Add configure check for the __getauxval ABI symbol, which is always
available on aarch64 glibc, and may be available on other linux C
runtimes. For now only enabled on glibc, others have to override it
target_configargs=libgcc_cv_have___getauxval=yes
This is deliberately obscure as it should be auto detected, ideally
via a feature test macro in unistd.h (link time detection is not
possible since the libc may not be installed at libgcc build time),
but currently there is no such feature test mechanism.
Without __getauxval, libgcc cannot do runtime CPU feature detection
and has to assume only the build time known features are available.
libgcc/ChangeLog:
* config.in: Undef HAVE___GETAUXVAL.
* configure: Regenerate.
* configure.ac: Check for __getauxval.
Ideally SME support routines in libgcc are marked as variant PCS symbols
so check if as supports the directive.
libgcc/ChangeLog:
* config.in: Undef HAVE_AS_VARIANT_PCS.
* configure: Regenerate.
* configure.ac: Check for .variant_pcs.
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
config/ChangeLog:
* picflag.m4: Simplify SHmedia NetBSD match by presuming ELF.
gcc/ChangeLog:
* configure: Regenerate.
libada/ChangeLog:
* configure: Regenerate.
libgcc/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
Apparently some distros have a nagging egrep that helpfully tells you
egrep is deprecated and to use "grep -E". The nag message causes a ld
testsuite failure. What's more the advice isn't that good. The "-E"
flag may not be available with older versions of grep.
This patch fixes bare invocation of egrep within binutils, replacing
it with the autoconf $EGREP or with grep.
config/ChangeLog:
* lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and
invoke $EGREP.
(AC_LIB_PROG_LD): Likewise.
gcc/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libcpp/ChangeLog:
* configure: Regenerate.
libgcc/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
This patch adds the new thread model `mcf`, which implements mutexes
and condition variables with the mcfgthread library.
Source code for mcfgthread is available at <https://github.com/lhmouse/mcfgthread>.
config/ChangeLog:
* gthr.m4 (GCC_AC_THREAD_HEADER): Add new case for `mcf` thread
model
gcc/ChangeLog:
* config/i386/mingw-mcfgthread.h: New file
* config/i386/mingw32.h: Add builtin macro and default libraries
for mcfgthread when thread model is `mcf`
* config.gcc: Include 'i386/mingw-mcfgthread.h' when thread model
is `mcf`
* configure.ac: Recognize `mcf` as a valid thread model
* config.in: Regenerate
* configure: Regenerate
libatomic/ChangeLog:
* configure.tgt: Add new case for `mcf` thread model
libgcc/ChangeLog:
* config.host: Add new cases for `mcf` thread model
* config/i386/gthr-mcf.h: New file
* config/i386/t-mingw-mcfgthread: New file
* config/i386/t-slibgcc-cygming: Add mcfgthread for libgcc DLL
* configure: Regenerate
libstdc++-v3/ChangeLog:
* libsupc++/atexit_thread.cc (__cxa_thread_atexit): Use
implementation from mcfgthread if available
* libsupc++/guard.cc (__cxa_guard_acquire, __cxa_guard_release,
__cxa_guard_abort): Use implementations from mcfgthread if
available
* configure: Regenerate
This patch changes the build machinery in order to disable the build
of GCOV (both compiler and libgcc) in bpf-*-* targets. The reason for
this change is that BPF is (currently) too restricted in order to
support the coverage instrumentalization.
Tested in bpf-unknown-none and x86_64-linux-gnu targets.
2022-02-23 Jose E. Marchesi <jose.marchesi@oracle.com>
gcc/ChangeLog
PR target/104656
* configure.ac: --disable-gcov if targetting bpf-*.
* configure: Regenerate.
libgcc/ChangeLog
PR target/104656
* configure.ac: --disable-gcov if targetting bpf-*.
* configure: Regenerate.
The recent float128 ISA3.1 support (r12-1340) has some typos,
it makes the libgcc build fail if it's with one binutils
(assembler) which doesn't support Power10 insns. The error
looks like:
Error: invalid switch -mpower10
Error: unrecognized option -mpower10
... [...libgcc/shared-object.mk:14: float128-p10.o] Error 1
What this patch does are:
- fix test target typo libgcc_cv_powerpc_3_1_float128_hw
(written wrongly as libgcc_cv_powerpc_float128_hw, so it's
going to build ISA3.1 stuffs just when detecting ISA3.0).
- fix test used for libgcc_cv_powerpc_3_1_float128_hw check.
- fix test option used for libgcc_cv_powerpc_3_1_float128_hw
check.
- remove the ISA3.1 related contents from t-float128-hw.
- add new macro FLOAT128_HW_INSNS_ISA3_1 to differentiate
ISA3.1 content from ISA3.0 part in ifunc support.
Bootstrapped/regtested on:
- powerpc64le-linux-gnu P10
- powerpc64le-linux-gnu P9 (w/i and w/o p10 supported as)
- powerpc64-linux-gnu P8 (w/i and w/o p10 supported as)
libgcc/ChangeLog:
* configure: Regenerate.
* configure.ac (test for libgcc_cv_powerpc_3_1_float128_hw): Fix
typos among the name, CFLAGS and the test.
* config/rs6000/t-float128-hw (fp128_3_1_hw_funcs, fp128_3_1_hw_src,
fp128_3_1_hw_static_obj, fp128_3_1_hw_shared_obj, fp128_3_1_hw_obj):
Remove.
* config/rs6000/t-float128-p10-hw (FLOAT128_HW_INSNS): Append
macro FLOAT128_HW_INSNS_ISA3_1.
(FP128_3_1_CFLAGS_HW): Fix option typo.
* config/rs6000/float128-ifunc.c (SW_OR_HW_ISA3_1): Guard this with
FLOAT128_HW_INSNS_ISA3_1.
(__floattikf_resolve): Likewise.
(__floatuntikf_resolve): Likewise.
(__fixkfti_resolve): Likewise.
(__fixunskfti_resolve): Likewise.
(__floattikf): Likewise.
(__floatuntikf): Likewise.
(__fixkfti): Likewise.
(__fixunskfti): Likewise.
The files fixkfti-sw.c and fixunskfti-sw.c are renamed versions of
fixkfti.c and fixunskfti.c respectively to do the conversions in software.
The function names in the files were updated with the rename as well as
some white spaces fixes. The file float128-p10.c contains the functions
for using the ISA 3.1 hardware instructions to perform the conversions.
2021-06-08 Carl Love <cel@us.ibm.com>
gcc/ChangeLog
* config/rs6000/rs6000.c (__fixkfti, __fixunskfti, __floattikf,
__floatuntikf): Names changed to __fixkfti_sw, __fixunskfti_sw,
__floattikf_sw, __floatuntikf_sw respectively.
* config/rs6000/rs6000.md (floatti<mode>2, floatunsti<mode>2,
fix_trunc<mode>ti2, fixuns_trunc<mode>ti2): Add
define_insn for mode IEEE 128.
gcc/testsuite/ChangeLog
* gcc.target/powerpc/fp128_conversions.c: New file.
* gcc.target/powerpc/int_128bit-runnable.c(vextsd2q,
vcmpuq, vcmpsq, vcmpequq, vcmpequq., vcmpgtsq, vcmpgtsq.
vcmpgtuq, vcmpgtuq.): Update scan-assembler-times.
(ppc_native_128bit): Remove dg-require-effective-target.
libgcc/ChangeLog
* config.host: Add if test and set for
libgcc_cv_powerpc_3_1_float128_hw.
* config/rs6000/fixkfti.c: Renamed to fixkfti-sw.c.
Change calls of __fixkfti to __fixkfti_sw.
* config/rs6000/fixunskfti.c: Renamed to fixunskfti-sw.c.
Change calls of __fixunskfti to __fixunskfti_sw.
* config/rs6000/float128-p10.c (__floattikf_hw,
__floatuntikf_hw, __fixkfti_hw, __fixunskfti_hw): New file.
* config/rs6000/float128-ifunc.c (SW_OR_HW_ISA3_1): New macro.
(__floattikf_resolve, __floatuntikf_resolve, __fixkfti_resolve,
__fixunskfti_resolve): Add resolve functions.
(__floattikf, __floatuntikf, __fixkfti, __fixunskfti): New functions.
* config/rs6000/float128-sed (floattitf, __floatuntitf,
__fixtfti, __fixunstfti): Add editor commands to change names.
* config/rs6000/float128-sed-hw (__floattitf,
__floatuntitf, __fixtfti, __fixunstfti): Add editor commands to
change names.
* config/rs6000/floattikf.c: Renamed to floattikf-sw.c.
* config/rs6000/floatuntikf.c: Renamed to floatuntikf-sw.c.
* config/rs6000/quad-float128.h (__floattikf_sw,
__floatuntikf_sw, __fixkfti_sw, __fixunskfti_sw, __floattikf_hw,
__floatuntikf_hw, __fixkfti_hw, __fixunskfti_hw, __floattikf,
__floatuntikf, __fixkfti, __fixunskfti): New extern declarations.
* config/rs6000/t-float128 (floattikf, floatuntikf,
fixkfti, fixunskfti): Remove file names from fp128_ppc_funcs.
(floattikf-sw, floatuntikf-sw, fixkfti-sw, fixunskfti-sw): Add
file names to fp128_ppc_funcs.
* config/rs6000/t-float128-hw(fp128_3_1_hw_funcs,
fp128_3_1_hw_src, fp128_3_1_hw_static_obj, fp128_3_1_hw_shared_obj,
fp128_3_1_hw_obj): Add variables for ISA 3.1 support.
* config/rs6000/t-float128-p10-hw: New file.
* configure: Update script for isa 3.1 128-bit float support.
* configure.ac: Add check for 128-bit float hardware support.
This change introduces support for the most recent versions
of VxWorks on PowerPC targets, for both 32 and 64 bit thanks
to a bi-arch setup.
The system compilers are essentially configured as Linux
toolchains with only a few specificities and we replicate
that model here.
The most visible specificities are the use of secureplt by
default, the pre-definition of some macros that the system
headers still rely on (_VX_CPU and _VX_CPU_FAMILY, for example),
and of course some variations related to the so VxWorks typical
kernel vs RTP mode distinction.
In addition to the introduction of config.gcc and libgcc
configuration chunks, much inspired by the linux ones, the
change
- Reworks rs6000/vxworks.h file to feature bits common to the
Vx6 and Vx7 port then a separate section for each, where the
Vx7 part is very short as we rely on the Linux definitions
for most things.
- Adjusts the CPU macro predefinitions in CPP_SPEC to resort
to "_VX_CPU" instead of "CPU" for Vx7, to better match the
more recent system headers expectations,
- Adds a cpu definition case for e6500.
- Changes to the use SUB3TARGET_OVERRIDE_OPTIONS instead of
SUBSUBTARGET_OVERRIDE_OPTIONS for specifics, so we don't
override the Linux's version of the latter for vx7.
2020-10-20 Douglas Rupp <rupp@adacore.com>
gcc/
* config.gcc (powerpc*-wrs-vxworks7r*): New case.
* config/rs6000/vxworks.h: Rework to handle VxWorks7.
Refactor as common bits + vx6 vs vx7 ones. For the
latter, rely essentially on the Linux configuration
and adjust CPU to _VX_CPU in CPP_SPEC. Add a case
for e6500. Use SUB3TARGET_OVERRIDE_OPTIONS for specifics
to preserve the Linux SUBSUBTARGET_OVERRIDE_OPTIONS
for vx7.
libgcc/
* config.host (powerpc*-wrs-vxworks7*): New case.
* configure.ac: Handle powerpc*-*-vxworks7* as
powerpc*-*-linux* for ppc-fp_type.
* configure: Regenerate.
Co-authored-by: Olivier Hainque <hainque@adacore.com>
As reported in the PR, GCC 10 (and also 9.3.1 but not 9.3.0) fails to build
when using older binutils which lack LSE support, because those instructions
are used in libgcc.
Thanks to Kyrylo's hint, the following patches (hopefully) allow it to build
even with older binutils by using .inst directive if LSE support isn't
available in the assembler.
2020-04-15 Jakub Jelinek <jakub@redhat.com>
PR target/93053
* configure.ac (LIBGCC_CHECK_AS_LSE): Add HAVE_AS_LSE checking.
* config/aarch64/lse.S: Include auto-target.h, if HAVE_AS_LSE
is not defined, use just .arch armv8-a.
(B, M, N, OPN): Define.
(COMMENT): New .macro.
(CAS, CASP, SWP, LDOP): Use .inst directive if HAVE_AS_LSE is not
defined. Otherwise, move the operands right after the glue? and
comment out operands where the macros are used.
* configure: Regenerated.
* config.in: Regenerated.
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
contrib/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-list.mk: Add msp430-elfbare.
gcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.gcc: s/msp430*-*-*/msp430-*-*.
Handle msp430-*-elfbare.
* config/msp430/msp430-devices.c (TARGET_SUBDIR): Define.
(_MSPMKSTR): Define.
(__MSPMKSTR): Define.
(rest_of_devices_path): Use TARGET_SUBDIR value in string.
* config/msp430/msp430.c (msp430_option_override): Error if
-fuse-cxa-atexit is used when it has been disabled at configure time.
* config/msp430/t-msp430: Define TARGET_SUBDIR when building
msp430-devices.o.
* doc/install.texi: Document msp430-*-elf and msp430-*-elfbare.
* doc/invoke.texi: Update documentation about which path devices.csv is
searched for.
gcc/testsuite/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* g++.dg/init/dso_handle1.C: Require cxa_atexit support.
* g++.dg/init/dso_handle2.C: Likewise.
* g++.dg/other/cxa-atexit1.C: Likewise.
* gcc.target/msp430/msp430.exp: Update csv-using-installed.c test to
handle msp430-elfbare configuration.
libgcc/ChangeLog:
2019-12-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: s/msp430*-*-elf/msp430-*-elf*.
Override default "extra_parts" variable.
* configure: Regenerate.
* configure.ac: Disable TM clone registry by default for
msp430-elfbare.
From-SVN: r279442
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
For some targets (in my case VxWorks 5.5), libgcov does not compile due
to missing functions and macros such as getpid() and F_OK.
Incidentally, gcc/Makefile.in already contains comments such as
# Install gcov if it was compiled.
but there is no logic in place to actually allow gcov to not be
compiled.
So add an option for disabling build and install of libgcov and the
related host tools.
From-SVN: r262180
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
PR debug/83917
* configure.ac (AS_HIDDEN_DIRECTIVE): AC_DEFINE_UNQUOTED this to
$asm_hidden_op if visibility ("hidden") attribute works.
(HAVE_AS_CFI_SECTIONS): New AC_DEFINE.
* config/i386/i386-asm.h: Don't include auto-host.h.
(PACKAGE_VERSION, PACKAGE_NAME, PACKAGE_STRING, PACKAGE_TARNAME,
PACKAGE_URL): Don't undefine.
(USE_GAS_CFI_DIRECTIVES): Don't use nor define this macro, instead
guard cfi_startproc only on ifdef __GCC_HAVE_DWARF2_CFI_ASM.
(FN_HIDDEN): Change guard from #ifdef HAVE_GAS_HIDDEN to
#ifdef AS_HIDDEN_DIRECTIVE, use AS_HIDDEN_DIRECTIVE macro in the
definition instead of hardcoded .hidden.
* config/i386/cygwin.S: Include i386-asm.h first before .cfi_sections
directive. Use #ifdef HAVE_AS_CFI_SECTIONS rather than
#ifdef HAVE_GAS_CFI_SECTIONS_DIRECTIVE to guard .cfi_sections.
(USE_GAS_CFI_DIRECTIVES): Don't define.
* configure: Regenerated.
* config.in: Likewise.
From-SVN: r258057
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Enable building libgcc with CET options by default on Linux/x86 if
binutils supports CET v2.0. It can be disabled with --disable-cet.
It is an error to configure GCC with --enable-cet if bintuiils
doesn't support CET v2.0.
ENDBR instruction is added to __morestack_large_model since it is
called indirectly.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
config/
* cet.m4: New file.
gcc/
* config.gcc (extra_headers): Add cet.h for x86 targets.
* config/i386/cet.h: New file.
* doc/install.texi: Add --enable-cet/--disable-cet.
libgcc/
* Makefile.in (configure_deps): Add $(srcdir)/../config/cet.m4.
(CET_FLAGS): New.
* config/i386/morestack.S: Include <cet.h>.
(__morestack_large_model): Add _CET_ENDBR at function entrance.
* config/i386/resms64.h: Include <cet.h>.
* config/i386/resms64f.h: Likewise.
* config/i386/resms64fx.h: Likewise.
* config/i386/resms64x.h: Likewise.
* config/i386/savms64.h: Likewise.
* config/i386/savms64f.h: Likewise.
* config/i386/t-linux (HOST_LIBGCC2_CFLAGS): Add $(CET_FLAGS).
(CRTSTUFF_T_CFLAGS): Likewise.
* configure.ac: Include ../config/cet.m4.
Set and substitute CET_FLAGS.
* configure: Regenerated.
From-SVN: r254868
[gcc]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): If GLIBC
provides the hardware capability bits, define the macro
__BUILTIN_CPU_SUPPORTS__.
* config/rs6000/rs6000.c (cpu_expand_builtin): Generate a warning
if GLIBC does not provide the hardware capability bits. Add a
gcc_unreachable call if the built-in cpu function is neither
__builtin_cpu_is nor __builtin_cpu_supports.
(rs6000_get_function_versions_dispatcher): Change the warning
that an old GLIBC is used which does not export the capability
bits to be an error.
* doc/extend.texi (target_clones attribute): Document the
restriction that GLIBC 2.23 or newer is needed on the PowerPC.
(PowerPC built-in functions): Document that GLIBC 2.23 or newer is
needed by __builtin_cpu_is and __builtin_cpu_supports. Document
the macros defined by GCC if the newer GLIBC is available.
[gcc/testsuite]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* gcc.target/powerpc/bmi-andn-1.c: Add guard against using
__builtin_cpu_supports with old GLIBC's.
* gcc.target/powerpc/bmi-andn-2.c: Likewise.
* gcc.target/powerpc/bmi-bextr-1.c: Likewise.
* gcc.target/powerpc/bmi-bextr-2.c: Likewise.
* gcc.target/powerpc/bmi-bextr-4.c: Likewise.
* gcc.target/powerpc/bmi-bextr-5.c: Likewise.
* gcc.target/powerpc/bmi-blsi-1.c: Likewise.
* gcc.target/powerpc/bmi-blsi-2.c: Likewise.
* gcc.target/powerpc/bmi-blsmsk-1.c: Likewise.
* gcc.target/powerpc/bmi-blsmsk-2.c: Likewise.
* gcc.target/powerpc/bmi-blsr-1.c: Likewise.
* gcc.target/powerpc/bmi-blsr-2.c: Likewise.
* gcc.target/powerpc/bmi-tzcnt-1.c: Likewise.
* gcc.target/powerpc/bmi-tzcnt-2.c: Likewise.
* gcc.target/powerpc/bmi2-bzhi32-1.c: Likewise.
* gcc.target/powerpc/bmi2-bzhi64-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx32-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx32-2.c: Likewise.
* gcc.target/powerpc/bmi2-mulx64-1.c: Likewise.
* gcc.target/powerpc/bmi2-mulx64-2.c: Likewise.
* gcc.target/powerpc/bmi2-pdep32-1.c: Likewise.
* gcc.target/powerpc/bmi2-pdep64-1.c: Likewise.
* gcc.target/powerpc/bmi2-pext32-1.c: Likewise.
* gcc.target/powerpc/bmi2-pext64-1.c: Likewise.
* gcc.target/powerpc/cpu-builtin-1.c: Likewise.
[libgcc]
2017-07-12 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/81193
* configure.ac (PowerPC float128 hardware support): Test whether
we can use __builtin_cpu_supports before enabling the ifunc
handler.
* configure: Regenerate.
From-SVN: r250165
2017-06-21 Richard Biener <rguenther@suse.de>
PR gcov-profile/81080
* configure.ac: Add AC_SYS_LARGEFILE.
* libgcov.h: Include auto-target.h before tsystem.h to pick
up _FILE_OFFSET_BITS which might differ for multilibs.
* config.in: Regenerate.
* configure: Likewise.
From-SVN: r249435
This fixes float128 on BE and on 32-bit.
The configure tests need to use -mabi=altivec for 32-bit, since it is
not the default there. That also enables the "vector" keyword, used by
the tests. To do this it temporarily adds a few flags to the CFLAGS
variable.
It also fixes a syntax error in the libgcc_cv_powerpc_float128_hw test
(the function name was missing in the function declaration).
Regenerating config.in (via autoreconf) removed the duplicate definition
of HAVE_SOLARIS_CRTS.
Finally, this adds a "-mfloat128-hardware requires -m64" test to
rs6000.c: all the current patterns need 64-bit registers. Maybe we'll
want to add float128 hardware support to 32-bit some day, but certainly
not today.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Disallow
-mfloat128-hardware without -m64.
libgcc/
* configure.ac (test for libgcc_cv_powerpc_float128): Temporarily
modify CFLAGS. Add -mabi=altivec -mvsx -mfloat128.
(test for libgcc_cv_powerpc_float128_hw): Add -mpower9-vector and
-mfloat128-hardware to the CFLAGS. Fix syntax error in the C snippet.
* configure: Regenerate.
* config.in: Regenerate.
From-SVN: r246043
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
* configure.ac: Do not create links, only substitute the filenames.
* configure: Regenerate.
* Makefile.in: Assign the substitution results to variables.
(LIBGCC_LINKS): Define.
(enable-execute-stack.c): New rule.
(unwind.h): Likewise.
(md-unwind-support.h): Likewise.
(sfp-machine.h): Likewise.
(gthr-default.h): Likewise.
Add $(LIBGCC_LINKS) to the prerequisites of all object files and
unwind.h as prerequisite of install-unwind_h-forbuild.
From-SVN: r240312
[gcc]
2016-04-11 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/70381
* config/rs6000/rs6000.c (rs6000_opt_masks): Disable using the
target attribute and pragma from changing the -mfloat128
and -mfloat128-hardware options.
* doc/extend.texi (Additional Floating Types): Document PowerPC
__float128 restrictions.
[libgcc]
2016-04-11 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/70381
* configure.ac (powerpc*-*-linux*): Rework tests to build
__float128 emulation routines to not depend on using #pragma GCC
target to enable -mfloat128.
* configure: Regnerate.
[gcc/testsuite]
2016-04-11 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/70381
* gcc.target/powerpc/float128-1.c: New tests to make sure the
__float128 emulator is built and runs.
* gcc.target/powerpc/float128-1.c: Likewise.
* lib/target-supports.exp (check_ppc_float128_sw_available):
Rework tests for __float128 software and hardware
availability. Fix exit condition to return 0 on success.
From-SVN: r234884
Kewen Lin