alias_command does not detect that the prefixes of the alias command and the
aliased command are not matching: it is comparing the alias prefix
with itself, instead of comparing it with the aliased command prefix.
This causes either the alias command to silently do nothing,
or to have GDB asserting:
(gdb) alias assigne imprime limite-elements = set print elements
../../binutils-gdb/gdb/cli/cli-cmds.c:1552: internal-error: void alias_command(const char*, int): Assertion `c_command != NULL && c_command != (struct cmd_list_element *) -1' failed.
A problem internal to GDB has been detected,
Fix the logic, and update gdb.base/alias.exp to test these cases.
gdb/ChangeLog
2019-06-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (alias_command): Compare the alias prefix
with the command prefix.
gdb/testsuite/ChangeLog
2019-06-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Test non matching/non existing prefixes.
Basically every caller of check_for_argument needs to skip space after
the argument. This patch makes check_for_argument do it itself.
Suggested by Philippe Waroquiers.
gdb/ChangeLog:
2019-06-13 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Remove skip_spaces call.
* breakpoint.c (watch_maybe_just_location): Remove skip_spaces
call.
* cli/cli-cmds.c (apropos_command): Remove skip_spaces call.
* cli/cli-utils.c (extract_info_print_args): Remove skip_spaces
calls.
(check_for_argument): Skip spaces after argument.
ARI pointed out that a recent patch introduced a call to "warning"
with a string that ended in a newline:
https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html
This is generally forbidden, I believe, because warning adds its own
newline.
This patch removes all of the trailing newlines I was able to find. I
searched for 'warning (.*\\n"' and then fixed the ones where the
newline appeared at the end of the string (some had internal
newlines).
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning
with a newline.
* guile/guile.c (handle_boot_error): Don't end warning with a
newline.
* cli/cli-cmds.c (exit_status_set_internal_vars): Don't end
warning with a newline.
* s12z-tdep.c (s12z_skip_prologue): Don't end warning with a
newline.
(s12z_frame_cache): Likewise.
* dwarf-index-cache.c (index_cache::store): Don't end warning with
a newline.
* solib-svr4.c (disable_probes_interface): Don't end warning with
a newline.
* nat/fork-inferior.c (fork_inferior): Don't end warning with a
newline.
* python/python.c (do_finish_initialization): Don't end warning
with a newline.
gdb/gdbserver/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* remote-utils.c (look_up_one_symbol, relocate_instruction): Don't
end warning with a newline.
* linux-s390-low.c (s390_get_wordsize): Don't end warning with a
newline.
* thread-db.c (attach_thread): Don't end warning with a newline.
(thread_db_notice_clone): Likewise.
* tracepoint.c (gdb_agent_helper_thread): Don't end warning with a
newline.
* linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't
end warning with a newline.
The "help" command can output long list of command names or classes.
Use the title style to style the command names or classes to make
the output more readable.
Similarly, change "apropos" command to also style the command names.
It is sometimes unclear why "apropos REGEXP" lists some commands,
and then the user has to manually do 'help command' for all commands
listed by "apropos" to see more details about the matching commands.
=> Add an optional flag -v so that "apropos -v REGEXP":
* outputs the full documentation of matching commands.
* highlights the documentation parts matching REGEXP.
The pipe command allows to run a GDB command, and pipe its output
to a shell command:
(gdb) help pipe
Send the output of a gdb command to a shell command.
Usage: | [COMMAND] | SHELL_COMMAND
Usage: | -d DELIM COMMAND DELIM SHELL_COMMAND
Usage: pipe [COMMAND] | SHELL_COMMAND
Usage: pipe -d DELIM COMMAND DELIM SHELL_COMMAND
Executes COMMAND and sends its output to SHELL_COMMAND.
The -d option indicates to use the string DELIM to separate COMMAND
from SHELL_COMMAND, in alternative to |. This is useful in
case COMMAND contains a | character.
With no COMMAND, repeat the last executed command
and send its output to SHELL_COMMAND.
(gdb)
For example:
(gdb) pipe print some_data_structure | grep -B3 -A3 something
The pipe character is defined as an alias for pipe command, so that
the above can be typed as:
(gdb) | print some_data_structure | grep -B3 -A3 something
If no GDB COMMAND is given, then the previous command is relaunched,
and its output is sent to the given SHELL_COMMAND.
This also defines convenience vars $_shell_exitcode and $_shell_exitsignal
to record the exit code and exit signal of the last shell command
launched by GDB e.g. by "shell", "pipe", ...
gdb/ChangeLog
2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (pipe_command): New function.
(_initialize_cli_cmds): Call add_com for pipe_command.
Define | as an alias for pipe.
(exit_status_set_internal_vars): New function.
(shell_escape): Call exit_status_set_internal_vars.
cli/cli-decode.c (find_command_name_length): Recognize | as
a single character command.
When building gdb on ubuntu 16.04 with gcc 5.4.0, and running the gdb
testsuite we run into:
...
FAIL: gdb.linespec/explicit.exp: complete after -line: \
cmd complete "b -line argument " (timeout)
...
The failure is reproducible outside the testsuite like this:
...
$ gdb -q build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit \
-ex "complete b -line argument"
Reading symbols from \
build/gdb/testsuite/outputs/gdb.linespec/explicit/explicit...
terminate called after throwing an instance of 'std::length_error'
what(): basic_string::_M_create
Aborted (core dumped)
...
The problem is here in complete_command:
...
completion_result result = complete (arg, &word, "e_char);
std::string arg_prefix (arg, word - arg);
if (result.number_matches != 0)
...
The problem is that the word variable is not initialized when
result.number_matches == 0, but the variable is still used in the arg_prefix
initialization.
Fix this by guarding the arg_prefix initialization with the
'result.number_matches != 0' test.
Build and tested on x86_64-linux.
gdb/ChangeLog:
2019-05-21 Tom de Vries <tdevries@suse.de>
PR cli/24587
* cli/cli-cmds.c (complete_command): Fix use of unitialized variable.
Extract completion logic from CLI complete_command() into a new
helper function complete().
gdb/Changelog:
* completer.h (complete): New function.
* completer.c (complete): Likewise.
* cli/cli-cmds.c: (complete_command): Update to use new complete()
function defined in completer.h.
gdb/ChangeLog
2019-04-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (_initialize_cli_cmds): Move "shell" "!" alias
close to the add_com "shell".
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
A customer noticed some mildly odd MI output, where CLI output was
split into multiple MI strings at unusual boundaries, like this:
~"$1 = (b => true"
~", p => 0x407260"
This is technically correct according to the MI spec, but still
unusual, in that there's no particular reason for the string to be
split where it is.
I tracked this down to a call to gdb_flush in generic_val_print.
Then, I went through all calls to gdb_flush and removed the ones I
thought were superfluous. In particular:
* Any call in the value-printing code;
* Likewise the type-printing code (just a single call); and
* Any call that immediately followed a printf that obviously
ended with a newline, my belief being that gdb's standard output
streams are line buffered (by inheriting the behavior from stdio)
Regression tested on x86-64 Fedora 29.
I didn't add a new test case. I tend to think we don't necessarily
want to specify this behavior in the tests. Let me know what you
think of this.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach)
(windows_nat_target::detach): Don't call gdb_flush.
* valprint.c (generic_val_print, val_print, val_print_string):
Don't call gdb_flush.
* utils.c (defaulted_query): Don't call gdb_flush.
* typeprint.c (print_type_scalar): Don't call gdb_flush.
* target.c (target_announce_detach): Don't call gdb_flush.
* sparc64-tdep.c (adi_print_versions): Don't call gdb_flush.
* remote.c (extended_remote_target::attach): Don't call
gdb_flush.
* procfs.c (procfs_target::detach): Don't call gdb_flush.
* printcmd.c (do_examine): Don't call gdb_flush.
(info_display_command): Don't call gdb_flush.
* p-valprint.c (pascal_val_print): Don't call gdb_flush.
* nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush.
* memattr.c (info_mem_command): Don't call gdb_flush.
* mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush.
* m2-valprint.c (m2_val_print): Don't call gdb_flush.
* infrun.c (follow_exec, handle_command): Don't call gdb_flush.
* inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush.
* hppa-tdep.c (unwind_command): Don't call gdb_flush.
* gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush.
(gnu_nat_target::detach): Don't call gdb_flush.
* f-valprint.c (f_val_print): Don't call gdb_flush.
* darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush.
* cli/cli-script.c (read_command_lines): Don't call gdb_flush.
* cli/cli-cmds.c (shell_escape, print_disassembly): Don't call
gdb_flush.
* c-valprint.c (c_val_print): Don't call gdb_flush.
* ada-valprint.c (ada_print_scalar): Don't call gdb_flush.
When printing source lines with calls to print_source_lines we need to
pass a start line number and an end line number. The end line number
is calculated by calling get_lines_to_list and adding this value to
the start line number. For example this code from list_command:
print_source_lines (cursal.symtab, first,
first + get_lines_to_list (), 0);
The problem is that get_lines_to_list returns a value based on the
GDB setting `set listsize LISTSIZE`. By default LISTSIZE is 10,
however, its also possible to set LISTSIZE to unlimited, in which
case get_lines_to_list will return INT_MAX.
As the parameter signature for print_source_lines is:
void print_source_lines (struct symtab *, int, int,
print_source_lines_flags);
and `first` in the above code is an `int`, then when LISTSIZE is
`unlimited` the above code will result in signed integer overflow,
which is undefined.
The solution in this patch is a new class source_lines_range that can
be constructed from a single line number and a direction (forward or
backward). The range is then constructed from the line number and the
value of get_lines_to_list.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Pass a source_lines_range to
print_source_lines.
* source.c (print_source_lines_base): Update line number check.
(print_source_lines): New function.
(source_lines_range::source_lines_range): New function.
* source.h (class source_lines_range): New class.
(print_source_lines): New declaration.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This adds a function that can be used to reset terminal styles,
regardless of what style the low-level output routines currently think
is applied.
This is used to make "echo" and "printf" work properly when emitting
ANSI terminal escapes -- now gdb will reset the style at the end of
the command.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (reset_terminal_style): Declare.
* utils.c (can_emit_style_escape): New function.
(set_output_style): Use it.
(reset_terminal_style): New function.
* printcmd.c (printf_command): Call reset_terminal_style.
* cli/cli-cmds.c (echo_command): Call reset_terminal_style.
I noticed several places in gdb that were using getenv("SHELL") and
then falling back to "/bin/sh" if it returned NULL. This unifies
these into a single function.
gdb/ChangeLog
2018-10-27 Tom Tromey <tom@tromey.com>
* procfs.c (procfs_target::create_inferior): Use get_shell.
* cli/cli-cmds.c (shell_escape): Use get_shell.
* windows-nat.c (windows_nat_target::create_inferior): Use
get_shell.
* common/pathstuff.c (get_shell): New function.
* nat/fork-inferior.c (SHELL_FILE, get_startup_shell): Remove.
(fork_inferior): Use get_shell.
* common/pathstuff.h (get_shell): Declare.
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
I noticed a couple of unnecessary casts in cli-cmds.c. This patch
removes them.
Tested by rebuilding. I'm checking this in.
gdb/ChangeLog
2018-09-05 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (shell_escape, edit_command): Remove cast.
This patch adds support for disassembly of blocks with non-contiguous
ranges. These blocks are printed as follows:
(gdb) disassemble foo
Dump of assembler code for function foo:
Address range 0x401136 to 0x401151:
0x0000000000401136 <+0>: push %rbp
0x0000000000401137 <+1>: mov %rsp,%rbp
0x000000000040113a <+4>: callq 0x401134 <bar>
0x000000000040113f <+9>: mov 0x2eef(%rip),%eax # 0x404034 <e>
0x0000000000401145 <+15>: test %eax,%eax
0x0000000000401147 <+17>: je 0x40114e <foo+24>
0x0000000000401149 <+19>: callq 0x401128 <foo+4294967282>
0x000000000040114e <+24>: nop
0x000000000040114f <+25>: pop %rbp
0x0000000000401150 <+26>: retq
Address range 0x401128 to 0x401134:
0x0000000000401128 <+-14>: push %rbp
0x0000000000401129 <+-13>: mov %rsp,%rbp
0x000000000040112c <+-10>: callq 0x401126 <baz>
0x0000000000401131 <+-5>: nop
0x0000000000401132 <+-4>: pop %rbp
0x0000000000401133 <+-3>: retq
End of assembler dump.
This is an actual dump from the test case that I constructed for
this work. The ranges are printed in the order encountered in the
debug info. For the above example, note that the second range occupies
lower addresses than the first range.
Functions with contiguous ranges are still printed as follows:
(gdb) disassemble main
Dump of assembler code for function main:
0x0000000000401151 <+0>: push %rbp
0x0000000000401152 <+1>: mov %rsp,%rbp
0x0000000000401155 <+4>: callq 0x401136 <foo>
0x000000000040115a <+9>: mov $0x0,%eax
0x000000000040115f <+14>: pop %rbp
0x0000000000401160 <+15>: retq
End of assembler dump.
gdb/ChangeLog:
* cli/cli-cmds.c (block.h): Include.
(print_disassembly): Handle printing of non-contiguous blocks.
(disassemble_current_function): Likewise.
(disassemble_command): Likewise.
I happened to notice recently that "gdb --version" says:
GNU gdb (GDB) 8.0.50.20170911-git
Copyright (C) 2017 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
This is a bit on the wordy side, but also references interactive
commands, which I think doesn't really make sense for --version.
This patch removes some text from --version, while leaving it in the
"show version" output. It also adds a newline between the URLs and
the "For help, ..." text, because I thought that was easier to read.
Finally, it indents one of the URLs, since that was simpler to read,
but not the other URL, because the current format is specified by the
GNU coding standards section on "--version".
Now the --version output looks like:
GNU gdb (GDB) 8.1.50.20180511-git
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Tested by the buildbot.
gdb/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (show_version): Update.
* top.c (print_gdb_version): Add "interactive" parameter.
Update.
* main.c (captured_main_1): Update.
* top.h (print_gdb_version): Add "interactive" parameter and a
comment.
gdb/testsuite/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
* gdb.base/default.exp: Update expected "show version" output.
This changes openp, source_full_path_of, and find_and_open_source to
take a unique_xmalloc_ptr, rather than a char*, as an outgoing
argument type. This simplifies the API, ownership-wise, and allows
for the removal of some cleanups.
gdb/ChangeLog
2018-02-14 Tom Tromey <tom@tromey.com>
* symfile.c (symfile_bfd_open): Update.
* source.h (openp, source_full_path_of, find_and_open_source):
Change argument type to unique_xmalloc_ptr.
* source.c (openp): Take a unique_xmalloc_ptr.
(source_full_path_of, find_and_open_source): Likewise.
(open_source_file, symtab_to_fullname): Update.
* solist.h (struct target_so_ops) <find_and_open_solib>: Take a
unique_xmalloc_ptr.
* solib.c (solib_find_1): Use unique_xmalloc_ptr.
(exec_file_find): Update.
* psymtab.c (psymtab_to_fullname): Update.
* nto-tdep.h (nto_find_and_open_solib): Update.
* nto-tdep.c (nto_find_and_open_solib): Change temp_path to a
unique_xmalloc_ptr.
* exec.c (exec_file_attach): Update.
* dwarf2read.c (try_open_dwop_file): Use unique_xmalloc_ptr.
* cli/cli-cmds.c (find_and_open_script): Use unique_xmalloc_ptr.
gdb/ChangeLog:
* defs.h (enum openp_flags): New enum.
(OPF_TRY_CWD_FIRST, OPF_SEARCH_IN_PATH, OPF_RETURN_REALPATH):
Move to enum openp_flags.
(openp_flags): New enum flags.
(openp): Change parameter type to openp_flags.
* source.c (openp): Change parameter type to openp_flags.
* cli/cli-cmds.c (find_and_open_script): Use openp_flags.
* dwarf2read.c (try_open_dwop_file): Use openp_flags.
The "x", "list", and "show commands" commands have special repetition
behavior: repeating the command doesn't re-run it with the same
arguments
This is currently implemented by modifying the passed-in argument; but
that won't work properly with const arguments (and seems pretty
obscure besides).
This patch adds a new "set_repeat_arguments" function and changes the
relevant places to call it.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* printcmd.c (x_command): Call set_repeat_arguments.
* cli/cli-cmds.c (list_command): Call set_repeat_arguments.
* top.c (repeat_arguments): New global.
(set_repeat_arguments): New function.
(execute_command): Handle repeat_arguments.
(show_commands): Calls set_repeat_arguments.
* command.h (set_repeat_arguments): Declare.
While we still have cleanups (i.e., make_cleanup & co), we must be
sure to add END_CATCH at the end of a TRY/CATCH/END_CATCH construct.
However, it's currently too easy to miss adding the END_CATCH, because
the code compiles anyway without it. I realized this when I noticed
that another patch I was working on missed several adding END_CATCH in
several new TRY/CATCH uses.
This commit fixes that by making TRY open a new scope that is only
closed by END_CATCH. This way, if you forget to add the END_CATCH,
then compilation fails due to the unbalanced curly braces.
This caught a couple places where we were missing END_CATCH in current
master, also fixed by the patch.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (complete_command): Add missing END_CATCH.
* common/common-exceptions.h (TRY): Open an outermost scope.
Expand intro comment.
(CATCH): Reindent.
(END_CATCH): Close the outermost scope.
* completer.c (complete_line_internal): Add missing END_CATCH.
This commit adds new "set/show cwd" commands, which are used to
set/show the current working directory of the inferior that will be
started.
The idea here is that "set cwd" will become the de facto way of
setting the inferior's cwd. Currently, the user can use "cd" for
that, but there are side effects: with "cd", GDB also switches to
another directory, and that can impact the loading of scripts and
other files. With "set cwd", we separate the logic into a new
command.
To maintain backward compatibility, if the user issues a "cd" command
but doesn't use "set cwd", then the inferior's cwd will still be
changed according to what the user specified. However, "set cwd" has
precedence over "cd", so it can always be used to override it.
"set cwd" works in the following way:
- If the user sets the inferior's cwd by using "set cwd", then this
directory is saved into current_inferior ()->cwd and is used when
the inferior is started (see below).
- If the user doesn't set the inferior's cwd by using "set cwd", but
rather use the "cd" command as before, then this directory is
inherited by the inferior because GDB will have chdir'd into it.
On Unix-like hosts, the way the directory is changed before the
inferior execution is by expanding the user set directory before the
fork, and then "chdir" after the call to fork/vfork on
"fork_inferior", but before the actual execution. On Windows, the
inferior cwd set by the user is passed directly to the CreateProcess
call, which takes care of the actual chdir for us.
This way, we'll make sure that GDB's cwd is not affected by the user
set cwd.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (New commands): Mention "set/show cwd".
* cli/cli-cmds.c (_initialize_cli_cmds): Mention "set cwd" on
"cd" command's help text.
* common/common-inferior.h (get_inferior_cwd): New prototype.
* infcmd.c (inferior_cwd_scratch): New global variable.
(set_inferior_cwd): New function.
(get_inferior_cwd): Likewise.
(set_cwd_command): Likewise.
(show_cwd_command): Likewise.
(_initialize_infcmd): Add "set/show cwd" commands.
* inferior.h (class inferior) <cwd>: New field.
* nat/fork-inferior.c: Include "gdb_tilde_expand.h".
(fork_inferior): Change inferior's cwd before its execution.
* windows-nat.c (windows_create_inferior): Pass inferior's cwd
to CreateProcess.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (current_inferior_cwd): New global variable.
(get_inferior_cwd): New function.
* inferiors.h (struct process_info) <cwd>: New field.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention new "set cwd" command.
(Working Directory) <Your Program's Working Directory>:
Rephrase to explain that "set cwd" exists and is the default
way to change the inferior's cwd.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.c: New file.
* gdb.base/set-cwd.exp: Likewise.
This adds two add_cmd overloads: one whose callback takes a const char *,
and one that doesn't accept a function at all. The no-function overload
was introduced to avoid ambiguity when NULL was passed as the function.
Long term the goal is for all commands to take const arguments, and
for the non-const variants to be removed entirely.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* cli/cli-decode.c (add_cmd, set_cmd_cfunc): New function
overloads.
(do_add_cmd): Rename from add_cmd. Don't call set_cmd_cfunc.
(do_const_cfunc): New function.
(cmd_cfunc_eq): New overload.
(cli_user_command_p): Check do_const_cfunc.
* cli/cli-decode.h (struct cmd_list_element) <function>: New field
const_cfunc.
* command.h (add_cmd): Add const overload and no-function
overload.
(set_cmd_cfunc): Add const overload.
(cmd_const_cfunc_ftype): Declare.
(cmd_cfunc_eq): Add const overload.
* breakpoint.c, cli-cmds.c, cli-dump.c, guile/scm-cmd.c,
python/py-cmd.c, target.c, tracepoint.c: Use no-function add_cmd
overload.
Currently we have "current_directory" and "gdb_dirbuf" globals, which
means that we basically have two possible places to consult when we
want to know GDB's current working directory.
This is not ideal and can lead to confusion. Moreover, the way we're
using "gdb_difbuf" along with "getcwd" is problematic because we
declare the buffer with "1024" elements hardcoded, which does not take
into account longer pathnames that are possible in many filesystems.
Using "PATH_MAX" would also not be a solution because of portability
problems. Therefore, the best solution is to rely on the fact that
"getcwd (NULL, 0)" will "do the right thing" and return a
heap-allocated string containing the full path. With the new "getcwd"
module from gnulib, it is now possible to do that without worrying
about breaking some host.
With this patch "current_directory" is now the only place to check for
GDB's cwd.
Reviewed-by: Pedro Alves <palves@redhat.com>
gdb/ChangeLog:
2017-09-22 Sergio Durigan Junior <sergiodj@redhat.com>
* cli/cli-cmds.c (pwd_command): Use "getcwd (NULL, 0)".
(cd_command): Likewise. Free "current_directory" before
assigning to it.
* main.c (captured_main_1): Use "getcwd (NULL, 0)".
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
* top.c (gdb_dirbuf): Remove global declaration.
* top.h (gdb_dirbuf): Likewise.
Currently, with an ambiguous "list first,last", we get:
(gdb) list bar,main
Specified first line 'bar' is ambiguous:
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98
This commit makes gdb's output above a bit clearer by printing the
symbol name as well:
(gdb) list bar,main
Specified first line 'bar' is ambiguous:
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97, symbol: "bar(A)"
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98, symbol: "bar(B)"
And while at it, makes gdb print the symbol name when actually listing
multiple locations too. I.e., before (with "set listsize 2"):
(gdb) list bar
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97
96
97 int bar (A) { return 11; }
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98
97 int bar (A) { return 11; }
98 int bar (B) { return 22; }
After:
(gdb) list bar
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97, symbol: "bar(A)"
96
97 int bar (A) { return 11; }
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98, symbol: "bar(B)"
97 int bar (A) { return 11; }
98 int bar (B) { return 22; }
Currently, the result of decoding a linespec loses information about
the original symbol that was found. All we end up with is an address.
This makes it difficult to find the original symbol again to get at
its print name. Fix that by storing a pointer to the symbol in the
sal. We already store the symtab and obj_section, so it feels like a
natural progression to me. This avoids having to do any extra symbol
lookup too.
gdb/ChangeLog:
2017-09-20 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (list_command): Use print_sal_location.
(print_sal_location): New function.
(ambiguous_line_spec): Use print_sal_location.
* linespec.c (symbol_to_sal): Record the symbol in the sal.
* symtab.c (find_function_start_sal): Likewise.
* symtab.h (symtab_and_line::symbol): New field.
gdb/testsuite/ChangeLog:
2017-09-20 Pedro Alves <palves@redhat.com>
* gdb.base/list-ambiguous.exp (test_list_ambiguous_symbol): Expect
symbol names in gdb's output.
* gdb.cp/overload.exp ("list all overloads"): Likewise.
This renames a few functions -- skip_spaces_const,
skip_to_space_const, get_number_const, extract_arg_const -- to drop
the "_const" suffix and instead rely on overloading.
This makes future const fixes simpler by reducing the number of lines
that must be changed. I think it is also not any less clear, as all
these functions have the same interface as their non-const versions by
design. Furthermore there's an example of using an overload in-tree
already, namely check_for_argument.
This patch was largely created using some perl one-liners; then a few
fixes were applied by hand.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* common/common-utils.h (skip_to_space): Remove macro, redeclare
as function.
(skip_to_space): Rename from skip_to_space_const.
* common/common-utils.c (skip_to_space): New function.
(skip_to_space): Rename from skip_to_space_const.
* cli/cli-utils.h (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
* cli/cli-utils.c (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
(number_or_range_parser::get_number): Use ::get_number.
* aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c,
break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c,
cli/cli-script.c, cli/cli-setshow.c, compile/compile.c,
completer.c, demangle.c, disasm.c, findcmd.c, linespec.c,
linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c,
minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c,
python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c,
stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.
For some reason I ended up staring at some of the "int flags" in
btrace-related code, and I got confused because I had no clue what the
flags where supposed to indicate.
Fix that by using enum_flags, so that:
#1 - it's clear from the type what the flags are about, and
#2 - the compiler can catch mismatching mistakes
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (print_disassembly, disassemble_current_function)
(disassemble_command): Use gdb_disassembly_flags instead of bare
int.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn)
(dump_insns, do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly, do_assembly_only, gdb_disassembly):
Use gdb_disassembly_flags instead of bare int.
* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED, DISASSEMBLY_RAW_INSN)
(DISASSEMBLY_OMIT_FNAME, DISASSEMBLY_FILENAME)
(DISASSEMBLY_OMIT_PC, DISASSEMBLY_SOURCE)
(DISASSEMBLY_SPECULATIVE): No longer macros. Instead they're...
(enum gdb_disassembly_flag): ... values of this new enumeration.
(gdb_disassembly_flags): Define.
(gdb_disassembly)
(gdb_pretty_print_disassembler::pretty_print_insn): Use it.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Use
gdb_disassembly_flags instead of bare int.
* record-btrace.c (btrace_insn_history)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from): Use gdb_disassembly_flags
instead of bare int.
* record.c (get_insn_history_modifiers, cmd_record_insn_history):
Use gdb_disassembly_flags instead of bare int.
* target-debug.h (target_debug_print_gdb_disassembly_flags):
Define.
* target-delegates.c: Regenerate.
* target.c (target_insn_history, target_insn_history_from)
(target_insn_history_range): Use gdb_disassembly_flags instead of
bare int.
* target.h: Include "disasm.h".
(struct target_ops) <to_insn_history, to_insn_history_from,
to_insn_history_range>: Use gdb_disassembly_flags instead of bare
int.
(target_insn_history, target_insn_history_from)
(target_insn_history_range): Use gdb_disassembly_flags instead of
bare int.
Instead, make symtab_and_line initialize its members itself. Many
symtab_and_line declarations are moved to where the object is
initialized at the same time both for clarity and to avoid double
initialization. A few functions, like e.g., find_frame_sal are
adjusted to return the sal using normal function return instead of an
output parameter likewise to avoid having to default-construct a sal
and then immediately have the object overwritten.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ada-lang.c (is_known_support_routine): Move sal declaration to
where it is initialized.
* breakpoint.c (create_internal_breakpoint, init_catchpoint)
(parse_breakpoint_sals, decode_static_tracepoint_spec)
(clear_command, update_static_tracepoint): Remove init_sal
references. Move declarations closer to initializations.
* cli/cli-cmds.c (list_command): Move sal declarations closer to
initializations.
* elfread.c (elf_gnu_ifunc_resolver_stop): Remove init_sal
references. Move sal declarations closer to initializations.
* frame.c (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter. Remove init_sal references.
* frame.h (find_frame_sal): Return a symtab_and_line via function
return instead of output parameter.
* guile/scm-frame.c (gdbscm_frame_sal): Adjust.
* guile/scm-symtab.c (stscm_make_sal_smob): Use in-place new
instead of memset.
(gdbscm_find_pc_line): Remove init_sal reference.
* infcall.c (call_function_by_hand_dummy): Remove init_sal
references. Move declarations closer to initializations.
* infcmd.c (set_step_frame): Update. Move declarations closer to
initializations.
(finish_backward): Remove init_sal references. Move declarations
closer to initializations.
* infrun.c (process_event_stop_test, handle_step_into_function)
(insert_hp_step_resume_breakpoint_at_frame)
(insert_step_resume_breakpoint_at_caller): Likewise.
* linespec.c (create_sals_line_offset, decode_digits_ordinary)
(symbol_to_sal): Likewise.
* probe.c (parse_probes_in_pspace): Remove init_sal reference.
* python/py-frame.c (frapy_find_sal): Move sal declaration closer
to its initialization.
* reverse.c (save_bookmark_command): Use new/delete. Remove
init_sal references. Move declarations closer to initializations.
* source.c (get_current_source_symtab_and_line): Remove brace
initialization.
(set_current_source_symtab_and_line): Now takes the sal by const
reference. Remove brace initialization.
(line_info): Remove init_sal reference.
* source.h (set_current_source_symtab_and_line): Now takes a
symtab_and_line via const reference.
* stack.c (set_current_sal_from_frame): Adjust.
(print_frame_info): Adjust.
(get_last_displayed_sal): Return the sal via function return
instead of via output parameter. Simplify.
(frame_info): Adjust.
* stack.h (get_last_displayed_sal): Return the sal via function
return instead of via output parameter.
* symtab.c (init_sal): Delete.
(find_pc_sect_line): Remove init_sal references. Move
declarations closer to initializations.
(find_function_start_sal): Remove init_sal references. Move
declarations closer to initializations.
* symtab.h (struct symtab_and_line): In-class initialize all
fields.
* tracepoint.c (set_traceframe_context)
(print_one_static_tracepoint_marker): Remove init_sal references.
Move declarations closer to initializations.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Adjust.
* tui/tui-stack.c (tui_show_frame_info): Adjust. Move
declarations closer to initializations.
* tui/tui-winsource.c (tui_update_source_window_as_is): Remove
init_sal references. Adjust.
This replaces "struct symtabs_and_lines" with
std::vector<symtab_and_line> in most cases. This removes a number of
cleanups.
In some cases, the sals objects do not own the sals they point at.
Instead they point at some sal that lives on the stack. Typically
something like this:
struct symtab_and_line sal;
struct symtabs_and_lines sals;
// fill in sal
sals.nelts = 1;
sals.sals = &sal;
// use sals
Instead of switching those cases to std::vector too, such usages are
replaced by gdb::array_view<symtab_and_line> instead. This avoids
introducing heap allocations.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Use range-for.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* breakpoint.c: Include "common/array-view.h".
(init_breakpoint_sal, create_breakpoint_sal): Change sals
parameter from struct symtabs_and_lines to
array_view<symtab_and_line>. Adjust. Use range-for. Update.
(breakpoint_sals_to_pc): Change sals parameter from struct
symtabs_and_lines to std::vector reference.
(check_fast_tracepoint_sals): Change sals parameter from struct
symtabs_and_lines to std::array_view. Use range-for.
(decode_static_tracepoint_spec): Return a std::vector instead of
symtabs_and_lines. Update.
(create_breakpoint): Update.
(break_range_command, until_break_command, clear_command): Update.
(base_breakpoint_decode_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location)
(bkpt_probe_decode_location, tracepoint_decode_location)
(tracepoint_probe_decode_location)
(strace_marker_create_sals_from_location): Return a std::vector
instead of symtabs_and_lines.
(strace_marker_create_breakpoints_sal): Update.
(strace_marker_decode_location): Return a std::vector instead of
symtabs_and_lines. Update.
(update_breakpoint_locations): Change struct symtabs_and_lines
parameters to gdb::array_view. Adjust.
(location_to_sals): Return a std::vector instead of
symtabs_and_lines. Update.
(breakpoint_re_set_default): Use std::vector instead of struct
symtabs_and_lines.
(decode_location_default): Return a std::vector instead of
symtabs_and_lines. Update.
* breakpoint.h: Include "common/array-view.h".
(struct breakpoint_ops) <decode_location>: Now returns a
std::vector instead of returning a symtabs_and_lines via output
parameter.
(update_breakpoint_locations): Change sals parameters to use
gdb::array_view.
* cli/cli-cmds.c (edit_command, list_command): Update to use
std::vector and gdb::array_view.
(ambiguous_line_spec): Adjust to use gdb::array_view and
range-for.
(compare_symtabs): Rename to ...
(cmp_symtabs): ... this. Change parameters to symtab_and_line
const reference and adjust.
(filter_sals): Rewrite using std::vector and standard algorithms.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify.
(jump_command): Update to use std::vector.
* linespec.c (struct linespec_state) <canonical_names>: Update
comment.
(add_sal_to_sals_basic): Delete.
(add_sal_to_sals, filter_results, convert_results_to_lsals)
(decode_line_2, create_sals_line_offset)
(convert_address_location_to_sals, convert_linespec_to_sals)
(convert_explicit_location_to_sals, parse_linespec)
(event_location_to_sals, decode_line_full, decode_line_1)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc)
(decode_digits_list_mode, decode_digits_ordinary, minsym_found)
(linespec_result::~linespec_result): Adjust to use std::vector
instead of symtabs_and_lines.
* linespec.h (linespec_sals::sals): Now a std::vector.
(struct linespec_result): Use std::vector, bool, and in-class
initialization.
(decode_line_1, decode_line_with_current_source)
(decode_line_with_last_displayed): Return std::vector.
* macrocmd.c (info_macros_command): Use std::vector.
* mi/mi-main.c (mi_cmd_trace_find): Use std::vector.
* probe.c (parse_probes_in_pspace, parse_probes): Adjust to use
std::vector.
* probe.h (parse_probes): Return a std::vector.
* python/python.c (gdbpy_decode_line): Use std::vector and
gdb::array_view.
* source.c (select_source_symtab, line_info): Use std::vector.
* stack.c (func_command): Use std::vector.
* symtab.h (struct symtabs_and_lines): Delete.
* tracepoint.c (tfind_line_command, scope_info): Use std::vector.
Currently, with "list LINESPEC1,LINESPEC2", if one of the linespecs is
ambiguous, i.e., if it expands to multiple locations, you get this
seemingly odd output:
(gdb) list foo,bar
file: "file0.c", line number: 26
file: "file1.c", line number: 29
Since "foo" above expands to multiple locations, the specified range
is indeterminate, and GDB is trying to be helpful by showing you what
was ambiguous. It looks confusing to me, though. I think it'd be
much more user friendly if GDB actually told you that, like this:
(gdb) list foo,bar
Specified first line 'foo' is ambiguous:
file: "file0.c", line number: 26
file: "file1.c", line number: 29
(gdb) list bar,foo
Specified last line 'foo' is ambiguous:
file: "file0.c", line number: 26
file: "file1.c", line number: 29
Note, I'm using "first" and "last" in the output because that's what
the manual uses:
~~~
list first,last
Print lines from first to last. [...]
~~~
Tested on x86-64 GNU/Linux.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (edit_command): Pass message to
ambiguous_line_spec.
(list_command): Pass message to ambiguous_line_spec. Say
"first"/"last" instead of "start" and "end" to be consistent with
the manual.
(ambiguous_line_spec): Add 'format' and vararg parameters. Use
them to print formatted message.
gdb/testsuite/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* gdb.base/list-ambiguous.exp: New file.
* gdb.base/list-ambiguous0.c: New file.
* gdb.base/list-ambiguous1.c: New file.
* gdb.base/list.exp (test_list_range): Adjust expected output.
Change cd_command to use unique_xmalloc_ptr, removing a cleanup.
ChangeLog
2017-09-03 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (cd_command): Use gdb::unique_xmalloc_ptr.
With the following C++ code:
int bar() { return 0;}
int bar(int) { return 0; }
GDB behaves as:
(gdb) list bar
file: "overload.cc", line number: 1
file: "overload.cc", line number: 2
It would be better for GDB to list the actual code around those two
locations, not just print the location. Like:
(gdb) list bar
file: "overload.cc", line number: 1
1 int bar() { return 0;}
2 int bar(int) { return 0; }
file: "overload.cc", line number: 2
1 int bar() { return 0;}
2 int bar(int) { return 0; }
That's what this this commit implements.
Tested on x86-64 GNU/Linux.
gdb/ChangeLog:
2017-08-22 Zhouyi Zhou <zhouzhouyi@gmail.com>
* cli-cmds.c (list_commands): List actual code around more than
one location.
The heap-allocated 'old_source_verbose' local was accidentally left
behind by commit 2ec845e758 ("More uses of scoped_restore").
Valgrind caught it, like:
==20123== 8 bytes in 1 blocks are definitely lost in loss record 4,609 of 13,785
==20123== at 0x4C2A988: calloc (vg_replace_malloc.c:711)
==20123== by 0x60A2F8: xcalloc (common-utils.c:84)
==20123== by 0x4CDBE5: build_command_line(command_control_type, char const*) (cli-script.c:159)
==20123== by 0x4CDC32: get_command_line(command_control_type, char const*) (cli-script.c:172)
==20123== by 0x5230F1: python_command(char*, int) (python.c:421)
==20123== by 0x4C61AD: do_cfunc(cmd_list_element*, char*, int) (cli-decode.c:106)
==20123== by 0x4C911F: cmd_func(cmd_list_element*, char*, int) (cli-decode.c:1902)
==20123== by 0x7CA79E: execute_command(char*, int) (top.c:650)
==20123== by 0x695A0C: command_handler(char*) (event-top.c:590)
==20123== by 0x7CA33F: read_command_file(_IO_FILE*) (top.c:461)
==20123== by 0x4D0C3A: script_from_file(_IO_FILE*, char const*) (cli-script.c:1584)
==20123== by 0x4C2727: source_script_from_stream(_IO_FILE*, char const*, char const*) (cli-cmds.c:589)
gdb/ChangeLog:
2017-08-17 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (source_command): Delete 'old_source_verbose'
local.
This patch changes most sites calling tilde_expand to use
gdb::unique_xmalloc_ptr, rather than a cleanup. It also changes
scan_expression_with_cleanup to return a unique pointer, because the
patch was already touching code in that area.
Regression tested on the buildbot.
ChangeLog
2017-08-05 Tom Tromey <tom@tromey.com>
* compile/compile-object-load.c (compile_object_load): Use
gdb::unique_xmalloc_ptr.
* cli/cli-dump.c (scan_filename): Rename from
scan_filename_with_cleanup. Change return type.
(scan_expression): Rename from scan_expression_with_cleanup.
Change return type.
(dump_memory_to_file, dump_value_to_file, restore_command):
Use gdb::unique_xmalloc_ptr. Update.
* cli/cli-cmds.c (find_and_open_script): Use
gdb::unique_xmalloc_ptr.
* tracefile-tfile.c (tfile_open): Use gdb::unique_xmalloc_ptr.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols): Use gdb::unique_xmalloc_ptr.
* symfile.c (symfile_bfd_open, generic_load)
(add_symbol_file_command, remove_symbol_file_command): Use
gdb::unique_xmalloc_ptr.
* source.c (openp): Use gdb::unique_xmalloc_ptr.
* psymtab.c (maintenance_print_psymbols): Use
gdb::unique_xmalloc_ptr.
* corelow.c (core_open): Use gdb::unique_xmalloc_ptr.
* breakpoint.c (save_breakpoints): Use gdb::unique_xmalloc_ptr.
* solib.c (solib_map_sections): Use gdb::unique_xmalloc_ptr.
(reload_shared_libraries_1): Likewise.
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
There were a few more places in gdb that could easily use
scoped_restore, replacing some cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* reverse.c (exec_direction_default): Remove.
(exec_reverse_once): Use scoped_restore.
* remote.c (restore_remote_timeout): Remove.
(remote_flash_erase, remote_flash_write, remote_flash_done)
(readchar, remote_serial_write): Use scoped_restore.
* cli/cli-script.c (struct source_cleanup_lines_args)
(source_cleanup_lines): Remove.
(script_from_file): Use scoped_restore.
* cli/cli-cmds.c (source_verbose_cleanup): Remove.
(source_command): Use scoped_restore.
This changes find_and_open_script to return a
gdb::optional<open_script>, where open_script is a new type
encapsulating the two return values. The new type helps avoid
cleanups in the callers.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (find_and_open_script): Change return type.
Remove "streamp" and "full_path" parameters.
(source_script_with_search): Update.
* auto-load.c (source_script_file): Update.
* cli/cli-cmds.h (find_and_open_script): Change type.
(open_script): New struct.
Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions. These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).
This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.
gdb/testsuite:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".
gdb/doc:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".
Philippe Waroquiers