Since getopt.h is provided by libiberty, there's no need to probe for
a system version of it. Plus we already assume it exists in other
parts of the sim.
Rather than hand duplicate the syscall constants, switch to the
common nltvals framework. I made sure the constants have the
same values before & after too :).
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
Rather than hand duplicate the syscall table, switch to the common
nltvals framework. We have to tweak the constant names, but we get
everything else for free. I made sure the constants have the same
values before & after too :).
This avoids duplicate tests for functions between common m4, arches,
and any other sources that would trigger func tests.
Also manually delete known duplicate function tests between the m4,
bfin, and v850 ports.
The printf fix uses our PRIxTA for our sim address type.
Then cast away the const (since the underlying code safely treats it
as such) even if it's ugly.
Finally touch up the argv iterator pointer to match the new func arg.
With this tidied up, we can delete the SIM_AC_OPTION_WARNINGS(no) call
to get the default common behavior where -Werror is enabled.
The printf fix is obvious enough, but the hash one is a real bug:
cr16/interp.c: In function 'sim_open':
cr16/interp.c:560:17: error: 'h' may be used uninitialized in this function [-Werror=maybe-uninitialized]
560 | h = h->next;
| ~~^~~~~~~~~
It happens to not cause a problem currently because the first entry in
the generated table that this loop operates matches a codepath where h
is initialized. Then when later entries don't match, the previous value
is pointing at the end of a valid hash table already, and the rest of
the code does nothing.
With this tidied up, we can delete the SIM_AC_OPTION_WARNINGS(no) call
to get the default common behavior where -Werror is enabled.
Add a READLINE_CFLAGS variable which adds the include path to the
in-tree readline when using the in-tree readline library.
sim/erc32/ChangeLog:
* Makefile.in (READLINE_SRC, READLINE_CFLAGS): Add.
(SIM_EXTRA_CFLAGS): Add READLINE_CFLAGS.
* configure: Rebuild.
* configure.ac (READLINE_CFLAGS): Add.
Only pass the top-level instruction decode table (mn10300.igen) to
igen via -i. The additional files passed previously caused igen to
exit its getopt loop in main and exit silently without generating any
output. In addition, when am33-2.igen was added, it was not included
from mn10300.igen, so was never used.
sim/mn10300/ChangeLog:
* Makefile.in: (tmp-igen) Only pass mn10300.igen to igen.
* mn10300.igen: Include am33-2.igen.
Explicitly use a known-good shell found by autoconf for executing
additional scripts in genmloop.sh rather than the building user's
shell.
sim/lm32/ChangeLog:
* Makefile.in: Pass -shell to genmloop.sh.
Claim that the accumulator indices are out of range without raising an
exception if the CPU doesn't support media instructions.
sim/frv/ChangeLog:
* traps.c (frvbf_check_acc_range): Add missing return value.
The bfin sim adds include paths for the SDL libraries. These include
paths might include headers for different version of binutils. Move
SIM_EXTRA_CFLAGS after CSEARCH to ensure local includes are always
preferred to external includes.
sim/common/ChangeLog:
* Make-common.in (CONFIG_CFLAGS): Remove SIM_EXTRA_CFLAGS.
(ALL_CLAGS, COMMON_DEP_CFLAGS): Add SIM_EXTRA_CFLAGS after
CSEARCH.
On a 32-bit build, I ran into the following:
sim/rx/fpu.c:789:6: error: "*((void *)&a+8)" may be used uninitialized in this function [-Werror=maybe-uninitialized]
rv = fp_implode (&a);
To silence this, just initialize the struct with 0's.
sim/rx/ChangeLog:
2021-04-09 Luis Machado <luis.machado@linaro.org>
* fpu.c (rxfp_itof): Initialize structure.
GCC gives a -Wsequence-point warning for this code in the h8300 sim.
The bug is that memory_size is both assigned and used in the same
expression. The fix is to assign after the print.
sim/h8300/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* compile.c (init_pointers): Fix sequence point warning.
This updates various parts of the sim to include missing system
headers. I made the includes unconditional, because other parts of
the tree are already doing this.
2021-04-08 Tom Tromey <tom@tromey.com>
* traps.c: Include stdlib.h.
* cris-tmpl.c: Include stdlib.h.
sim/erc32/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* func.c: Include sys/time.h.
sim/frv/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* traps.c: Include stdlib.h.
* registers.c: Include stdlib.h.
* profile.c: Include stdlib.h.
* memory.c: Include stdlib.h.
* interrupts.c: Include stdlib.h.
* frv.c: Include stdlib.h.
* cache.c: Include stdlib.h.
sim/iq2000/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* iq2000.c: Include stdlib.h.
sim/m32r/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* traps.c: Include stdlib.h.
* m32r.c: Include stdlib.h.
sim/ppc/ChangeLog
2021-04-08 Tom Tromey <tom@tromey.com>
* emul_unix.c: Include time.h.
I ran into a build failure with --enable-targets=all due to the fact that
the moxie sim expects to be able to use the dtc tool. If it isn't available,
the builds fails.
The following patch adds a prebuilt dtb file to the tree. That file is the one
that is used for installations.
The patch also enables (re-)generation of the dtb file through maintainer
mode, if it needs to be updated due to a change in the dts file.
Tested on aarch64-linux/x86_64-linux.
sim/moxie/ChangeLog:
2021-04-08 Luis Machado <luis.machado@linaro.org>
* Makefile.in (moxie-gdb.dtb): Add maintainer mode dependency.
(install-dtb): Install prebuilt dtb file.
* moxie-gdb.dtb: New prebuilt file.
The igen/dgen and opc2c tools leak their heap-allocated memory (on
purpose) at program exit, which makes AddressSanitizer fail the tool
execution. This breaks the build, as it makes the tool return a
non-zero exit code.
Fix that by disabling leak detection through the setting of that
environment variable.
I also changed the opc2c rules for m32c to go through a temporary file.
What happened is that the failing opc2c would produce an incomplete file
(probably because ASan exits the process before stdout is flushed).
This meant that further make attempts didn't try to re-create the file,
as it already existed. A "clean" was therefore necessary. This can
also happen in regular builds if the user interrupts the build (^C) in
the middle of the opc2c execution and tries to resume it. Going to a
temporary file avoids this issue.
sim/m32c/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running opc2c.
sim/mips/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/mn10300/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/ppc/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
sim/v850/ChangeLog:
* Makefile.in: Set ASAN_OPTIONS when running igen.
Change-Id: I00f21d4dc1aff0ef73471925d41ce7c23e83e082
Exit status 77 is common (including the autotools world) to indicate
"skip this test". Add support for mapping that to "unsupported" as
that's the closest in the dejagnu world.
If the port hasn't been enabled, don't try to run its tests. Making
this dynamic simplifies the test harnesses and avoids duplicating a
bunch of target tuple checks.
This fixes a problem that occurs when compiled by gcc-10, as the code
is relying on undefined overflow behavior. This is fixed by replacing
compares between 32-bit and 64-bit results with compares that just use
the 64-bit results with a cast.
PR sim/27483
* simulator.c (set_flags_for_add32): Compare uresult against
itself. Compare sresult against itself.
When building with AddressSanitizer, sim/m32c fails with:
./opc2c -l r8c.out /home/simark/src/binutils-gdb/sim/m32c/r8c.opc > r8c.c
sim_log: r8c.out
=================================================================
==3919390==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x7ffff7677459 in __interceptor_malloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55555555b3df in main /home/simark/src/binutils-gdb/sim/m32c/opc2c.c:658
#2 0x7ffff741fb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
Fix the leak in main by removing the vlist variable, which seems unused.
sim/erc32 uses an obsolete path to the in-tree build of readline.
readline was moved into a subdirectory some time ago. This patch
fixes the problem. Tested by rebuilding.
sim/erc32/ChangeLog
2021-04-05 Tom Tromey <tromey@adacore.com>
* configure: Rebuild.
* configure.ac (READLINE): Adjust in-tree value.
sim/mips/ChangeLog
* interp.c (sim_monitor): Add switch entries for unlink (13),
lseek (14), and stat (15).
Derived from patch authored by Steve Ellcey <sellcey@mips.com>
Provide a simple example simulator for people porting to new targets
to use as a reference. This one has the advantage of being used by
people and having a fun program available for it.
It doesn't require a special target -- the example simulators can be
built for any existing port.
Now that we have the common automake build with support for build-time
programs working, we can integrate the common tests into the default
`make check` flow.
This doesn't actually create one `run` program like other projects,
but creates multiple `run-$arch` targets. While it might not seem
that useful initially, this has some nice properties:
- Allows us to quickly build all sim targets in a single tree.
- Positions us better for converting targets over to a proper
multitarget build+install.
We don't have the ability to actually run tests against them, but
that's due to a limitation in gas: it doesn't support multitarget.
If that ever changes, we should be able to turn on our tests too.
We can improve the test framework to fallback to a system toolchain
if available to help mitigate that.
This simplifies the build a bit (especially for deps in port subdirs),
and avoids recursive make. This in turn speeds up the build, and sets
us up for multi-target.
I see the following error for --target=microblaze-elf:
../../../sim/microblaze/interp.c: In function 'sim_engine_run':
../../../sim/microblaze/interp.c:147:39: error: passing argument 2 of 'get_insn_microblaze' from incompatible pointer type [-Werror=incompatible-pointer-types]
147 | op = get_insn_microblaze (inst, &imm_unsigned, &insn_type,
| ^~~~~~~~~~~~~
| |
| int *
In file included from ../../bfd/bfd.h:45,
from ../../../sim/microblaze/interp.c:24:
../../../sim/microblaze/../../opcodes/microblaze-dis.h:34:57: note: expected '_Bool *' but argument is of type 'int *'
34 | extern enum microblaze_instr get_insn_microblaze (long, bool *,
| ^
sim/microblaze/ChangeLog:
* interp.c (sim_engine_run): Use bool instead of int.
These use the same pattern as seen in the opcodes/ dir and in automake
in general (ish). This helps simplify the boilerplate for building and
linking build-time code, and fixes some inconsistency in flag usage.
For rules that were compiling+linking in a single step, split them into
separate steps so we can apply the correct set of options. This matches
automake behavior too.
The sim's recently switch to using Automake caused a build failure for
me, because I didn't have the correct auto* tools in my path.
However, the rule in the tree is that this is not needed in general.
This patch adds a call to AM_MAINTAINER_MODE, to align the sim with
the way the rest of the tree works here.
sim/ChangeLog
2021-03-08 Tom Tromey <tromey@adacore.com>
* aclocal.m4, configure, Makefile.in: Rebuild.
* configure.ac: Use AM_MAINTAINER_MODE.
This hasn't been initialized anywhere for years. It used to be for
passing in the path to libiberty, but that stopped happening long ago.
Delete it to simplify the build logic.
This local macro doesn't take any args, so adjust the API to match.
No one really noticed as this is behind code that is not normally
built, only when a dev specifically tries to compile it.
While the configure script was checking for a bunch of headers, only
one of them was conditionally included in the source (unistd.h). The
rest were always included. Based on those usage this whole time, we
can reasonably assume that the build also has unistd.h.
All the other files including config.h never actually used any defines
from the header.
