Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
ChangeLog:
* configure: Regenerate.
* configure.ac: Do not add default runpaths to GCC exes
when we are building -static-libstdc++/-static-libgcc (the
default).
* libtool.m4: Add 'enable-darwin-at-runpath'. Act on the
enable flag to alter Darwin libraries to use @rpath names.
gcc/ChangeLog:
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* config/darwin.h: Handle Darwin rpaths.
* config/darwin.opt: Handle Darwin rpaths.
* Makefile.in: Handle Darwin rpaths.
gcc/ada/ChangeLog:
* gcc-interface/Makefile.in: Handle Darwin rpaths.
gcc/jit/ChangeLog:
* Make-lang.in: Handle Darwin rpaths.
libatomic/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libbacktrace/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
libgcc/ChangeLog:
* config/t-slibgcc-darwin: Generate libgcc_s
with an @rpath name.
* config.host: Handle Darwin rpaths.
libgfortran/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libgm2/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libm2cor/Makefile.am: Handle Darwin rpaths.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.am: Handle Darwin rpaths.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.am: Handle Darwin rpaths.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.am: Handle Darwin rpaths.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.am: Handle Darwin rpaths.
* libm2pim/Makefile.in: Regenerate.
libgomp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libitm/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libobjc/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libdruntime/Makefile.am: Handle Darwin rpaths.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libquadmath/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libsanitizer/ChangeLog:
* asan/Makefile.am: Handle Darwin rpaths.
* asan/Makefile.in: Regenerate.
* configure: Regenerate.
* hwasan/Makefile.am: Handle Darwin rpaths.
* hwasan/Makefile.in: Regenerate.
* lsan/Makefile.am: Handle Darwin rpaths.
* lsan/Makefile.in: Regenerate.
* tsan/Makefile.am: Handle Darwin rpaths.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.am: Handle Darwin rpaths.
* ubsan/Makefile.in: Regenerate.
libssp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
lto-plugin/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
zlib/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
PR go/108057
The current version is the same as for the previous GCC release,
but there have been minor changes like new type descriptors that
make it impossible to run Go programs built with the previous GCC
release with the current libgo.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/456976
It turns out to be painful to require linking against -lrt on
GNU/Linux, as that makes it harder to link Go code into C programs.
Instead just call the timer syscalls directly. That is what the
upstream library does anyhow.
gcc/go/
* gospec.cc: Revert 2022-02-09 change:
(RTLIB, RT_LIBRARY): Don't define.
(lang_specific_driver): Don't add -lrt if linking statically
on GNU/Linux.
gotools/
* configure.ac: Revert 2022-02-09 change:
(RT_LIBS): Don't define.
* Makefile.am (check-runtime): Don't set GOLIBS to $(RT_LIBS).
* configure, Makefile.in: Regenerate.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/385475
Change-Id: I12766baf02bfdf2233f1c5bde1a270f06b020aa7
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/321076
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
This does not yet include support for the //go:embed directive added
in this release.
* Makefile.am (check-runtime): Don't create check-runtime-dir.
(mostlyclean-local): Don't remove check-runtime-dir.
(check-go-tool, check-vet): Copy in go.mod and modules.txt.
(check-cgo-test, check-carchive-test): Add go.mod file.
* Makefile.in: Regenerate.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/280172
Overhaul the mangling scheme to avoid ambiguities if the package path
contains a dot. Instead of using dot both to separate components and
to mangle characters, use dot only to separate components and use
underscore to mangle characters.
For golang/go#41862
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/271726
On NetBSD, for backwards compatibility, various libc symbols are
renamed to a symbol with a version suffix. For example, this is the
(abbreviated) definition of sigaction:
int sigaction(...) __asm__ ("__sigaction14")
This poses a challenge for libgo, which attempts to link sigaction by
way of an "//extern" comment:
//extern sigaction
func sigaction(...)
This results in a reference to the deprecated compatibility symbol
"sigaction", rather than the desired "__sigaction14" symbol.
This patch introduces a new "//extern-sysinfo" comment to handle this
situation. The new mklinknames.awk script scans a package for these
comments and outputs a "//go:linkname" directive that links the wrapper
to the correct versioned symbol, as determined by parsing the __asm__
annotation on the function's declaration in gen-sysinfo.go.
For now, only the following packages are scanned by mklinknames.awk:
os
os/user
runtime
syscall
gotools/:
* Makefile.am (check-runtime): Add runtime_linknames.go to
--extrafiles.
* Makefile.in: Regenerate.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/265125
The syscall package depends on many NetBSD-specific types on NetBSD.
Teach mksysinfo.sh to export these types.
This alone is not sufficient to get the syscall package to compile on
NetBSD, but it's a start.
Note that the IfMsgHdr type is recapitalized to IfMsghdr, which requires
changes in the AIX port. The new capitalization is what's used by
upstream in existing NetBSD-specific code and is more consistent with
the capitalization of other C structs with the "hdr" suffix.
Updates golang/go#38538.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/261739
AIX-style libraries contains both 32 and 64 bit shared objects.
This patch follows the adding of FAT libraries support in other gcc
libraries (libgcc, listdc++, etc).
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/242957
The C file has a build tag, but the procedure we use for building C
files ignores build tags.
This should fix the libgo build on non-x86 systems.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194378
From-SVN: r275544
Currently, goroutine switches are implemented with libc
getcontext/setcontext functions, which saves/restores the machine
register states and also the signal context. This does more than
what we need, and performs an expensive syscall.
This CL implements a simplified version of getcontext/setcontext,
in assembly, that only saves/restores the necessary part, i.e.
the callee-save registers, and the PC, SP. A simplified version
of makecontext, written in C, is also added. Currently this is
only implemented on Linux/AMD64.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/178298
From-SVN: r271818
PR go/89172
internal/cpu, runtime, runtime/pprof: handle function descriptors
When using PPC64 ELF ABI v1 a function address is not a PC, but is the
address of a function descriptor. The first field in the function
descriptor is the actual PC (see
http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#FUNC-DES).
The libbacktrace library knows about this, and libgo uses actual PC
values consistently except for the helper function funcPC that appears
in both runtime and runtime/pprof.
This patch fixes funcPC by recording, in the internal/cpu package,
whether function descriptors are being used. We have to check for
function descriptors using a C compiler check, because GCC can be
configured using --with-abi to select the ELF ABI to use.
Fixes https://gcc.gnu.org/PR89172
Reviewed-on: https://go-review.googlesource.com/c/162978
From-SVN: r269266
GCC has supported the __atomic intrinsics since 4.7. They are better
than the __sync intrinsics in that they specify a memory model and,
more importantly for our purposes, they are reliably implemented
either in the compiler or in libatomic.
Fixes https://gcc.gnu.org/PR52084
Reviewed-on: https://go-review.googlesource.com/c/160820
From-SVN: r268458
Reviewed-on: https://go-review.googlesource.com/c/158019
gotools/:
* Makefile.am (go_cmd_vet_files): Update for Go1.12beta2 release.
(GOTOOLS_TEST_TIMEOUT): Increase to 600.
(check-runtime): Export LD_LIBRARY_PATH before computing GOARCH
and GOOS.
(check-vet): Copy golang.org/x/tools into check-vet-dir.
* Makefile.in: Regenerate.
gcc/testsuite/:
* go.go-torture/execute/names-1.go: Stop using debug/xcoff, which
is no longer externally visible.
From-SVN: r268084
PR bootstrap/82856
libgo: update to autoconf 2.69 and automake 1.15.1
Initial patch from Joseph Myers.
Reviewed-on: https://go-review.googlesource.com/c/146417
From-SVN: r265701
This is enough to let libgo build when configured using
--with-multilib-list=m64,m32,mx32. I don't have an x32-enabled kernel
so I haven't tested whether it executes correctly.
For https://gcc.gnu.org/PR87470
Reviewed-on: https://go-review.googlesource.com/138817
From-SVN: r264772
PR go/84484
libgo: add support for riscv64
Patch by Andreas Schwab.
Reviewed-on: https://go-review.googlesource.com/96377
* go.test/go-test.exp (go-set-goarch): Recognize riscv64-*-*.
From-SVN: r257914
We were using special compilation flags for the math package, but we
weren't using them when testing. That meant that our tests were not
checking the real code we were providing. Fix that.
Fixing that revealed that we were not using a good set of flags, or at
least were not using flags that let the tests pass. Adjust the flags
to stop using -funsafe-math-optimizations on x86. Instead always use
-ffp-contract=off -fno-math-errno -fno-trapping-math for all targets.
Fixesgolang/go#23647
Reviewed-on: https://go-review.googlesource.com/91355
From-SVN: r257312
Move the architecture-specific settings out of configure.ac into a new
shell script goarch.sh. Use the new script to collect the values for
all architectures to make them available in go/types.
Also fix cmd/vet to pass the right compiler when it calls SizesFor.
This fixes cmd/vet for systems that are not implemented in the gc
toolchain, such as alpha and ia64.
Reviewed-on: https://go-review.googlesource.com/87635
From-SVN: r256655
