* elf.c (elf_zstd_read_fse): Call elf_fetch_bits after reading
bits, not before. Add unlikely for error case.
(elf_zstd_offset_table): Regenerate.
(elf_zstd_read_huff): Clear 13 entries in weight_mark, not 12.
(elf_zstd_read_literals): For a single stream adjust by
total_streams_size, not compressed_size.
QNX uses sys/link.h rather than link.h for dl_iterate_phdr
Fixes https://github.com/ianlancetaylor/libbacktrace/issues/86
* configure.ac: Check for sys/link.h. Use either link.h or
sys/link.h when checking for dl_iterate_phdr.
* elf.c: Include sys/link.h if available.
* configure, config.h.in: Regenerate.
Patch from Rui Ueyama, who says:
libbacktrace occasionally fails to decompress compressed debug info
even though the sections contain valid zlib streams. The cause of the
issue is an off-by-one error.
If a zlib data block is a plain data (uncompressed data), the next two
bytes contain the size of the block. These two bytes value is byte-
aligned, so if we read-ahead more than 8 bits, we need to unread it.
So, the correct condition to determine whether or not we need to
unread a byte is bits >= 8 and not bits > 8. Due to this error,
if the last read bits happened to end at a byte boundary, the next
byte would be skipped. That caused the decompression failure.
This bug was originally reported against the mold linker.
rui314/mold#402
* elf.c (elf_zlib_inflate): Don't skip initial aligned byte in
uncompressed block.
Fix issues mentioned in the PR.
PR libbacktrace/103167
libbacktrace/ChangeLog:
* elf.c (elf_uncompress_lzma_block): Cast to unsigned int.
(elf_uncompress_lzma): Likewise.
* xztest.c (test_samples): memcpy only if v > 0.
Use an attribute rather than a comment when falling through a switch case.
* internal.h (ATTRIBUTE_FALLTHROUGH): Define.
* elf.c (elf_zlib_inflate): Use ATTRIBUTE_FALLTHROUGH.
* dwarf.c (struct attr): Add val field.
(enum attr_val_encoding): Add ATTR_VAL_ADDDRESS_INDEX,
ATTR_VAL_STRING_INDEX, ATTR_VAL_RNGLISTS_INDEX.
(struct line_header): Add addrsize field.
(struct line_header_format): Define.
(struct unit): Add str_offsets_base, addr_base, and rnglists_base
fields.
(read_uint24): New static function.
(read_attribute): Add implicit_val parameter. Replace dwarf_str
and dwarf_str_size parameters with dwarf_sections parameter. Add
support for new DWARF 5 forms. Change all callers.
(resolve_string): New static function.
(resolve_addr_index): Likewise.
(read_abbrevs): Support DW_FORM_implicit_const.
(struct pcrange): Add lowpc_is_addr_index, highpc_is_addr_Index,
and ranges_is_index fields.
(update_pcrange): Support DWARF 5 encodings.
(add_high_low_range): New static function, split out of
add_ranges.
(add_ranges_from_ranges): Likewise.
(add_ranges_from_rnglists): New static function.
(add_ranges): Just call new helper functions.
(find_address_ranges): Use resolve_string for strings, after
reading all attributes. Handle new DWARF 5 attributes.
(build_address_map): Support DWARF 5 compilation units.
(read_v2_paths): New static function, split out of
read_line_header.
(read_lnct): New static function.
(read_line_header_format_entries): Likewise.
(read_line_header): Add ddata parameter. Support DWARF 5 line
headers. Call new helper functions. Change all callers.
(read_line_program): Use addrsize from line program header. Don't
special case directory index 0 for DWARF 5.
(read_referenced_name): Use resolve_string.
(read_function_entry): Handle DWARF 5 encodings. Use
resolve_string.
* internal.h (enum dwarf_section): Add DEBUG_ADDR,
DEBUG_STR_OFFSETS, DEBUG_LINE_STR, DEBUG_RNGLISTS.
* elf.c (dwarf_section_names): Add new section names.
* pecoff.c (dwarf_section_names): Likewise.
* xcoff.c (xcoff_add): Clear dwarf_sections before setting
fields.
* configure.ac: Define HAVE_DWARF5 automake conditional.
* Makefile.am (dwarf5_SOURCES): New variable if HAVE_DWARF5.
(dwarf5_CFLAGS, dwarf5_LDADD): Likewise.
(dwarf5_alloc_SOURCES, dwarf5_alloc_CFLAGS): Likewise.
(dwarf5_alloc_LDADD): Likewise.
(BUILDTESTS): Add dwarf5 tests if HAVE_DWARF5.
(CLEANFILES, clean-local): Define.
From-SVN: r279380
The 'debugaltlink_name_len =+ 1' bug reported in PR89136 exposes the fact that
the build-id is not verified for the .gnu_debugaltlink.
Fix both problems.
2019-01-31 Tom de Vries <tdevries@suse.de>
PR libbacktrace/89136
* elf.c (elf_add): Read build-id if with_buildid_data. Fix
'debugaltlink_name_len =+ 1'.
From-SVN: r268419
Add test-cases b2test_buildid and b3test_dwz_buildid.
The last one triggers the segfault fixed by "[backtrace] Avoid segfault"
( r268275 ).
2019-01-29 Tom de Vries <tdevries@suse.de>
* install-debuginfo-for-buildid.sh.in: New script.
* Makefile.am (check_PROGRAMS): Add b2test and b3test.
(TESTS): Add b2test_buildid and b3test_dwz_buildid.
* Makefile.in: Regenerate.
* configure.ac (HAVE_ELF): Set with AM_CONDITIONAL.
(READELF): Set with AC_CHECK_PROG.
(install-debuginfo-for-buildid.sh): Generate with AC_CONFIG_FILES.
* configure: Regenerate.
* elf.c (SYSTEM_BUILD_ID_DIR): Factor out of ...
(elf_open_debugfile_by_buildid): ... here.
From-SVN: r268369
Currently, when running a libbacktrace testcase t with .gnu_debuglink to
t.debug, and t.debug having a .gnu_debugaltlink to t.alt.debug, a segfault
is triggered when calling strrchr with a NULL string from
elf_find_debugfile_by_debuglink. The NULL string originates from the elf_add
called for the .gnu_debugaltlink, which uses NULL as filename argument.
Fix this by using "" as filename argument instead.
2019-01-25 Tom de Vries <tdevries@suse.de>
* elf.c (elf_add): When handling .gnu_debugaltlink, call elf_add with
filename == "".
* Makefile.am (TESTS): Add btest_dwz_gnudebuglink.
* Makefile.in: Regenerate.
From-SVN: r268269
Add an altlink field to struct dwarf_data, and initialize it with the pointer
to the struct dwarf_data for the .gnu_debugaltlink.
2019-01-17 Tom de Vries <tdevries@suse.de>
* dwarf.c (struct dwarf_data): Add altlink field.
(backtrace_dwarf_add): Add and handle fileline_altlink parameter.
* elf.c (elf_add): Add argument to backtrace_dwarf_add call.
(phdr_callback, backtrace_initialize): Add argument to elf_add calls.
* internal.h (backtrace_dwarf_add): Add fileline_altlink parameter.
* pecoff.c (coff_add): Add argument to backtrace_dwarf_add call.
* xcoff.c (xcoff_add): Same.
From-SVN: r267994
Read the elf file pointed at by the .gnu_debugaltlink section, and verify that
the build id matches.
2019-01-17 Tom de Vries <tdevries@suse.de>
* elf.c (elf_add): Add and handle with_buildid_data and
with_buildid_size parameters. Handle .gnu_debugaltlink section.
(phdr_callback, backtrace_initialize): Add arguments to elf_add calls.
From-SVN: r267992
PR other/85161
* elf.c (elf_zlib_fetch): Fix up predefined macro names in test for
big endian, only use 32-bit loads if endianity macros are predefined
and indicate big or little endian.
From-SVN: r259096
PR other/82368
* elf.c (EM_PPC64, EF_PPC64_ABI): Undefine and define.
(struct elf_ppc64_opd_data): New type.
(elf_initialize_syminfo): Add opd argument, handle symbols
pointing into the PowerPC64 ELFv1 .opd section.
(elf_add): Read .opd section on PowerPC64 ELFv1, pass pointer
to structure with .opd data to elf_initialize_syminfo.
From-SVN: r257658
* elf.c (elf_add): Close descriptor if we use a debugfile.
* btest.c (check_open_files): New static function.
(main): Call check_open_files.
From-SVN: r257275
* elf.c (elf_open_debugfile_by_debuglink): Don't check CRC if the
desired CRC is zero.
(elf_add): Don't clear *found_sym and *found_dwarf if debuginfo.
From-SVN: r257062
* elf.c (codes) [GENERATE_FIXED_HUFFMAN_TABLE]: Fix size to be
288.
(main) [GENERATE_FIXED_HUFFMAN_TABLE]: Pass 288 to
elf_zlib_inflate_table. Generate elf_zlib_default_dist_table.
(elf_zlib_default_table): Update.
(elf_zlib_default_dist_table): New static array.
(elf_zlib_inflate): Use elf_zlib_default_dist_table for dist table
for block type 1.
* ztest.c (struct zlib_test): Add uncompressed_len.
(tests): Initialize uncompressed_len field. Add new test case.
(test_samples): Use uncompressed_len field.
From-SVN: r256776
* elf.c (elf_zlib_fetch): Change pval argument to uint64_t *.
Read a four byte integer.
(elf_zlib_inflate): Change val to uint64_t. Align pin to a 32-bit
boundary before ever calling elf_zlib_fetch.
* ztest.c (test_large): Simplify print statements a bit.
From-SVN: r253456
PR sanitizer/77631
* configure.ac: Check for lstat and readlink.
* elf.c (lstat, readlink): Provide dummy versions if real versions
are not available.
* configure, config.h.in: Rebuild.
From-SVN: r253095
* configure.ac: Check for XCOFF32/XCOFF64. Check for loadquery.
* filetype.awk: Separate AIX XCOFF32 and XCOFF64.
* xcoff.c: Add support for AIX XCOFF32 and XCOFF64 formats.
* configure, config.h.in: Regenerate.
From-SVN: r250590
* elf.c (backtrace_initialize): Always set *fileline_fn.
* ttest.c: New file.
* btest.c: Move support functions into testlib.c. Change calls to
check to pass file name.
* testlib.c: New file, copied from (part of) btest.c.
* testlib.h: New file, declarations for testlib.c.
* edtest.c: Use testlib.h and testlib.c.
* configure.ac: Test for -pthread, set HAVE_PTHREAD conditional.
* Makefile.am (btest_SOURCES): Add testlib.c.
(edtest_SOURCES): Likewise.
(CHECK_PROGRAMS): Add ttest if HAVE_PTHREAD.
(ttest_SOURCES, ttest_CFLAGS, ttest_LDADD): Define.
* configure, Makefile.in: Rebuild.
From-SVN: r249111
libbacktrace/
2016-03-02 Maxim Ostapenko <m.ostapenko@partner.samsung.com>
* elf.c (backtrace_initialize): Properly initialize elf_fileline_fn to
avoid possible crash.
(elf_add): Don't set *fileline_fn to elf_nodebug value in case of
missing debug info anymore.
From-SVN: r233911
PR 68115/libfortran
* configure.ac: Set libbacktrace_cv_sys_sync to no on hppa*-*-hpux*.
* configure: Regenerate.
* elf.c (backtrace_initialize): Cast __sync_bool_compare_and_swap call
to void.
From-SVN: r231485
