nds32_elf_get_relocated_section_contents uses nds32_get_section_contents
to read sections contents, but nds32_get_section_contents has the wrong
behaviour as it calls bfd_malloc_and_get_section. That function always
mallocs its output buffer, whereas get_relocated_section_contents must
support an already allocated buffer.
bfd/
* elf32-nds32.c (nds32_get_section_contents): Replace
bfd_malloc_and_get_section with bfd_get_full_section_contents.
(nds32_elf_relax_delete_blanks): Init contents.
(nds32_elf_relax_section, nds32_relax_fp_as_gp): Likewise.
binutils/
* testsuite/binutils-all/compress.exp: Remove nds32 xfails.
* testsuite/binutils-all/objdump.exp: Likewise.
elfNN_bed was made writable as an expedient means of communicating
ld -z max-page-size and ld -z common-page-size values to BFD linker
code, and even for objcopy to communicate segment alignment between
copy_private_bfd_data, rewrite_elf_program_header and
assign_file_positions_for_load_sections. Some time later elfNN_bed
elf_osabi was written by gas. It turns out none of these
modifications to elfNN_bed was necessary, so make it const again.
include/
* bfdlink.h (struct bfd_link_info): Add maxpagesize and
commonpagesize.
bfd/
* elfxx-target.h (elfNN_bed): Constify.
* bfd.c (bfd_elf_set_pagesize): Delete.
(bfd_emul_set_maxpagesize, bfd_emul_set_commonpagesize): Delete.
* elf.c (get_program_header_size): Get commonpagesize from
link info.
(_bfd_elf_map_sections_to_segments): Get maxpagesize from link info.
(assign_file_positions_for_load_sections): Likewise.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Add maxpagesize param. Set map_p_align.
(copy_private_bfd_data): Don't call bfd_elf_set_maxpagesize.
Instead pass maxpagesize to rewrite_elf_program_header.
* elf32-nds32.c (relax_range_measurement): Add link_info param.
Get maxpagesize from link_info. Adjust caller.
* bfd-in2.h: Regenerate.
gas/
* config/obj-elf.c (obj_elf_section): Don't set elf_osabi here.
(obj_elf_type): Likewise.
ld/
* ld.h (ld_config_type): Delete maxpagesize and commonpagesize.
* emultempl/elf.em: Use link_info rather than config
for maxpagesize and commonpagesize.
* emultempl/ppc32elf.em: Likewise.
* ldexp.c (fold_binary, fold_name): Likewise.
* ldemul.c (after_parse_default): Likewise.
(set_output_arch_default): Don't call bfd_emul_set_maxpagesize
or bfd_emul_set_commonpagesize.
It looks like csky missed out on an edit for 706704c883. Not that it
matters very much. There doesn't appear to be any csky reloc howto
that sets the negate bit.
Similarly for ns32k and nds32.
* elf32-csky.c (csky_relocate_contents): Correct negate test.
* cpu-ns32k.c (_bfd_do_ns32k_reloc_contents): Likewise.
* elf32-nds32.c (nds32_relocate_contents): Likewise.
All ELF backends with TLS descriptor support have
/* The offset into splt of the PLT entry for the TLS descriptor
resolver. Special values are 0, if not necessary (or not found
to be necessary yet), and -1 if needed but not determined
yet. */
bfd_vma tlsdesc_plt;
/* The GOT offset for the lazy trampoline. Communicated to the
loader via DT_TLSDESC_GOT. The magic value (bfd_vma) -1
indicates an offset is not allocated. */
bfd_vma tlsdesc_got;
in symbol hash entry. Move tlsdesc_plt/tlsdesc_got to elf_link_hash_entry
to reduce code duplication.
* elf-bfd.h (elf_link_hash_entry): Add tlsdesc_plt and
tlsdesc_got.
* elf32-arm.c (elf32_arm_link_hash_table): Remove tlsdesc_plt
and dt_tlsdesc_got.
(elf32_arm_size_dynamic_sections): Updated. Clear
root.tlsdesc_plt for DF_BIND_NOW.
(elf32_arm_finish_dynamic_sections): Updated.
(elf32_arm_output_arch_local_syms): Likewise.
* elf32-nds32.c (nds32_elf_size_dynamic_sections): Updated.
Clear root.tlsdesc_plt for DF_BIND_NOW.
(nds32_elf_finish_dynamic_sections): Updated.
* elf32-nds32.h (elf_nds32_link_hash_table): Remove
dt_tlsdesc_plt and dt_tlsdesc_got.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Updated.
* elfnn-aarch64.c (elf_aarch64_link_hash_table): Remove
tlsdesc_plt and dt_tlsdesc_got.
(elfNN_aarch64_allocate_dynrelocs): Updated.
(elfNN_aarch64_finish_dynamic_sections): Likewise.
(elfNN_aarch64_size_dynamic_sections): Updated. Clear
root.tlsdesc_plt for DF_BIND_NOW. Don't check DF_BIND_NOW
twice.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Updated.
(_bfd_x86_elf_size_dynamic_sections): Likewise.
(_bfd_x86_elf_finish_dynamic_sections): Likewise.
* elfxx-x86.h (elf_x86_link_hash_table): Remove tlsdesc_plt and
tlsdesc_got.
Don't do anything special with non-loaded, non-alloced sections.
In particular, any relocs in such sections should not affect GOT
and PLT reference counting (ie. we don't allow them to create GOT
or PLT entries), there's no possibility or desire to optimize TLS
relocs, and there's not much point in propagating relocs to shared
libs that the dynamic linker won't relocate.
Since check_relocs is no longer called on non-loaded, non-alloced
sections, remove SEC_ALLOC check. Resolve relocation in debug section
against symbol defined in shared library to 0.
bfd/
PR ld/26080
* elf-m10300.c (mn10300_elf_relocate_section): Resolve relocation
in debug section against symbol defined in shared library to 0.
* elf32-i386.c (elf_i386_check_relocs): Remove SEC_ALLOC check.
* elf32-lm32.c (lm32_elf_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-nds32.c (nds32_elf_check_relocs): Likewise.
* elf32-nios2.c (nios2_elf32_check_relocs): Likewise.
* elf32-or1k.c (or1k_elf_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf32-xtensa.c (elf_xtensa_check_relocs): Likewise.
* elf64-alpha.c (elf64_alpha_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise.
* elf32-vax.c (elf_vax_check_relocs): Set non_got_ref for non-GOT
reference.
(elf_vax_adjust_dynamic_symbol): Generate a copy reloc only if
there is non-GOT reference.
* elflink.c (_bfd_elf_link_check_relocs): Skip non-loaded,
non-alloced sections.
ld/
PR ld/26080
* testsuite/ld-elf/comm-data.exp: Remove copy_reloc.
* testsuite/ld-elf/comm-data2r.rd: Removed.
* testsuite/ld-elf/comm-data2r.sd: Likewise.
* testsuite/ld-elf/comm-data2r.xd: Likewise.
Code in the linker, present before the addition of .gnu.attributes
support, results in shared libraries not being considered by BFD when
merging e_flags and .gnu.attributes from input files to the output.
That doesn't seem correct to me, but I don't know enough about all the
various ABIs to change the behaviour with any confidence. So this
patch merely punts on dynamic objects in merge_private_bfd_data target
functions, with a FIXME for maintainer attention.
I haven't excluded shared libraries from being considered where the
target merge_private_bfd_data (a) already has code dealing with shared
libraries, or (b) where that function just sets the output to the most
constraining arch/mach combination and other fairly trivial merges, or
(c) when the target has no shared library linker support.
In (a) are: arc, arm, aarch64, riscv, sparc.
In (b) are: bpf, cris, csky, m32r, m68k, mn10300, nios2, tilegx,
tilepro, vax, visium, xtensa.
In (c) are: bpf, cr16, h8300, iq2000, m32c, m68hc11, m68hc12, mcore,
mep, msp430, mt, rl78, rx, v850.
PR 25882
* elf32-bfin.c (elf32_bfin_merge_private_bfd_data): Add FIXME.
* elf32-frv.c (frv_elf_merge_private_bfd_data): Likewise.
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Likewise.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Likewise.
* elf32-score.c (s3_elf32_score_merge_private_bfd_data): Likewise.
* elf32-score7.c (s7_elf32_score_merge_private_bfd_data): Likewise.
* elf32-sh.c (sh_elf_merge_private_data): Likewise.
* elf32-tic6x.c (elf32_tic6x_merge_attributes): Likewise.
* elf64-ia64-vms.c (elf64_ia64_merge_private_bfd_data): Likewise.
* elfnn-ia64.c (elfNN_ia64_merge_private_bfd_data): Likewise.
For those ELF targets that have .sdata or .sbss sections, or similar
sections, arrange to mark the sections with the SEC_SMALL_DATA flag.
This fixes regressions in nm symbol type caused by removing .sdata
and .sbss from coff_section_type with commit 49d9fd42ac.
* elf32-m32r.c (m32r_elf_section_flags): New function.
(elf_backend_section_flags): Define.
* elf32-nds32.c (nds32_elf_section_flags): New function.
(elf_backend_section_flags): Define.
* elf32-ppc.c (ppc_elf_section_from_shdr): Set SEC_SMALL_DATA for
.sbss and .sdata sections.
* elf32-v850.c (v850_elf_section_from_shdr): Set SEC_SMALL_DATA
for SHF_V850_GPREL sections.
* elf64-alpha.c (elf64_alpha_section_from_shdr): Delete outdated
FIXME.
* elf64-hppa.c (elf64_hppa_section_from_shdr): Set SEC_SMALL_DATA
for SHF_PARISC_SHORT sections.
* elf64-ppc.c (ppc64_elf_section_flags): New function.
(elf_backend_section_flags): Define.
* elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Set SEC_SMALL_DATA
for SHF_MIPS_GPREL sections. Delete FIXME.
and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
Also fixes m68hc1x printf arguments which would have bombed when
compiling on a 32-bit host with --enable-64-bit-bfd.
bfd/
PR 24955
* elf32-arm.c (set_cmse_veneer_addr_from_implib): Use bfd_malloc
rather than xmalloc.
* elf32-m68hc1x.c (reloc_warning): New function.
(elf32_m68hc11_relocate_section): Use it here. Cast bfd_vma values
corresponding to %lx in format strings.
* elf32-nds32.c (nds32_insertion_sort): Use a stack temporary.
gas/
* config/tc-nds32.c (nds32_set_section_relocs): Use relocs and n
parameters rather than equivalent sec->orelocation and
sec->reloc_count. Don't sort for n <= 1. Tidy.
This PR shows a fuzzed binary triggering a segfault via a bad
relocation in .debug_line. It turns out that unlike normal
relocations applied to a section, the linker applies those with
symbols from discarded sections via _bfd_clear_contents without
checking that the relocation is within the section bounds. The same
thing now happens when reading debug sections since commit
a4cd947aca, the PR23425 fix.
PR 23770
PR 23425
* reloc.c (_bfd_clear_contents): Replace "location" param with
"buf" and "off". Bounds check "off". Return status.
* cofflink.c (_bfd_coff_generic_relocate_section): Update
_bfd_clear_contents call.
* elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Likewise.
* elf32-arc.c (elf_arc_relocate_section): Likewise.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-metag.c (metag_final_link_relocate): Likewise.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
* elf32-visium.c (visium_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-x86-64.c *(elf_x86_64_relocate_section): Likewise.
* libbfd-in.h (_bfd_clear_contents): Update prototype.
* libbfd.h: Regenerate.
It is unused, removing it fixes this error when building with clang:
/home/emaisin/src/binutils-gdb/bfd/elf32-nds32.c:3172:1: error: unused function 'elf32_nds32_allocate_dynrelocs' [-Werror,-Wunused-function]
elf32_nds32_allocate_dynrelocs (struct bfd_link_info *info, asection *sreloc,
^
1 error generated.
gcc only reports the error if you remove "inline". I don't know if this
is actually a mistake and it should actually be used though.
gdb/ChangeLog:
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): Remove.
The fls function already exists on macOS and FreeBSD (and probably others),
leading to this error:
/Users/simark/src/binutils-gdb/bfd/elf32-nds32.c:5074:1: error: static declaration of 'fls' follows non-static declaration
fls (register unsigned int x)
^
/usr/include/strings.h:87:6: note: previous declaration is here
int fls(int) __OSX_AVAILABLE_STARTING(__MAC_10_5, __IPHONE_2_0);
^
Add a configure-time check for it, and only define it if the system doesn't
provide it.
bfd/ChangeLog:
* configure.ac: Check for fls.
* elf32-nds32.c (fls): Only define if !HAVE_FLS.
* config.in: Re-generate.
* configure: Re-generate.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
Use `bfd_is_abs_symbol' to determine whether a symbol is absolute,
avoiding a problem with ordinary symbols defined in a linker script
outside an output section definition. Such symbols have its owning
section set to the absolute section up to the final link phase. A flag
has been added to the link hash to identify such symbols. Rather than
checking the flag by hand, use the macro that does it uniformly for all
users.
bfd/
* elf32-nds32.c (nds32_elf_relax_loadstore): Use
`bfd_is_abs_symbol' rather than `bfd_is_abs_section' in checking
whether the symbol is absolute.
(nds32_elf_relax_lo12): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Likewise.
(elfNN_aarch64_check_relocs): Likewise.
* xcofflink.c (xcoff_need_ldrel_p): Likewise.
(bfd_xcoff_import_symbol): Likewise.
(xcoff_write_global_symbol): Likewise.
Fix:
cc1: warnings being treated as errors
.../bfd/elf32-nds32.c: In function 'nds32_convert_32_to_16':
.../bfd/elf32-nds32.c:6816: error: 'insn_type' may be used uninitialized in this function
make[4]: *** [elf32-nds32.lo] Error 1
seen with GCC 4.1.2 and 4.4.7.
bfd/
* elf32-nds32.c (nds32_convert_32_to_16): Preset `insn_type'.
Many targets define their own dyn_relocs struct when they could use
struct elf_dyn_relocs. This patch tidies that, and uses
readonly_dynrelocs in a few more places.
The SH adjust_dynamic_symbol had some really weird code dating back to
2002 that looked over dynamic relocations for any in SEC_HAS_CONTENTS
or SEC_READONLY sections, rather than just the usual SEC_READONLY
sections. So basically any dynamic relocation. What's more, the SH
relocate_section has no support for emitting dynamic relocations in
non-PIC. In other words, SH has no support for avoiding copy relocs
in non-PIC. I've made that more obvious by using "if (0 && ..)" in
asjust_dynamic_symbol.
Unfortunately, LM32, M32R, NDS32, and OR1K copied the bogus SH
adjust_dynamic_symbol code. So none of those targets would have
avoided copy relocs. LM32, M32R, NDS32 get the "if (0)" treatment
too. (LM32 is even more broken in that non_got_ref is never set.)
OR1K relocate_section looks like it might support dynamic relocs in
non-PIC, so I've enabled the copy reloc avoidance code for that
target.
* elf32-hppa.c (struct elf32_hppa_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf32_hppa_adjust_dynamic_symbol): Comment tidy.
* elf32-lm32.c (struct elf_lm32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(lm32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-m32r.c (struct elf_m32r_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(m32r_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-metag.c (struct elf_metag_dyn_reloc_entry): Delete. Use
struct elf_dyn_relocs throughout file instead.
(elf_metag_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-microblaze.c (struct elf32_mb_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(readonly_dynrelocs): New function.
(microblaze_elf_adjust_dynamic_symbol): Use it.
* elf32-nds32.c (struct elf_nds32_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(nds32_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-nios2.c (struct elf32_nios2_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
* elf32-or1k.c (struct elf_or1k_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(or1k_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-sh.c (struct elf_sh_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(sh_elf_adjust_dynamic_symbol): Use readonly_dynrelocs, but disable.
Disable -z no-copyreloc too.
* elf32-tilepro.c (struct tilepro_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilepro_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfnn-riscv.c (struct riscv_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(riscv_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-sparc.c (struct _bfd_sparc_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(_bfd_sparc_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elfxx-tilegx.c (struct tilegx_elf_dyn_relocs): Delete. Use
struct elf_dyn_relocs throughout file instead.
(tilegx_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Use readonly_dynrelocs.
Alan Modra