* gdb.trace/backtrace.exp: Don't invoke 'get_exit' and
'gdb_start'.
Invoke 'prepare_for_testing' instead of 'gdb_compile'.
Use gdb_test_no_output to issue commands 'tstart' and 'tstop'.
http://sourceware.org/ml/gdb-patches/2013-07/msg00317.html
gdb/ChangeLog
* value.c (value_fetch_lazy): Mark optimized out values as such
rather than raising an error.
gdb/testsuite/ChangeLog
* gdb.dwarf2/pieces-optimized-out.exp: Expect "<optimized out>"
when printing an optimized out value. Expect an error when using
an optimized out value in an expression.
http://sourceware.org/ml/gdb-patches/2013-07/msg00316.html
gdb/ChangeLog
* value.c (value_fetch_lazy): Ensure parent value is not lazy
before checking which bits of the parent, not the child, value are
valid.
gdb/testsuite/ChangeLog
* gdb.dwarf2/pieces-optimized-out.exp: New file.
* gdb.dwarf2/pieces-optimized-out.c: New file.
* gdb.dwarf2/pieces-optimized-out.S: New file.
PR gdb/15715
* top.c: Include "filenames.h".
(set_history_filename): New function.
(init_main): Install it as set hook of the "set history filename"
command.
2013-07-30 Muhammad Bilal <mbilal@codesourcery.com>
PR gdb/15715
* gdb.base/setshow.exp: Test that relative paths passed to
'set history filename' are converted to absolute paths.
* Makefile.in (SFILES): Add common/mips-linux-watch.c.
(mips-linux-watch.o): New rule.
(mips_linux_watch_h): New variable.
* configure.srv <mips*-*-linux*>: Add mips-linux-watch.o to
srv_tgtobj.
* linux-mips-low.c: Include mips-linux-watch.h.
(struct arch_process_info, struct arch_lwp_info): New.
(update_watch_registers_callback): New function.
(mips_linux_new_process, mips_linux_new_thread) New functions.
(mips_linux_prepare_to_resume, mips_insert_point): New
functions.
(mips_remove_point, mips_stopped_by_watchpoint): New
functions.
(rsp_bp_type_to_target_hw_bp_type): New function.
(mips_stopped_data_address): New function.
(the_low_target): Add watchpoint support functions.
gdb/
* NEWS: Mention that GDBserver now supports hardware
watchpoints on the MIPS GNU/Linux target.
* mips-linux-nat.c (get_irw_mask): Rename to ...
(mips_linux_watch_get_irw_mask): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(get_reg_mask): Rename parameter 'set' to 'n'. Update
function comment. All callers changed.
(get_num_valid): Rename to ...
(mips_linux_watch_get_num_valid): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(get_watchlo): Rename to ...
(mips_linux_watch_get_watchlo): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(set_watchlo): Rename to ...
(mips_linux_watch_set_watchlo): ... this. Rename parameter
'set' to 'n'. Update function comment. All callers changed.
(get_watchhi): Rename to ...
(mips_linux_watch_get_watchhi): ... this. Update function
comment. All callers changed.
(set_watchhi): Rename to ...
(mips_linux_watch_set_watchhi): ... this. Update function
comment. All callers changed.
(mips_linux_read_watch_registers): Update function comment.
Add new parameters 'lwpid', 'watch_readback', and
'watch_readback_valid'. Update.
(type_to_irw): Rename to ...
(mips_linux_watch_type_to_irw): ... this. Update function
comment. All callers changed.
(fill_mask): Update function comment.
(try_one_watch): Rename to ...
(mips_linux_watch_try_one_watch): ... this. Change the type
of parameter 'irw' from 'unsigned' to 'uint32_t'.
(populate_regs_from_watches): Rename to ...
(mips_linux_watch_populate_regs): ... this. Add parameter
'current_watches'. All callers changed.
of f77.
Allow for compiler variations of integer types.
Use mi_create_varobj.
Use mi_list_varobj_children for the immediate children of `array'.
Add "has_more" attribute for grandchildren test.
When GDB is run with IO redirected to a pipe, the 'interrupt' command
causes it to kill its own process group instead of the inferior's.
The problem manifests itself in async mode, native debugging:
$ cat | gdb <file>
(gdb) set target-async on
(gdb) run &
(gdb) interrupt
A debugging session is active.
Inferior 1 [process 20584] will be killed.
Quit anyway? (y or n) [answered Y; input not from terminal]
In this case, GDB tells that its stdin isn't a tty and doesn't save
the inferior's process group in
inflow.c:terminal_init_inferior_with_pgrp. The 'interrupt' command
tries to 'kill' the inferior's process group in
`inf-ptrace.c:inf_ptrace_stop`, but since that wasn't saved in the
first place, GDB kills process group 0, meaning, its own process
group.
When GDB is used from a frontend, that means killing its own process
group including the frontend and possibly the X session. This was
originally seen with SublimeGDB:
https://github.com/quarnster/SublimeGDB/issues/29.
The patch makes GDB save the inferior pgid regardless of having a
terminal, as pgid is used not only to reset foreground process group,
but also to interrupt the inferior process. It also adds a regression
test. Luckily, we can emulate not having a terminal with "set
interactive-mode off", avoiding the need of special magic to spawn gdb
with a pipe.
Tested on x86_64 Fedora 17.
gdb/
2013-07-26 Cyril Nikolaev <cyril@nichtverstehen.de>
* inflow.c (terminal_init_inferior_with_pgrp): Save inferior
process group regardless of having tty on stdin.
gdb/testsuite/
2013-07-26 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt-noterm.c, gdb.base/interrupt-noterm.exp: New
files.
This patch fixes the target double-close problem (PR remote/15266),
and in the process removes pop_target entire (PR remote/15256).
The first issue is that pop_target calls target_close. However, it
then calls unpush_target, which also calls target_close. This means
targets must be able to be closed twice. Not only is this strange,
but it also directly contradicts the contract of to_xclose targets.
(We currently have just a single such target, and it is never pushed;
but I plan to add more, and so this latent bug is triggered.)
The second issue is that it seems to me that calling pop_target is
often unsafe. This is what cropped up in 15256, where the remote
target assumed that it could pop_target -- but there was another
target higher on the stack, leading to confusion.
But, it is always just as easy to call unpush_target as it is to call
pop_target; and it is also safer. So, removing pop_target seemed like
an improvement.
Finally, this adds an assertion to target_close to ensure that no
currently-pushed target can be closed.
Built and regtested on x86-64 Fedora 18; both natively and using the
native-gdbserver board file.
PR remote/15256, PR remote/15266:
* bfd-target.c (target_bfd_reopen): Initialize to_magic.
* monitor.c (monitor_detach): Use unpush_target.
* remote-m32r-sdi.c (m32r_detach): Use unpush_target.
* remote-mips.c (mips_detach): Use unpush_target. Don't
call mips_close.
* remote-sim.c (gdbsim_detach): Use unpush_target.
* target.c (pop_target): Remove.
(pop_all_targets_above): Don't call target_close.
(target_close): Assert that the target is unpushed.
* target.h (pop_target): Don't declare.
* tracepoint.c (tfile_open): Use unpush_target.
Right now, "help target" will include this line:
target multi-thread -- Threads and pthreads support
However, it doesn't make sense to invoke "target multi-thread".
This patch fixes the problem by not registering the multi-thread
target. add_target does some needed initialization of the target_ops,
so I broke this out into a new function.
It isn't clear to me whether this patch requires a test case or not.
I'm not sure whether there are other unregistered targets; but if
there are, it seems unlikely that we test for their absence from the
help.
Built and regtested on x86-64 Fedora 18.
* linux-thread-db.c (init_thread_db_ops): Call
complete_target_initialization.
(_initialize_thread_db): Don't call add_target.
* target.c (complete_target_initialization): New function.
(add_target_with_completer): Call it.
* target.h (complete_target_initialization): Declare.
* hppa-tdep.h (enum hppa_regnum): Add members for all space registers.
* hppaobsd-tdep.c (HPPAOBSD_SIZEOF_GREGS): Add comment.
(HPPANBSD_SIZEOF_GREGS): New define.
(hppaobsd_supply_gregset): Handle additional registers.
* hppabsd-nat.c (hppabsd_gregset_supplies_p): Adjust to indicate
we provide more registers now.
(hppabsd_supply_gregset): Supply additional registers.
(hppabsd_collect_gregset): Collect additional registers.
http://sourceware.org/ml/gdb-patches/2013-07/msg00236.html
gdb/ChangeLog
* mi/mi-main.c (output_register): Make MI 'r' format use standard
'z' format code. Remove error for optimized out values, standard
code will handle these fine.
gdb/testsuite/ChangeLog
* gdb.mi/mi-reg-undefined.exp: New file.
* gdb.mi/mi-reg-undefined.c: Likewise.
* gdb.mi/mi-reg-undefined.S: Likewise.
http://sourceware.org/ml/gdb-patches/2013-07/msg00235.html
gdb/ChangeLog
* NEWS: Mention new 'z' formatter.
* printcmd.c (print_scalar_formatted): Add new 'z' formatter.
(_initialize_printcmd): Mention 'z' formatter in help text of the
'x' command.
gdb/doc/ChangeLog
* gdb.texinfo (Output Formats): Mention the new 'z' formatter.
gdb/testsuite/ChangeLog
* gdb.base/printcmds.exp (test_print_int_arrays): Add tests for x,
z, o, and t output formats.
* gdb.base/display.exp: Use 'k' as an undefined format now that
'z' is defined.
* breakpoint.c (create_longjmp_master_breakpoint): Check if probe
interface can evaluate arguments. Fallback to the old mode if it
cannot.
(create_exception_master_breakpoint): Likewise.
* elfread.c (elf_can_evaluate_probe_arguments): New function.
(struct sym_probe_fns elf_probe_fns): Export function above to the
probe interface.
* probe.c (can_evaluate_probe_arguments): New function.
* probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New
function pointer.
(can_evaluate_probe_arguments): New function prototype.
* solib-svr4.c (svr4_create_solib_event_breakpoints): Check if
probe interface can evaluate arguments. Fallback to the old mode
if it cannot.
* stap-probe.c (stap_get_probe_argument_count): Check if probe
interface can evaluate arguments. Warning the user if it cannot.
(stap_can_evaluate_probe_arguments): New function.
(struct probe_ops stap_probe_ops): Export function above to the
probe interface.
* symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>:
New function pointer.
* gdb.mi/mi-var-cmd.exp: If host is remote, use ${testfile} on
host.
* gdb.mi/mi-basics.exp (test_exec_and_symbol_mi_operatons):
Likewise. If host is remote, copy ${binfile} to host.
init_cutu_and_read_dies creates an outer cleanup and uses its
immediately nested inner cleanup conditionally. This seems overly
complicated to me; simpler is to just deal with the outer cleanup and
drop the inner one. That is what this patch implements.
* dwarf2read.c (init_cutu_and_read_dies): Remove 'free_cu_cleanup'.
Simplify cleanup handling.
dwarf_decode_line_header has one return that is missing a call to
do_cleanups. This patch adds it.
This was found using the cleanup checker.
* dwarf2read.c (dwarf_decode_line_header): Call do_cleanups
on all return paths.
* ppc-linux-nat.c (PPC_DEBUG_FEATURE_DATA_BP_DAWR): New define.
(ppc_linux_region_ok_for_hw_watchpoint): Add checking to use the new
DAWR interface for longer ranges hardware watchpoint (up to 512 bytes).
disp-step-syscall.exp is not run for ARM targets because ARM syscall
instructions have not been added to the list of possible syscall
instructions. This patch adds ARM syscall instructions to enable
disp-step-syscall.exp tests for ARM targets. Attached patch is tested
on ARMv7 and helps pass all disp-step-syscall.exp tests for ARM
targets.
gdb/testsuite/ChangeLog:
2013-07-19 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.base/disp-step-syscall.exp: Add svc and swi syscall
instructions and enable disp-step-syscall for arm targets.
The ARM assembler recognises @ symbol as a comment marker and
therefore is unable to assemble some of gdb.dwarf2 testsuite tests.
This patch replaces all occurrences of @ symbol with % sign to allow
tests stay compatible with both ARM and x86 assembly. This patch has
been tested on x86_64 and ARMv7 targets.
gdb/testsuite/ChangeLog:
2013-07-19 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/fission-reread.S: Replace @ sign with % sign to remove
assembler errors on arm.
* gdb.dwarf2/mac-fileno.S: Likewise.
* gdb.dwarf2/member-ptr-forwardref.S: Likewise.
* gdb.dwarf2/pr13961.S: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Pass the tail name of
$dest to link options if host is remote. Move the
generated file to $dest.a on host if host is remote.
On Ubuntu by default the compiler passes --as-needed to ld which
means no DT_NEEDED entry is added for libpthread when building
the TLS tests. This causes the test to fail as libpthread is
required to look up TLS variables. Add calls to pthread_testcancel
to make sure libpthread gets linked.
gdb/testsuite/ChangeLog:
2013-07-18 Will Newton <will.newton@linaro.org>
* gdb.threads/tls-nodebug.c: Call pthread_testcancel
to ensure the test is linked against pthreads.
* gdb.threads/tls-var-main.c: Likewise.
* gdb.threads/tls-shared.c: Likewise.
