This commit changes the language_data::la_watch_location_expression
function pointer member variable into a member function of
language_defn.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* ada-lang.c (ada_watch_location_expression): Rename to
ada_language::watch_location_expression.
(ada_language_data): Delete la_watch_location_expression
initializer.
(ada_language::watch_location_expression): New member function,
implementation from ada_watch_location_expression.
* breakpoint.c (watch_command_1): Update call to
watch_location_expression.
* c-lang.c (c_watch_location_expression): Rename to
language_defn::watch_location_expression.
(c_language_data): Delete la_watch_location_expression
initializer.
(cplus_language_data): Likewise.
(asm_language_data): Likewise.
(minimal_language_data): Likewise.
* c-lang.h (c_watch_location_expression): Delete declaration.
* d-lang.c (d_language_data): Delete la_watch_location_expression
initializer.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (language_defn::watch_location_expression): Member
function implementation from c_watch_location_expression.
(unknown_language_data): Delete la_watch_location_expression
initializer.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_watch_location_expression
field.
(language_defn::watch_location_expression): Declare new member
function.
* m2-lang.c (m2_language_data): Delete
la_watch_location_expression initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_watch_location_expression): Rename to
rust_language::watch_location_expression.
(rust_language_data): Delete la_watch_location_expression
initializer.
(rust_language::watch_location_expression): New member function,
implementation from rust_watch_location_expression.
In the following conditions:
- A target with hardware breakpoints available, and
- A target that uses software single stepping,
- An instruction at ADDRESS loops back to itself,
Now consider the following steps:
1. The user places a hardware breakpoint at ADDRESS (an instruction
that loops to itself),
2. The inferior runs and hits the breakpoint at ADDRESS,
3. The user tells GDB to 'continue'.
In #3 when the user tells GDB to continue, GDB first disables the
hardware breakpoint at ADDRESS, and then inserts a software
single-step breakpoint at ADDRESS. The original user-created
breakpoint was a hardware breakpoint, while the single-step breakpoint
will be a software breakpoint.
GDB continues and immediately hits the software single-step
breakpoint.
GDB then deletes the software single-step breakpoint by calling
delete_single_step_breakpoints, which eventually calls
delete_breakpoint, which, once the breakpoint (and its locations) are
deleted, calls update_global_location_list.
During update_global_location_list GDB spots that we have an old
location (the software single step breakpoint location) that is
inserted, but being deleted, and a location (the original hardware
breakpoint) at the same address which we are keeping, but which is not
currently inserted, GDB then calls breakpoint_locations_match on these
two locations.
Currently the locations do match, and so GDB calls swap_insertion
which swaps the "inserted" state of the two locations. The user
created hardware breakpoint is marked as inserted, while the GDB
internal software single step breakpoint is now marked as not
inserted. After this GDB returns through the call stack and leaves
delete_single_step_breakpoints.
After this GDB continues with its normal "stopping" process, as part
of this stopping process GDB removes all the breakpoints from the
target. Due to the swap it is now the user-created hardware
breakpoint that is marked as inserted, so it is this breakpoint GDB
tries to remove.
The problem is that GDB inserted the software single-step breakpoint
as a software breakpoint, but is now trying to remove the hardware
breakpoint. The problem is removing a software breakpoint is very
different to removing a hardware breakpoint, this could result is some
undetected undefined behaviour, or as in the original bug report (PR
gdb/25741), could result in the target throwing an error.
With "set breakpoint always-inserted on", we can easily reproduce this
against GDBserver. E.g.:
(gdb) hbreak main
Sending packet: $m400700,40#28...Packet received: 89e58b....
Sending packet: $m400736,1#fe...Packet received: 48
Hardware assisted breakpoint 1 at 0x400736: file threads.c, line 57.
Sending packet: $Z1,400736,1#48...Packet received: OK
Packet Z1 (hardware-breakpoint) is supported
(gdb) b main
Note: breakpoint 1 also set at pc 0x400736.
Sending packet: $m400736,1#fe...Packet received: 48
Breakpoint 2 at 0x400736: file threads.c, line 57.
(gdb) del
Delete all breakpoints? (y or n) y
Sending packet: $z0,400736,1#67...Packet received: E01
warning: Error removing breakpoint 2
This patch adds a testcase that does exactly that.
Trying to enhance GDB to handle this scenario while continuing to
avoid inserting redundant software and hardware breakpoints at the
same address turns out futile, because, given non-stop and breakpoints
always-inserted, if the user:
#1 - inserts a hw breakpoint, then
#2 - inserts a sw breakpoint at the same address, and then
#3 - removes the original hw breakpoint,
GDB would have to make sure to insert the sw breakpoint before
removing the hw breakpoint, to avoid running threads missing the
breakpoint. I.e., there's always going to be a window where a target
needs to be able to handle both sw and a hw breakpoints installed at
the same address. You can see more detailed description of that issue
here:
https://sourceware.org/pipermail/gdb-patches/2020-April/167738.html
So the fix here is to just stop considering software breakpoints and
hw breakpoints duplicates, and let GDB insert sw and hw breakpoints at
the same address.
The central change is to make breakpoint_locations_match consider the
location's type too. There are several other changes necessary to
actually make that that work correctly, however:
- We need to handle the duplicates detection better. Take a look at
the loop at the tail end of update_global_location_list. Currently,
because breakpoint locations aren't sorted by type, we can end up
with, at the same address, a sw break, then a hw break, then a sw
break, etc. The result is that that second sw break won't be
considered a duplicate of the first sw break. Seems like we already
handle that incorrectly for range breakpoints.
- The "set breakpoint auto-hw on" handling is moved out of
insert_bp_location to update_global_location_list, before the
duplicates determination.
Moving "set breakpoint auto-hw off" handling as well and downgrading
it to a warning+'disabling the location' was considered too, but in
the end discarded, because we want to error out with internal and
momentary breakpoints, like software single-step breakpoints.
Disabling such locations at update_global_location_list time would
make GDB lose control of the inferior.
- In update_breakpoint_locations, the logic of matching old locations
with new locations, in the have_ambiguous_names case, is updated to
still consider sw vs hw locations the same.
- Review all ALL_BP_LOCATIONS_AT_ADDR uses, and update those that
might need to be updated, and update comments for those that don't.
Note that that macro walks all locations at a given address, and
doesn't call breakpoint_locations_match.
The result against GDBserver (with "set breakpoint
condition-evaluation host" to avoid seeing confusing reinsertions) is:
(gdb) hbreak main
Sending packet: $m400736,1#fe...Packet received: 48
Hardware assisted breakpoint 1 at 0x400736: file main.c, line 57.
Sending packet: $Z1,400736,1#48...Packet received: OK
(gdb) b main
Note: breakpoint 1 also set at pc 0x400736.
Sending packet: $m400736,1#fe...Packet received: 48
Breakpoint 4 at 0x400736: file main.c, line 57.
Sending packet: $Z0,400736,1#47...Packet received: OK
(gdb) del 3
Sending packet: $z1,400736,1#68...Packet received: OK
gdb/ChangeLog:
2020-05-17 Pedro Alves <palves@redhat.com>
Andrew Burgess <andrew.burgess@embecosm.com>
Keno Fischer <keno@juliacomputing.com>
PR gdb/25741
* breakpoint.c (build_target_condition_list): Update comments.
(build_target_command_list): Update comments and skip matching
locations.
(insert_bp_location): Move "set breakpoint auto-hw on" handling to
a separate function. Simplify "set breakpoint auto-hw off"
handling.
(insert_breakpoints): Update comment.
(tracepoint_locations_match): New parameter. For breakpoints,
compare location types too, if the caller wants to.
(handle_automatic_hardware_breakpoints): New functions.
(bp_location_is_less_than): Also sort by location type and
hardware breakpoint length.
(update_global_location_list): Handle "set breakpoint auto-hw on"
here.
(update_breakpoint_locations): Ask breakpoint_locations_match to
ignore location types.
gdb/testsuite/ChangeLog:
2020-05-17 Pedro Alves <palves@redhat.com>
PR gdb/25741
* gdb.base/hw-sw-break-same-address.exp: New file.
This commit finally does the (small) change that started this patch
series.
It ensures that the class_alias is only used for user-defined aliases.
So, the few GDB pre-defined aliases that were using the 'class_alias'
class are now using a real help class, typically the class of
the aliased command.
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* command.h (enum command_class): Improve comments, document
that class_alias is for user-defined aliases, give the class
name for each class, remove unused class_xdb.
* cli/cli-decode.c (add_com_alias): Document THECLASS intended usage.
* breakpoint.c (_initialize_breakpoint): Replace class_alias
by a precise class.
* infcmd.c (_initialize_infcmd): Likewise.
* reverse.c (_initialize_reverse): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
gdb/testsuite/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Verify 'help aliases' shows user defined aliases.
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
I looked at all the calls to add_prefix_cmd, and replaced them with
calls to add_basic_prefix_cmd or add_show_prefix_cmd when appropriate.
This makes gdb's command language a bit more regular. I don't think
there's a significant downside.
Note that this patch removes a couple of tests. The removed ones are
completely redundant.
gdb/ChangeLog
2020-05-03 Tom Tromey <tom@tromey.com>
* breakpoint.c (catch_command, tcatch_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(set_breakpoint_cmd, show_breakpoint_cmd): Remove
* utils.c (set_internal_problem_cmd, show_internal_problem_cmd):
Remove.
(add_internal_problem_command): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (set_mipsfpu_command): Remove.
(_initialize_mips_tdep): Use add_basic_prefix_cmd.
* dwarf2/index-cache.c (set_index_cache_command): Remove.
(_initialize_index_cache): Use add_basic_prefix_cmd.
* memattr.c (dummy_cmd): Remove.
(_initialize_mem): Use add_basic_prefix_cmd, add_show_prefix_cmd.
* tui/tui-win.c (set_tui_cmd, show_tui_cmd): Remove.
(_initialize_tui_win): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-logging.c (set_logging_command): Remove.
(_initialize_cli_logging): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_logging_command): Remove.
* target.c (target_command): Remove.
(add_target): Use add_basic_prefix_cmd.
gdb/testsuite/ChangeLog
2020-05-03 Tom Tromey <tom@tromey.com>
* gdb.base/sepdebug.exp: Remove "catch" test.
* gdb.base/break.exp: Remove "catch" test.
* gdb.base/default.exp: Update expected output.
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
A few spots in gdb use sprintf_vma to print a CORE_ADDR. This will
fail on a 32-bit build once CORE_ADDR is always a 64-bit type.
This patch replaces these calls with phex instead.
gdb/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* remote.c (remote_target::download_tracepoint)
(remote_target::enable_tracepoint)
(remote_target::disable_tracepoint): Use phex, not sprintf_vma.
* breakpoint.c (print_recreate_masked_watchpoint): Use phex, not
sprintf_vma.
New in v3:
- Code cleanups based on reviews.
New in v2:
- Fixed misc problems based on reviews.
- Switched to using gdbarch_program_breakpoint_here_p as opposed to
gdbarch_insn_is_breakpoint.
- Fixed matching of brk instructions. Previously the mask was incorrect, which
was showing up as a few failures in the testsuite. Now it is clean.
- New testcase (separate patch).
- Moved program_breakpoint_here () to arch-utils.c and made it the default
implementation of gdbarch_program_breakpoint_here_p.
--
It was reported to me that program breakpoints (permanent ones inserted into
the code itself) other than the one GDB uses for AArch64 (0xd4200000) do not
generate visible stops when continuing, and GDB will continue spinning
infinitely.
This happens because GDB, upon hitting one of those program breakpoints, thinks
the SIGTRAP came from a delayed breakpoint hit...
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x90f
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 14198)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 14198
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
...
... which is not the case.
If the program breakpoint is one GDB recognizes, then it will stop when it
hits it.
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x0
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 14193)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 14193
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14193] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14193.14193.0 [process 14193],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: random signal (GDB_SIGNAL_TRAP)
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 14193 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 14193 not executing
infrun: stop_all_threads done
Program received signal SIGTRAP, Trace/breakpoint trap.
problem_function () at brk_0.c:7
7 asm("brk %0\n\t" ::"n"(0x0));
infrun: infrun_async(0)
Otherwise GDB will keep trying to resume the inferior and will keep
seeing the SIGTRAP's, without stopping.
To the user it appears GDB has gone into an infinite loop, interruptible only
by Ctrl-C.
Also, windbg seems to use a different variation of AArch64 breakpoint compared
to GDB. This causes problems when debugging Windows on ARM binaries, when
program breakpoints are being used.
The proposed patch creates a new gdbarch method (gdbarch_program_breakpoint_here_p)
that tells GDB whether the underlying instruction is a breakpoint instruction
or not.
This is more general than only checking for the instruction GDB uses as
breakpoint.
The existing logic is still preserved for targets that do not implement this
new gdbarch method.
The end result is like so:
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x90f
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 16417)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 16417
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 16417] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 16417.16417.0 [process 16417],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: random signal (GDB_SIGNAL_TRAP)
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 16417 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 16417 not executing
infrun: stop_all_threads done
Program received signal SIGTRAP, Trace/breakpoint trap.
problem_function () at brk.c:7
7 asm("brk %0\n\t" ::"n"(0x900 + 0xf));
infrun: infrun_async(0)
gdb/ChangeLog:
2020-01-29 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (BRK_INSN_MASK): Define to 0xffe0001f.
(BRK_INSN_MASK): Define to 0xd4200000.
(aarch64_program_breakpoint_here_p): New function.
(aarch64_gdbarch_init): Set gdbarch_program_breakpoint_here_p hook.
* arch-utils.c (default_program_breakpoint_here_p): Moved from
breakpoint.c.
* arch-utils.h (default_program_breakpoint_here_p): Moved from
breakpoint.h
* breakpoint.c (bp_loc_is_permanent): Changed return type to bool and
call gdbarch_program_breakpoint_here_p.
(program_breakpoint_here): Moved to arch-utils.c, renamed to
default_program_breakpoint_here_p, changed return type to bool and
simplified.
* breakpoint.h (program_breakpoint_here): Moved prototype to
arch-utils.h, renamed to default_program_breakpoint_here_p and changed
return type to bool.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (program_breakpoint_here_p): New method.
* infrun.c (handle_signal_stop): Call
gdbarch_program_breakpoint_here_p.
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
The documentation for make-breakpoint from the Guile API and the `spec'
variant of the gdb.Breakpoint constructor from the Python API state that
the format acceptable for location strings is the same as that accepted
by the break command. However, using the -probe qualifier at the
beginning of the location string causes a GDB internal error as it
attempts to decode a probe location in the wrong code path. Without this
functionality, there doesn't appear to be another way to set breakpoints
on probe points from Python or Guile scripts.
This patch introduces a new helper function that returns a
breakpoint_ops instance appropriate for a parsed location and updates
the Guile and Python bindings to use said function, rather than the
current hard-coded use of bkpt_breakpoint_ops. Since this logic is
duplicated in the handling of the `break' and `trace' commands, those
are also updated to call into the new helper function.
gdb/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Fix scripted probe breakpoints.
* breakpoint.c (tracepoint_probe_breakpoint_ops): Move
declaration forward.
(breakpoint_ops_for_event_location_type)
(breakpoint_ops_for_event_location): Add function definitions.
(break_command_1, trace_command): Use
breakpoint_ops_for_event_location.
* breakpoint.h (breakpoint_ops_for_event_location): Add function
declarations.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Use
breakpoint_ops_for_event_location.
* python/py-breakpoint.c (bppy_init): Use
breakpoint_ops_for_event_location.
gdb/testsuite/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Test scripted probe breakpoints.
* gdb.guile/scm-breakpoint.c (main): Add probe point.
* gdb.python/py-breakpoint.c (main): Likewise.
* gdb.guile/scm-breakpoint.exp (test_bkpt_probe): Add probe
specifier test.
* gdb.python/py-breakpoint.exp (test_bkpt_probe): Likewise.
That's an internal variable of breakpoint.c. Insted, use
iterate_over_breakpoints to update the breakpoint list.
gdb/ChangeLog:
2019-10-15 Christian Biesinger <cbiesinger@google.com>
* breakpoint.c (breakpoint_chain): Make static.
* tui/tui-winsource.c: Call iterate_over_breakpoints instead
of accessing breakpoint_chain.
Change-Id: Ic259b2c3a4c1f5a47f34cfd7fccbdcf274417429
In an attempt to reduce the number of files re-build when some headers
are touched, I ran include-what-you-use with breakpoint.c as a guinea
pig. It revealed a few files that were unnecessary to include, which
this patch removes.
breakpoint.c uses tilde_expand from readline, hence the necessity to
include tilde.h. AFAIK, it's fine to include just that, and not the
whole readline headers.
include-what-you-use also reported many header files that should be
included but aren't, I suppose that breakpoint.c currently includes them
indirectly. For now I'll pretend I didn't see that :).
gdb/ChangeLog:
* breakpoint.c: Remove some includes: continuations.h, skip.h,
mi/mi-main.h, readline/readline.h, readline/history.h. Add
include: readline/tilde.h.
-#include "skip.h"
#include "ax-gdb.h"
#include "dummy-frame.h"
#include "interps.h"
@@ -69,11 +67,9 @@
#include "thread-fsm.h"
#include "tid-parse.h"
#include "cli/cli-style.h"
-#include "mi/mi-main.h"
/* readline include files */
-#include "readline/readline.h"
-#include "readline/history.h"
+#include "readline/tilde.h"
/* readline defines this. */
#undef savestring
Change-Id: I88bfe9071f2f973fd84caaf04b95c33a4dfb33de
This introduces a new "metadata" style and changes many places in gdb
to use it. The idea here is to let the user distinguish gdb output
from output that (conceptually at least) comes directly from the
inferior. The newly-styled category includes text that gdb
traditionally surrounds in "<...>", like "<unavailable>".
I only added a single test for this. In many cases this output is
difficult to test. Also, while developing this errors in the
implementation of the new printf formats showed up as regressions.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* p-lang.c (pascal_printstr): Use metadata style.
* value.c (show_convenience): Use metadata style.
* valprint.c (valprint_check_validity, val_print_optimized_out)
(val_print_not_saved, val_print_unavailable)
(val_print_invalid_address, generic_val_print, val_print)
(value_check_printable, val_print_array_elements): Use metadata
style.
* ui-out.h (class ui_out) <field_fmt>: New overload.
<do_field_fmt>: Add style parameter.
* ui-out.c (ui_out::field_fmt): New overload.
* typeprint.c (type_print_unknown_return_type)
(val_print_not_allocated, val_print_not_associated): Use metadata
style.
* tui/tui-out.h (class tui_ui_out) <do_field_fmt>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_fmt): Update.
* tracepoint.c (tvariables_info_1): Use metadata style.
* stack.c (print_frame_arg, print_frame_info, print_frame)
(info_frame_command_core): Use metadata style.
* skip.c (info_skip_command): Use metadata style.
* rust-lang.c (rust_print_enum): Use metadata style.
* python/py-prettyprint.c (print_stack_unless_memory_error): Use
metadata style.
* python/py-framefilter.c (py_print_single_arg): Use metadata
style.
* printcmd.c (do_one_display, print_variable_and_value): Use
metadata style.
* p-valprint.c (pascal_val_print)
(pascal_object_print_value_fields): Use metadata style.
* p-typeprint.c (pascal_type_print_base): Use metadata style.
* mi/mi-out.h (class mi_ui_out) <do_field_fmt>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_field_fmt): Update.
* m2-valprint.c (m2_print_long_set): Use metadata style.
* m2-typeprint.c (m2_print_type): Use metadata style.
* infcmd.c (print_return_value_1): Use metadata style.
* gnu-v3-abi.c (print_one_vtable): Use metadata style.
* f-valprint.c (info_common_command_for_block): Use metadata
style.
* f-typeprint.c (f_type_print_base): Use metadata style.
* expprint.c (print_subexp_standard): Use metadata style.
* cp-valprint.c (cp_print_value_fields): Use metadata style.
* cli/cli-style.h (class cli_style_option): Add constructor.
(metadata_style): Declare.
* cli/cli-style.c (metadata_style): New global.
(_initialize_cli_style): Register metadata style.
* cli-out.h (class cli_ui_out) <do_field_fmt>: Add style
parameter.
* cli-out.c (cli_ui_out::do_field_fmt): Update.
* c-typeprint.c (c_type_print_base_struct_union)
(c_type_print_base_1): Use metadata style.
* breakpoint.c (watchpoint_value_print)
(print_one_breakpoint_location): Use metadata style.
* break-catch-syscall.c (print_one_catch_syscall): Use metadata
style.
* break-catch-sig.c (signal_catchpoint_print_one): Use metadata
style.
* ada-valprint.c (val_print_packed_array_elements, printstr)
(print_field_values, ada_val_print_ref, ada_val_print): Use
metadata style.
* ada-typeprint.c (print_array_type, ada_print_type): Use metadata
style.
* ada-tasks.c (print_ada_task_info, info_task): Use metadata
style.
* ada-lang.c (user_select_syms): Use metadata style.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* lib/gdb-utils.exp (style): Handle "metadata" argument.
* gdb.base/style.exp: Add metadata style test.
This changes various spots in gdb to use the new %p format suffixes.
gdb/ChangeLog
2019-10-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* symtab.c (print_symbol_info): Use %ps.
(print_msymbol_info): Use %ps.
* symfile.c (symbol_file_add_with_addrs): Use %ps.
* printcmd.c (print_variable_and_value): Use %ps.
* macrocmd.c (show_pp_source_pos): Use %ps.
* infrun.c (print_exited_reason): Use ui_out::message.
* breakpoint.c (watchpoint_check, print_one_breakpoint_location)
(describe_other_breakpoints): Use ui_out::message and new
formats.
(say_where): Use new formats.
(bkpt_print_it, tracepoint_print_one_detail): Use ui_out::message
and new formats.
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
This changes breakpoint::filter to be a unique_xmalloc_ptr, removing
an explicit xfree, as well as a use of a "release" method.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* breakpoint.c (init_breakpoint_sal): Update.
(breakpoint): Update.
* breakpoint.h (struct breakpoint) <filter>: Now a
unique_xmalloc_ptr.
This replaces uses of field_fmt with a "%s" format string to use
field_string instead. Also, one use of "%9lx" is replaced with a call
to phex_nz; the '9' is dropped as it is implicit in the field width.
2019-07-15 Tom Tromey <tromey@adacore.com>
* mi/mi-main.c (list_available_thread_groups): Use field_string.
* mi/mi-interp.c (mi_memory_changed): Use field_string.
* target.c (flash_erase_command): Use field_string.
* infrun.c (print_signal_received_reason): Use field_string.
* i386-tdep.c (i386_mpx_print_bounds): Use field_string.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Use
field_string.
* ada-tasks.c (print_ada_task_info): Use field_string.
This includes changing the FILTER parameters of two functions
accordingly. I also tried to normalize the function comments to our
current standards.
gdb/ChangeLog:
* breakpoint.c (is_hardware_watchpoint): Remove
forward-declaration.
(is_masked_watchpoint): Change return type to bool.
(is_tracepoint): Likewise.
(is_breakpoint): Likewise.
(is_hardware_watchpoint): Likewise.
(is_watchpoint): Likewise.
(is_no_memory_software_watchpoint): Likewise.
(is_catchpoint): Likewise.
(breakpoint_1): Make FILTER parameter's return type bool.
is_masked_watchpoint): Change return type to bool.
(save_breakpoints): Make FILTER parameter's return type bool.
* breakpoint.h (is_breakpoint): Change return type to bool.
(is_watchpoint): Likewise.
(is_catchpoint): Likewise.
(is_tracepoint): Likewise.
I noticed the documentation of breakpoint_1 way way out of date, so this
is an attempt to update it. I have changed the parameter names to
something that seems clearer to me.
gdb/ChangeLog:
* breakpoint.c (breakpoint_1): Update doc and parameter names.
This commit makes "maint info breakpoints" show the internal locations
of C++ exception catchpoints:
(gdb) info breakpoints
Num Type Disp Enb Address What
2 catchpoint keep y exception catch
With multiple locations:
(gdb) maint info breakpoints
Num Type Disp Enb Address What
2 catchpoint keep y exception catch
2.1 y 0x000000000040545f <__cxa_begin_catch+95> inf 1
2.2 y 0x00007ffff71dbe0f <__cxxabiv1::__cxa_begin_catch(void*)+95> inf 1
(gdb)
With a single location:
(gdb) maint info breakpoints 2
Num Type Disp Enb Address What
2 catchpoint keep y exception catch inf 1
2.1 y 0x00007ffff7bc0b7f <__cxa_begin_catch+95> inf 1
With no locations:
(gdb) maint info breakpoints 2
Num Type Disp Enb Address What
2 catchpoint keep y exception catch inf 1
Other catchpoints still show the same way, here a catch signal:
(gdb) info breakpoints
Num Type Disp Enb Address What
3 catchpoint keep y signal "<standard signals>"
(gdb) maint info breakpoints
Num Type Disp Enb Address What
3 catchpoint keep y signal "<standard signals>" inf 1
(gdb)
Note: I considered making the locations be printed from within
breakpoint_ops::print_one(), but gave up given the handling for the
broken MI v2 output:
/* The mi2 broken format: the main breakpoint tuple ends here, the locations
are outside. */
if (!use_fixed_output)
bkpt_tuple_emitter.reset ();
in print_one_breakpoint.
gdb/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* break-catch-throw.c (is_exception_catchpoint): New.
* breakpoint.c (print_one_breakpoint_location): New parameter
'raw_loc'. Handle it. Use
is_watchpoint/is_catchpoint/is_exception_catchpoint instead of
looking at the breakpoint's type.
(print_one_breakpoint): If handling "maint info breakpoints", also
print locations of exception catchpoints.
* breakpoint.h (is_exception_catchpoint): Declare.
Currently, with:
(gdb) catch catch
Catchpoint 1 (catch)
(gdb) catch throw
Catchpoint 2 (throw)
(gdb) catch rethrow
Catchpoint 3 (rethrow)
You get:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000b122af exception catch
2 breakpoint keep y 0x0000000000b1288d exception throw
3 breakpoint keep y 0x0000000000b12931 exception rethrow
I think it doesn't make much sense usability-wise, to show a
catchpoint as a breakpoint. The fact that GDB sets a breakpoint at
some magic address in the C++ run time is an implementation detail,
IMO. And as seen in the previous patch, such a catchpoint can end up
with more than one location/address even, so showing a single address
isn't entirely accurate.
This commit hides the addresses from view, and makes GDB show
"catchpoint" for type as well:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 catchpoint keep y exception catch
2 catchpoint keep y exception throw
3 catchpoint keep y exception rethrow
This comment in the code seems telling:
/* We need to reset 'type' in order for code in breakpoint.c to do
the right thing. */
cp->type = bp_breakpoint;
It kind of suggests that the reason catchpoints end up shown as
breakpoints was that it was easier to implement them that way, rather
than a desired property.
This commit fixes things up to make it possible to have bp_catch
breakpoints have software/hardware breakpoint locations, thus
eliminating the need for that hack:
- redo breakpoint_address_is_meaningful in terms of the location's
type rather than breakpoint type.
- teach bpstat_what about stepping over the catchpoint locations.
- install a allocate_location method for "catch catch/throw/rethrow",
one that forces the location type.
Note that this also reverts the gdb hunk from:
commit 2a8be20359
Commit: Tom Tromey <tom@tromey.com>
CommitDate: Sat Oct 6 22:17:45 2018 -0600
Fix Python gdb.Breakpoint.location crash
because now "catch throw" catchpoints hit the
if (obj->bp->type != bp_breakpoint)
Py_RETURN_NONE;
check above, and, adjusts the testcase to no longer expect to see the
catchpoint in the gdb.breakpoints() list.
(Note: might make sense to do the same to Ada exception catchpoints.)
gdb/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* break-catch-throw.c (print_one_exception_catchpoint): Skip the
"addr" field.
(allocate_location_exception_catchpoint): New.
(handle_gnu_v3_exceptions): Don't reset 'type' to bp_breakpoint.
(initialize_throw_catchpoint_ops): Install
allocate_location_exception_catchpoint as allocate_location
method.
* breakpoint.c (bpstat_what) <bp_catch>: Set action to
BPSTAT_WHAT_SINGLE if not stopping and the location's type is not
bp_loc_other.
(breakpoint_address_is_meaningful): Delete.
(bl_address_is_meaningful): New.
(breakpoint_locations_match): Adjust comment.
(bp_location_from_bp_type): New, factored out of...
(bp_location::bp_location(breakpoint *)): ... this.
(bp_location::bp_location(breakpoint *, bp_loc_type)): New,
factored out of...
(bp_location::bp_location(breakpoint *)): ... this. Reimplement.
(bp_loc_is_permanent): Use bl_address_is_meaningful instead of
breakpoint_address_is_meaningful.
(bp_locations_compare): Adjust comment.
(update_global_location_list): Use bl_address_is_meaningful
instead of breakpoint_address_is_meaningful.
* breakpoint.h (bp_location::bp_location(breakpoint *)): New
explicit.
(bp_location::bp_location(breakpoint *, bp_loc_type)): Declare.
* python/py-breakpoint.c (bppy_get_location): No longer check
whether location is null.
gdb/doc/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* gdb.texinfo (C++ Exception GDB/MI Catchpoint Commands): Adjust
examples to show type=catchpoint instead of type=breakpoint and an
address.
gdb/testsuite/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* gdb.cp/catch-multi-stdlib.exp: Adjust expected "info
breakpoints" output.
* gdb.cp/exception.exp: Adjust expected "info breakpoints" output.
* gdb.python/py-breakpoint.exp: No longer expect that "catch
throw" creates breakpoint.
* gdb.mi/mi-catch-cpp-exceptions.exp (setup_catchpoint): Expect
'type="catchpoint"'.
If you debug current GDB, set a "catch catch/throw/rethrow"
catchpoint, and then do "info breakpoints", the top GDB hits an
internal error:
(top-gdb) catch catch
Catchpoint 1 (catch)
(top-gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y src/gdb/breakpoint.c:6040: internal-error: void print_one_breakpoint_location(breakpoint*, bp_location*, int, bp_location**, int): Assertion `b->loc == NULL || b->loc->next == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The assertion in question is asserting that a breakpoint with a
print_one method only has one location, and it fails because this
catchpoint ends up with two locations.
Internally, "catch catch" sets a breakpoint at __cxa_begin_catch. If
we do that manually, we see the locations:
(top-gdb) b -qualified __cxa_begin_catch
Breakpoint 2 at 0xb122b0 (2 locations)
(top-gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint keep y <MULTIPLE>
2.1 y 0x0000000000b122b0 <__cxa_begin_catch>
2.2 y 0x00007ffff2f4ddb0 in __cxxabiv1::__cxa_begin_catch(void*) at ../../../../libstdc++-v3/libsupc++/eh_catch.cc:41
Note that I had used -qualified. It seems strange that we get a
location for a namespaced symbol, but that happens because the minimal
symbol for that address is indeed called __cxa_begin_catch.
The real issue is that gdb is linked with
-static-libgcc/-static-libstdc++. And then, it _also_ ends up with
shared libstc++ loaded:
(top-gdb) info sharedlibrary stdc++
From To Syms Read Shared Object Library
0x00007ffff2f4b380 0x00007ffff2ffc018 Yes /lib64/libstdc++.so.6
Location 2.2 is set within libstdc++.so.6's range:
(top-gdb) p 0x00007ffff2f4b380 <= 0x00007ffff2f4ddb0 && 0x00007ffff2f4ddb0 < 0x00007ffff2ffc018
$1 = true
So due to -static-lib*, we end up with _two_ copies of the
__cxa_begin_catch code:
(top-gdb) disassemble 0x0000000000b122b0
Dump of assembler code for function __cxa_begin_catch:
0x0000000000b122b0 <+0>: push %rbx
0x0000000000b122b1 <+1>: mov %rdi,%rbx
0x0000000000b122b4 <+4>: callq 0xb11a80 <__cxa_get_globals>
0x0000000000b122b9 <+9>: movabs $0xb8b1aabcbcd4d500,%rdx
...
(top-gdb) disassemble 0x00007ffff2f4ddb0
Dump of assembler code for function __cxxabiv1::__cxa_begin_catch(void*):
0x00007ffff2f4ddb0 <+0>: push %rbx
0x00007ffff2f4ddb1 <+1>: mov %rdi,%rbx
0x00007ffff2f4ddb4 <+4>: callq 0x7ffff2f4a090 <__cxa_get_globals@plt>
0x00007ffff2f4ddb9 <+9>: movabs $0xb8b1aabcbcd4d500,%rdx
...
I think we end up with libstdc++.so.6 loaded because
libsource-highlight.so depends on it.
Irrespective of whether it's a good idea to use
-static-libgcc/-static-libstdc++, GDB should not crash. Since there
are two copies of the code, it seems right to have more than one
location. So the fix is just to remove the assertion.
A testcase is included, which mimics the scenerio described above,
with binary linked with -static-lib{stdc++,gcc} and a shared library
that is linked normally, along with other combinations for good
measure.
gdb/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
PR c++/15468
* breakpoint.c (print_one_breakpoint_location): Remove
single-location assert.
gdb/testsuite/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
PR c++/15468
* gdb.cp/except-multi-location-lib.cc: New.
* gdb.cp/except-multi-location-main.cc: New.
* gdb.cp/except-multi-location.exp: New.
The explicit_loc parameter in set_breakpoint_location_function is not
useful. This parameter is set from two possible fields of the
symtab_and_line used to create the breakpoint; the explicit_pc field,
and the explicit_line field.
First, the explicit_line field, this is not currently set for any
breakpoint command, so will never be true.
Next, the explicit_pc field. This can be true but will never be true
at the same time that the sal->msymbol field is also true - the
sal->msymbol is only ever set in linespec.c:minsym_found, which
doesn't allow for explicitly setting the pc.
The result of this is that if we are setting a breakpoint on an
msymbol that could turn out to be an ifunc, then we will not also have
either an explicit_pc or an explicit_line, this check can therefore be
removed.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* breakpoint.c (set_breakpoint_location_function): Remove
explicit_loc parameter.
(momentary_breakpoint_from_master): Update call to
set_breakpoint_location_function.
(add_location_to_breakpoint): Likewise.
... since nobody uses it.
gdb/ChangeLog:
* breakpoint.h (remove_breakpoints_inf): Change return type to
void, move function documentation here.
* breakpoint.c (remove_breakpoints_inf): Change return type to
void, move function documentation to header.
Adds some MI commands to catch C++ exceptions. The new commands are
-catch-throw, -catch-rethrow, and -catch-catch, these all correspond
to the CLI commands 'catch throw', 'catch rethrow', and 'catch catch'.
Each MI command takes two optional arguments, '-t' has the effect of
calling 'tcatch' instead of 'catch', for example:
(gdb)
-catch-throw -t
Is the same as:
(gdb) tcatch throw
There is also a '-r REGEXP' argument that can supply a regexp to match
against the exception type, so:
(gdb)
-catch-catch -r PATTERN
Is the same as:
(gdb) catch catch PATTERN
The change in print_mention_exception_catchpoint might seem a little
strange; changing the output from using ui_out::field_int and
ui_out::text to using ui_out::message.
The print_mention_exception_catchpoint is used as the 'print_mention'
method for the exception catchpoint breakpoint object. Most of the
other 'print_mention' methods (see breakpoint.c) use either
printf_filtered, of ui_out::message. Using field_int was causing an
unexpected field to be added to the MI output. Here's the output
without the change in print_mention_exception_catchpoint:
(gdb)
-catch-throw
^done,bkptno="1",bkpt={number="1",type="breakpoint",disp="keep",
enabled="y",addr="0x00000000004006c0",
what="exception throw",catch-type="throw",
thread-groups=["i1"],times="0"}
Notice the breakpoint number appears in both the 'bkptno' field, and
the 'number' field within the 'bkpt' tuple. Here's the output with
the change in print_mention_exception_catchpoint:
(gdb)
-catch-throw
^done,bkpt={number="1",type="breakpoint",disp="keep",
enabled="y",addr="0x00000000004006c0",
what="exception throw",catch-type="throw",
thread-groups=["i1"],times="0"}
gdb/ChangeLog:
* NEWS: Mention new MI commands.
* break-catch-throw.c (enum exception_event_kind): Move to
breakpoint.h.
(print_mention_exception_catchpoint): Output text as a single
message.
(catch_exception_command_1): Rename to...
(catch_exception_event): ...this, make non-static, update header
command, and change some parameter types.
(catch_catch_command): Update for changes to
catch_exception_command_1.
(catch_throw_command): Likewise.
(catch_rethrow_command): Likewise.
* breakpoint.c (enum exception_event_kind): Delete.
* breakpoint.h (enum exception_event_kind): Moved here from
break-catch-throw.c.
(catch_exception_event): Declare.
* mi/mi-cmd-catch.c (mi_cmd_catch_exception_event): New function.
(mi_cmd_catch_throw): New function.
(mi_cmd_catch_rethrow): New function.
(mi_cmd_catch_catch): New function.
* mi/mi-cmds.c (mi_cmds): Add 'catch-throw', 'catch-rethrow', and
'catch-catch' entries.
* mi/mi-cmds.h (mi_cmd_catch_throw): Declare.
(mi_cmd_catch_rethrow): Declare.
(mi_cmd_catch_catch): Declare.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Catchpoint Commands): Add menu entry to new
node.
(C++ Exception GDB/MI Catchpoint Commands): New node to describe
new MI commands.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-catch-cpp-exceptions.cc: New file.
* gdb.mi/mi-catch-cpp-exceptions.exp: New file.
* lib/mi-support.exp (mi_expect_stop): Handle 'exception-caught'
as a stop reason.
Basically every caller of check_for_argument needs to skip space after
the argument. This patch makes check_for_argument do it itself.
Suggested by Philippe Waroquiers.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Remove skip_spaces call.
* breakpoint.c (watch_maybe_just_location): Remove skip_spaces
call.
* cli/cli-cmds.c (apropos_command): Remove skip_spaces call.
* cli/cli-utils.c (extract_info_print_args): Remove skip_spaces
calls.
(check_for_argument): Skip spaces after argument.
I noticed recently that some command had a trailing newline in its
"help" output. So, I temporarily hacked cli-decode.c to print
something when a new command was installed that had a trailing newline
in its help message, and wrote this patch, which removes all the ones
I could find this way. (There could still be a few more in *-nat
files.)
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-11 Tom Tromey <tromey@adacore.com>
* infcall.c (_initialize_infcall): Remove trailing newline from
help.
* user-regs.c (_initialize_user_regs): Remove trailing newline
from help.
* typeprint.c (_initialize_typeprint): Remove trailing newline
from help.
* reverse.c (_initialize_reverse): Remove trailing newlines from
help.
* tracepoint.c (_initialize_tracepoint): Remove trailing newlines
from help.
* language.c (add_set_language_command): Remove trailing newline
from help.
* infcmd.c (_initialize_infcmd): Remove trailing newlines from
help.
* disasm.c (_initialize_disasm): Remove trailing newline from
help.
* top.c (init_main): Remove trailing newline from help.
* interps.c (_initialize_interpreter): Remove trailing newline
from help.
* btrace.c (_initialize_btrace): Remove trailing newlines from
help.
* breakpoint.c (_initialize_breakpoint): Remove trailing newline
from help.
* python/python.c (_initialize_python): Remove trailing newline
from help.
* spu-tdep.c (_initialize_spu_tdep): Remove trailing newlines from
help.
* tui/tui-win.c (_initialize_tui_win): Remove trailing newlines
from help. Reformat some text.
* tui/tui-stack.c (_initialize_tui_stack): Remove trailing newline
from help.
* tui/tui-layout.c (_initialize_tui_layout): Remove trailing
newline from help.
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
Since commit
b4be1b0648 ("Fix MI output for multi-location breakpoints")
we get this error when building with --disable-gdbmi:
CXXLD gdb
/home/smarchi/src/binutils-gdb/gdb/breakpoint.c:6358: error: undefined reference to 'mi_multi_location_breakpoint_output_fixed(ui_out*)'
This is due to breakpoint.c using a function defined in mi/mi-main.c, even
though mi/mi-main.c isn't included in the build.
To fix it, use the flags feature of ui_out. mi_ui_out has the new
fix_multi_location_breakpoint_output flag set for versions >= 3. Also,
move the global variable fix_multi_location_breakpoint_output to
breakpoint.c, so it can be read there even when we build without MI. I
renamed it to fix_multi_location_breakpoint_output_globally so it
doesn't clash with the new enumerator.
gdb/ChangeLog:
* breakpoint.h (fix_multi_location_breakpoint_output_globally):
New variable declaration.
* breakpoint.c (fix_multi_location_breakpoint_output_globally):
New variable.
(print_one_breakpoint): Use ui_out::test_flags and new global
variable to compute use_fixed_output.
* mi/mi-main.h (mi_multi_location_breakpoint_output_fixed):
Remove.
* mi/mi-main.c (fix_multi_location_breakpoint_output): Remove.
(mi_multi_location_breakpoint_output_fixed): Remove.
(mi_cmd_fix_multi_location_breakpoint_output): Adjust to set the
new variable.
* mi/mi-out.c (mi_ui_out::mi_ui_out): Set
fix_multi_location_breakpoint_output flag if version >= 3.
* ui-out.h (enum ui_out_flag)
<fix_multi_location_breakpoint_output>: New enumerator.
This changes breakpoint.c to use the type-safe registry API.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* breakpoint.c (breakpoint_objfile_key): Change type.
(get_breakpoint_objfile_data): Update.
(free_breakpoint_objfile_data): Remove.
(_initialize_breakpoint): Update.
This makes exception handling more efficient in a few spots, through
the use of const- and rvalue-references.
I wrote this patch by commenting out the gdb_exception copy
constructor and then examining the resulting error messages one by
one, introducing the use of std::move where appropriate.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (struct gdb_xml_parser) <set_error>: Take an
rvalue reference.
(gdb_xml_start_element_wrapper, gdb_xml_end_element_wrapper)
(gdb_xml_parser::parse): Use std::move.
* python/python-internal.h (gdbpy_convert_exception): Take a const
reference.
* python/py-value.c (valpy_getitem, valpy_nonzero): Use
std::move.
* python/py-utils.c (gdbpy_convert_exception): Take a const
reference.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Use std::move.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Use std::move.
* mi/mi-main.c (mi_print_exception): Take a const reference.
* main.c (handle_command_errors): Take a const reference.
* linespec.c (parse_linespec): Use std::move.
* infcall.c (run_inferior_call): Use std::move.
(call_function_by_hand_dummy): Use std::move.
* exec.c (try_open_exec_file): Use std::move.
* exceptions.h (exception_print, exception_fprintf)
(exception_print_same): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Change parameters to
const reference.
* event-top.c (gdb_rl_callback_read_char_wrapper): Update.
* common/new-op.c: Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
constructor.
(struct gdb_exception_error, struct gdb_exception_quit, struct
gdb_quit_bad_alloc): Change constructor to move constructor.
(throw_exception): Change parameter to rvalue reference.
* common/common-exceptions.c (throw_exception): Take rvalue
reference.
* cli/cli-interp.c (safe_execute_command): Use std::move.
* breakpoint.c (insert_bp_location, location_to_sals): Use
std::move.
Andrew Burgess