binutils-gdb modified for the FreeChainXenon project
Find a file
Maciej W. Rozycki 8a8c916960 LD/testsuite: run_dump_test: Report UNSUPPORTED for excluded targets
Bring the LD implementation of `run_dump_test' in line with its binutils
and GAS counterparts and report the UNSUPPORTED status for tests the run
of which has been prevented by means of one or more of `target',
`alltargets' and `notarget' tags.  Define `skip', `anyskip' and `noskip'
tags, which do not report anything for tests that are not run.

The rationale behind this is that we want to have unsupported tests
reported to ensure that they have actually been attempted and have not
been accidentally suppressed.  Then tests which have target-specific
variants that cannot be expressed with a single .d file can make use of
the newly added tags to silently suppress the uninteresting variants.

	ld/
	* testsuite/lib/ld-lib.exp (run_dump_test): Call `unsupported'
	if the target being tested has been excluded by means of one or
	more of `target', `alltargets' and `notarget' tags.  Add support
	for `skip', `anyskip' and `noskip' tags.
2018-07-09 15:50:57 +01:00
bfd bfd: Use changequote for "i[3-7]86-*-linux-*" 2018-07-09 06:51:17 -07:00
binutils Stop readelf from reporting gaps in the gnu build notes if the gap crosses a section boundary. 2018-07-06 13:52:59 +01:00
config Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
cpu PR22069, Several instances of register accidentally spelled as regsiter 2018-05-09 15:55:28 +09:30
elfcpp [GOLD] PowerPC .gnu.attributes support 2018-07-06 15:18:51 +09:30
etc Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
gas Fix the read/write flag for these registers on AArch64 2018-07-06 16:17:17 +01:00
gdb gdb/testsuite: Allow for failure to read some memory addresses 2018-07-09 15:08:20 +01:00
gold [GOLD] PowerPC .gnu.attributes support 2018-07-06 15:18:51 +09:30
gprof Fix use of "command line X" in binutils doc 2018-07-02 11:18:24 +01:00
include Fix diagnostic errors 2018-07-06 15:18:59 +09:30
intl Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
ld LD/testsuite: run_dump_test: Report UNSUPPORTED for excluded targets 2018-07-09 15:50:57 +01:00
libdecnumber Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
libiberty Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
opcodes S12Z/opcodes: Correct a `reg' global shadowing error for pre-4.8 GCC 2018-07-09 15:50:57 +01:00
readline Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
sim Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
texinfo
zlib Regen doc/Makefile.in 2018-06-21 23:00:05 +09:30
.cvsignore
.gitattributes Add a .gitattributes file for use with git-merge-changelog 2014-07-25 18:07:23 -04:00
.gitignore Add archives and make stamps to the .gitignore file. 2016-09-27 15:10:42 +01:00
ar-lib Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
ChangeLog Update config.sub 2018-07-06 08:23:40 +02:00
compile Update from upstream Automake 2014-11-16 13:43:48 +01:00
config-ml.in Update top level configure files by synchronizing them with gcc. 2018-01-10 15:29:21 +00:00
config.guess Update config.guess and config.sub 2018-07-05 13:35:19 +02:00
config.rpath
config.sub Update config.sub 2018-07-06 08:23:40 +02:00
configure Introduce @unless/@endunless and postbootstrap Makefile targets 2018-06-29 23:49:28 -03:00
configure.ac Introduce @unless/@endunless and postbootstrap Makefile targets 2018-06-29 23:49:28 -03:00
COPYING
COPYING.LIB
COPYING.LIBGLOSS Update the address of the FSF in the copyright notice of files which were using the old address. 2017-12-14 12:48:55 +00:00
COPYING.NEWLIB 2013-10-01 Jeff Johnston <jjohnstn@redhat.com> 2013-10-01 18:14:04 +00:00
COPYING3
COPYING3.LIB
depcomp Update from upstream Automake 2014-11-16 13:43:48 +01:00
djunpack.bat
install-sh Update from upstream Automake 2014-11-16 13:43:48 +01:00
libtool.m4 Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
ltgcc.m4
ltmain.sh PR target/59788 2014-02-06 11:01:57 +01:00
ltoptions.m4
ltsugar.m4
ltversion.m4
lt~obsolete.m4
MAINTAINERS Update description of ownership of files in include/ 2014-11-04 16:14:14 -08:00
Makefile.def This was already applied on the GCC side. 2018-06-19 00:05:40 +02:00
Makefile.in Introduce @unless/@endunless and postbootstrap Makefile targets 2018-06-29 23:49:28 -03:00
Makefile.tpl Introduce @unless/@endunless and postbootstrap Makefile targets 2018-06-29 23:49:28 -03:00
makefile.vms
missing Update from upstream Automake 2014-11-16 13:43:48 +01:00
mkdep
mkinstalldirs Update from upstream Automake 2014-11-16 13:43:48 +01:00
move-if-change Update `move-if-change' from gnulib 2014-11-16 17:04:02 +01:00
README
README-maintainer-mode Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
setup.com
src-release.sh Improve junk file removal in source tarball creation script. 2018-01-30 17:48:24 +00:00
symlink-tree
test-driver Bump to autoconf 2.69 and automake 1.15.1 2018-06-19 16:55:06 -04:00
ylwrap Update from upstream Automake 2014-11-16 13:43:48 +01:00

		   README for GNU development tools

This directory contains various GNU compilers, assemblers, linkers, 
debuggers, etc., plus their support routines, definitions, and documentation.

If you are receiving this as part of a GDB release, see the file gdb/README.
If with a binutils release, see binutils/README;  if with a libg++ release,
see libg++/README, etc.  That'll give you info about this
package -- supported targets, how to use it, how to report bugs, etc.

It is now possible to automatically configure and build a variety of
tools with one command.  To build all of the tools contained herein,
run the ``configure'' script here, e.g.:

	./configure 
	make

To install them (by default in /usr/local/bin, /usr/local/lib, etc),
then do:
	make install

(If the configure script can't determine your type of computer, give it
the name as an argument, for instance ``./configure sun4''.  You can
use the script ``config.sub'' to test whether a name is recognized; if
it is, config.sub translates it to a triplet specifying CPU, vendor,
and OS.)

If you have more than one compiler on your system, it is often best to
explicitly set CC in the environment before running configure, and to
also set CC when running make.  For example (assuming sh/bash/ksh):

	CC=gcc ./configure
	make

A similar example using csh:

	setenv CC gcc
	./configure
	make

Much of the code and documentation enclosed is copyright by
the Free Software Foundation, Inc.  See the file COPYING or
COPYING.LIB in the various directories, for a description of the
GNU General Public License terms under which you can copy the files.

REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info
on where and how to report problems.