This changes a few spots that use field_fmt to use field_core_addr
instead.
gdb/ChangeLog
2019-07-15 Tom Tromey <tromey@adacore.com>
* target.c (flash_erase_command): Use field_core_addr.
* symfile.c (generic_load): Use field_core_addr.
* sparc64-linux-tdep.c (sparc64_linux_handle_segmentation_fault):
Use field_core_addr.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Use
field_core_addr.
Both the i386, X86_64 and AArch64 builds of gdbserver include a bunch of legacy
xml files, dat files and auto generated C files, when building for unit test.
These tests exists back from when feature target descriptions were added to
prove that the new target descriptions were identical to the original
older versions. The old files are not used for anything other than these tests.
Now that this has been proven, we are not gaining anything by keeping the
original files and tests. Should new functionality be added, it would break
the tests, unless the functionality was backported to the xml. There is no
requirement that we must match the exact xml from N releases ago. It adds
obfuscation, where as the feature target descriptions were meant to simplify
the code.
In addition, there are a bunch of xml and dat files which are completely unused.
This patch removes the selftests and the target descriptions from gdbserver.
Update the unittest to allow 0 tests (note, this failed on other targets that
never had any tests).
gdb/ChangeLog:
* aarch64-tdep.c: Remove xml self tests.
* amd64-linux-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-tdep.c: Likewise.
gdb/gdbserver/ChangeLog:
* configure.srv: Remove legacy xml.
* linux-aarch64-low.c (initialize_low_arch): Remove
initialize_low_tdesc call.
* linux-aarch64-tdesc-selftest.c: Remove file.
* linux-aarch64-tdesc.h (initialize_low_tdesc): Remove.
* linux-x86-low.c (initialize_low_arch): Remove
initialize_low_tdesc call.
* linux-x86-tdesc-selftest.c: Remove file.
* linux-x86-tdesc.h (initialize_low_tdesc): Remove.
gdb/testsuite/ChangeLog:
* gdb.server/unittest.exp: Allow 0 unit tests to run.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
As on amd64, these registers hold the base address of the fs and gs
segments, respectively. For i386 these two registers are 32 bits.
gdb/ChangeLog:
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Update calls to i386_target_description to add 'segments'
parameter.
* amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't
add segment base registers.
* arch/i386.c (i386_create_target_description): Add 'segments'
parameter to enable segment base registers.
* arch/i386.h (i386_create_target_description): Likewise.
* features/i386/32bit-segments.xml: New file.
* features/i386/32bit-segments.c: Generate.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update
call to i386_target_description to add 'segments' parameter.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
* i386-go32-tdep.c (i386_go32_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_read_description): Likewise.
* i386-tdep.c (i386_validate_tdesc_p): Add segment base registers
if feature is present.
(i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs.
Add 'segments' parameter to call to i386_target_description.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
(_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter
to call to i386_target_description.
* i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'.
(enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM.
Define I386_NUM_REGS.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
gdb/gdbserver/ChangeLog:
* linux-x86-tdesc.c (i386_linux_read_description): Update call to
i386_create_target_description for 'segments' parameter.
* lynx-i386-low.c (lynx_i386_arch_setup): Likewise.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
* win32-i386-low.c (i386_arch_setup): Likewise.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
In the existing code, when using the regset section iteration functions, the
size parameter is used in different ways.
With collect, size is used to create the buffer in which to write the regset.
(see linux-tdep.c::linux_collect_regset_section_cb).
With supply, size is used to confirm the existing regset is the correct size.
If REGSET_VARIABLE_SIZE is set then the regset can be bigger than size.
Effectively, size is the minimum possible size of the regset.
(see corelow.c::get_core_register_section).
There are currently no targets with both REGSET_VARIABLE_SIZE and a collect
function.
In SVE, a corefile can contain one of two formats after the header, both of
which are different sizes. However, when writing a core file, we always want
to write out the full bigger size.
To allow support of collects for REGSET_VARIABLE_SIZE we need two sizes.
This is done by adding supply_size and collect_size.
gdb/
* aarch64-fbsd-tdep.c
(aarch64_fbsd_iterate_over_regset_sections): Add supply_size and
collect_size.
* aarch64-linux-tdep.c
(aarch64_linux_iterate_over_regset_sections): Likewise.
* alpha-linux-tdep.c
(alpha_linux_iterate_over_regset_sections):
* alpha-nbsd-tdep.c
(alphanbsd_iterate_over_regset_sections): Likewise.
* amd64-fbsd-tdep.c
(amd64fbsd_iterate_over_regset_sections): Likewise.
* amd64-linux-tdep.c
(amd64_linux_iterate_over_regset_sections): Likewise.
* arm-bsd-tdep.c
(armbsd_iterate_over_regset_sections): Likewise.
* arm-fbsd-tdep.c
(arm_fbsd_iterate_over_regset_sections): Likewise.
* arm-linux-tdep.c
(arm_linux_iterate_over_regset_sections): Likewise.
* corelow.c (get_core_registers_cb): Likewise.
(core_target::fetch_registers): Likewise.
* fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
* frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise.
* gdbarch.h (void): Regenerate.
* gdbarch.sh: Add supply_size and collect_size.
* hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise.
* hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise.
* hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise.
* i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise.
* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise.
* i386-tdep.c (i386_iterate_over_regset_sections): Likewise.
* ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise.
* linux-tdep.c (linux_collect_regset_section_cb): Likewise.
* m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise.
* m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise.
* m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise.
* mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise.
* mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise.
* mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections): Likewise.
* mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise.
* nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise.
* ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise.
* ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise.
* ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise.
* ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise.
* riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise.
* s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise.
* score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise.
* sh-tdep.c (sh_iterate_over_regset_sections): Likewise.
* sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise.
* tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise.
* vax-tdep.c (vax_iterate_over_regset_sections): Likewise.
* xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
displaced_step_closure is a type defined in multiple -tdep.c files.
Trying to xfree it from the common code (infrun.c) is a problem when we
try to poison xfree for non-POD types. Because there can be multiple of
these types in the same build, this patch makes a hierarchy of classes
with a virtual destructor. When the common code deletes the object
through a displaced_step_closure pointer, it will invoke the right
destructor.
The amd64 used a last-member array with a variable size. That doesn't
work with new, so I changed it for an std::vector. Other architectures
which used a simple byte buffer as a closure now use a shared
buf_displaced_step_closure, a closure type that only contains a
gdb::byte_vector.
Reg-tested on the buildbot.
gdb/ChangeLog:
* infrun.h: Include common/byte-vector.h.
(struct displaced_step_closure): New struct.
(struct buf_displaced_step_closure): New struct.
* infrun.c (displaced_step_closure::~displaced_step_closure):
Provide default implementation.
(displaced_step_clear): Deallocate step closure with delete.
* aarch64-tdep.c (displaced_step_closure): Rename to ...
(aarch64_displaced_step_closure): ... this, extend
displaced_step_closure.
(aarch64_displaced_step_data) <dsc>: Change type to
aarch64_displaced_step_closure.
(aarch64_displaced_step_copy_insn): Adjust to type change, use
unique_ptr.
(aarch64_displaced_step_fixup): Add cast for displaced step
closure.
* amd64-tdep.c (displaced_step_closure): Rename to ...
(amd64_displaced_step_closure): ... this, extend
displaced_step_closure.
<insn_buf>: Change type to std::vector<gdb_byte>.
<max_len>: Remove.
(fixup_riprel): Change type of DSC parameter, adjust to type
change of insn_buf.
(fixup_displaced_copy): Change type of DSC parameter.
(amd64_displaced_step_copy_insn): Instantiate
amd64_displaced_step_closure.
(amd64_displaced_step_fixup): Add cast for closure type, adjust
to type change of insn_buf.
* arm-linux-tdep.c (arm_linux_cleanup_svc): Change type of
parameter DSC.
(arm_linux_copy_svc): Likewise.
(cleanup_kernel_helper_return): Likewise.
(arm_catch_kernel_helper_return): Likewise.
(arm_linux_displaced_step_copy_insn): Instantiate
arm_displaced_step_closure.
* arm-tdep.c (arm_pc_is_thumb): Add cast for closure.
(displaced_read_reg): Change type of parameter DSC.
(branch_write_pc): Likewise.
(load_write_pc): Likewise.
(alu_write_pc): Likewise.
(displaced_write_reg): Likewise.
(arm_copy_unmodified): Likewise.
(thumb_copy_unmodified_32bit): Likewise.
(thumb_copy_unmodified_16bit): Likewise.
(cleanup_preload): Likewise.
(install_preload): Likewise.
(arm_copy_preload): Likewise.
(thumb2_copy_preload): Likewise.
(install_preload_reg): Likewise.
(arm_copy_preload_reg): Likewise.
(cleanup_copro_load_store): Likewise.
(install_copro_load_store): Likewise.
(arm_copy_copro_load_store) Likewise.
(thumb2_copy_copro_load_store): Likewise.
(cleanup_branch): Likewise.
(install_b_bl_blx): Likewise.
(arm_copy_b_bl_blx): Likewise.
(thumb2_copy_b_bl_blx): Likewise.
(thumb_copy_b): Likewise.
(install_bx_blx_reg): Likewise.
(arm_copy_bx_blx_reg): Likewise.
(thumb_copy_bx_blx_reg): Likewise.
(cleanup_alu_imm): Likewise.
(arm_copy_alu_imm): Likewise.
(thumb2_copy_alu_imm): Likewise.
(cleanup_alu_reg): Likewise.
(install_alu_reg): Likewise.
(arm_copy_alu_reg): Likewise.
(thumb_copy_alu_reg): Likewise.
(cleanup_alu_shifted_reg): Likewise.
(install_alu_shifted_reg): Likewise.
(arm_copy_alu_shifted_reg): Likewise.
(cleanup_load): Likewise.
(cleanup_store): Likewise.
(arm_copy_extra_ld_st): Likewise.
(install_load_store): Likewise.
(thumb2_copy_load_literal): Likewise.
(thumb2_copy_load_reg_imm): Likewise.
(arm_copy_ldr_str_ldrb_strb): Likewise.
(cleanup_block_load_all): Likewise.
(cleanup_block_store_pc): Likewise.
(cleanup_block_load_pc): Likewise.
(arm_copy_block_xfer): Likewise.
(thumb2_copy_block_xfer): Likewise.
(cleanup_svc): Likewise.
(install_svc): Likewise.
(arm_copy_svc): Likewise.
(thumb_copy_svc): Likewise.
(arm_copy_undef): Likewise.
(thumb_32bit_copy_undef): Likewise.
(arm_copy_unpred): Likewise.
(arm_decode_misc_memhint_neon): Likewise.
(arm_decode_unconditional): Likewise.
(arm_decode_miscellaneous): Likewise.
(arm_decode_dp_misc): Likewise.
(arm_decode_ld_st_word_ubyte): Likewise.
(arm_decode_media): Likewise.
(arm_decode_b_bl_ldmstm): Likewise.
(arm_decode_ext_reg_ld_st): Likewise.
(thumb2_decode_dp_shift_reg): Likewise.
(thumb2_decode_ext_reg_ld_st): Likewise.
(arm_decode_svc_copro): Likewise.
(thumb2_decode_svc_copro): Likewise.
(install_pc_relative): Likewise.
(thumb_copy_pc_relative_16bit): Likewise.
(thumb_decode_pc_relative_16bit): Likewise.
(thumb_copy_pc_relative_32bit): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_cbnz_cbz): Likewise.
(thumb2_copy_table_branch): Likewise.
(cleanup_pop_pc_16bit_all): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
(thumb_process_displaced_16bit_insn): Likewise.
(decode_thumb_32bit_ld_mem_hints): Likewise.
(thumb_process_displaced_32bit_insn): Likewise.
(thumb_process_displaced_insn): Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(arm_displaced_step_fixup): Add cast for closure.
* arm-tdep.h: Include infrun.h.
(displaced_step_closure): Rename to ...
(arm_displaced_step_closure): ... this, extend
displaced_step_closure.
<u::svc::copy_svc_os>: Change type of parameter DSC.
<cleanup>: Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(displaced_read_reg): Likewise.
(displaced_write_reg): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn):
Adjust.
* i386-tdep.h: Include infrun.h.
(i386_displaced_step_closure): New typedef.
* i386-tdep.c (i386_displaced_step_copy_insn): Use
i386_displaced_step_closure.
(i386_displaced_step_fixup): Adjust.
* rs6000-tdep.c (ppc_displaced_step_closure): New typedef.
(ppc_displaced_step_copy_insn): Use ppc_displaced_step_closure
and unique_ptr.
(ppc_displaced_step_fixup): Adjust.
* s390-linux-tdep.c (s390_displaced_step_closure): New typedef.
(s390_displaced_step_copy_insn): Use s390_displaced_step_closure
and unique_ptr.
(s390_displaced_step_fixup): Adjust.
The code on creating i386-linux target descriptions are quite similar
between GDB and GDBserver, so this patch moves them into a shared file
arch/i386.c. I didn't name it as i386-linux.c, because I want to reuse it
to create other i386 non-linux target descriptions later.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Add i386.o.
(SFILES): Add arch/i386.c.
(HFILES_NO_SRCDIR): Add arch/i386.h.
* arch/i386.c: New file.
* arch/i386.h: New file.
* arch/tdesc.h (allocate_target_description): Declare.
(set_tdesc_architecture): Declare.
(set_tdesc_osabi): Declare.
* configure.tgt (i[34567]86-*-linux*): Add i386.o.
* i386-linux-tdep.c: Don't include ../features/i386/32bit-XXX.c.
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
(set_tdesc_architecture): New function.
(set_tdesc_osabi): New function.
* target-descriptions.h (allocate_target_description): Remove.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (arch-i386.o): New rule.
* configure.srv (i[34567]86-*-linux*): Add arch-i386.o.
(x86_64-*-linux*): Likewise.
* linux-x86-tdesc.c: Don't include ../features/i386/32bit-XXX.c,
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
* tdesc.c (allocate_target_description): New function.
* tdesc.h (set_tdesc_architecture): Remove declaration.
(set_tdesc_osabi): Likewise.
tdesc_i386_XXX_linux is used in many places in linux-x86-low.c and this
patch adds a new function i386_linux_read_description to return the right
tdesc according to xcr0. i386_linux_read_description is quite similar to
the counterpart in GDB, and the following patch will share the duplicated
code, so this patch adds arch/tdesc.h includes the declarations of various
tdesc apis which are used by the shared code. The generated c feature
files can include arch/tdesc.h only.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* configure.srv (srv_tgtobj): Append linux-x86-tdesc.o.
(ipa_obj): Likewise.
* linux-i386-ipa.c: Include common/x86-xstate.h
(get_ipa_tdesc): Call i386_linux_read_description.
(initialize_low_tracepoint): Don't call init_registers_XXX
functions, call initialize_low_tdesc instead.
* linux-x86-low.c (x86_linux_read_description): Call
i386_linux_read_description.
(initialize_low_arch): Don't call init_registers_i386_XXX
functions, call initialize_low_tdesc.
* linux-x86-tdesc.c: New file.
* linux-x86-tdesc.h (x86_linux_tdesc): New X86_TDESC_LAST.
(i386_get_ipa_tdesc_idx): Declare.
(i386_get_ipa_tdesc): Declare.
(initialize_low_tdesc): Declare.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* arch/tdesc.h: New file.
* regformats/regdat.sh: Generate code using tdesc_create_reg.
* target-descriptions.c: Update comments.
* target-descriptions.h: Include "arch/tdesc.h". Remove the
declarations.
* features/i386/32bit-avx.c: Re-generated.
* features/i386/32bit-avx512.c: Re-generated.
* features/i386/32bit-core.c: Re-generated.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-mpx.c: Re-generated.
* features/i386/32bit-pkeys.c: Re-generated.
* features/i386/32bit-sse.c: Re-generated.
As an update to commit ede5f15146 ("gdbarch.h: Change
gdbarch_info::tdep_info's type to void *") replace the definition of the
`tdep_info' member in `struct gdbarch_info' with an anonymous union,
comprising the original member, with its type reverted to `struct
gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data
*' type and an `id' member of an `int *' type. Remove now unnecessary
casts throughout use places then, making code easier to read an less
prone to errors, which may happen with casting.
gdb/
* gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with
a union of `tdep_info', `tdesc_data' and `id'.
* aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data'
rather than `info.tdep_info'.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_gdbarch_init): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than
`info.tdep_info'.
(ppc_linux_init_abi): Use `info.tdesc_data' rather than
`info.tdep_info'.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Use `info.id' rather than
`info.tdep_info'.
* spu-tdep.c (spu_gdbarch_init): Likewise.
* gdbarch.h: Regenerate.
Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions. These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).
This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.
gdb/testsuite:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".
gdb/doc:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".
Instead of using pre-generated target descriptions, this patch
changes GDB to lazily and dynamically create target descriptions
according to the target hardware capability (xcr0 in i386).
This support any combination of target features.
Some reg in target description has "regnum" attribute, so its register
number is got from the attribute value instead from sequential allocation.
<reg name="xmm0" bitsize="128" type="vec128" regnum="32"/>
when target description is created, it should match the regnum, so this
patch adds a new field m_next_regnum to track it, if attribute number is
greater than the m_next_regnum, print the code to set register number
explicitly.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* i386-linux-tdep.c: Don't include features/i386/i386-*linux.c.
Include features/i386/32bit-*.c.
(i386_linux_read_description): Generate target description if it
doesn't exist.
(_initialize_i386_linux_tdep): Don't call _initialize_tdesc_i386
functions.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-sse.c: Likewise.
* target-descriptions.c (print_c_feature::visit): Print code to
set register number if needed.
(print_c_feature) <m_next_regnum>: New field.
This patch moves all the tdesc_i386*_linux target descriptions to a
function i386_linux_read_description, which returns the right target
description according to xcr0. This also remove the duplication in
getting target descriptions in corefile and native target.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* i386-linux-tdep.c (i386_linux_read_description): New function.
(i386_linux_core_read_description): Call
i386_linux_read_description.
* i386-linux-tdep.h (i386_linux_read_description): Declare.
(tdesc_i386_linux, tdesc_i386_mmx_linux): Remove declarations.
(tdesc_i386_avx_linux, tdesc_i386_mpx_linux): Likewise
(tdesc_i386_avx_mpx_linux, tdesc_i386_avx_avx512_linux): Likewise.
(tdesc_i386_avx_mpx_avx512_pku_linux): Likewise.
* x86-linux-nat.c (x86_linux_read_description): Call
i386_linux_read_description.
The displaced_step_free_closure gdbarch hook allows architectures to
free data they might have allocated to complete a displaced step.
However, all architectures using that hook use the
simple_displaced_step_free_closure provided in arch-utils.{c,h}, which
does a simple xfree. We can remove it and do an xfree directly instead
of calling the hook.
gdb/ChangeLog:
* gdbarch.sh (displaced_step_free_closure): Remove.
* gdbarch.h, gdbarch.c: Re-generate.
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't set
displaced_step_free_closure.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* arch-utils.h (simple_displaced_step_free_closure): Remove.
* arch-utils.c (simple_displaced_step_free_closure): Remove.
* infrun.c (displaced_step_clear): Call xfree instead of
gdbarch_displaced_step_free_closure.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
New include.
(amd64_linux_core_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
* amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
* amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
(amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
* common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
(X86_XSTATE_AVX_MPX_MASK): New case.
* features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
(i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
(i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
(i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
New expedites.
* i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
include.
(i386_linux_core_read_description): Add case
X86_XSTATE_AVX_MPX_MASK.
(_initialize_i386_linux_tdep): Call
initialize_tdesc_i386_avx_mpx_linux.
* i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
* i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
(i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
* x86-linux-nat.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
* features/i386/amd64-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx-linux.c: Generated.
* features/i386/amd64-avx-mpx.c: Generated.
* features/i386/i386-avx-mpx-linux.c: Generated.
* features/i386/i386-avx-mpx.c: Generated.
* regformats/i386/amd64-avx-mpx-linux.dat: Generated.
* regformats/i386/amd64-avx-mpx.dat: Generated.
* regformats/i386/i386-avx-mpx-linux.dat: Generated.
* regformats/i386/i386-avx-mpx.dat: Generated.
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Add removal for i386-avx-mpx.c,
i386-avx-mpx-linux.c, amd64-avx-mpx.c and amd64-avx-mpx-linux.c.
(i386-avx-mpx.c, i386-avx-mpx-linux.c, amd64-avx-mpx.c)
(amd64-avx-mpx-linux.c): New rules.
(amd64-avx-mpx-linux-ipa.o, i386-avx-mpx-linux-ipa.o): New rule.
* configure.srv (srv_i386_regobj): Add i386-avx-mpx.o.
(srv_i386_linux_regobj): Add i386-avx-mpx-linux.o.
(srv_amd64_regobj): Add amd64-avx-mpx.o.
(srv_amd64_linux_regobj): Add amd64-avx-mpx-linux.o.
(srv_i386_xmlfiles): Add i386/i386-avx-mpx.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx-mpx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-mpx-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-mpx-linux.xml.
(ipa_i386_linux_regobj): Add i386-avx-mpx-linux-ipa.o.
(ipa_amd64_linux_regobj): Add amd64-avx-mpx-linux-ipa.o.
* linux-x86-low.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(x86_get_ipa_tdesc_idx): Add cases for avx_mpx.
(initialize_low_arch): Call init_registers_amd64_avx_mpx_linux and
init_registers_i386_avx_mpx_linux.
* linux-i386-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_i386_avx_mpx_linux.
* linux-amd64-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_amd64_avx_mpx_linux.
* linux-x86-tdesc.h (X86_TDESC_AVX_MPX): New enum value.
(init_registers_amd64_avx_mpx_linux, tdesc_amd64_avx_mpx_linux)
(init_registers_i386_avx_mpx_linux, tdesc_i386_avx_mpx_linux): New
declarations.
We see this error when building with gcc 4.3.
../../gdb/i386-linux-tdep.c: In function ‘i386_linux_handle_segmentation_fault’:
../../gdb/i386-linux-tdep.c:399: error: ‘access’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘upper_bound’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘lower_bound’ may be used uninitialized in this function
It's a false positive, since the variables will always get initialized
in the TRY clause, and the CATCH returns.
gdb/ChangeLog:
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
Initialize variables.
With Intel Memory Protection Extensions it was introduced the concept of
boundary violation. A boundary violations is presented to the inferior as
a segmentation fault having SIGCODE 3. This patch adds a
handler for a boundary violation extending the information displayed
when a bound violation is presented to the inferior. In the stop mode
case the debugger will also display the kind of violation: "upper" or
"lower", bounds and the address accessed.
On no stop mode the information will still remain unchanged. Additional
information about bound violations are not meaningful in that case user
does not know the line in which violation occurred as well.
When the segmentation fault handler is stop mode the out puts will be
changed as exemplified below.
The usual output of a segfault is:
Program received signal SIGSEGV, Segmentation fault
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In case it is a bound violation it will be presented as:
Program received signal SIGSEGV, Segmentation fault
Upper bound violation while accessing address 0x7fffffffc3b3
Bounds: [lower = 0x7fffffffc390, upper = 0x7fffffffc3a3]
0x0000000000400d7c in upper (p=0x603010, a=0x603030, b=0x603050,
c=0x603070, d=0x603090, len=7) at i386-mpx-sigsegv.c:68
68 value = *(p + len);
In mi mode the output of a segfault is:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault", frame={addr="0x0000000000400d7c",
func="upper",args=[{name="p", value="0x603010"},{name="a",value="0x603030"}
,{name="b",value="0x603050"}, {name="c",value="0x603070"},
{name="d",value="0x603090"},{name="len",value="7"}],
file="i386-mpx-sigsegv.c",fullname="i386-mpx-sigsegv.c",line="68"},
thread-id="1",stopped-threads="all",core="6"
in the case of a bound violation:
*stopped,reason="signal-received",signal-name="SIGSEGV",
signal-meaning="Segmentation fault",
sigcode-meaning="Upper bound violation",
lower-bound="0x603010",upper-bound="0x603023",bound-access="0x60302f",
frame={addr="0x0000000000400d7c",func="upper",args=[{name="p",
value="0x603010"},{name="a",value="0x603030"},{name="b",value="0x603050"},
{name="c",value="0x603070"},{name="d",value="0x603090"},
{name="len",value="7"}],file="i386-mpx-sigsegv.c",
fullname="i386-mpx-sigsegv.c",line="68"},thread-id="1",
stopped-threads="all",core="6"
2016-02-18 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* NEWS: Add entry for bound violation.
* amd64-linux-tdep.c (amd64_linux_init_abi_common):
Add handler for segmentation fault.
* gdbarch.sh (handle_segmentation_fault): New.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
(SIG_CODE_BONDARY_FAULT): New define.
(i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
* i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* i386-tdep.c (i386_mpx_enabled): Add as external.
* infrun.c (handle_segmentation_fault): New function.
(print_signal_received_reason): Use handle_segmentation_fault.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-mpx-sigsegv.c: New file.
* gdb.arch/i386-mpx-sigsegv.exp: New file.
* gdb.arch/i386-mpx-simple_segv.c: New file.
* gdb.arch/i386-mpx-simple_segv.exp: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Signals): Add bound violation display hints for
a SIGSEGV.
Use linux_get_siginfo_type_with_fields for adding bound fields on
segmentation fault for i386/amd64 siginfo.
2016-02-02 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
* linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
* i386-linux-tdep.h (x86_linux_get_siginfo_type): New
function.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
x86_linux_get_siginfo_type for the amd64 abi.
* i386-linux-tdep.c (x86_linux_get_siginfo_type): New
function.
(i386_linux_init_abi): Add new function at the i386 ABI
initialization.
getdents buffer size is given in bytes, not dirent entries (which have
variable size anyway). We don't need size_dirent and size_dirent64 for
this reason.
readdir, on the other hand, needs size of old_linux_dirent, which is
a somewhat different structure. Accordingly, rename size_dirent
to size_old_dirent.
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Remove
size_dirent{,64}, add size_old_dirent.
* amd64-linux-tdep.c (amd64_linux_init_abi): Remove size_dirent{,64},
add size_old_dirent.
(amd64_x32_linux_init_abi): Remove size_dirent{,64}, add
size_old_dirent.
* arm-linux-tdep.c (arm_linux_init_abi): Remove size_dirent{,64},
add size_old_dirent.
* i386-linux-tdep.c (i386_linux_init_abi): Remove size_dirent{,64},
add size_old_dirent.
* linux-record.c (record_linux_system_call): Fix handling of readdir
and getdents{,64}.
* linux-record.h (struct linux_record_tdep): Remove size_dirent{,64},
add size_old_dirent.
* ppc-linux-tdep.c (ppc_init_linux_record_tdep): Remove
size_dirent{,64}, add size_old_dirent.
i386 and arm wrongly set them to 2, when it should be 4. size_[ug]id is used
by getgroups32 etc syscalls, while size_old_[ug]id is used for getgroups16
and friends.
gdb/ChangeLog:
* arm-linux-tdep.c (arm_linux_init_abi): Fix size_[ug]id.
* i386-linux-tdep.c (i386_linux_init_abi): Fix size_[ug]id.
This patch is mostly extracted from Pedro's C++ branch. It adds explicit
casts from integer to enum types, where it is really the intention to do
so. This could be because we are ...
* iterating on enum values (we need to iterate on an equivalent integer)
* converting from a value read from bytes (dwarf attribute, agent
expression opcode) to the equivalent enum
* reading the equivalent integer value from another language (Python/Guile)
An exception to that is the casts in regcache.c. It seems to me like
struct regcache's register_status field could be a pointer to an array of
enum register_status. Doing so would waste a bit of memory (4 bytes
used by the enum vs 1 byte used by the current signed char, for each
register). If we switch to C++11 one day, we can define the underlying
type of an enum type, so we could have the best of both worlds.
gdb/ChangeLog:
* arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
(arm_set_abi): Likewise.
* ax-general.c (ax_print): Likewise.
* c-exp.y (exp : string_exp): Likewise.
* compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
(do_compile_dwarf_expr_to_c): Likewise.
* cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
Likewise.
* dwarf2expr.c (execute_stack_op): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
(disassemble_dwarf_expression): Likewise.
* dwarf2read.c (dwarf2_add_member_fn): Likewise.
(read_array_order): Likewise.
(abbrev_table_read_table): Likewise.
(read_attribute_value): Likewise.
(skip_unknown_opcode): Likewise.
(dwarf_decode_macro_bytes): Likewise.
(dwarf_decode_macros): Likewise.
* eval.c (value_f90_subarray): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* infrun.c (handle_command): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
* osabi.c (set_osabi): Likewise.
* parse.c (operator_length_standard): Likewise.
* ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
single return point.
* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
(gdbpy_lookup_global_symbol): Likewise.
* record-full.c (record_full_restore): Likewise.
* regcache.c (regcache_register_status): Likewise.
(regcache_raw_read): Likewise.
(regcache_cooked_read): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* symtab.c (initialize_ordinary_address_classes): Likewise.
* target-debug.h (target_debug_print_signals): Likewise.
* utils.c (do_restore_current_language): Likewise.
linux_get_siginfo_type is installed to many linux gdbarch. This patch
is to move this to a common area linux-tdep.c:linux_init_abi, so that
linux_get_siginfo_type is installed to every linux gdbarch. If some
linux gdbarch needs its own version, please override it in
$ARCH_linux_init_abi. In the testsuite, we enable siginfo related
tests for all linux targets.
gdb:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
set_gdbarch_get_siginfo_type.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
* linux-tdep.c (linux_get_siginfo_type): Change it to static.
(linux_init_abi): Call set_gdbarch_get_siginfo_type.
* linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
gdb/testsuite:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): Return 1 for all
linux targets.
stdint.h was added to common-defs.h some months ago and should
no longer be included directly by any file.
gdb_assert.h was added to common-defs.h nearly a year ago, but
three includes have crept in since then.
This commit removes all such redundant include directives.
gdb/ChangeLog:
* common/buffer.c (stdint.h): Do not include.
* common/print-utils.c (stdint.h): Likewise.
* compile/compile-c-symbols.c (gdb_assert.h): Likewise.
* compile/compile-c-types.c (gdb_assert.h): Likewise.
* ft32-tdep.c (gdb_assert.h): Likewise.
* guile/scm-utils.c (stdint.h): Likewise.
* i386-linux-tdep.c (stdint.h): Likewise.
* i386-tdep.c (stdint.h): Likewise.
* nat/linux-btrace.c (stdint.h): Likewise.
* nat/linux-btrace.h (stdint.h): Likewise.
* nat/linux-ptrace.c (stdint.h): Likewise.
* nat/mips-linux-watch.h (stdint.h): Likewise.
* ppc-linux-nat.c (stdint.h): Likewise.
* python/python-internal.h (stdint.h): Likewise.
* stub-termcap.c (stdlib.h): Likewise.
* target/target.h (stdint.h): Likewise.
* xtensa-linux-nat.c (stdint.h): Likewise.
gdb/gdbserver/ChangeLog:
* linux-i386-ipa.c (stdint.h): Do not include.
* lynx-i386-low.c (stdint.h): Likewise.
* lynx-ppc-low.c (stdint.h): Likewise.
* mem-break.c (stdint.h): Likewise.
* thread-db.c (stdint.h): Likewise.
* tracepoint.c (stdint.h): Likewise.
* win32-low.c (stdint.h): Likewise.
Running break-interp.exp with the target always in non-stop mode trips
on PR13858, as enabling non-stop also enables displaced stepping.
The problem is that when GDB doesn't know where the entry point is, it
doesn't know where to put the displaced stepping scratch pad. The
test added by this commit exercises this. Without the fix, we get:
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: break *$pc
set displaced-stepping on
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: set displaced-stepping on
stepi
0x00000000004005be in ?? ()
Entry point address is not known.
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: stepi
p /x $pc
$2 = 0x4005be
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: get after PC
FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
The fix switches all GNU/Linux ports to get the entry point from
AT_ENTRY in the target auxiliary vector instead of from symbols. This
is currently only done by PPC when Cell debugging is enabled, but I
think all archs should be able to do the same. Note that
ppc_linux_displaced_step_location cached the result, I'm guessing to
avoid constantly re-fetching the auxv out of remote targets, but
that's no longer necessary nowadays, as the auxv blob is itself cached
in the inferior object. The ppc_linux_entry_point_addr global is
obviously bad for multi-process too nowadays.
Tested on x86-64 (-m64/-m32), PPC64 (-m64/-m32) and S/390 GNU/Linux.
Yao tested the new test on ARM as well.
gdb/ChangeLog:
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/13858
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
linux_displaced_step_location as gdbarch_displaced_step_location
hook.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* linux-tdep.c (linux_displaced_step_location): New function,
based on ppc_linux_displaced_step_location.
* linux-tdep.h (linux_displaced_step_location): New declaration.
* ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
(ppc_linux_inferior_created, ppc_linux_displaced_step_location):
Delete.
(ppc_linux_init_abi): Install linux_displaced_step_location as
gdbarch_displaced_step_location hook, even without Cell/B.E..
(_initialize_ppc_linux_tdep): Don't install
ppc_linux_inferior_created as inferior_created observer.
* s390-linux-tdep.c (s390_gdbarch_init): Install
linux_displaced_step_location as gdbarch_displaced_step_location
hook.
gdb/testsuite/
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/13858
* gdb.base/step-over-no-symbols.exp: New file.
When reading the XSAVE extended state from an i386 or AMD64 core file,
the respective regset iterator requests a minimum section size of
zero. Since the respective regset supply function does not check the
size either, this may lead to accessing data out of range if the
section is too short.
In write mode, the iterator always uses the maximum supported size for
the XSAVE extended state.
This is now changed such that the iterator always requests the
expected size of this section based on xcr0, both for reading and
writing.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
For ".reg-xstate", explicitly specify the requested section size
via X86_XSTATE_SIZE instead of just 0 on input and
X86_XSTATE_MAX_SIZE on output.
* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
Likewise.
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
This adds the 'regset' parameter to the iterator callback.
Consequently the 'regset_from_core_section' method is dropped for all
targets that provide the iterator method.
This change prepares for replacing regset_from_core_section
everywhere, thereby eliminating one gdbarch interface. Since the
iterator is usually no more complex than regset_from_core_section
alone, targets that previously didn't define core_regset_sections will
then gain multi-arch capable core file generation support without
increased complexity.
gdb/ChangeLog:
* gdbarch.sh (iterate_over_regset_sections_cb): Add regset
parameter.
* gdbarch.h: Regenerate.
* corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset
iterator.
(get_core_register_section): Add parameter 'regset' and use it, if
set. Add parameter 'min_size' and verify the bfd section size
against it.
(get_core_registers_cb): Add parameter 'regset' and pass it to
get_core_register section. For the "standard" register sections
".reg" and ".reg2", set an appropriate default for human_name.
(get_core_registers): Don't abort when the gdbarch has an iterator
but no regset_from_core_section. Add NULL/0 for parameters
'regset'/'min_size' in calls to get_core_register_section.
* linux-tdep.c (linux_collect_regset_section_cb): Add parameter
'regset' and use it instead of calling the
regset_from_core_section gdbarch method.
* i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'.
* i386-tdep.c (i386_supply_xstateregset)
(i386_collect_xstateregset, i386_xstateregset): Moved to
i386-linux-tdep.c.
(i386_regset_from_core_section): Drop handling for .reg-xfp and
.reg-xstate.
(i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic
core file support only if the regset iterator hasn't been set.
* i386-linux-tdep.c (i386_linux_supply_xstateregset)
(i386_linux_collect_xstateregset, i386_linux_xstateregset): New.
Moved from i386-tdep.c and renamed to *_linux*.
(i386_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation. Allow any .reg-xstate size when reading
from a core file.
* amd64-tdep.c (amd64_supply_xstateregset)
(amd64_collect_xstateregset, amd64_xstateregset): Moved to
amd64-linux-tdep.c.
(amd64_regset_from_core_section): Remove.
(amd64_init_abi): Set new tdep field 'fpregset'. No longer
install an amd64-specific regset_from_core_section gdbarch method.
* amd64-linux-tdep.c (amd64_linux_supply_xstateregset)
(amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New.
Moved from amd64-tdep.c and renamed to *_linux*.
(amd64_linux_iterate_over_regset_sections): Add regset parameter
to each callback invocation. Allow any .reg-xstate size when
reading from a core file.
* arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove.
(arm_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(arm_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove.
(ppc_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(ppc_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields
gregset, sizeof_gregset, fpregset, and sizeof_fpregset.
(s390_regset_from_core_section): Remove.
(s390_iterate_over_regset_sections): Add regset parameter to each
callback invocation.
(s390_gdbarch_init): No longer set the regset_from_core_section
gdbarch method. Drop initialization of deleted tdep fields.
The core_regset_sections list in gdbarch (needed for multi-arch
capable core file generation support) is replaced by an iterator
method. Overall, this reduces the code a bit, and it allows for more
flexibility.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_regset_sections): Remove.
(amd64_linux_iterate_over_regset_sections): New.
(amd64_linux_init_abi_common): Don't install the regset section
list, but the new iterator in gdbarch.
* arm-linux-tdep.c (arm_linux_fpa_regset_sections)
(arm_linux_vfp_regset_sections): Remove. Move combined logic...
(arm_linux_iterate_over_regset_sections): ...here. New function.
(arm_linux_init_abi): Set iterator instead of section list.
* corelow.c (get_core_registers_cb): New function, logic moved
from...
(get_core_registers): ...loop body here. Use new iterator method
instead of walking through the regset section list.
* gdbarch.sh: Remove 'core_regset_sections'. New method
'iterate_over_regset_sections'. New typedef
'iterate_over_regset_sections_cb'.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* i386-linux-tdep.c (i386_linux_regset_sections)
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
Remove.
(i386_linux_iterate_over_regset_sections): New.
(i386_linux_init_abi): Don't choose a regset section list, but
install new iterator in gdbarch.
* linux-tdep.c (struct linux_collect_regset_section_cb_data): New.
(linux_collect_regset_section_cb): New function, logic moved
from...
(linux_collect_thread_registers): ...loop body here. Use iterator
method instead of walking through list.
(linux_make_corefile_notes_1): Check for presence of iterator
method instead of regset section list.
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections)
(ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections)
(ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections)
(ppc64_linux_fp_regset_sections): Remove. Move combined logic...
(ppc_linux_iterate_over_regset_sections): ...here. New function.
(ppc_linux_init_abi): Don't choose from above regset section
lists, but install new iterator in gdbarch.
* regset.h (struct core_regset_section): Remove.
* s390-linux-tdep.c (struct gdbarch_tdep): Add new fields
have_linux_v1, have_linux_v2, and have_tdb.
(s390_linux32_regset_sections, s390_linux32v1_regset_sections)
(s390_linux32v2_regset_sections, s390_linux64_regset_sections)
(s390_linux64v1_regset_sections, s390_linux64v2_regset_sections)
(s390x_linux64_regset_sections, s390x_linux64v1_regset_sections)
(s390x_linux64v2_regset_sections): Remove. Move combined logic...
(s390_iterate_over_regset_sections): ...here. New function. Use
new tdep fields.
(s390_gdbarch_init): Set new tdep fields. Don't choose from above
regset section lists, but install new iterator.
Tom Tromey