Add [-q] [-t TYPEREGEXP] [NAMEREGEXP] args to info [args|functions|locals|variables]
Main changes are:
* stack.c: Add two regexp preg and treg to print_variable_and_value_data
and used them inside do_print_variable_and_value to filter the
variables to print.
* symtab.h: Add a new function bool treg_matches_sym_type_name, that
factorises type matching logic.
* symtab.c: Add type/name matching logic to 'info functions|variables'.
* stack.c : Add type/name matching logic to 'info args|locals'.
gdb/ChangeLog
2018-10-27 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* stack.c (print_variable_and_value_data): Add preg and treg.
(print_frame_local_vars): Add quiet, regexp and t_regexp arguments,
and update callers.
(print_frame_arg_vars): Likewise.
(prepare_reg): New function.
(info_locals_command): Extract info print args and use them.
(info_args_command): Likewise.
(_initialize_stack): Modify on-line help.
* symtab.c (treg_matches_sym_type_name): New function.
(search_symbols): New arg t_regexp.
(symtab_symbol_info): New args quiet, regexp, t_regexp.
(info_variables_command): Extract info print args and use them.
(info_functions_command): Likewise.
(info_types_command): Update call to symtab_symbol_info.
(_initialize_symtab): Modify on-line help.
* symtab.h (treg_matches_sym_type_name): New function.
(search_symbols): New t_regexp arg.
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
The 'frame' command, and thanks to code reuse the 'info frame' and
'select-frame' commands, currently have an overloaded mechanism for
selecting a frame.
These commands take one or two parameters, if it's one parameter then
we first try to use the parameter as an integer to select a frame by
level (or depth in the stack). If that fails then we treat the
parameter as an address and try to select a stack frame by
stack-address. If we still have not selected a stack frame, or we
initially had two parameters, then GDB allows the user to view a stack
frame that is not part of the current backtrace. Internally, a new
frame is created with the given stack and pc addresses, and this is
shown to the user.
The result of this is that a typo by the user, entering the wrong stack
frame level for example, can result in a brand new frame being viewed
rather than an error.
The purpose of this commit is to remove this overloading, while still
offering the same functionality through some new sub-commands. By
making the default behaviour of 'frame' (and friends) be to select a
stack frame by level index, it is hoped that enough
backwards-compatibility is maintained that users will not be overly
inconvenienced.
The 'frame', 'select-frame', and 'info frame' commands now all take a
frame specification string as an argument, this string can be any of the
following:
(1) An integer. This is treated as a frame level. If a frame for
that level does not exist then the user gets an error.
(2) A string like 'level <LEVEL>', where <LEVEL> is a frame level
as in option (1) above.
(3) A string like 'address <STACK-ADDRESS>', where <STACK-ADDRESS>
is a stack-frame address. If there is no frame for this address
then the user gets an error.
(4) A string like 'function <NAME>', where <NAME> is a function name,
the inner most frame for function <NAME> is selected. If there is no
frame for function <NAME> then the user gets an error.
(5) A string like 'view <STACK-ADDRESS>', this views a new frame
with stack address <STACK-ADDRESS>.
(6) A string like 'view <STACK-ADDRESS> <PC-ADDRESS>', this views
a new frame with stack address <STACK-ADDRESS> and the pc <PC-ADDRESS>.
This change assumes that the most common use of the commands like
'frame' is to select a frame by frame level, it is for this reason
that this is the behaviour that is kept for backwards compatibility.
Any of the alternative behaviours, which are assumed to be less used,
now require a change in user behaviour.
The MI command '-stack-select-frame' has not been changed. This
ensures that we maintain backwards compatibility for existing
frontends.
gdb/ChangeLog:
(NEWS): Mention changes to frame related commands.
* cli/cli-decode.c (add_cmd_suppress_notification): New function.
(add_prefix_cmd_suppress_notification): New function.
(add_com_suppress_notification): Call
add_cmd_suppress_notification.
* command.h (add_cmd_suppress_notification): Declare.
(add_prefix_cmd_suppress_notification): Declare.
* mi/mi-cmd-stack.c: Add 'safe-ctype.h' include.
(parse_frame_specification): Moved from stack.c, with
simplification to handle a single argument.
(mi_cmd_stack_select_frame): Use parse_frame_specification, the
switch to the selected frame. Add a header comment.
* stack.c: Remove 'safe-ctype.h' include.
(find_frame_for_function): Add declaration.
(find_frame_for_address): New function.
(parse_frame_specification): Moved into mi/mi-cmd-stack.c.
(frame_selection_by_function_completer): New function.
(info_frame_command): Rename to...
(info_frame_command_core): ...this, and update parameter types.
(select_frame_command): Rename to...
(select_frame_command_core): ...this, and update parameter types.
(frame_command): Rename to...
(frame_command_core): ...this, and update parameter types.
(class frame_command_helper): New class to wrap implementations of
frame related sub-commands.
(frame_apply_cmd_list): New static global.
(frame_cmd_list): Make static.
(select_frame_cmd_list): New global for sub-commands.
(info_frame_cmd_list): New global for sub-commands.
(_initialize_stack): Register sub-commands for 'frame',
'select-frame', and 'info frame'. Update 'frame apply' commands
to use frame_apply_cmd_list. Move function local static
frame_apply_list to file static frame_apply_cmd_list for
consistency.
* stack.h (select_frame_command): Delete declarationn.
(select_frame_for_mi): Declare new function.
gdb/doc/ChangeLog:
* gdb.texinfo (Frames): Rewrite the description of 'frame number'
to highlight that the number is also the frame's level.
(Selection): Rewrite documentation for 'frame' and 'select-frame'
commands.
(Frame Info): Rewrite documentation for 'info frame' command.
gdb/testsuite/ChangeLog:
* gdb.base/frame-selection.exp: New file.
* gdb.base/frame-selection.c: New file.
This change/patch substitues BLOCK_ENTRY_PC for BLOCK_START in
places where BLOCK_START is used to obtain the address at which
execution should enter the block. Since blocks can now contain
non-contiguous ranges, the BLOCK_START - which is still be the
very lowest address in the block - might not be the same as
BLOCK_ENTRY_PC.
There is a change to infrun.c which is less obvious and less mechanical.
I'm posting it as a separate patch.
gdb/ChangeLog:
* ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of
BLOCK_START.
* blockframe.c (get_pc_function_start): Likewise.
* compile/compile-c-symbols.c (convert_one_symbol): Likewise.
(gcc_symbol_address): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (get_expr_block_and_pc): Likewise.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
(func_addr_to_tail_call_list): Likewise.
* findvar.c (default_read_var_value): Likewise.
* inline-frame.c (inline_frame_this_id): Likewise.
(skip-inline_frames): Likewise.
* infcmd.c (until_next_command): Likewise.
* linespec.c (convert_linespec_to_sals): Likewise.
* parse.c (parse_exp_in_context_1): Likewise.
* printcmd.c (build_address_symbolic): likewise.
(info_address_command): Likewise.
symtab.c (find_function_start_sal): Likewise.
(skip_prologue_sal): Likewise.
(find_function_alias_target): Likewise.
(find_gnu_ifunc): Likewise.
* stack.c (find_frame_funname): Likewise.
* symtab.c (fixup_symbol_section): Likewise.
(find_function_start_sal): Likewise.
(skip_prologue_sal): Likewsie.
(find_function_alias_target): Likewise.
(find_gnu_ifunc): Likewise.
* tracepoint.c (info_scope_command): Likewise.
* value.c (value_fn_field): Likewise.
When printing frames on an MI channel also print the frame
architecture like in:
(gdb)
-stack-list-frames 3 3
^done,stack=
[frame={level="3",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",
line="14",arch="i386:x86_64"}]
(gdb)
This is useful for MI clients that need to know the architecture in
order to perform further analysis, for example to use their own
disassembler to analyze machine code.
gdb/Changelog:
2018-08-22 Jan Vrany <jan.vrany@fit.cvut.cz>
* stack.c (print_frame): Print frame architecture when printing on
an MI output.
* NEWS: Mention new "arch" attribute in frame output.
gdb/testsuite/Changelog
2018-08-22 Jan Vrany <jan.vrany@fit.cvut.cz>
* lib/mi-support.exp (mi_expect_stop): Update regexp to
accommodate new "arch" field in frame output.
* gdb.mi/mi-return.exp: Likewise.
* gdb.mi/mi-stack.exp: Likewise.
* gdb.mi/mi-syn-frame.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
gdb/doc/Changelog
2018-08-22 Jan Vrany <jan.vrany@fit.cvut.cz>
* gdb.texinfo (The -stack-list-frames Command): Update description
to mention "arch".
Update MI examples throughout the document to contain "arch" in
frame output.
Implement frame apply [all | COUNT | -COUNT | level LEVEL... ] [FLAG]... COMMAND.
Also implement the command 'faas COMMAND', a shortcut for
'frame apply all -s COMMAND'.
The syntax of 'frame apply' to specify some innermost or outermost
frames is similar to 'backtrace' command, using COUNT or -COUNT.
To apply a COMMAND to a more specific set of frames, the following
new command and syntax can be used:
frame apply level LEVEL... [FLAG]... COMMAND
where LEVEL is one or more frame levels or range of frame levels.
The new command 'frame apply' allows to apply a COMMAND to a number of frames,
or to all frames, or to a set of frames.
The optional [FLAG]... arguments allow to control what output to produce
and how to handle errors raised when applying COMMAND to a frame.
Some example usages for this new command:
frame apply all info frame
Produce info frame for all frames.
frame apply all p $sp
For each frame, print the location, followed by the frame sp.
frame apply all -q p $sp
Same as before, but -q flag (q = quiet) indicates to only print
the frames sp.
frame apply all p some_local_var_somewhere
Print some_local_var_somewhere in all frames. 'frame apply'
will abort as soon as the print command fails.
frame apply all -c p some_local_var_somewhere
Same as before, but -c flag (c = continue) means to
print the error and continue applying command in case the
print command fails.
frame apply all -s p some_local_var_somewhere
Same as before, but -s flag (s = silent) means to
be silent for frames where the print command fails.
In other words, this allows to 'search' the frame in which
some_local_var_somewhere can be printed.
frame apply all -s -q p some_local_var_somewhere
Same as before, but does not print the frame info in which
the variable is found.
frame apply level 2-4 5 8-10 -s p i = i + 1
Increments i in the identified frames.
gdb/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* stack.c: (trailing_outermost_frame): New function, mostly
extracted from backtrace_command_1.
(leading_innermost_frame): New function.
(backtrace_command_1): Update to call trailing_outermost_frame.
(frame_apply_command_count): New function.
(frame_apply_level_command): New function.
(frame_apply_all_command): New function.
(frame_apply_command): New function.
(faas_command): New function.
(frame_cmd_list): New variable.
(_initialize_stack): Update to setup the new commands 'frame apply'
and 'faas'.
In my earlier series to change help text to follow the GNU standards
for metasyntactic variables, I missed one: the "func" command. This
patch updates its help text.
Tested by the buildbot.
gdb/ChangeLog
2018-06-27 Tom Tromey <tom@tromey.com>
* stack.c (_initialize_stack): Update "func" help text.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
The func_command function is used to emulate the dbx 'func' command.
However, finding a stack frame based on function name might be a useful
feature, and so the core of func_command is now split out into a
separate function.
gdb/ChangeLog:
* stack.c (select_and_print_frame): Delete.
(struct function_bounds): Move struct within function.
(func_command): Most content moved into new function
find_frame_for_function, use new function, print result, add
function comment.
(find_frame_for_function): New function, now returns a result.
iterate_over_block_arg_vars is a void function, so does
not return 1 or 0.
print_frame_arg_vars tells it prints on STREAM,
so pass STREAM in the cb_data, not gdb_stdout.
gdb/ChangeLog
2018-05-24 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* stack.c (iterate_over_block_arg_vars): Fix comment.
(print_frame_arg_vars): Pass stream in cb_data, not gdb_stdout.
PR gdb/23203 reports 'bt full' causing the currently selected frame to
change, this issue is fixed in this commit.
Add a new class scoped_restore_selected_frame that saves and restores
the selected frame. Make use of this in print_frame_local_vars to
restore the selected frame on exit.
gdb/ChangeLog:
PR gdb/23203
* frame.c
(scoped_restore_selected_frame::scoped_restore_selected_frame):
Define.
(scoped_restore_selected_frame::~scoped_restore_selected_frame):
Define.
* frame.h (class scoped_restore_selected_frame): New class.
* stack.c (print_frame_local_vars): Remove catching and rethrowing
of any exception, use scoped_restore_selected_frame to restore the
frame instead.
gdb/testsuite/ChangeLog:
PR gdb/23203
* gdb.base/bt-selected-frame.c: New file.
* gdb.base/bt-selected-frame.exp: New file.
* lib/gdb.exp (get_current_frame_number): New function.
struct value is internally reference counted and so, while it also has
some ownership rules unique to it, it makes sense to use a gdb_ref_ptr
when managing it automatically.
This patch removes the existing unique_ptr specialization in favor of
a reference-counted pointer. It also introduces two other
clarifications:
1. Rename value_free to value_decref, which I think is more in line
with what the function actually does; and
2. Change release_value to return a gdb_ref_ptr. This change allows
us to remove the confusing release_value_or_incref function,
primarily by making it much simpler to reason about the result of
release_value.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_clear_saved_item)
(update_dynamic_varobj_children, install_new_value, ~varobj):
Update.
* value.h (value_incref): Move declaration earlier.
(value_decref): Rename from value_free.
(struct value_ref_policy): New.
(value_ref_ptr): New typedef.
(struct value_deleter): Remove.
(gdb_value_up): Remove typedef.
(release_value): Change return type.
(release_value_or_incref): Remove.
* value.c (set_value_parent): Update.
(value_incref): Change return type.
(value_decref): Rename from value_free.
(value_free_to_mark, free_all_values, free_value_chain): Update.
(release_value): Return value_ref_ptr.
(release_value_or_incref): Remove.
(record_latest_value, set_internalvar, clear_internalvar):
Update.
* stack.c (info_frame_command): Don't call value_free.
* python/py-value.c (valpy_dealloc, valpy_new)
(value_to_value_object): Update.
* printcmd.c (do_examine): Update.
* opencl-lang.c (lval_func_free_closure): Update.
* mi/mi-main.c (register_changed_p): Don't call value_free.
* mep-tdep.c (mep_frame_prev_register): Don't call value_free.
* m88k-tdep.c (m88k_frame_prev_register): Don't call value_free.
* m68hc11-tdep.c (m68hc11_frame_prev_register): Don't call
value_free.
* guile/scm-value.c (vlscm_free_value_smob)
(vlscm_scm_from_value): Update.
* frame.c (frame_register_unwind, frame_unwind_register_signed)
(frame_unwind_register_unsigned, get_frame_register_bytes)
(put_frame_register_bytes): Don't call value_free.
* findvar.c (address_from_register): Don't call value_free.
* dwarf2read.c (dwarf2_compute_name): Don't call value_free.
* dwarf2loc.c (entry_data_value_free_closure)
(value_of_dwarf_reg_entry, free_pieced_value_closure)
(dwarf2_evaluate_loc_desc_full): Update.
* breakpoint.c (update_watchpoint, breakpoint_init_inferior)
(~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
(~watchpoint, watch_command_1)
(invalidate_bp_value_on_memory_change): Update.
* alpha-tdep.c (alpha_register_to_value): Don't call value_free.
In https://sourceware.org/ml/gdb-patches/2017-06/msg00741.html,
Pedro asks:
> Doesn't the "info verbose on" bit affect frame filters too?
The answer is that yes, it could. However, it's not completely
effective, because the C code can't guess how many frames might need
to be unwound to satisfy the request -- a frame filter will request as
many frames as it needs.
Also, I tried removing this code from backtrace, and I think the
result is better without it. In particular, now the expansion line
occurs just before the frame that caused the expansion, like:
(gdb) bt no-filters
#0 0x00007ffff576cecd in poll () from /lib64/libc.so.6
Reading in symbols for ../../binutils-gdb/gdb/event-loop.c...done.
#1 0x00000000007ecc33 in gdb_wait_for_event (block=1)
at ../../binutils-gdb/gdb/event-loop.c:772
#2 0x00000000007ec006 in gdb_do_one_event ()
at ../../binutils-gdb/gdb/event-loop.c:347
#3 0x00000000007ec03e in start_event_loop ()
at ../../binutils-gdb/gdb/event-loop.c:371
Reading in symbols for ../../binutils-gdb/gdb/main.c...done.
#4 0x000000000086693d in captured_command_loop (
Reading in symbols for ../../binutils-gdb/gdb/exceptions.c...done.
data=0x0) at ../../binutils-gdb/gdb/main.c:325
So, I am proposing this patch to simply remove this code.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command_1): Remove verbose code.
This improves help text in stack.c in two ways. First, it removes
trailing newlines from various help strings. I think these are never
needed. Second, it adds a "Usage" line to the "backtrace" text, as
suggested by Pedro.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* stack.c (_initialize_stack): Remove trailing newlines from help
text. Add "Usage" line to "backtrace" help.
PR backtrace/15584 notes that some code in backtrace_command_1 is not
useful when frame filters are in use. This patch moves this code into
the no-frame-filters "if". This also removes the unused local
"trailing_level", which I noticed while moving the code around.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15584:
* stack.c (backtrace_command_1): Move some code into no-filters
"if".
When a frame filter elides some frames, they are still printed by
"bt", indented a few spaces. PR backtrace/15582 notes that it would
be nice for users if elided frames could simply be dropped. This
patch adds this capability.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* stack.c (backtrace_command): Parse "hide" argument.
* python/py-framefilter.c (py_print_frame): Handle PRINT_HIDE.
* extension.h (enum frame_filter_flags) <PRINT_HIDE>: New
constant.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.texinfo (Backtrace): Mention "hide" argument.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.python/py-framefilter.exp: Add "bt hide" test.
The next patch will add more flags to backtrace_command_1; and rather
than add another boolean argument, this patch changes it to accept a
flags value.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command_1): Remove "show_locals" parameter,
add "flags".
(backtrace_command): Remove "fulltrace", add "flags".
The backtrace command has peculiar command-line parsing. In
particular, it splits the command line, then loops over the arguments.
If it sees a word it recognizes, like "full", it effectively drops
this word from the argument vector. Then, it pastes together the
remaining arguments, passing them on to backtrace_command_1, which in
turn passes the resulting string to parse_and_eval_long.
The documentation doesn't mention the parse_and_eval_long at all, so
it is a bit of a hidden feature that you can "bt 3*2". The strange
algorithm above also means you can "bt 3 * no-filters 2" and get 6
frames...
This patch changes backtrace's command line parsing to be a bit more
rational. Now, special words like "full" are only recognized at the
start of the command.
This also updates the documentation to describe the various bt options
individually.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command): Rewrite command line parsing.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Backtrace): Describe options individually.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
This changes frame_filter_flags to use DEF_ENUM_FLAGS_TYPE, and
updates all the uses. It also changes the enum constants to use <<,
as suggested by Sergio.
ChangeLog
2018-02-26 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command_1): Update.
* python/python-internal.h (gdbpy_apply_frame_filter): Change type
of "flags".
* python/py-framefilter.c (py_print_frame)
(gdbpy_apply_frame_filter): Change type of "flags".
* mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): Change type
of "flags".
(mi_cmd_stack_list_frames, mi_cmd_stack_list_locals)
(mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Update.
* extension.h (enum frame_filter_flag): Rename from
frame_filter_flags.
(frame_filter_flags): Define using DEF_ENUM_FLAGS_TYPE.
(apply_ext_lang_frame_filter): Change type of "flags".
* extension.c (apply_ext_lang_frame_filter): Change type of
"flags".
* extension-priv.h (struct extension_language_ops)
<apply_frame_filter>: Change type of "flags".
PR python/16497 notes that using "bt" with a positive argument prints
the wrong number of frames when a frame filter is in use. Also, in this
case, the non-frame-filter path will print a message about "More stack
frames" when there are more; but this is not done in the frame-filter
case.
The first problem is that backtrace_command_1 passes the wrong value
to apply_ext_lang_frame_filter -- that function takes the final
frame's number as an argument, but backtrace_command_1 passes the
count, which is off by one.
The solution to the second problem is to have the C stack-printing
code stop at the correct number of frames and then print the message.
Tested using the buildbot.
ChangeLog
2018-02-26 Tom Tromey <tom@tromey.com>
PR python/16497:
* stack.c (backtrace_command_1): Set PRINT_MORE_FRAMES flag. Fix
off-by-one in py_end computation.
* python/py-framefilter.c (gdbpy_apply_frame_filter): Handle
PRINT_MORE_FRAMES.
* extension.h (enum frame_filter_flags) <PRINT_MORE_FRAMES>: New
constant.
2018-02-26 Tom Tromey <tom@tromey.com>
PR python/16497:
* gdb.python/py-framefilter.exp: Update test.
At <https://sourceware.org/ml/gdb-patches/2017-12/msg00298.html>, Joel
wrote:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Consider the following code which first declares a tagged type (the
equivalent of a class in Ada), and then a procedure which takes a
pointer (access) to this type's 'Class.
package Pck is
type Top_T is tagged record
N : Integer := 1;
end record;
procedure Inspect (Obj: access Top_T'Class);
end Pck;
Putting a breakpoint in that procedure and then running to it triggers
an internal error:
(gdb) break inspect
(gdb) continue
Breakpoint 1, pck.inspect (obj=0x63e010
/[...]/gdb/stack.c:621: internal-error: void print_frame_args(symbol*, frame_info*, int, ui_file*): Assertion `nsym != NULL' failed.
What's special about this subprogram is that it takes an access to
what we call a 'Class type, and for implementation reasons, the
compiler adds an extra argument named "objL". If you are curious why,
it allows the compiler for perform dynamic accessibility checks that
are mandated by the language.
If we look at the location where we get the internal error (in
stack.c), we find that we are looping over the symbol of each
parameter, and for each parameter, we do:
/* We have to look up the symbol because arguments can have
two entries (one a parameter, one a local) and the one we
want is the local, which lookup_symbol will find for us.
[...]
nsym = lookup_symbol (SYMBOL_LINKAGE_NAME (sym),
b, VAR_DOMAIN, NULL).symbol;
gdb_assert (nsym != NULL);
The lookup_symbol goes through the lookup structure, which means the
symbol's linkage name ("objL") gets transformed into a
lookup_name_info object (in block_lookup_symbol), before it gets fed
to the block symbol dictionary iterators. This, in turn, triggers the
symbol matching by comparing the "lookup" name which, for Ada, means
among other things, lowercasing the given name to "objl". It is this
transformation that causes the lookup find no matches, and therefore
trip this assertion.
Going back to the "offending" call to lookup_symbol in stack.c, what
we are trying to do, here, is do a lookup by linkage name. So, I
think what we mean to be doing is a completely literal symbol lookup,
so maybe not even strcmp_iw, but actually just plain strcmp???
In the past, in practice, you could get that effect by doing a lookup
using the C language. But that doesn't work, because we still end up
somehow using Ada's lookup_name routine which transforms "objL".
So, ideally, as I hinted before, I think what we need is a way to
perform a literal lookup so that searches by linkage names like the
above can be performed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This commit fixes the problem by implementing something similar to
Joel's literal idea, but with some important differences.
I considered adding a symbol_name_match_type::LINKAGE and supporting
searching by linkage name for any language, but the problem with that
is that the dictionaries only work with SYMBOL_SEARCH_NAME, because
that's what is used for hashing. We'd need separate dictionaries for
hashed linkage names.
So with the current symbol tables infrastructure, it's not literal
linkage names that we want to pass down, but instead literal _search_
names (SYMBOL_SEARCH_NAME, etc.).
However, psymbols have no overload/function parameter info in C++, so
a straight strcmp doesn't work properly for C++ name matching.
So what we do is be a little less aggressive then and add a new
symbol_name_match_type::SEARCH_SYMBOL instead that takes as input a
non-user-input search symbol, and then we skip any decoding/demangling
steps and make:
- Ada treat that as a verbatim match,
- other languages treat it as symbol_name_match_type::FULL.
This also fixes the new '"maint check-psymtabs" for Ada' testcase for
me (gdb.ada/maint_with_ada.exp). I've not removed the kfail yet
because Joel still sees that testcase failing with this patch.
That'll be fixed in follow up patches.
gdb/ChangeLog:
2018-01-05 Pedro Alves <palves@redhat.com>
PR gdb/22670
* ada-lang.c (literal_symbol_name_matcher): New function.
(ada_get_symbol_name_matcher): Use it for
symbol_name_match_type::SEARCH_NAME.
* block.c (block_lookup_symbol): New parameter 'match_type'. Pass
it down instead of assuming symbol_name_match_type::FULL.
* block.h (block_lookup_symbol): New parameter 'match_type'.
* c-valprint.c (print_unpacked_pointer): Use
lookup_symbol_search_name instead of lookup_symbol.
* compile/compile-object-load.c (get_out_value_type): Pass down
symbol_name_match_type::SEARCH_NAME.
* cp-namespace.c (cp_basic_lookup_symbol): Pass down
symbol_name_match_type::FULL.
* cp-support.c (cp_get_symbol_name_matcher): Handle
symbol_name_match_type::SEARCH_NAME.
* infrun.c (insert_exception_resume_breakpoint): Use
lookup_symbol_search_name.
* p-valprint.c (pascal_val_print): Use lookup_symbol_search_name.
* psymtab.c (maintenance_check_psymtabs): Use
symbol_name_match_type::SEARCH_NAME and SYMBOL_SEARCH_NAME.
* stack.c (print_frame_args): Use lookup_symbol_search_name and
SYMBOL_SEARCH_NAME.
* symtab.c (lookup_local_symbol): Don't demangle the lookup name
if symbol_name_match_type::SEARCH_NAME.
(lookup_symbol_in_language): Pass down
symbol_name_match_type::FULL.
(lookup_symbol_search_name): New.
(lookup_language_this): Pass down
symbol_name_match_type::SEARCH_NAME.
(lookup_symbol_aux, lookup_local_symbol): New parameter
'match_type'. Pass it down.
* symtab.h (symbol_name_match_type::SEARCH_NAME): New enumerator.
(lookup_symbol_search_name): New declaration.
(lookup_symbol_in_block): New 'match_type' parameter.
gdb/testsuite/ChangeLog:
2018-01-05 Joel Brobecker <brobecker@adacore.com>
PR gdb/22670
* gdb.ada/access_tagged_param.exp: New file.
* gdb.ada/access_tagged_param/foo.adb: New file.
Currently, optimized out variables are not shown when doing "info
locals". Some users found that confusing, thinking GDB forgot to print
their variable. This patch adds them to the "info locals" output. I
added a test in gdb.dwarf2 to test for that behavior. I think doing a
synthetic DWARF test is the easiest way to have an optimized out local
variable for sure.
However, this change reveals what I think is a bug in GDB, see:
http://lists.dwarfstd.org/pipermail/dwarf-discuss-dwarfstd.org/2017-September/004394.html
This patch marks the tests in inline-locals.exp that start failing as
KFAIL. I'd like to tackle this bug eventually, but I don't have the
time right now. I think it's still better to show an extra erroneous
entry than to not show the optimized out variables at all. I haven't
created a bug in bugzilla yet, but if we agree it's indeed a bug, I'll
create one and update the setup_kfail lines with the actual bug number
before pushing.
gdb/ChangeLog:
* stack.c (iterate_over_block_locals): Add LOC_OPTIMIZED_OUT
case in switch.
gdb/testsuite/ChangeLog:
* gdb.opt/inline-locals.exp: Mark tests as KFAIL.
* gdb.dwarf2/info-locals-optimized-out.exp: New file.
* gdb.dwarf2/info-locals-optimized-out.c: New file.
This removes a cleanup from backtrace_command, replacing it with
std::string. This patch temporarily changes backtrace_command so that
the parameter is named "args_in" and is immediately constified; this
is fixed again in the constification patch.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* stack.c (backtrace_command): Use std::string.
(backtrace_command_1): Make "count_exp" const.
This constifies add_com_suppress_notification and fixes the one
caller.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* stack.c (select_frame_command): Constify.
* cli/cli-decode.c (add_com_suppress_notification): Constify.
* command.h (add_com_suppress_notification): Constify.
Use the type system instead of callers needing to know how the
returned string's memory is supposed to be managed.
gdb/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
* cp-support.c (cp_remove_params): Return a gdb::unique_xmalloc_ptr.
Use bool.
(overload_list_add_symbol): Adjust to use gdb::unique_xmalloc_ptr.
* cp-support.h (cp_remove_params): Now returns a
gdb::unique_xmalloc_ptr.
* dwarf2read.c (find_slot_in_mapped_hash): Now returns bool.
Adjust to cp_remove_params returning a gdb::unique_xmalloc_ptr.
* psymtab.c (psymtab_search_name): Adjust to cp_remove_params
returning a gdb::unique_xmalloc_ptr.
(lookup_partial_symbol): Adjust to use gdb::unique_xmalloc_ptr.
* stack.c (find_frame_funname): Adjust to cp_remove_params
returning a gdb::unique_xmalloc_ptr.
This removes some cleanups from stack.c by using std::string or
gdb::unique_xmalloc_ptr. One cleanup remains in this file; I did not
remove it here because it is handled in another patch series that has
yet to be resolved.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* stack.c (parse_frame_specification): Use std::string
(info_frame_command): Use gdb::unique_xmalloc_ptr.
This changes find_frame_funname to return a unique_xmalloc_ptr and
then fixes up the callers. This removes several cleanups.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* ada-lang.c (is_known_support_routine): Update.
(ada_unhandled_exception_name_addr_from_raise): Update.
* guile/scm-frame.c (gdbscm_frame_name): Update.
* python/py-frame.c (frapy_name): Update.
(frapy_function): Update.
* stack.h (find_frame_funname): Update.
* stack.c (find_frame_funname): Return unique_xmalloc_ptr.
(print_frame): Update.
This renames a few functions -- skip_spaces_const,
skip_to_space_const, get_number_const, extract_arg_const -- to drop
the "_const" suffix and instead rely on overloading.
This makes future const fixes simpler by reducing the number of lines
that must be changed. I think it is also not any less clear, as all
these functions have the same interface as their non-const versions by
design. Furthermore there's an example of using an overload in-tree
already, namely check_for_argument.
This patch was largely created using some perl one-liners; then a few
fixes were applied by hand.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* common/common-utils.h (skip_to_space): Remove macro, redeclare
as function.
(skip_to_space): Rename from skip_to_space_const.
* common/common-utils.c (skip_to_space): New function.
(skip_to_space): Rename from skip_to_space_const.
* cli/cli-utils.h (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
* cli/cli-utils.c (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
(number_or_range_parser::get_number): Use ::get_number.
* aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c,
break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c,
cli/cli-script.c, cli/cli-setshow.c, compile/compile.c,
completer.c, demangle.c, disasm.c, findcmd.c, linespec.c,
linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c,
minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c,
python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c,
stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.
This changes func_command to use gdb::def_vector, removing a cleanup.
ChangeLog
2017-09-09 Tom Tromey <tom@tromey.com>
* stack.c (func_command): Use gdb::def_vector.
This changes more places to use ui_out_emit_tuple, removing cleanups.
ChangeLog
2017-09-09 Tom Tromey <tom@tromey.com>
* target.c (flash_erase_command): Use ui_out_emit_tuple.
* stack.c (print_frame): Use ui_out_emit_tuple.
* spu-tdep.c (info_spu_event_command): Use ui_out_emit_tuple.
(info_spu_mailbox_command, info_spu_dma_command)
(info_spu_proxydma_command): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Use
ui_out_emit_tuple, gdb::byte_vector, bin2hex.
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Use
ui_out_emit_tuple.
* breakpoint.c (print_it_watchpoint): Use ui_out_emit_tuple.
Instead, make symtab_and_line initialize its members itself. Many
symtab_and_line declarations are moved to where the object is
initialized at the same time both for clarity and to avoid double
initialization. A few functions, like e.g., find_frame_sal are
adjusted to return the sal using normal function return instead of an
output parameter likewise to avoid having to default-construct a sal
and then immediately have the object overwritten.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ada-lang.c (is_known_support_routine): Move sal declaration to
where it is initialized.
* breakpoint.c (create_internal_breakpoint, init_catchpoint)
(parse_breakpoint_sals, decode_static_tracepoint_spec)
(clear_command, update_static_tracepoint): Remove init_sal
references. Move declarations closer to initializations.
* cli/cli-cmds.c (list_command): Move sal declarations closer to
initializations.
* elfread.c (elf_gnu_ifunc_resolver_stop): Remove init_sal
references. Move sal declarations closer to initializations.
* frame.c (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter. Remove init_sal references.
* frame.h (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter.
* guile/scm-frame.c (gdbscm_frame_sal): Adjust.
* guile/scm-symtab.c (stscm_make_sal_smob): Use in-place new
instead of memset.
(gdbscm_find_pc_line): Remove init_sal reference.
* infcall.c (call_function_by_hand_dummy): Remove init_sal
references. Move declarations closer to initializations.
* infcmd.c (set_step_frame): Update. Move declarations closer to
initializations.
(finish_backward): Remove init_sal references. Move declarations
closer to initializations.
* infrun.c (process_event_stop_test, handle_step_into_function)
(insert_hp_step_resume_breakpoint_at_frame)
(insert_step_resume_breakpoint_at_caller): Likewise.
* linespec.c (create_sals_line_offset, decode_digits_ordinary)
(symbol_to_sal): Likewise.
* probe.c (parse_probes_in_pspace): Remove init_sal reference.
* python/py-frame.c (frapy_find_sal): Move sal declaration closer
to its initialization.
* reverse.c (save_bookmark_command): Use new/delete. Remove
init_sal references. Move declarations closer to initializations.
* source.c (get_current_source_symtab_and_line): Remove brace
initialization.
(set_current_source_symtab_and_line): Now takes the sal by const
reference. Remove brace initialization.
(line_info): Remove init_sal reference.
* source.h (set_current_source_symtab_and_line): Now takes a
symtab_and_line via const reference.
* stack.c (set_current_sal_from_frame): Adjust.
(print_frame_info): Adjust.
(get_last_displayed_sal): Return the sal via function return
instead of via output parameter. Simplify.
(frame_info): Adjust.
* stack.h (get_last_displayed_sal): Return the sal via function
return instead of via output parameter.
* symtab.c (init_sal): Delete.
(find_pc_sect_line): Remove init_sal references. Move
declarations closer to initializations.
(find_function_start_sal): Remove init_sal references. Move
declarations closer to initializations.
* symtab.h (struct symtab_and_line): In-class initialize all
fields.
* tracepoint.c (set_traceframe_context)
(print_one_static_tracepoint_marker): Remove init_sal references.
Move declarations closer to initializations.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Adjust.
* tui/tui-stack.c (tui_show_frame_info): Adjust. Move
declarations closer to initializations.
* tui/tui-winsource.c (tui_update_source_window_as_is): Remove
init_sal references. Adjust.
This replaces "struct symtabs_and_lines" with
std::vector<symtab_and_line> in most cases. This removes a number of
cleanups.
In some cases, the sals objects do not own the sals they point at.
Instead they point at some sal that lives on the stack. Typically
something like this:
struct symtab_and_line sal;
struct symtabs_and_lines sals;
// fill in sal
sals.nelts = 1;
sals.sals = &sal;
// use sals
Instead of switching those cases to std::vector too, such usages are
replaced by gdb::array_view<symtab_and_line> instead. This avoids
introducing heap allocations.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Use range-for.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* breakpoint.c: Include "common/array-view.h".
(init_breakpoint_sal, create_breakpoint_sal): Change sals
parameter from struct symtabs_and_lines to
array_view<symtab_and_line>. Adjust. Use range-for. Update.
(breakpoint_sals_to_pc): Change sals parameter from struct
symtabs_and_lines to std::vector reference.
(check_fast_tracepoint_sals): Change sals parameter from struct
symtabs_and_lines to std::array_view. Use range-for.
(decode_static_tracepoint_spec): Return a std::vector instead of
symtabs_and_lines. Update.
(create_breakpoint): Update.
(break_range_command, until_break_command, clear_command): Update.
(base_breakpoint_decode_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location)
(bkpt_probe_decode_location, tracepoint_decode_location)
(tracepoint_probe_decode_location)
(strace_marker_create_sals_from_location): Return a std::vector
instead of symtabs_and_lines.
(strace_marker_create_breakpoints_sal): Update.
(strace_marker_decode_location): Return a std::vector instead of
symtabs_and_lines. Update.
(update_breakpoint_locations): Change struct symtabs_and_lines
parameters to gdb::array_view. Adjust.
(location_to_sals): Return a std::vector instead of
symtabs_and_lines. Update.
(breakpoint_re_set_default): Use std::vector instead of struct
symtabs_and_lines.
(decode_location_default): Return a std::vector instead of
symtabs_and_lines. Update.
* breakpoint.h: Include "common/array-view.h".
(struct breakpoint_ops) <decode_location>: Now returns a
std::vector instead of returning a symtabs_and_lines via output
parameter.
(update_breakpoint_locations): Change sals parameters to use
gdb::array_view.
* cli/cli-cmds.c (edit_command, list_command): Update to use
std::vector and gdb::array_view.
(ambiguous_line_spec): Adjust to use gdb::array_view and
range-for.
(compare_symtabs): Rename to ...
(cmp_symtabs): ... this. Change parameters to symtab_and_line
const reference and adjust.
(filter_sals): Rewrite using std::vector and standard algorithms.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify.
(jump_command): Update to use std::vector.
* linespec.c (struct linespec_state) <canonical_names>: Update
comment.
(add_sal_to_sals_basic): Delete.
(add_sal_to_sals, filter_results, convert_results_to_lsals)
(decode_line_2, create_sals_line_offset)
(convert_address_location_to_sals, convert_linespec_to_sals)
(convert_explicit_location_to_sals, parse_linespec)
(event_location_to_sals, decode_line_full, decode_line_1)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc)
(decode_digits_list_mode, decode_digits_ordinary, minsym_found)
(linespec_result::~linespec_result): Adjust to use std::vector
instead of symtabs_and_lines.
* linespec.h (linespec_sals::sals): Now a std::vector.
(struct linespec_result): Use std::vector, bool, and in-class
initialization.
(decode_line_1, decode_line_with_current_source)
(decode_line_with_last_displayed): Return std::vector.
* macrocmd.c (info_macros_command): Use std::vector.
* mi/mi-main.c (mi_cmd_trace_find): Use std::vector.
* probe.c (parse_probes_in_pspace, parse_probes): Adjust to use
std::vector.
* probe.h (parse_probes): Return a std::vector.
* python/python.c (gdbpy_decode_line): Use std::vector and
gdb::array_view.
* source.c (select_source_symtab, line_info): Use std::vector.
* stack.c (func_command): Use std::vector.
* symtab.h (struct symtabs_and_lines): Delete.
* tracepoint.c (tfind_line_command, scope_info): Use std::vector.
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
This changes some spots to use ui_out_emit_list. This only touches
"easy" cases, where the cleanup was used in a block-structured way.
There's also one more use of ui_out_emit_tuple in here.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Use
ui_out_emit_list.
* stack.c (print_frame): Use ui_out_emit_list.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_list.
* mi/mi-main.c (print_one_inferior)
(mi_cmd_data_list_register_names)
(mi_cmd_data_list_register_values, mi_cmd_list_features)
(mi_cmd_list_target_features, mi_cmd_trace_frame_collected): Use
ui_out_emit_list.
* mi/mi-interp.c (mi_on_normal_stop_1): Use ui_out_emit_list.
(mi_output_solib_attribs): Use ui_out_emit_list,
ui_out_emit_tuple.
* mi/mi-cmd-var.c (varobj_update_one): Use ui_out_emit_list.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_list_args, list_args_or_locals): Use
ui_out_emit_list.
* disasm.c (do_assembly_only): Use ui_out_emit_list.
* breakpoint.c (print_solib_event, output_thread_groups): Use
ui_out_emit_list.
This patch adds a few more uses of ui_out_emit_tuple. In these cases
a slightly more complicated change was needed. This also adds
annotate_arg_emitter, for use in stack.c, to avoid having to introduce
a new scope and reindent the code for a single call.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* stack.c (print_frame_arg): Use ui_out_emit_tuple,
annotate_arg_emitter.
* breakpoint.c (print_mention_watchpoint)
(print_mention_masked_watchpoint): Use ui_out_emit_tuple.
* annotate.h (struct annotate_arg_emitter): New.
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
Philippe Waroquiers