This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
Many global arrays in gdb could be marked "const" but are not. This
patch changes some of them. (There may be other arrays that could
benefit from this treatment. I only examined arrays of strings.)
This lets the linker move some symbols to the readonly data section.
For example, previously:
0000000000000000 d _ZL18can_use_agent_enum
is now:
0000000000000030 r _ZL18can_use_agent_enum
2020-09-14 Tom Tromey <tromey@adacore.com>
* x86-tdep.h (x86_in_indirect_branch_thunk): Update.
* x86-tdep.c (x86_is_thunk_register_name)
(x86_in_indirect_branch_thunk): Update.
* sparc64-tdep.c (sparc64_fpu_register_names)
(sparc64_cp0_register_names, sparc64_register_names)
(sparc64_pseudo_register_names): Now const.
* sparc-tdep.h (struct gdbarch_tdep) <fpu_register_names,
cp0_registers_num>: Now const.
* sparc-tdep.c (sparc_core_register_names)
(sparc32_fpu_register_names, sparc32_cp0_register_names)
(sparc32_pseudo_register_names): Now const.
(validate_tdesc_registers): Update.
* rust-lang.c (rust_extensions): Now const.
* p-lang.c (p_extensions): Now const.
* objc-lang.c (objc_extensions): Now const.
* nto-tdep.c (nto_thread_state_str): Now const.
* moxie-tdep.c (moxie_register_names): Now const.
* mips-tdep.h (struct gdbarch_tdep) <mips_processor_reg_names>:
Now const.
* mips-tdep.c (mips_generic_reg_names, mips_tx39_reg_names)
(mips_linux_reg_names): Now const.
(mips_gdbarch_init): Update.
* microblaze-tdep.c (microblaze_register_names): Now const.
* m68k-tdep.c (m68k_register_names): Now const.
* m32r-tdep.c (m32r_register_names): Now const.
* ia64-tdep.c (ia64_register_names): Now const.
* i386-tdep.h (struct gdbarch_tdep) <register_names,
ymmh_register_names, ymm16h_regnum, mpx_register_names,
k_register_names, zmmh_register_names, xmm_avx512_register_names,
ymm_avx512_register_names, pkeys_register_names>: Now const.
* i386-tdep.c (i386_register_names, i386_zmm_names)
(i386_zmmh_names, i386_k_names, i386_ymm_names, i386_ymmh_names)
(i386_mpx_names, i386_pkeys_names, i386_bnd_names)
(i386_mmx_names, i386_byte_names, i386_word_names): Now const.
* f-lang.c (f_extensions): Now const.
* d-lang.c (d_extensions): Now const.
* csky-tdep.c (csky_register_names): Now const.
* charset.c (default_charset_names, charset_enum): Now const.
(_initialize_charset): Update.
* c-lang.c (c_extensions, cplus_extensions, asm_extensions): Now
const.
* bsd-uthread.c (bsd_uthread_solib_names): Now const.
(bsd_uthread_solib_loaded): Update.
(bsd_uthread_state): Now const.
* amd64-tdep.c (amd64_register_names, amd64_ymm_names)
(amd64_ymm_avx512_names, amd64_ymmh_names)
(amd64_ymmh_avx512_names, amd64_mpx_names, amd64_k_names)
(amd64_zmmh_names, amd64_zmm_names, amd64_xmm_avx512_names)
(amd64_pkeys_names, amd64_byte_names, amd64_word_names)
(amd64_dword_names): Now const.
* agent.c (can_use_agent_enum): Now const.
* ada-tasks.c (task_states, long_task_states): Now const.
* ada-lang.c (known_runtime_file_name_patterns)
(known_auxiliary_function_name_patterns, attribute_names)
(standard_exc, ada_extensions): Now const.
gdbserver/ChangeLog
2020-09-14 Tom Tromey <tromey@adacore.com>
* tracepoint.cc (eval_result_names): Now const.
* ax.cc (gdb_agent_op_names): Now const.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This commit moves the path manipulation routines found on utils.c to a
new common/pathstuff.c, and updates the Makefile.in's accordingly.
The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and
"gdb_abspath".
This will be needed because gdbserver will have to call "gdb_abspath"
on my next patch, which implements a way to expand the path of the
inferior provided by the user in order to allow specifying just the
binary name when starting gdbserver, like:
$ gdbserver :1234 a.out
With the recent addition of the startup-with-shell feature on
gdbserver, this scenario doesn't work anymore if the user doesn't have
the current directory listed in the PATH variable.
I had to do a minor adjustment on "gdb_abspath" because we don't have
access to "tilde_expand" on gdbserver, so now the function is using
"gdb_tilde_expand" instead. Otherwise, the code is the same.
Regression tested on the BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
(HFILES_NO_SRCDIR): Add "common/pathstuff.h".
* auto-load.c: Include "common/pathstuff.h".
* common/common-def.h (current_directory): Move here.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
function.
* common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
prototype.
* common/pathstuff.c: New file.
* common/pathstuff.h: New file.
* compile/compile.c: Include "common/pathstuff.h".
* defs.h (current_directory): Move to "common/common-defs.h".
* dwarf2read.c: Include "common/pathstuff.h".
* exec.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* linux-thread-db.c: Likewise.
* main.c: Likewise.
* nto-tdep.c: Likewise.
* objfiles.c: Likewise.
* source.c: Likewise.
* symtab.c: Likewise.
* utils.c: Include "common/pathstuff.h".
(gdb_realpath): Move to "common/pathstuff.c".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
* utils.h (gdb_realpath): Move to "common/pathstuff.h".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c".
(OBJS): Add "pathstuff.o".
* server.c (current_directory): New global variable.
(captured_main): Initialize "current_directory".
This changes openp, source_full_path_of, and find_and_open_source to
take a unique_xmalloc_ptr, rather than a char*, as an outgoing
argument type. This simplifies the API, ownership-wise, and allows
for the removal of some cleanups.
gdb/ChangeLog
2018-02-14 Tom Tromey <tom@tromey.com>
* symfile.c (symfile_bfd_open): Update.
* source.h (openp, source_full_path_of, find_and_open_source):
Change argument type to unique_xmalloc_ptr.
* source.c (openp): Take a unique_xmalloc_ptr.
(source_full_path_of, find_and_open_source): Likewise.
(open_source_file, symtab_to_fullname): Update.
* solist.h (struct target_so_ops) <find_and_open_solib>: Take a
unique_xmalloc_ptr.
* solib.c (solib_find_1): Use unique_xmalloc_ptr.
(exec_file_find): Update.
* psymtab.c (psymtab_to_fullname): Update.
* nto-tdep.h (nto_find_and_open_solib): Update.
* nto-tdep.c (nto_find_and_open_solib): Change temp_path to a
unique_xmalloc_ptr.
* exec.c (exec_file_attach): Update.
* dwarf2read.c (try_open_dwop_file): Use unique_xmalloc_ptr.
* cli/cli-cmds.c (find_and_open_script): Use unique_xmalloc_ptr.
I noticed a few declarations in defs.h that really could be put into
source.h. I think it's generally preferable to something out of
defs.h unless it is needed by most of the files in gdb.
gdb/ChangeLog
2018-02-14 Tom Tromey <tom@tromey.com>
* solib.c: Include source.h.
* nto-tdep.c: Include source.h.
* mi/mi-cmd-env.c: Include source.h.
* infcmd.c: Include source.h.
* exec.c: Include source.h.
* defs.h (enum openp_flag, openp, source_full_path_of, mod_path)
(add_path, directory_switch, source_path, init_source_path): Move
declarations...
* source.h (enum openp_flag, openp, source_full_path_of, mod_path)
(add_path, directory_switch, source_path, init_source_path):
...here.
There are multiple definitions of the private_thread_info structure
compiled in the same GDB build. Because of the one definition rule, we
need to change this if we want to be able to make them non-POD (e.g. use
std::vector fields). This patch creates a class hierarchy, with
private_thread_info being an abstract base class, and all the specific
implementations inheriting from it.
In order to poison XNEW/xfree for non-POD types, it is also needed to
get rid of the xfree in thread_info::~thread_info, which operates on an
opaque type. This is replaced by thread_info::priv now being a
unique_ptr, which calls the destructor of the private_thread_info
subclass when the thread is being destroyed.
Including gdbthread.h from darwin-nat.h gave these errors:
/Users/simark/src/binutils-gdb/gdb/gdbthread.h:609:3: error: must use 'class' tag to refer to type 'thread_info' in this scope
thread_info *m_thread;
^
class
/usr/include/mach/thread_act.h:240:15: note: class 'thread_info' is hidden by a non-type declaration of 'thread_info' here
kern_return_t thread_info
^
It turns out that there is a thread_info function in the Darwin/XNU/mach API:
http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/thread_info.html
Therefore, I had to add the class keyword at a couple of places in gdbthread.h,
I don't really see a way around it.
gdb/ChangeLog:
* gdbthread.h (private_thread_info): Define structure type, add
virtual pure destructor.
(thread_info) <priv>: Change type to unique_ptr.
<private_dtor>: Remove.
* thread.c (add_thread_with_info): Adjust to use of unique_ptr.
(private_thread_info::~private_thread_info): Provide default
implementation.
(thread_info::~thread_info): Don't call private_dtor nor
manually free priv.
* aix-thread.c (private_thread_info): Rename to ...
(aix_thread_info): ... this.
(get_aix_thread_info): New.
(sync_threadlists): Adjust.
(iter_tid): Adjust.
(aix_thread_resume): Adjust.
(aix_thread_fetch_registers): Adjust.
(aix_thread_store_registers): Adjust.
(aix_thread_extra_thread_info): Adjust.
* darwin-nat.h (private_thread_info): Rename to ...
(darwin_thread_info): ... this.
(get_darwin_thread_info): New.
* darwin-nat.c (darwin_init_thread_list): Adjust.
(darwin_check_new_threads): Adjust.
(thread_info_from_private_thread_info): Adjust.
* linux-thread-db.c (private_thread_info): Rename to ...
(thread_db_thread_info): ... this, initialize fields.
(get_thread_db_thread_info): New.
<dying>: Change type to bool.
(update_thread_state): Adjust to type rename.
(record_thread): Adjust to type rename an use of unique_ptr.
(thread_db_pid_to_str): Likewise.
(thread_db_extra_thread_info): Likewise.
(thread_db_thread_handle_to_thread_info): Likewise.
(thread_db_get_thread_local_address): Likewise.
* nto-tdep.h (private_thread_info): Rename to ...
(nto_thread_info): ... this, initialize fields.
(get_nto_thread_info): New.
<name>: Change type to std::string.
* nto-tdep.c (nto_extra_thread_info): Adjust to type rename and
use of unique_ptr.
* nto-procfs.c (update_thread_private_data_name): Adjust to
std::string change, allocate nto_private_thread_info with new.
(update_thread_private_data): Adjust to unique_ptr.
* remote.c (private_thread_info): Rename to ...
(remote_thread_info): ... this, initialize data members with
default values.
<extra, name>: Change type to std::string.
<thread_handle>: Change type to non-pointer.
(free_private_thread_info): Remove.
(get_private_info_thread): Rename to...
(get_remote_thread_info): ... this, change return type, adjust to
use of unique_ptr, use remote_thread_info constructor.
(remote_add_thread): Adjust.
(get_private_info_ptid): Rename to...
(get_remote_thread_info): ...this, change return type.
(remote_thread_name): Use get_remote_thread_info, adjust to
change to std::string.
(struct thread_item) <~thread_item>: Remove.
<thread_handle>: Make non pointer.
(start_thread): Adjust to thread_item::thread_handle type
change.
(remote_update_thread_list): Adjust to type name change, move
strings from temporary to long-lived object instead of
duplicating.
(remote_threads_extra_info): Use get_remote_thread_info.
(process_initial_stop_replies): Likewise.
(resume_clear_thread_private_info): Likewise.
(remote_resume): Adjust to type name change.
(remote_commit_resume): Use get_remote_thread_info.
(process_stop_reply): Adjust to type name change.
(remote_stopped_by_sw_breakpoint): Use get_remote_thread_info.
(remote_stopped_by_hw_breakpoint): Likewise.
(remote_stopped_by_watchpoint): Likewise.
(remote_stopped_data_address): Likewise.
(remote_core_of_thread): Likewise.
(remote_thread_handle_to_thread_info): Use
get_private_info_thread, adjust to thread_handle field type
change.
This changes gdb_realpath to return a unique_xmalloc_ptr and fixes up
the callers. This allows removing some cleanups. This change by
itself caused xfullpath.exp to fail; and attempting to fix that ran
into various problems (like .get() being optimized out); so this patch
also rewrites xfullpath.exp to be a C++ selftest instead.
ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* exec.c (exec_file_attach): Update.
* linux-thread-db.c (try_thread_db_load): Update.
* guile/scm-safe-call.c (gdbscm_safe_source_script): Update.
* utils.c (gdb_realpath): Change return type.
(gdb_realpath_keepfile): Update.
(gdb_realpath_check_trailer, gdb_realpath_tests): New functions.
(_initialize_utils): Register the new self test.
* source.c (openp): Update.
(find_and_open_source): Update.
* nto-tdep.c (nto_find_and_open_solib): Update.
* main.c (set_gdb_data_directory): Update.
(captured_main_1): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update
(dw2_map_symbol_filenames): Update.
* auto-load.c (auto_load_safe_path_vec_update): Update.
(filename_is_in_auto_load_safe_path_vec): Change type of
"filename_realp".
(auto_load_objfile_script): Update.
(file_is_auto_load_safe): Update. Use std::string.
* utils.h (gdb_realpath): Return a gdb::unique_xmalloc_ptr.
testsuite/ChangeLog
2017-08-22 Tom Tromey <tom@tromey.com>
* gdb.gdb/xfullpath.exp: Remove.
The lm_info structure is used to store target specific information about
mapped libraries. It is currently defined as an opaque type in solist.h
and a pointer to it is included in solist, the target-agnostic object
representing a loaded shared library. Multiple targets define their own
implementation of lm_info.
In anticipation of using C++ stuff (e.g. vector) in the lm_info objects,
we first need to avoid different definitions of classes with the same
name (which violates the one definition rule). This patch does it by
having a base class (lm_info_base) from which all the specific lm_info
derive. Each implementation is renamed to something that makes sense
(e.g. lm_info_aix for AIX). The next logical step would probably be to
derive directly from so_list, it's not really obvious, so I'll keep that
for another day.
One special case is the Neutrino (nto) support. It uses SVR4-style
libraries, but overrides some methods. To do that, it needed to have
its own copy of SVR4's lm_info structure in nto-tdep.c, because it was
just not possible to put it in solib-svr4.h and include that file. Over
time, that copy got out of sync, which is still the case today. I can
only assume that the lm_addr function in nto-tdep.c is broken right now.
The first field of the old lm_info was a pointer (gdb_byte *), whereas
in the new lm_info it's an address in the inferior (CORE_ADDR). Trying
to use that field today probably results in a crash. With this
refactor, it's now possible to put lm_info_svr4 in solib-svr4.h and just
include it. I have adapted the code in nto-tdep.c to that it builds,
but it's probably not correct. Since I don't have the knowledge nor
setup to try this on Neutrino, somebody else would have to fix it. But
I am confident that I am not making things worse than they already are.
gdb/ChangeLog:
* solist.h (struct lm_info): Remove.
(struct lm_info_base): New class.
(struct so_list) <lm_info>: Change type to lm_info_base *.
* nto-tdep.c (struct lm_info): Remove.
(lm_addr): Adjust.
* solib-aix.c (struct lm_info): Rename to ...
(struct lm_info_aix): ... this. Extend lm_info_base.
(lm_info_p): Rename to ...
(lm_info_aix_p): ... this, and adjust.
(solib_aix_new_lm_info, solib_aix_xfree_lm_info,
solib_aix_parse_libraries, library_list_start_library,
solib_aix_free_library_list, solib_aix_parse_libraries,
solib_aix_get_library_list,
solib_aix_relocate_section_addresses, solib_aix_free_so,
solib_aix_get_section_offsets,
solib_aix_solib_create_inferior_hook, solib_aix_current_sos):
Adjust.
(struct solib_aix_inferior_data) <library_list>: Adjust.
* solib-darwin.c (struct lm_info): Rename to ...
(struct lm_info_darwin): ... this. Extend lm_info_base.
(darwin_current_sos, darwin_relocate_section_addresses): Adjust.
* solib-dsbt.c (struct lm_info): Rename to ...
(struct lm_info_dsbt): ... this. Extend lm_info_base.
(struct dsbt_info) <main_executable_lm_info): Adjust.
(dsbt_current_sos, dsbt_relocate_main_executable, dsbt_free_so,
dsbt_relocate_section_addresses): Adjust.
* solib-frv.c (struct lm_info): Rename to ...
(struct lm_info_frv): ... this. Extend lm_info_base.
(main_executable_lm_info): Adjust.
(frv_current_sos, frv_relocate_main_executable, frv_free_so,
frv_relocate_section_addresses, frv_fdpic_find_global_pointer,
find_canonical_descriptor_in_load_object,
frv_fdpic_find_canonical_descriptor): Adjust.
* solib-svr4.c (struct lm_info): Move to solib-svr4.h, renamed
to lm_info_svr4.
(lm_info_read, lm_addr_check, svr4_keep_data_in_core,
svr4_clear_so, svr4_copy_library_list,
library_list_start_library, svr4_default_sos, svr4_read_so_list,
svr4_current_sos, svr4_fetch_objfile_link_map,
solist_update_incremental): Adjust.
* solib-svr4.h (struct lm_info_svr4): Move here from
solib-svr4.c.
* solib-target.c (struct lm_info): Rename to ...
(struct lm_info_target): ... this. Extend lm_info_base.
(lm_info_p): Rename to ...
(lm_info_target_p): ... this.
(solib_target_parse_libraries, library_list_start_segment,
library_list_start_section, library_list_start_library,
library_list_end_library, solib_target_free_library_list,
solib_target_current_sos, solib_target_free_so,
solib_target_relocate_section_addresses): Adjust.
* windows-nat.c (struct lm_info): Rename to ...
(struct lm_info_windows): ... this. Extend lm_info_base.
(windows_make_so, handle_load_dll, handle_unload_dll,
windows_xfer_shared_libraries): Adjust.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Use qnx specific notes to figure out the OS.
gdb/ChangeLog:
* gdb/nto-tdep.c (QNX_NOTE_NAME, QNX_INFO_SECT_NAME): New defines.
(nto_sniff_abi_note_section): New function.
(nto_elf_osabi_sniffer): Use new function to recognize nto specific
binary.
Fix 'stopped by watchpoint' detection: add inferior data, use inferior data
for storing last stopped flags needed for detection.
gdb/ChangeLog:
* nto-procfs.c (procfs_wait): Set stopped_flags nad stopped_pc.
(procfs_stopped_by_watchpoint): Use flags stored in inferior data.
* nto-tdep.c (nto_new_inferior_data_reg): New definition.
(nto_new_inferior_data, nto_inferior_data_cleanup, nto_inferior_data):
New functions.
(_initialize_nto_tdep): New forward declaration, new function.
* nto-tdep.h (struct nto_inferior_data): New struct.
(nto_inferior_data): New function declaration.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
gdb/
2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
* cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
variable search_flags.
* defs.h (OPF_DISABLE_REALPATH): Rename to ...
(OPF_RETURN_REALPATH): ... here.
* dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
* exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
call. Twice.
* nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
openp call.
* solib.c (solib_find): Likewise. Four times.
* source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
in the function comment and for the realpath_fptr variable.
(source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
(find_and_open_source): Likewise. Twice.
* symfile.c (symfile_bfd_open): Likewise, also twice.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* nto-tdep.c (LM_ADDR): Rename to...
(lm_addr): New function name.
(nto_relocate_section_addresses): Adapt to change above.
* solib-sunos.c (LM_ADDR): Rename to...
(lm_addr): New function name.
(LM_NEXT): Rename to...
(lm_next): New function name.
(sunos_current_sos, sunos_relocate_section_addresses): Adapt to
function name changes above.
* solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Rename to...
(lm_addr_from_link_map): New function name.
(HAS_LM_DYNAMIC_FROM_LINK_MAP): Rename to...
(has_lm_dynamic_from_link_map): New function name.
(LM_DYNAMIC_FROM_LINK_MAP): Rename to...
(lm_dynamic_from_link_map): New function name.
(LM_ADDR_CHECK): Rename to...
(lm_addr_check): New function name.
(LM_NEXT): Rename to...
(lm_next): New function name.
(LM_PREV): Rename to...
(lm_prev): New function name.
(LM_NAME): Rename to...
(lm_name): New function name.
(IGNORE_FIRST_LINK_MAP_ENTRY): Rename to...
(ignore_first_link_map_entry): New function name.
(svr4_keep_data_in_core): Adapt to function name changes above.
(svr4_current_sos): Likewise.
(enable_break): Likewise.
(svr4_relocate_section_addresses): Likewise.
Joel Brobecker