit
offset is sufficient until the PLT itself exceeds 2G in size.
.eh_frame info to cover the _notoc stubs is yet to be implemented.
bfd/
* elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12),
(ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0),
(SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define.
(ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC.
(ppc_stub_type): Add ppc_stub_long_branch_notoc,
ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc,
ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and
ppc_stub_plt_call_both.
(is_branch_reloc): Add R_PPC64_REL24_NOTOC.
(build_offset, size_offset): New functions.
(plt_stub_size): Support plt_call_notoc and plt_call_both.
(ppc_build_one_stub, ppc_size_one_stub): Support new stubs.
(toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC.
(ppc64_elf_size_stubs): Likewise, and new stubs.
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise.
* reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @notoc.
(ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC.
ld/
* testsuite/ld-powerpc/ext.d,
* testsuite/ld-powerpc/ext.s,
* testsuite/ld-powerpc/ext.lnk,
* testsuite/ld-powerpc/notoc.d,
* testsuite/ld-powerpc/notoc.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
