Using 'x/hf' should print bytes as float16, but instead it currently
prints as an integer. I tracked this down to a missing case in
float_type_from_length.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30161
Approved-By: Simon Marchi <simon.marchi@efficios.com>
As described in the previous commit for this series, I became
concerned that there might be instances in which a QUIT (due to either
a SIGINT or SIGTERM) might not cause execution to return to the top
level. In some (though very few) instances, it is okay to not
propagate the exception for a Ctrl-C / SIGINT, but I don't think that
it is ever okay to swallow the exception caused by a SIGTERM.
Allowing that to happen would definitely be a deviation from the
current behavior in which GDB exits upon receipt of a SIGTERM.
I looked at all cases where an exception handler catches a
gdb_exception. Handlers which did NOT need modification were those
which satisifed one or more of the following conditions:
1) There is no call path to maybe_quit() in the try block. I used a
static analysis tool to help make this determination. In
instances where the tool didn't provide an answer of "yes, this
call path can result in maybe_quit() being called", I reviewed it
by hand.
2) The catch block contains a throw for conditions that it
doesn't want to handle; these "not handled" conditions
must include the quit exception and the new "forced quit" exception.
3) There was (also) a catch for gdb_exception_quit.
Any try/catch blocks not meeting the above conditions could
potentially swallow a QUIT exception.
My first thought was to add catch blocks for gdb_exception_quit and
then rethrow the exception. But Pedro pointed out that this can be
handled without adding additional code by simply catching
gdb_exception_error instead. That's what this patch series does.
There are some oddball cases which needed to be handled differently,
plus the extension languages, but those are handled in later patches.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
Tested-by: Tom de Vries <tdevries@suse.de>
Approved-by: Pedro Alves <pedro@palves.net>
Simon pointed out some spots were doing val.get()->mumble, where val
is a value_ref_ptr. These were introduced by the function-to-method
script, replacing older code that passed the result of .get() to a
function.
Now that value.h is using methods, we can instead rely on operator->.
This patch replaces all the newly-introduced instances of this.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
This removes deprecated_lval_hack and the VALUE_LVAL macro, replacing
all uses with a call to value::lval.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
This turns many functions that are related to optimized-out or
availability-checking to be methods of value. The static function
value_entirely_covered_by_range_vector is also converted to be a
private method.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
This turns the remaining value_contents functions -- value_contents,
value_contents_all, value_contents_for_printing, and
value_contents_for_printing_const -- into methods of value. It also
converts the static functions require_not_optimized_out and
require_available to be private methods.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
This changes the value_lazy and set_value_lazy functions to be methods
of value. Much of this patch was written by script.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
This commit introduces the idea of loading only part of an array in
order to print it, what I call "limited length" arrays.
The motivation behind this work is to make it possible to print slices
of very large arrays, where very large means bigger than
`max-value-size'.
Consider this GDB session with the current GDB:
(gdb) set max-value-size 100
(gdb) p large_1d_array
value requires 400 bytes, which is more than max-value-size
(gdb) p -elements 10 -- large_1d_array
value requires 400 bytes, which is more than max-value-size
notice that the request to print 10 elements still fails, even though 10
elements should be less than the max-value-size. With a patched version
of GDB:
(gdb) p -elements 10 -- large_1d_array
$1 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9...}
So now the print has succeeded. It also has loaded `max-value-size'
worth of data into value history, so the recorded value can be accessed
consistently:
(gdb) p -elements 10 -- $1
$2 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9...}
(gdb) p $1
$3 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, <unavailable> <repeats 75 times>}
(gdb)
Accesses with other languages work similarly, although for Ada only
C-style [] array element/dimension accesses use history. For both Ada
and Fortran () array element/dimension accesses go straight to the
inferior, bypassing the value history just as with C pointers.
Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
This commit splits the `set/show print elements' option into two. We
retain `set/show print elements' for controlling how many elements of an
array we print, but a new `set/show print characters' setting is added
which is used for controlling how many characters of a string are
printed.
The motivation behind this change is to allow users a finer level of
control over how data is printed, reflecting that, although strings can
be thought of as arrays of characters, users often want to treat these
two things differently.
For compatibility reasons by default the `set/show print characters'
option is set to `elements', which makes the limit for character strings
follow the setting of the `set/show print elements' option, as it used
to. Using `set print characters' with any other value makes the limit
independent from the `set/show print elements' setting, however it can
be restored to the default with the `set print characters elements'
command at any time.
A corresponding `-characters' option for the `print' command is added,
with the same semantics, i.e. one can use `elements' to make a given
`print' invocation follow the limit of elements, be it set with the
`-elements' option also given with the same invocation or taken from the
`set/show print elements' setting, for characters as well regardless of
the current setting of the `set/show print characters' option.
The GDB changes are all pretty straightforward, just changing references
to the old 'print_max' to use a new `get_print_max_chars' helper which
figures out which of the two of `print_max' and `print_max_chars' values
to use.
Likewise, the documentation is just updated to reference the new setting
where appropriate.
To make people's life easier the message shown by `show print elements'
now indicates if the setting also applies to character strings:
(gdb) set print characters elements
(gdb) show print elements
Limit on string chars or array elements to print is 200.
(gdb) set print characters unlimited
(gdb) show print elements
Limit on array elements to print is 200.
(gdb)
and the help text shows the dependency as well:
(gdb) help set print elements
Set limit on array elements to print.
"unlimited" causes there to be no limit.
This setting also applies to string chars when "print characters"
is set to "elements".
(gdb)
In the testsuite there are two minor updates, one to add `-characters'
to the list of completions now shown for the `print' command, and a bare
minimum pair of checks for the right handling of `set print characters'
and `show print characters', copied from the corresponding checks for
`set print elements' and `show print elements' respectively.
Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
Approved-By: Simon Marchi <simon.marchi@efficios.com>
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
Currently, every internal_error call must be passed __FILE__/__LINE__
explicitly, like:
internal_error (__FILE__, __LINE__, "foo %d", var);
The need to pass in explicit __FILE__/__LINE__ is there probably
because the function predates widespread and portable variadic macros
availability. We can use variadic macros nowadays, and in fact, we
already use them in several places, including the related
gdb_assert_not_reached.
So this patch renames the internal_error function to something else,
and then reimplements internal_error as a variadic macro that expands
__FILE__/__LINE__ itself.
The result is that we now should call internal_error like so:
internal_error ("foo %d", var);
Likewise for internal_warning.
The patch adjusts all calls sites. 99% of the adjustments were done
with a perl/sed script.
The non-mechanical changes are in gdbsupport/errors.h,
gdbsupport/gdb_assert.h, and gdb/gdbarch.py.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
This changes GDB to use frame_info_ptr instead of frame_info *
The substitution was done with multiple sequential `sed` commands:
sed 's/^struct frame_info;/class frame_info_ptr;/'
sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
issues in a few files, that were manually fixed.
sed 's/\<frame_info \*/frame_info_ptr /g'
sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
problems.
The changed files were then manually checked and some 'sed' changes
undone, some constructors and some gets were added, according to what
made sense, and what Tromey originally did
Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
Approved-by: Tom Tomey <tom@tromey.com>
Make an introduction of a new print setting that can be set by 'set
print nibbles [on|off]'. The default value if OFF, which can be changed
by user manually. Of course, 'show print nibbles' is also included in
the patch.
The new feature displays binary values by group, with four bits per
group. The motivation for this work is to enhance the readability of
binary values.
Here's a GDB session before this patch is applied.
(gdb) print var_a
$1 = 1230
(gdb) print/t var_a
$2 = 10011001110
With this patch applied, we can use the new print setting to display the
new form of the binary values.
(gdb) print var_a
$1 = 1230
(gdb) print/t var_a
$2 = 10011001110
(gdb) set print nibbles on
(gdb) print/t var_a
$3 = 0100 1100 1110
Tested on x86_64 openSUSE Tumbleweed.
Add a getter and a setter for a minimal symbol's type. Remove the
corresponding macro and adjust all callers.
Change-Id: I89900df5ffa5687133fe1a16b2e0d4684e67a77d
Various spots in gdb currently know about the wrap buffer, and so are
careful to call wrap_here to be certain that all output has been
flushed.
Now that the pager is just an ordinary stream, this isn't needed, and
a simple call to gdb_flush is enough.
Similarly, there are places where gdb prints to gdb_stderr, but first
flushes gdb_stdout. stderr_file already flushes gdb_stdout, so these
aren't needed.
fprintf_symbol_filtered is misnamed, because whether filtering happens
is now up to the stream. This renames it to fprintf_symbol, which
isn't a great name (the first "f" doesn't mean much and the second one
is truly meaningless here), but "print_symbol" was already taken.
Now that filtered and unfiltered output can be treated identically, we
can unify the printf family of functions. This is done under the name
"gdb_printf". Most of this patch was written by script.
Now that filtered and unfiltered output can be treated identically, we
can unify the puts family of functions. This is done under the name
"gdb_puts". Most of this patch was written by script.
This rewrites the output pager as a ui_file implementation.
A new header is introduced to declare the pager class. The
implementation remains in utils.c for the time being, because there
are some static globals there that must be used by this code. (This
could be cleaned up at some future date.)
I went through all the text output in gdb to ensure that this change
should be ok. There are a few cases:
* Any existing call to printf_unfiltered is required to be avoid the
pager. This is ensured directly in the implementation.
* All remaining calls to the f*_unfiltered functions -- the ones that
take an explicit ui_file -- either send to an unfiltered stream
(e.g., gdb_stderr), which is obviously ok; or conditionally send to
gdb_stdout
I investigated all such calls by searching for:
grep -e '\bf[a-z0-9_]*_unfiltered' *.[chyl] */*.[ch] | grep -v gdb_stdlog | grep -v gdb_stderr
This yields a number of candidates to check.
* The breakpoint _print_recreate family, and
save_trace_state_variables. These are used for "save" commands
and so are fine.
* Things printing to a temporary stream. Obviously ok.
* Disassembly selftests.
* print_gdb_help - this is non-obvious, but ok because paging isn't
yet enabled at this point during startup.
* serial.c - doens't use gdb_stdout
* The code in compile/. This is all printing to a file.
* DWARF DIE dumping - doesn't reference gdb_stdout.
* Calls to the _filtered form -- these are all clearly ok, because if
they are using gdb_stdout, then filtering will still apply; and if
not, then filtering never applied and still will not.
Therefore, at this point, there is no longer any distinction between
all the other _filtered and _unfiltered calls, and they can be
unified.
In this patch, take special note of the vfprintf_maybe_filtered and
ui_file::vprintf change. This is one instance of the above idea,
erasing the distinction between filtered and unfiltered -- in this
part of the change, the "unfiltered_output" flag is never passe to
cli_ui_out. Subsequent patches will go much further in this
direction.
Also note the can_emit_style_escape changes in ui-file.c. Checking
against gdb_stdout or gdb_stderr was always a bit of a hack; and now
it is no longer needed, because this is decision can be more fully
delegated to the particular ui_file implementation.
ui_file::can_page is removed, because this patch removed the only call
to it.
I think this is the main part of fixing PR cli/7234.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7234
Currently, "print/x" will display a floating-point value by first
casting it to an integer type. This yields weird results like:
(gdb) print/x 1.5
$1 = 0x1
This has confused users multiple times -- see PR gdb/16242, where
there are several dups. I've also seen some confusion from this
internally at AdaCore.
The manual says:
'x'
Regard the bits of the value as an integer, and print the integer
in hexadecimal.
... which seems more useful. So, perhaps what happened is that this
was incorrectly implemented (or maybe correctly implemented and then
regressed, as there don't seem to be any tests).
This patch fixes the bug.
There was a previous discussion where we agreed to preserve the old
behavior:
https://sourceware.org/legacy-ml/gdb-patches/2017-06/msg00314.html
However, I think it makes more sense to follow the manual.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16242
Add a getter and a setter for whether a symbol is an argument. Remove
the corresponding macro and adjust all callers.
Change-Id: I71b4f0465f3dfd2ed8b9e140bd3f7d5eb8d9ee81
Add a getter and a setter for whether a symbol is objfile owned. Remove
the corresponding macro and adjust all callers.
Change-Id: Ib7ef3718d65553ae924ca04c3fd478b0f4f3147c
I think it only really makes sense to call wrap_here with an argument
consisting solely of spaces. Given this, it seemed better to me that
the argument be an int, rather than a string. This patch is the
result. Much of it was written by a script.
In an earlier version of the pager rewrite series, it was important to
audit unfiltered output calls to see which were truly necessary.
This is no longer necessary, but it still seems like a decent cleanup
to change calls to avoid explicitly passing gdb_stdout. That is,
rather than using something like fprintf_unfiltered with gdb_stdout,
the code ought to use plain printf_unfiltered instead.
This patch makes this change. I went ahead and converted all the
_filtered calls I could find, as well, for the same clarity.
Many otherwise ordinary commands choose to use unfiltered output
rather than filtered. I don't think there's any reason for this, so
this changes many such commands to use filtered output instead.
Note that complete_command is not touched due to a comment there
explaining why unfiltered output is believed to be used.
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
Change gdb_assert_not_reached to accept a format string plus
corresponding arguments. This allows giving more precise messages.
Because the format string passed by the caller is prepended with a "%s:"
to add the function name, the callers can no longer pass a translated
string (`_(...)`). Make the gdb_assert_not_reached include the _(),
just like the gdb_assert_fail macro just above.
Change-Id: Id0cfda5a57979df6cdaacaba0d55dd91ae9efee7
The bug fixed by this [1] patch was caused by an out-of-bounds access to
a value's content. The code gets the value's content (just a pointer)
and then indexes it with a non-sensical index.
This made me think of changing functions that return value contents to
return array_views instead of a plain pointer. This has the advantage
that when GDB is built with _GLIBCXX_DEBUG, accesses to the array_view
are checked, making bugs more apparent / easier to find.
This patch changes the return types of these functions, and updates
callers to call .data() on the result, meaning it's not changing
anything in practice. Additional work will be needed (which can be done
little by little) to make callers propagate the use of array_view and
reap the benefits.
[1] https://sourceware.org/pipermail/gdb-patches/2021-September/182306.html
Change-Id: I5151f888f169e1c36abe2cbc57620110673816f3
I believe that many calls to fprintf_symbol_filtered are incorrect.
In particular, there are some that pass a symbol's print name, like:
fprintf_symbol_filtered (gdb_stdout, sym->print_name (),
current_language->la_language, DMGL_ANSI);
fprintf_symbol_filtered uses the "demangle" global to decide whether
or not to demangle -- but print_name does this as well. This can lead
to double-demangling. Normally this could be innocuous, except I also
plan to change Ada demangling in a way that causes this to fail.
When the architecture supports memory tagging, we handle
pointer/reference types in a special way, so we can validate tags and
show mismatches.
Unfortunately, the currently implementation errors out when the user
prints non-address values: composite types, floats, references, member
functions and other things.
Vector registers:
(gdb) p $v0
Value can't be converted to integer.
Non-existent internal variables:
(gdb) p $foo
Value can't be converted to integer.
The same happens for complex types and printing struct/union types.
There are a few problems here.
The first one is that after print_command_1 evaluates the expression
to print, the tag validation code call value_as_address
unconditionally, without making sure we have have a suitable type
where it makes to sense to call it. That results in value_as_address
(if it isn't given a pointer-like type) trying to treat the value as
an integer and convert it to an address, which #1 - doesn't make sense
(i.e., no sense in validating tags after "print 1"), and throws for
non-integer-convertible types. We fix this by making sure we have a
pointer or reference type first, and only if so then proceed to check
if the address-like value has tags.
The second is that we're calling value_as_address even if we have an
optimized out or unavailable value, which throws, because the value's
contents aren't fully accessible/readable. This error currently
escapes out and aborts the print. This case is fixed by checking for
optimized out / unavailable explicitly.
Third, the tag checking process does not gracefully handle exceptions.
If any exception is thrown from the tag validation code, we abort the
print. E.g., the target may fail to access tags via a running thread.
Or the needed /proc files aren't available. Or some other untold
reason. This is a bit too rigid. This commit changes print_command_1
to catch errors, print them, and still continue with the normal
expression printing path instead of erroring out and printing nothing
useful.
With this patch, printing works correctly again:
(gdb) p $v0
$1 = {d = {f = {2.0546950501119882e-81, 2.0546950501119882e-81}, u = {3399988123389603631, 3399988123389603631}, s = {
3399988123389603631, 3399988123389603631}}, s = {f = {1.59329203e-10, 1.59329203e-10, 1.59329203e-10, 1.59329203e-10}, u = {
791621423, 791621423, 791621423, 791621423}, s = {791621423, 791621423, 791621423, 791621423}}, h = {bf = {1.592e-10,
1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10}, f = {0.11224, 0.11224, 0.11224, 0.11224, 0.11224,
0.11224, 0.11224, 0.11224}, u = {12079, 12079, 12079, 12079, 12079, 12079, 12079, 12079}, s = {12079, 12079, 12079, 12079,
12079, 12079, 12079, 12079}}, b = {u = {47 <repeats 16 times>}, s = {47 <repeats 16 times>}}, q = {u = {
62718710765820030520700417840365121327}, s = {62718710765820030520700417840365121327}}}
(gdb) p $foo
$2 = void
(gdb) p 2 + 2i
$3 = 2 + 2i
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28110
Convert these three macros to methods of obj_section. The problem fixed
by the following patch is caused by an out of bound access of the
objfile::section_offsets vector. Since this is deep in macros, we don't
get a clear backtrace and it's difficult to debug. Changing that to
methods means we can step in them and break on them.
Because their implementation requires knowing about struct objfile, move
struct obj_section below struct objfile in objfiles.h.
The obj_section_offset was used in one place as an lvalue to set
offsets, in machoread.c. Replace that with a set_offset method.
Add the objfile::section_offset and objfile::set_section_offset methods
to improve encapsulation (reduce other objects poking into struct
objfile's internals).
gdb/ChangeLog:
* objfiles.h (struct obj_section): Move down.
<offset, set_offset, addr, endaddr>: New.
(obj_section_offset, obj_section_addr, obj_section_endaddr),
replace all users to use obj_section methods.
(struct objfile) <section_offset, set_section_offset>: New.
Change-Id: I97e8fcae93ab2353fbdadcb4a5ec10d7949a7334
I spotted some indentation issues where we had some spaces followed by
tabs at beginning of line, that I wanted to fix. So while at it, I did
a quick grep to find and fix all I could find.
gdb/ChangeLog:
* Fix tab after space indentation issues throughout.
Change-Id: I1acb414dd9c593b474ae2b8667496584df4316fd
Same idea as previous patch, but for add_alias_cmd. Remove the overload
that accepts the target command as a string (the target command name),
leaving only the one that takes the cmd_list_element.
gdb/ChangeLog:
* command.h (add_alias_cmd): Accept target as
cmd_list_element. Update callers.
Change-Id: I546311f411e9e7da9302322d6ffad4e6c56df266
