By putting the templates after their AVX512 counterparts, the AVX512
flavors will be picked by default. That way the need to always use {vex}
ceases to exist once respective CPU features (AVX512-VNNI or AVX512VL as
a whole) have been disabled. This way the need for the PseudoVexPrefix
attribute also disappears.
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE.
Based on initial work by Jedidiah Thompson
Co-authored-by: Jedidiah Thompson <wej22007@outlook.com>
Co-authored-by: Zac Walker <zac.walker@linaro.org>
As of commit ae89daecb1 ("x86: generalize disabling of sub-
architectures") there's no arbitrary subset of ISAs which can also be
disabled. This should have been reflected in documentation right away.
Since I failed to do so, correct this now.
Omitting predicate size specifier in vector form of {sq, uq, }{decp, incp} is deprecated and will be prohibited in a future release of the aarch64,
see https://developer.arm.com/documentation/ddi0602/2021-09/SVE-Instructions/DECP--vector---Decrement-vector-by-count-of-true-predicate-elements-.
This allows explicit size specifier, e.g. `decp z0.h, p0.h`, for predicate operand of these SVE instructions.
The existing behaviour of not requiring the specifier is preserved.
And the disasembly is with the specifier with this patch.
The GAS tests passed under our local tests.
opcodes/
* aarch64-asm.c: Modify `sve_size_hsd` encoding.
* aarch64-tbl.h (aarch64_opcode_table): Add QUALS's type OP_SVE_Vv_HSD
for decp, incp, sqdecp, sqincp, uqdecp and uqincp.
gas/
* testsuite/gas/aarch64/sve-movprfx_23.s: Update movprfx_23 testcase's
test_sametwo macro, where take the predicate size specifier.
* testsuite/gas/aarch64/sve-movprfx_23.d: Update movprfx_23 testcase's
expected disassembly.
* testsuite/gas/aarch64/sve-movprfx_23.l: Update movprfx_23 testcase's
expected assembler messages.
* testsuite/gas/aarch64/sve.s: Add sve testcase's instructions for
decp, incp, sqdecp, sqincp, uqdecp and uqincp, which take the
predicate size specifier.
* testsuite/gas/aarch64/sve.d: Update sve testcase's expected
disassembly.
Signed-off-by: CaiJingtao <caijingtao@huawei.com>
I noticed recently that se_rfmci, a VLE mode instruction, was being
accepted by non-VLE cpus, and also that se_rfmci by itself in a
section did not cause SHF_PPC_VLE to be set. ie. both testcases added
by this patch fail without the changes to tc-ppc.c here.
Also, VLE, SPE2 and LSP insns were not accepted by the assembler with
-many nor were SPE2 and LSP being disassembled with -Many.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Wrap long lines. Add
vle_opcodes when PPC_OPCODE_VLE or PPC_OPCODE_ANY. Simplify
disassembler index segment checks. Add LSP and SPE2 opcodes
when PPC_OPCODE_ANY too.
(md_assemble): Correct logic adding PPC_APUINFO_VLE and
SHF_PPC_VLE.
* testsuite/gas/ppc/se_rfmci.s
* testsuite/gas/ppc/se_rfmci.d,
* testsuite/gas/ppc/se_rfmci_bad.d: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble SPE2 and LSP insn
when -Many.
* ppc-opc.c (vle_opcodes <se_rfmci>): Comment.
Where sub and subf forms of an instruction exist we generally
disassemble to the extended insn sub form rather than the underlying
machine subf instruction. Do so for SPE evsubw and evsubiw too.
spe_ambiguous.d always was a bit too optimistic. There is no sensible
way to disassemble identical bytes back to different and original
source. Instead change the test to check -Mraw results.
gas/
* testsuite/gas/ppc/ppc.exp: Run spe_ambiguous test.
* testsuite/gas/ppc/spe.d: Expect evsubw and evsubiw rather than
evsubfw and evsubifw.
* testsuite/gas/ppc/spe_ambiguous.s: Test evnor form equivalent
to evnot.
* testsuite/gas/ppc/spe_ambiguous.d: Test Mraw.
opcodes/
* ppc-opc.c (powerpc_opcodes): Move evsubw before evsubfw and
evsubiw before evsubifw and mark EXT.
It has bothered me for a long time that we have disabled LSP (and SPE)
tests. Also the LSP test comment indicating there is something wrong
with get_powerpc_dialect. I don't think there is. Decoding of a VLE
instruction depends on whether the processor is in VLE mode (some
processors support both VLE and standard PPC) which we flag per
section with SHF_PPC_VLE for decoding when disassembling.
Background: Some versions of powerpc e200 have "Lightweight Signal
Processing" support, examples being e200z215 and e200z425. As far as
I can tell, LSP and SPE are mutually exclusive. This seems to be
borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw"
have the same encoding. So none of the processor descriptions in
ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we
want disassembly to work. I also could not find anything to suggest
that the LSP insns are enabled only in VLE mode, which means the LSP
insns should not be in vle_opcodes.
Fix all this by moving the LSP insns to their own table, and add a new
e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from
-mvle. (Yes, I know, as I said above some of the e200z4 processors
have LSP. Others have SPE. It's hard to choose good options. Think
of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow
adding the LSP insn set.
include/
* opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare.
(LSP_OP_TO_SEG): Define.
binutils/
* doc/binutils.texi: Update ppc docs.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash.
* doc/c-ppc.texi: Document e200 and lsp.
* testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2.
* testsuite/gas/ppc/lsp.d: Likewise, disassembly too.
* testsuite/gas/ppc/ppc.exp: Don't xfail lsp test.
opcodes/
* ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set
PPC_OPCODE_LSP for e200z4 or vle.
(ppc_parse_cpu): Mutually exclude LSP and SPE.
(LSP_OPCD_SEGS): Define.
(lsp_opcd_indices): New array.
(disassemble_init_powerpc): Init lsp_opcd_indices.
(lookup_lsp): New function.
(print_insn_powerpc): Call it.
* ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout.
(vle_opcodes): Move LSP opcodes to..
(lsp_opcodes): ..here, and sort.
(lsp_num_opcodes): New.
'H', 'Smstateen', 'Sscofpmf' and 'Sstc' are four privileged extensions with
their CSR definitions and 'Smepmp' is a privileged extension with additional
CSR bits.
Volume II: Privileged Architecture of the RISC-V ISA Manual states that the
privileged architecture requires the 'Zicsr' extension. However, current
GNU Binutils has no direct way whether the program has dependency to the
privileged architecture itself.
As a workaround, we should add implications from privileged extensions that
either add new CSRs, extend existing CSRs or depends on using CSRs.
This commit adds such implications for existing privileged extensions that
satisfy this condition.
gas/ChangeLog:
* testsuite/gas/riscv/march-imply-h.d: New test, at least for 'H'.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Add 'Zicsr'
implicications for privileged extensions 'H', 'Smstateen',
'Sscofpmf', 'Sstc' and 'Smepmp'.
* symbols.c (S_GET_VALUE): If the unresolved symbol is the fake
label provide a more helpful error message to the user.
(S_GET_VALUE_WHERE): Like S_GET_VALUE, but includes a file/line
number for error reporting purposes.
* symbols.h (S_GET_VALUE_WHERE): Prototype.
* write.c (fixup_segment): Use S_GET_VALUE_WHERE.
bfd/ChangeLog:
* bfd-in.h (bfd_hash_set_default_size): Add COMPRESS_UNKNOWN
enum value.
(struct compressed_type_tuple): New.
* bfd-in2.h (bfd_hash_set_default_size): Regenerate.
(struct compressed_type_tuple): Likewise.
* libbfd.c (ARRAY_SIZE): New macro.
(bfd_get_compression_algorithm): New function.
(bfd_get_compression_algorithm_name): Likewise.
gas/ChangeLog:
* as.c: Do not special-case, use the new functions.
ld/ChangeLog:
* emultempl/elf.em: Do not special-case, use the new functions.
* lexsup.c (elf_static_list_options): Likewise.
An earlier attempt (e68c3d59ac ["x86: better respect quotes in
parse_operands()"]) needed undoing (cc0f96357e ["x86: permit
parenthesized expressions again as addressing scale factor"]) as far its
effect here went. As indicated back then, the issue is the backwards
scanning of the operand string to find the matching opening parenthesis.
Switch to forward scanning, finding the last outermost unquoted opening
parenthesis (which is the one matching the trailing closing one).
Enable zlib-gnu compression for .gnu.debuglto_.debug_*. This differs
from zlib-gnu for .debug_* where the name is changed to .zdebug_*.
The name change isn't really needed.
bfd/
* elf.c (elf_fake_sections): Replace "." with ".z" in debug
section names only when name was ".d*", ie. ".debug_*".
(_bfd_elf_assign_file_positions_for_non_load): Likewise.
gas/
* write.c (compress_debug): Compress .gnu.debuglto_.debug_*
for zlib-gnu too. Compress .gnu.linkonce.wi.*.
Right now, when using LTO, the intermediate object files do contain
debug info in sections starting with .gnu.debuglto_ prefix and are
not compressed when --compress-debug-sections is used.
It's a mistake and we can save quite some disk space. The following
example comes from tramp3d when the corresponding LTO sections
are compressed with zlib:
$ bloaty tramp3d-v4-v2.o -- tramp3d-v4.o
FILE SIZE VM SIZE
-------------- --------------
+83% +10 [ = ] 0 [Unmapped]
-68.0% -441 [ = ] 0 .gnu.debuglto_.debug_line
-52.3% -759 [ = ] 0 .gnu.debuglto_.debug_line_str
-62.4% -3.24Ki [ = ] 0 .gnu.debuglto_.debug_abbrev
-64.8% -1.12Mi [ = ] 0 .gnu.debuglto_.debug_info
-88.8% -4.58Mi [ = ] 0 .gnu.debuglto_.debug_str
-27.7% -5.70Mi [ = ] 0 TOTAL
bfd/ChangeLog:
* elf.c (_bfd_elf_make_section_from_shdr): Compress all debug
info sections.
gas/ChangeLog:
* write.c (compress_debug): Compress also ".gnu.debuglto_.debug_"
if the compression algorithm is different from zlib-gnu.
There's no need for such workarounds anymore now that we use C99
uniformly. This addresses several testsuite failures encountered when
(cross-)building on a 32-bit host.
Although it had csr-dw-regnums.d (for CSRs), it didn't have DWARF register
number test for GPRs/FPRs.
This commit adds dw-regnums.{s,d} to test such registers.
gas/ChangeLog:
* testsuite/gas/riscv/dw-regnums.s: New DWARF register number test
for GPRs/FPRs.
* testsuite/gas/riscv/dw-regnums.d: Likewise.
This commit relaxes requirements to "fmv.s" instructions from 'F' to ('F'
or 'Zfinx'). The same applies to "fmv.d" and "fmv.q". Note that 'Zhinx'
extension already contains "fmv.h" instruction (as well as 'Zfh').
gas/ChangeLog:
* testsuite/gas/riscv/zfinx.s: Add "fmv.s" instruction.
* testsuite/gas/riscv/zfinx.d: Likewise.
* testsuite/gas/riscv/zdinx.s: Add "fmv.d" instruction.
* testsuite/gas/riscv/zdinx.d: Likewise.
* testsuite/gas/riscv/zqinx.d: Add "fmv.q" instruction.
* testsuite/gas/riscv/zqinx.s: Likewise.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Relax requirements to "fmv.[sdq]"
instructions to support those in 'Zfinx'/'Zdinx'/'Zqinx'.
This commit adds certain test cases for 'Zfinx'/'Zdinx'/'Zqinx' extensions
and reorganizes them, fixing coding style while improving coverage.
This is partially based on jiawei's 'Zhinx' testcases.
gas/ChangeLog:
* testsuite/gas/riscv/zfinx.s: Use different registers for
better encode space testing. Make indentation consistent.
Add tests for instruction with rounding mode. Change march
to minimum required extensions. Remove source line.
* testsuite/gas/riscv/zfinx.d: Likewise.
* testsuite/gas/riscv/zdinx.s: Likewise.
* testsuite/gas/riscv/zdinx.d: Likewise.
* testsuite/gas/riscv/zqinx.s: Likewise.
Also use even-numbered registers to use valid register pairs.
* testsuite/gas/riscv/zqinx.d: Likewise.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Signed-off-by: jiawei <jiawei@iscas.ac.cn>
Pre- and post-increment/decrement are side effects, the behavior of
which is undefined when combined with passing an address of the accessed
variable in the same function invocation. There's no need for the
increments here - simply adding 1 achieves the intended effect without
triggering compiler diagnostics (which are fatal with -Werror).
FENCE.TSO isn't an alias. ZIP and UNZIP in the long run likely are, but
presently they aren't. This fixes disassembly of these insns with
-Mno-aliases.
For disassembly to pick up aliases in favor of underlying insns (helping
readability in the common case), the aliases need to come ahead of the
"base" insns. Slightly more code movement is needed because of insns
with the same name needing to stay next to each other.
Note that the "rorw" alias entry also has the missing INSN_ALIAS added
here.
Clone a few testcases to exercise -Mno-aliases some more, better
covering the differences between the default and that disassembly mode.
At the example of
extractps $0, %xmm0, %xmm0
insertps $0, %xmm0, %eax
(both having respectively the same mistake of using the wrong kind of
destination register) it is easy to see that current behavior is far
from ideal: The former results in "unsupported instruction" for 32-bit
code simply because the 2nd template we have is a Cpu64 one. Instead we
should aim at emitting the "best" possible error, which will typically
be the one where we passed the largest number of checks. Generalize the
original "specific_error" approach by making it apply to the entire
matching loop, utilizing that line numbers increase as we pass further
checks.
While in some cases deriving an AT&T-style suffix from an Intel syntax
memory operand size specifier is necessary, in many cases this is not
only pointless, but has led to the introduction of various workarounds:
Excessive use of IgnoreSize and NoRex64 as well as the ToDword and
ToQword attributes. Suppress suffix derivation when we can clearly tell
that the memory operand's size isn't going to be needed to infer the
possible need for the low byte/word opcode bit or an operand size prefix
(0x66 or REX.W).
As a result ToDword and ToQword can be dropped entirely, plus a fair
number of IgnoreSize and NoRex64 can also be got rid of. Note that
IgnoreSize needs to remain on legacy encoded SIMD insns with GPR
operand, to avoid emitting an operand size prefix in 16-bit mode. (Since
16-bit code using SIMD insns isn't well tested, clone an existing
testcase just enough to cover a few insns which are potentially
problematic but are being touched here.)
Note that while folding the VCVT{,T}S{S,D}2SI templates, VCVT{,T}SH2SI
isn't included there. This is to fulfill the request of not allowing L
and Q suffixes there, despite the inconsistency with VCVT{,T}S{S,D}2SI.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
This patch adds support for the Zawrs ISA extension
("wrs.nto" and "wrs.sto" instructions).
The specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemPair extension, a collection of T-Head specific
two-GP-register memory operations.
The 'th' prefix and the "XTheadMemPair" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch introduces support for arbitrary literal instruction
arguments, that are not encoded in the opcode.
A typical use case for this feature would be an instruction that
applies an implicit shift by a constant value on an immediate
(that is a real operand). With this patch it is possible to make
this shift visible in the dissasembly and support such artificial
parameter as part of the asssembly code.
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMemIdx extension, a collection of T-Head specific
GPR memory access instructions.
The 'th' prefix and the "XTheadMemIdx" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 44 instructions
(BU,HU,WU only for loads (zero-extend instead of sign-extend)):
* {L,S}{D,W,WU,H,HU,B,BU}{IA,IB} rd, rs1, imm5, imm2
* {L,S}R{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
* {L,S}UR{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadFMemIdx extension, a collection of
T-Head-specific floating-point memory access instructions.
The 'th' prefix and the "XTheadFMemIdx" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadMac extension, a collection of
T-Head-specific multiply-accumulate instructions.
The 'th' prefix and the "XTheadMac" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCondMov extension, a collection of
T-Head-specific conditional move instructions.
The 'th' prefix and the "XTheadCondMov" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XThead{Ba,Bb,Bs} extensions, a collection of
T-Head-specific bitmanipulation instructions.
The 'th' prefix and the "XThead{Ba,Bb,Bs}" extension are documented
in a PR for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch introduces support for arbitrary signed or unsigned immediate
encoding formats. The formats have the form "XsN@S" and "XuN@S" with N
being the number of bits and S the LSB position.
For example an immediate field of 5 bytes that encodes a signed value
and is stored in the bits 24-20 of the instruction word can use the
format specifier "Xs5@20".
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadSync extension, a collection of
T-Head-specific multi-processor synchronization instructions.
The 'th' prefix and the "XTheadSync" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
T-Head has a range of vendor-specific instructions.
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the XTheadCmo extension, a collection of T-Head specific
cache management operations.
The 'th' prefix and the "XTheadCmo" extension are documented in a PR
for the RISC-V toolchain conventions ([1]).
In total XTheadCmo introduces the following 21 instructions:
* DCACHE.{C,CI,I}ALL
* DCACHE.{C,CI,I}{PA,VA,SW} rs1
* DCACHE.C{PAL1,VAL1} rs1
* ICACHE.I{ALL,ALLS}
* ICACHE.I{PA,VA} rs1
* L2CACHE.{C,CI,I}ALL
Contrary to Zicbom, the XTheadCmo instructions don't have a constant
displacement, therefore we have a different syntax for the arguments.
To clarify this is intended behaviour, there is a set of negative test
for Zicbom-style arguments in x-thead-cmo-fail.s.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
v2:
- Add missing DECLARE_INSN() list
- Fix ordering
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This patch introduces changes that allow the integration of vendor ISA
extensions:
* Define a list of vendor extensions (riscv_supported_vendor_x_ext)
where vendor extensions can be added
* Introduce a section with a table in the documentation where vendor
extensions can be added
To add a vendor extension that consists of instructions only,
the following things need to be done:
* Add the extension to the riscv_supported_vendor_x_ext list
* Add lookup entry in riscv_multi_subset_supports
* Documenting the extension in c-riscv.texti
* Add test cases for all instructions
* Add MATCH*/MASK* constants and DECLARE_INSN() for all instructions
* Add new instruction class to enum riscv_insn_class
* Define the instructions in riscv_opcodes
* Additional changes if necessary (depending on the instructions)
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
