This adds the 'regset' parameter to the iterator callback.
Consequently the 'regset_from_core_section' method is dropped for all
targets that provide the iterator method.
This change prepares for replacing regset_from_core_section
everywhere, thereby eliminating one gdbarch interface. Since the
iterator is usually no more complex than regset_from_core_section
alone, targets that previously didn't define core_regset_sections will
then gain multi-arch capable core file generation support without
increased complexity.
gdb/ChangeLog:
* gdbarch.sh (iterate_over_regset_sections_cb): Add regset
parameter.
* gdbarch.h: Regenerate.
* corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset
iterator.
(get_core_register_section): Add parameter 'regset' and use it, if
set. Add parameter 'min_size' and verify the bfd section size
against it.
(get_core_registers_cb): Add parameter 'regset' and pass it to
get_core_register section. For the "standard" register sections
".reg" and ".reg2", set an appropriate default for human_name.
(get_core_registers): Don't abort when the gdbarch has an iterator
but no regset_from_core_section. Add NULL/0 for parameters
'regset'/'min_size' in calls to get_core_register_section.
* linux-tdep.c (linux_collect_regset_section_cb): Add parameter
'regset' and use it instead of calling the
regset_from_core_section gdbarch method.
* i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'.
* i386-tdep.c (i386_supply_xstateregset)
(i386_collect_xstateregset, i386_xstateregset): Moved to
i386-linux-tdep.c.
(i386_regset_from_core_section): Drop handling for .reg-xfp and
.reg-xstate.
(i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic
core file support only if the regset iterator hasn't been set.
* i386-linux-tdep.c (i386_linux_supply_xstateregset)
(i386_linux_collect_xstateregset, i386_linux_xstateregset): New.
Moved from i386-tdep.c and renamed to *_linux*.
(i386_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation. Allow any .reg-xstate size when reading
from a core file.
* amd64-tdep.c (amd64_supply_xstateregset)
(amd64_collect_xstateregset, amd64_xstateregset): Moved to
amd64-linux-tdep.c.
(amd64_regset_from_core_section): Remove.
(amd64_init_abi): Set new tdep field 'fpregset'. No longer
install an amd64-specific regset_from_core_section gdbarch method.
* amd64-linux-tdep.c (amd64_linux_supply_xstateregset)
(amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New.
Moved from amd64-tdep.c and renamed to *_linux*.
(amd64_linux_iterate_over_regset_sections): Add regset parameter
to each callback invocation. Allow any .reg-xstate size when
reading from a core file.
* arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove.
(arm_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(arm_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove.
(ppc_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(ppc_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields
gregset, sizeof_gregset, fpregset, and sizeof_fpregset.
(s390_regset_from_core_section): Remove.
(s390_iterate_over_regset_sections): Add regset parameter to each
callback invocation.
(s390_gdbarch_init): No longer set the regset_from_core_section
gdbarch method. Drop initialization of deleted tdep fields.
The core_regset_sections list in gdbarch (needed for multi-arch
capable core file generation support) is replaced by an iterator
method. Overall, this reduces the code a bit, and it allows for more
flexibility.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_regset_sections): Remove.
(amd64_linux_iterate_over_regset_sections): New.
(amd64_linux_init_abi_common): Don't install the regset section
list, but the new iterator in gdbarch.
* arm-linux-tdep.c (arm_linux_fpa_regset_sections)
(arm_linux_vfp_regset_sections): Remove. Move combined logic...
(arm_linux_iterate_over_regset_sections): ...here. New function.
(arm_linux_init_abi): Set iterator instead of section list.
* corelow.c (get_core_registers_cb): New function, logic moved
from...
(get_core_registers): ...loop body here. Use new iterator method
instead of walking through the regset section list.
* gdbarch.sh: Remove 'core_regset_sections'. New method
'iterate_over_regset_sections'. New typedef
'iterate_over_regset_sections_cb'.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* i386-linux-tdep.c (i386_linux_regset_sections)
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
Remove.
(i386_linux_iterate_over_regset_sections): New.
(i386_linux_init_abi): Don't choose a regset section list, but
install new iterator in gdbarch.
* linux-tdep.c (struct linux_collect_regset_section_cb_data): New.
(linux_collect_regset_section_cb): New function, logic moved
from...
(linux_collect_thread_registers): ...loop body here. Use iterator
method instead of walking through list.
(linux_make_corefile_notes_1): Check for presence of iterator
method instead of regset section list.
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections)
(ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections)
(ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections)
(ppc64_linux_fp_regset_sections): Remove. Move combined logic...
(ppc_linux_iterate_over_regset_sections): ...here. New function.
(ppc_linux_init_abi): Don't choose from above regset section
lists, but install new iterator in gdbarch.
* regset.h (struct core_regset_section): Remove.
* s390-linux-tdep.c (struct gdbarch_tdep): Add new fields
have_linux_v1, have_linux_v2, and have_tdb.
(s390_linux32_regset_sections, s390_linux32v1_regset_sections)
(s390_linux32v2_regset_sections, s390_linux64_regset_sections)
(s390_linux64v1_regset_sections, s390_linux64v2_regset_sections)
(s390x_linux64_regset_sections, s390x_linux64v1_regset_sections)
(s390x_linux64v2_regset_sections): Remove. Move combined logic...
(s390_iterate_over_regset_sections): ...here. New function. Use
new tdep fields.
(s390_gdbarch_init): Set new tdep fields. Don't choose from above
regset section lists, but install new iterator.
This commit renames nine files that contain code used by both 32- and
64-bit Intel ports such that their names are prefixed with "x86"
rather than "i386". All types, functions and variables within these
files are likewise renamed such that their names are prefixed with
"x86" rather than "i386". This makes GDB follow the convention used
by gdbserver such that 32-bit Intel code lives in files called
"i386-*", 64-bit Intel code lives in files called "amd64-*", and code
for both 32- and 64-bit Intel lives in files called "x86-*".
This commit only renames OS-independent files. The Linux ports of
both GDB and gdbserver now follow the i386/amd64/x86 convention fully.
Some ports still use the old convention where "i386" in file/function/
type/variable names can mean "32-bit only" or "32- and 64-bit" but I
don't want to touch ports I can't fully test except where absolutely
necessary.
gdb/ChangeLog:
* i386-nat.h: Renamed as...
* x86-nat.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-nat.c: Renamed as...
* x86-nat.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* common/i386-xstate.h: Renamed as...
* common/x86-xstate.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-cpuid.h: Renamed as...
* nat/x86-cpuid.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-gcc-cpuid.h: Renamed as...
* nat/x86-gcc-cpuid.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-dregs.h: Renamed as...
* nat/x86-dregs.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-dregs.c: Renamed as...
* nat/x86-dregs.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
gdb/gdbserver/ChangeLog:
* i386-low.h: Renamed as...
* x86-low.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-low.c: Renamed as...
* x86-low.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
2013-11-20 Walfred Tedeschi <walfred.tedeschi@intel.com>
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Add MPX
registers on the range of registers to be read from
xsave buffer.
(i386_linux_read_description): Add case for MPX.
* i386-linux-tdep.c: Include features/i386/i386-mpx-linux.c.
(i386_linux_gregset_reg_offset): Add MPX registers.
(i386_linux_core_read_description): Initialize also MPX.
(_initialize_i386_linux_tdep): Add mpx initialization.
* i386-tdep.h (gdbarch_tdep): Add fields bnd0r_regnum, bnd0_regnum,
mpx_register_names.
(i386_regnum): Add MPX registers.
(I386_MPX_NUM_REGS): New macro.
(i386_bnd_regnum_p): New function.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set
number of registers to be the number of BNDSTATUS.
(tdesc_i386_mpx_linux): Add description for MPX Linux registers.
* i386-tdep.c: Include features/i386/i386-mpx.c.
(i386_mpx_names): Add MPX register names array.
(i386_bnd_names): Add bnd pseudo register names array.
(i386_bndr_regnum_p): Lookup register numbers for bnd raw
registers.
(i386_bndr_regnum_p): Lookup register numbers for bnd raw registers.
(386_mpx_ctrl_regnum_p): Lookup register numbers for MPX control
registers.
(i386_bnd_type): New function.
(i386_pseudo_register_type): Use i386_bnd_type for bnd pseudo
register types.
(i386_pseudo_register_read_into_value): Add bnd case.
(i386_pseudo_register_write): Add bnd pseudo registers.
(i386_register_reggroup_p): Add MPX register to the group all.
(i386_validate_tdesc_p): Add MPX to the target description
validation.
(i386_pseudo_register_name): Add bnd pseudo registers.
(i386_gdbarch_init): Add MPX for architecture initialization.
(_initia_initialize_i386_tdep): Add mpx initialization.
* i387-tdep.c (xsave_mpx_offset): New vector for MPX offsets on
XSAVE buffer.
(XSAVE_MPX_ADDR): New macro.
(i387_supply_xsave): Add MPX case.
(i387_collect_xsave): Add MPX case.
* i387-tdep.h (I387_BND0R_REGNUM): New macro.
(I387_BNDCFGU_REGNUM): New macro.
(I387_NUM_MPX_REGS): New macro.
(I387_NUM_BND_REGS): New macro.
(I387_NUM_MPX_CTRL_REGS): New macro.
(I387_MPXEND_REGNUM): New macro.
* common/i386-xstate.h (I386_XSTATE_BNDREGS): New macro.
(I386_XSTATE_BNDCFG): Likewise.
(I386_XSTATE_MPX_MASK): Likewise.
(I386_XSTATE_ALL_MASK): New macro represents flags for all states.
(I386_XSTATE_BNDREGS_SIZE): New macro.
(I386_XSTATE_BNDCFG_SIZE): Likewise.
(I386_XSTATE_SIZE): Adapt for MPX.
(I386_XSTATE_MAX_SIZE): Likewise.
Change-Id: I9ddb7d49434d86fa18eb6b99515203d7c567aefd
Signed-off-by: Walfred Tedeschi <walfred.tedeschi@intel.com>
Conflicts:
gdb/ChangeLog
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
gdb/
* record-full.h, record-full.c (record_memory_query): Rename
to ...
(record_full_memory_query): ...this. Update all users.
(record_arch_list_add_reg): Rename to ...
(record_full_arch_list_add_reg): ...this. Update all users.
(record_arch_list_add_mem): Rename to ...
(record_full_arch_list_add_mem): ...this. Update all users.
(record_arch_list_add_end): Rename to ...
(record_full_arch_list_add_end): ...this. Update all users.
(record_gdb_operation_disable_set): Rename to ...
(record_full_gdb_operation_disable_set): ...this.
Update all users.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Fix -Wmissing-prototypes build.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Make it static.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): New prototype.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Likewise.
* arm-symbian-tdep.c (arm_symbian_skip_trampoline_code): Make it static.
(_initialize_arm_symbian_tdep): New prototype.
* arm-wince-tdep.c (arm_wince_skip_main_prologue): Make it static.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): New prototype.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Make it
static.
* lm32-tdep.c (_initialize_lm32_tdep): New prototype.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): New
prototype.
* microblaze-tdep.c (microblaze_debug, microblaze_fetch_instruction)
(microblaze_skip_prologue, microblaze_frame_cache): Make them static.
* mips-linux-tdep.c (mips_linux_regset_from_core_section): Make it
static.
* moxie-tdep.c (moxie_process_record): Likewise.
* remote-mips.c (mips_can_use_watchpoint, mips_insert_watchpoint)
(mips_remove_watchpoint, mips_stopped_by_watchpoint): Make them static.
* rl78-tdep.c (rl78_breakpoint_from_pc): Make it static.
(_initialize_rl78_tdep): New prototype.
* rx-tdep.c (rx_breakpoint_from_pc): Make it static.
(_initialize_rx_tdep): New prototype.
* solib-darwin.c (darwin_in_dynsym_resolve_code): Make it static.
(_initialize_darwin_solib): New prototype.
* solib-spu.c: Include solib-spu.h.
(_initialize_spu_solib): New prototype.
* spu-multiarch.c (_initialize_spu_multiarch): New prototype.
* tic6x-tdep.c (tic6x_analyze_prologue, tic6x_skip_prologue)
(tic6x_breakpoint_from_pc, tic6x_frame_unwind_cache)
(tic6x_software_single_step): Make it static.
(_initialize_tic6x_tdep): New prototype.
Fix disp-step-syscall.exp: fork: single step over fork.
* i386-linux-tdep.c (-i386_linux_get_syscall_number): Rename to ...
(i386_linux_get_syscall_number_from_regcache): ... here, new function
comment, change parameters gdbarch and ptid to regcache. Remove
parameter regcache, initialize gdbarch from regcache here.
(i386_linux_get_syscall_number, i386_linux_displaced_step_copy_insn):
New functions.
(i386_linux_init_abi): Install i386_linux_displaced_step_copy_insn
instead.
* i386-tdep.c (i386_syscall_p): Check also for 'sysenter' and
'syscall'. Make the 'int' check more strict.
gdb/testsuite/
Fix disp-step-syscall.exp: fork: single step over fork.
* gdb.base/disp-step-syscall.exp (syscall_insn): Anchor it by
whitespaces.
(single step over $syscall): Remove its check.
(single step over $syscall final pc): New check.
Fix reverse mode for syscall on AMD CPUs in 32-bit mode.
* i386-linux-tdep.c (i386_linux_intx80_sysenter_record): Rename to ...
(i386_linux_intx80_sysenter_syscall_record): ... here.
(i386_linux_init_abi): Initialize also I386_SYSCALL_RECORD.
Use the renamed function name.
* i386-tdep.c (i386_displaced_step_copy_insn): New function.
(i386_syscall_p): Change type of lengthp to int.
(i386_displaced_step_fixup): Handle kernels that run one past a
syscall insn.
* i386-linux-tdep.c (i386_linux_init_abi): Use
i386_displaced_step_copy_insn instead of
simple_displaced_step_copy_insn.
register note sections.
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
New variables.
(i386_linux_init_abi): Install list of supported register note
sections that matches the target description.
Michael Snyder <msnyder@vmware.com>
* i386-linux-tdep.c (i386_all_but_ip_registers_record): New
function.
(i386_linux_intx80_sysenter_record): Call
i386_all_but_ip_registers_record if syscall is sys_sigreturn
or sys_rt_sigreturn.
(I386_LINUX_xstate, I386_LINUX_frame_size): New macros.
(i386_linux_record_signal): New function.
(i386_linux_init_abi): Call set_gdbarch_process_record_signal.
* amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(amd64_linux_get_syscall_number): New function.
(amd64_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* breakpoint.c: New include: xml-syscall.h.
(set_raw_breakpoint_without_location): Setting the parameters
for the catch syscall feature.
(insert_catch_syscall): New.
(remove_catch_syscall): New.
(breakpoint_hit_catch_syscall): New.
(print_it_catch_syscall): New.
(print_one_catch_syscall): New.
(print_mention_catch_syscall): New.
(catch_syscall_breakpoint_ops): New.
(syscall_catchpoint_p): New.
(create_catchpoint_without_mention): New.
(create_catchpoint): Modified in order to use
create_catchpoint_without_mention.
(create_syscall_event_catchpoint): New.
(clean_up_filters): New.
(catch_syscall_split_args): New.
(catch_syscall_command_1): New.
(delete_breakpoint): Add cleanup for catch syscall.
(is_syscall_catchpoint_enabled): New.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
(catch_syscall_completer): New completer function.
(add_catch_command): Add the completer function for catchpoints.
* breakpoint.h (syscalls_to_be_caught): New vector.
(catch_syscall_enabled): New.
(catching_syscall_number): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* gdbarch.sh: Add syscall catchpoint functions and structures.
(get_syscall_number): New.
(UNKNOWN_SYSCALL): New definition.
* i386-linux-nat.c (i386_linux_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* i386-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall name for the architecture.
(i386_linux_get_syscall_number): New.
(i386_linux_init_abi): Register the correct functions for syscall
catchpoint; set the correct syscall file name.
* inf-child.c (inf_child_set_syscall_catchpoint): New.
(inf_child_target): Assign default values to target_ops.
* inf-ptrace.c (inf_ptrace_resume): Select the proper request
to be made for ptrace() considering if we are catching syscalls
or not.
* inferior.h (struct inferior): Included new variables
any_syscall_count, syscalls_counts and total_syscalls_count,
used to keep track of requested syscall catchpoints.
* infrun.c (resume): Add syscall catchpoint.
(deal_with_syscall_event): New.
(handle_inferior_event): Add syscall entry/return events.
(inferior_has_called_syscall): New.
* linux-nat.c: Define some helpful variables to track wether we have
support for the needed ptrace option.
(linux_test_for_tracesysgood): New.
(linux_supports_tracesysgood): New.
(linux_enable_tracesysgood): New.
(linux_enable_event_reporting): Save the current used ptrace
options.
(linux_child_post_attach): Calling linux_enable_tracesysgood.
(linux_child_post_startup_inferior): Likewise.
(linux_child_set_syscall_catchpoint): New function.
(linux_handle_extended_wait): Handle the case which the inferior stops
because it has called or returned from a syscall.
(linux_target_install_ops): Install the necessary functions to handle
syscall catchpoints.
* linux-nat.h (struct lwp_info): Include syscall_state into the
structure, which indicates if we are in a syscall entry or return.
* ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
syscall filename for the arch.
(ppc_linux_get_syscall_number): New.
(ppc_linux_init_abi): Register the correct functions for syscall
catchpoint; setting the correct name for the XML syscall file.
* target.c (update_current_target): Update/copy functions related to
syscall catchpoint.
(target_waitstatus_to_string): Add syscall catchpoint entry/return
events.
* target.h (struct target_waitstatus): Add syscall number.
(struct syscall): New struct to hold information about syscalls
in the system.
(struct target_ops): Add ops for syscall catchpoint.
(inferior_has_called_syscall): New.
(target_set_syscall_catchpoint): New.
* xml-support.c (xml_fetch_content_from_file): New function,
transferred from xml-tdesc.c.
* xml-support.h (xml_fetch_content_from_file): New.
* xml-tdesc.c (fetch_xml_from_file): Function removed;
transferred to xml-support.c.
(file_read_description_xml): Updated to use the new
xml_fetch_content_from_file function.
* syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
support.
* syscalls/amd64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use amd64 architecture.
* syscalls/i386-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use i386 architecture.
* syscalls/ppc-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC architecture.
* syscalls/ppc64-linux.xml: New file containing information about
syscalls for GNU/Linux systems that use PPC64 architecture.
* xml-syscall.c: New file containing functions for manipulating
syscall's XML files.
* xml-syscall.h: New file, exporting the functions above mentioned.
* Makefile.in: Support for relocatable GDB datadir and XML
syscall.
* NEWS: Added information about the catch syscall feature.
* doc/gdb.texinfo (Set Catchpoints): Documentation about the new
feature.
* testsuite/Makefile.in: Inclusion of catch-syscall object.
* testsuite/gdb.base/catch-syscall.c: New file.
* testsuite/gdb.base/catch-syscall.exp: New file.
* amd64-linux-tdep.h (enum amd64_syscall): New enum consts,
to replace literal consts used in amd64-linux-tdep.c
* linux-record.h (enum gdb_syscall): New enum consts, to replace
literal consts used in amd64-linux-tdep.c and linux-record.c.
* amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
translate from native amd64 Linux syscall id to internal gdb id.
(amd64_linux_syscall_record): Switch statement abstracted out
and replaced with a call to amd64_canonicalize_syscall.
* linux-record.c (record_linux_system_call): Replace literal
consts with enum consts.
* i386-linux-tdep.c (i386_canonicalize_syscall): New function,
trivially translate from native i386 Linux syscalls to gdb syscalls.
(i386_linux_intx80_sysenter_record):
Add process record Linux system call 64 bits support.
* linux-record.h (linux_record_tdep): Add size_pointer,
size_size_t, size_iovec and arg6. Change the values of
size_int, size_long and size_ulong to
gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
* i386-linux-tdep.c (i386_linux_init_abi): Ditto.
(i386_linux_intx80_sysenter_record): Add a check for system
call number.
* linux-record.c (record_linux_system_call): Make this
function support 64 bits.
* linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
interfaces.
* i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
I386_LINUX_RECORD_FCNTL_F_GETLK64,
I386_LINUX_RECORD_FCNTL_F_SETLK64,
I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
of I386 Linux sys_fcntl arguments.
(i386_linux_init_abi): Set macros values to linux_record_tdep.
* linux-record.c (record_linux_system_call): Change to use
the interface in linux_record_tdep in sys_fcntl and
sys_fcntl64.
* linux-record.c (record_linux_system_call): Fix the process
record build error about type in CYGWIN.
* i386-linux-tdep.c (i386_linux_record_tdep): New variable.
This struct has the argument for the function
"record_linux_system_call".
(i386_linux_intx80_sysenter_record): New function. Parse the
system call instruction and call function
"record_linux_system_call" to record execute log.
(i386_linux_init_abi): Initialize "i386_linux_record_tdep".
Set "i386_linux_intx80_sysenter_record" to
"i386_intx80_record" and "i386_sysenter_record".
core_regset_sections.
* gdbarch.c: Refreshed.
* gdbarch.h: Refreshed.
* regset.h (core_regset_section): Declared.
* linux-nat.c (linux_nat_do_thread_registers): Added
support for the new gdbarch struct core_regset_sections.
* utils.c (host_address_to_string): New function.
* defs.h (host_address_to_string): New prototype.
* i386-linux-tdep.c (i386_regset_rections): New register
sections list for i386.
(i386_linux_init_abi): Initialized new gdbarch struct
core_regset_sections.
* Makefile.in: Updated to reflect dependency changes.
* ppc-linux-tdep.c (ppc_regset_sections): Register
sections list for ppc.
(ppc_linux_init_abi): Initialized new gdbarch struct
core_regset_sections
Andreas Arnez