This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
I cannot reproduce any wrong case having the code removed.
I just do not find it correct to have it disabled. But at the same time I do
like much / I do not find correct the code myself. It is a bit problematic to
have struct value describing a memory content which is no longer present
there.
What happens there:
------------------------------------------------------------------------------
volatile int vv;
static __attribute__((noinline)) int
bar (int &ref) {
ref = 20;
vv++; /* break-here */
return ref;
}
int main (void) {
int var = 10;
return bar (var);
}
------------------------------------------------------------------------------
<4><c7>: Abbrev Number: 13 (DW_TAG_GNU_call_site_parameter)
<c8> DW_AT_location : 1 byte block: 55 (DW_OP_reg5 (rdi))
<ca> DW_AT_GNU_call_site_value: 2 byte block: 91 74 (DW_OP_fbreg: -12)
<cd> DW_AT_GNU_call_site_data_value: 1 byte block: 3a (DW_OP_lit10)
------------------------------------------------------------------------------
gdb -ex 'b value_addr' -ex r --args ../gdb ./1 -ex 'watch vv' -ex r -ex 'p &ref@entry'
->
6 return ref;
bar (ref=@0x7fffffffd944: 20, ref@entry=@0x7fffffffd944: 10) at 1.C:25
------------------------------------------------------------------------------
At /* break-here */ struct value variable 'ref' is TYPE_CODE_REF.
With FSF GDB HEAD:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$1 = lval_memory
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$3 = 0x7fffffffd944
With your #if0-ed code:
(gdb) x/gx arg1.contents
0x6004000a4ad0: 0x00007fffffffd944
(gdb) p ((struct value *)arg1.location.computed.closure).lval
$8 = not_lval
(gdb) p/x ((struct value *)arg1.location.computed.closure).location.address
$9 = 0x0
I do not see how to access
((struct value *)arg1.location.computed.closure).location.address
from GDB CLI. Trying
(gdb) p &ref@entry
will invoke value_addr()'s:
if (TYPE_CODE (type) == TYPE_CODE_REF)
/* Copy the value, but change the type from (T&) to (T*). We
keep the same location information, which is efficient, and
allows &(&X) to get the location containing the reference. */
and therefore the address gets fetched already from
arg1.contents
and not from
((struct value *)arg1.location.computed.closure).location.address
.
And for any other type than TYPE_CODE_REF this code you removed does not get
executed at all. This DW_AT_GNU_call_site_data_value DWARF was meant
primarily for Fortran but with -O0 entry values do not get produced
and with -Og and higher Fortran always optimizes out the passing by reference.
If you do not like the removed code there I am OK with removing it as I do not
know how to make it's use reproducible for user anyway. In the worst case
- if there really is some way how to exploit it - one should just get
Attempt to take address of value not located in memory.
instead of some wrong value and it may be easy to fix then.
gdb/
2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2loc.c (value_of_dwarf_reg_entry): Remove setting value address
for reference entry value target data value.
Message-ID: <20140720150727.GA18488@host2.jankratochvil.net>
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU,
because dwarf2-frame.c common code did not support the situation where the
stack and/or frame pointer is maintained in a *vector* register. This is
because read_addr_from_reg is hard-coded to assume that such pointers can
be read from registers via a simple get_frame_register / unpack_pointer
operation.
Now, there *is* a routine address_from_register that calls into the
appropriate tdep routines to handle pointer values in "weird" registers
like on SPU, but it turns out I cannot simply change dwarf2-frame.c to
use address_from_register. This is because address_from_register uses
value_from_register to create a (temporary) value, and that routine
at some point calls get_frame_id in order to set up that value's
VALUE_FRAME_ID entry.
However, the dwarf2-frame.c read_addr_from_reg routine will be called
during early unwinding (to unwind the frame's CFA), at which point the
frame's ID is not actually known yet! This would cause an assert.
On the other hand, we may notice that VALUE_FRAME_ID is only needed in the
value returned by value_from_register if that value is later used as an
lvalue. But this is obviously never done to the temporary value used in
address_from_register. So, if we could change address_from_register to
not call value_from_register but instead accept constructing a value
that doesn't have VALUE_FRAME_ID set, things should be fine.
To do that, we can change the value_from_register callback to accept
a FRAME_ID instead of a FRAME; the only existing uses of the FRAME
argument were either to extract its frame ID, or its gdbarch. (To
keep a way of getting at the latter, we also change the callback's
type from "f" to "m".) Together with the required follow-on changes
in the existing value_from_register implementations (including the
default one), this seems to fix the problem.
As another minor interface cleanup, I've removed the explicit TYPE
argument from address_from_register. This routine really always
uses a default pointer type, and in the new implementation it -to
some extent- relies on that fact, in that it will now no longer
handle types that require gdbarch_convert_register_p handling.
gdb:
2014-04-17 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (value_from_register): Make class "m" instead of "f".
Replace FRAME argument with FRAME_ID.
* gdbarch.c, gdbarch.h: Regenerate.
* findvar.c (default_value_from_register): Add GDBARCH argument;
replace FRAME by FRAME_ID. No longer call get_frame_id.
(value_from_register): Update call to gdbarch_value_from_register.
* value.h (default_value_from_register): Update prototype.
* s390-linux-tdep.c (s390_value_from_register): Update interface
and call to default_value_from_register.
* spu-tdep.c (spu_value_from_register): Likewise.
* findvar.c (address_from_register): Remove TYPE argument.
Do not call value_from_register; use gdbarch_value_from_register
with null_frame_id instead.
* value.h (address_from_register): Update prototype.
* dwarf2-frame.c (read_addr_from_reg): Use address_from_register.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for
address_from_register interface change.
The dwarf standard allow certain attributes to be expressed as dwarf
expressions rather than constants. For instance upper-/lowerbound attributes.
In case of a c99 variable length array the upperbound is a dynamic attribute.
With this change c99 vla behave the same as with static arrays.
1| void foo (size_t n) {
2| int ary[n];
3| memset(ary, 0, sizeof(ary));
4| }
(gdb) print ary
$1 = {0 <repeats 42 times>}
gdb/ChangeLog:
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
This reverts the following patch series, as they cause some regresssions.
commit 37c1ab67a3
type: add c99 variable length array support
gdb/
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
commit 26cb189f8b
vla: enable sizeof operator to work with variable length arrays
gdb/
* eval.c (evaluate_subexp_for_sizeof) <OP_VAR_VALUE>: If the type
passed to sizeof is dynamic evaluate the argument to compute the length.
commit 04b19544ef
vla: enable sizeof operator for indirection
gdb/
* eval.c (evaluate_subexp_for_sizeof) <UNOP_IND>: Create an indirect
value and retrieve the dynamic type size.
commit bcd629a44f
vla: update type from newly created value
gdb/
* ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
(ada_template_to_fixed_record_type_1): Likewise.
(ada_to_fixed_type_1): Likewise.
* cp-valprint.c (cp_print_value_fields_rtti): Likewise.
(cp_print_value): Likewise.
* d-valprint.c (dynamic_array_type): Likewise.
* eval.c (evaluate_subexp_with_coercion): Likewise.
* findvar.c (address_of_variable): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* valops.c (value_ind): Likewise.
* value.c (coerce_ref): Likewise.
commit b86138fb04
vla: print "variable length" for unresolved dynamic bounds
gdb/
* c-typeprint.c (c_type_print_varspec_suffix): Added
check for not yet resolved high bound. If unresolved, print
"variable length" string to the console instead of random
length.
commit e1969afbd4
vla: support for DW_AT_count
gdb/
* dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic
property and store it as the high bound and flag the range accordingly.
* gdbtypes.c (resolve_dynamic_bounds): If range is flagged as
RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound.
* gdbtypes.h (enum range_flags): New enum.
(struct range_bounds): Add flags member.
commit 92b09522dc
vla: resolve dynamic bounds if value contents is a constant byte-sequence
gdb/
* findvar.c (default_read_var_value): Resolve dynamic bounds if location
points to a constant blob.
commit 3bce82377f
vla: evaluate operand of sizeof if its type is a vla
gdb/
* eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
(evaluate_subexp_standard): Pass noside argument.
(evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
if noside equals EVAL_NORMAL. If the subscript yields a vla type
re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
* gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
* gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.
gdb/testsuite
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
commit 504f34326e
test: cover subranges with present DW_AT_count attribute
gdb/testsuite/
* gdb.dwarf2/count.exp: New file.
commit 1a237e0ee5
test: multi-dimensional c99 vla.
gdb/testsuite/
* gdb.base/vla-multi.c: New file.
* gdb.base/vla-multi.exp: New file.
commit 024e13b46f
test: evaluate pointers to C99 vla correctly.
gdb/testsuite/
* gdb.base/vla-ptr.c: New file.
* gdb.base/vla-ptr.exp: New file.
commit c8655f75e2
test: basic c99 vla tests for C primitives
gdb/testsuite/
* gdb.base/vla-datatypes.c: New file.
* gdb.base/vla-datatypes.exp: New file.
commit 58a84dcf29
test: add mi vla test
gdb/testsuite/
* gdb.mi/mi-vla-c99.exp: New file.
* gdb.mi/vla.c: New file.
The dwarf standard allow certain attributes to be expressed as dwarf
expressions rather than constants. For instance upper-/lowerbound attributes.
In case of a c99 variable length array the upperbound is a dynamic attribute.
With this change c99 vla behave the same as with static arrays.
1| void foo (size_t n) {
2| int ary[n];
3| memset(ary, 0, sizeof(ary));
4| }
(gdb) print ary
$1 = {0 <repeats 42 times>}
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
https://sourceware.org/ml/gdb-patches/2013-12/msg00144.html
The vector of unavailable parts of a value is currently byte based. Given
that we can model a value down to the bit level, we can potentially loose
information with the current implementation. After this patch we model the
unavailable information in bits.
gdb/ChangeLog
* dwarf2loc.c (read_pieced_value): Mark bits, not bytes
unavailable, use correct bit length.
* value.c (struct value): Extend comment on unavailable to
indicate that it is bit based.
(value_bits_available): New function.
(value_bytes_available): Call value_bits_available.
(value_entirely_available): Check against the bit length, not byte
length.
(mark_value_bits_unavailable): New function.
(mark_value_bytes_unavailable): Move contents to
mark_value_bits_unavailable, call to same.
(memcmp_with_bit_offsets): New function.
(value_available_contents_bits_eq): New function, takes the
functionality from value_available_contents_eq but uses
memcmp_with_bit_offsets now, and is bit not byte based.
(value_available_contents_eq): Move implementation into
value_available_contents_bits_eq, call to same.
(value_contents_copy_raw): Work on bits, not bytes.
(unpack_value_bits_as_long_1): Check availability in bits, not
bytes.
* value.h (value_bits_available): Declare new function.
(mark_value_bits_unavailable): Declare new function.
gdb/testsuite/ChangeLog
* gdb.trace/unavailable-dwarf-piece.c: New file.
* gdb.trace/unavailable-dwarf-piece.exp: New file.
In order to catch <optimized out> errors like we catch <unavailable>
errors, this adds a new OPTIMIZED_OUT_ERROR error code, and throws it
in various places.
gdb/ChangeLog
2013-12-06 Andrew Burgess <aburgess@broadcom.com>
Pedro Alves <palves@redhat.com>
* exceptions.h (errors): Add OPTIMIZED_OUT_ERROR.
* dwarf2loc.c (write_pieced_value): Throw OPTIMIZED_OUT_ERROR.
* frame.c (frame_unwind_register): Throw OPTIMIZED_OUT_ERROR.
* spu-tdep.c (spu_software_single_step): Throw
OPTIMIZED_OUT_ERROR.
* valops.c (value_assign): Throw OPTIMIZED_OUT_ERROR.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This is to help make it slightly clearer how this method is expected
to extract data from the given register.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs)
<read_addr_from_reg>: Renames "read_reg".
* dwarf2-frame.c (read_addr_from_reg): Renames "read_reg".
Adjust comment.
(dwarf2_frame_ctx_funcs, execute_stack_op, dwarf2_frame_cache):
Use read_addr_from_reg in place of read_reg.
* dwarf2expr.c (execute_stack_op): Use read_addr_from_reg
in place of read_reg.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Renames
dwarf_expr_read_reg.
(dwarf_expr_ctx_funcs): Replace dwarf_expr_read_reg
with dwarf_expr_read_addr_from_reg.
(needs_frame_read_addr_from_reg): Renames needs_frame_read_reg.
(needs_frame_ctx_funcs): Replace needs_frame_read_reg with
needs_frame_read_addr_from_reg.
Similar to qsort(), the glibc version of memcpy() also declares its
arguments with __attribute__(__nonnull__(...)). If NULL is passed
anyway, upstream GCC's new pass '-fisolate-erroneous-paths' typically
causes a trap in such cases. I've encountered this with GDB in
chain_candidate() when trying to execute the break.exp test case.
gdb/
2013-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* dwarf2loc.c (chain_candidate): Prevent invoking memcpy with
NULL.
Consider the following code, compiled at -O2 on ppc-linux:
procedure Increment (Val : in out Float; Msg : String);
The implementation does not really matter in this case). In our example,
this function is being called from a function with Param_1 set to 99.0.
Trying to break inside that function, and running until reaching that
breakpoint yields:
(gdb) b increment
Breakpoint 1 at 0x100014b4: file callee.adb, line 6.
(gdb) run
Starting program: /[...]/foo
Breakpoint 1, callee.increment (val=99.0, val@entry=0.0, msg=...)
at callee.adb:6
6 if Val > 200.0 then
The @entry value for parameter "val" is incorrect, it should be 99.0.
The associated call-site parameter DIE looks like this:
.uleb128 0xc # (DIE (0x115) DW_TAG_GNU_call_site_parameter)
.byte 0x2 # DW_AT_location
.byte 0x90 # DW_OP_regx
.uleb128 0x21
.byte 0x3 # DW_AT_GNU_call_site_value
.byte 0xf5 # DW_OP_GNU_regval_type
.uleb128 0x3f
.uleb128 0x25
The DW_AT_GNU_call_site_value uses a DW_OP_GNU_regval_type
operation, referencing register 0x3f=63, which is $f31,
an 8-byte floating register. In that register, the value is
stored using the usual 8-byte float format:
(gdb) info float
f31 99.0 (raw 0x4058c00000000000)
The current code evaluating DW_OP_GNU_regval_type operations
currently is (dwarf2expr.c:execute_stack_op):
result = (ctx->funcs->read_reg) (ctx->baton, reg);
result_val = value_from_ulongest (address_type, result);
result_val = value_from_contents (type,
value_contents_all (result_val));
What the ctx->funcs->read_reg function does is read the contents
of the register as if it contained an address. The rest of the code
continues that assumption, thinking it's OK to then use that to
create an address/ulongest struct value, which we then re-type
to the type specified by DW_OP_GNU_regval_type.
We're getting 0.0 above because the read_reg implementations
end up treating the contents of the FP register as an integral,
reading only 4 out of the 8 bytes. Being a big-endian target,
we read the high-order ones, which gives us zero.
This patch fixes the problem by introducing a new callback to
read the contents of a register as a given type, and then adjust
the handling of DW_OP_GNU_regval_type to use that new callback.
gdb/ChangeLog:
* dwarf2expr.h (struct dwarf_expr_context_funcs) <read_reg>:
Extend the documentation a bit.
<get_reg_value>: New field.
* dwarf2loc.c (dwarf_expr_get_reg_value)
(needs_frame_get_reg_value): New functions.
(dwarf_expr_ctx_funcs, needs_frame_ctx_funcs): Add "get_reg_value"
callback.
* dwarf2-frame.c (get_reg_value): New function.
(dwarf2_frame_ctx_funcs): Add "get_reg_value" callback.
* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_regval_type>:
Use new callback to compute result_val.
gdb/testsuite/ChangeLog:
* gdb.ada/O2_float_param: New testcase.
Currently, in some scenarios, GDB prints <optimized out> when printing
outer frame registers. An <optimized out> register is a confusing
concept. What this really means is that the register is
call-clobbered, or IOW, not saved by the callee. This patch makes GDB
say that instead.
Before patch:
(gdb) p/x $rax $1 = <optimized out>
(gdb) info registers rax
rax <optimized out>
After patch:
(gdb) p/x $rax
$1 = <not saved>
(gdb) info registers rax
rax <not saved>
However, if for some reason the debug info describes a variable as
being in such a register (**), we still want to print <optimized out>
when printing the variable. IOW, <not saved> is reserved for
inspecting registers at the machine level. The patch uses
lval_register+optimized_out to encode the not saved registers, and
makes it so that optimized out variables always end up in
!lval_register values.
** See <https://sourceware.org/ml/gdb-patches/2012-08/msg00787.html>.
Current/recent enough GCC doesn't mark variables/arguments as being in
call-clobbered registers in the ranges corresponding to function
calls, while older GCCs did. Newer GCCs will just not say where the
variable is, so GDB will end up realizing the variable is optimized
out.
frame_unwind_got_optimized creates not_lval optimized out registers,
so by default, in most cases, we'll see <optimized out>.
value_of_register is the function eval.c uses for evaluating
OP_REGISTER (again, $pc, etc.), and related bits. It isn't used for
anything else. This function makes sure to return lval_register
values. The patch makes "info registers" and the MI equivalent use it
too. I think it just makes a lot of sense, as this makes it so that
when printing machine registers ($pc, etc.), we go through a central
function.
We're likely to need a different encoding at some point, if/when we
support partially saved registers. Even then, I think
value_of_register will still be the spot to tag the intention to print
machine register values differently.
value_from_register however may also return optimized out
lval_register values, so at a couple places where we're computing a
variable's location from a dwarf expression, we convert the resulting
value away from lval_register to a regular optimized out value.
Tested on x86_64 Fedora 17
gdb/
2013-10-02 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): Adjust calls to
val_print_optimized_out.
* jv-valprint.c (java_print_value_fields): Likewise.
* p-valprint.c (pascal_object_print_value_fields): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full)
<DWARF_VALUE_REGISTER>: If the register was not saved, return a
new optimized out value.
* findvar.c (address_from_register): Likewise.
* frame.c (put_frame_register): Tweak error string to say the
register was not saved, rather than optimized out.
* infcmd.c (default_print_one_register_info): Adjust call to
val_print_optimized_out. Use value_of_register instead of
get_frame_register_value.
* mi/mi-main.c (output_register): Use value_of_register instead of
get_frame_register_value.
* valprint.c (valprint_check_validity): Likewise.
(val_print_optimized_out): New value parameter. If the value is
lval_register, print <not saved> instead.
(value_check_printable, val_print_scalar_formatted): Adjust calls
to val_print_optimized_out.
* valprint.h (val_print_optimized_out): New value parameter.
* value.c (struct value) <optimized_out>: Extend comment.
(error_value_optimized_out): New function.
(require_not_optimized_out): Use it. Use a different string for
lval_register values.
* value.h (error_value_optimized_out): New declaration.
* NEWS: Mention <not saved>.
gdb/testsuite/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-reg-undefined.exp <pattern_rax_rbx_rcx_print,
pattern_rax_rbx_rcx_info>: Set to "<not saved>".
* gdb.mi/mi-reg-undefined.exp (opt_out_pattern): Delete.
(not_saved_pattern): New.
Replace use of the former with the latter.
gdb/doc/
2013-10-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Registers): Expand description of saved registers
in frames. Explain <not saved>.
A couple years ago, dwarf_expr_fetch used to return a CORE_ADDR. It
was made to return a ULONGEST since, and the 'dwarf_regnum' local
adjusted accordingly, but, we kept printing it with paddress.
gdbarch_dwarf2_reg_to_regnum takes the register number as 'int', so
there's really no point in using ULONGEST/pulongest either.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): 'dwarf_regnum'
local is now int instead of ULONGEST. Print it with %d
instead of paddress.
I came across a pattern used to construct a value in the following way:
struct value *val = allocate_value_lazy (type);
VALUE_LVAL (val) = lval_memory;
set_value_address (val, address);
Instead we fold the above call into:
value_at_lazy (type, addr);
2013-08-27 Sanimir Agovic <sanimir.agovic@intel.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use value_at_lazy instead
of assembling value via allocate_value_lazy and attribute setter.
* findvar.c (default_read_var_value): Use value_at_lazy instead of
assembling value via allocate_value_lazy and attribute setter.
* valops.c (do_search_struct_field): Use value_at_lazy instead of
assembling value via allocate_value_lazy and attribute setter.
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_traceframe_info): Push trace state variables
present in the trace data into the traceframe info object.
* breakpoint.c (DEF_VEC_I): Remove.
* common/filestuff.c (DEF_VEC_I): Likewise.
* dwarf2loc.c (DEF_VEC_I): Likewise.
* mi/mi-main.c (DEF_VEC_I): Likewise.
* common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
* features/traceframe-info.dtd: Add tvar element and its
attributes.
* tracepoint.c (free_traceframe_info): Free vector 'tvars'.
(build_traceframe_info): Push trace state variables present in the
trace data into the traceframe info object.
(traceframe_info_start_tvar): New function.
(tvar_attributes): New.
(traceframe_info_children): Add "tvar" element.
* tracepoint.h (struct traceframe_info) <tvars>: New field.
* NEWS: Mention the change in GDB and GDBserver.
gdb/doc:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Traceframe Info Format): Document tvar element and
its attributes.
gdb/gdbserver:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* tracepoint.c (build_traceframe_info_xml): Output trace state
variables present in the trace buffer.
PR symtab/15391 is a failure with the DW_OP_GNU_implicit_pointer
feature.
I tracked it down to a logic error in read_pieced_value. The code
truncates this_size_bits according to the type size and offset too
early -- it should do it after taking bits_to_skip into account.
This patch fixes the bug.
While testing this, I also tripped across a latent bug because
indirect_pieced_value does not sign-extend where needed. This patch
fixes this bug as well.
Finally, Pedro pointed out that a previous version implemented sign
extension incorrectly. This version introduces a new gdb_sign_extend
function for this. A couple of notes on this function:
* It has the gdb_ prefix to avoid clashes with various libraries that
felt free to avoid proper namespacing. There is a "sign_extend"
function in a Tile GX header, in an SOM-related BFD header (and in
sh64-tdep.c and as a macro in arm-wince-tdep.c, but those are
ours...)
* I looked at all the sign extensions in gdb and didn't see ones that
I felt comfortable converting to use this function; in large part
because I don't have a good way to test the conversion.
Built and regtested on x86-64 Fedora 18. New test cases included;
this required a minor addition to the DWARF assembler. Note that the
DWARF CU made by implptrpiece.exp uses a funny pointer size in order
to show the sign-extension bug on all platforms.
* dwarf2loc.c (read_pieced_value): Truncate this_size_bits
after taking bits_to_skip into account. Sign extend byte_offset.
* utils.h (gdb_sign_extend): Declare.
* utils.c (gdb_sign_extend): New function.
* gdb.dwarf2/implptrpiece.exp: New file.
* gdb.dwarf2/implptrconst.exp (d): New variable.
Print d.
* lib/dwarf2.exp (Dwarf::_location): Handle DW_OP_piece.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
Hui Zhu <hui@codesourcery.com>
* dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
(dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
DW_OP_deref_size.
Fix entry-values in C++ across CUs.
* dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
lookup_minimal_symbol. Add a comment.
* dwarf2read.c
(read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
DW_AT_linkage_name.
gdb/testsuite/
Fix entry-values in C++ across CUs.
* gdb.arch/amd64-tailcall-cxx.exp: New file.
* gdb.arch/amd64-tailcall-cxx1.S: New file.
* gdb.arch/amd64-tailcall-cxx1.cc: New file.
* gdb.arch/amd64-tailcall-cxx2.S: New file.
* gdb.arch/amd64-tailcall-cxx2.cc: New file.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Gary Benson