Running any program twice on Windows current results in GDB crashing:
$ gdb -q any_program
(gdb) run
$ gdb dummy -batch -ex run -ex run
[New Thread 684960.0xe5878]
[New Thread 684960.0xd75ac]
[New Thread 684960.0xddac8]
[New Thread 684960.0xc1f50]
[Thread 684960.0xd75ac exited with code 0]
[Thread 684960.0xddac8 exited with code 0]
[Thread 684960.0xc1f50 exited with code 0]
[Inferior 1 (process 684960) exited normally]
(gdb) run
Segmentation fault
The crash happens while processing the CREATE_PROCESS_DEBUG_EVENT
for the second run; in particular, we have in get_windows_debug_event:
| case CREATE_PROCESS_DEBUG_EVENT:
| [...]
| if (main_thread_id)
| windows_delete_thread (ptid_t (current_event.dwProcessId, 0,
| main_thread_id),
| 0);
The problem is that main_thread_id is the TID of the main thread from
the *previous* inferior, and this code is trying to delete that
thread. The problem is that it is constructing a PTID by pairing
the TID of the previous inferior with the PID of the new inferior.
As a result, when we dig inside windows_delete_thread to see
how it would handle that, we see...
| delete_thread (find_thread_ptid (ptid));
Since the PTID is bogus, we end up calling delete_thread with
a NULL thread_info. It used to be harmless, turning the delete_thread
into a nop, but the following change...
| commit 0803633106
| Date: Thu Nov 22 16:09:14 2018 +0000
| Subject: Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
... changed delete_thread to get the list of threads from
the inferior, which itself is now accessed via the given
thread_info. This is the corresponding diff that shows the change:
| - for (tp = thread_list; tp; tpprev = tp, tp = tp->next)
| + for (tp = thr->inf->thread_list; tp; tpprev = tp, tp = tp->next)
As a result of this, passing a NULL thread_info is no longer
an option!
Stepping back a bit, the reason behind deleting the thread late
could be found in a patch from Dec 2003, which laconically explains:
| commit 87a45c9606
| Date: Fri Dec 26 00:39:04 2003 +0000
|
| * win32-nat.c (get_child_debug_event): Keep main thread id around
| even after thread exits since Windows insists on continuing to
| report events against it.
A look at the gdb-patches archives did not provide any additional
clues (https://www.sourceware.org/ml/gdb-patches/2003-12/msg00478.html).
It is not clear whether this is still needed or not. This patch
assumes that whatever isue there was, the versions of Windows
we currently support no longer have it.
With that in mind, this commit fixes the issue by deleting the thread
when the inferior sends the exit-process event as opposed to deleting it
later, while starting a new inferior.
This also restores the printing of the thread-exit notification for
the main thread, which was missing before. Looking at the transcript
of the example shown above, we can see 4 thread creation notifications,
and only 3 notifications for thread exits. Now creation and exit
notifications are balanced.
In the handling of EXIT_THREAD_DEBUG_EVENT, the main_thread_id
check is removed because deemed unnecessary: The main thread was
introduced by a CREATE_PROCESS_DEBUG_EVENT, and thus the kernel
is expected to report its death via EXIT_PROCESS_DEBUG_EVENT.
And finally, because the behavior of delete_thread did change
(albeit when getting a value we probably never expected to receive),
this patch also adds a gdb_assert. The purpose is to provide some
immediate information in case there are other callers that mistakenly
call delete_thread with a NULL thread info. This can be useful
information when direct debugging of GDB isn't an option.
gdb/ChangeLog:
* thread.c (delete_thread_1): Add gdb_assert that THR is not
NULL. Initialize tpprev to NULL instead of assigning it
to NULL on the next statement.
* windows-nat.c (windows_delete_thread): Remove check for
main_thread_id before printing thread exit notifications.
(get_windows_debug_event) <EXIT_THREAD_DEBUG_EVENT>:
Remove thread ID check against main_thread_id.
<CREATE_PROCESS_DEBUG_EVENT>: Remove call to
windows_delete_thread.
<EXIT_PROCESS_DEBUG_EVENT>: Add call to windows_delete_thread.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
Enhance 'thread apply' command to also accept [FLAG]... arguments.
An example usage for this new argument:
thread apply all -s frame apply all -s p some_local_var_somewhere
Prints the thread id, frame location and some_local_var_somewhere
value in frames of threads that have such local var.
To make the life of the user easier, the most typical use cases
have shortcuts :
taas : shortcut for 'thread apply all -s'
tfaas : shortcut for 'thread apply all -s frame apply all -s"
An example usage :
tfaas p some_local_var_somewhere
same as the longer:
'thread apply all -s frame apply all -s p some_local_var_somewhere'
gdb/ChangeLog
2018-07-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* thread.c (thr_try_catch_cmd): New function.
(thread_apply_all_command): Handle qcs flags.
(thread_apply_command): Handle qcs flags.
(taas_command): New function.
(tfaas_command): New function.
(_initialize_thread): Update to setup the new commands 'taas
and 'tfaas'. Change doc string for 'thread apply'.
It's long annoyed me that "info threads"'s columns are misaligned.
Particularly the "Target Id" column's content is usually longer than
the specified column width, so the table ends up with the "Frame"
column misaligned. For example, currently we get this:
(gdb) info threads
Id Target Id Frame
1 Thread 0x7ffff7fb5740 (LWP 9056) "threads" 0x00007ffff7bc28ad in __pthread_join (threadid=140737345763072, thread_return=0x7fffffffd3e8) at pthread_join.c:90
2 Thread 0x7ffff7803700 (LWP 9060) "function0" thread_function0 (arg=0x0) at threads.c:90
* 3 Thread 0x7ffff7002700 (LWP 9061) "threads" thread_function1 (arg=0x1) at threads.c:106
The fact that the "Frame" heading is in a weird spot is particularly
annoying.
This commit turns the above into into this:
(gdb) info threads
Id Target Id Frame
1 Thread 0x7ffff7fb5740 (LWP 7548) "threads" 0x00007ffff7bc28ad in __pthread_join (threadid=140737345763072, thread_return=0x7fffffffd3e8) at pthread_join.c:90
2 Thread 0x7ffff7803700 (LWP 7555) "function0" thread_function0 (arg=0x0) at threads.c:91
* 3 Thread 0x7ffff7002700 (LWP 7557) "threads" thread_function1 (arg=0x1) at threads.c:104
It does that by computing the max width of the "Target Id" column and
using that as column width when creating the table.
This results in calling target_pid_to_str / target_extra_thread_info /
target_thread_name twice for each thread, but I think that it doesn't
matter in practice performance-wise, because the remote target caches
the info, and with native targets it shouldn't be noticeable. It
could matter if we have many threads (say, thousands), but then "info
threads" is practically useless in such a scenario anyway -- better
thread filtering and aggregation would be necessary.
(Note: I have an old branch somewhere where I attempted at making
gdb's "info threads"-like tables follow a model/view design, so that a
general framework took care of issues like these, but it's incomplete
and a much bigger change. This patch doesn't prevent going in that
direction in the future, of course.)
gdb/ChangeLog:
2018-06-29 Pedro Alves <palves@redhat.com>
* thread.c (thread_target_id_str): New, factored out from ...
(print_thread_info_1): ... here. Use it to compute the max
"Target Id" column width.
gdb/testsuite/ChangeLog:
2018-06-29 Pedro Alves <palves@redhat.com>
* gdb.threads/names.exp: Adjust expected "info threads" output.
In my multi-target work, I need to add a few more
scoped_restore_current_thread and switch_to_thread calls in some
places, and in some lower-level places I was fighting against the fact
that switch_to_thread reads/refreshes the stop_pc global.
Instead of piling on workarounds, let's just finally eliminate the
stop_pc global. We already have the per-thread
thread_info->suspend.stop_pc field, so it's mainly a matter of using
that more/instead.
gdb/ChangeLog:
2018-06-28 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend
comments.
(switch_to_thread_no_regs): Adjust comment.
* infcmd.c (stop_pc): Delete.
(post_create_inferior, info_program_command): Replace references
to stop_pc with references to thread_info->suspend.stop_pc.
* inferior.h (stop_pc): Delete declaration.
* infrun.c (proceed, handle_syscall_event, fill_in_stop_func)
(handle_inferior_event_1, handle_signal_stop)
(process_event_stop_test, keep_going_stepped_thread)
(handle_step_into_function, handle_step_into_function_backward)
(print_stop_location): Replace references to stop_pc with
references to thread_info->suspend.stop_pc.
(struct infcall_suspend_state) <stop_pc>: Delete field.
(save_infcall_suspend_state, restore_infcall_suspend_state):
Remove references to inf_stat->stop_pc.
* linux-fork.c (fork_load_infrun_state): Likewise.
* record-btrace.c (record_btrace_set_replay): Likewise.
* record-full.c (record_full_goto_entry): Likewise.
* remote.c (print_one_stopped_thread): Likewise.
* target.c (target_resume): Extend comment.
* thread.c (set_executing_thread): New.
(set_executing): Use it.
(switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread):
Remove references to stop_pc.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
I get this kind of errors with GCC 6.3.0:
/home/simark/src/binutils-gdb/gdb/breakpoint.c: In function 'void print_solib_event(int)':
/home/simark/src/binutils-gdb/gdb/breakpoint.c:4618:12: error: types may not be defined in a for-range-declaration [-Werror]
for (struct so_list *iter : current_program_space->added_solibs)
^~~~~~
Removing the struct keyword makes it happy.
gdb/ChangeLog:
* breakpoint.c (print_solib_event, check_status_catch_solib):
Remove struct keyword in range-based for loops.
* dbxread.c (find_corresponding_bincl_psymtab): Likewise.
* dwarf2read.c (compute_delayed_physnames, rust_union_quirks);
Likewise.
* linespec.c (find_superclass_methods, search_minsyms_for_name):
Likewise.
* symfile.c (addr_info_make_relative): Likewise.
* thread.c (value_in_thread_stack_temporaries): Likewise.
Add a Usage: line for thread_apply_command, in particular to mention
the thread ID list.
In thread_apply_command and thread_apply_all_command help, use
uppercase for arg names, as this style seems to be more standard.
2018-04-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* thread.c (_initialize_thread): improve on-line help for
thread_apply_command and thread_apply_all_command.
Fix some typos.
Remove obsolete comment about dispatch to thread_apply_command,
rather tell that thread_command either switches to a thread,
or prints the current thread.
2018-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* thread.c (thread_apply_all_command): Fix comment.
(thread_command): Fix comment.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
This started as a patch to change enable_thread_stack_temporaries to
be an RAII class, but then I noticed that this code used a VEC, so I
went ahead and did a bit more C++-ification, changing
stack_temporaries_enabled to a bool and changing stack_temporaries to
a std::vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-08 Tom Tromey <tom@tromey.com>
* infcall.c (struct call_return_meta_info)
<stack_temporaries_enabled>: Remove.
(get_call_return_value, call_function_by_hand_dummy): Update.
* thread.c (disable_thread_stack_temporaries): Remove.
(enable_thread_stack_temporaries): Remove.
(thread_stack_temporaries_enabled_p): Return bool.
(push_thread_stack_temporary, value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Update.
* eval.c (evaluate_subexp): Update.
* gdbthread.h (class enable_thread_stack_temporaries): Now a
class, not a function.
(value_ptr, value_vec): Remove typedefs.
(class thread_info) <stack_temporaries_enabled>: Now bool.
<stack_temporaries>: Now a std::vector.
(thread_stack_temporaries_enabled_p)
(value_in_thread_stack_temporaries): Return bool.
There are multiple definitions of the private_thread_info structure
compiled in the same GDB build. Because of the one definition rule, we
need to change this if we want to be able to make them non-POD (e.g. use
std::vector fields). This patch creates a class hierarchy, with
private_thread_info being an abstract base class, and all the specific
implementations inheriting from it.
In order to poison XNEW/xfree for non-POD types, it is also needed to
get rid of the xfree in thread_info::~thread_info, which operates on an
opaque type. This is replaced by thread_info::priv now being a
unique_ptr, which calls the destructor of the private_thread_info
subclass when the thread is being destroyed.
Including gdbthread.h from darwin-nat.h gave these errors:
/Users/simark/src/binutils-gdb/gdb/gdbthread.h:609:3: error: must use 'class' tag to refer to type 'thread_info' in this scope
thread_info *m_thread;
^
class
/usr/include/mach/thread_act.h:240:15: note: class 'thread_info' is hidden by a non-type declaration of 'thread_info' here
kern_return_t thread_info
^
It turns out that there is a thread_info function in the Darwin/XNU/mach API:
http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/thread_info.html
Therefore, I had to add the class keyword at a couple of places in gdbthread.h,
I don't really see a way around it.
gdb/ChangeLog:
* gdbthread.h (private_thread_info): Define structure type, add
virtual pure destructor.
(thread_info) <priv>: Change type to unique_ptr.
<private_dtor>: Remove.
* thread.c (add_thread_with_info): Adjust to use of unique_ptr.
(private_thread_info::~private_thread_info): Provide default
implementation.
(thread_info::~thread_info): Don't call private_dtor nor
manually free priv.
* aix-thread.c (private_thread_info): Rename to ...
(aix_thread_info): ... this.
(get_aix_thread_info): New.
(sync_threadlists): Adjust.
(iter_tid): Adjust.
(aix_thread_resume): Adjust.
(aix_thread_fetch_registers): Adjust.
(aix_thread_store_registers): Adjust.
(aix_thread_extra_thread_info): Adjust.
* darwin-nat.h (private_thread_info): Rename to ...
(darwin_thread_info): ... this.
(get_darwin_thread_info): New.
* darwin-nat.c (darwin_init_thread_list): Adjust.
(darwin_check_new_threads): Adjust.
(thread_info_from_private_thread_info): Adjust.
* linux-thread-db.c (private_thread_info): Rename to ...
(thread_db_thread_info): ... this, initialize fields.
(get_thread_db_thread_info): New.
<dying>: Change type to bool.
(update_thread_state): Adjust to type rename.
(record_thread): Adjust to type rename an use of unique_ptr.
(thread_db_pid_to_str): Likewise.
(thread_db_extra_thread_info): Likewise.
(thread_db_thread_handle_to_thread_info): Likewise.
(thread_db_get_thread_local_address): Likewise.
* nto-tdep.h (private_thread_info): Rename to ...
(nto_thread_info): ... this, initialize fields.
(get_nto_thread_info): New.
<name>: Change type to std::string.
* nto-tdep.c (nto_extra_thread_info): Adjust to type rename and
use of unique_ptr.
* nto-procfs.c (update_thread_private_data_name): Adjust to
std::string change, allocate nto_private_thread_info with new.
(update_thread_private_data): Adjust to unique_ptr.
* remote.c (private_thread_info): Rename to ...
(remote_thread_info): ... this, initialize data members with
default values.
<extra, name>: Change type to std::string.
<thread_handle>: Change type to non-pointer.
(free_private_thread_info): Remove.
(get_private_info_thread): Rename to...
(get_remote_thread_info): ... this, change return type, adjust to
use of unique_ptr, use remote_thread_info constructor.
(remote_add_thread): Adjust.
(get_private_info_ptid): Rename to...
(get_remote_thread_info): ...this, change return type.
(remote_thread_name): Use get_remote_thread_info, adjust to
change to std::string.
(struct thread_item) <~thread_item>: Remove.
<thread_handle>: Make non pointer.
(start_thread): Adjust to thread_item::thread_handle type
change.
(remote_update_thread_list): Adjust to type name change, move
strings from temporary to long-lived object instead of
duplicating.
(remote_threads_extra_info): Use get_remote_thread_info.
(process_initial_stop_replies): Likewise.
(resume_clear_thread_private_info): Likewise.
(remote_resume): Adjust to type name change.
(remote_commit_resume): Use get_remote_thread_info.
(process_stop_reply): Adjust to type name change.
(remote_stopped_by_sw_breakpoint): Use get_remote_thread_info.
(remote_stopped_by_hw_breakpoint): Likewise.
(remote_stopped_by_watchpoint): Likewise.
(remote_stopped_data_address): Likewise.
(remote_core_of_thread): Likewise.
(remote_thread_handle_to_thread_info): Use
get_private_info_thread, adjust to thread_handle field type
change.
This patch gets rid of catch_exceptions / catch_exceptions_with_msg.
The latter is done mostly by getting rid of the three remaining
vestigial libgdb wrapper functions, which are really pointless
nowadays. This results in a good number of simplifications.
(I checked that Insight doesn't use those functions.)
The gdb.mi/mi-pthreads.exp change is necessary because this actually
fixes a bug, IMO -- the patch stops MI's -thread-select causing output
on the CLI stream.
I.e., before:
-thread-select 123456789
&"Thread ID 123456789 not known.\n"
^error,msg="Thread ID 123456789 not known."
(gdb)
After:
-thread-select 123456789
^error,msg="Thread ID 123456789 not known."
(gdb)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (struct captured_breakpoint_query_args)
(do_captured_breakpoint_query, gdb_breakpoint_query): Delete.
(print_breakpoint): New.
* breakpoint.h (print_breakpoint): Declare.
* common/common-exceptions.h (enum return_reason): Remove
references to catch_exceptions.
* exceptions.c (catch_exceptions, catch_exceptions_with_msg):
Delete.
* exceptions.h (catch_exceptions_ftype, catch_exceptions)
(catch_exception_ftype, catch_exceptions_with_msg): Delete.
* gdb.h: Delete.
* gdbthread.h (thread_select): Declare.
* mi/mi-cmd-break.c: Don't include gdb.h.
(breakpoint_notify): Use print_breakpoint.
* mi/mi-cmd-catch.c: Don't include gdb.h.
* mi/mi-interp.c: Don't include gdb.h.
(mi_print_breakpoint_for_event): New.
(mi_breakpoint_created, mi_breakpoint_modified): Use
mi_print_breakpoint_for_event.
* mi/mi-main.c: Don't include gdb.h.
(mi_cmd_thread_select): Parse the global thread ID here. Use
thread_select instead of gdb_thread_select.
(mi_cmd_thread_list_ids): Output "thread-ids" tuple here instead
of using gdb_list_thread_ids.
* remote-fileio.c (do_remote_fileio_request): Change type. Reply
FILEIO_ENOSYS here.
(remote_fileio_request): Use TRY/CATCH instead of
catch_exceptions.
* symfile-mem.c (struct symbol_file_add_from_memory_args)
(symbol_file_add_from_memory_wrapper): Delete.
(add_vsyscall_page): Use TRY/CATCH instead of catch_exceptions.
* thread.c: Don't include gdb.h.
(do_captured_list_thread_ids, gdb_list_thread_ids): Delete.
(thread_alive): Use thread_select.
(do_captured_thread_select): Delete, parts salvaged as ...
(thread_select): ... this new function.
(gdb_thread_select): Delete.
gdb/testsuite/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
expect CLI output.
This patch adds a target method named `to_thread_handle_to_thread_info'.
It is intended to map a thread library specific thread handle (such as
pthread_t for the pthread library) to the corresponding GDB internal
thread_info struct (pointer).
An implementation is provided for Linux pthreads; see linux-thread-db.c.
gdb/ChangeLog:
* target.h (struct target_ops): Add to_thread_handle_to_thread_info.
(target_thread_handle_to_thread_info): Declare.
* target.c (target_thread_handle_to_thread_info): New function.
* target-delegates.c: Regenerate.
* gdbthread.h (find_thread_by_handle): Declare.
* thread.c (find_thread_by_handle): New function.
* linux-thread-db.c (thread_db_thread_handle_to_thread_info): New
function.
(init_thread_db_ops): Register thread_db_thread_handle_to_thread_info.
There are two calls to uiout->is_mi_like_p in the else branch of a
if (uiout->is_mi_like_p ()), we already know they will return false.
A bit lower, there are two if (!uiout->is_mi_like_p ()) that we can
merge.
gdb/ChangeLog:
* thread.c (print_thread_info_1): Remove unnecessary calls to
uiout->is_mi_like_p.
This changes print_thread_info_1 to use ui_out_emit_table and
ui_out_emit_list. Which one is used depends on whether the ui-out is
mi-like; so the emitters are wrapped in gdb::optional.
ChangeLog
2017-09-09 Tom Tromey <tom@tromey.com>
* thread.c (print_thread_info_1): Use ui_out_emit_table,
ui_out_emit_list, gdb::optional.
This changes a few spots in thread.c to use std::string, removing some
cleanups.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* thread.c (print_thread_info_1): Use string_printf.
(thread_apply_command, thread_apply_all_command): Use
std::string.
After all the make_cleanup_restore_current_thread fixing, I thought
I'd convert that and its relatives (which are all cleanups) to RAII
classes.
scoped_restore_current_pspace_and_thread was put in a separate file to
avoid a circular dependency.
Tested on x86-64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add progspace-and-thread.c.
(HFILES_NO_SRCDIR): Add progspace-and-thread.h.
(COMMON_OBS): Add progspace-and-thread.o.
* breakpoint.c: Include "progspace-and-thread.h".
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, create_longjmp_master_breakpoint):
Use scoped_restore_current_pspace_and_thread.
(create_std_terminate_master_breakpoint): Use
scoped_restore_current_program_space.
(remove_breakpoint): Use scoped_restore_current_pspace_and_thread.
(print_breakpoint_location): Use
scoped_restore_current_program_space.
(bp_loc_is_permanent): Use
scoped_restore_current_pspace_and_thread.
(resolve_sal_pc): Use scoped_restore_current_pspace_and_thread.
(download_tracepoint_locations): Use
scoped_restore_current_pspace_and_thread.
(breakpoint_re_set): Use scoped_restore_current_pspace_and_thread.
* exec.c (exec_close_1): Use scoped_restore_current_program_space.
(enum step_over_calls_kind): Moved from inferior.h.
(class scoped_restore_current_thread): New class.
* gdbthread.h (make_cleanup_restore_current_thread): Delete
declaration.
(scoped_restore_current_thread): New class.
* infcmd.c: Include "common/gdb_optional.h".
(continue_1, proceed_after_attach): Use
scoped_restore_current_thread.
(notice_new_inferior): Use scoped_restore_current_thread.
* inferior.c: Include "progspace-and-thread.h".
(restore_inferior, save_current_inferior): Delete.
(add_inferior_command, clone_inferior_command): Use
scoped_restore_current_pspace_and_thread.
* inferior.h (scoped_restore_current_inferior): New class.
* infrun.c: Include "progspace-and-thread.h" and
"common/gdb_optional.h".
(follow_fork_inferior): Use
scoped_restore_current_pspace_and_thread.
(scoped_restore_exited_inferior): New class.
(handle_vfork_child_exec_or_exit): Use
scoped_restore_exited_inferior,
scoped_restore_current_pspace_and_thread,
scoped_restore_current_thread and scoped_restore.
(fetch_inferior_event): Use scoped_restore_current_thread.
* linespec.c (decode_line_full, decode_line_1): Use
scoped_restore_current_program_space.
* mi/mi-main.c: Include "progspace-and-thread.h".
(exec_continue): Use scoped_restore_current_thread.
(mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread.
(mi_cmd_trace_frame_collected): Use scoped_restore_current_thread.
* proc-service.c (ps_pglobal_lookup): Use
scoped_restore_current_program_space.
* progspace-and-thread.c: New file.
* progspace-and-thread.h: New file.
* progspace.c (release_program_space, clone_program_space): Use
scoped_restore_current_program_space.
(restore_program_space, save_current_program_space)
(save_current_space_and_thread): Delete.
(switch_to_program_space_and_thread): Moved to
progspace-and-thread.c.
* progspace.h (save_current_program_space)
(save_current_space_and_thread): Delete declarations.
(scoped_restore_current_program_space): New class.
* remote.c (remote_btrace_maybe_reopen): Use
scoped_restore_current_thread.
* symtab.c: Include "progspace-and-thread.h".
(skip_prologue_sal): Use scoped_restore_current_pspace_and_thread.
* thread.c (print_thread_info_1): Use
scoped_restore_current_thread.
(struct current_thread_cleanup): Delete.
(do_restore_current_thread_cleanup)
(restore_current_thread_cleanup_dtor): Rename/convert both to ...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this new dtor.
(make_cleanup_restore_current_thread): Rename/convert to ...
(scoped_restore_current_thread::scoped_restore_current_thread):
... this new ctor.
(thread_apply_all_command): Use scoped_restore_current_thread.
(thread_apply_command): Use scoped_restore_current_thread.
* tracepoint.c (tdump_command): Use scoped_restore_current_thread.
* varobj.c (value_of_root_1): Use scoped_restore_current_thread.
The unconditional is_stopped call already asserts that the thread exists.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* thread.c (make_cleanup_restore_current_thread): Move
find_thread_ptid call before the is_stopped call. Assert that the
thread is found. Replace is_stopped call by checking the thread's
state directly. Remove unnecessary NULL-thread check.
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
The MI documentation says that -thread-info output contains a "current"
field in the current thread tuple, with the value "*". Current GDB
master does not do this, and I couldn't find any GDB version that did.
I suspect that it was never the case.
The code that would correspond to this in print_thread_info_1 is
essentially dead code. The calls to uiout->text end up in
mi_out::do_text, which is empty.
This patch removes the documentation bit and the dead code. This
"current" field is not necessary, since -thread-info outputs a
"current-thread-id" field.
gdb/ChangeLog:
* thread.c (print_thread_info_1): Remove dead code.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Thread Commands): Remove "current" field
from -thread-info output.
This patch fixes an internal error exposed by a test that does
something like:
define kill-and-remove
kill inferiors 2
remove-inferiors 2
end
# Start one inferior.
start
# Start another inferior.
add-inferior 2
inferior 2
start
# Kill and remove inferior 1 while inferior 2 is selected.
thread apply 1.1 kill-and-remove
The internal error looks like this:
Thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677)):
[Switching to inferior 1 [process 20677] (gdb/testsuite/outputs/gdb.threads/threadapply/threadapply)]
[Switching to thread 1.1 (Thread 0x7ffff7fc2700 (LWP 20677))]
#0 main () at src/gdb/testsuite/gdb.threads/threadapply.c:38
38 for (i = 0; i < NUM; i++)
src/gdb/inferior.c:66: internal-error: void set_current_inferior(inferior*): Assertion `inf != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/threadapply.exp: kill_and_remove_inferior: try kill-and-remove: thread apply 1.1 kill-and-remove (GDB internal error)
There are several problems around this area of the code. One is that
in do_restore_current_thread_cleanup, we do a look up of inferior by
ptid, which can find the wrong inferior if the previously selected
inferior exited and some other inferior was started with a reused pid
(rare, but still...).
The other problem is that the "remove-inferiors" command rejects
attempts to remove the current inferior, but when we get to
"remove-inferiors" in a "thread apply THR remove-inferiors 2" command,
the current inferior is the inferior of thread THR, not the previously
selected inferior, so if the previously selected inferior was inferior
2, that command still manages to wipe it, and then gdb restores the
old selected inferior, which is now a dangling pointer...
So the fix here is:
- Make make_cleanup_restore_current_thread store a pointer to the
previously selected inferior directly, and use it directly instead
of doing ptid look ups.
- Add a refcount to inferiors, very similar to thread_info's refcount,
that is incremented/decremented by
make_cleanup_restore_current_thread, and checked before deleting an
inferior. To avoid duplication, a new refcounted_object type is
added, that both thread_info and inferior inherit from.
gdb/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* common/refcounted-object.h: New file.
* gdbthread.h: Include "common/refcounted-object.h".
(thread_info): Inherit from refcounted_object and add comments.
(thread_info::incref, thread_info::decref)
(thread_info::m_refcount): Delete.
(thread_info::deletable): Use the refcounted_object::refcount()
method.
* inferior.c (current_inferior_): Add comment.
(set_current_inferior): Increment/decrement refcounts.
(prune_inferiors, remove_inferior_command): Skip inferiors marked
not-deletable instead of comparing with the current inferior.
(initialize_inferiors): Increment the initial inferior's refcount.
* inferior.h (struct inferior): Forward declare.
Include "common/refcounted-object.h".
(current_inferior, set_current_inferior): Move declaration to
before struct inferior's definition, and fix comment.
(inferior): Inherit from refcounted_object. Add comments.
* thread.c (switch_to_thread_no_regs): Reference the thread's
inferior pointer directly instead of doing a ptid lookup.
(switch_to_no_thread): New function.
(switch_to_thread(thread_info *)): New function, factored out
from ...
(switch_to_thread(ptid_t)): ... this.
(restore_current_thread): Delete.
(current_thread_cleanup): Remove 'inf_id' and 'was_removable'
fields, and add 'inf' field.
(do_restore_current_thread_cleanup): Check whether old->inf is
alive instead of looking up an inferior by ptid. Use
switch_to_thread and switch_to_no_thread.
(restore_current_thread_cleanup_dtor): Use old->inf directly
instead of lookup up an inferior by id. Decref the inferior.
Don't restore 'removable'.
(make_cleanup_restore_current_thread): Same the inferior pointer
in old, instead of the inferior number. Incref the inferior.
Don't save/clear 'removable'.
gdb/testsuite/ChangeLog:
2017-04-19 Pedro Alves <palves@redhat.com>
* gdb.threads/threadapply.exp (kill_and_remove_inferior): New
procedure.
(top level): Call it.
* lib/gdb.exp (gdb_define_cmd): New procedure.
This eliminates a couple cleanups.
gdb/ChangeLog:
2017-04-13 Pedro Alves <palves@redhat.com>
* thread.c: Include <algorithm>.
(thread_array_cleanup): Delete.
(scoped_inc_dec_ref): New class.
(live_threads_count): New function.
(set_thread_refcount): Delete.
(tp_array_compar_ascending): Now a bool.
(tp_array_compar): Convert to a std::sort comparison function.
(thread_apply_all_command): Use std::vector and scoped_inc_dec_ref
and live_threads_count.
I build GDB with asan, and run test case hook-stop.exp, and threadapply.exp,
I got the following asan error,
=================================================================^M
^[[1m^[[31m==2291==ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000999c4 at pc 0x000000826022 bp 0x7ffd28a8ff70 sp 0x7ffd28a8ff60^M
^[[1m^[[0m^[[1m^[[34mREAD of size 4 at 0x6160000999c4 thread T0^[[1m^[[0m^M
#0 0x826021 in release_stop_context_cleanup ../../binutils-gdb/gdb/infrun.c:8203^M
#1 0x72798a in do_my_cleanups ../../binutils-gdb/gdb/common/cleanups.c:154^M
#2 0x727a32 in do_cleanups(cleanup*) ../../binutils-gdb/gdb/common/cleanups.c:176^M
#3 0x826895 in normal_stop() ../../binutils-gdb/gdb/infrun.c:8381^M
#4 0x815208 in fetch_inferior_event(void*) ../../binutils-gdb/gdb/infrun.c:4011^M
#5 0x868aca in inferior_event_handler(inferior_event_type, void*) ../../binutils-gdb/gdb/inf-loop.c:44^M
....
^[[1m^[[32m0x6160000999c4 is located 68 bytes inside of 568-byte region [0x616000099980,0x616000099bb8)^M
^[[1m^[[0m^[[1m^[[35mfreed by thread T0 here:^[[1m^[[0m^M
#0 0x7fb0bc1312ca in __interceptor_free (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x982ca)^M
#1 0xb8c62f in xfree(void*) ../../binutils-gdb/gdb/common/common-utils.c:100^M
#2 0x83df67 in free_thread ../../binutils-gdb/gdb/thread.c:207^M
#3 0x83dfd2 in init_thread_list() ../../binutils-gdb/gdb/thread.c:223^M
#4 0x805494 in kill_command ../../binutils-gdb/gdb/infcmd.c:2595^M
....
Detaching from program: /home/yao.qi/SourceCode/gnu/build-with-asan/gdb/testsuite/outputs/gdb.threads/threadapply/threadapply, process 2399^M
=================================================================^M
^[[1m^[[31m==2387==ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000a98c0 at pc 0x00000083fd28 bp 0x7ffd401c3110 sp 0x7ffd401c3100^M
^[[1m^[[0m^[[1m^[[34mREAD of size 4 at 0x6160000a98c0 thread T0^[[1m^[[0m^M
#0 0x83fd27 in thread_alive ../../binutils-gdb/gdb/thread.c:741^M
#1 0x844277 in thread_apply_all_command ../../binutils-gdb/gdb/thread.c:1804^M
....
^M
^[[1m^[[32m0x6160000a98c0 is located 64 bytes inside of 568-byte region [0x6160000a9880,0x6160000a9ab8)^M
^[[1m^[[0m^[[1m^[[35mfreed by thread T0 here:^[[1m^[[0m^M
#0 0x7f59a7e322ca in __interceptor_free (/usr/lib/x86_64-linux-gnu/libasan.so.2+0x982ca)^M
#1 0xb8c62f in xfree(void*) ../../binutils-gdb/gdb/common/common-utils.c:100^M
#2 0x83df67 in free_thread ../../binutils-gdb/gdb/thread.c:207^M
#3 0x83dfd2 in init_thread_list() ../../binutils-gdb/gdb/thread.c:223^M
This patch fixes the issue by deleting thread_info object if it is
deletable, otherwise, mark it as exited (by set_thread_exited).
Function set_thread_exited is shared from delete_thread_1. This patch
also moves field "refcount" to private and methods incref and
decref. Additionally, we stop using "ptid_t" in
"struct current_thread_cleanup" to reference threads, instead we use
"thread_info" directly. Due to this change, we don't need
restore_current_thread_ptid_changed anymore.
gdb:
2017-04-10 Yao Qi <yao.qi@linaro.org>
PR gdb/19942
* gdbthread.h (thread_info::deletable): New method.
(thread_info::incref): New method.
(thread_info::decref): New method.
(thread_info::refcount): Move it to private.
* infrun.c (save_stop_context): Call inc_refcount.
(release_stop_context_cleanup): Likewise.
* thread.c (set_thread_exited): New function.
(init_thread_list): Delete "tp" only it is deletable, otherwise
call set_thread_exited.
(delete_thread_1): Call set_thread_exited.
(current_thread_cleanup) <inferior_pid>: Remove.
<thread>: New field.
(restore_current_thread_ptid_changed): Removed.
(do_restore_current_thread_cleanup): Adjust.
(restore_current_thread_cleanup_dtor): Don't call
find_thread_ptid.
(set_thread_refcount): Use dec_refcount.
(make_cleanup_restore_current_thread): Adjust.
(thread_apply_all_command): Call inc_refcount.
(_initialize_thread): Don't call
observer_attach_thread_ptid_changed.
This patch hoists code on marking thread as exited, so more code is shared
for two different paths (thread_info is deleted or is not deleted).
gdb:
2017-04-10 Yao Qi <yao.qi@linaro.org>
* thread.c (delete_thread_1): Hoist code on marking thread as
exited.
This patch adds constructor and destructor to thread_info.
gdb:
2017-03-29 Yao Qi <yao.qi@linaro.org>
* gdbthread.h (struct thread_info): Declare constructor and
destructor. Add some in-class member initializers.
* thread.c (free_thread): Remove.
(init_thread_list): Call delete instead of free_thread.
(new_thread): Call thread_info constructor.
(thread_info::thread_info): New function.
(thread_info::~thread_info): New function.
(delete_thread_1): Call delete instead of free_thread.
(make_cleanup_restore_current_thread): Move tp and frame to
inner block.
Add a function can_access_registers_ptid that behaves like
validate_registers_access but returns a boolean value instead of throwing an
exception.
gdb/
* gdbthread.h (can_access_registers_ptid): New.
* thread.c (can_access_registers_ptid): New.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This converts tid_range_parser and get_number_or_range to be classes.
The various tid_range_parser_* and get_number_or_range_* functions
become methods on the respective classes. Then it updates the users
to follow.
The rationale for the change is that this provides better
encapsulation. For example, this forced me to think of a better
interface between tid_range_parser and get_number_or_range, since the
former peeked into the latter's internals a bit too much. That ended
up resulting mostly in these two not-just-straight-1-1 changes:
void
-tid_range_parser_skip (struct tid_range_parser *parser)
+tid_range_parser::skip_range ()
{
...
- tid_range_parser_init (parser, parser->range_parser.end_ptr,
- parser->default_inferior);
+ m_range_parser.skip_range ();
+ init (m_range_parser.string (), m_default_inferior);
}
and:
/* If we successfully parsed a thread number or finished parsing a
thread range, switch back to assuming the next TID is
inferior-qualified. */
- if (parser->range_parser.end_ptr == NULL
- || parser->range_parser.string == parser->range_parser.end_ptr)
+ if (!m_range_parser.in_range ())
{
For the same reason (encapsulation), this moves the enum
tid_range_state definition to within the tid_parser class's scope,
since that is private implementation detail.
While at it, switch to use "bool" for booleans.
gdb/ChangeLog:
2016-10-13 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* tid-parse.h (tid_range_parser): New class.
(enum tid_range_state): Move into tid_range_parser's scope.
Remove TID_RANGE_ prefix from all values.
(tid_range_parser_get_tid, tid_range_parser_get_tid_range)
(tid_range_parser_star_range, tid_range_parser_finished)
(tid_range_parser_skip, tid_range_parser_qualified): Don't
declare.
(tid_is_in_list): Update comment.
* tid-parse.c (tid_range_parser::tid_range_parser): New.
(init, finished, get_string, skip, tid_is_qualified)
(get_tid_or_range, get_tid_range, get_tid, star_range): Rename;
turn into methods.
(tid_is_in_list): Adjust.
* cli/cli-utils.h (number_or_range_parser): New class.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Don't declare.
* cli/cli-utils.c
(number_or_range_parser::number_or_range_parser): New.
(init_number_or_range, get_number_or_range)
(number_range_setup_range): Rename; turn into methods.
(number_is_in_list): Adjust.
* breakpoint.c (map_breakpoint_numbers): Adjust. Use bool.
(trace_pass_command, get_tracepoint_by_number): Adjust.
* breakpoint.h (get_tracepoint_by_number): Adjust.
* inferior.c (detach_inferior_command, kill_inferior_command)
(remove_inferior_command): Adjust.
* linespec.c (decode_line_2): Adjust.
* memattr.c (mem_enable_command, mem_disable_command)
(mem_delete_command): Adjust.
* printcmd.c (map_display_numbers): Adjust.
* reverse.c (delete_bookmark_command, bookmarks_info): Adjust.
* thread.c (thread_apply_command): Adjust.
Tom Tromey