This is a follow-up of:
https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html
Instead of going throttle and always enabling our selftests (even in
non-development builds), this patch is a bit more conservative and
introduces a configure option ("--enable-unit-tests") that allows the
user to choose whether she wants unit tests in the build or not. Note
that the current behaviour is retained: if no option is provided, GDB
will have selftests included in a development build, and will *not*
have selftests included in a non-development build.
The rationale for having this option is still the same: due to the
many racy testcases and random failures we see when running the GDB
testsuite, it is unfortunately not possible to perform a full test
when one is building a downstream package. As the Fedora GDB
maintainer and one of the Debian GDB uploaders, I feel like this
situation could be improved by, at least, executing our selftests
after the package has been built.
This patch introduces no regressions to our build.
OK?
gdb/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simark@simark.ca>
* README (`configure' options): Add documentation for new
"--enable-unit-tests" option.
* acinclude.m4: Include "selftest.m4".
* configure: Regenerate.
* configure.ac: Use "GDB_AC_SELFTEST".
* maint.c (maintenance_selftest): Update message informing
that selftests have been disabled.
(maintenance_info_selftests): Likewise.
* selftest.m4: New file.
gdb/gdbserver/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simark@simark.ca>
* acinclude.m4: Include "../selftest.m4".
* configure: Regenerate.
* configure.ac: Use "GDB_AC_SELFTEST".
* configure.srv: Use "$enable_unittests" instead of
"$development" when checking whether unit tests have been
enabled.
* server.c (captured_main): Update message informing that
selftests have been disabled.
gdb/testsuite/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.gdb/unittest.exp: Update expected message informing that
selftests have been disabled.
* gdb.server/unittest.exp: Likewise.
squash! Add parameter to allow enabling/disabling selftests via configure
This fixes a few instances of shadowing in gdbserver. These are all
simple fixes.
gdb/gdbserver/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* server.c (handle_status): Rename inner "thread".
(process_serial_event): Declare "res" in 'm' case.
* linux-low.c (last_thread_of_process_p, find_lwp_pid)
(iterate_over_lwps): Rename inner "thread".
(linux_qxfer_libraries_svr4): Rename inner "len".
* gdbthread.h (find_thread_in_random): Rename inner "thread".
We start from a process_info pointer, pass down process->pid, and
then the target_kill implementations need to find the process from the
pid again. Pass the process_info pointer down directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill): Change parameter to process_info
pointer instead of pid. Adjust.
* lynx-low.c (lynx_kill): Likewise.
* nto-low.c (nto_kill): Likewise.
* spu-low.c (spu_kill): Likewise.
* win32-low.c (win32_kill): Likewise.
* server.c (handle_v_kill, kill_inferior_callback)
(detach_or_kill_for_exit): Adjust.
* target.c (kill_inferior): Change parameter to process_info
pointer instead of pid. Adjust.
* target.h (struct target_ops) <kill>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(kill_inferior): Likewise.
We start from a process_info pointer, pass down process->pid, and then
the target_detach and target_join implementations need to find the
process from the pid again. Pass the process_info pointer down
directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_detach, linux_join): Change parameter to
process_info pointer instead of pid. Adjust.
* lynx-low.c (lynx_detach, lynx_join): Likewise.
* nto-low.c (nto_detach): Likewise.
* spu-low.c (spu_detach, spu_join): Likewise.
* win32-low.c (win32_detach, win32_join): Likewise.
* server.c (handle_detach, detach_or_kill_for_exit): Adjust.
* target.h (struct target_ops) <detach, join>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(detach_inferior, join_inferior): Rename 'pid' parameter to
'proc'.
This fixes a gdb.base/multi-forks.exp regression with GDBserver.
Git commit f2ffa92bbc ("gdb: Eliminate the 'stop_pc' global") caused
the regression by exposing a latent bug in gdbserver.
The bug is that GDBserver's implementation of the D;PID packet
incorrectly assumes that the selected thread points to the process
being detached. This happens via the any_persistent_commands call,
which calls current_process:
(gdb) bt
#0 0x000000000040a57e in internal_error(char const*, int, char const*, ...)
(file=0x4a53c0 "src/gdb/gdbserver/inferiors.c", line=212, fmt=0x4a539e "%s:
Assertion `%s' failed.") at src/gdb/gdbserver/../common/errors.c:54
#1 0x0000000000420acf in current_process() () at
src/gdb/gdbserver/inferiors.c:212
#2 0x00000000004226a0 in any_persistent_commands() () at
gdb/gdbserver/mem-break.c:308
#3 0x000000000042cb43 in handle_detach(char*) (own_buf=0x6f0280 "D;62ea") at
src/gdb/gdbserver/server.c:1210
#4 0x0000000000433af3 in process_serial_event() () at
src/gdb/gdbserver/server.c:4055
#5 0x0000000000434878 in handle_serial_event(int, void*) (err=0,
client_data=0x0)
The "eliminate stop_pc" commit exposes the problem because before that
commit, GDB's switch_to_thread always read the newly-selected thread's
PC, and that would end up forcing GDBserver's selected thread to
change accordingly as side effect. After that commit, GDB no longer
reads the thread's PC, and GDBserver does not switch the thread.
Fix this by removing the assumption from GDBserver.
gdb/gdbserver/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
PR gdb/23377
* mem-break.c (any_persistent_commands): Add process_info
parameter and use it instead of relying on the current process.
Change return type to bool.
* mem-break.h (any_persistent_commands): Add process_info
parameter and change return type to bool.
* server.c (handle_detach): Remove require_running_or_return call.
Look up the process_info for the process we're about to detach.
If not found, return back error to GDB. Adjust
any_persistent_commands call to pass down a process pointer.
Collect per client specific global data items into struct client_state,
which is similar in purpose to remote.c::remote_state.
gdbserver/ChangeLog
* server.h (struct client_state): New.
* server.c (cont_thread, general_thread, multi_process)
(report_fork_events, report_vfork_events, report_exec_events)
(report_thread_events, swbreak_feature, hwbreak_feature)
(vCont_supported, disable_randomization, pass_signals)
(program_signals, program_signals_p, last_status, last_ptid, own_buf):
Moved to client_state.
* remote-utils.c (remote_debug, noack_mode)
(transport_is_reliable): Moved to client_state.
* tracepoint.c (current_traceframe): Moved to client_state.
Update all callers.
* server.c, remote-utils.c, tracepoint.c, fork-child.c,
linux-low.c, remote-utils.h, target.c: Use client_state.
Add a print_xml_feature visitor class which turns a
target description into xml. Both gdb and gdbserver can do this.
gdb/
* common/tdesc.c (print_xml_feature::visit_pre): Add xml parsing.
(print_xml_feature::visit_post): Likewise.
(print_xml_feature::visit): Likewise.
* common/tdesc.h (tdesc_get_features_xml): Use const tdesc.
(print_xml_feature): Add new class.
* regformats/regdat.sh: Null xmltarget on feature targets.
* target-descriptions.c (struct target_desc): Add xmltarget.
(maintenance_check_tdesc_xml_convert): Add unittest function.
(tdesc_get_features_xml): Add function to get xml.
(maintenance_check_xml_descriptions): Test xml generation.
* xml-tdesc.c (string_read_description_xml): Add function.
* xml-tdesc.h (string_read_description_xml): Add declaration.
gdbserver/
* gdb/gdbserver/server.c (get_features_xml): Remove cast.
* tdesc.c (void target_desc::accept): Fill in function.
(tdesc_get_features_xml): Remove old xml creation.
(print_xml_feature::visit_pre): Add xml vistor.
* tdesc.h (struct target_desc): Make xmltarget mutable.
(tdesc_get_features_xml): Remove declaration.
Unless I'm missing something very obvious, this xstrdup seems
unnecessary to me. We can pass "mode" directly to sprintf.
gdb/gdbserver/ChangeLog:
* server.c (handle_general_set): Remove unnecessary xstrdup.
This patch makes delim_string_to_char_ptr_vec and all related functions
use std::vector of gdb::unique_xmalloc_ptr. This allows getting rid of
make_cleanup_free_char_ptr_vec. Returning a vector of
unique_xmalloc_ptr instead of std::string allows to minimize the impacts
on the calling code. We can evaluate later whether we could/should
return a vector of std::strings instead.
gdb/ChangeLog:
* common/gdb_vecs.h (make_cleanup_free_char_ptr_vec): Remove.
(delim_string_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec_append): Take std::vector of
gdb::unique_xmalloc_ptr.
(dirnames_to_char_ptr_vec): Return std::vector of
gdb::unique_xmalloc_ptr.
* common/gdb_vecs.c (delim_string_to_char_ptr_vec_append):
Take std::vector of gdb::unique_xmalloc_ptr, adjust the code.
(delim_string_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec_append): Take an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(dirnames_to_char_ptr_vec): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
* auto-load.c (auto_load_safe_path_vec): Change type to
std::vector of gdb::unique_xmalloc_ptr.
(auto_load_expand_dir_vars): Return an std::vector of
gdb::unique_xmalloc_ptr, adjust the code.
(auto_load_safe_path_vec_update): Adjust.
(filename_is_in_auto_load_safe_path_vec): Adjust.
(auto_load_objfile_script_1): Adjust.
* build-id.c (build_id_to_debug_bfd): Adjust.
* linux-thread-db.c (thread_db_load_search): Adjust.
* source.c (add_path): Adjust.
(openp): Adjust.
* symfile.c (find_separate_debug_file): Adjust.
* utils.c (do_free_char_ptr_vec): Remove.
(make_cleanup_free_char_ptr_vec): Remove.
gdb/gdbserver/ChangeLog:
* server.c (parse_debug_format_options): Adjust to
delim_string_to_char_ptr_vec changes.
* thread-db.c (thread_db_load_search): Adjust to
dirnames_to_char_ptr_vec changes.
By removing the supports_btrace gdbserver target method we relied on GDB
trying to enable branch tracing and failing on the attempt.
For targets that do not provide the btrace methods, however, an initial
request from GDB for the branch trace configuration to detect whether
gdbserver is already recording resulted in a protocol error.
Have the btrace target methods throw a "Target does not suppor branch
tracing" error and be prepared to handle exceptions in all functions that
call btrace target methods. We therefore turn the target_* macros into
static inline functions.
Also remove the additional btrace target method checks that resulted in
the above protocol error.
Thanks to Maciej W. Rozycki <macro@mips.com> for reporting this.
gdbserver/
* target.h (target_enable_btrace, target_disable_btrace)
(target_read_btrace, target_read_btrace_conf): Turn macro into
inline function. Throw error if target method is not defined.
* server.c (handle_qxfer_btrace, handle_qxfer_btrace_conf): Remove
check for btrace target method. Be prepared to handle exceptions
from btrace target methods.
I forgot to address Pedro's comment about my last patch and change the
order of the message printed when getcwd returns NULL on gdbserver.
This obvious commit does it.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (captured_main): Change order of error message printed
when the current working directory cannot be found.
Simon mentioned on IRC that, after the startup-with-shell feature has
been implemented on gdbserver, it is not possible to specify a
filename-only binary, like:
$ gdbserver :1234 a.out
/bin/bash: line 0: exec: a.out: not found
During startup program exited with code 127.
Exiting
This happens on systems where the current directory "." is not listed
in the PATH environment variable. Although including "." in the PATH
variable is a possible workaround, this can be considered a regression
because before startup-with-shell it was possible to use only the
filename (due to reason that gdbserver used "exec*" directly).
The idea of the patch is to verify if the program path provided by the
user (or by the remote protocol) contains a directory separator
character. If it doesn't, it means we're dealing with a filename-only
binary, so we call "gdb_abspath" to properly expand it and transform
it into a full path. Otherwise, we leave the program path untouched.
This mimicks the behaviour seen on GDB (look at "openp" and
"attach_inferior", for example).
I am also submitting a testcase which exercises the scenario described
above. This test requires gdbserver to be executed in a different CWD
than the original, so I also created a helper function, "with_cwd" (on
testsuite/lib/gdb.exp), which takes care of cd'ing into and out of the
specified dir.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simon.marchi@polymtl.ca>
* common/common-utils.c: Include "sys/stat.h".
(is_regular_file): Move here from "source.c"; change return
type to "bool".
* common/common-utils.h (is_regular_file): New prototype.
* common/pathstuff.c (contains_dir_separator): New function.
* common/pathstuff.h (contains_dir_separator): New prototype.
* source.c: Don't include "sys/stat.h".
(is_regular_file): Move to "common/common-utils.c".
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include "filenames.h" and "pathstuff.h".
(program_name): Delete variable.
(program_path): New anonymous class.
(get_exec_wrapper): Use "program_path" instead of
"program_name".
(handle_v_run): Likewise.
(captured_main): Likewise.
(process_serial_event): Likewise.
gdb/testsuite/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/abspath.exp: New file.
* lib/gdb.exp (with_cwd): New procedure.
This commit moves the path manipulation routines found on utils.c to a
new common/pathstuff.c, and updates the Makefile.in's accordingly.
The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and
"gdb_abspath".
This will be needed because gdbserver will have to call "gdb_abspath"
on my next patch, which implements a way to expand the path of the
inferior provided by the user in order to allow specifying just the
binary name when starting gdbserver, like:
$ gdbserver :1234 a.out
With the recent addition of the startup-with-shell feature on
gdbserver, this scenario doesn't work anymore if the user doesn't have
the current directory listed in the PATH variable.
I had to do a minor adjustment on "gdb_abspath" because we don't have
access to "tilde_expand" on gdbserver, so now the function is using
"gdb_tilde_expand" instead. Otherwise, the code is the same.
Regression tested on the BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
(HFILES_NO_SRCDIR): Add "common/pathstuff.h".
* auto-load.c: Include "common/pathstuff.h".
* common/common-def.h (current_directory): Move here.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
function.
* common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
prototype.
* common/pathstuff.c: New file.
* common/pathstuff.h: New file.
* compile/compile.c: Include "common/pathstuff.h".
* defs.h (current_directory): Move to "common/common-defs.h".
* dwarf2read.c: Include "common/pathstuff.h".
* exec.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* linux-thread-db.c: Likewise.
* main.c: Likewise.
* nto-tdep.c: Likewise.
* objfiles.c: Likewise.
* source.c: Likewise.
* symtab.c: Likewise.
* utils.c: Include "common/pathstuff.h".
(gdb_realpath): Move to "common/pathstuff.c".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
* utils.h (gdb_realpath): Move to "common/pathstuff.h".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c".
(OBJS): Add "pathstuff.o".
* server.c (current_directory): New global variable.
(captured_main): Initialize "current_directory".
Remove the to_supports_btrace target method and instead rely on detecting errors
when trying to enable recording. This will also provide a suitable error
message explaining why recording is not possible.
For remote debugging, gdbserver will now always advertise branch tracing related
packets. When talking to an older GDB, this will cause GDB to try to enable
branch tracing and gdbserver to report a suitable error message every time.
An older gdbserver will not advertise branch tracing related packets if the
one-time check failed, so a newer GDB with this patch will fail to enable branch
tracing at remote_enable_btrace() rather than at btrace_enable(). The error
message is the same in both cases so there should be no user-visible change.
gdb/
* btrace.c (btrace_enable): Remove target_supports_btrace call.
* nat/linux-btrace.c (perf_event_pt_event_type): Move.
(kernel_supports_bts, kernel_supports_pt, linux_supports_bts)
(linux_supports_pt, linux_supports_btrace): Remove.
(linux_enable_bts): Call cpu_supports_bts.
* nat/linux-btrace.h (linux_supports_btrace): Remove.
* remote.c (remote_supports_btrace): Remove.
(init_remote_ops): Remove remote_supports_btrace.
* target-delegates.c: Regenerated.
* target.c (target_supports_btrace): Remove.
* target.h (target_ops) <to_supports_btrace>: Remove
(target_supports_btrace): Remove.
* x86-linux-nat.c (x86_linux_create_target): Remove
linux_supports_btrace.
gdbserver/
* linux-low.c (linux_target_ops): Remove linux_supports_btrace.
* nto-low.c (nto_target_ops): Remove NULL for supports_btrace.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* server.c (supported_btrace_packets): Report packets unconditionally.
* target.h (target_ops) <supports_btrace>: Remove.
(target_supports_btrace): Remove.
Change error reporting to use exceptions and be prepared to catch them in
gdbserver. We use the exception message in our error reply to GDB.
This may remove some detail from the error message in the native case since
errno is no longer printed. Later patches will improve that.
We're still using error strings on the RSP level. This patch does not affect
the interoperability of older/newer GDB/gdbserver.
gdbserver/
* server.c (handle_btrace_enable_bts, handle_btrace_enable_pt)
(handle_btrace_disable): Change return type to void. Use exceptions
to report errors.
(handle_btrace_general_set): Catch exception and copy message to
return message.
gdb/
* nat/linux-btrace.c (linux_enable_btrace): Throw exception if enabling
btrace failed.
* x86-linux-nat.c (x86_linux_enable_btrace): Catch btrace enabling
exception and use message in own exception.
When we set bfd/development.sh:$development to false, GDBserver failed to
build,
selftest.o: In function `selftests::run_tests(char const*)':
binutils-gdb/gdb/gdbserver/../common/selftest.c:97:undefined reference to `selftests::reset()'
collect2: error: ld returned 1 exit status
selftest.o shouldn't be compiled and linked when $development is false.
With this patch, in release mode, GDBserver doesn't nothing with option
--selftest,
$ ./gdbserver --selftest=foo
Selftests are not available in a non-development build.
$ ./gdbserver --selftest
Selftests are not available in a non-development build.
gdb/gdbserver:
2018-01-08 Yao Qi <yao.qi@linaro.org>
Simon Marchi <simon.marchi@ericsson.com>
* Makefile.in (OBS): Remove selftest.o.
* configure.ac: Set srv_selftest_objs if $development is true.
(GDBSERVER_DEPFILES): Append $srv_selftest_objs.
* configure: Re-generated.
* server.c (captured_main): Wrap variable selftest_filter with
GDB_SELF_TEST.
gdb/testsuite:
2018-01-08 Simon Marchi <simon.marchi@ericsson.com>
* gdb.server/unittest.exp: Match the output in non-development
mode.
This avoid having to manually free the return value.
gdb/gdbserver/ChangeLog:
* server.c (parse_debug_format_options): Return std::string.
(handle_monitor_command, captured_main): Adjust.
At https://sourceware.org/bugzilla/show_bug.cgi?id=18653#c7, Andrew
reports that the fix for PR gdb/18653 made GDB useless if you preload
libSegFault.so, because GDB internal-errors on startup:
$ LD_PRELOAD=libSegFault.so gdb
src/gdb/common/signals-state-save-restore.c:64: internal-error: unexpected signal handler
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Aborted (core dumped)
$
The internal error comes from the code saving the signal dispositions
inherited from gdb's parent:
(top-gdb) bt
#0 0x000000000056b001 in internal_error(char const*, int, char const*, ...) (file=0xaf5f38 "src/gdb/common/signals-state-save-restore.c", line=64, fmt=0xaf5f18 "unexpected signal handler") at src/gdb/common/errors.c:54
#1 0x00000000005752c9 in save_original_signals_state() () at src/gdb/common/signals-state-save-restore.c:64
#2 0x00000000007425de in captured_main_1(captured_main_args*) (context=0x7fffffffd860)
at src/gdb/main.c:509
#3 0x0000000000743622 in captured_main(void*) (data=0x7fffffffd860) at src/gdb/main.c:1145
During symbol reading, cannot get low and high bounds for subprogram DIE at 24065.
#4 0x00000000007436f9 in gdb_main(captured_main_args*) (args=0x7fffffffd860) at src/gdb/main.c:1171
#5 0x0000000000413acd in main(int, char**) (argc=1, argv=0x7fffffffd968) at src/gdb/gdb.c:32
This commit downgrades the internal error to a warning. You'll get
instead:
~~~
$ LD_PRELOAD=libSegFault.so gdb
warning: Found custom handler for signal 11 (Segmentation fault) preinstalled.
Some signal dispositions inherited from the environment (SIG_DFL/SIG_IGN)
won't be propagated to spawned programs.
GNU gdb (GDB) 8.0.50.20171213-git
Copyright (C) 2017 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
(gdb)
~~~
This also moves the location where save_original_signals_state is
called a bit further below (to after option processing), so that "-q"
disables the warning:
~~~
$ LD_PRELOAD=libSegFault.so gdb -q
(gdb)
~~~
New testcase included.
gdb/ChangeLog:
2018-01-05 Pedro Alves <palves@redhat.com>
PR gdb/18653
* common/signals-state-save-restore.c
(save_original_signals_state): New parameter 'quiet'. Warn if we
find a custom handler preinstalled, instead of internal erroring.
But only warn if !quiet.
* common/signals-state-save-restore.h
(save_original_signals_state): New parameter 'quiet'.
* main.c (captured_main_1): Move save_original_signals_state call
after option handling, and pass QUIET.
gdb/gdbserver/ChangeLog:
2018-01-05 Pedro Alves <palves@redhat.com>
PR gdb/18653
* server.c (captured_main): Pass quiet=false to
save_original_signals_state.
gdb/testsuite/ChangeLog:
2018-01-05 Pedro Alves <palves@redhat.com>
PR gdb/18653
* gdb.base/libsegfault.exp: New.
gdb/ChangeLog:
* top.c (print_gdb_version): Update Copyright year in version
message.
gdb/gdbserver/ChangeLog:
* gdbreplay.c (gdbreplay_version): Update copyright year in
version message.
* server.c (gdbserver_version): Likewise.
This patch makes the syscalls_to_catch field of process_info an
std::vector<int>. The process_info structure must now be
newed/deleted.
In handle_extended_wait, the code that handles exec events destroys the
existing process_info and creates a new one. It moves the content of
syscalls_to_catch from the old to the new vector. I used std::move for
that (through an intermediary variable), which should have the same
behavior as the old code.
gdb/gdbserver/ChangeLog:
* inferiors.h (struct process_info): Add constructor, initialize
fields..
<syscalls_to_catch>: Change type to std::vector<int>.
* inferiors.c (add_process): Allocate process_info with new.
(remove_process): Free process_info with delete.
* linux-low.c (handle_extended_wait): Adjust.
(gdb_catching_syscalls_p, gdb_catch_this_syscall_p): Adjust.
* server.c (handle_general_set): Adjust.
Change find_inferior with find_thread. Since we can now pass arguments
directly instead of through a void pointer, we don't need the
visit_actioned_threads_data structure anymore.
gdb/gdbserver/ChangeLog:
* server.c (struct visit_actioned_threads_data): Remove.
(visit_actioned_threads): Change prototype to take arguments
directly.
(resume): Use find_thread instead of find_inferior.
Replace one with find_thread, the other with for_each_thread.
gdb/gdbserver/ChangeLog:
* server.c (queue_stop_reply_callback): Change prototype, return
void.
(find_status_pending_thread_callback): Remove.
(handle_status): Replace find_inferior with find_thread and
for_each_thread.
Remove the usage of inferior_list for the all_threads list in
gdbserver. The entry field in thread_info is removed, and replaced by a
simple ptid field.
I added some functions to iterate (for_each_thread) and find threads
(find_thread). However, changing all the users of find_inferior & co to
use these new functions would have made the patch way too big. So I
opted instead to make find_inferior & co some shims, so that the
existing code only needs to be updated minimally. We can then update
the existing code to use the new functions incrementally (I've started
to do the work, but I'll post it afterwards, see [1] if you want a peek).
This patch has been built-tested on all relevant platforms, except
lynx. I also regtested using the native-gdbserver and
native-extended-gdbserver boards on x86.
[1] https://github.com/simark/binutils-gdb/commits/kill-inferior-list-entry
gdb/gdbserver/ChangeLog:
* inferiors.h: (struct inferior_list): Remove.
(struct inferior_list_entry); Remove.
(add_inferior_to_list, clear_inferior_list, one_inferior_p,
A_I_NEXT, ALL_INFERIORS_TYPE, ALL_INFERIORS, remove_inferior,
get_first_inferior): Remove.
(for_each_inferior, for_each_inferior_with_data, find_inferior,
find_inferior_id, find_inferior_in_random): Change signature.
* inferiors.c (all_threads): Change type to
std::list<thread_info *>.
(get_thread): Remove macro.
(find_inferior, find_inferior_id): Change signature, implement
using find_thread.
(find_inferior_in_random): Change signature, implement using
find_thread_in_random.
(for_each_inferior, for_each_inferior_with_data): Change
signature, implement using for_each_thread.
(add_inferior_to_list, remove_inferior): Remove.
(add_thread, get_first_thread, thread_of_pid,
find_any_thread_of_pid, free_one_thread, remove_thread): Update.
(get_first_inferior, one_inferior_p, clear_inferior_list):
Remove.
(clear_inferiors, get_thread_process): Update.
* gdbthread.h: Include <list>.
(struct thread_info) <entry>: Remove field.
<id>: New field.
(all_threads): Change type to std::list<thread_info *>.
(get_first_inferior): Add doc.
(find_thread, for_each_thread, find_thread_in_random): New
functions.
(current_ptid, pid_of, ptid_of, lwpid_of): Update.
* linux-arm-low.c (update_registers_callback): Update.
* linux-low.c (second_thread_of_pid_p): Update.
(kill_one_lwp_callback, linux_detach_lwp_callback,
delete_lwp_callback, status_pending_p_callback, same_lwp,
find_lwp_pid, num_lwps, iterate_over_lwps_filter,
iterate_over_lwps, not_stopped_callback,
resume_stopped_resumed_lwps, count_events_callback,
select_singlestep_lwp_callback, select_event_lwp_callback,
unsuspend_one_lwp, linux_wait_1, send_sigstop_callback,
suspend_and_send_sigstop_callback, wait_for_sigstop,
stuck_in_jump_pad_callback, move_out_of_jump_pad_callback,
lwp_running, linux_set_resume_request, resume_status_pending_p,
need_step_over_p, start_step_over, linux_resume_one_thread,
proceed_one_lwp, unsuspend_and_proceed_one_lwp,
reset_lwp_ptrace_options_callback): Update.
* linux-mips-low.c (update_watch_registers_callback): Update.
* regcache.c (regcache_invalidate_one, regcache_invalidate):
Update.
(free_register_cache_thread_one): Remove.
(regcache_release): Update.
* server.c (handle_btrace_enable_bts, handle_btrace_enable_pt,
handle_qxfer_threads_worker): Update.
(handle_query): Update, use list iterator.
(visit_actioned_threads, handle_pending_status,
queue_stop_reply_callback, gdb_wants_all_threads_stopped,
clear_pending_status_callback, set_pending_status_callback,
find_status_pending_thread_callback, handle_status,
process_serial_event): Update.
* target.c (thread_search_callback): Update.
* thread-db.c (thread_db_get_tls_address): Update.
* tracepoint.c (tracepoint_finished_step, tracepoint_was_hit):
Update.
* win32-i386-low.c (update_debug_registers_callback): Update.
* win32-low.c (delete_thread_info, child_delete_thread,
continue_one_thread, suspend_one_thread,
get_child_debug_event): Adjust.
Remove the usage of inferior_list for the all_processes list in
gdbserver, replace it with an std::list. The entry field in process_info
is removed, and replaced by a simple pid field.
The pid_of macro, used for both processes and threads, is replaced with
separate functions. For completeness, I changed ptid_of and lwpid_of to
functions as well.
gdb/gdbserver/ChangeLog:
* gdbthread.h (ptid_of, pid_of, lwpid_of): New functions.
* inferiors.h: Include <list>.
(struct process_info) <entry>: Remove field.
<pid>: New field.
(pid_of): Change macro to function.
(ptid_of, lwpid_of): Remove macro.
(all_processes): Change type to std::list<process_info *>.
(ALL_PROCESSES): Remove macro.
(for_each_process, find_process): New function.
* inferiors.c (all_processes): Change type to
std::list<process_info *>.
(find_thread_process): Adjust.
(add_process): Likewise.
(remove_process): Likewise.
(find_process_pid): Likewise.
(get_first_process): Likewise.
(started_inferior_callback): Remove.
(have_started_inferiors_p): Adjust.
(attached_inferior_callback): Remove.
(have_attached_inferiors_p): Adjust.
* linux-low.c (check_zombie_leaders): Likewise.
* linux-x86-low.c (x86_arch_setup_process_callback): Remove.
(x86_linux_update_xmltarget): Adjust.
* server.c (handle_query): Likewise.
(gdb_reattached_process): Remove.
(handle_status): Adjust.
(kill_inferior_callback): Likewise.
(detach_or_kill_inferior): Remove.
(print_started_pid): Likewise.
(print_attached_pid): Likewise.
(detach_or_kill_for_exit): Update.
(process_serial_event): Likewise.
* linux-arm-low.c (arm_new_fork): Likewise.
As a small step towards removing inferior_list/inferior_list_entry, this
patch replaces the usage of inferior_list for the list of dlls by an
std::list. The dll_info type now uses an std::string for name and has a
simple constructor.
I am able to build gdbserver with mingw on Linux, but I am not able to
test this on a Windows machine (the only platform that uses this code).
gdb/gdbserver/ChangeLog:
* dll.h: Include <list>.
(struct dll_info): Add constructor.
<entry>: Remove field.
(all_dlls): Change type to std::list<dll_info>.
* dll.c: Include <algorithm>.
(get_dll): Remove macro.
(all_dlls): Change type to std::list<dll_info *>.
(free_one_dll): Remove.
(match_dll): Likewise.
(loaded_dll): Adjust.
(unloaded_dll): Adjust to all_dlls type change, use
std::find_if. Inline code from match_dll.
(clear_dlls): Adjust to all_dlls type change.
* server.c (emit_dll_description): Remove.
(handle_qxfer_libraries): Adjust to all_dlls type change,
integrate emit_dll_description's functionality.
This is the "natural" extension necessary for the "set cwd" command
(and the whole "set the inferior's cwd" logic) to work on gdbserver.
The idea here is to have a new remote packet, QSetWorkingDir (name
adopted from LLDB's extension to the RSP, as can be seen at
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>),
which sends an hex-encoded string representing the working directory
that the remote inferior will use. There is a slight difference from
the packet proposed by LLDB: GDB's version will accept empty
arguments, meaning that the user wants to clear the previously set
working directory for the inferior (i.e., "set cwd" without arguments
on GDB).
For UNIX-like targets this feature is already implemented on
nat/fork-inferior.c, and all gdbserver has to do is to basically
implement "set_inferior_cwd" and call it whenever such packet arrives.
For other targets, like Windows, it is possible to use the existing
"get_inferior_cwd" function and do the necessary steps to make sure
that the inferior will use the specified working directory.
Aside from that, the patch consists basically of updates to the
testcase (making it available on remote targets) and the
documentation.
No regressions found.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry about new
'set-cwd-on-gdbserver' feature.
(New remote packets): Add entry for QSetWorkingDir.
* common/common-inferior.h (set_inferior_cwd): New prototype.
* infcmd.c (set_inferior_cwd): Remove "static".
(show_cwd_command): Expand text to include remote debugging.
* remote.c: Add PACKET_QSetWorkingDir.
(remote_protocol_features) <QSetWorkingDir>: New entry for
PACKET_QSetWorkingDir.
(extended_remote_set_inferior_cwd): New function.
(extended_remote_create_inferior): Call
"extended_remote_set_inferior_cwd".
(_initialize_remote): Call "add_packet_config_cmd" for
QSetWorkingDir.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (set_inferior_cwd): New function.
* server.c (handle_general_set): Handle QSetWorkingDir packet.
(handle_query): Inform that QSetWorkingDir is supported.
* win32-low.c (create_process): Pass the inferior's cwd to
CreateProcess.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.exp: Make it available on
native-extended-gdbserver.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention remote debugging.
(Working Directory) <Your Program's Working Directory>:
Likewise.
(Connecting) <Remote Packet>: Add "set-working-dir"
and "QSetWorkingDir" to the table.
(Remote Protocol) <QSetWorkingDir>: New item, explaining the
packet.
This patch adds support to remote targets for converting a thread
handle to a thread_info struct pointer.
A thread handle is fetched via a "handle" attribute which has been
added to the qXfer:threads:read query packet. An implementation is
provided in gdbserver for targets using the Linux kernel.
gdb/gdbserver/ChangeLog:
* linux-low.h (struct lwp_info): Add new field, thread_handle.
(thread_db_thread_handle): Declare.
* linux-low.c (linux_target_ops): Initialize thread_handle.
* server.c (handle_qxfer_threads_worker): Add support for
"handle" attribute.
* target.h (struct target_ops): Add new function pointer,
thread_handle.
(target_thread_handle): Define.
* thread-db.c (find_one_thread, attach_thread): Set thread_handle
field in lwp.
(thread_db_thread_handle): New function.
gdb/ChangeLog:
* remote.c (vector): Include.
(struct private_thread_info): Add field, thread_handle.
(free_private_thread_info): Deallocate storage associated with
thread handle.
(get_private_info_thread): Initialize `thread_handle' field.
(struct thread_item): Add field, thread_handle.
(clear_threads_listing_context): Deallocate storage associated
with thread handle.
(start_thread): Add support for "handle" attribute.
(thread_attributes): Add "handle".
(remote_get_threads_with_qthreadinfo): Initialize thread_handle
field.
(remote_update_thread_list): Update thread_handle.
(remote_thread_handle_to_thread_info): New function.
(init_remote_ops): Initialize to_thread_handle_to_thread_info.
Back in commit f0db101d98 ("gdbserver: don't pick a random thread if
the current thread dies"), a couple years ago, the last references to
set_desired_thread(0) [select the Hc thread] were removed, and all the
remaining calls to set_desired_thread pass '1', meaning general
thread. This means we can simplify set_desired_thread.
gdb/gdbserver/ChangeLog:
2017-09-21 Pedro Alves <palves@redhat.com>
* server.c (gdb_read_memory, handle_status, process_serial_event)
(handle_serial_event, handle_target_event): Adjust to
set_desired_thread prototype change.
* target.c (set_desired_thread): Remove 'use_general' parameter
and adjust.
* target.h (set_desired_thread): Remove 'use_general' parameter.
Using std::string in handle_qxfer_libraries and friends allow to
simplify the code. We don't have to manually free the buffer, and we
don't have to pre-compute the required space.
gdb/gdbserver/ChangeLog:
* server.c (accumulate_file_name_length): Remove.
(emit_dll_description): Adjust to std::string change.
(handle_qxfer_libraries): Use std::string to hold document.
This is a simple replacement, it allows removing some manual free'ing in
the callers.
gdb/ChangeLog:
* common/buffer.c (buffer_xml_printf): Adjust.
* common/xml-utils.c (xml_escape_text): Change return type to
std::string, update code accordingly.
* common/xml-utils.h (xml_escape_text): Change return type to
std::string.
* rs6000-aix-tdep.c (rs6000_aix_shared_library_to_xml): Adjust.
* windows-tdep.c (windows_xfer_shared_library): Adjust.
* unittests/xml-utils-selftests.c (test_xml_escape_text):
Adjust.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_qxfer_libraries_svr4): Adjust to change of
return type of xml_escape_text.
* server.c (emit_dll_description): Likewise.
With the growing number of selftests, I think it would be useful to be
able to run only a subset of the tests. This patch associates a name to
each registered selftest. It then allows doing something like:
(gdb) maintenance selftest aarch64
Running self-tests.
Running selftest aarch64-analyze-prologue.
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
or with gdbserver:
./gdbserver --selftest=aarch64
In both cases, only the tests that contain "aarch64" in their name are
ran. To help validate that the tests you want to run were actually ran,
it also prints a message with the test name before running each test.
Right now, all the arch-dependent tests are registered as a single test
of the selftests. To be able to filter those too, I made them
"first-class citizen" selftests. The selftest type is an interface,
with different implementations for "simple selftests" and "arch
selftests". The run_tests function simply iterates on that an invokes
operator() on each test.
I changed the tests data structure from a vector to a map, because
- it allows iterating in a stable (alphabetical) order
- it allows to easily verify if a test with a given name has been
registered, to avoid duplicates
There's also a new command "maintenance info selftests" that lists the
registered selftests.
gdb/ChangeLog:
* common/selftest.h (selftest): New struct/interface.
(register_test): Add name parameter, add new overload.
(run_tests): Add filter parameter.
(for_each_selftest_ftype): New typedef.
(for_each_selftest): New declaration.
* common/selftest.c (tests): Change type to
map<string, unique_ptr<selftest>>.
(simple_selftest): New struct.
(register_test): New function.
(register_test): Add name parameter and use it.
(run_tests): Add filter parameter and use it. Add prints.
Adjust to vector -> map change.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add names when
registering selftests.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* disasm-selftests.c (_initialize_disasm_selftests): Likewise.
* dwarf2-frame.c (_initialize_dwarf2_frame): Likewise.
* dwarf2loc.c (_initialize_dwarf2loc): Likewise.
* findvar.c (_initialize_findvar): Likewise.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise.
* maint.c (maintenance_selftest): Update call to run_tests.
(maintenance_info_selftests): New function.
(_initialize_maint_cmds): Register "maintenance info selftests"
command. Update "maintenance selftest" doc.
* regcache.c (_initialize_regcache): Add names when registering
selftests.
* rust-exp.y (_initialize_rust_exp): Likewise.
* selftest-arch.c (gdbarch_selftest): New struct.
(gdbarch_tests): Remove.
(register_test_foreach_arch): Add name parameter. Call
register_test.
(tests_with_arch): Remove, move most content to
gdbarch_selftest::operator().
(_initialize_selftests_foreach_arch): Remove.
* selftest-arch.h (register_test_foreach_arch): Add name
parameter.
(run_tests_with_arch): New declaration.
* utils-selftests.c (_initialize_utils_selftests): Add names
when registering selftests.
* utils.c (_initialize_utils): Likewise.
* unittests/array-view-selftests.c
(_initialize_array_view_selftests): Likewise.
* unittests/environ-selftests.c (_initialize_environ_selftests):
Likewise.
* unittests/function-view-selftests.c
(_initialize_function_view_selftests): Likewise.
* unittests/offset-type-selftests.c
(_initialize_offset_type_selftests): Likewise.
* unittests/optional-selftests.c
(_initialize_optional_selftests): Likewise.
* unittests/scoped_restore-selftests.c
(_initialize_scoped_restore_selftests): Likewise.
* NEWS: Document "maintenance selftest" and "maint info
selftests".
gdb/gdbserver/ChangeLog:
* server.c (captured_main): Accept argument for --selftest.
Update run_tests call.
* linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names
when registering selftests.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document filter parameter
of "maint selftest". Document "maint info selftests" command.
As explained in the previous patch, the gdb_id concept is no longer
relevant. The function thread_to_gdb_id is trivial, it returns the
thread's ptid. Remove it and replace its usage with ptid_of.
The changes in nto-low.c and lynx-low.c are fairly straightforward, but
I was not able to build test them.
gdb/gdbserver/ChangeLog:
* inferiors.h (thread_to_gdb_id): Remove.
* inferiors.c (thread_to_gdb_id): Remove.
* server.c (handle_qxfer_threads_worker, handle_query): Adjust.
* lynx-low.c (lynx_resume, lynx_wait_1, lynx_fetch_registers,
lynx_store_registers, lynx_read_memory, lynx_write_memory):
Likewise.
* nto-low.c (nto_fetch_registers, nto_store_registers,
nto_stopped_by_watchpoint, nto_stopped_data_address): Likewise.
From what I understand, this function is not doing anything useful as of
today.
Here's the result of my archeological research:
- The field thread_info::gdb_id was added in
a06660f7 Use LWP IDs for thread IDs in gdbserver
There was problem when using a 32-bits gdb with a 64-bits gdbserver.
For some reason that I don't fully understand, the thread ids
exchanged between gdb and gdbserver could overflow a 32 bits data
type. My guess is that they were the thread address (e.g. the
0x7ffff7f20b40 in "Thread 0x7ffff7f20b40 (LWP 1058)" today). This
patch changed that so gdb/gdbserver would talk in terms of the OS
assigned numerical id (as shown in ps). It therefore added a way to
convert between this gdb_id (the numerical id) and the thread id (the
address).
- 95954743cb Implement the multiprocess extensions, and add linux
multiprocess supportNon-stop mode support.
This patch made gdbserver deal with threads using their numerical ids
and not the address-like id. Starting from there, the gdb_id <->
thread id conversion was not needed anymore, since the remote protocol
and gdbserver were using the same kind of ids again. The gdb_id field
in the thread_info structure was also unused starting there.
- d50171e4 Teach linux gdbserver to step-over-breakpoints.
This patch moved the thread_info structure around, and got rid of the
gdb_id field (which was unused).
Looking at the implementation of gdb_id_to_thread_id, it is not doing
anything useful. It is looking up a thread by ptid using
find_thread_ptid, which basically loops over all threads looking at
their entry.id field. If a thread with that ptid is found, it returns
its entry.id field. So it will always return the same thing as it input
(with the exception of if no thread exist with that ptid, then it will
return null_ptid).
gdb/gdbserver/ChangeLog:
* inferiors.h (gdb_id_to_thread_id): Remove.
* inferiors.c (gdb_id_to_thread_id): Remove.
* server.c (process_serial_event): Adjust to gdb_id_to_thread_id
removal. Move pid declaration closer to where it's used.
The code required to handle the 'D' packet is non trivial, so move it
out to its own function.
The moved out code is identical, except for the call to strtol and some
breaks that became returns.
Tested manually, and by running gdb.base/*detach*.exp with
native-gdbserver and native-extended-gdbserver.
gdb/gdbserver/ChangeLog:
* server.c (handle_detach): New function.
(process_serial_event): Move code out, call handle_detach.
I find it very confusing to define the require_running in the middle of
the file, and re-define it to something else later in the middle of the
same file. I think it would be better if those macros had different
names so that we know exactly what they do.
gdb/gdbserver/ChangeLog:
* server.c (require_running): Rename to ...
(require_running_or_return): ... this ...
(require_running_or_break): ... and this.
(handle_query, process_serial_event): Adjust.
We have about 6 functions/callbacks to find_inferior meant to find a
thread that belongs to a given pid. Remove all but
find_any_thread_of_pid and replace their uses with
find_any_thread_of_pid.
gdb/gdbserver/ChangeLog:
* server.c (first_thread_of): Remove.
(process_serial_event): Replace usage of first_thread_of with
find_any_thread_of_pid.
* tracepoint.c (same_process_p): Remove.
(gdb_agent_about_to_close): Replace usage of same_process_p with
find_any_thread_of_pid.
* linux-x86-low.c (same_process_callback): Remove.
(x86_arch_setup_process_callback): Replace usage of
same_process_callback with find_any_thread_of_pid.
* thread-db.c (any_thread_of): Remove.
(switch_to_process): Replace usage of any_thread_of with
find_any_thread_of_pid.
* inferiors.c (thread_pid_matches_callback): Remove.
(find_thread_process): Adjust to use find_any_thread_of_pid.
GDBserver still uses pre-generated target descriptions in order to
reply to GDB's query on target description (see xml-builtin-generated.c
in GDBserver build directory). This patch teaches GDBserver to
create XML contents according to the target descriptions rather than
using pre-generated ones.
First, change target feature c files to pass the feature xml file
name to tdesc_create_feature, so that target description in GDBserver
can record them, and create XML contents from these features in
buffer, like
...
<xi:include href="$FEATURE1_XML_NAME"/>
<xi:include href="$FEATURE2_XML_NAME"/>
...
and send this buffer back to GDB.
Note that this patch reuses target_desc.xmltarget a little bit, which is
to hold the XML contents dynamically generated in tdesc_get_features_xml.
However, it is not xfree'ed in ~target_desc, because we can't tell it is
from xstrdup or a literal string. Since we don't delete target_desc,
there is no memory leak yet. After we change all target descriptions to
the new style, target_desc.xmltarget is from xstrdup, then, we can safely
xfree it in ~target_desc.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* arch/tdesc.h (tdesc_create_feature): Add an argument xml.
* target-descriptions.c (tdesc_create_feature): Likewise, and
adjust code.
* features/i386/32bit-avx.c: Re-generated.
* features/i386/32bit-avx512.c: Re-generated.
* features/i386/32bit-core.c: Re-generated.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-mpx.c: Re-generated.
* features/i386/32bit-pkeys.c: Re-generated.
* features/i386/32bit-sse.c: Re-generated.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* linux-x86-tdesc.c: Don't include <inttypes.h>.
(i386_linux_read_description) [!IN_PROCESS_AGENT]: Call
set_tdesc_architecture and set_tdesc_osabi. Remove code setting
.xmltarget.
* server.c (get_features_xml): Call tdesc_get_features_xml.
* tdesc.c (set_tdesc_architecture): New function.
(set_tdesc_osabi): New function.
(tdesc_get_features_xml): New function.
(tdesc_create_feature): Add an argument.
* tdesc.h (struct target_desc) <features>: New field.
<arch, osabi>: New field.
(~target_desc): xfree features, arch, and osabi.
(target_desc::oerator==): Don't compare .xmltarget.
[!IN_PROCESS_AGENT] (set_tdesc_architecture): Declare.
(set_tdesc_osabi): Likewise.
(tdesc_get_features_xml): Likewise.
A quite straightforward change. It does "fix" leaks in record-btrace.c,
although since this is only used in debug printing code, it has no real
world impact.
gdb/ChangeLog:
* target/waitstatus.h (target_waitstatus_to_string): Change
return type to std::string.
* target/waitstatus.c (target_waitstatus_to_string): Return
std::string.
* target.h (target_waitstatus_to_string): Remove declaration.
* infrun.c (resume, clear_proceed_status_thread,
print_target_wait_results, do_target_wait, save_waitstatus,
stop_all_threads): Adjust.
* record-btrace.c (record_btrace_wait): Adjust.
* target-debug.h
(target_debug_print_struct_target_waitstatus_p): Adjust.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Adjust.
* server.c (queue_stop_reply_callback): Adjust.
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
This patch uses GDB self test in GDBserver. The self tests are run if
GDBserver is started with option --selftest.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* NEWS: Mention GDBserver's new option "--selftest".
* Makefile.in (SFILES): Remove selftest.c, add common/selftest.c.
* selftest.c: Move it to common/selftest.c.
* selftest.h: Move it to common/selftest.h.
* selftest-arch.c (reset): New function.
(tests_with_arch): Call reset.
gdb/gdbserver:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* Makefile.in (OBS): Add selftest.o.
* configure.ac: AC_DEFINE GDB_SELF_TEST if $development.
* configure, config.in: Re-generated.
* server.c: Include common/sefltest.h.
(captured_main): Handle option --selftest.
gdb/testsuite:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.server/unittest.exp: New.
gdb/doc:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Server): Document "--selftest".
