* libsupc++/compare (common_comparison_category): Define without using
concepts and optimise for compilation time.
(__detail::__cmp_cat_ids): Remove.
(__detail::__common_cmp_cat): Replace class template and
specializations with constexpr function.
From-SVN: r279307
2019-12-12 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_ch13.adb (Same_Reprewentation): if the actual in a call is
a generic actual type, use its bsae type to determine whether a
change of representastion may be necessary for proper parameter
passing.
From-SVN: r279305
2019-12-12 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_type.adb (Find_Unique_Type): A call to the universal
access equality operator requires one operand to be a universal
access, and the other to be an access type. There is no
requirement, as previously implied by this routine, that
pool-specific access types were illegal in this context.
From-SVN: r279304
2019-12-12 Steve Baird <baird@adacore.com>
gcc/ada/
* sem_ch6.adb
(New_Overloaded_Entity.Check_Conforming_Paramters): Add new
Conformance_Type parameter. With the value of
Subtype_Conformant, the behavior of Check_Conforming_Parameters
is unchanged. The call in Matching_Entry_Or_Subprogram to
instead passes in Type_Conformant. This corresponds to the use
of "type conformant" in Ada RM 9.4(11.4/3).
(New_Overloaded_Entity.Has_Matching_Entry_Or_Subprogram): Add
new Normalized_First_Parameter_Type function to help in ignoring
the distinction between protected and access-to-protected first
parameters when checking prefixed-view profile matching. Replace
computations of the type of the first parameter with calls to
this function as appropriate.
From-SVN: r279303
2019-12-12 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_ch5.adb: (Analyze_Iterator_Specification): If the
iteration is over a slice, complete the resolution of its
bounds, which may be aebitrary expressions. The previous
pre-analysis may have created itypes for the slice but has not
performed the expansion that for example may introduce actions
that specify explicit dereferences and run-time checks.
From-SVN: r279302
2019-12-12 Gary Dismukes <dismukes@adacore.com>
gcc/ada/
* exp_ch9.adb (Build_Protected_Entry): Set the Scope of the new
block to be the entity of the procedure created for the entry.
From-SVN: r279300
2019-12-12 Steve Baird <baird@adacore.com>
gcc/ada/
* sem_ch10.adb (Install_With_Clause): Check for the case of a
circular dependency involving a predefined (or GNAT-defined)
unit and handle that case by generating an appropropriate error
message.
From-SVN: r279299
2019-12-12 Eric Botcazou <ebotcazou@adacore.com>
gcc/ada/
* exp_attr.adb (Expand_Size_Attribute): Look directly at the
prefix to detect the bit-packed slices. Apply the checks last
in case the attribute needs to be processed by the back-end.
* exp_ch4.adb (Expand_N_Slice): Do not create a temporary for
a prefix of the Size attribute.
From-SVN: r279293
2019-12-12 Gary Dismukes <dismukes@adacore.com>
gcc/ada/
* exp_ch9.adb (Build_Protected_Entry): Analyze the block created
to hold the declarations and statements of the protected entry
body right after it's created, and then call Reset_Scopes_To on
that block to reset the Scope of nested entities to the block
scope.
(Reset_Scope): Add handling for N_Freeze_Entity nodes, calling
Reset_Scopes recursively on the Actions of such nodes. Also, for
subprogram bodies that are encountered that might not have a
separate declaration (such as type init procedures), reset the
Scope of the subprogram's entity.
From-SVN: r279289
2019-12-12 Bob Duff <duff@adacore.com>
gcc/ada/
* sem_attr.adb (Eval_Attribute): Never mark T'Descriptor_Size as
static, even if T is a static subtype, because otherwise we will
request the value of the attribute, which will crash because we
have not evaluated it.
From-SVN: r279287
2019-12-12 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* exp_ch5.adb (Expand_N_Assognment_Statement): Extend the
processing involving private types with unknown discriminants to
handle the case where the full view of the type is an
unconstrained array type.
From-SVN: r279286
2019-12-12 Claire Dross <dross@adacore.com>
gcc/ada/
* libgnat/a-cofove.adb, libgnat/a-cfinve.adb (Find_Index): Use
Extended_Index for call to Last.
From-SVN: r279284
2019-12-12 Bob Duff <duff@adacore.com>
gcc/ada/
* doc/gnat_ugn/gnat_utility_programs.rst: Update gnatmetric
documentation for average lengths
From-SVN: r279282
2019-12-12 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_ch3.adb (Constrain_Access): Remove obsolete comments and
warning concerning component types of an access type whose
designated type is a constrained record type. (Such constraints
were previously ignored). Set scope of itype for component to
the scope of the enclosing record.
* sem_ch4.adb: Remove call to Set_Ekind.
* sem_util.adb (Build_Actual_Subtype_Of_Component): Handle
components whose type is an access to a constrained
discriminant, where the constraints may be given by the
discriminants of the enclosing type. New subprogram
Build_Access_Record_Constraint.
gcc/testsuite/
* gnat.dg/warn24.adb: Remove expected warning.
From-SVN: r279281
2019-12-12 Justin Squirek <squirek@adacore.com>
gcc/ada/
* exp_ch6.adb (Expand_Call_Helper): Added null case for
'Loop_Entry, 'Old, and 'Result when calculating whether to
create extra accessibility parameters.
* sem_util.adb (Dynamic_Accessibility_Level): Added null case
for 'Loop_Entry, 'Old, and 'Result when calculating
accessibility level based on access-valued attributes. Also
added special handling for uses of 'Loop_Entry when used in its
indexed component form.
From-SVN: r279280
2019-12-12 Dmitriy Anisimkov <anisimko@adacore.com>
gcc/ada/
* libgnat/g-comlin.ads (Get_Argument): New routine similar to
original Get_Argument but with one more out parameter
End_Of_Arguments.
(Get_Arguments): Comment improved.
* libgnat/g-comlin.adb (Get_Argument): Implementation taken from
original Get_Argument and improved.
(Get_Argument): Calls new routine Get_Argument with additional
parameter.
From-SVN: r279277
PR 92846:
ARC gcc generates FDCMP instructions which raises Invalid operation for
signaling NaN only. This causes glibc iseqsig() primitives to fail (in
the current ongoing glibc port to ARC)
So break up the hard float compares into tw categories and for unordered
compares generate the FDCMPF instructions which raised exception for
either NaNs.
With this fix testsuite/gcc.dg/torture/pr52451.c passes for ARC.
Also no regressions for the glibc math testsuite, only 6 additional
passes for test*iseqsig
gcc/
xxxx-xx-xx Vineet Gupta <vgupta@synopsys.com>
* config/arc/arc-modes.def (CC_FPUE): New Mode CC_FPUE which
helps codegen generate exceptions even for quiet NaN.
* config/arc/arc.c (arc_init_reg_tables): Handle New CC_FPUE mode.
(get_arc_condition_code): Likewise.
(arc_select_cc_mode): LT, LE, GT, GE to use the New CC_FPUE mode.
* config/arc/arc.h (REVERSE_CONDITION): Handle New CC_FPUE mode.
* config/arc/predicates.md (proper_comparison_operator): Likewise.
* config/arc/fpu.md (cmpsf_fpu_trap): New Pattern for CC_FPUE.
(cmpdf_fpu_trap): Likewise.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
From-SVN: r279274
Allow the compiler to use the double-precision compare instructions.
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* config/arc/arc.md (iterator SDF): Check TARGET_FP_DP_BASE.
(cstoredi4): Use TARGET_HARD_FLOAT.
From-SVN: r279273
* opts.c (default_options_table): Move -ftree-loop-distribute-patterns
entry from -O3 or later section to -O2 or later section.
* doc/invoke.texi (-ftree-loop-distribute-patterns): Mention the
option is enabled by default at -O2+ rather than just at -O3.
From-SVN: r279267
PR fortran/92899
* trans-openmp.c (gfc_trans_omp_atomic): For GFC_OMP_ATOMIC_SWAP,
do look through conversion on expr2 if any.
* testsuite/libgomp.fortran/atomic1.f90: New test.
From-SVN: r279266
PR target/92723
* tree-vect-patterns.c (vect_recog_rotate_pattern): If dt is not
vect_internal_def, use oprnd1 as is, without trying to cast it.
Formatting fix.
* gcc.dg/vect/pr92723.c: New test.
From-SVN: r279265
gcc/ChangeLog:
* builtins.c (compute_objsize): Add an argument and set it to offset
into destination.
* builtins.h (compute_objsize): Add an argument.
* tree-object-size.c (addr_object_size): Add an argument and set it
to offset into destination.
(compute_builtin_object_size): Same.
* tree-object-size.h (compute_builtin_object_size): Add an argument.
* tree-ssa-strlen.c (get_addr_stridx): Add an argument and set it
to offset into destination.
(maybe_warn_overflow): New function.
(handle_store): Call maybe_warn_overflow to issue warnings.
gcc/testsuite/ChangeLog:
* c-c++-common/Wstringop-overflow-2.c: Adjust text of expected messages.
* g++.dg/warn/Wstringop-overflow-3.C: Same.
* gcc.dg/Wstringop-overflow-17.c: Same.
From-SVN: r279248
ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-ml.in (msp430-*-*): Support --disable-no-exceptions configure
flag.
gcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (STARTFILE_SPEC) [!fexceptions]: Use
crtbegin_no_eh.o if building for the C language.
[fno-exceptions]: Use crtbegin_no_eh.o if building for any language
except C.
(ENDFILE_SPEC) [!fexceptions]: Use crtend_no_eh.o if building for
the C language.
[fno-exceptions]: Use crtend_no_eh.o if building for any language
except C.
* config/msp430/t-msp430: Add -fno-exceptions multilib.
* doc/install.texi: Document --disable-no-exceptions multilib configure
option.
* doc/sourcebuild.texi: Document exceptions_enabled effective target.
gcc/testsuite/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* lib/gcc-dg.exp: Add dg-prune messages for when exception handling is
disabled.
* lib/target-supports.exp (check_effective_target_exceptions_enabled):
New.
libgcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: Add crt{begin,end}_no_eh.o to "extra_parts".
* config.host (msp430*-*-elf): Add crt{begin,end}_no_eh.o to
"extra_parts".
From-SVN: r279246
This patch provides a way to clone a pretty_printer.
This is needed so that we can capture text in a label_text and make
layout decisions based on it, using the policy of global_dc's printer,
whilst within a call to diagnostic_show_locus. We can't print with
the pretty_printer itself within a call to diagnostic_show_locus since
it has partly-buffered content.
gcc/c-family/ChangeLog:
* c-pretty-print.c (c_pretty_printer::clone): New vfunc
implementation.
* c-pretty-print.h (c_pretty_printer::clone): New vfunc decl.
gcc/cp/ChangeLog:
* cxx-pretty-print.c (cxx_pretty_printer::clone): New vfunc
implementation.
* cxx-pretty-print.h (cxx_pretty_printer::clone): New vfunc decl.
* error.c (cxx_format_postprocessor::clone): New vfunc.
gcc/ChangeLog:
* pretty-print.c (pretty_printer::pretty_printer): New copy-ctor.
(pretty_printer::clone): New vfunc implementation.
* pretty-print.h (format_postprocessor::clone): New pure vfunc
decl.
(pretty_printer::pretty_printer): New copy-ctor decl.
(pretty_printer::clone): New vfunc decl.
From-SVN: r279244
This is used by new selftests in the analyzer patch kit.
gcc/ChangeLog:
* function-tests.c (selftest::make_fndecl): Make non-static.
* selftest.h (selftest::make_fndecl): New decl.
From-SVN: r279242
PR c++/92869
* class.c (finish_struct): For C++17 and earlier, check
type_has_user_provided_or_explicit_constructor rather than
TYPE_HAS_USER_CONSTRUCTOR whether to set CLASSTYPE_NON_AGGREGATE.
* g++.dg/cpp0x/aggr3.C: New test.
From-SVN: r279241
Ville pointed out that our paren init of aggregates doesn't work for
auto a = new A(1, 2, 3);
and I think it should:
A new-expression that creates an object of type T initializes that object
as follows:
...
-- Otherwise, the new-initializer is interpreted according to the
initialization rules of [dcl.init] for direct-initialization.
so I think it follows that we should perform dcl.init#17.6.2.2.
This doesn't work with new[]; we have:
error ("parenthesized initializer in array new");
* init.c (build_new_1): Handle parenthesized initialization of
aggregates in new-expression.
* g++.dg/cpp2a/paren-init20.C: New test.
From-SVN: r279240