I'm seeing timeouts from gdb.rust/traits.exp when we attempt to print
things with "maint print objfiles".
This happens for two reasons:
1 - GDB does not explicitly split each entry into its own line, but rather
relies on the terminal's width to insert line breaks.
2 - When running the GDB testsuite, such width may be unlimited, which will
prevent GDB from inserting any line breaks.
As a result, the output may be too lengthy and will come in big lines. Tweak
the support library to match the patterns line-by-line, which gives us more
time to match things. Also fix GDB's output to print one entry per line,
regardless of the terminal width.
A similar approach was used in another testcase using the same command (commit
eaeaf44cfd). With the new line breaks, we don't
need a particular pattern, so clean up that test as well.
gdb/ChangeLog:
2021-04-27 Luis Machado <luis.machado@linaro.org>
* psymtab.c (psymbol_functions::dump): Output newline.
* symmisc.c (dump_objfile): Likewise.
gdb/testsuite/ChangeLog:
2021-04-27 Luis Machado <luis.machado@linaro.org>
* gdb.base/maint.exp: Drop a pattern that is not needed.
* lib/gdb.exp (readnow): Match line-by-line.
This moves all the psymtab statistics printing code form symmisc.c to
psymtab.c. This changes the formatting of the output a little, but
considering that it is a maint command (and, I assume, a rarely used
one), this seems fine to me.
This change helps further dissociate the psymtab from the objfile. In
the end there will be no direct connect -- only via the
quick_symbol_functions interface.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_base_index_functions::print_stats): Add
print_bcache parameter.
* symfile-debug.c (objfile::print_stats): Add print_bcache
parameter.
* quick-symbol.h (struct quick_symbol_functions)
<print_stats>: Add print_bcache parameter.
* symmisc.c (print_symbol_bcache_statistics, count_psyms): Move
code to psymtab.c.
(print_objfile_statistics): Move psymtab code to psymtab.c.
* psymtab.c (count_psyms): Move from symmisc.c.
(psymbol_functions::print_stats): Print partial symbol and bcache
statistics. Add print_bcache parameter.
* objfiles.h (print_symbol_bcache_statistics): Don't declare.
(struct objfile) <print_stats>: Add print_bcache parameter.
* maint.c (maintenance_print_statistics): Update.
gdb/testsuite/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* gdb.base/maint.exp: Update "maint print statistics" output.
This introduces wrappers for each function in quick_symbol_functions.
The wrappers are methods on objfile, and are defined in
symfile-debug.c, so that they can use the symfile_debug variable.
Places that call the quick functions are all updated to call these new
wrapper methods.
gdb/ChangeLog
2021-03-20 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, expand_symtab_containing_pc)
(lookup_symbol_via_quick_fns, find_quick_global_symbol_language)
(basic_lookup_transparent_type_quick)
(find_pc_sect_compunit_symtab, find_symbol_at_address)
(find_line_symtab, global_symbol_searcher::expand_symtabs):
Update.
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_expand_symtabs): Update.
* symfile.c (symbol_file_add_with_addrs)
(expand_symtabs_matching, map_symbol_filenames): Update.
* symfile-debug.c (objfile::has_partial_symbols)
(objfile::find_last_source_symtab)
(objfile::forget_cached_source_info)
(objfile::map_symtabs_matching_filename, objfile::lookup_symbol)
(objfile::print_stats, objfile::dump)
(objfile::expand_symtabs_for_function)
(objfile::expand_all_symtabs)
(objfile::expand_symtabs_with_fullname)
(objfile::map_matching_symbols)
(objfile::expand_symtabs_matching)
(objfile::find_pc_sect_compunit_symtab)
(objfile::map_symbol_filenames)
(objfile::find_compunit_symtab_by_address)
(objfile::lookup_global_symbol_language): New methods.
(debug_sym_quick_functions): Remove.
(debug_sym_fns, install_symfile_debug_logging): Update.
* source.c (forget_cached_source_info_for_objfile)
(select_source_symtab): Update.
* objfiles.h (struct objfile): Add methods corresponding to
quick_symbol_functions.
* objfiles.c (objfile::has_partial_symbols): Move to
symfile-debug.c.
* linespec.c (iterate_over_all_matching_symtabs): Update.
* cp-support.c (add_symbol_overload_list_qualified): Update.
* ada-lang.c (add_nonlocal_symbols): Update.
Delete two more symbol/section related macros. This time it's
SYMBOL_SECTION and MSYMBOL_SECTION.
As with general_symbol_info::m_name it is not currently possible to
make general_symbol_info::m_section private as general_symbol_info
must remain a POD type.
But other than failing to make the new m_section private, this change
does what you'd expect, adds a get and set member function and updates
all users to use the new functions instead of the previous wrapper
macros.
There should be no user visible change after this commit.
gdb/ChangeLog:
* coff-pe-read.c (add_pe_forwarded_sym): Make use of section_index
and set_section_index member functions where appropriate.
* coffread.c (coff_symtab_read): Likewise.
(process_coff_symbol): Likewise.
* ctfread.c (set_symbol_address): Likewise.
* dwarf2/read.c (add_partial_symbol): Likewise.
(var_decode_location): Likewise.
* language.c: Likewise.
* minsyms.c (minimal_symbol_reader::record_full): Likewise.
(compact_minimal_symbols): Likewise.
(minimal_symbol_upper_bound): Likewise.
* objfiles.c (relocate_one_symbol): Likewise.
* psympriv.h (partial_symbol::obj_section): Likewise.
(partial_symbol::address): Likewise.
* psymtab.c (partial_symtab::add_psymbol): Likewise.
* stabsread.c (scan_file_globals): Likewise.
* symmisc.c (dump_msymbols): Likewise.
* symtab.c (general_symbol_info::obj_section): Likewise.
(fixup_section): Likewise.
(get_msymbol_address): Likewise.
* symtab.h (general_symbol_info::section): Rename to...
(general_symbol_info::m_section): ...this.
(general_symbol_info::set_section_index): New member function.
(general_symbol_info::section_index): Likewise.
(SYMBOL_SECTION): Delete.
(MSYMBOL_VALUE_ADDRESS): Make use of section_index and
set_section_index member functions where appropriate.
(MSYMBOL_SECTION): Delete.
(symbol::symbol): Update to initialize 'm_section'.
* xcoffread.c (read_xcoff_symtab): Make use of set_section_index.
(process_xcoff_symbol): Likewise.
These are likely not very useful, remove them.
gdb/ChangeLog:
* symmisc.c (std_in, std_out, std_err): Remove.
(_initialize_symmisc): Don't set std_in, std_out and std_err.
Change-Id: I140bfffd7fb655d39c32333bb53924b91b1eb13c
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
The "n_psyms" statistic in the per-objfile stats is not really needed,
but its use requires passing the objfile to add_psymbol. This patch
removes the field in favor of counting the psyms when needed.
Note that this is not exactly equivalent -- in the old approach, a
psymbol can in theory be created and then the psymtab discarded, which
would increment the counter. This does not seem very important to me.
I rewrote the code to count partial symbols; though TBH I think that
this information is not really very useful.
gdb/ChangeLog
2020-11-01 Tom Tromey <tom@tromey.com>
* symmisc.c (count_psyms): New function.
(print_objfile_statistics): Use it.
* psymtab.c (append_psymbol_to_list): Remove.
(partial_symtab::add_psymbol): Inline append_psymbol_to_list.
* objfiles.h (struct objstats) <n_psyms>: Remove.
Remove `TYPE_NAME`, changing all the call sites to use `type::name`
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_NAME): Remove. Change all cal sites to use
type::name instead.
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
Consider this test-case, consisting of header file hello.h:
...
inline static const char*
foo (void)
{
return "foo";
}
...
and source file hello.c:
...
int
main (void)
{
printf ("hello: %s\n", foo ());
return 0;
}
...
compiled with -g:
...
$ gcc hello.c -g
...
When trying to expand the partial symtab for hello.h:
...
$ gdb -batch \
-iex "set language c" \
a.out \
-ex "maint expand-symtabs hello.h" \
-ex "maint info psymtabs"
...
we in fact find that the partial symtab for hello.h (and corresponding
includer partial symtab hello.c) have not been expanded:
...
{ psymtab hello.h ((struct partial_symtab *) 0x27cf070)
readin no
...
{ psymtab hello.c ((struct partial_symtab *) 0x2cf09e0)
readin no
...
This is due to the recursively_search_psymtabs call in
psym_expand_symtabs_matching:
...
if (recursively_search_psymtabs (ps, objfile, domain,
lookup_name, symbol_matcher))
...
which always returns false for symbolless partial symtabs.
The same problem occurs with CUs where the dwarf is generated by gas
--gdwarf-2 for a foo.S: if we read such a test-case with -readnow, we'll have
a symbolless symtab for foo.S. But if we read the test-case with partial
symtabs, and expand those using "maint expand-symtabs", the foo.S psymtab
remains unexpanded.
Fix this by passing a NULL symbol_matcher and lookup_name to
expand_symtabs_matching in maintenance_expand_symtabs, and skipping the call
to recursively_search_psymtabs if symbol_matcher == NULL and
lookup_name == NULL.
Build and tested on x86_64-linux, with native.
In addition, tested test-case with target boards cc-with-gdb-index.exp,
cc-with-debug-names.exp and readnow.exp.
gdb/ChangeLog:
2020-04-14 Tom de Vries <tdevries@suse.de>
PR symtab/25720
* symmisc.c (maintenance_expand_symtabs): Call expand_symtabs_matching
with NULL symbol_matcher and lookup_name.
* psymtab.c (psym_expand_symtabs_matching): Handle NULL symbol_matcher
and lookup_name.
* dwarf2/read.c (dw2_expand_symtabs_matching)
(dw2_debug_names_expand_symtabs_matching): Same.
* symfile.h (struct quick_symbol_functions::expand_symtabs_matching):
Make lookup_name a pointer. Update comment.
* symtab.c (global_symbol_searcher::expand_symtabs): Handle
lookup_name being a pointer.
* symfile.c (expand_symtabs_matching): Same.
* symfile-debug.c (debug_qf_expand_symtabs_matching): Same.
* linespec.c (iterate_over_all_matching_symtabs): Same.
gdb/testsuite/ChangeLog:
2020-04-14 Tom de Vries <tdevries@suse.de>
PR symtab/25720
* gdb.base/maint-expand-symbols-header-file.c: New test.
* gdb.base/maint-expand-symbols-header-file.exp: New file.
* gdb.base/maint-expand-symbols-header-file.h: New test.
The type struct compunit_symtab contains two fields (disregarding field next)
that express relations with other compunit_symtabs: user and includes.
These fields are currently not printed with "maint info symtabs" and
"maint print symbols".
Fix this such that for "maint info symtabs" we print:
...
{ ((struct compunit_symtab *) 0x23e8450)
debugformat DWARF 2
producer (null)
dirname (null)
blockvector ((struct blockvector *) 0x23e8590)
+ user ((struct compunit_symtab *) 0x2336280)
+ ( includes
+ ((struct compunit_symtab *) 0x23e85e0)
+ ((struct compunit_symtab *) 0x23e8960)
+ )
{ symtab <unknown> ((struct symtab *) 0x23e85b0)
fullname (null)
linetable ((struct linetable *) 0x0)
}
}
...
And for "maint print symbols" we print:
...
-Symtab for file <unknown>
+Symtab for file <unknown> at 0x23e85b0
Read from object file /data/gdb_versions/devel/a.out (0x233ccf0)
Language: c
Blockvector:
block #000, object at 0x23e8530, 0 syms/buckets in 0x0..0x0
block #001, object at 0x23e84d0 under 0x23e8530, 0 syms/buckets in 0x0..0x0
+Compunit user: 0x2336300
+Compunit include: 0x23e8900
+Compunit include: 0x23dd970
...
Note: for user and includes we don't list the actual compunit_symtab address,
but instead the corresponding symtab address, which allows us to find that
symtab elsewhere in the output (given that we also now print the address of
symtabs).
gdb/ChangeLog:
2020-03-25 Tom de Vries <tdevries@suse.de>
* symtab.h (is_main_symtab_of_compunit_symtab): New function.
* symmisc.c (dump_symtab_1): Print user and includes fields.
(maintenance_info_symtabs): Same.
Andrew Burgess pointed out on irc that "maint info line-table" doesn't
properly align the table headers. This patch fixes the problem by
switching the table to use ui-out.
This required a small tweak to one test case, as ui-out will pad a
field using spaces, even at the end of a line.
gdb/ChangeLog
2020-03-20 Tom Tromey <tromey@adacore.com>
* symmisc.c (maintenance_print_one_line_table): Use ui_out.
gdb/testsuite/ChangeLog
2020-03-20 Tom Tromey <tromey@adacore.com>
* gdb.dwarf2/dw2-ranges-base.exp: Update regular expressions.
This commit brings support for the DWARF line table is_stmt field to
GDB. The is_stmt field is used by the compiler when a single source
line is split into multiple assembler instructions, especially if the
assembler instructions are interleaved with instruction from other
source lines.
The compiler will set the is_stmt flag false from some instructions
from the source lines, these instructions are not a good place to
insert a breakpoint in order to stop at the source line.
Instructions which are marked with the is_stmt flag true are a good
place to insert a breakpoint for that source line.
Currently GDB ignores all instructions for which is_stmt is false.
This is fine in a lot of cases, however, there are some cases where
this means the debug experience is not as good as it could be.
Consider stopping at a random instruction, currently this instruction
will be attributed to the last line table entry before this point for
which is_stmt was true - as these are the only line table entries that
GDB tracks. This can easily be incorrect in code with even a low
level of optimisation.
With is_stmt tracking in place, when stopping at a random instruction
we now attribute the instruction back to the real source line, even
when is_stmt is false for that instruction in the line table.
When inserting breakpoints we still select line table entries for
which is_stmt is true, so the breakpoint placing behaviour should not
change.
When stepping though code (at the line level, not the instruction
level) we will still stop at instruction where is_stmt is true, I
think this is more likely to be the desired behaviour.
Instruction stepping is, of course, unchanged, stepping one
instruction at a time, but we should now report more accurate line
table information with each instruction step.
The original motivation for this work was a patch posted by Bernd
here:
https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html
As part of that thread it was suggested that many issues would be
resolved if GDB supported line table views, this isn't something I've
attempted in this patch, though reading the spec, it seems like this
would be a useful feature to support in GDB in the future. The spec
is here:
http://dwarfstd.org/ShowIssue.php?issue=170427.1
And Bernd gives a brief description of the benefits here:
https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html
With that all said, I think that there is benefit to having proper
is_stmt support regardless of whether we have views support, so I
think we should consider getting this in first, and then building view
support on top of this.
The gdb.cp/step-and-next-inline.exp test is based off a test proposed
by Bernd Edlinger in this message:
https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html
gdb/ChangeLog:
* buildsym-legacy.c (record_line): Pass extra parameter to
record_line.
* buildsym.c (buildsym_compunit::record_line): Take an extra
parameter, reduce duplication in the line table, and record the
is_stmt flag in the line table.
* buildsym.h (buildsym_compunit::record_line): Add extra
parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Ignore
non-statement lines.
* dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass
this to the symtab builder.
(dwarf_finish_line): Pass extra parameter to dwarf_record_line_1.
(lnp_state_machine::record_line): Pass a suitable is_stmt flag
through to dwarf_record_line_1.
* infrun.c (process_event_stop_test): When stepping, don't stop at
a non-statement instruction, and only refresh the step info when
we land in the middle of a line's range. Also add an extra
comment.
* jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt
field.
* record-btrace.c (btrace_find_line_range): Only record lines
marked as is-statement.
* stack.c (frame_show_address): Show the frame address if we are
in a non-statement sal.
* symmisc.c (dump_symtab_1): Print the is_stmt flag.
(maintenance_print_one_line_table): Print a header for the is_stmt
column, and include is_stmt information in the output.
* symtab.c (find_pc_sect_line): Find lines marked as statements in
preference to non-statements.
(find_pcs_for_symtab_line): Prefer is-statement entries.
(find_line_common): Likewise.
* symtab.h (struct linetable_entry): Add is_stmt field.
(struct symtab_and_line): Likewise.
* xcoffread.c (arrange_linetable): Initialise is_stmt field when
arranging the line table.
gdb/testsuite/ChangeLog:
* gdb.cp/step-and-next-inline.cc: New file.
* gdb.cp/step-and-next-inline.exp: New file.
* gdb.cp/step-and-next-inline.h: New file.
* gdb.dwarf2/dw2-is-stmt.c: New file.
* gdb.dwarf2/dw2-is-stmt.exp: New file.
* gdb.dwarf2/dw2-is-stmt-2.c: New file.
* gdb.dwarf2/dw2-is-stmt-2.exp: New file.
* gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
This introduces a string cache on the per-BFD object, replacing the
macro and filename caches. Both of these caches just store strings,
so this consolidation by itself saves a little memory (about the size
of a bcache per objfile).
Then this patch switches some allocations on the objfile obstack to
use this bcache instead. This saves more space; and turns out to be a
bit faster as well.
Here are the before and after "maint time" + "maint space" results of
"file ./gdb":
Command execution time: 4.664021 (cpu), 4.728518 (wall)
Space used: 39190528 (+29212672 for this command)
Command execution time: 4.216209 (cpu), 4.107023 (wall)
Space used: 36667392 (+26689536 for this command)
The main interface to the string cache is a new pair of overloaded
methods, objfile::intern.
gdb/ChangeLog
2020-03-04 Tom Tromey <tom@tromey.com>
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics): Update.
* symfile.c (allocate_symtab): Use intern.
* psymtab.c (partial_symtab::partial_symtab): Use intern.
* objfiles.h (struct objfile_per_bfd_storage) <filename_cache,
macro_cache>: Remove.
<string_cache>: New member.
(struct objfile) <intern>: New methods.
* elfread.c (elf_symtab_read): Use intern.
* dwarf2/read.c (fixup_go_packaging): Intern package name.
(dwarf2_compute_name, dwarf2_physname)
(create_dwo_unit_in_dwp_v1, create_dwo_unit_in_dwp_v2): Intern
names.
(guess_partial_die_structure_name): Update.
(partial_die_info::fixup): Intern name.
(dwarf2_canonicalize_name): Change parameter to objfile. Intern
name.
(dwarf2_name): Intern name. Update.
* buildsym.c (buildsym_compunit::get_macro_table): Use
string_cache.
In this commit:
commit d9b3de22f3
Date: Wed May 27 14:44:29 2015 -0700
Add struct to record dwarf line number state machine.
I believe an unintended change was made to how we store the DWARF line
table, the end of sequence markers between sequences of lines were
lost from the line table.
This commit fixes this small oversight and restores the end of
sequence markers.
Given that we've survived this long without noticing is clearly an
indication that this isn't that serious, however, a later patch that I
am developing would benefit from having the markers in place, so I'd
like to restore them.
Having the markers also means that the output of 'maintenance info
line-table' now more closely reflects the DWARF line table.
I've taken this opportunity to improve how 'maintenance info
line-table' displays the end of sequence markers - it now uses the END
keyword, rather than just printing an entry with line number 0. So we
see this:
INDEX LINE ADDRESS
0 12 0x00000000004003b0
1 17 0x00000000004003b0
2 18 0x00000000004003b0
3 END 0x00000000004003b7
4 5 0x00000000004004a0
5 6 0x00000000004004a0
6 END 0x00000000004004a7
Instead of what we would have seen, which was this:
INDEX LINE ADDRESS
0 12 0x00000000004003b0
1 17 0x00000000004003b0
2 18 0x00000000004003b0
3 0 0x00000000004003b7
4 5 0x00000000004004a0
5 6 0x00000000004004a0
6 0 0x00000000004004a7
I've added a small test that uses 'maintenance info line-table' to
ensure that we don't regress this again.
gdb/ChangeLog:
* dwarf2read.c (lnp_state_machine::record_line): Include
end_sequence parameter in debug print out. Record the line if we
are at an end_sequence marker even if it's not the start of a
statement.
* symmisc.c (maintenance_print_one_line_table): Print end of
sequence markers with 'END' not '0'.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update line table parsing test.
* gdb.dwarf2/dw2-ranges-base.exp: Add new line table parsing test.
Change-Id: I002f872248db82a1d4fefdc6b51ff5dbf932d8a8
I went through most of the spots that include readline.h and, when
appropriate, either removed the include or changed it to include
tilde.h.
Note that remote-sim.c and bsd-kvm.c could probably include tilde.h
instead, but I did not change these. I think I can't build the
latter, and I didn't want to set up a sim build for the former.
Tested by rebuilding.
gdb/ChangeLog
2019-11-06 Tom Tromey <tom@tromey.com>
* tui/tui-interp.c: Don't include readline.h.
* tui/tui-hooks.c: Don't include readline.h.
* symmisc.c: Include tilde.h, not readline.h.
* symfile.c: Include tilde.h, not readline.h.
* source.c: Include tilde.h, not readline.h.
* solib.c: Include tilde.h, not readline.h.
* psymtab.c: Include tilde.h, not readline.h.
* exec.c: Include tilde.h, not readline.h.
* corelow.c: Include tilde.h, not readline.h.
* cli/cli-dump.c: Include tilde.h, not readline.h.
* cli/cli-cmds.c: Don't include readline.h.
Change-Id: I60487a190c43128b800ef77517d1ab42957571d7
In ELF, if a data symbol is defined in a shared library and used by
the main program, it will be subject to a "copy relocation". In this
scenario, the main program has a copy of the symbol in question, and a
relocation that tells ld.so to copy the data from the shared library.
Then the symbol in the main program is used to satisfy all references.
This patch changes gdb to handle this scenario. Data symbols coming
from ELF shared libraries get a special flag that indicates that the
symbol's address may be subject to copy relocation.
I looked briefly into handling copy relocations by looking at the
actual relocations in the main program, but this seemed difficult to
do with BFD.
Note that no caching is done here. Perhaps this could be changed if
need be; I wanted to avoid possible problems with either objfile
lifetimes and changes, or conflicts with the long-term (vapor-ware)
objfile splitting project.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* symmisc.c (dump_msymbols): Don't use MSYMBOL_VALUE_ADDRESS.
* ada-lang.c (lesseq_defined_than): Handle
LOC_STATIC.
* dwarf2read.c (dwarf2_per_objfile): Add can_copy
parameter.
(dwarf2_has_info): Likewise.
(new_symbol): Set maybe_copied on symbol when
appropriate.
* dwarf2read.h (dwarf2_per_objfile): Add can_copy
parameter.
<can_copy>: New member.
* elfread.c (record_minimal_symbol): Set maybe_copied
on symbol when appropriate.
(elf_symfile_read): Update call to dwarf2_has_info.
* minsyms.c (lookup_minimal_symbol_linkage): New
function.
* minsyms.h (lookup_minimal_symbol_linkage): Declare.
* symtab.c (get_symbol_address, get_msymbol_address):
New functions.
* symtab.h (get_symbol_address, get_msymbol_address):
Declare.
(SYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_ADDRESS): Handle
maybe_copied.
(struct symbol, struct minimal_symbol) <maybe_copied>:
New member.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
This series is revisit of Siddhesh Poyarekar's patch from back in
2012. The last status on the patch is in the following gdb-patches
thread:
https://sourceware.org/ml/gdb-patches/2012-08/msg00562.html
It appears that Tom approved the patch, but Jan had some issues
with a compiler error that made the test fail on -m32 test runs.
He wrote up a hand-tweaked .S file to deal with it. Siddesh said
he would update tests. Then nothing.
Siddesh and Jan have both moved on since.
The patch originally required a large precursor patch to work.
I have whittled this down to/rewritten the bare minimum, and this
first patch is the result, changing the type of TYPE_LENGTH
to ULONGEST from unsigned int.
The majority of the changes involve changing printf format
strings to use %s and pulongest instead of %d.
gdb/ChangeLog:
* ada-lang.c (ada_template_to_fixed_record_type_1): Use
%s/pulongest for TYPE_LENGTH instead of %d in format
strings.
* ada-typerint.c (ada_print_type): Likewise.
* amd64-windows-tdep.c (amd64_windows_store_arg_in_reg): Likewise.
* compile/compile-c-support.c (generate_register_struct): Likewise.
* gdbtypes.c (recursive_dump_type): Likewise.
* gdbtypes.h (struct type) <length>: Change type to ULONGEST.
* m2-typeprint.c (m2_array): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* riscv-tdep.c (riscv_type_alignment): Cast second argument
to std::min to ULONGEST.
* symmisc.c (print_symbol): Use %s/pulongest for TYPE_LENGTH
instead of %d in format strings.
* tracepoint.c (info_scope_command): Likewise.
* typeprint.c (print_offset_data::update)
(print_offset_data::finish): Likewise.
* xtensa-tdep.c (xtensa_store_return_value)
(xtensa_push_dummy_call): Likewise.
I noticed that there are still many places referring to non-const
blocks. This constifies all the remaining ones that I found that
could be constified.
In a few spots, this search found unused variables or fields. I
removed these. I've also removed some unnecessary casts to
"struct block *".
gdb/ChangeLog
2019-03-24 Tom Tromey <tom@tromey.com>
* c-exp.y (typebase): Remove casts.
* gdbtypes.c (lookup_unsigned_typename, )
(lookup_signed_typename): Remove cast.
* eval.c (parse_to_comma_and_eval): Remove cast.
* parse.c (write_dollar_variable): Remove cast.
* block.h (struct block) <superblock>: Now const.
* symfile-debug.c (debug_qf_map_matching_symbols): Update.
* psymtab.c (psym_map_matching_symbols): Make "block" const.
(map_block): Make "block" const.
* symfile.h (struct quick_symbol_functions)
<map_matching_symbols>: Constify block argument to "callback".
* symtab.c (basic_lookup_transparent_type_quick): Make "block"
const.
(find_pc_sect_compunit_symtab): Make "b" const.
(find_symbol_at_address): Likewise.
(search_symbols): Likewise.
* dwarf2read.c (dw2_lookup_symbol): Make "block" const.
(dw2_debug_names_lookup_symbol): Likewise.
(dw2_map_matching_symbols): Update.
* p-valprint.c (pascal_val_print): Remove "block".
* ada-lang.c (ada_add_global_exceptions): Make "b" const.
(aux_add_nonlocal_symbols): Make "block" const.
(resolve_subexp): Remove cast.
* linespec.c (iterate_over_all_matching_symtabs): Make "block"
const.
(iterate_over_file_blocks): Likewise.
* f-exp.y (%union) <bval>: Remove.
* coffread.c (patch_opaque_types): Make "b" const.
* spu-tdep.c (spu_catch_start): Make "block" const.
* c-valprint.c (print_unpacked_pointer): Remove "block".
* symmisc.c (dump_symtab_1): Make "b" const.
(block_depth): Make "block" const.
* d-exp.y (%union) <bval>: Remove.
* cp-support.h (cp_lookup_rtti_type): Update.
* cp-support.c (cp_lookup_rtti_type): Make "block" const.
* psymtab.c (psym_lookup_symbol): Make "block" const.
(maintenance_check_psymtabs): Make "b" const.
* python/py-framefilter.c (extract_sym): Make "sym_block" const.
(enumerate_locals, enumerate_args): Update.
* python/py-symtab.c (stpy_global_block): Make "block" const.
(stpy_static_block): Likewise.
* inline-frame.c (block_starting_point_at): Make "new_block"
const.
* block.c (find_block_in_blockvector): Make return type const.
(blockvector_for_pc_sect): Make "b" const.
(find_block_in_blockvector): Make "b" const.
I found a couple of spots that manually saved and restored the current
language. This patch changes them to use
scoped_restore_current_language.
Tested by the buildbot.
gdb/ChangeLog
2019-03-23 Tom Tromey <tom@tromey.com>
* linespec.c (get_current_search_block): Use
scoped_restore_current_language.
* symmisc.c (dump_symtab): Use scoped_restore_current_language.
This patch builds on the previous by enabling the `new' multidictionary
API. A lot of the hunks are simply textual replacements of "dict_"
with "mdict_" and similar transformations.
A word of warning, even with the use of multidictionaries, the code
still does not satisfactorily fix the reported problems with gdb/23712
(or gdb/23010). We still have additional changes to make before that
happens.
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dictionary.h (struct dictionary): Replace declaration with
multidictionary.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable)
(dict_free, dict_add_symbol, dict_add_pending, dict_empty)
(dict_iterator_first, dict_iterator_next, dict_iter_match_first)
(dict_iter_match_next, dict_size): Rename to "mdict_" versions
taking multidictionary argument.
[ALL_DICT_SYMBOLS]: Update for multidictionary.
* block.h (struct block) <dict>: Change to multidictionary
and rename `multidict'.
* block.c, buildsym.c, jit.c, mdebugread.c, objfiles.c,
symmisc.c: Update all dictionary references to multidictionary.
This introduces a new psymtab_storage class, which holds all
psymbol-related objects that are independent of the objfile. (This
latter contraint explains why psymbol_map was not moved; though this
could still be done with some work.)
This patch does not yet change where psymtab allocation is done --
that comes later. This just wraps everything in a single object to
make further transformations simpler.
Note that a shared_ptr is used to link from the objfile to the
psymtab_storage object. The end goal here is to allow a given symbol
reader to simply attach to the psymtab_storage object to the BFD, then
reuse it in later invocations; shared_ptr makes this simple to reason
about.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symmisc.c (print_symbol_bcache_statistics): Update.
(print_objfile_statistics): Update.
* symfile.c (reread_symbols): Update.
* psymtab.h (class psymtab_storage): New.
* psymtab.c (psymtab_storage): New constructor.
(~psymtab_storage): New destructor.
(require_partial_symbols): Update.
(ALL_OBJFILE_PSYMTABS_REQUIRED): Rewrite.
(find_pc_sect_psymtab, find_pc_sect_psymbol)
(match_partial_symbol, lookup_partial_symbol, dump_psymtab)
(psym_dump, recursively_search_psymtabs, psym_has_symbols)
(psym_find_compunit_symtab_by_address, sort_pst_symbols)
(start_psymtab_common, end_psymtab_common)
(add_psymbol_to_bcache, add_psymbol_to_list, init_psymbol_list)
(allocate_psymtab): Update.
(psymtab_storage::discard_psymtab): Rename from discard_psymtab.
Update.
(dump_psymtab_addrmap, maintenance_print_psymbols)
(maintenance_check_psymtabs): Update.
(class objfile_psymtabs): Move to objfiles.h.
* psympriv.h (discard_psymtab): Now inline.
(psymtab_discarder::psymtab_discarder): Update.
(psymtab_discarder::~psymtab_discarder): Update.
(ALL_OBJFILE_PSYMTABS): Rewrite.
* objfiles.h (struct objfile) <psymtabs, psymtabs_addrmap,
free_psymtabs, psymbol_cache, global_psymbols, static_psymbols>:
Remove fields.
<partial_symtabs>: New field.
(class objfile_psymtabs): Move from psymtab.h. Update.
* objfiles.c (objfile::objfile): Initialize partial_symtabs, not
psymbol_cache.
(objfile::~objfile): Don't destroy psymbol_cache.
* mdebugread.c (parse_partial_symbols): Update.
* dwarf2read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(process_psymtab_comp_unit_reader, dwarf2_build_psymtabs_hard)
(add_partial_subprogram, dwarf2_ranges_read): Update.
* dwarf-index-write.c (write_address_map)
(write_one_signatured_type, recursively_write_psymbols)
(class debug_names, class debug_names, write_psymtabs_to_index):
Update.
This removes ALL_OBJFILE_FILETABS, replacing its uses with ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Use compunit_filetabs.
* source.c (forget_cached_source_info_for_objfile): Use
compunit_filetabs.
* objfiles.h (ALL_OBJFILE_FILETABS): Remove.
(ALL_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Use compunit_filetabs.
This removes ALL_COMPUNIT_FILETABS, replacing its uses with ranged for
loops.
Because this is still used in the ALL_OBJFILE_FILETABS macro, in some
places a declaration had to be removed or renamed to avoid shadowing.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.h (ALL_COMPUNIT_FILETABS): Remove.
(compunit_filetabs): New.
* symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use
compunit_filetabs.
(info_sources_command, make_source_files_completion_list): Remove
declaration.
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Remove declaration.
(maintenance_info_symtabs): Use compunit_filetabs.
(maintenance_info_line_tables): Likewise.
* source.c (select_source_symtab): Change local variable name.
(forget_cached_source_info_for_objfile): Remove declaration.
* objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Remove declaration.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove
declaration.
* maint.c (count_symtabs_and_blocks): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Remove declaration.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
compunit_filetabs.
This removes the ALL_MSYMBOLS and ALL_OBJFILE_MSYMBOLS macros,
replacing their uses with ranged for loops.
In a couple of spots, a new declaration was needed in order to work
around shadowing; these are just temporary and are removed in a
subsequent patch.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (search_symbols)
(default_collect_symbol_completion_matches_break_on): Use
objfile_msymbols.
* ada-lang.c (ada_lookup_simple_minsym)
(ada_collect_symbol_completion_matches): Use objfile_msymbols.
* minsyms.c (find_solib_trampoline_target): Use objfile_msymbols.
* hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Use
objfile_msymbols.
* coffread.c (coff_symfile_read): Use objfile_msymbols.
* symmisc.c (dump_msymbols): Use objfile_msymbols.
* objc-lang.c (find_methods): Use objfile_msymbols.
(info_selectors_command, info_classes_command): Likewise.
* stabsread.c (scan_file_globals): Use objfile_msymbols.
* objfiles.h (class objfile_msymbols): New.
(ALL_OBJFILE_MSYMBOLS): Remove.
(ALL_MSYMBOLS): Remove.
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
This removes the ALL_PSPACE_OBJFILES macro in favor of ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* probe.c (parse_probes_in_pspace): Use all_objfiles.
* guile/scm-progspace.c (gdbscm_progspace_objfiles): Use
all_objfiles.
* objfiles.h (ALL_PSPACE_OBJFILES): Remove.
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics, maintenance_print_objfiles)
(maintenance_info_symtabs, maintenance_check_symtabs)
(maintenance_expand_symtabs, maintenance_info_line_tables): Use
all_objfiles.
* source.c (forget_cached_source_info): Use all_objfiles.
* symfile-debug.c (set_debug_symfile): Use all_objfiles.
* elfread.c (elf_gnu_ifunc_resolve_by_cache)
(elf_gnu_ifunc_resolve_by_got): Use all_objfiles.
* objfiles.c (update_section_map): Use all_objfiles.
(shared_objfile_contains_address_p): Likewise.
* psymtab.c (maintenance_info_psymtabs): Use all_objfiles.
* python/py-progspace.c (pspy_get_objfiles): Use all_objfiles.
I noticed a few places where a Usage line in gdb did not use upper
case for metasyntactic variables. This patch fixes all the instances
I found.
Tested on x86-64 Fedora 28.
gdb/ChangeLog
2019-01-04 Tom Tromey <tom@tromey.com>
* compile/compile.c (_initialize_compile): Use upper case for
metasyntactic variables.
* symmisc.c (_initialize_symmisc): Use upper case for
metasyntactic variables.
* psymtab.c (_initialize_psymtab): Use upper case for
metasyntactic variables.
* demangle.c (demangle_command): Use upper case for metasyntactic
variables.
(_initialize_demangler): Likewise.
* ax-gdb.c (_initialize_ax_gdb): Use upper case for metasyntactic
variables.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
TYPE_TAG_NAME has been an occasional source of confusion and bugs. It
seems to me that it is only useful for C and C++ -- but even there,
not so much, because at least with DWARF there doesn't seem to be any
way to wind up with a type where the name and the tag name are both
non-NULL and different.
So, this patch removes TYPE_TAG_NAME entirely. This should save a
little memory, but more importantly, it simplifies this part of gdb.
A few minor test suite adjustments were needed. In some situations
the new code does not yield identical output to the old code.
gdb/ChangeLog
2018-06-01 Tom Tromey <tom@tromey.com>
* valops.c (enum_constant_from_type, value_namespace_elt)
(value_maybe_namespace_elt): Update.
* valarith.c (find_size_for_pointer_math): Update.
* target-descriptions.c (make_gdb_type): Update.
* symmisc.c (print_symbol): Update.
* stabsread.c (define_symbol, read_type)
(complain_about_struct_wipeout, add_undefined_type)
(cleanup_undefined_types_1): Update.
* rust-lang.c (rust_tuple_type_p, rust_slice_type_p)
(rust_range_type_p, val_print_struct, rust_print_struct_def)
(rust_internal_print_type, rust_composite_type)
(rust_evaluate_funcall, rust_evaluate_subexp)
(rust_inclusive_range_type_p): Update.
* python/py-type.c (typy_get_tag): Update.
* p-typeprint.c (pascal_type_print_base): Update.
* mdebugread.c (parse_symbol, parse_type): Update.
* m2-typeprint.c (m2_long_set, m2_record_fields, m2_enum):
Update.
* guile/scm-type.c (gdbscm_type_tag): Update.
* go-lang.c (sixg_string_p): Update.
* gnu-v3-abi.c (build_gdb_vtable_type, build_std_type_info_type):
Update.
* gdbtypes.h (struct main_type) <tag_name>: Remove.
(TYPE_TAG_NAME): Remove.
* gdbtypes.c (type_name_no_tag): Simplify.
(check_typedef, check_types_equal, recursive_dump_type)
(copy_type_recursive, arch_composite_type): Update.
* f-typeprint.c (f_type_print_base): Update. Print "Type" prefix
in summary mode when needed.
* eval.c (evaluate_funcall): Update.
* dwarf2read.c (fixup_go_packaging, read_structure_type)
(process_structure_scope, read_enumeration_type)
(read_namespace_type, read_module_type, determine_prefix): Update.
* cp-support.c (inspect_type): Update.
* coffread.c (process_coff_symbol, decode_base_type): Update.
* c-varobj.c (c_is_path_expr_parent): Update.
* c-typeprint.c (c_type_print_base_struct_union): Update.
(c_type_print_base_1): Update. Print struct/class/union/enum in
summary when using C language.
* ax-gdb.c (gen_struct_ref, gen_namespace_elt)
(gen_maybe_namespace_elt): Update.
* ada-lang.c (ada_type_name): Simplify.
(empty_record, ada_template_to_fixed_record_type_1)
(template_to_static_fixed_type)
(to_record_with_fixed_variant_part, ada_check_typedef): Update.
gdb/testsuite/ChangeLog
2018-06-01 Tom Tromey <tom@tromey.com>
* gdb.xml/tdesc-regs.exp (load_description): Update expected
results.
* gdb.dwarf2/method-ptr.exp: Set language to C++.
* gdb.dwarf2/member-ptr-forwardref.exp: Set language to C++.
* gdb.cp/typeid.exp (do_typeid_tests): Update type_re.
* gdb.base/maint.exp (maint_pass_if): Update.
Luis Machado