I have patches that:
1 - make the CLI print stop info from a normal_stop observer, like MI
does.
2 - happen to change the order in which the Python and CLI/TUI
normal_stop observers are installed.
With those in place, py-events.exp regresses like shown below [1],
because the Python stop events are output before CLI prints stop info,
instead of after, and the test doesn't expect that.
With the same Python hooks, the order in which MI and Python events is
emited today is already undefined, because MI also uses the
normal_stop observer for output. I see no reason that we should in
general define the order observers, interpreters and scripting
languages get their turn at being notified of these events. So this
patch makes the test cope with Python->CLI output order too.
Tested on x86_64 Fedora 20.
gdb/testsuite/
2015-07-24 Pedro Alves <palves@redhat.com>
* gdb.python/py-events.exp: Accept output between the stop event
and the prompt.
* gdb.python/py-evsignal.exp: Likewise.
* gdb.python/py-evthreads.exp: Likewise.
[1] - The regressions in question look like:
Before said patches:
(gdb) continue
Continuing.
event type: continue
Breakpoint 2, first () at /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.python/py-events.c:30
30 for (i = 0; i < 2; i++)
event type: stop
event type: stop
stop reason: breakpoint
first breakpoint number: 2
breakpoint number: 2
breakpoint number: 3
all threads stopped
(gdb) PASS: gdb.python/py-events.exp: continue
After said patches:
(gdb) continue
Continuing.
event type: continue
event type: stop
event type: stop
stop reason: breakpoint
first breakpoint number: 2
breakpoint number: 2
breakpoint number: 3
all threads stopped
Breakpoint 2, first () at /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.python/py-events.c:30
30 for (i = 0; i < 2; i++)
(gdb) FAIL: gdb.python/py-events.exp: continue
This finally makes background execution commands possible by default.
However, in order to do that, there's one last thing we need to do --
we need to separate the MI and target notions of "async". Unlike the
CLI, where the user explicitly requests foreground vs background
execution in the execution command itself (c vs c&), MI chose to treat
"set target-async" specially -- setting it changes the default
behavior of execution commands.
So, we can't simply "set target-async" default to on, as that would
affect MI frontends. Instead we have to make the setting MI-specific,
and teach MI about sync commands on top of an async target.
Because the "target" word in "set target-async" ends up as a potential
source of confusion, the patch adds a "set mi-async" option, and makes
"set target-async" a deprecated alias.
Rather than make the targets always async, this patch introduces a new
"maint set target-async" option so that the GDB developer can control
whether the target is async. This makes it simpler to debug issues
arising only in the synchronous mode; important because sync mode
seems unlikely to go away.
Unlike in previous revisions, "set target-async" does not affect this
new maint parameter. The rationale for this is that then one can
easily run the test suite in the "maint set target-async off" mode and
have tests that enable mi-async fail just like they fail on
non-async-capable targets. This emulation is exactly the point of the
maint option.
I had asked Tom in a previous iteration to split the actual change of
the target async default to a separate patch, but it turns out that
that is quite awkward in this version of the patch, because with MI
async and target async decoupled (unlike in previous versions), if we
don't flip the default at the same time, then just "set target-async
on" alone never actually manages to do anything. It's best to not
have that transitory state in the tree.
Given "set target-async on" now only has effect for MI, the patch goes
through the testsuite removing it from non-MI tests. MI tests are
adjusted to use the new and less confusing "mi-async" spelling.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Mention "maint set target-async", "set mi-async", and that
background execution commands are now always available.
* target.h (target_async_permitted): Update comment.
* target.c (target_async_permitted, target_async_permitted_1):
Default to 1.
(set_target_async_command): Rename to ...
(maint_set_target_async_command): ... this.
(show_target_async_command): Rename to ...
(maint_show_target_async_command): ... this.
(_initialize_target): Adjust.
* infcmd.c (prepare_execution_command): Make extern.
* inferior.h (prepare_execution_command): Declare.
* infrun.c (set_observer_mode): Leave target async alone.
* mi/mi-interp.c (mi_interpreter_init): Install
mi_on_sync_execution_done as sync_execution_done observer.
(mi_on_sync_execution_done): New function.
(mi_execute_command_input_handler): Don't print the prompt if we
just started a synchronous command with an async target.
(mi_on_resume): Check sync_execution before printing prompt.
* mi/mi-main.h (mi_async_p): Declare.
* mi/mi-main.c: Include gdbcmd.h.
(mi_async_p): New function.
(mi_async, mi_async_1): New globals.
(set_mi_async_command, show_mi_async_command, mi_async): New
functions.
(exec_continue): Call prepare_execution_command.
(run_one_inferior, mi_cmd_exec_run, mi_cmd_list_target_features)
(mi_execute_async_cli_command): Use mi_async_p.
(_initialize_mi_main): Install "set mi-async". Make
"target-async" a deprecated alias.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Non-Stop Mode): Remove "set target-async 1"
from example.
(Asynchronous and non-stop modes): Document '-gdb-set mi-async'.
Mention that target-async is now deprecated.
(Maintenance Commands): Document maint set/show target-async.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.base/async-shell.exp: Don't enable target-async.
* gdb.base/async.exp
* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
parameter. Adjust.
(top level): Don't test with "target-async".
* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
* gdb.base/inferior-died.exp: Don't enable target-async.
* gdb.base/interrupt-noterm.exp: Likewise.
* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
* gdb.mi/mi-nonstop-exit.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-watch-nonstop.exp: Likewise.
* gdb.multi/watchpoint-multi.exp: Adjust comment.
* gdb.python/py-evsignal.exp: Don't enable target-async.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.reverse/break-precsave.exp: Don't test with "target-async".
* gdb.server/solib-list.exp: Don't enable target-async.
* gdb.threads/thread-specific-bp.exp: Likewise.
* lib/mi-support.exp: Adjust to use mi-async.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* gdb.base/charset.exp: Change print syntax for Python 3
compatibility.
* gdb.python/py-block.exp: Ditto.
* gdb.python/py-breakpoint.exp: Ditto.
* gdb.python/py-cmd.exp: Ditto.
* gdb.python/py-events.py: Ditto.
* gdb.python/py-finish-breakpoint.py: Ditto.
* gdb.python/py-finish-breakpoint2.exp: Ditto.
* gdb.python/py-finish-breakpoint2.py: Ditto.
* gdb.python/py-frame-inline.exp: Ditto.
* gdb.python/py-frame.exp: Ditto.
* gdb.python/py-infthread.exp: Ditto.
* gdb.python/py-objfile.exp: Ditto.
* gdb.python/py-parameter.exp: Ditto.
* gdb.python/py-progspace.exp: Ditto.
* gdb.python/py-prompt.exp: Ditto.
* gdb.python/py-symbol.exp: Ditto.
* gdb.python/py-symtab.exp: Ditto.
* gdb.python/py-template.exp: Ditto.
* gdb.python/py-value-cc.exp: Ditto.
* gdb.python/python.exp: Ditto.
* gdb.python/source2.py: Ditto.
* gdb.python/lib-types.exp: Change print syntax for Python 3
compatibility.
Use sorted() function rather than sort() method.
Accept either int or long values for enum values.
* gdb.python/py-events.exp: Use exec(open(...).read()) instead of
execfile for Python 3 compatibility.
* gdb.python/py-evsignal.exp: Ditto.
* gdb.python/py-evthreads.exp: Ditto.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/py-pp-maint.exp: Ditto.
* gdb.python/py-prettyprint.exp: Ditto.
* gdb.python/py-finish-breakpoint.exp: Change print syntax for
Python 3 compatibility.
Skip tests for Python 2.4.
* gdb.python/py-inferior.exp: Change print syntax for
Python 3 compatibility.
Use byte string rather than character string in memory write test
if Python 3.
* gdb.python/py-pp-maint.py: Change class declarations to "new
class" syntax.
* gdb.python/py-prettyprint.py: Change iterator class to generator
function for Python 3 compatibility.
Make all classes "new style".
Fix indentation issue and stray semicolon.
* gdb.python/py-shared.expChange print syntax for Python 3
compatibility.
Define "long" if Python 3.
* gdb.python/py-type.exp: Change print syntax for Python 3
compatibility.
Accept either int or long values for enum values.
* gdb.python/py-value.exp: Change print syntax for Python 3
compatibility.
Skip "long" and "unicode" tests if Python 3.
Accept either "type" or "class" in type checks.
* lib/gdb.exp (gdb_py_is_py3k): New flag set if Python 3.
(gdb_py_is_py24): New flag set if Python 2.4 or 2.5.
prepare_for_testing.
* gdb.python/py-block.exp: Use standard_testfile.
* gdb.python/py-breakpoint.exp: Use standard_testfile.
* gdb.python/py-events.exp: Use standard_testfile,
standard_output_file.
* gdb.python/py-evsignal.exp: Use standard_testfile.
* gdb.python/py-evethreads.exp: Use standard_testfile.
* gdb.python/py-explore-cc.exp: Use standard_testfile.
* gdb.python/py-explore.exp: Use standard_testfile.
* gdb.python/py-finish-breakpoint.exp: Use standard_testfile,
standard_output_file.
* gdb.python/py-finish-breakpoint2.exp: Use standard_testfile,
prepare_for_testing.
* gdb.python/py-frame-inline.exp: Use standard_testfile.
* gdb.python/py-frame.exp: Use standard_testfile.
* gdb.python/py-inferior.exp: Use standard_testfile.
* gdb.python/py-infthread.exp: Use standard_testfile.
* gdb.python/py-mi.exp: Use standard_testfile.
* gdb.python/py-objfile-script.exp: Use standard_testfile,
build_executable.
* gdb.python/py-objfile.exp: Use standard_testfile.
* gdb.python/py-pp-maint.exp: Use standard_testfile,
prepare_for_testing.
* gdb.python/py-prettyprint.exp: Use standard_testfile.
* gdb.python/py-progspace.exp: Use standard_testfile,
build_executable.
* gdb.python/py-prompt.exp: Use standard_testfile,
build_executable.
* gdb.python/py-section-script.exp: Use standard_testfile,
build_executable.
* gdb.python/py-shared.exp: Use standard_testfile,
standard_output_file, clean_restart.
* gdb.python/py-symbol.exp: Use standard_output_file,
prepare_for_testing.
* gdb.python/py-symtab.exp: Use standard_output_file,
prepare_for_testing
* gdb.python/py-template.exp: Use standard_testfile.
* gdb.python/py-type.exp: Use standard_testfile.
* gdb.python/py-value-cc.exp: Use standard_testfile.
* gdb.python/py-value.exp: Use standard_testfile.
* gdb.python/python.exp: Use standard_testfile, build_executable.
* gdb.python/py-events.exp: Remove pretty printing comment.
* gdb.python/py-evsignal.exp: New file.
* gdb.python/py-evthreads.c: Include signal.h.
(thread3): Remove variable count3. Remove variable bad and use raise
instead.
(thread2): Remove variable count2. Move thread3 pthread_create here,
merge pthread_join to a single line.
(main): Remove variable count1. Merge pthread_join with pthread_create
to a single line.
* gdb.python/py-evthreads.exp: Remove pretty printing comment. New
KFAIL python/12966 for gdbserver. Test return value of
gdb_compile_pthreads. Use gdb_run_cmd. Replace send_gdb and
gdb_expect by gdb_test and gdb_test_multiple.
(thread 2, thread 3): New tests.
