Same idea as previous patches, but for about_to_proceed. We only need
(and want, as far as the mi_interp implementation is concerned) to
notify the interpreter that caused the proceed.
Change-Id: Id259bca10dbc3d43d46607ff7b95243a9cbe2f89
Same idea as previous patches, but for inferior_disappeared.
For symmetry with on_inferior_appeared, I named this one
on_inferior_disappeared, despite the observer being called
inferior_exit. This is called when detaching an inferior, so I think
that calling it "disappeared" is a bit less misleading (the observer
should probably be renamed later).
Change-Id: I372101586bc9454997953c1e540a2a6685f53ef6
Same idea as previous patches, but for inferior_added.
mi_interp::init avoided using mi_inferior_added, since, as the comment
used to say, it would notify all MI interpreters. Now, it's easy to
only notify the new interpreter, so it's possible to just call the
on_inferior_added method in mi_interp::init.
Change-Id: I0eddbd5367217d1c982516982089913019ef309f
Same as previous patches, but for sync_execution_done. Except that
here, we only want to notify the interpreter that is executing the
command, not all interpreters.
Change-Id: I729c719447b5c5f29af65dbf6fed9132e2cd308b
Same as previous patch, but for exited. Remove the exited observable,
since nothing uses it anymore, and we don't have anything coming that
will use it.
Change-Id: I358cbea0159af56752dfee7510d6a86191e722bb
Same as previous patch, but for signal_exited. Remove the signal_exited
observable, since nothing uses it anymore, and we don't have anything
coming that will use it.
Change-Id: I0dca1eab76338bf27be755786e3dad3241698b10
Instead of having the interpreter code registering observers for the
signal_received observable, add a "signal_received" virtual method to
struct interp. Add a interps_notify_signal_received function that loops
over all UIs and calls the signal_received method on the interpreter.
Finally, add a notify_signal_received function that calls
interps_notify_signal_received and then notifies the observers. Replace
all existing notifications to the signal_received observers with calls
to notify_signal_received.
Before this patch, the CLI and MI code both register a signal_received
observer. These observer go over all UIs, and, for those that have a
interpreter of the right kind, print the stop notifiation.
After this patch, we have just one "loop over all UIs", inside
interps_notify_signal_received. Since the interp::on_signal_received
method gets called once for each interpreter, the implementations only
need to deal with the current interpreter (the "this" pointer).
The motivation for this patch comes from a future patch, that makes the
amdgpu code register an observer to print a warning after the CLI's
signal stop message. Since the amdgpu and the CLI code both use
observers, the order of the two messages is not stable, unless we define
the priority using the observer dependency system. However, the
approach of using virtual methods on the interpreters seems like a good
change anyway, I think it's more straightforward and simple to
understand than the current solution that uses observers. We are sure
that the amdgpu message gets printed after the CLI message, since
observers are notified after interpreters.
Keep the signal_received, even if nothing uses if, because we will be
using it in the upcoming amdgpu patch implementing the warning described
above.
Change-Id: I4d8614bb8f6e0717f4bfc2a59abded3702f23ac4
Simon reported that the new test-case gdb.tui/pr30056.exp fails with system
readline.
This is because the test-case requires a fix in readline that's present in our
in-repo copy of readline, but most likely not in any system readline yet.
Fix this by:
- mentioning --with-system-readline or --without-system-readline in the
configuration string.
- adding a new proc with_system_readline that makes this information available
in the testsuite.
- using this in test-case gdb.tui/pr30056.exp to declare it unsupported for
--with-system-readline.
Tested on x86_64-linux.
Reported-By: Simon Marchi <simon.marchi@efficios.com>
Approved-By: Simon Marchi <simon.marchi@efficios.com>
I came across a bug in the implementation of line feed in tuiterm, and added a
unit test that exposes it.
Before sending the line feed we have:
...
Screen Dump (size 8 columns x 4 rows, cursor at column 0, row 3):
0 abcdefgh
1 ijklmnop
2 qrstuvwx
3 yz01234
...
and after it we have:
...
Screen Dump (size 8 columns x 4 rows, cursor at column 0, row 1):
0 ijklmnop
1 qrstuvwx
2 yz01234
3 yz01234
...
Note how the cursor started at row 3 and after the line feed ended up at
row 1, while it should have stayed in row 3.
Fix this by moving "incr _cur_row -1" one level up in the loop nest in
proc _ctl_0x0a.
Tested on x86_64-linux.
I stumbled on the mi_proceeded and running_result_record_printed
globals, which are shared by all MI interpreter instances (it's unlikely
that people use multiple MI interpreter instances, but it's possible).
After poking at it, I found this bug:
1. Start GDB in MI mode
2. Add a second MI interpreter with the new-ui command
3. Use -exec-run on the second interpreter
This is the output I get on the first interpreter:
=thread-group-added,id="i1"
~"Reading symbols from a.out...\n"
~"New UI allocated\n"
(gdb)
=thread-group-started,id="i1",pid="94718"
=thread-created,id="1",group-id="i1"
^running
*running,thread-id="all"
And this is the output I get on the second intepreter:
=thread-group-added,id="i1"
(gdb)
-exec-run
=thread-group-started,id="i1",pid="94718"
=thread-created,id="1",group-id="i1"
*running,thread-id="all"
The problem here is that the `^running` reply to the -exec-run command
is printed on the wrong UI. It is printed on the first one, it should
be printed on the second (the one on which we sent the -exec-run).
What happens under the hood is that captured_mi_execute_command, while
executing a command for the second intepreter, clears the
running_result_record_printed and mi_proceeded globals.
mi_about_to_proceed then sets mi_proceeded. Then, mi_on_resume_1 gets
called for the first intepreter first. Since the
!running_result_record_printed && mi_proceeded
condition is true, it prints a ^running, and sets
running_result_record_printed. When mi_on_resume_1 gets called for the
second interpreter, running_result_record_printed is already set, so
^running is not printed there.
It took me a while to understand the relationship between these two
variables. I think that in the end, this is what we want to track:
1. When executing an MI command, take note if that command causes a
"proceed". This is done in mi_about_to_proceed.
2. In mi_on_resume_1, if the command indeed caused a "proceed", we want
to output a ^running record. And we want to remember that we did,
because...
3. Back in captured_mi_execute_command, if we did not output a
^running, we want to output a ^done.
Moving those two variables to the mi_interp struture appears to fix it.
Only for the interpreter doing the -exec-run command does the
running_result_record_printed flag get cleared, and therefore only or
that one does the ^running record get printed.
Add a new test for this, that does pretty much what the reproducer above
shows. Without the fix, the test fails because
mi_send_resuming_command_raw never sees the ^running record.
Change-Id: I63ea30e6cb61a8e1dd5ef03377e6003381a9209b
Tested-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
Consider the following scenario. We start gdb in TUI mode:
...
$ gdb -q -tui
...
and type ^R which gives us the reverse-isearch prompt in the cmd window:
...
(reverse-i-search)`':
...
and then type "foo", right-arrow-key, and ^C.
In TUI mode, gdb uses a custom rl_getc_function tui_getc.
When pressing the right-arrow-key, tui_getc:
- attempts to scroll the TUI src window, without any effect, and
- returns 0.
The intention of returning 0 is mentioned here in tui_dispatch_ctrl_char:
...
/* We intercepted the control character, so return 0 (which readline
will interpret as a no-op). */
return 0;
...
However, after this 0 is returned by the rl_read_key () call in
_rl_search_getchar, _rl_read_mbstring is called, which incorrectly interprets
0 as the first part of an utf-8 multibyte char, and tries to read the next
char.
In this state, the ^C takes effect and we run into a double free because
_rl_isearch_cleanup is called twice.
Both these issues need fixing independently, though after fixing the first we
no longer trigger the second.
The first issue is caused by the subtle difference between:
- a char array containing 0 chars, which is zero-terminated, and
- a char array containing 1 char, which is zero.
In mbrtowc terms, this is the difference between:
...
mbrtowc (&wc, "", 0, &ps);
...
which returns -2, and:
...
mbrtowc (&wc, "", 1, &ps);
...
which returns 0.
Note that _rl_read_mbstring calls _rl_get_char_len without passing it an
explicit length parameter, and consequently it cannot distinguish between the
two, and defaults to the "0 chars" choice.
Note that the same problem doesn't exist in _rl_read_mbchar.
Fix this by defaulting to the "1 char" choice in _rl_get_char_len:
...
- if (_rl_utf8locale && l > 0 && UTF8_SINGLEBYTE(*src))
+ if (_rl_utf8locale && l >= 0 && UTF8_SINGLEBYTE(*src))
...
The second problem happens when the call to _rl_search_getchar in
_rl_isearch_callback returns. At that point _rl_isearch_cleanup has already
been called from the signal handler, but we proceed regardless, using a cxt
pointer that has been freed.
Fix this by checking for "RL_ISSTATE (RL_STATE_ISEARCH)" after the call to
_rl_search_getchar:
...
c = _rl_search_getchar (cxt);
+ if (!RL_ISSTATE (RL_STATE_ISEARCH))
+ return 1;
...
Tested on x86_64-linux.
Approved-By: Chet Ramey <chet.ramey@case.edu>
PR tui/30056
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30056
Add a test-case that sets a prompt with color in TUI.
The line containing the prompt is shown by get_line_with_attrs as follows:
...
<fg:31>(gdb) <fg:default>
...
The 31 means red, but only for foreground colors, for background colors 41
means red.
Make this more readable by using color names for both foreground and
background, such that we have instead:
....
<fg:red>(gdb) <fg:default>
...
Tested on x86_64-linux.
I noticed in proc Term::_csi_m arguments that while parameters 7 and 27 are
supposed to set the reverse attribute to 1 and 0, in fact it's set to 1 in
both cases:
...
7 {
set _attrs(reverse) 1
}
...
27 {
set _attrs(reverse) 1
}
...
Fix this and add a regression test in gdb.tui/tuiterm.exp.
Tested on x86_64-linux.
I've had this patch for a while now and figured I'd update it and send
it. It changes MI commands to use a "const char * const" for their
argv parameter.
Regression tested on x86-64 Fedora 36.
Acked-By: Simon Marchi <simon.marchi@efficios.com>
The scoped_value_mark helper class was setting its internal
mark value to NULL to indicate that the value chain had already
been freed to mark.
However, value_mark() also returns NULL if the value chain is
empty at the time of call.
This lead to the situation that if the value chain was empty
at the time the scoped_value_mark was created, the class
would not correctly clean up the state when it was destroyed,
because it believed it had already been freed.
I noticed this because I was setting a watchpoint very early
in my debug session, and it was becoming a software watchpoint
rather than hardware. Running any command that called evaluate()
beforehand (such as 'x 0') would mean that a hardware watchpoint
was correctly used. After some careful examination of the
differences in execution, I noticed that values were being freed
later in the 'bad case', which lead me to notice the issue with
scoped_value_mark.
Remove the breakpoint_pointer_iterator layer. Adjust all users of
all_breakpoints and all_tracepoints to use references instead of
pointers.
Change-Id: I376826f812117cee1e6b199c384a10376973af5d
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Remove the bp_location_pointer_iterator layer. Adjust all users of
breakpoint::locations to use references instead of pointers.
Change-Id: Iceed34f5e0f5790a9cf44736aa658be6d1ba1afa
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Replace the hand-maintained linked lists of breakpoint locations with
and intrusive list.
- Remove breakpoint::loc, add breakpoint::m_locations.
- Add methods for the various manipulations that need to be done on the
location list, while maintaining reasonably good encapsulation.
- bp_location currently has a default constructor because of one use
in hoist_existing_locations. hoist_existing_locations now returns a
bp_location_list, and doesn't need the default-constructor
bp_location anymore, so remove the bp_location default constructor.
- I needed to add a call to clear_locations in delete_breakpoint to
avoid a use-after-free.
- Add a breakpoint::last_loc method, for use in
set_breakpoint_condition.
bp_location_range uses reference_to_pointer_iterator, so that all
existing callers of breakpoint::locations don't need to change right
now. It will be removed in the next patch.
The rest of the changes are to adapt the call sites to use the new
methods, of breakpoint::locations, rather than breakpoint::loc directly.
Change-Id: I25f7ee3d66a4e914a0540589ac414b3b820b6e70
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Add convenience first_loc methods to struct breakpoint (const and
non-const overloads). A subsequent patch changes the list of locations
to be an intrusive_list and makes the actual list private, so these
spots would need to change from:
b->loc
to something ugly like:
*b->locations ().begin ()
That would make the code much heavier and not readable. There is a
surprisingly big number of places that access the first location of
breakpoints. Whether this is correct, or these spots fail to consider
the possibility of multi-location breakpoints, I don't know. But
anyhow, I think that using this instead:
b->first_loc ()
conveys the intention better than the other two forms.
Change-Id: Ibbefe3e4ca6cdfe570351fe7e2725f2ce11d1e95
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Add three convenience methods to struct breakpoint:
- has_locations: returns true if the breakpoint has at least one
location
- has_single_location: returns true if the breakpoint has exactly one
location
- has_multiple_locations: returns true if the breakpoint has more than
one location
A subsequent patch changes the list of breakpoints to be an
intrusive_list, so all these spots would need to change. But in any
case, I think that this:
if (b->has_multiple_locations ())
conveys the intention better than:
if (b->loc != nullptr && b->loc->next != nullptr)
Change-Id: Ib18c3605fd35d425ef9df82cb7aacff1606c6747
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
The print_it method itself is const. In a subsequent patch, the
locations that come out of a const breakpoint will be const as well. It
will therefore be needed to make the last_loc output parameter const as
well. Make that change now to reduce the size of the following patches.
Change-Id: I7ed962950bc9582646e31e2e42beca2a1c9c5105
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Some implementations of breakpoint::check_status and
breakpoint::print_it do this:
struct breakpoint *b = bs->breakpoint_at;
bs->breakpoint_at is always the same as `this` (we can get convinced by
looking at the call sites of check_status and print_it), so it would
just be clearer to access fields through `this` instead.
Change-Id: Ic542a64fcd88e31ae2aad6feff1da278c7086891
Reviewed-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
I noticed some methods of syscall_catchpoint doing this:
struct gdbarch *gdbarch = loc->owner->gdbarch;
`loc` is the list of locations of this catchpoint. Logically, the owner
the locations are this catchpoint. So this just ends up getting
this->gdbarch. Remove the unnecessary indirection through the loc.
syscall_catchpoint::print_recreate does something slightly different,
getting its arch from the loc:
struct gdbarch *gdbarch = loc->gdbarch;
I suppose it's always going to be the same arch, so get it from the
catchpoint there too.
Change-Id: I6f6a6f8e0cd7cfb754cecfb6249e71ec12ba4855
Reviewed-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Add a checked_static_cast overload that works with references. A bad
dynamic cast with references throws std::bad_cast, it would be possible
to implement the new overload based on that, but it seemed simpler to
just piggy back off the existing function.
I found some potential uses of this new overload in amd-dbgapi-target.c,
update them to illustrate the use of the new overload. To build
amd-dbgapi-target.c, on needs the amd-dbgapi library, which I don't
expect many people to have. But I have it, and it builds fine here. I
did test the new overload by making a purposely bad cast and it did
catch it.
Change-Id: Id6b6a7db09fe3b4aa43cddb60575ff5f46761e96
Reviewed-By: Lancelot SIX <lsix@lancelotsix.com>
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
After this commit:
commit ed32754a8c
Date: Thu Mar 9 10:45:03 2023 +0100
[gdb/testsuite] Fix gdb.server/multi-ui-errors.exp for remote target
I noticed the occasional failure in gdb.server/multi-ui-errors.exp,
which looked like this:
(gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI
interrupt
(gdb)
Program received signal SIGINT, Interrupt.
0x00007ffff7d501e7 in nanosleep () from /lib64/libc.so.6
FAIL: gdb.server/multi-ui-errors.exp: interrupt (timeout)
PASS: gdb.server/multi-ui-errors.exp: interrupt arrived
p server_pid
$1 = 718174
(gdb) PASS: gdb.server/multi-ui-errors.exp: p server_pid
This is triggered by this code in gdb.server/multi-ui-errors.exp:
gdb_test "interrupt"
gdb_test_multiple "" "interrupt arrived" {
-re "Program received signal SIGINT, Interrupt\\.\r\n" {
pass $gdb_test_name
}
}
The problem here is that the first interrupt will trigger the prompt
to be printed, and then, after some time the inferior will be
interrupted.
However the default pattern for gdb_test includes a '$' end anchor.
If expect sees the prompt with nothing following it then everything is
fine, and the test passes.
However, if the interrupt is quick and so what expect sees is this:
(gdb)
Program received signal SIGINT, Interrupt.
0x00007ffff7d501e7 in nanosleep () from /lib64/libc.so.6
In this case the end anchor means that the gdb_test fails to match,
and eventually times out.
Fix this by passing -no-prompt-anchor to gdb_test.
Reviewed-By: Tom de Vries <tdevries@suse.de>
If a header file defining a static function is included in multiple source
files, each calling the function, and GDB is asked to jump to a line inside
that function, there would be multiple locations matching the target. The
solution in this commit is to select the location in the current symtab.
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Approved-By: Andrew Burgess <aburgess@redhat.com>
This patch augments the DAP launch request with some optional new
parameters that let the client control the command-line arguments and
the environment of the inferior.
Reviewed-By: Andrew Burgess <aburgess@redhat.com>
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
This adds two new attributes and three new methods to gdb.Inferior.
The attributes let Python code see the command-line arguments and the
name of "main". Argument setting is also supported.
The methods let Python code manipulate the inferior's environment
variables.
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
This adds a 'global_context' parse_and_eval to gdb.parse_and_eval.
This lets users request a parse that is done at "global scope".
I considered letting callers pass in a block instead, with None
meaning "global" -- but then there didn't seem to be a clean way to
express the default for this parameter.
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
