This changes the GDB compile code to use std::vector<bool> when
computing which registers are used. This is a bit more idiomatic, but
the main benefit is that it also adds some checking when the libstd++
debug mode is enabled.
2021-01-23 Tom Tromey <tom@tromey.com>
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Change type of "registers_used".
* dwarf2/loc.h (dwarf2_compile_property_to_c): Update.
* dwarf2/loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Change
type of "registers_used".
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Update.
* compile/compile-loc2c.c (pushf_register_address)
(pushf_register, do_compile_dwarf_expr_to_c)
(compile_dwarf_expr_to_c, compile_dwarf_bounds_to_c): Change type
of "registers_used".
* compile/compile-c.h (generate_c_for_variable_locations):
Update.
* compile/compile-c-symbols.c (generate_vla_size)
(generate_c_for_for_one_variable): Change type of
"registers_used".
(generate_c_for_variable_locations): Return std::vector.
* compile/compile-c-support.c (generate_register_struct): Change
type of "registers_used".
(compute): Update.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
Since dwarf2_per_cu_data objects are going to become
objfile-independent, the backlink from dwarf2_per_cu_data to one
particular objfile must be removed. Instead, users of
dwarf2_per_cu_data that need an objfile must know from somewhere else in
the context of which objfile they are using this CU.
This also helps remove a dwarf2_per_cu_data::dwarf2_per_objfile
reference (from where the objfile was obtained).
Note that the dwarf2_per_cu_data::objfile method has a special case to
make sure to return the main objfile, if the objfile associated to the
dwarf2_per_cu_data is a separate debug objfile. I don't really know if
this is necessary: I ignored that, and didn't see any regression when
testing with the various Dejagnu boards with separate debug info, so I
presume it wasn't needed. If it turns out this was needed, then we can
have a helper method on the objfile type for that.
gdb/ChangeLog:
* dwarf2/read.h (struct dwarf2_per_cu_data) <objfile>: Remove.
* dwarf2/read.c (dwarf2_compute_name): Pass per_objfile down.
(read_call_site_scope): Assign per_objfile.
(dwarf2_per_cu_data::objfile): Remove.
* gdbtypes.h (struct call_site) <per_objfile>: New member.
* dwarf2/loc.h (dwarf2_evaluate_loc_desc): Add
dwarf2_per_objfile parameter.
* dwarf2/loc.c (dwarf2_evaluate_loc_desc_full): Add
dwarf2_per_objfile parameter.
(dwarf_expr_reg_to_entry_parameter): Add output
dwarf2_per_objfile parameter.
(locexpr_get_frame_base): Update.
(class dwarf_evaluate_loc_desc) <get_tls_address>: Update.
<push_dwarf_reg_entry_value>: Update.
<call_site_to_target_addr>: Update.
(dwarf_entry_parameter_to_value): Add dwarf2_per_objfile
parameter.
(value_of_dwarf_reg_entry): Update.
(rw_pieced_value): Update.
(indirect_synthetic_pointer): Update.
(dwarf2_evaluate_property): Update.
(dwarf2_loc_desc_get_symbol_read_needs): Add dwarf2_per_objfile
parameter.
(locexpr_read_variable): Update.
(locexpr_get_symbol_read_needs): Update.
(loclist_read_variable): Update.
Change-Id: Idb40d1a94995af305054d463967bb6ce11a08f25
Various DWARF callbacks expect to be able to fetch the objfile and / or
dwarf2_per_objfile from the DWARF CU object. However, this won't be
possible once sharing is implemented.
Because these objects are related to full symbols (e.g., they are used
to implement location expressions), they can simply store the
dwarf2_per_objfile they need.
This patch adds a per_objfile member to the various "baton" structures
and arranges to set this value when constructing the baton.
gdb/ChangeLog:
YYYY-MM-DD Tom Tromey <tom@tromey.com>
YYYY-MM-DD Simon Marchi <simon.marchi@efficios.com>
* dwarf2/loc.c (struct piece_closure) <per_objfile>: New member.
(allocate_piece_closure): Set "per_objfile" member.
(dwarf2_find_location_expression, dwarf2_locexpr_baton_eval)
(locexpr_describe_location, loclist_describe_location): Use new
member.
* dwarf2/read.c (read_call_site_scope)
(mark_common_block_symbol_computed, attr_to_dynamic_prop)
(dwarf2_const_value_attr, dwarf2_fetch_die_loc_sect_off)
(fill_in_loclist_baton, dwarf2_symbol_mark_computed,
handle_data_member_location): Set per_objfile member.
* dwarf2/loc.h (struct dwarf2_locexpr_baton) <per_objfile>: New
member.
(struct dwarf2_loclist_baton) <per_objfile>: New member.
Change-Id: If3aaa6a0f544be86710157c3adb68fde24d80037
When evaluating a DWARF expression, the dynamic type resolution code
will pass in a buffer of bytes via the property_addr_info. However,
the DWARF expression evaluator will then proceed to read memory from
the inferior, even when the request could be filled from this buffer.
This, in turn, is a problem in some cases; and specifically when
trying to handle the Ada scenario of extracting a variable-length
value from a packed array. Here, the ordinary DWARF expression cannot
be directly evaluated, because the data may appear at some arbitrary
bit offset. So, it is unpacked into a staging area and then the
expression is evaluated -- using an address of 0.
This patch fixes the problem by arranging for the DWARF evaluator, in
this case, to prefer passed-in memory when possible. The type of the
buffer in the property_addr_info is changed to an array_view so that
bounds checking can be done.
gdb/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_discrete_type_high_bound, ada_discrete_type_low)
(ada_value_primitive_packed_val): Update.
* ada-valprint.c (ada_value_print_1): Update.
* dwarf2/loc.c (evaluate_for_locexpr_baton): New struct.
(dwarf2_locexpr_baton_eval): Take a property_addr_info rather than
just an address. Use evaluate_for_locexpr_baton.
(dwarf2_evaluate_property): Update.
* dwarf2/loc.h (struct property_addr_info) <valaddr>: Now an
array_view.
* findvar.c (default_read_var_value): Update.
* gdbtypes.c (compute_variant_fields_inner)
(resolve_dynamic_type_internal): Update.
(resolve_dynamic_type): Change type of valaddr parameter.
* gdbtypes.h (resolve_dynamic_type): Update.
* valarith.c (value_subscripted_rvalue): Update.
* value.c (value_from_contents_and_address): Update.
Some DWARF expressions must be evaluated by first pushing the object
address onto the evaluation stack. This patch adds this ability.
This functionality is not used yet, but it will be used in a later
patch. This is split out for easier review and also because it
improved the patch series ordering.
gdb/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
* dwarf2/loc.c (dwarf2_locexpr_baton_eval): Add
"push_initial_value" parameter.
(dwarf2_evaluate_property): Likewise.
* dwarf2/loc.h (dwarf2_evaluate_property): Update.
dwarf2_evaluate_property should not modify its "addr_stack"
parameter's contents. This patch makes this part of the API, by
marking it const.
gdb/ChangeLog
2020-03-20 Tom Tromey <tromey@adacore.com>
* dwarf2/loc.h (dwarf2_evaluate_property): Make "addr_stack"
const.
* dwarf2/loc.c (dwarf2_evaluate_property): Make "addr_stack"
const.
All these functions have their implementations in dwarf2/read.c, so move
their declarations to dwarf2/read.h. Move the doc to the header, at the
same time.
gdb/ChangeLog:
* dwarf2/loc.h (dwarf2_fetch_die_loc_sect_off,
dwarf2_fetch_die_loc_cu_off, dwarf2_fetch_constant_bytes,
dwarf2_fetch_die_type_sect_off): Move to...
* dwarf2/read.h (dwarf2_fetch_die_loc_sect_off,
dwarf2_fetch_die_loc_cu_off, dwarf2_fetch_constant_bytes,
dwarf2_fetch_die_type_sect_off): ... here.
* dwarf2/read.c (dwarf2_fetch_die_loc_sect_off,
dwarf2_fetch_die_loc_cu_off, dwarf2_fetch_constant_bytes,
dwarf2_fetch_die_type_sect_off): Move doc to header file.
The implementation is in dwarf2/read.c, so the declaration belongs in
dwarf2/read.h. Also, move the documentation there.
gdb/ChangeLog:
* dwarf2/loc.h (dwarf2_read_addr_index): Move...
* dwarf2/read.h (dwarf2_read_addr_index): ... here.
* dwarf2/read.c (dwarf2_read_addr_index): Move doc to header.
Since its implementation is in dwarf2/read.c, its declaration belongs in
dwarf2/read.h. Move the documentation to the .h at the same time.
gdb/ChangeLog:
* loc.h (dwarf2_get_die_type): Move to...
* read.h (dwarf2_get_die_type): ... here.
* read.c (dwarf2_get_die_type): Move doc to header.
I noticed that dwarf2_compile_expr_to_ax can be static. Nothing
outside of loc.c calls it.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* dwarf2/loc.h (dwarf2_compile_expr_to_ax): Don't declare.
* dwarf2/loc.c (dwarf2_compile_expr_to_ax): Now static.
call_site_find_chain returns a pointer that the caller must
deallocate. It seemed better here to return a unique_xmalloc_ptr
instead.
gdb/ChangeLog
2020-02-14 Tom Tromey <tromey@adacore.com>
* dwarf2/frame-tailcall.c (dwarf2_tailcall_sniffer_first):
Update.
* dwarf2/loc.h (call_site_find_chain): Return unique_xmalloc_ptr.
* dwarf2/loc.c (call_site_find_chain_1): Return
unique_xmalloc_ptr.
(call_site_find_chain): Likewise.
