
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
616 lines
19 KiB
Text
616 lines
19 KiB
Text
# configure.ac -- Backtrace configure script.
|
|
# Copyright (C) 2012-2023 Free Software Foundation, Inc.
|
|
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions are
|
|
# met:
|
|
|
|
# (1) Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
|
|
# (2) Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
|
|
# (3) The name of the author may not be used to
|
|
# endorse or promote products derived from this software without
|
|
# specific prior written permission.
|
|
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
AC_INIT(package-unused, version-unused,, libbacktrace)
|
|
AC_CONFIG_SRCDIR(backtrace.h)
|
|
AC_CONFIG_HEADER(config.h)
|
|
|
|
if test -n "${with_target_subdir}"; then
|
|
AM_ENABLE_MULTILIB(, ..)
|
|
fi
|
|
|
|
AC_CANONICAL_SYSTEM
|
|
target_alias=${target_alias-$host_alias}
|
|
|
|
AC_USE_SYSTEM_EXTENSIONS
|
|
|
|
libtool_VERSION=1:0:0
|
|
AC_SUBST(libtool_VERSION)
|
|
|
|
# 1.11.1: Require that version of automake.
|
|
# foreign: Don't require README, INSTALL, NEWS, etc.
|
|
# no-define: Don't define PACKAGE and VERSION.
|
|
# no-dependencies: Don't generate automatic dependencies.
|
|
# (because it breaks when using bootstrap-lean, since some of the
|
|
# headers are gone at "make install" time).
|
|
# -Wall: Issue all automake warnings.
|
|
# -Wno-portability: Don't warn about constructs supported by GNU make.
|
|
# (because GCC requires GNU make anyhow).
|
|
AM_INIT_AUTOMAKE([1.11.1 foreign no-dist no-define no-dependencies -Wall -Wno-portability])
|
|
|
|
AM_MAINTAINER_MODE
|
|
|
|
AC_ARG_WITH(target-subdir,
|
|
[ --with-target-subdir=SUBDIR Configuring in a subdirectory for target])
|
|
|
|
# We must force CC to /not/ be precious variables; otherwise
|
|
# the wrong, non-multilib-adjusted value will be used in multilibs.
|
|
# As a side effect, we have to subst CFLAGS ourselves.
|
|
m4_rename([_AC_ARG_VAR_PRECIOUS],[backtrace_PRECIOUS])
|
|
m4_define([_AC_ARG_VAR_PRECIOUS],[])
|
|
AC_PROG_CC
|
|
m4_rename_force([backtrace_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
|
|
|
|
AC_SUBST(CFLAGS)
|
|
|
|
AC_PROG_RANLIB
|
|
|
|
AC_PROG_AWK
|
|
case "$AWK" in
|
|
"") AC_MSG_ERROR([can't build without awk]) ;;
|
|
esac
|
|
|
|
AC_CHECK_PROG(DWZ, dwz, dwz)
|
|
AM_CONDITIONAL(HAVE_DWZ, test "$DWZ" != "")
|
|
|
|
LT_INIT
|
|
AM_PROG_LIBTOOL
|
|
|
|
AM_CONDITIONAL([ENABLE_DARWIN_AT_RPATH], [test x$enable_darwin_at_rpath = xyes])
|
|
|
|
AC_SYS_LARGEFILE
|
|
|
|
backtrace_supported=yes
|
|
|
|
if test -n "${with_target_subdir}"; then
|
|
# We are compiling a GCC library. We can assume that the unwind
|
|
# library exists.
|
|
BACKTRACE_FILE="backtrace.lo simple.lo"
|
|
else
|
|
AC_CHECK_HEADER([unwind.h],
|
|
[AC_CHECK_FUNC([_Unwind_Backtrace],
|
|
[BACKTRACE_FILE="backtrace.lo simple.lo"],
|
|
[BACKTRACE_FILE="nounwind.lo"
|
|
backtrace_supported=no])],
|
|
[BACKTRACE_FILE="nounwind.lo"
|
|
backtrace_supported=no])
|
|
fi
|
|
AC_SUBST(BACKTRACE_FILE)
|
|
|
|
EXTRA_FLAGS=
|
|
if test -n "${with_target_subdir}"; then
|
|
EXTRA_FLAGS="-funwind-tables -frandom-seed=\$@"
|
|
else
|
|
AC_CACHE_CHECK([for -funwind-tables option],
|
|
[libbacktrace_cv_c_unwind_tables],
|
|
[CFLAGS_hold="$CFLAGS"
|
|
CFLAGS="$CFLAGS -funwind-tables"
|
|
AC_COMPILE_IFELSE(
|
|
[AC_LANG_PROGRAM([static int f() { return 0; }], [return f();])],
|
|
[libbacktrace_cv_c_unwind_tables=yes],
|
|
[libbacktrace_cv_c_unwind_tables=no])
|
|
CFLAGS="$CFLAGS_hold"])
|
|
if test "$libbacktrace_cv_c_unwind_tables" = "yes"; then
|
|
EXTRA_FLAGS=-funwind-tables
|
|
fi
|
|
AC_CACHE_CHECK([for -frandom-seed=string option],
|
|
[libbacktrace_cv_c_random_seed_string],
|
|
[CFLAGS_hold="$CFLAGS"
|
|
CFLAGS="$CFLAGS -frandom-seed=conftest.lo"
|
|
AC_COMPILE_IFELSE(
|
|
[AC_LANG_PROGRAM([], [return 0;])],
|
|
[libbacktrace_cv_c_random_seed_string=yes],
|
|
[libbacktrace_cv_c_random_seed_string=no])
|
|
CFLAGS="$CFLAGS_hold"])
|
|
if test "$libbacktrace_cv_c_random_seed_string" = "yes"; then
|
|
EXTRA_FLAGS="$EXTRA_FLAGS -frandom-seed=\$@"
|
|
fi
|
|
fi
|
|
|
|
if test -n "${with_target_subdir}"; then
|
|
# Add CET specific flags is Intel CET is enabled.
|
|
GCC_CET_FLAGS(CET_FLAGS)
|
|
EXTRA_FLAGS="$EXTRA_FLAGS $CET_FLAGS"
|
|
fi
|
|
AC_SUBST(EXTRA_FLAGS)
|
|
|
|
ACX_PROG_CC_WARNING_OPTS([-W -Wall -Wwrite-strings -Wstrict-prototypes \
|
|
-Wmissing-prototypes -Wold-style-definition \
|
|
-Wmissing-format-attribute -Wcast-qual],
|
|
[WARN_FLAGS])
|
|
|
|
AC_ARG_ENABLE([werror],
|
|
[AS_HELP_STRING([--disable-werror], [disable building with -Werror])])
|
|
AS_IF([test "x$enable_werror" != "xno" && test -n "${with_target_subdir}"],
|
|
[WARN_FLAGS="$WARN_FLAGS -Werror"])
|
|
AC_SUBST(WARN_FLAGS)
|
|
|
|
if test -n "${with_target_subdir}"; then
|
|
GCC_CHECK_UNWIND_GETIPINFO
|
|
else
|
|
ac_save_CFFLAGS="$CFLAGS"
|
|
CFLAGS="$CFLAGS -Werror-implicit-function-declaration"
|
|
AC_MSG_CHECKING([for _Unwind_GetIPInfo])
|
|
AC_LINK_IFELSE(
|
|
[AC_LANG_PROGRAM(
|
|
[#include "unwind.h"
|
|
struct _Unwind_Context *context;
|
|
int ip_before_insn = 0;],
|
|
[return _Unwind_GetIPInfo (context, &ip_before_insn);])],
|
|
[have_unwind_getipinfo=yes], [have_unwind_getipinfo=no])
|
|
CFLAGS="$ac_save_CFLAGS"
|
|
AC_MSG_RESULT([$have_unwind_getipinfo])
|
|
if test "$have_unwind_getipinfo" = "yes"; then
|
|
AC_DEFINE(HAVE_GETIPINFO, 1, [Define if _Unwind_GetIPInfo is available.])
|
|
fi
|
|
fi
|
|
|
|
# Enable --enable-host-shared.
|
|
AC_ARG_ENABLE(host-shared,
|
|
[AS_HELP_STRING([--enable-host-shared],
|
|
[build host code as shared libraries])],
|
|
[PIC_FLAG=-fPIC], [PIC_FLAG=])
|
|
AC_SUBST(PIC_FLAG)
|
|
|
|
# Enable Intel CET on Intel CET enabled host if jit is enabled.
|
|
GCC_CET_HOST_FLAGS(CET_HOST_FLAGS)
|
|
case x$enable_languages in
|
|
*jit*)
|
|
;;
|
|
*)
|
|
CET_HOST_FLAGS=
|
|
;;
|
|
esac
|
|
AC_SUBST(CET_HOST_FLAGS)
|
|
|
|
# Test for __sync support.
|
|
AC_CACHE_CHECK([__sync extensions],
|
|
[libbacktrace_cv_sys_sync],
|
|
[if test -n "${with_target_subdir}"; then
|
|
case "${host}" in
|
|
hppa*-*-hpux*) libbacktrace_cv_sys_sync=no ;;
|
|
*) libbacktrace_cv_sys_sync=yes ;;
|
|
esac
|
|
else
|
|
AC_LINK_IFELSE(
|
|
[AC_LANG_PROGRAM([int i;],
|
|
[__sync_bool_compare_and_swap (&i, i, i);
|
|
__sync_lock_test_and_set (&i, 1);
|
|
__sync_lock_release (&i);])],
|
|
[libbacktrace_cv_sys_sync=yes],
|
|
[libbacktrace_cv_sys_sync=no])
|
|
fi])
|
|
BACKTRACE_SUPPORTS_THREADS=0
|
|
if test "$libbacktrace_cv_sys_sync" = "yes"; then
|
|
BACKTRACE_SUPPORTS_THREADS=1
|
|
AC_DEFINE([HAVE_SYNC_FUNCTIONS], 1,
|
|
[Define to 1 if you have the __sync functions])
|
|
fi
|
|
AC_SUBST(BACKTRACE_SUPPORTS_THREADS)
|
|
|
|
# Test for __atomic support.
|
|
AC_CACHE_CHECK([__atomic extensions],
|
|
[libbacktrace_cv_sys_atomic],
|
|
[if test -n "${with_target_subdir}"; then
|
|
libbacktrace_cv_sys_atomic=yes
|
|
else
|
|
AC_LINK_IFELSE(
|
|
[AC_LANG_PROGRAM([int i;],
|
|
[__atomic_load_n (&i, __ATOMIC_ACQUIRE);
|
|
__atomic_store_n (&i, 1, __ATOMIC_RELEASE);])],
|
|
[libbacktrace_cv_sys_atomic=yes],
|
|
[libbacktrace_cv_sys_atomic=no])
|
|
fi])
|
|
if test "$libbacktrace_cv_sys_atomic" = "yes"; then
|
|
AC_DEFINE([HAVE_ATOMIC_FUNCTIONS], 1,
|
|
[Define to 1 if you have the __atomic functions])
|
|
fi
|
|
|
|
# The library needs to be able to read the executable itself. Compile
|
|
# a file to determine the executable format. The awk script
|
|
# filetype.awk prints out the file type.
|
|
AC_CACHE_CHECK([output filetype],
|
|
[libbacktrace_cv_sys_filetype],
|
|
[filetype=
|
|
AC_COMPILE_IFELSE(
|
|
[AC_LANG_PROGRAM([int i;], [int j;])],
|
|
[filetype=`${AWK} -f $srcdir/filetype.awk conftest.$ac_objext`],
|
|
[AC_MSG_FAILURE([compiler failed])])
|
|
libbacktrace_cv_sys_filetype=$filetype])
|
|
|
|
# Match the file type to decide what files to compile.
|
|
FORMAT_FILE=
|
|
backtrace_supports_data=yes
|
|
case "$libbacktrace_cv_sys_filetype" in
|
|
elf*) FORMAT_FILE="elf.lo" ;;
|
|
macho) FORMAT_FILE="macho.lo" ;;
|
|
pecoff) FORMAT_FILE="pecoff.lo"
|
|
backtrace_supports_data=no
|
|
;;
|
|
xcoff*) FORMAT_FILE="xcoff.lo"
|
|
backtrace_supports_data=no
|
|
;;
|
|
*) AC_MSG_WARN([could not determine output file type])
|
|
FORMAT_FILE="unknown.lo"
|
|
backtrace_supported=no
|
|
;;
|
|
esac
|
|
AC_SUBST(FORMAT_FILE)
|
|
|
|
# ELF defines.
|
|
elfsize=
|
|
case "$libbacktrace_cv_sys_filetype" in
|
|
elf32) elfsize=32 ;;
|
|
elf64) elfsize=64 ;;
|
|
*) elfsize=unused
|
|
esac
|
|
AC_DEFINE_UNQUOTED([BACKTRACE_ELF_SIZE], [$elfsize], [ELF size: 32 or 64])
|
|
AM_CONDITIONAL(HAVE_ELF, test "$FORMAT_FILE" = "elf.lo")
|
|
|
|
# XCOFF defines.
|
|
xcoffsize=
|
|
case "$libbacktrace_cv_sys_filetype" in
|
|
xcoff32) xcoffsize=32 ;;
|
|
xcoff64) xcoffsize=64 ;;
|
|
*) xcoffsize=unused
|
|
esac
|
|
AC_DEFINE_UNQUOTED([BACKTRACE_XCOFF_SIZE], [$xcoffsize], [XCOFF size: 32 or 64])
|
|
|
|
BACKTRACE_SUPPORTED=0
|
|
if test "$backtrace_supported" = "yes"; then
|
|
BACKTRACE_SUPPORTED=1
|
|
fi
|
|
AC_SUBST(BACKTRACE_SUPPORTED)
|
|
|
|
BACKTRACE_SUPPORTS_DATA=0
|
|
if test "$backtrace_supports_data" = "yes"; then
|
|
BACKTRACE_SUPPORTS_DATA=1
|
|
fi
|
|
AC_SUBST(BACKTRACE_SUPPORTS_DATA)
|
|
|
|
GCC_HEADER_STDINT(gstdint.h)
|
|
|
|
AC_CHECK_HEADERS(sys/mman.h)
|
|
if test "$ac_cv_header_sys_mman_h" = "no"; then
|
|
have_mmap=no
|
|
else
|
|
if test -n "${with_target_subdir}"; then
|
|
# When built as a GCC target library, we can't do a link test. We
|
|
# simply assume that if we have mman.h, we have mmap.
|
|
have_mmap=yes
|
|
case "${host}" in
|
|
*-*-msdosdjgpp)
|
|
# DJGPP has sys/man.h, but no mmap
|
|
have_mmap=no ;;
|
|
esac
|
|
else
|
|
AC_CHECK_FUNC(mmap, [have_mmap=yes], [have_mmap=no])
|
|
fi
|
|
fi
|
|
if test "$have_mmap" = "no"; then
|
|
VIEW_FILE=read.lo
|
|
ALLOC_FILE=alloc.lo
|
|
else
|
|
VIEW_FILE=mmapio.lo
|
|
AC_PREPROC_IFELSE([AC_LANG_SOURCE([
|
|
#include <sys/mman.h>
|
|
#if !defined(MAP_ANONYMOUS) && !defined(MAP_ANON)
|
|
#error no MAP_ANONYMOUS
|
|
#endif
|
|
])], [ALLOC_FILE=mmap.lo], [ALLOC_FILE=alloc.lo])
|
|
fi
|
|
AC_SUBST(VIEW_FILE)
|
|
AC_SUBST(ALLOC_FILE)
|
|
|
|
BACKTRACE_USES_MALLOC=0
|
|
if test "$ALLOC_FILE" = "alloc.lo"; then
|
|
BACKTRACE_USES_MALLOC=1
|
|
fi
|
|
AC_SUBST(BACKTRACE_USES_MALLOC)
|
|
|
|
# Check for dl_iterate_phdr.
|
|
AC_CHECK_HEADERS(link.h sys/link.h)
|
|
if test "$ac_cv_header_link_h" = "no" -a "$ac_cv_header_sys_link_h" = "no"; then
|
|
have_dl_iterate_phdr=no
|
|
else
|
|
if test -n "${with_target_subdir}"; then
|
|
link_h=link.h
|
|
if test "$ac_cv_header_link_h" = "no"; then
|
|
link_h=sys/link.h
|
|
fi
|
|
# When built as a GCC target library, we can't do a link test.
|
|
AC_EGREP_HEADER([dl_iterate_phdr], [$link_h], [have_dl_iterate_phdr=yes],
|
|
[have_dl_iterate_phdr=no])
|
|
else
|
|
AC_CHECK_FUNC([dl_iterate_phdr], [have_dl_iterate_phdr=yes],
|
|
[have_dl_iterate_phdr=no])
|
|
fi
|
|
fi
|
|
if test "$have_dl_iterate_phdr" = "yes"; then
|
|
AC_DEFINE(HAVE_DL_ITERATE_PHDR, 1, [Define if dl_iterate_phdr is available.])
|
|
fi
|
|
|
|
# Check for header file for Mach-O image functions.
|
|
AC_CHECK_HEADERS(mach-o/dyld.h)
|
|
|
|
# Check for loadquery.
|
|
AC_CHECK_HEADERS(sys/ldr.h)
|
|
if test "$ac_cv_header_sys_ldr_h" = "no"; then
|
|
have_loadquery=no
|
|
else
|
|
if test -n "${with_target_subdir}"; then
|
|
# When built as a GCC target library, we can't do a link test.
|
|
AC_EGREP_HEADER([loadquery], [sys/ldr.h], [have_loadquery=yes],
|
|
[have_loadquery=no])
|
|
else
|
|
AC_CHECK_FUNC([loadquery], [have_loadquery=yes],
|
|
[have_loadquery=no])
|
|
fi
|
|
fi
|
|
if test "$have_loadquery" = "yes"; then
|
|
AC_DEFINE(HAVE_LOADQUERY, 1, [Define if AIX loadquery is available.])
|
|
fi
|
|
|
|
# Check for the fcntl function.
|
|
if test -n "${with_target_subdir}"; then
|
|
case "${host}" in
|
|
*-*-mingw*) have_fcntl=no ;;
|
|
*) have_fcntl=yes ;;
|
|
esac
|
|
else
|
|
AC_CHECK_FUNC(fcntl, [have_fcntl=yes], [have_fcntl=no])
|
|
fi
|
|
if test "$have_fcntl" = "yes"; then
|
|
AC_DEFINE([HAVE_FCNTL], 1,
|
|
[Define to 1 if you have the fcntl function])
|
|
fi
|
|
|
|
AC_CHECK_DECLS([strnlen, getpagesize])
|
|
AC_CHECK_FUNCS(lstat readlink)
|
|
|
|
# Check for getexecname function.
|
|
if test -n "${with_target_subdir}"; then
|
|
case "${host}" in
|
|
*-*-solaris2*) have_getexecname=yes ;;
|
|
*) have_getexecname=no ;;
|
|
esac
|
|
else
|
|
AC_CHECK_FUNC(getexecname, [have_getexecname=yes], [have_getexecname=no])
|
|
fi
|
|
if test "$have_getexecname" = "yes"; then
|
|
AC_DEFINE(HAVE_GETEXECNAME, 1, [Define if getexecname is available.])
|
|
fi
|
|
|
|
# Check for _pgmptr variable, contains the executable filename on windows
|
|
AC_CHECK_DECLS([_pgmptr])
|
|
|
|
# Check for sysctl definitions.
|
|
|
|
AC_CACHE_CHECK([for KERN_PROC],
|
|
[libbacktrace_cv_proc],
|
|
[AC_COMPILE_IFELSE(
|
|
[AC_LANG_PROGRAM([
|
|
#include <sys/types.h>
|
|
#include <sys/sysctl.h>
|
|
], [int mib0 = CTL_KERN; int mib1 = KERN_PROC; int mib2 = KERN_PROC_PATHNAME;])],
|
|
[libbacktrace_cv_proc=yes],
|
|
[libbacktrace_cv_proc=no])])
|
|
if test "$libbacktrace_cv_proc" = "yes"; then
|
|
AC_DEFINE([HAVE_KERN_PROC], 1,
|
|
[Define to 1 if you have KERN_PROC and KERN_PROC_PATHNAME in <sys/sysctl.h>.])
|
|
fi
|
|
|
|
AC_CACHE_CHECK([for KERN_PROG_ARGS],
|
|
[libbacktrace_cv_procargs],
|
|
[AC_COMPILE_IFELSE(
|
|
[AC_LANG_PROGRAM([
|
|
#include <sys/types.h>
|
|
#include <sys/sysctl.h>
|
|
], [int mib0 = CTL_KERN; int mib1 = KERN_PROC_ARGS; int mib2 = KERN_PROC_PATHNAME;])],
|
|
[libbacktrace_cv_procargs=yes],
|
|
[libbacktrace_cv_procargs=no])])
|
|
if test "$libbacktrace_cv_procargs" = "yes"; then
|
|
AC_DEFINE([HAVE_KERN_PROC_ARGS], 1,
|
|
[Define to 1 if you have KERN_PROCARGS and KERN_PROC_PATHNAME in <sys/sysctl.h>.])
|
|
fi
|
|
|
|
# Check for the clock_gettime function.
|
|
AC_CHECK_FUNCS(clock_gettime)
|
|
clock_gettime_link=
|
|
# At least for glibc, clock_gettime is in librt. But don't
|
|
# pull that in if it still doesn't give us the function we want. This
|
|
# test is copied from libgomp, and modified to not link in -lrt as
|
|
# we're using this for test timing only.
|
|
if test "$ac_cv_func_clock_gettime" = no; then
|
|
AC_CHECK_LIB(rt, clock_gettime,
|
|
[CLOCK_GETTIME_LINK=-lrt
|
|
AC_DEFINE(HAVE_CLOCK_GETTIME, 1,
|
|
[Define to 1 if you have the `clock_gettime' function.])])
|
|
fi
|
|
AC_SUBST(CLOCK_GETTIME_LINK)
|
|
|
|
dnl Test whether the compiler supports the -pthread option.
|
|
AC_CACHE_CHECK([whether -pthread is supported],
|
|
[libgo_cv_lib_pthread],
|
|
[CFLAGS_hold=$CFLAGS
|
|
CFLAGS="$CFLAGS -pthread"
|
|
AC_COMPILE_IFELSE([AC_LANG_SOURCE([int i;])],
|
|
[libgo_cv_lib_pthread=yes],
|
|
[libgo_cv_lib_pthread=no])
|
|
CFLAGS=$CFLAGS_hold])
|
|
PTHREAD_CFLAGS=
|
|
if test "$libgo_cv_lib_pthread" = yes; then
|
|
PTHREAD_CFLAGS=-pthread
|
|
fi
|
|
AC_SUBST(PTHREAD_CFLAGS)
|
|
|
|
AM_CONDITIONAL(HAVE_PTHREAD, test "$libgo_cv_lib_pthread" = yes)
|
|
|
|
dnl Test whether the compiler and the linker support the -gdwarf-5 option.
|
|
AC_CACHE_CHECK([whether -gdwarf-5 is supported],
|
|
[libbacktrace_cv_lib_dwarf5],
|
|
[CFLAGS_hold=$CFLAGS
|
|
CFLAGS="$CFLAGS -gdwarf-5"
|
|
AC_LINK_IFELSE([AC_LANG_PROGRAM([int i;], [return 0;])],
|
|
[libbacktrace_cv_lib_dwarf5=yes],
|
|
[libbacktrace_cv_lib_dwarf5=no])
|
|
CFLAGS=$CFLAGS_hold])
|
|
AM_CONDITIONAL(HAVE_DWARF5, test "$libbacktrace_cv_lib_dwarf5" = yes)
|
|
|
|
AC_CHECK_LIB([z], [compress],
|
|
[AC_DEFINE(HAVE_ZLIB, 1, [Define if -lz is available.])])
|
|
AM_CONDITIONAL(HAVE_ZLIB, test "$ac_cv_lib_z_compress" = yes)
|
|
|
|
dnl Test whether the linker supports the --build-id option.
|
|
AC_CACHE_CHECK([whether --build-id is supported],
|
|
[libbacktrace_cv_ld_buildid],
|
|
[LDFLAGS_hold=$LDFLAGS
|
|
LDFLAGS="$LDFLAGS -Wl,--build-id"
|
|
AC_LINK_IFELSE([AC_LANG_PROGRAM(,)],
|
|
[libbacktrace_cv_ld_buildid=yes],
|
|
[libbacktrace_cv_ld_buildid=no])
|
|
LDFLAGS=$LDFLAGS_hold])
|
|
AM_CONDITIONAL(HAVE_BUILDID, test "$libbacktrace_cv_ld_buildid" = yes)
|
|
|
|
dnl Test whether the linker supports the --compress-debug-sections option.
|
|
AC_CACHE_CHECK([whether --compress-debug-sections is supported],
|
|
[libgo_cv_ld_compress],
|
|
[LDFLAGS_hold=$LDFLAGS
|
|
LDFLAGS="$LDFLAGS -Wl,--compress-debug-sections=zlib-gnu"
|
|
AC_LINK_IFELSE([AC_LANG_PROGRAM(,)],
|
|
[libgo_cv_ld_compress=yes],
|
|
[libgo_cv_ld_compress=no])
|
|
LDFLAGS=$LDFLAGS_hold])
|
|
AM_CONDITIONAL(HAVE_COMPRESSED_DEBUG, test "$libgo_cv_ld_compress" = yes)
|
|
|
|
AC_CHECK_LIB([zstd], [ZSTD_compress],
|
|
[AC_DEFINE(HAVE_ZSTD, 1, [Define if -lzstd is available.])])
|
|
AM_CONDITIONAL(HAVE_ZSTD, test "$ac_cv_lib_zstd_ZSTD_compress" = yes)
|
|
|
|
dnl Test whether the linker supports --compress-debug-sections=zstd option.
|
|
AC_CACHE_CHECK([whether --compress-debug-sections=zstd is supported],
|
|
[libgo_cv_ld_compress_zstd],
|
|
[LDFLAGS_hold=$LDFLAGS
|
|
LDFLAGS="$LDFLAGS -Wl,--compress-debug-sections=zstd"
|
|
AC_LINK_IFELSE([AC_LANG_PROGRAM(,)],
|
|
[libgo_cv_ld_compress_zstd=yes],
|
|
[libgo_cv_ld_compress_zstd=no])
|
|
LDFLAGS=$LDFLAGS_hold])
|
|
AM_CONDITIONAL(HAVE_COMPRESSED_DEBUG_ZSTD, test "$libgo_cv_ld_compress_zstd" = yes)
|
|
|
|
AC_ARG_VAR(OBJCOPY, [location of objcopy])
|
|
AC_CHECK_PROG(OBJCOPY, objcopy, objcopy,)
|
|
AC_CHECK_PROG(READELF, readelf, readelf)
|
|
AC_CACHE_CHECK([whether objcopy supports debuglink],
|
|
[libbacktrace_cv_objcopy_debuglink],
|
|
[if test -n "${with_target_subdir}"; then
|
|
libbacktrace_cv_objcopy_debuglink=no
|
|
elif ! test -n "${OBJCOPY}"; then
|
|
libbacktrace_cv_objcopy_debuglink=no
|
|
elif ${OBJCOPY} --help | grep add-gnu-debuglink >/dev/null 2>&1; then
|
|
libbacktrace_cv_objcopy_debuglink=yes
|
|
else
|
|
libbacktrace_cv_objcopy_debuglink=no
|
|
fi])
|
|
AM_CONDITIONAL(HAVE_OBJCOPY_DEBUGLINK, test "$libbacktrace_cv_objcopy_debuglink" = yes)
|
|
|
|
AC_ARG_VAR(DSYMUTIL, [location of dsymutil])
|
|
AC_CHECK_PROG(DSYMUTIL, dsymutil, dsymutil)
|
|
AM_CONDITIONAL(USE_DSYMUTIL, test -n "${DSYMUTIL}" -a "$FORMAT_FILE" = "macho.lo")
|
|
|
|
AC_ARG_VAR(NM, [location of nm])
|
|
AC_CHECK_PROG(NM, nm, nm)
|
|
|
|
AC_CHECK_PROG(XZ, xz, xz)
|
|
AM_CONDITIONAL(HAVE_XZ, test "$XZ" != "")
|
|
AC_CHECK_PROG(COMM, comm, comm)
|
|
AM_CONDITIONAL(HAVE_COMM, test "$COMM" != "")
|
|
|
|
AM_CONDITIONAL(HAVE_MINIDEBUG,
|
|
test "${with_target_subdir}" = "" -a "$FORMAT_FILE" = "elf.lo" -a "${OBJCOPY}" != "" -a "${NM}" != "" -a "${XZ}" != "" -a "${COMM}" != "")
|
|
|
|
AC_CHECK_LIB([lzma], [lzma_auto_decoder],
|
|
[AC_DEFINE(HAVE_LIBLZMA, 1, [Define if -llzma is available.])])
|
|
AM_CONDITIONAL(HAVE_LIBLZMA, test "$ac_cv_lib_lzma_lzma_auto_decoder" = yes)
|
|
|
|
AC_CACHE_CHECK([whether tests can run],
|
|
[libbacktrace_cv_sys_native],
|
|
[AC_RUN_IFELSE([AC_LANG_PROGRAM([], [return 0;])],
|
|
[libbacktrace_cv_sys_native=yes],
|
|
[libbacktrace_cv_sys_native=no],
|
|
[libbacktrace_cv_sys_native=no])])
|
|
AM_CONDITIONAL(NATIVE, test "$libbacktrace_cv_sys_native" = "yes")
|
|
|
|
if test "${multilib}" = "yes"; then
|
|
multilib_arg="--enable-multilib"
|
|
else
|
|
multilib_arg=
|
|
fi
|
|
|
|
AC_CONFIG_FILES(Makefile backtrace-supported.h)
|
|
AC_CONFIG_FILES(install-debuginfo-for-buildid.sh, chmod +x install-debuginfo-for-buildid.sh)
|
|
|
|
# We need multilib support, but only if configuring for the target.
|
|
AC_CONFIG_COMMANDS([default],
|
|
[if test -n "$CONFIG_FILES"; then
|
|
if test -n "${with_target_subdir}"; then
|
|
# Multilibs need MULTISUBDIR defined correctly in certain makefiles so
|
|
# that multilib installs will end up installed in the correct place.
|
|
# The testsuite needs it for multilib-aware ABI baseline files.
|
|
# To work around this not being passed down from config-ml.in ->
|
|
# srcdir/Makefile.am -> srcdir/{src,libsupc++,...}/Makefile.am, manually
|
|
# append it here. Only modify Makefiles that have just been created.
|
|
#
|
|
# Also, get rid of this simulated-VPATH thing that automake does.
|
|
cat > vpsed << \_EOF
|
|
s!`test -f '$<' || echo '$(srcdir)/'`!!
|
|
_EOF
|
|
for i in $SUBDIRS; do
|
|
case $CONFIG_FILES in
|
|
*${i}/Makefile*)
|
|
#echo "Adding MULTISUBDIR to $i/Makefile"
|
|
sed -f vpsed $i/Makefile > tmp
|
|
grep '^MULTISUBDIR =' Makefile >> tmp
|
|
mv tmp $i/Makefile
|
|
;;
|
|
esac
|
|
done
|
|
rm vpsed
|
|
fi
|
|
fi
|
|
],
|
|
[
|
|
# Variables needed in config.status (file generation) which aren't already
|
|
# passed by autoconf.
|
|
SUBDIRS="$SUBDIRS"
|
|
])
|
|
|
|
AC_OUTPUT
|