Some tests are skipped on aarch64 unexpectedly because arg0exp isn't
set. This patch is to set arg0exp to "$x0" for aarch64.
gdb/testsuite:
2015-12-15 Yao Qi <yao.qi@linaro.org>
* gdb.trace/ftrace.exp: Set arg0exp to "$x0" if target
is aarch64*-*-*.
This patch updates tests for fork and exec events in target remote mode.
In the majority of cases this was a simple matter of removing some code
that disabled the test for target remote. In a few cases the test needed
to be disabled; in those cases the gdb_protocol was checked instead of
using the [is_remote target] etc.
In a couple of cases we needed to use clean_restart, since target remote
doesn't support the run command, and in one case we had to modify an expect
expression to allow for a "multiprocess-style" ptid.
Tested with the patch that implemented target remote mode fork and exec
event support.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp (main): Enable for target
remote.
* gdb.base/foll-exec-mode.exp (main): Disable for target remote.
* gdb.base/foll-exec.exp (main): Enable for target remote.
* gdb.base/foll-fork.exp (main): Likewise.
* gdb.base/foll-vfork.exp (main): Likewise.
* gdb.base/multi-forks.exp (main): Likewise, and use clean_restart.
(proc continue_to_exit_bp_loc): Use clean_restart.
* gdb.base/pie-execl.exp (main): Disable for target remote.
* gdb.base/watch-vfork.exp (main): Enable for target remote.
* gdb.mi/mi-nsthrexec.exp (main): Likewise.
* gdb.threads/execl.exp (main): Likewise.
* gdb.threads/fork-child-threads.exp (main): Likewise.
* gdb.threads/fork-plus-threads.exp (main): Disable for target
remote.
* gdb.threads/fork-thread-pending.exp (main): Enable for target
remote.
* gdb.threads/linux-dp.exp (check_philosopher_stack): Allow
pid.tid style ptids, instead of just tid.
* gdb.threads/thread-execl.exp (main): Enable for target remote.
* gdb.threads/watchpoint-fork.exp (main): Likewise.
* gdb.trace/report.exp (use_collected_data): Allow pid.tid style
ptids, instead of just tid.
When a a user uses 'list +' to list forward through a source file they
eventually reach the end of the source file. Subsequent uses of 'list
+' result in an error message like this, that let the user know they are
at the end of the source file:
Line number XXX out of range; FILENAME has YYY lines.
Compare this to the current behaviour of 'list -' which lists backwards
through a source file. When the user reaches the beginning of the
source file, subsequent uses of 'list -' result in the command silently
returning. This can be confusing if the previous uses of 'list -' have
scrolled off the users display, the user receives no reminder that the
have already seen the start of the file.
After this commit a use of 'list -' when the user has already seen the
start of a file will receive the following error:
Already at the start of FILENAME.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Add an error when trying to use
'-' to scan read off the start of the source file.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_forward): Add end of file error
test.
(test_repeat_list_command): Add end of file error test.
(test_list_backwards): Add beginning of file error test.
There is an inconsistency with the handling of the special +/- arguments
to the list command.
For the very first time that list is used (after the inferior has
changed locations) then only the first character of the argument string
is checked, so 'list +BLAH' will operate as 'list +' and 'list -----FOO'
will operate as 'list -'. This compares to each subsequent use of list,
where the whole argument string is checked, so 'list +BLAH' will try to
list lines of code around the function '+BLAH'.
This commit unifies the behaviour so that the whole argument string is
checked, in order to list the next 10, or previous 10 lines from a file
only 'list +' and 'list -' are now valid.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Check that the argument string is
a single character, either '+' or '-'.
gdb/testsuite/ChangeLog:
* gdb.base/list.exp (test_list_invalid_args): New function,
defined, and called.
I happen to find that coremaker2.c isn't used in the testsuite (if I
don't miss anything). I don't believe it until I see this ChangeLog
entry,
1999-11-18 Fred Fish <fnf@cygnus.com>
* gdb.base/coremaker2.c: Add sample program for generating
cores that is more self contained than coremaker.c. Eventually
I'll add more code to this and tie it into the testsuite.
looks Fred didn't "tie it into testsuite" later.
gdb/testsuite:
2015-12-11 Yao Qi <yao.qi@linaro.org>
* gdb.base/coremaker2.c: Remove.
I think these references to "spaces" came from the original multi-exec
submission that exposed "symbol spaces" to the user and had a
different UI, and then survived a global find/replace.
gdb/testsuite/ChangeLog:
2015-12-10 Pedro Alves <palves@redhat.com>
* gdb.multi/base.exp: Remove stale "spaces" references.
Several of the gdb.multi tests use the "nowarnings" option to suppress
warnings. The warnings in question all come from missing headers,
like e.g.:
src/gdb/testsuite/gdb.multi/multi-arch-exec.c:28:3: warning: incompatible implicit declaration of built-in function 'exit' [enabled by default]
exit (1);
^
There's no point in trying to avoid to include standard headers. In
gdb.base/hangout.c's case, it's even dangerous, as that file calls
printf. In order to compile a call to a variatic function correctly,
a declaration must be visible.
gdb/testsuite/ChangeLog:
2015-12-10 Pedro Alves <palves@redhat.com>
* gdb.multi/base.exp: Don't use nowarnings.
* gdb.multi/bkpt-multi-exec.exp: Don't use nowarnings.
* gdb.multi/hangout.c: Include stdio.h.
* gdb.multi/hello.c: Include stdlib.h.
* gdb.multi/multi-arch-exec.c: Include stdlib.h.
* gdb.multi/multi-arch-exec.exp: Don't use nowarnings.
* gdb.multi/multi-arch.exp: Don't use nowarnings.
It is possible to use multiple base addresses within a single address
range series, within the .debug_ranges section. The following is a
simplified example for 32-bit addresses:
.section ".debug_ranges"
.4byte 0xffffffff
.4byte BASE_1
.4byte START_OFFSET_1
.4byte END_OFFSET_1
.4byte START_OFFSET_2
.4byte END_OFFSET_2
.4byte 0xffffffff
.4byte BASE_2
.4byte START_OFFSET_3
.4byte END_OFFSET_3
.4byte 0
.4byte 0
In this example START/END 1 and 2 are relative to BASE_1, while
START/END 3 are relative to BASE_2.
Currently gdb does not correctly parse this DWARF, resulting in
corrupted address range information. This commit fixes this issue, and
adds a new test to cover this case.
In order to support testing of this feature extensions were made to the
testsuite dwarf assembler, additional functionality was added to the
.debug_line generation function, and a new function for generating the
.debug_ranges section was added.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_ranges_read): Unify and fix base address
reading code.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-ranges-base.c: New file.
* gdb.dwarf2/dw2-ranges-base.exp: New file.
* lib/dwarf.exp (namespace eval Dwarf): Add new variables to
support additional line table, and debug ranges generation.
(Dwarf::ranges): New function, generate .debug_ranges.
(Dwarf::lines): Support generating simple line table programs.
(Dwarf::assemble): Initialise new namespace variables.
This change eliminates some failures on simulator targets and makes
the test run a bit quicker too - without this change, we have to wait
for timeouts.
gdb/testsuite/ChangeLog:
* gdb.base/async.exp (proc test_background): Add case
for asynchronous execution not supported.
This set of patches add support for the zero-padded hexadecimal format for
varobj's, defined as "zero-hexadecimal". We currently only support regular
non-zero-padded hexadecimal.
Talking with IDE developers, they would like to have this option that is
already available to GDB's print/x commands, in the CLI, as 'z'.
gdb/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb/mi/mi-cmd-var.c (mi_parse_format): Handle new "zero-hexadecimal"
format.
* gdb/varobj.c (varobj_format_string): Add "zero-hexadecimal" entry.
(format_code): Add 'z' entry.
(varobj_set_display_format): Handle FORMAT_ZHEXADECIMAL.
* gdb/varobj.h (varobj_display_formats) <FORMAT_ZHEXADECIMAL>: New enum
field.
* NEWS: Add new note to MI changes citing the new zero-hexadecimal
format for -var-set-format.
gdb/doc/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (GDB/MI Variable Objects): Update text to mention
-var-set-format's new zero-hexadecimal format.
gdb/testsuite/ChangeLog:
2015-12-09 Luis Machado <lgustavo@codesourcery.com>
* gdb.mi/mi-var-display.exp: Add new checks for the zero-hexadecimal
format and change test names to make them unique.
When `info float` is used on an AMD64 system, GDB prints
floating-point values of x87 registers with raw contents like
0x361a867a8e0527397ce0 or 0xc4f988454a1ddd3cfdab wrongly.
This happens due to truncation to double, after which the former
becomes 0.0, and the latter becomes negative infinity. This is caused
by failed detection of x86-64 host, which results in setting
gdb_host_{float,double,long_double}_format to zeros.
This commit fixes this misdetection, and adds a test to make sure
future commits don't introduce a regression here.
gdb/ChangeLog:
2015-12-09 Ruslan Kabatsayev <b7.10110111@gmail.com>
PR gdb/18702
* configure.host: Fix detection of x86_64 host when setting
floatformats.
gdb/testsuite/ChangeLog:
2015-12-09 Ruslan Kabatsayev <b7.10110111@gmail.com>
Pedro Alves <pedro@redhat.com>
PR gdb/18702
Add checking of floatformats setup on x86_64 hosts.
* gdb.arch/i386-float.S (main): Load bigval and smallval.
(smallval, bigval): New labels/constants.
* gdb.arch/i386-float.exp: Use with_test_prefix and test "info
float" after loading bigval and smallval.
So far, trying to evaluate an expression involving a function call for
which GDB could find multiple function candidates outputs a menu so that
the user can select the one to run. For instance, with the two
following functions:
type New_Integer is new Integer;
function F (I : Integer) return Boolean;
function F (I : New_Integer) return Boolean;
Then we get the following GDB session:
(gdb) print f(1)
Multiple matches for f
[0] cancel
[1] foo.f at foo.adb:23
[2] foo.f at foo.adb.28
>
While the source location information is sufficient in order to
determine which one to select, one has to look for them in source files,
which is not convenient.
This commit tunes this menu in order to also include the list of formal
and return types (if any) in each entry. The above then becomes:
(gdb) print f(1)
Multiple matches for f
[0] cancel
[1] foo.f (integer) return boolean at foo.adb:23
[2] foo.f (foo.new_integer) return boolean at foo.adb.28
>
Since this output is more verbose than previously, this change also
introduces an option (set/show ada print-signatures) to get the original
output.
gdb/ChangeLog:
* ada-lang.c (print_signatures): New.
(ada_print_symbol_signature): New.
(user_select_syms): Add signatures to the output of candidate
symbols using ada_print_symbol_signature.
(_initialize_ada_language): Add a "set/show ada
print-signatures" boolean option.
gdb/testsuite/ChangeLog:
* gdb.ada/fun_overload_menu.exp: New testcase.
* gdb.ada/fun_overload_menu/foo.adb: New testcase.
Tested on x86_64-linux, no regression.
Rename target_ops.arch_setup to .post_create_inferior. In the Linux
hook, continue calling the low arch setup, then also set ptrace flags.
This corrects the possibility of running without flags, demonstrated by
a new test that would fail to catch a fork before.
gdb/gdbserver/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* target.h (struct target_ops) <arch_setup>: Rename to ...
(struct target_ops) <post_create_inferior>: ... this.
(target_arch_setup): Rename to ...
(target_post_create_inferior): ... this, calling post_create_inferior.
* server.c (start_inferior): Update target_arch_setup calls to
target_post_create_inferior.
* linux-low.c (linux_low_ptrace_options): Forward declare.
(linux_arch_setup): Update its comment for general use.
(linux_post_create_inferior): New, run arch_setup and setup ptrace.
(struct linux_target_ops): Use linux_post_create_inferior.
* lynx-low.c (struct lynx_target_ops): Update arch_setup stub comment
to post_create_inferior.
* nto-low.c (struct nto_target_ops): Likewise.
* spu-low.c (struct spu_target_ops): Likewise.
* win32-low.c (struct win32_target_ops): Likewise.
gdb/testsuite/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* gdb.base/catch-fork-static.exp: New.
In my remote cross testing (x86_64 host and aarch64 target), the test
gdb.base/sizeof.exp is skipped because gdb,noinferiorio is defined in
my gdbserver board file. Tests are skipped because the test checks
the expected value from the program's output, but I don't see why must
do it this way. With my patch applied, we can save the result in variable
in the program, and check the variable then. Then, the test doesn't rely
on inferiorio.
gdb/testsuite:
2015-12-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/sizeof.c: Don't include stdio.h and
../lib/unbuffer_output.c.
(main): New variable 'size' and 'value'. Remove printf and
gdb_unbuffer_output. Assign return value to size and value.
* gdb.base/sizeof.exp: Remove the checking to gdb,noinferiorio
at the beginning.
(check_sizeof): Check the result by printing variable 'size'.
(check_valueof): Check the result by printing variable 'value'.
Testing with "maint set target-non-stop on" causes regressions in
tests that rely on TARGET_WAITKIND_NO_RESUMED, which isn't modelled on
the RSP. In real all-stop, gdbserver detects the situation and
reporst error to GDB, and so the tests (e.g.,
gdb.threads/no-unwaited-for-left.exp) at fail quickly. But with
"maint set target-non-stop on", GDB instead hangs forever waiting for
a stop reply that never comes, and so the tests take longer to time
out.
This adds a new "N" stop reply packet that maps 1-1 to
TARGET_WAITKIND_NO_RESUMED.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* NEWS (New remote packets): Mention the N stop reply.
* remote.c (remote_protocol_features): Add "no-resumed" entry.
(remote_query_supported): Report no-resumed+ support.
(remote_parse_stop_reply): Handle 'N'.
(process_stop_reply): Handle TARGET_WAITKIND_NO_RESUMED.
(remote_wait_as): Handle 'N' / TARGET_WAITKIND_NO_RESUMED.
(_initialize_remote): Register "set/show remote
no-resumed-stop-reply" commands.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* gdb.texinfo (Stop Reply Packets): Document the N stop reply.
(Remote Configuration): Add the "set/show remote
no-resumed-stop-reply" to the available settings table.
(General Query Packets): Document the "no-resumed" qSupported
feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* linux-low.c (linux_wait_1): If the last resumed thread is gone,
report TARGET_WAITKIND_NO_RESUMED.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_NO_RESUMED.
* server.c (report_no_resumed): New global.
(handle_query) <qSupported>: Handle "no-resumed+". Report
"no-resumed+" support.
(resume): When the target reports TARGET_WAITKIND_NO_RESUMED, only
return error if the client doesn't support no-resumed events.
(push_stop_notification): New function.
(handle_target_event): Use it. Report TARGET_WAITKIND_NO_RESUMED
events if the client supports them.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.
The range-stepping tests fail with "maint set target-non-stop on" mode
because exec_cmd_expect_vCont_count doesn't know that in non-stop
mode, vCont's reply is simply "OK".
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
Handle non-stop mode vCont replies.
Testing with the extended-remote board with "maint set target-non-stop
on" shows a dprintf-non-stop.exp regression. The issue is simply that
the test is expecting output that is only valid for the native target:
native:
[process 8676] #1 stopped.
remote:
[Thread 8900.8900] #1 stopped.
In order to expose this without "maint set target-non-stop on", this
restarts gdb with non-stop mode already enabled.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf-non-stop.exp: Use build_executable instead of
prepare_for_testing. Start gdb with "set non-stop on" appended to
GDBFLAGS. Lax expected stop output.
Testing with "maint set target-non-stop on" makes mi-nonstop.exp run
with the extended-remote board. That reveals that mi-nonstop.exp is
using the wrong predicate to check for "using remote protocol".
This is not visible today because non-stop tests all fail to run with
extended-remote board, because they spawn gdb and then do "set
non-stop on". However, with that board, gdb connects to the gdbserver
from within mi_gdb_start, and changing non-stop when already connected
doesn't work. Fix that by instead enabling non-stop mode on gdb's
command line.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-nonstop.exp: Append "set non-stop on" to GDBFLAGS
instead of issuing "-gdb-set non-stop 1" after starting gdb.
Use mi_is_target_remote instead of checking "is_remote target".
* lib/gdb.exp (gdb_is_target_remote): Rename to ...
(gdb_is_target_remote_prompt): ... this, and add 'prompt_regexp'
parameter.
(gdb_is_target_remote): Reimplement.
* lib/mi-support.exp (mi_is_target_remote): New procedure.
Both ARM and AArch64 have defined some SIMD data types in arm_neon.h,
but we don't have a test case for passing them and returning them in
inferior call. This test also covers passing and returning
homogeneous short vector aggregate (defined by AArch64 ABI document)
in inferior call too.
gdb/testsuite:
* gdb.arch/arm-neon.exp: New.
* gdb.arch/arm-neon.c: New.
Hi,
I see one fail on aarch64-linux testing,
FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
because GDB prints two frames-invalid annotation but the test expects
only one.
next^M
^M
^Z^Zpost-prompt^M
^M
^Z^Zstarting^M
^M
^Z^Zframes-invalid^M
^M
^Z^Zframes-invalid^M
^M
Note I also see the fail on Debian-s390x-m64 too.
https://sourceware.org/ml/gdb-testers/2015-q4/msg07291.html
The test shouldn't only expect one frames-invalid annotation, because
there can be multiple times of stop/resume before the user visible
stop. Ulrich did something similar before
https://www.sourceware.org/ml/gdb-patches/2009-06/msg00118.html
This patch only changes ${frames_invalid} to \(${frames_invalid}\)*
in the regexp pattern.
The patch below fixes the fail on aarch64-linux.
gdb/testsuite:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* gdb.cp/annota2.exp: Allow multiple occurrences of the
frames-invalid annotation.
Variable frames_invalid was defined, but wasn't used much. This patch
is to replace the literals in the regexp with ${frames_invalid}.
gdb/testsuite:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* gdb.cp/annota2.exp: Use ${frames_invalid}.
I couldn't find a test that verified the thread name functionality, so I
created a new one.
A target board can define gdb,no_thread_names if it doesn't support thread
names and wants to skip the tests that uses them.
This test has been made with Linux in mind. Not all platforms use
pthread_setname_np to set the thread name, but some #ifdefs can be added
later in order to support other platforms.
Tested on x86-64 Ubuntu 14.04, native and remote.
gdb/testsuite/ChangeLog:
* gdb.threads/names.exp: New file.
* gdb.threads/names.c: New file.
* README: Mention gdb,no_thread_names.
If GDB has been configured without libipt support, i.e. HAVE_LIBIPT is
undefined, and is running on a system that supports Intel(R) Processor Trace,
GDB will run into an internal error when trying to decode the trace.
(gdb) record btrace
(gdb) s
usage (name=0x7fffffffe954 "fib-64")
at src/fib.c:12
12 fprintf(stderr, "usage: %s <num>\n", name);
(gdb) info record
Active record target: record-btrace
Recording format: Intel(R) Processor Trace.
Buffer size: 16kB.
gdb/btrace.c:971: internal-error: Unexpected branch trace format.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This requires a system with Linux kernel 4.1 or later running on a 5th
Generation Intel Core processor or later.
The issue is documented as PR 19297.
When trying to enable branch tracing, in addition to checking the target
support for the requested branch tracing format, also check whether GDB
supports. it.
gdb/
* btrace.c (btrace_enable): Check whether HAVE_LIBIPT is defined.
testsuite/
* lib/gdb.exp (skip_btrace_pt_tests): Check for a "GDB does not
support" error.
Before:
(gdb) info display
Auto-display expressions now in effect:
Num Enb Expression
3: y 1
2: y 1
1: y 1
After:
(gdb) info display
Auto-display expressions now in effect:
Num Enb Expression
1: y 1
2: y 1
3: y 1
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* printcmd.c (display_command): Append new display at the end of
the list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/display.exp: Expect displays to be sorted in ascending
order. Use multi_line.
* gdb.base/solib-display.exp: Likewise.
Before:
(gdb) info checkpoints
3 process 29132 at 0x4008ad, file foo.c, line 81
2 process 29131 at 0x4008ad, file foo.c, line 81
1 process 29130 at 0x4008ad, file foo.c, line 81
* 0 Thread 0x7ffff7fc5740 (LWP 29128) (main process) at 0x4008ad, file foo.c, line 81
After:
(gdb) info checkpoints
* 0 Thread 0x7ffff7fc5740 (LWP 29128) (main process) at 0x4008ad, file foo.c, line 81
1 process 29130 at 0x4008ad, file foo.c, line 81
2 process 29131 at 0x4008ad, file foo.c, line 81
3 process 29132 at 0x4008ad, file foo.c, line 81
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* printcmd.c (display_command): Append new display at the end of
the list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/display.exp: Expect displays to be sorted in ascending
order. Use multi_line.
* gdb.base/solib-display.exp: Likewise.
Before:
(gdb) info threads
Id Target Id Frame
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
After:
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc5740 (LWP 29030) 0x0000003b37209237 in pthread_join (threadid=140737353893632, thread_return=0x0) at pthread_join.c:92
2 Thread 0x7ffff7fc4700 (LWP 29034) 0x000000000040087b in child_function_2 (arg=0x0) at foo.c:60
3 Thread 0x7ffff77c3700 (LWP 29035) callme () at foo.c:30
gdb/doc/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.texinfo (Inferiors and Programs): Adjust "maint info
program-spaces" example to ascending order listing.
(Threads): Adjust "info threads" example to ascending order
listing.
(Forks): Adjust "info inferiors" example to ascending order
listing.
gdb/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* inferior.c (add_inferior_silent): Append the new inferior to the
end of the list.
* progspace.c (add_program_space): Append the new pspace to the
end of the list.
* thread.c (new_thread): Append the new thread to the end of the
list.
gdb/testsuite/ChangeLog:
2015-11-24 Pedro Alves <palves@redhat.com>
PR 17539
* gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
threads in ascending order.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.multi/base.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/break-while-running.exp: Likewise.
* gdb.threads/execl.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* gdb.threads/info-threads-cur-sal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/multiple-step-overs.exp: Likewise.
* gdb.threads/next-bp-other-thread.exp: Likewise.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
* gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
* gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
* lib/mi-support.exp (mi_reverse_list): Delete.
(mi_check_thread_states): No longer reverse list.
When trying to save fast tracepoints to file, gdb returns internal failure:
gdb/breakpoint.c:13446: internal-error: unhandled tracepoint type 27
A problem internal to GDB has been detected, further debugging may prove unreliable.
And no file including the fast tracepoints definition is created.
The patch also extends save-trace.exp to test saving tracepoint with a
fast tracepoint in there. Note that because this test doesn't actually
inserts the tracepoints in the program, we can run it with targets that
don't actually support fast tracepoints (or tracepoints at all).
gdb/ChangeLog:
* breakpoint.c (tracepoint_print_recreate): Fix logic error
if -> else if.
gdb/testsuite/ChangeLog:
* gdb.trace/actions.c: Include trace-common.h.
(main): Add a location for a fast tracepoint.
* gdb.trace/save-trace.exp: Set a fast tracepoint in addition to
the normal tracepoints.
(gdb_verify_tracepoints): Adjust number of expected tracepoints.
Some code is duplicated, to run the test twice with absolute and
relative paths, so I factored it out in a few procs. It uses
with_test_prefix to differentiate between test runs.
I replaced usages of "save-tracepoints" with "save tracepoint", since
the former is deprecated.
I also removed the "10.x", as it doesn't make much sense anymore. It
isn't used in general in the testsuite, and I don't think it's really
useful.
gdb/testsuite/ChangeLog:
* save-trace.exp: Factor out code to these...
(gdb_save_tracepoints): New.
(gdb_load_tracepoints): New.
(do_save_load_test): New.
The comment for the code in question says:
/* If the minimal symbol has a zero size, save it
but keep scanning backwards looking for one with
a non-zero size. A zero size may mean that the
symbol isn't an object or function (e.g. a
label), or it may just mean that the size was not
specified. */
As written, the code in question will only scan past the first symbol
of zero size. My change fixes the implementation to match the
comment.
Having this correct is important when the compiler generates several
local labels that are left in place by the linker. (I've been told
that the linker should eliminate these symbols, but I know of one
architecture for which this is not happening.)
I've created a test case called asmlabel.c. It's pretty simple:
main (int argc, char **argv)
{
asm ("L0:");
v = 0;
asm ("L1:");
v = 1; /* set L1 breakpoint here */
asm ("L2:");
v = 2; /* set L2 breakpoint here */
return 0;
}
If breakpoints are placed on the lines indicated by the comments,
this is the behavior of GDB built without my patch:
(gdb) continue
Continuing.
Breakpoint 2, L1 () at asmlabel.c:26
26 v = 1; /* set L1 breakpoint here */
Note that L1 appears as the function instead of main. This is not
what we want to happen. With my patch in place, we see the desired
behavior instead:
(gdb) continue
Continuing.
Breakpoint 2, main (argc=1, argv=0x7fffffffdb88) at asmlabel.c:26
26 v = 1; /* set L1 breakpoint here */
gdb/ChangeLog:
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Scan backwards
over all zero-sized symbols.
gdb/testsuite/ChangeLog:
* gdb.base/asmlabel.exp: New test.
* gdb.base/asmlabel.c: New test case.
One of our users reported an internal error using the "bt full"
command. In their situation, reproducing involved the following
scenario:
(gdb) frame 1
(gdb) bt full
#0 0xf7783430 in __kernel_vsyscall ()
No symbol table info available.
#1 0xf5550aeb in waitpid () at ../sysdeps/unix/syscall-template.S:81
No locals.
[...]
#6 0x0fe83139 in xxxx (arg=...)
[...some locals printed, and then...]
<S17b> =
[...]/dwarf2loc.c:364: internal-error: dwarf_expr_frame_base: Assertion
`framefunc != NULL' failed.
As shown above, the error happens while GDB is trying to print the value
of <S17b>, which is a local string internally generated by the compiler.
For that, it finds that the array lives in memory, and therefore tries
to create a struct value for it via:
case DWARF_VALUE_MEMORY:
{
CORE_ADDR address = dwarf_expr_fetch_address (ctx, 0);
[...]
retval = value_at_lazy (type, address + byte_offset);
Unfortunately for us, TYPE happens to be an array whose bounds
are dynamic. More precisely, the bounds of our arrays are described
in the debugging info as being...
<4><2c1985e>: Abbrev Number: 33 (DW_TAG_subrange_type)
<2c1985f> DW_AT_type : <0x2c1989c>
<2c19863> DW_AT_lower_bound : <0x2c19835>
<2c19867> DW_AT_upper_bound : <0x2c19841>
... which are references to a pair of local variables. For instance,
the lower bound is a reference to the following DIE
<3><2c19835>: Abbrev Number: 32 (DW_TAG_variable)
<2c19836> DW_AT_name : [...]
<2c1983a> DW_AT_type : <0x2c198b4>
<2c1983e> DW_AT_artificial : 1
<2c1983e> DW_AT_location : 2 byte block: 91 58 (DW_OP_fbreg: -40)
As a result of the above, value_at_lazy indirectly triggers
a resolution of TYPE (via value_from_contents_and_address),
which means a resolution of TYPE's bounds, and as seen in
the DW_AT_location attribute above for our bounds, computing
the bound's location requires the frame (its location expression
uses DW_OP_fbreg).
Unfortunately for us, value_at_lazy does not get passed a frame,
we've lost the relevant frame when we try to resolve the array's
bounds. Instead, resolve_dynamic_range gets calls dwarf2_evaluate_property
with NULL as the frame:
static struct type *
resolve_dynamic_range (struct type *dyn_range_type,
struct property_addr_info *addr_stack)
{
[...]
if (dwarf2_evaluate_property (prop, NULL, addr_stack, &value))
^^^^
... which then handles this by using the selected frame instead:
if (frame == NULL && has_stack_frames ())
frame = get_selected_frame (NULL);
In our case, the selected frame happens to be frame #1, which is
a frame where we have a minimal amount of debugging info, and in
particular, no debug info for the function itself. And because of that,
when we try to determine the frame's base...
static void
dwarf_expr_frame_base (void *baton, const gdb_byte **start,
size_t * length)
{
struct dwarf_expr_baton *debaton = (struct dwarf_expr_baton *) baton;
const struct block *bl = get_frame_block (debaton->frame, NULL);
[...]
framefunc = block_linkage_function (bl);
... framefunc ends up being NULL, which triggers the assert
in that same function:
gdb_assert (framefunc != NULL);
This patches avoids the issue by temporarily setting the selected_frame
before printing the locals of each frames.
This patch also adds a small testcase, which reproduces the same
issue, but with a slightly different outcome:
(gdb) bt full
#0 0x000000000040049a in opaque_routine ()
No symbol table info available.
#1 0x0000000000400532 in main () at wrong_frame_bt_full-main.c:20
my_table_size = 3
my_table = <error reading variable my_table (frame address is not available.)>
With this patch, the output becomes:
(gdb) bt full
[...]
my_table = {0, 1, 2}
gdb/ChangeLog:
* stack.c (print_frame_local_vars): Temporarily set the selected
frame to FRAME while printing the frame's local variables.
gdb/testsuite/ChangeLog:
* gdb.base/wrong_frame_bt_full-main.c: New file.
* gdb.base/wrong_frame_bt_full-opaque.c: New file.
* gdb.base/wrong_frame_bt_full.exp: New file.
Using the gdb.ada/var_rec_arr.exp test, where the program declares
an array of variant records...
type Record_Type (I : Small_Type := 0) is record
S : String (1 .. I);
end record;
type Array_Type is array (Integer range <>) of Record_Type;
... and then a variable A1 of type Array_Type, the following command
ocassionally trigger an internal error trying to allocate more memory
than we have left:
(gdb) ptype a1(1)
[...]/utils.c:1089: internal-error: virtual memory exhausted.
A problem internal to GDB has been detected,
[...]
What happens is that recent versions of GNAT are able to generate
DWARF expressions for type Record_Type, and therefore the record's
DW_AT_byte_size is not a constant, which unfortunately breaks
an assumption made by dwarf2read.c:read_structure_type when it does:
attr = dwarf2_attr (die, DW_AT_byte_size, cu);
if (attr)
{
TYPE_LENGTH (type) = DW_UNSND (attr);
}
As a result of this, when ada_evaluate_subexp tries to create
a value_zero for a1(1) while processing the OP_FUNCALL operator
as part of evaluating the subscripting operation in no-side-effect
mode, we try to allocate a value with a bogus size, potentially
triggering the out-of-memory internal error.
This patch avoids this issue by setting the length to zero in
this case. Until we decide to start supporting dynamic type
lengths in GDB's type struct, and it's not clear yet that
this is worth the effort (see added comment), that's probably
the best we can do.
gdb/ChangeLog:
* dwarf2read.c (read_structure_type): Set the type's length
to zero if it has a DW_AT_byte_size attribute which is not
a constant.
gdb/testsuite/ChangeLog:
* testsuite/gdb.ada/var_rec_arr.exp: Add "ptype a1(1)" test.
The Linux kernel disables the FPU upon returning to userland. This
introduces spurious failures in the register preservation tests in
callfuncs.exp, since the pstate.PEF bit gets cleared after system
calls.
This patch filters out the pstate register in sparc64-*-linux-gnu
targets, so the relevant tests are no longer fooled and pass.
gdb/testsuite/ChangeLog:
2015-11-20 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out the
pstate register when comparing registers values in
sparc64-*-linux-gnu targets to avoid spurious differences.
This patch adds a missing include that makes the test program to not
be built (--Wimplicit-function-declaration).
gdb/testsuite/ChangeLog:
2015-11-20 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.arch/sparc-sysstep.c: Include unistd.h for getpid.
This patch fixes all occurences of left-shifting negative constants in C cod
which is undefined by the C standard.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (_note): Fix left shift of negative value.
* gdb.trace/trace-condition.exp: Likewise.
This patch removes the leftover of the d10v stuff in the testsuite
directory. The d10v port was removed in GDB 6.7, but I happen to see
that there are still some leftovers about d10v in testsuite.
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/call-sc.exp (test_scalar_returns): Remove the
comments about d10v.
(test_scalar_returns): Likewise.
* gdb.base/d10v.ld: Remove.
* gdb.base/overlays.exp: Remove the target triplet checking for
d10v-*-*.
* gdb.base/structs.exp (test_struct_returns): Remove the
comments about d10v.
(test_struct_calls): Likewise.
gdb.base/gnu_vector.c printf the vector and gdb.base/gnu_vector.exp
expects the output by gdb_test_multiple. Nowadays, the test doesn't
expect the output from inferior_spawn_id, which is wrong. Even we
change the test to expect from inferior_spawn_id for the inferior
output, it is still possible the inferior exit before tcl/expect gets
the inferior output. We see this fail on both s390x-linux and
ppc-linux on buildbot,
FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
https://sourceware.org/ml/gdb-testers/2015-q4/msg04922.htmlhttps://sourceware.org/ml/gdb-testers/2015-q4/msg04952.html
In order to address these two shortcomings above in gnu_vector.exp,
this patch rewrites the test a little bit. Get rid of checking the
inferior output, and instead checking them by printing them. In this
way, the test can also be run on the target without inferior io
(gdb,noinferiorio is set in the board file).
gdb/testsuite:
2015-11-13 Yao Qi <yao.qi@linaro.org>
* gdb.base/gnu_vector.exp: Check the return value by "p res".
* gdb.base/gnu_vector.c: Don't include stdio.h.
(main): Don't print res and call add_some_intvecs.
The assembly code for emitting the proper tracepointable instruction
was duplicated in many places. Keep it in one place, to reduce work
needed for new targets.
gdb/testsuite/ChangeLog:
* gdb.trace/change-loc.h: include "trace-common.h", remove SYMBOL
macro.
(func5): Removed.
(func4): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace-lock.c: include "trace-common.h", remove SYMBOL
macro.
(func): Removed.
(thread_function): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/ftrace.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr1.c: include "trace-common.h", remove SYMBOL macro.
(pendfunc1): Remove.
(pendfunc): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/pendshr2.c: include "trace-common.h", remove SYMBOL macro.
(foo): Remove.
(pendfunc2): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-break.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-common.h: New header.
* gdb.trace/trace-condition.c: include "trace-common.h", remove SYMBOL
macro.
(func): Remove.
(marker): Use FAST_TRACEPOINT_LABEL.
* gdb.trace/trace-mt.c: include "trace-common.h", remove SYMBOL macro.
(func): Remove.
(thread_function): Use FAST_TRACEPOINT_LABEL.
These variables were used in many gdb.trace tests. Keep them in one place,
to reduce work needed for new targets.
gdb/testsuite/ChangeLog:
* gdb.trace/backtrace.exp: Use global fpreg/spreg definition, add $
in front.
* gdb.trace/change-loc.exp: Use global pcreg definition.
* gdb.trace/collection.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/entry-values.exp: Use global spreg definition, add $
in front.
* gdb.trace/mi-trace-frame-collected.exp: Use global pcreg definition.
* gdb.trace/pending.exp: Likewise.
* gdb.trace/report.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-condition.exp: Use global pcreg definition, add $
in front.
* gdb.trace/unavailable.exp: Use global pcreg/fpreg/spreg definition.
* gdb.trace/while-dyn.exp: Use global fpreg definition, add $
in front.
* lib/trace-support.exp: Define fpreg, spreg, pcreg variables.
Consider a function with the following signature...
function F (R : out Rec_Type) return Enum_Type;
... where Rec_Type is a simple record:
type Rec_Type is record
Cur : Integer;
end record;
Trying to "finish" from that function causes GDB to SEGV:
(gdb) fin
Run till exit from #0 bar.f (r=...) at bar.adb:5
0x00000000004022fe in foo () at foo.adb:5
5 I : Enum_Type := F (R);
[1] 18949 segmentation fault (core dumped) /[..]/gdb
This is related to the fact that funtion F has a parameter (R)
which is an "out" parameter being passed by copy. For those,
GNAT transforms the return value to be a record with multiple
fields: The first one is called "RETVAL" and contains the return
value shown in the source, and the remaining fields have the same
name as the "out" or "in out" parameters which are passed by copy.
So, in the example above, function F returns a struct that has
one field who name is "r".
Because "RETVAL" starts with "R", GDB thinks it's a wrapper field,
because it looks like the encoding used for variant records:
-- member_name ::= {choice} | others_choice
-- choice ::= simple_choice | range_choice
-- simple_choice ::= S number
-- range_choice ::= R number T number <<<<<----- here
-- number ::= {decimal_digit} [m]
-- others_choice ::= O (upper case letter O)
See ada_is_wrapper_field:
return (name != NULL
&& (startswith (name, "PARENT")
|| strcmp (name, "REP") == 0
|| startswith (name, "_parent")
|| name[0] == 'S' || name[0] == 'R' || name[0] == 'O'));
As a result of this, when trying to print the RETURN value,
we think that RETVAL is a wrapper, and thus recurse into
print_field_values...
if (ada_is_wrapper_field (type, i))
{
comma_needed =
print_field_values (TYPE_FIELD_TYPE (type, i),
valaddr,
(offset
+ TYPE_FIELD_BITPOS (type, i) / HOST_CHAR_BIT),
stream, recurse, val, options,
comma_needed, type, offset, language);
... which is a problem since print_field_values assumes that
the type it is given ("TYPE_FIELD_TYPE (type, i)" here), is also
a record type. However, that's not the case, since RETVAL is
an enum. That eventually leads GDB to a NULL type when trying to
extract fields out of the enum, which then leads to a SEGV when
trying to dereference it.
Ideally, we'd want to be a little more careful in identifying
wrapper fields, by enhancing ada_is_wrapper_field to be a little
more complete in its analysis of the field name before declaring
it a variant record wrapper. However, it's not super easy to do
so, considering that the choices can be combined together when
complex choices are used. Eg:
-- [...] the choice 1 .. 4 | 7 | -10 would be represented by
-- R1T4S7S10m
Given that we are working towards getting rid of GNAT encodings,
which means that the above will eventually disappear, we took
the more pragmatic approach is just treating RETVAL as a special
case.
gdb/ChangeLog:
* ada-lang.c (ada_is_wrapper_field): Add special handling
for fields called "RETVAL".
gdb/testsuite/ChangeLog:
* gdb.ada/fin_fun_out: New testcase.
