AMX-TILE is a prereq to these, as already correctly expressed by
CPU_ANY_AMX_TILE_FLAGS. Express the dependency also in the reverse
("positive") direction.
Omitting predicate size specifier in vector form of {sq, uq, }{decp, incp} is deprecated and will be prohibited in a future release of the aarch64,
see https://developer.arm.com/documentation/ddi0602/2021-09/SVE-Instructions/DECP--vector---Decrement-vector-by-count-of-true-predicate-elements-.
This allows explicit size specifier, e.g. `decp z0.h, p0.h`, for predicate operand of these SVE instructions.
The existing behaviour of not requiring the specifier is preserved.
And the disasembly is with the specifier with this patch.
The GAS tests passed under our local tests.
opcodes/
* aarch64-asm.c: Modify `sve_size_hsd` encoding.
* aarch64-tbl.h (aarch64_opcode_table): Add QUALS's type OP_SVE_Vv_HSD
for decp, incp, sqdecp, sqincp, uqdecp and uqincp.
gas/
* testsuite/gas/aarch64/sve-movprfx_23.s: Update movprfx_23 testcase's
test_sametwo macro, where take the predicate size specifier.
* testsuite/gas/aarch64/sve-movprfx_23.d: Update movprfx_23 testcase's
expected disassembly.
* testsuite/gas/aarch64/sve-movprfx_23.l: Update movprfx_23 testcase's
expected assembler messages.
* testsuite/gas/aarch64/sve.s: Add sve testcase's instructions for
decp, incp, sqdecp, sqincp, uqdecp and uqincp, which take the
predicate size specifier.
* testsuite/gas/aarch64/sve.d: Update sve testcase's expected
disassembly.
Signed-off-by: CaiJingtao <caijingtao@huawei.com>
Current F_STRICT qualifier checking is enforced after the fact
rather than as part of the match. This makes it impossible to
have, e.g.:
QLF2(S_D, S_D)
QLF2(S_D, NIL)
in the same list.
opcodes/
* aarch64-opc.c (aarch64_find_best_match): Handle F_STRICT here
rather than...
(match_operands_qualifier): ...here.
These require EVEX.W=0. Use %XS to facilitate the checking, even if for
the AVX512_4VNNIW ones this is kind of an abuse (as 's' there stands for
"signed", not "single").
While there also correct the 3rd operand for the AVX512_4VNNIW entries:
Only the memory form is allowed (just like for AVX512_4FMAPS, where the
correct type is already in use).
Make %XV also print the separating blank in the VEX case, while making
it do nothing for EVEX-encoded insns. This way the AVX-VNNI entries
can be re-used for AVX512-VNNI, at the same time fixing the lack of
EVEX.W decoding.
For the AVX-VNNI ones further make sure only VEX.66 forms are actually
decoded.
I noticed recently that se_rfmci, a VLE mode instruction, was being
accepted by non-VLE cpus, and also that se_rfmci by itself in a
section did not cause SHF_PPC_VLE to be set. ie. both testcases added
by this patch fail without the changes to tc-ppc.c here.
Also, VLE, SPE2 and LSP insns were not accepted by the assembler with
-many nor were SPE2 and LSP being disassembled with -Many.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Wrap long lines. Add
vle_opcodes when PPC_OPCODE_VLE or PPC_OPCODE_ANY. Simplify
disassembler index segment checks. Add LSP and SPE2 opcodes
when PPC_OPCODE_ANY too.
(md_assemble): Correct logic adding PPC_APUINFO_VLE and
SHF_PPC_VLE.
* testsuite/gas/ppc/se_rfmci.s
* testsuite/gas/ppc/se_rfmci.d,
* testsuite/gas/ppc/se_rfmci_bad.d: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble SPE2 and LSP insn
when -Many.
* ppc-opc.c (vle_opcodes <se_rfmci>): Comment.
Where sub and subf forms of an instruction exist we generally
disassemble to the extended insn sub form rather than the underlying
machine subf instruction. Do so for SPE evsubw and evsubiw too.
spe_ambiguous.d always was a bit too optimistic. There is no sensible
way to disassemble identical bytes back to different and original
source. Instead change the test to check -Mraw results.
gas/
* testsuite/gas/ppc/ppc.exp: Run spe_ambiguous test.
* testsuite/gas/ppc/spe.d: Expect evsubw and evsubiw rather than
evsubfw and evsubifw.
* testsuite/gas/ppc/spe_ambiguous.s: Test evnor form equivalent
to evnot.
* testsuite/gas/ppc/spe_ambiguous.d: Test Mraw.
opcodes/
* ppc-opc.c (powerpc_opcodes): Move evsubw before evsubfw and
evsubiw before evsubifw and mark EXT.
It has bothered me for a long time that we have disabled LSP (and SPE)
tests. Also the LSP test comment indicating there is something wrong
with get_powerpc_dialect. I don't think there is. Decoding of a VLE
instruction depends on whether the processor is in VLE mode (some
processors support both VLE and standard PPC) which we flag per
section with SHF_PPC_VLE for decoding when disassembling.
Background: Some versions of powerpc e200 have "Lightweight Signal
Processing" support, examples being e200z215 and e200z425. As far as
I can tell, LSP and SPE are mutually exclusive. This seems to be
borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw"
have the same encoding. So none of the processor descriptions in
ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we
want disassembly to work. I also could not find anything to suggest
that the LSP insns are enabled only in VLE mode, which means the LSP
insns should not be in vle_opcodes.
Fix all this by moving the LSP insns to their own table, and add a new
e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from
-mvle. (Yes, I know, as I said above some of the e200z4 processors
have LSP. Others have SPE. It's hard to choose good options. Think
of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow
adding the LSP insn set.
include/
* opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare.
(LSP_OP_TO_SEG): Define.
binutils/
* doc/binutils.texi: Update ppc docs.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash.
* doc/c-ppc.texi: Document e200 and lsp.
* testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2.
* testsuite/gas/ppc/lsp.d: Likewise, disassembly too.
* testsuite/gas/ppc/ppc.exp: Don't xfail lsp test.
opcodes/
* ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set
PPC_OPCODE_LSP for e200z4 or vle.
(ppc_parse_cpu): Mutually exclude LSP and SPE.
(LSP_OPCD_SEGS): Define.
(lsp_opcd_indices): New array.
(disassemble_init_powerpc): Init lsp_opcd_indices.
(lookup_lsp): New function.
(print_insn_powerpc): Call it.
* ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout.
(vle_opcodes): Move LSP opcodes to..
(lsp_opcodes): ..here, and sort.
(lsp_num_opcodes): New.
Before changing the core disassembler, we take care of minor code clarity
issues and improve readability.
This commit removes unused variable last_map_state (set by the
print_insn_riscv function but not read anywhere else).
opcodes/ChangeLog:
* riscv-dis.c (last_map_state): Remove.
(print_insn_riscv): Remove setting last_map_state.
Before changing the core disassembler, we take care of minor code clarity
issues and improve readability.
Since xlen variable is not (and should not) used outside riscv-dis.c,
this commit makes this variable static.
opcodes/ChangeLog:
* riscv-dis.c (xlen): Make this variable static.
Before changing the core disassembler, we take care of minor code clarity
issues and improve readability.
This commit replaces uses of int with bool whenever possible.
opcodes/ChangeLog:
* riscv-dis.c (no_aliases) Change type to bool.
(set_default_riscv_dis_options): Use boolean.
(parse_riscv_dis_option_without_args): Likewise.
(riscv_disassemble_insn): Use boolean keywords.
Before changing the core disassembler, we take care of minor code clarity
issues and improve readability.
This commit takes care of improper spacing for code clarity.
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_insn): Tidying with spacing.
Before changing the core disassembler, we take care of minor code clarity
issues and improve readability.
First, we need to clarify the roles of variables and code portions.
opcodes/ChangeLog:
* riscv-dis.c (xlen): Move before default_isa_spec. Add comment.
(default_isa_spec, default_priv_spec): Add comment.
(riscv_gpr_names, riscv_fpr_names): Likewise.
(parse_riscv_dis_option_without_args): Likewise.
(parse_riscv_dis_option, parse_riscv_dis_options): Likewise.
(maybe_print_address): Likewise.
(riscv_disassemble_insn): Fix comment about the Zfinx "extension".
Add comment about the riscv_multi_subset_supports call.
Because all standard hints must be placed before corresponding instruction
for the disassembler, they may taint basic RVI instruction section.
This commit moves all standard hints before all basic RVI instructions
to improve maintainability.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Move all standard hints before all
standard instructions.
This is a part of small tidying (declare tables in riscv-opc.c).
include/ChangeLog:
* opcode/riscv.h (riscv_rm, riscv_pred_succ): Move declarations to
opcodes/riscv-opc.c. New non-static definitions.
opcodes/ChangeLog:
* riscv-opc.c (riscv_rm, riscv_pred_succ): Move from
include/opcode/riscv.h. Add description.
The operand type "Xl(...)" denotes that (...) is a literal. Specifically,
they are intended to be a constant immediate value.
This commit prints "Xl(...)" operand with dis_style_immediate style,
not dis_style_text.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Use dis_style_immediate on
the constant literal of the "Xl..." operand.
This commit fixes two minor typing-related issues for
T-Head immediate operands.
1. A signed type must be specified when printing with %i.
2. unsigned/signed int is not portable enough for max 32-bit immediates.
Instead, we should use unsigned/signed long.
The format string is changed accordingly.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Fix T-Head immediate types on
printing.
On the RISC-V disassembler, some separators have non-text style when
printed with another word with another style.
This commit splits those, making sure that those comma and tabs are printed
with the "text" style.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Split and print the comma as
text. (riscv_disassemble_insn): Split and print tabs as text.
(riscv_disassemble_data): Likewise.
This commit makes types of printf arguments on riscv_disassemble_data
as small as possible (as long as we can preserve the portability) to reduce
the cost of printf (especially on 32-bit host).
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_data): Use smallest possible type
to printing data.
"%x" format specifier requires unsigned type, not int. This commit
fixes this issue on the RISC-V disassembler.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Fix printf argument types where
the format specifier is "%x".
This commit fixes certain print calls on immediate operands to have
dis_style_immediate.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Fix immediates to have
"immediate" style. (riscv_disassemble_data): Likewise.
Because riscv_insn_length started to support instructions up to 176-bit,
we need to increase packet buffer size to 176-bit in size.
include/ChangeLog:
* opcode/riscv.h (RISCV_MAX_INSN_LEN): Max instruction length for
use in buffer size.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_riscv): Increase buffer size for max
176-bit length instructions.
This location of supervisor instructions is out of place (because many other
privileged instructions are located at the tail but after the supervisor
instructions, we have many unprivileged instructions including bit
manipulation / crypto / vector instructions).
Not only that, this is harmful to implement pseudoinstructions in the latest
'P'-extension proposal (CLROV and RDOV). This commit moves supervisor
instructions after all unprivileged instructions.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Adjust indents. Move supervisor
instructions after all unprivileged instructions.
This commit relaxes requirements to "fmv.s" instructions from 'F' to ('F'
or 'Zfinx'). The same applies to "fmv.d" and "fmv.q". Note that 'Zhinx'
extension already contains "fmv.h" instruction (as well as 'Zfh').
gas/ChangeLog:
* testsuite/gas/riscv/zfinx.s: Add "fmv.s" instruction.
* testsuite/gas/riscv/zfinx.d: Likewise.
* testsuite/gas/riscv/zdinx.s: Add "fmv.d" instruction.
* testsuite/gas/riscv/zdinx.d: Likewise.
* testsuite/gas/riscv/zqinx.d: Add "fmv.q" instruction.
* testsuite/gas/riscv/zqinx.s: Likewise.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Relax requirements to "fmv.[sdq]"
instructions to support those in 'Zfinx'/'Zdinx'/'Zqinx'.
Pre- and post-increment/decrement are side effects, the behavior of
which is undefined when combined with passing an address of the accessed
variable in the same function invocation. There's no need for the
increments here - simply adding 1 achieves the intended effect without
triggering compiler diagnostics (which are fatal with -Werror).
FENCE.TSO isn't an alias. ZIP and UNZIP in the long run likely are, but
presently they aren't. This fixes disassembly of these insns with
-Mno-aliases.
For disassembly to pick up aliases in favor of underlying insns (helping
readability in the common case), the aliases need to come ahead of the
"base" insns. Slightly more code movement is needed because of insns
with the same name needing to stay next to each other.
Note that the "rorw" alias entry also has the missing INSN_ALIAS added
here.
Clone a few testcases to exercise -Mno-aliases some more, better
covering the differences between the default and that disassembly mode.
With the command in the rule merely being "echo", i386-tbl.h won't be
rebuilt if missing, when at the same time i386-init.h is present and
up-to-date. Use a pattern rule instead to express the multiple targets
correctly (the &: rule separator is supported only by GNU make 4.3 and
newer). Note that now, for the opposite case to work (i386-tbl.h is
up-to-date but i386-init.h is missing), i386-init.h also needs
mentioning as a dependency somewhere: Add a fake dependency for
i386-opc.lo ("fake" because i386-opc.c doesn't include that header).
At the same time use $(AM_V_GEN) in the actual rule, replacing the
earlier (open-coded) "echo". And while there also drop a duplicate
dependency of i386-gen.o on i386-opc.h.
While in some cases deriving an AT&T-style suffix from an Intel syntax
memory operand size specifier is necessary, in many cases this is not
only pointless, but has led to the introduction of various workarounds:
Excessive use of IgnoreSize and NoRex64 as well as the ToDword and
ToQword attributes. Suppress suffix derivation when we can clearly tell
that the memory operand's size isn't going to be needed to infer the
possible need for the low byte/word opcode bit or an operand size prefix
(0x66 or REX.W).
As a result ToDword and ToQword can be dropped entirely, plus a fair
number of IgnoreSize and NoRex64 can also be got rid of. Note that
IgnoreSize needs to remain on legacy encoded SIMD insns with GPR
operand, to avoid emitting an operand size prefix in 16-bit mode. (Since
16-bit code using SIMD insns isn't well tested, clone an existing
testcase just enough to cover a few insns which are potentially
problematic but are being touched here.)
Note that while folding the VCVT{,T}S{S,D}2SI templates, VCVT{,T}SH2SI
isn't included there. This is to fulfill the request of not allowing L
and Q suffixes there, despite the inconsistency with VCVT{,T}S{S,D}2SI.
This patch adds support for the Zawrs ISA extension
("wrs.nto" and "wrs.sto" instructions).
The specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemPair extension, a collection of T-Head specific
two-GP-register memory operations.
The 'th' prefix and the "XTheadMemPair" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch introduces support for arbitrary literal instruction
arguments, that are not encoded in the opcode.
A typical use case for this feature would be an instruction that
applies an implicit shift by a constant value on an immediate
(that is a real operand). With this patch it is possible to make
this shift visible in the dissasembly and support such artificial
parameter as part of the asssembly code.
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemIdx extension, a collection of T-Head specific
GPR memory access instructions.
The 'th' prefix and the "XTheadMemIdx" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 44 instructions
(BU,HU,WU only for loads (zero-extend instead of sign-extend)):
* {L,S}{D,W,WU,H,HU,B,BU}{IA,IB} rd, rs1, imm5, imm2
* {L,S}R{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
* {L,S}UR{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadFMemIdx extension, a collection of
T-Head-specific floating-point memory access instructions.
The 'th' prefix and the "XTheadFMemIdx" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMac extension, a collection of
T-Head-specific multiply-accumulate instructions.
The 'th' prefix and the "XTheadMac" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCondMov extension, a collection of
T-Head-specific conditional move instructions.
The 'th' prefix and the "XTheadCondMov" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XThead{Ba,Bb,Bs} extensions, a collection of
T-Head-specific bitmanipulation instructions.
The 'th' prefix and the "XThead{Ba,Bb,Bs}" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch introduces support for arbitrary signed or unsigned immediate
encoding formats. The formats have the form "XsN@S" and "XuN@S" with N
being the number of bits and S the LSB position.
For example an immediate field of 5 bytes that encodes a signed value
and is stored in the bits 24-20 of the instruction word can use the
format specifier "Xs5@20".
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadSync extension, a collection of
T-Head-specific multi-processor synchronization instructions.
The 'th' prefix and the "XTheadSync" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCmo extension, a collection of T-Head specific
cache management operations.
The 'th' prefix and the "XTheadCmo" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 21 instructions:
* DCACHE.{C,CI,I}ALL
* DCACHE.{C,CI,I}{PA,VA,SW} rs1
* DCACHE.C{PAL1,VAL1} rs1
* ICACHE.I{ALL,ALLS}
* ICACHE.I{PA,VA} rs1
* L2CACHE.{C,CI,I}ALL
Contrary to Zicbom, the XTheadCmo instructions don't have a constant
displacement, therefore we have a different syntax for the arguments.
To clarify this is intended behaviour, there is a set of negative test
for Zicbom-style arguments in x-thead-cmo-fail.s.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
v2:
- Add missing DECLARE_INSN() list
- Fix ordering
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
There are a few operand types not used by any RISC-V instructions.
- Cx
- Vf
- Ve
- [
- ]
- b
But most of them has a reasoning to keep them:
- Cx : Same as "Ct" except it has a constraint to have rd == rs2
(similar to "Cw"). Although it hasn't used, its role is clear
enough to implement a new instruction with this operand type.
- Vf, Ve : Used by vector AMO instructions (not ratified and real
instructions are not upstreamed yet).
- [, ] : Unused tokenization symbols. Reserving them is not harmful
and a vendor may use this symbol for special purposes.
... except "b". I could not have found any reference to this operand type
except it works like the "s" operand type. Historically, it seems... it's
just unused from the beginning. Its role is not clear either.
On such cases, we should vacate this room for the new operand type with
much clearer roles.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Remove 'b' operand type.
Some components of GNU Binutils will pass "-Wstack-usage=262144" when
"GCC >= 5.0" is detected. However, Clang does not support "-Wstack-usage",
despite that related configuration part in bfd/warning.m4 handles the latest
Clang (15.0.0 as of this writing) as "GCC >= 5.0".
The option "-Wstack-usage" was ignored when the first version of Clang is
released but even this "ignoring" behavior is removed before Clang 4.0.0.
So, if we give Clang "-Wstack-usage=262144", it generates a warning, making
the build failure.
This commit checks "__clang__" macro to prevent adding the option if the
compiler is identified as Clang.
bfd/ChangeLog:
* warning.m4: Stop appending "-Wstack-usage=262144" option when
compiled with Clang.
* configure: Regenerate.
binutils/ChangeLog:
* configure: Regenerate.
gas/ChangeLog:
* configure: Regenerate.
gold/ChangeLog:
* configure: Regenerate.
gprof/ChangeLog:
* configure: Regenerate.
ld/ChangeLog:
* configure: Regenerate.
opcodes/ChangeLog:
* configure: Regenerate.
The -mfuture and -Mfuture options which are used for adding potential
new ISA instructions were not documented. They also lacked a bitmask
so new instructions could not be enabled by those options. Fixed.
binutils/
* doc/binutils.texi: Document -Mfuture.
gas/
* config/tc-ppc.c: Document -mfuture
* doc/c-ppc.texi: Likewise.
include/
* opcode/ppc.h (PPC_OPCODE_FUTURE): Define.
opcodes/
* ppc-dis.c (ppc_opts) <future>: Use it.
* ppc-opc.c (FUTURE): Define.
While PR binutils/29483 has now been addressed differently, this
originally proposed change still has its merits: Avoiding vsnprintf()
for typically far more than half of the overall output results in a 2-3%
performance gain in my testing (with debug builds of objdump, libbfd,
and libopcodes).
With that part of output no longer using staging_area[], the array also
doesn't need to be quite as large anymore (the largest presently used
size is 27, from "64-bit address is disabled").
While limiting the scope of "res" it became apparent that
- no caller cares about the function's return value,
- the comment about the return value was wrong,
- a particular positive return value would have been meaningless to the
caller.
Therefore convert the function to return "void" at the same time.
