Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
Make use of the default gdbarch methods for gdbarch_dummy_id,
gdbarch_unwind_pc, and gdbarch_unwind_sp where possible.
I have not tested this change but, by inspecting the code, I believe
the default methods are equivalent to the code being deleted.
gdb/ChangeLog:
* sh-tdep.c (sh_unwind_sp): Delete.
(sh_unwind_pc): Delete.
(sh_dummy_id): Delete.
(sh_gdbarch_init): Don't register deleted functions with
gdbarch.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
In the existing code, when using the regset section iteration functions, the
size parameter is used in different ways.
With collect, size is used to create the buffer in which to write the regset.
(see linux-tdep.c::linux_collect_regset_section_cb).
With supply, size is used to confirm the existing regset is the correct size.
If REGSET_VARIABLE_SIZE is set then the regset can be bigger than size.
Effectively, size is the minimum possible size of the regset.
(see corelow.c::get_core_register_section).
There are currently no targets with both REGSET_VARIABLE_SIZE and a collect
function.
In SVE, a corefile can contain one of two formats after the header, both of
which are different sizes. However, when writing a core file, we always want
to write out the full bigger size.
To allow support of collects for REGSET_VARIABLE_SIZE we need two sizes.
This is done by adding supply_size and collect_size.
gdb/
* aarch64-fbsd-tdep.c
(aarch64_fbsd_iterate_over_regset_sections): Add supply_size and
collect_size.
* aarch64-linux-tdep.c
(aarch64_linux_iterate_over_regset_sections): Likewise.
* alpha-linux-tdep.c
(alpha_linux_iterate_over_regset_sections):
* alpha-nbsd-tdep.c
(alphanbsd_iterate_over_regset_sections): Likewise.
* amd64-fbsd-tdep.c
(amd64fbsd_iterate_over_regset_sections): Likewise.
* amd64-linux-tdep.c
(amd64_linux_iterate_over_regset_sections): Likewise.
* arm-bsd-tdep.c
(armbsd_iterate_over_regset_sections): Likewise.
* arm-fbsd-tdep.c
(arm_fbsd_iterate_over_regset_sections): Likewise.
* arm-linux-tdep.c
(arm_linux_iterate_over_regset_sections): Likewise.
* corelow.c (get_core_registers_cb): Likewise.
(core_target::fetch_registers): Likewise.
* fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
* frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise.
* gdbarch.h (void): Regenerate.
* gdbarch.sh: Add supply_size and collect_size.
* hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise.
* hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise.
* hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise.
* i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise.
* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise.
* i386-tdep.c (i386_iterate_over_regset_sections): Likewise.
* ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise.
* linux-tdep.c (linux_collect_regset_section_cb): Likewise.
* m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise.
* m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise.
* m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise.
* mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise.
* mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise.
* mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections): Likewise.
* mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise.
* nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise.
* ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise.
* ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise.
* ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise.
* ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise.
* riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise.
* s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise.
* score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise.
* sh-tdep.c (sh_iterate_over_regset_sections): Likewise.
* sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise.
* tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise.
* vax-tdep.c (vax_iterate_over_regset_sections): Likewise.
* xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.
Remove regcache_raw_write, update all callers to use regcache::raw_write
instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_write): Remove, update callers to use
regcache::raw_write instead.
* regcache.c (regcache_raw_write): Remove.
Remove regcache_raw_read, update all callers to use
readable_regcache::raw_read instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_read): Remove, update callers to use
readable_regcache::raw_read instead.
* regcache.c (regcache_raw_read): Remove.
Since bfd dropped support for SH-5, there's no point in keeping it in
GDB either.
This restores --enable-targets=all builds.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS (sh): Remove.
* Makefile.in (ALL_TARGET_OBS): Remove sh64-tdep.o.
(HFILES_NO_SRCDIR): Remove sh64-tdep.h.
(ALLDEPFILES): Remove sh64-tdep.c.
* NEWS: Mentions that support for SH-5/SH64 is removed.
* configure.tgt (sh*-*-linux*): Remove reference to sh64-tdep.o.
(sh*-*-openbsd*): Ditto.
(sh64-*-elf*): Remove.
(sh*): Remove.
* regcache.c (cooked_write_test): Remove bfd_mach_sh5 case.
* sh-linux-tdep.c: Remove reference to bfd_mach_sh5.
* sh-tdep.c: No longer include "sh64-tdep.h".
(sh_gdbarch_init): Remove reference to bfd_mach_sh5.
* sh64-tdep.c, sh64-tdep.h: Remove files.
pseudo registers are either from raw registers or memory, so
gdbarch methods pseudo_register_read and pseudo_register_read_value
should have regcache object which only have read methods. In other
words, we should disallow writing to regcache in these two gdbarch
methods. In order to apply this restriction, this patch adds a new
class readable_regcache, derived from reg_buffer, and it only has
raw_read and cooked_read methods. regcache is derived from
readable_regcache. This patch also passes readable_regcache instead of
regcache to gdbarch methods pseudo_register_read and
pseudo_register_read_value.
This patch moves raw_read* and cooked_read* methods to readable_regcache,
which is straightforward. One thing not straightforward is that I split
regcache::xfer_part to readable_regcache::read_part and regcache::write_part,
because readable_regcache can only have methods to read.
readable_regcache is an abstract base class, and it has a pure virtual
function raw_update, because I don't want readable_regcache know where
these raw registers are from. They can be from either the target
(readwrite regcache) or the regcache itself (readonly regcache).
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_register_read_value): Change
parameter type to 'readable_regcache *'.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
(arm_pseudo_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* gdbarch.c: Re-generated.
* gdbarch.h: Re-generated.
* gdbarch.sh (pseudo_register_read): Change parameter type to
'readable_regcache *'.
(pseudo_register_read_value): Likewise.
* h8300-tdep.c (pseudo_from_raw_register): Likewise.
(h8300_pseudo_register_read): Likewise.
* hppa-tdep.c (hppa_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
(i386_pseudo_register_read_value): Likewise.
* i386-tdep.h (i386_pseudo_register_read_into_value): Update
declaration.
* ia64-tdep.c (ia64_pseudo_register_read): Likewise.
* m32c-tdep.c (m32c_raw_read): Likewise.
(m32c_read_flg): Likewise.
(m32c_banked_register): Likewise.
(m32c_banked_read): Likewise.
(m32c_sb_read): Likewise.
(m32c_part_read): Likewise.
(m32c_cat_read): Likewise.
(m32c_r3r2r1r0_read): Likewise.
(m32c_pseudo_register_read): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_register_read): Likewise.
* mips-tdep.c (mips_pseudo_register_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* regcache.c (regcache::raw_read): Move it to readable_regcache.
(regcache::cooked_read): Likewise.
(regcache::cooked_read_value): Likewise.
(regcache_cooked_read_signed):
(regcache::cooked_read): Likewise.
* regcache.h (readable_regcache): New class.
(regcache): Inherit readable_regcache. Move some methods to
readable_regcache.
* rl78-tdep.c (rl78_pseudo_register_read): Change
parameter type to 'readable_regcache *'.
* rs6000-tdep.c (do_regcache_raw_read): Remove.
(e500_pseudo_register_read): Change parameter type to
'readable_regcache *'.
(dfp_pseudo_register_read): Likewise.
(vsx_pseudo_register_read): Likewise.
(efpr_pseudo_register_read): Likewise.
* s390-tdep.c (s390_pseudo_register_read): Likewise.
* sh-tdep.c (sh_pseudo_register_read): Likewise.
* sh64-tdep.c (pseudo_register_read_portions): Likewise.
(sh64_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
(spu_pseudo_register_read): Likewise.
* xtensa-tdep.c (xtensa_register_read_masked): Likewise.
(xtensa_pseudo_register_read): Likewise.
The patch later in this series will move regcache's raw_read and
cooked_read methods to a new class regcache_read, and regcache is
dervied from it. Also pass regcache_read instead of regcache to gdbarch
methods pseudo_register_read and pseudo_register_read_value. In order
to prepare for this change, this patch changes regcache_raw_read to
regcache->raw_read. On the other hand, since we are in C++, I prefer
using class method (regcache->raw_read).
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_read_value): Call regcache
method raw_read instead of regcache_raw_read.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* h8300-tdep.c (h8300_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* rl78-tdep.c (rl78_pseudo_register_read): Likewise.
* s390-linux-tdep.c (s390_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
This patch mechanically replaces convert_typed_floating with the
equivalent target_float_convert throughout tdep files, to prepare
for the removal of doublest.{c,h}.
No functional change intended.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* i386-tdep.c: Include "target-float.h". Do not include "doublest.h".
(i386_extract_return_value): Use target_float_convert.
(i386_store_return_value): Likewise.
* i387-tdep.c (i387_register_to_value): Use target_float_convert.
(i387_value_to_register): Likewise.
* ia64-tdep.c: Include "target-float.h". Do not include "doublest.h".
(ia64_register_to_value): Use target_float_convert.
(ia64_value_to_register): Likewise.
(ia64_extract_return_value): Likewise.
(ia64_store_return_value): Likewise.
(ia64_push_dummy_call): Likewise.
* m68k-tdep.c: Include "target-float.h".
(m68k_register_to_value): Use target_float_convert.
(m68k_value_to_register): Likewise.
(m68k_svr4_extract_return_value): Likewise.
(m68k_svr4_store_return_value): Likewise.
* ppc-sysv-tdep.c: Include "target-float.h".
(ppc_sysv_abi_push_dummy_call): Use target_float_convert.
(do_ppc_sysv_return_value): Likewise.
(ppc64_sysv_abi_push_freg): Likewise.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-aix-tdep.c: Include "target-float.h".
(rs6000_push_dummy_call): Use target_float_convert.
(rs6000_return_value): Likewise.
* rs6000-lynx178-tdep.c: Include "target-float.h".
(rs6000_lynx178_push_dummy_call): Use target_float_convert.
(rs6000_lynx178_return_value): Likewise.
* rs6000-tdep.c: Include "target-float.h". Do not include "doublest.h".
(rs6000_register_to_value): Use target_float_convert.
(rs6000_value_to_register): Likewise.
* arm-tdep.c: Include "target-float.h". Do not include "doublest.h".
(arm_extract_return_value): Use target_float_convert.
(arm_store_return_value): Likewise.
* sh-tdep.c: Include "target-float.h". Do not include "doublest.h".
(sh_register_convert_to_virtual): Use target_float_convert.
(sh_register_convert_to_raw): Likewise.
* sh64-tdep.c: Include "target-float.h".
(sh64_extract_return_value): Use target_float_convert.
(sh64_register_convert_to_virtual): Likewise.
(sh64_register_convert_to_raw): Likewise. Fix argument types.
Many tdep files need to perform conversions between two floating-point
types, usually when accessing FP registers. Most targets now use the
convert_typed_floating helper routine to do so. However, a small number
still use the old method of converting via a DOUBLEST. Since we want
to get rid of DOUBLEST, these targets need to be moved to the new
method as well.
The main obstacle is that for convert_typed_floating we need an actual
*type*, not just a floatformat.
In arm-tdep.c, this is very straightforward, since there is already a
type using the ARM extended floatformat.
For sh-tdep.c and sh64-tdep.c, no such type already exists, so I've
added one to the gdbarch_tdep struct as done on other targets.
gdb/ChangeLog
2017-09-27 Ulrich Weigand <uweigand@de.ibm.com>
* arm-tdep.c: (convert_from_extended): Remove.
(convert_to_extended): Likewise.
(arm_extract_return_value): Use convert_typed_floating.
(arm_store_return_value): Likewise.
* sh-tdep.h (struct gdbarch_tdep): Add sh_littlebyte_bigword_type.
* sh-tdep.c: Do not include "floatformat.h".
(sh_littlebyte_bigword_type): New function.
(sh_register_convert_to_virtual): Use convert_typed_floating.
(sh_register_convert_to_raw): Likewise.
* sh64-tdep.c: (struct gdbarch_tdep): Add sh_littlebyte_bigword_type.
(sh64_littlebyte_bigword_type): New function.
(sh64_extract_return_value): Use convert_typed_floating.
(sh64_register_convert_to_virtual): Likewise.
(sh64_register_convert_to_raw): Likewise.
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Both of them are used in conversion. We can remove them since the
conversion is done.
There are many architectures only have one breakpoint instruction,
so their gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind look very similar. Instead of macro, we
use template "template <size_t, const gdb_byte *> struct bp_manipulation"
for these architectures. In order to use template, I also change
breakpoint instruction of type "static const gdb_byte[]" to
"constexpr gdb_byte[]", and rename them to ARCH_break_insn.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change it to
constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c (break_insn): Rename to alpha_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(alpha_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c (arc_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation): New.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation_endian): New.
(BP_MANIPULATION): New.
(BP_MANIPULATION_ENDIAN): New.
* arm-tdep.c (arm_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* avr-tdep.c (avr_break_insn): Change it constexpr.
(avr_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(frv_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(ft32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(h8300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(hppa_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* i386-tdep.c (break_insn): Rename it to i386_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(i386_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* iq2000-tdep.c (iq2000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(lm32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m32c_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m88k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(mep_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* microblaze-tdep.c (break_insn): Rename it to
microblaze_break_insn and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(microblaze_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(mn10300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(moxie_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(msp430_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (break_insn): Rename it to nds32_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(nds32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
and change its type to rl78_break_insn. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rl78_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rs6000-tdep.c (big_breakpoint): Change its type to
constexpr.
(little_breakpoint): Likewise.
Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
(rs6000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rx-tdep.c (breakpoint): Rename it to rx_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION
(s390_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* score-tdep.c (score_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (break_insn): Rename it to sparc_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(sparc32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(spu_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(tilegx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (break_insn): Rename it to vax_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(vax_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xstormy16-tdep.c (breakpoint): Rename it to
xstormy16_break_insn and change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(xstormy16_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
This patch adds two gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind, and uses target_info.placed_size as "kind"
of the breakpoint. This patch updates the usages of
target_info.placed_size.
The "kind" of a breakpoint is determined by gdbarch rather than
target, so we have gdbarch method breakpoint_kind_from_pc, and we
should set target_info.placed_size out of each implementation of
target to_insert_breakpoint. In this way, each target doesn't have
to set target_info.placed_size any more.
This patch also sets target_info.placed_address before
target_insert_breakpoint too, so that target to_insert_breakpoint
can use it, see record_full_insert_breakpoint.
Before we call target_insert_breakpoint, we set
target_info.placed_address and target_info.placed_size like this,
CORE_ADDR addr = bl->target_info.reqstd_address;
bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr);
bl->target_info.placed_address = addr;
return target_insert_breakpoint (bl->gdbarch, &bl->target_info);
target_insert_breakpoint may fail, but it doesn't matter to the "kind"
and "placed_address" of a breakpoint. They should be determined by
gdbarch.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
breakpoint_kind_from_pc and sw_breakpoint_from_kind.
(GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
set_gdbarch_breakpoint_kind_from_pc and
set_gdbarch_sw_breakpoint_from_kind.
* arm-tdep.c: Add comments.
* bfin-tdep.c: Likewise.
* breakpoint.c (breakpoint_kind): New function.
(insert_bp_location): Set target_info.placed_size and
target_info.placed_address.
(bkpt_insert_location): Likewise.
* cris-tdep.c: Add comments.
* gdbarch.sh (breakpoint_kind_from_pc): New.
(sw_breakpoint_from_kind): New.
* gdbarch.c, gdbarch.h: Regenerated.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
(ia64_memory_remove_breakpoint): Don't assert
bp_tgt->placed_size.
(ia64_breakpoint_kind_from_pc): New function.
(ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
* mem-break.c (default_memory_insert_breakpoint): Don't set
bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind.
(default_memory_remove_breakpoint): Call
gdbarch_sw_breakpoint_from_kind.
(memory_validate_breakpoint): Don't check bp_tgt->placed_size.
* mips-tdep.c: Add comments.
* mt-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* record-full.c (record_full_insert_breakpoint): Don't call
gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address
and bp_tgt->placed_size.
* remote.c (remote_insert_breakpoint): Don't call
gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size.
Don't set bp_tgt->placed_address and bp_tgt->placed_size.
(remote_insert_hw_breakpoint): Likewise.
* score-tdep.c: Likewise.
* sh-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* v850-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
We concluded that gdbarch_in_function_epilogue_p is misnamed, since it
returns true if the given PC is one instruction after the one that
destroyed the stack (which isn't necessarily inside an epilogue),
therefore it should be renamed to stack_frame_destroyed_p.
I also took the liberty of renaming the arch-specific implementations to
*_stack_frame_destroyed_p as well for consistency.
gdb:
2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
* amd64-tdep.c: Replace in_function_epilogue_p with
stack_frame_destroyed_p throughout.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* arm-tdep.c: Ditto.
* breakpoint.c: Ditto.
* gdbarch.sh: Ditto.
* hppa-tdep.c: Ditto.
* i386-tdep.c: Ditto.
* mips-tdep.c: Ditto.
* nios2-tdep.c: Ditto.
* rs6000-tdep.c: Ditto.
* s390-linux-tdep.c: Ditto.
* score-tdep.c: Ditto.
* sh-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* tic6x-tdep.c: Ditto.
* tilegx-tdep.c: Ditto.
* xstormy16-tdep.c: Ditto.
* gdbarch.c, gdbarch.h: Re-generated.
For Super-H targets, no longer define the gdbarch method
'regset_from_core_section', but the iterator method instead.
gdb/ChangeLog:
* sh-linux-tdep.c (sh_linux_init_abi): Set tdep fields
'sizeof_gregset' and 'sizeof_fpregset'.
* sh-tdep.c (sh_regset_from_core_section): Remove.
(sh_iterate_over_regset_sections): New.
(sh_gdbarch_init): Adjust gdbarch initialization.
* sh-tdep.h (struct gdbarch_tdep): New fields sizeof_gregset and
sizeof_fpregset.
* shnbsd-tdep.c (shnbsd_init_abi): Set tdep field
'sizeof_gregset'.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* sh-tdep.c (sh_register_convert_to_virtual)
(sh_register_convert_to_raw): Add a gdbarch parameter. Update
all callers. Just do a memcpy if not the little-endian case.