target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
Fix size of FPSCR in Power 7 processors.
* ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
(PPC_FEATURE_HAS_DFP): New #define.
(ppc_linux_read_description): Check for DFP feature instead of
ISA 2.05 to decide on size of the FPSCR.
gdbserver/
Fix size of FPSCR in Power 7 processors.
* linux-ppc-low.c (PPC_FEATURE_ARCH_2_05): Remove #define.
(PPC_FEATURE_HAS_DFP): New #define.
(ppc_arch_setup): Check for DFP feature instead of ISA 2.05 to decide on
size of the FPSCR.
(prologue-value.h): Include.
(mn10300_frame_unwind_cache, set_reg_offsets): Delete.
(struct mn10300_prologue): Define.
(push_reg, translate_rreg, check_for_saved): New functions.
(mn10300_analyze_prologue): Rewrite, using prologue-value
machinery. Handle more instructions than before. Permit
instructions to occur in any order.
(mn10300_skip_prologue): Find the extents of the function
in question; mn10300_analyze_prologue no longer does this.
(mn10300_analyze_frame_prologue): New function.
(mn10300_frame_base): New function.
(mn10300_frame_this_id): Rewrite, no longer using trad-frame
implementation.
(mn10300_frame_prev_register): Likewise.
(mn10300_frame_base_address, mn10300_frame_base struct): Delete.
(mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
`this_frame'.
(mn10300_frame_unwind_init): Don't call frame_base_set_default().
* gdb/completer.h (gdb_completion_word_break_characters): New function.
* gdb/completer.c: Include gdb_assert.h.
(complete_line_internal_reason): New enum.
(complete_line_internal): Change last argument type to
complete_line_internal_reason.
Modify function to handle the different complete_line_internal_reason
argument values.
(complete_line): Adapt to change in complete_line_internal.
(command_completer): Ditto.
(gdb_completion_word_break_characters): Implement new function.
* top.c (init_main): Set rl_completion_word_break_hook to
gdb_completion_word_break_characters.
dynamically loaded function.
(LookupPrivilegeValueA): Ditto.
(OpenProcessToken): Ditto.
(AdjustTokenPrivileges): Rename and define placeholder for address of
dynamically loaded function.
(LookupPrivilegeValueA): Ditto.
(OpenProcessToken): Ditto.
(set_process_privilege): Remove check for loaded functions.
(bad_OpenProcessToken): Define.
(_initialize_loadable): Load token functions from advapi here, setting
OpenProcessToken function to a dummy static function which always return error
if OS doesn't support this functionality.
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
gdb/doc/
* observer.texi (about_to_proceed): New.
* gdbint.texinfo (everywhere): Use braces {} in @deftypeXX type
field throughout to handle types with spaces in them. Fix typos
found by aspell.
(Summary, Requirements, Contributors): New first chapter,
"Summary" added, old Requirements section moved there, and new
section, "Contributors" added.
(Initializing a New Architecture, Register Representation)
(Frame Interpretation, Inferior Call Setup, Adding a New Target)
(Porting gdb): These sections extended and updated.
(Compiler Characteristics): This section (empty) deleted.
(Defining Other Architecture Features): This section renamed and
duplicate material removed from (formerly "Target Conditionals").
Use braces {} in @deftypeXX type field throughout to handle types
with spaces in them. Typos found by aspell fixed.
* stack_frame.svg: New file, source of image for gdbint.texinfo.
* stack_frame.pdf: Version of image for PDF output.
* stack_frame.png: Version of image for HTML output and for Emacs.
* stack_frame.txt: Version of image for Info output.
2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Jim Blandy <jimb@red-bean.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
Miscellaneous fixes to the Python code.
* python/python-cmd.c (cmdpy_init): Accept keyword
arguments.
* python/python-value.c (valpy_string): Accept keyword
arguments.
(valpy_binop): Use `break' to exit from the TRY_CATCH block.
Do not call value_to_value_object on NULL RES_VAL.
(value_object_methods): Change `string' entry to also accept
keyword arguments.
(convert_value_from_python): Return a copy of the value if obj is
a gdb.Value object.
(value_object_methods): Mark the `string' method as accepting
keywords, and show method "prototype" in the doc string.
* python/python.c (get_parameter): Don't return inside a
TRY_CATCH.
gdb/doc/
2009-03-21 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (Values From Inferior): Fix optional arguments
markup.
(Commands In Python): Adjust argument names of gdb.Command.__init__
to what the function accepts as keywords.
gdb/testsuite/
2009-03-21 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.python/python-cmd.exp: Add tests for keyword arguments.
* gdb.python/python-function.exp: Add test for function returning
a GDB value.
