Use the inferior parameter now available in jit_inferior_created_hook.
It is passed down to jit_inferior_init, which uses it as much as
possible instead of the current inferior or current program space.
gdb/ChangeLog:
* jit.c (jit_reader_load_command): Pass current inferior.
(jit_inferior_init): Change parameter type to inferior, use it.
(jit_inferior_created): Remove.
(jit_inferior_created_hook): Pass inferior parameter down.
(_initialize_jit): Use jit_inferior_created_hook instead of
jit_inferior_created.
* jit.h (jit_inferior_created_hook): Add inferior parameter.
* infrun.c (follow_exec): Pass inferior to
jit_inferior_created_hook.
Change-Id: If3a2114a933370dd313d5abd623136d273cdb8fa
Pass the inferior argument available in thread_db_inferior_created, and
use it to do most things requiring the inferior.
check_pid_namespace_match is not completely decoupled from the current
inferior yet, there are hidden references behind target_can_run, for
example. But I think this is still a good step forward.
gdb/ChangeLog:
* linux-thread-db.c (check_pid_namespace_match): Add inferior
parameter and use it.
(thread_db_inferior_created): Pass inferior argument.
Change-Id: Ib768b14fc61dcf115fe13f776691f2c2f36e0679
I think it would make sense for the inferior_created observable to say
which inferior is being dealt with, rather than relying on it being the
current inferior.
This patch adds an inferior parameter to inferior_created, but does not
change the callbacks to use it.
gdb/ChangeLog:
* aix-thread.c (aix_thread_inferior_created): Add inferior
parameter.
* bsd-uthread.c (bsd_uthread_inferior_created): Likewise.
* dummy-frame.c (cleanup_dummy_frames): Likewise.
* jit.c (jit_inferior_created): Likewise.
* linux-thread-db.c (thread_db_inferior_created): Likewise.
* m68k-linux-tdep.c (m68k_linux_inferior_created): Likewise.
* observable.h (inferior_created): Likewise.
* ravenscar-thread.c (ravenscar_inferior_created): Likewise.
* symfile-mem.c (add_vsyscall_page): Likewise.
* infcmd.c (post_create_inferior): Pass inferior argument.
Change-Id: I2543d19ff055a9df6b269929faea10b27d2adc5e
The only possible form for a DW_AT_low_pc attribute is DW_FORM_addr.
When specifying in dwarf assembly a low_pc attribute without explicit form:
...
{low_pc {main_label - 4}}
...
the resulting attribute uses DW_FORM_string, which is misinterpreted by gdb
when reading it as:
...
cu->base_address = attr->as_address ();
...
Stop using DW_FORM_string as default form. Instead, use a default form based
on the attribute name, if possible and unambiguous. Otherwise, error out.
F.i.:
- for DW_AT_low_pc we use DW_FORM_addr.
- For DW_AT_high_pc, we don't specify a default form because it could be
either address or constant class.
- For DW_AT_name, we use DW_FORM_string. While we could encode with
DW_FORM_strp instead, DW_FORM_string is always ok.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-23 Tom de Vries <tdevries@suse.de>
* lib/dwarf.exp (Dwarf::_guess_form): Return "" by default instead of
DW_FORM_string.
(Dwarf::_default_form): New proc.
(Dwarf::_handle_DW_TAG): Use _default_form. Error out if no form was
guessed.
This commit removes a call to ada_check_typedef which has already
been done a few lines earlier in the same function, so the second one
is superfluous.
gdb/ChangeLog:
* ada-typeprint.c (ada_print_type): Remove superfluous second call
to ada_check_typedef.
Moves the f_language class from f-lang.c into f-lang.h. The benefit
of this is that functions declared in other f-*.c files can become
member functions without having to go through a level of indirection.
Some additional support functions have now become private member
functions of the f_language class, these are mostly functions that
then called some other function that was itself a member of the
language_defn class hierarchy.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* f-exp.y (f_parse): Rename to...
(f_language::parser): ...this.
* f-lang.c (f_get_encoding): Rename to...
(f_language::get_encoding): ...this.
(f_op_print_tab): Rename to...
(f_language::op_print_tab): ...this.
(exp_descriptor_f): Rename to...
(f_language::exp_descriptor_tab): ...this.
(class f_language): Moved to f-lang.h.
(f_language::language_arch_info): New function, moved out of class
declaration.
(f_language::search_name_hash): Likewise.
(f_language::lookup_symbol_nonlocal): Likewise.
(f_language::get_symbol_name_matcher_inner): Likewise.
* f-lang.h: Add 'valprint.h' include.
(class f_language): Moved here from f-lang.c.
* f-typeprint.c (f_type_print_args): Delete commented out
declaration.
(f_print_typedef): Rename to...
(f_language::print_typedef): ...this.
(f_print_type): Rename to...
(f_language::print_type): ...this.
(f_type_print_varspec_prefix): Delete declaration and rename to...
(f_language::f_type_print_varspec_prefix): ...this.
(f_type_print_varspec_suffix): Delete declaration and rename to...
(f_language::f_type_print_varspec_suffix): ...this.
(f_type_print_base): Delete declaration and rename to...
(f_language::f_type_print_base): ...this.
* f-valprint.c (f_value_print_inner): Rename to...
(f_language::value_print_inner): ...this.
* parse.c: Delete 'f-lang.h' include.
Improves the comment at the declaration of language_defn::print_type.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (language_defn::print_type): Add variable names in
declaration, and update header comment.
GDB already has a global symbol `demangle` (a boolean), having a
language method called `demangle` is not a good idea as we often want
to reference `demangle` the control variable inside `demangle` the
member function.
This commit renames `demangle` the member function to
`demangle_symbol`.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* ada-lang.c (ada_language::demangle): Rename to...
(ada_language::demangle_symbol): ...this.
* c-lang.c (cplus_language::demangle): Rename to...
(cplus_language::demangle_symbol): ...this.
* d-lang.c (d_language::demangle): Rename to...
(d_language::demangle_symbol): ...this.
* f-lang.c (f_language::demangle): Rename to...
(f_language::demangle_symbol): ...this.
* go-lang.c (go_language::demangle): Rename to...
(go_language::demangle_symbol): ...this.
* language.c (language_demangle): Update call to demangle_symbol.
(auto_or_unknown_language::demangle): Rename to...
(auto_or_unknown_language::demangle_symbol): ...this.
* language.h (language_defn::demangle): Rename to...
(language_defn::demangle_symbol): ...this.
* objc-lang.c (objc_language::demangle): Rename to...
(objc_language::demangle_symbol): ...this.
* rust-lang.c (rust_language::demangle): Rename to...
(rust_language::demangle_symbol): ...this.
Replace the single use of the LA_ITERATE_OVER_SYMBOLS macro with the
macro's definition, and delete the macro.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (LA_ITERATE_OVER_SYMBOLS): Delete.
(iterate_over_file_blocks): Replace use of macro with the macros
definition.
Replace the single use of the LA_PRINT_ARRAY_INDEX macro with the
macro's definition, and delete the macro.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (LA_PRINT_ARRAY_INDEX): Delete.
* valprint.c (maybe_print_array_index): Replace use of macro with
the macros definition.
Remove the LA_VALUE_PRINT macro, and replace its uses with direct
calls to the value_print member function on an appropriate language.
In the global 'value_print' function, we call the value_print method
on the current_language, this is a direct inline replacement of the
old LA_VALUE_PRINT macro.
However, in ada-lang.c, and language.c the macro was being used
within the print_array_index member function of a language class. In
these cases we now call the value_print member function of the current
language class.
In theory, when we are inside (for example) the
ada_language::print_array_index function the current_language should
always be set to Ada, so this change should have no effect. However,
if we ever could get into ada_language::print_array_index with the
current language set to something else (which I think would have been
a bug) then we would now see a change in behaviour. I couldn't find
any cases where this happened though.
There should be no user visible changes after this commit, but it is
not impossible in some edge cases.
gdb/ChangeLog:
* ada-lang.c (ada_language::print_array_index): Call value_print
directly.
* language.c (language_defn::print_array_index): Likewise.
* language.h (LA_VALUE_PRINT): Delete.
* valprint.c (value_print): Call value_print on the
current_language directly.
Remove the LA_PRINT_TYPEDEF macro, replace the single use with the
macros definition.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.h (LA_PRINT_TYPEDEF): Delete.
* typeprint.c (typedef_print): Call print_typedef directly on the
current_language object.
Move the m2_language class from m2-lang.c into m2-lang.h. The benefit
of this move is that we can remove trampoline functions. Currently
the language implementation is split of different m2-* files with
m2-lang.h including declaration for all the language implementation
functions.
Currently the m2_language class in m2-lang.c has member functions that
then call the global functions declared in m2-lang.h.
After this change the m2_language class is declared in m2-lang.h, and
the member functions are the implementations defined in all the m2-*
files.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* m2-exp.y (m2_parse): Rename to...
(m2_language::parser): ...this. Update function signature.
* m2-lang.c (m2_printchar): Renamed to m2_language::printchar.
(m2_op_print): Rename to...
(m2_language::op_print_tab): ...this, and make const.
(exp_descriptor_modula2): Rename to...
(m2_language::exp_descriptor_modula2): ...this.
(class m2_language): Move to m2-lang.h.
(m2_language::language_arch_info): New function, moved out of
class declaration.
(m2_language::printchar): New function, body from m2_printchar.
(m2_language::printstr): New function, moved out of class
declaration.
(m2_language::emitchar): Likewise.
* m2-lang.h (m2_parse): Delete declaration.
(m2_print_typedef): Delete declaration.
(m2_value_print_inner): Delete declaration.
(class m2_language): Class declaration moved from m2-lang.c,
larger functions are left in m2-lang.c.
* m2-typeprint.c (m2_print_typedef): Rename to...
(m2_language::print_typedef): ...this, and update function
signature.
* m2-valprint.c (m2_value_print_inner): Rename to...
(m2_language::value_print_inner): ...this, replace use of
LA_PRINT_STRING with a direct call to printstr member function,
and update recursive call.
The auto_language and unknown_language classes are basically the same
except for the language names and store_sym_names_in_linkage_form_p
which the unknown_language overrides to return true, while
auto_language returns the default false.
This commit creates a new parent class from which both of these
languages can inherit. The two base classes are now greatly reduced.
Some of the static helper functions which previously were called from
both of these languages are now only called from one place, and so
I've inlined them into the new class.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* language.c (default_is_string_type_p): Delete, implementation
moved into auto_or_unknown_language::is_string_type_p.
(unk_op_print_tab): Moved into
auto_or_unknown_language::opcode_print_table.
(unknown_language_arch_info): Delete, implementation moved into
auto_or_unknown_language::language_arch_info.
(class auto_or_unknown_language): New class, member functions
copied from unknown_language class, with some updates.
(class unknown_language): Most member functions moved into
auto_or_unknown_language class. Inherit from
auto_or_unknown_language class.
(class auto_language): Inherit from auto_or_unknown_language.
Delete most member functions.
It's possible to come across TYPE_CODE_UNDEF at this point in
read_member_functions, which according to a comment in read_type
is used for forward references.
gdb/ChangeLog:
2020-10-22 Hannes Domani <ssbssa@yahoo.de>
* stabsread.c (read_member_functions): Remove gdb_assert.
This causes gdb to crash in strlen.
Happens if init_complex_type is called for a type created by
dbx_init_float_type in stabsread.c.
gdb/ChangeLog:
2020-10-22 Hannes Domani <ssbssa@yahoo.de>
* gdbtypes.c (init_complex_type): Check target type name.
I noticed some clearly stale entries in target-debug.h (which contained
references to VEC). I commented everything in target-debug.h and then
uncommented things until it built again, it pointed out a few unused
macros. Remove them.
gdb/ChangeLog:
* target-debug.h (target_debug_print_struct_target_ops_p):
Remove.
(target_debug_print_async_callback_ftype_p): Remove.
(target_debug_print_struct_trace_state_variable_p): Remove.
(target_debug_print_struct_traceframe_info_p): Remove.
(target_debug_print_VEC__btrace_block_s__pp): Remove.
(target_debug_print_enum_btrace_format): Remove.
(target_debug_print_enum_info_proc_what): Remove.
(target_debug_print_thread_info_pp): Remove.
Change-Id: I7943d21ac6e78751fd7c65a45b345018623ac2f2
Since we converted gdbarch_make_corefile_notes to returning a
gdb::unique_xmalloc_ptr, I figured it would make sense to converted
target_ops::make_corefile_notes as well.
The only implementation of that is in procfs.c, and it should ideally be
re-written as a gdbarch method (see comment in write_gcore_file_1), but
in the mean time I guess it doesn't hurt to throw some unique pointer at
it.
I tested that it builds on Solaris 11 (gcc compile farm machine gcc211),
but I am not able to test it, because I can't get GDB to start a
process (I'll look at that separately).
gdb/ChangeLog:
* target.h (struct target_ops) <make_corefile_notes>:
Change return type to unique pointer.
* target.c (dummy_make_corefile_notes): Likewise.
* exec.c (struct exec_target) <make_corefile_notes>:
Likewise.
(exec_target::make_corefile_notes): Likewise.
* procfs.c (class procfs_target) <make_corefile_notes>:
Likewise.
(procfs_do_thread_registers): Adjust to unique pointer.
(struct procfs_corefile_thread_data): Add constructor.
<note_data>: Change type to unique pointer.
(procfs_corefile_thread_callback): Adjust to unique pointer.
(procfs_target::make_corefile_notes): Change return type to
unique pointer.
* target-delegates.c: Re-generate.
* gcore.c (write_gcore_file_1): Adjust.
* target-debug.h (target_debug_print_gdb_unique_xmalloc_ptr_char):
New.
Change-Id: I768fb17ac0f7adc67d2fe95e952c784fe0ac37ab
While working on PR25858 I noticed that the following trigger patch:
...
@@ -2918,6 +2918,7 @@ find_pc_sect_compunit_symtab
const struct blockvector *bv;
bv = COMPUNIT_BLOCKVECTOR (cust);
+ (volatile int)blockvector_contains_pc (bv, pc);
b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
if (BLOCK_START (b) <= pc
...
triggers this assert, which checks that the returned block indeed
contains pc:
...
@@ -170,7 +170,10 @@ find_block_in_blockvector
{
b = BLOCKVECTOR_BLOCK (bl, bot);
if (BLOCK_END (b) > pc)
- return b;
+ {
+ gdb_assert (BLOCK_START (b) <= pc);
+ return b;
+ }
bot--;
}
...
when running test-case gdb.ada/bp_c_mixed_case.exp.
It's possible that the trigger patch breaks an undocumented invariant: I've
tried a build and test run without the trigger patch and did not manage to
trigger the assert.
For robustness-sake, fix the assert by bailing out if 'BLOCK_START (b) <= pc'
doesn't hold.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-10-22 Tom de Vries <tdevries@suse.de>
* block.c (find_block_in_blockvector): Make sure the returned block
contains pc.
Fix a regression introduced by commit 7188ed02d2 ("Replace
dwarf2_per_cu_data::cu backlink with per-objfile map").
This patch targets both master and gdb-10-branch, since this is a
regression from GDB 9.
Analysis
--------
The DWARF generated by the included test case looks like:
0x0000000b: DW_TAG_compile_unit
DW_AT_language [DW_FORM_sdata] (4)
0x0000000d: DW_TAG_base_type
DW_AT_name [DW_FORM_string] ("int")
DW_AT_byte_size [DW_FORM_data1] (0x04)
DW_AT_encoding [DW_FORM_sdata] (5)
0x00000014: DW_TAG_subprogram
DW_AT_name [DW_FORM_string] ("apply")
0x0000001b: DW_TAG_subprogram
DW_AT_specification [DW_FORM_ref4] (0x00000014 "apply")
DW_AT_low_pc [DW_FORM_addr] (0x0000000000001234)
DW_AT_high_pc [DW_FORM_data8] (0x0000000000000020)
0x00000030: DW_TAG_template_type_parameter
DW_AT_name [DW_FORM_string] ("T")
DW_AT_type [DW_FORM_ref4] (0x0000000d "int")
0x00000037: NULL
0x00000038: NULL
Simply loading the file in GDB makes it crash:
$ ./gdb -nx --data-directory=data-directory testsuite/outputs/gdb.dwarf2/pr26693/pr26693
[1] 15188 abort (core dumped) ./gdb -nx --data-directory=data-directory
The crash happens here, where htab (a dwarf2_cu::die_hash field) is
unexpectedly NULL while generating partial symbols:
#0 0x000055555fa28188 in htab_find_with_hash (htab=0x0, element=0x7fffffffbfa0, hash=27) at /home/simark/src/binutils-gdb/libiberty/hashtab.c:591
#1 0x000055555cb4eb2e in follow_die_offset (sect_off=(unknown: 27), offset_in_dwz=0, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22951
#2 0x000055555cb4edfb in follow_die_ref (src_die=0x0, attr=0x7fffffffc130, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22968
#3 0x000055555caa48c5 in partial_die_full_name (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8441
#4 0x000055555caa4d79 in add_partial_symbol (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8469
#5 0x000055555caa7d8c in add_partial_subprogram (pdi=0x621000157e70, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8737
#6 0x000055555caa265c in scan_partial_symbols (first_die=0x621000157e00, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8230
#7 0x000055555ca98e3f in process_psymtab_comp_unit_reader (reader=0x7fffffffc6b0, info_ptr=0x60600009650d "\003int", comp_unit_die=0x621000157d10, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7614
#8 0x000055555ca9aa2c in process_psymtab_comp_unit (this_cu=0x621000155510, per_objfile=0x613000009f80, want_partial_unit=false, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7712
#9 0x000055555caa051a in dwarf2_build_psymtabs_hard (per_objfile=0x613000009f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8073
The special thing about this DWARF is that the subprogram at 0x1b is a
template specialization described with DW_AT_specification, and has no
DW_AT_name in itself. To compute the name of this subprogram,
partial_die_full_name needs to load the full DIE for this partial DIE.
The name is generated from the templated function name and the actual
tempalate parameter values of the specialization.
To load the full DIE, partial_die_full_name creates a dummy DWARF
attribute of form DW_FORM_ref_addr that points to our subprogram's DIE,
and calls follow_die_ref on it. This eventually causes
load_full_comp_unit to be called for the exact same CU we are currently
making partial symbols for:
#0 load_full_comp_unit (this_cu=0x621000155510, per_objfile=0x613000009f80, skip_partial=false, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:9238
#1 0x000055555cb4e943 in follow_die_offset (sect_off=(unknown: 27), offset_in_dwz=0, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22942
#2 0x000055555cb4edfb in follow_die_ref (src_die=0x0, attr=0x7fffffffc130, ref_cu=0x7fffffffc110) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22968
#3 0x000055555caa48c5 in partial_die_full_name (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8441
#4 0x000055555caa4d79 in add_partial_symbol (pdi=0x621000157e70, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8469
#5 0x000055555caa7d8c in add_partial_subprogram (pdi=0x621000157e70, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8737
#6 0x000055555caa265c in scan_partial_symbols (first_die=0x621000157e00, lowpc=0x7fffffffc5c0, highpc=0x7fffffffc5e0, set_addrmap=1, cu=0x615000023f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8230
#7 0x000055555ca98e3f in process_psymtab_comp_unit_reader (reader=0x7fffffffc6b0, info_ptr=0x60600009650d "\003int", comp_unit_die=0x621000157d10, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7614
#8 0x000055555ca9aa2c in process_psymtab_comp_unit (this_cu=0x621000155510, per_objfile=0x613000009f80, want_partial_unit=false, pretend_language=language_minimal) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7712
#9 0x000055555caa051a in dwarf2_build_psymtabs_hard (per_objfile=0x613000009f80) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:8073
load_full_comp_unit creates a cutu_reader for the CU. Since a dwarf2_cu
object already exists for the CU, load_full_comp_unit is expected to
find it and pass it to cutu_reader, so that cutu_reader doesn't create
a new dwarf2_cu for the CU.
And this is the difference between before and after the regression.
Before commit 7188ed02d2, the dwarf2_per_cu_data -> dwarf2_cu link was
a simple pointer in dwarf2_per_cu_data. This pointer was set up when
starting the read the partial symbols. So it was already available at
that point where load_full_comp_unit gets called. Post-7188ed02d2a7,
this link is per-objfile, kept in the dwarf2_per_objfile::m_dwarf2_cus
hash map. The entry is only put in the hash map once the partial
symbols have been successfully read, when cutu_reader::keep is called.
Therefore, it is _not_ set at the point load_full_comp_unit is called.
As a consequence, a new dwarf2_cu object gets created and initialized by
load_full_comp_unit (including initializing that dwarf2_cu::die_hash
field). Meanwhile, the dwarf2_cu object created and used by the callers
up the stack does not get initialized for full symbol reading, and the
dwarf2_cu::die_hash field stays unexpectedly NULL.
Solution
--------
Since the caller of load_full_comp_unit knows about the existing
dwarf2_cu object for the CU we are reading (the one load_full_comp_unit
is expected to find), we can simply make it pass it down, instead of
having load_full_comp_unit look up the per-objfile map.
load_full_comp_unit therefore gets a new `existing_cu` parameter. All
other callers get updated to pass `per_objfile->get_cu (per_cu)`, so the
behavior shouldn't change for them, compared to the current HEAD.
A test is added, which is the bare minimum to reproduce the issue.
Notes
-----
The original problem was reproduced by downloading
https://github.com/oneapi-src/oneTBB/releases/download/v2020.3/tbb-2020.3-lin.tgz
and loading libtbb.so in GDB. This code was compiled with the Intel
C/C++ compiler. I was not able to reproduce the issue using GCC, I
think because GCC puts a DW_AT_name in the specialized subprogram, so
there's no need for partial_die_full_name to load the full DIE of the
subprogram, and the faulty code doesn't execute.
gdb/ChangeLog:
PR gdb/26693
* dwarf2/read.c (load_full_comp_unit): Add existing_cu
parameter.
(load_cu): Pass existing CU.
(process_imported_unit_die): Likewise.
(follow_die_offset): Likewise.
gdb/testsuite/ChangeLog:
PR gdb/26693
* gdb.dwarf2/template-specification-full-name.exp: New test.
Change-Id: I57c8042f96c45f15797a3848e4d384181c56bb44
AArch64 generates functions without a prologue for these two testcases,
therefore we shouldn't expect the function location to be displayed with
an offset.
gdb/testsuite/ChangeLog:
2020-10-22 Luis Machado <luis.machado@linaro.org>
* gdb.base/msym-bp-shl.exp (test_break): Adjust pattern to not
expected an offset from the function.
* gdb.base/msym-bp.exp (test): Likewise.
The following failures started showing up after commit
bb2a67773c - "Use a std::vector in target_section_table":
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[0]@4
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[pagesize-4]@4
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[-3]@6
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_rw[pagesize-3]@6
FAIL: gdb.base/corefile2.exp: renamed binfile: print/x mbuf_ro[pagesize-3]@6
I tracked it down to a problem in core_target::xfer_partial, at this point:
if (!m_core_file_mappings.empty ())
xfer_status = xfer_memory_via_mappings (readbuf, writebuf, offset,
len, xfered_len);
else
xfer_status = this->beneath ()->xfer_partial (object, annex, readbuf,
writebuf, offset, len,
xfered_len);
It seems commit bb2a67773c uncovered a latent bug when handling a particular
case where things are running within a Docker container using the AUFS storage
driver.
When building the file mappings for a core file, we call
gdbarch_read_core_file_mappings, which in turn passes a couple lambda
callbacks. One pre-loop and one in-loop.
The catch is that commit bb2a67773c reworked the pre-loop lambda and
made it do nothing. Before that commit, we always allocated
m_core_file_mappings in that lambda.
Now, when calling the in-loop lambda, we don't touch m_core_file_mappings
because the bfd is nullptr (given Docker leaks the host system path, and that
file doesn't exist within the container itself).
So, instead, we add an entry to the m_core_unavailable_mappings vector.
When we reach core_target::xfer_partial, we're only checking for an empty
m_core_file_mappings. Given it is now empty, we take the path of reading
the contents from the file, not the core file. This reads back unexpected
results.
The following patch fixes this by also checking for
m_core_unavailable_mappings, given core_target::xfer_memory_via_mappings
already handles the Docker/AUFS situation.
gdb/ChangeLog:
2020-10-22 Luis Machado <luis.machado@linaro.org>
* corelow.c (core_target::xfer_partial): Also check for an empty
m_core_unavailable_mappings vector.
With this commit GDB now understands the syntax of Fortran array
strides, a user can type an expression including an array stride, but
they will only get an error informing them that array strides are not
supported.
This alone is an improvement on what we had before in GDB, better to
give the user a helpful message that a particular feature is not
supported than to just claim a syntax error.
Before:
(gdb) p array (1:10:2, 2:10:2)
A syntax error in expression, near `:2, 2:10:2)'.
Now:
(gdb) p array (1:10:2, 2:10:2)
Fortran array strides are not currently supported
Later commits will allow GDB to handle array strides correctly.
gdb/ChangeLog:
* expprint.c (dump_subexp_body_standard): Print RANGE_HAS_STRIDE.
* expression.h (enum range_type): Add RANGE_HAS_STRIDE.
* f-exp.y (arglist): Allow for a series of subranges.
(subrange): Add cases for subranges with strides.
* f-lang.c (value_f90_subarray): Catch use of array strides and
throw an error.
* parse.c (operator_length_standard): Handle RANGE_HAS_STRIDE.
gdb/testsuite/ChangeLog:
* gdb.fortran/array-slices.exp: Add a new test.
To avoid confusion with other parts of GDB relating to types and
ranges, rename this enum to make it clearer that it is a set of
individual flags rather than an enumeration of different types of
range.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* expprint.c (print_subexp_standard): Change enum range_type to
range_flag and rename variables to match.
(dump_subexp_body_standard): Likewise.
* expression.h (enum range_type): Rename to...
(enum range_flag): ...this.
(range_types): Rename to...
(range_flags): ...this.
* f-lang.c (value_f90_subarray): Change enum range_type to
range_flag and rename variables to match.
* parse.c (operator_length_standard): Likewise.
* rust-exp.y (rust_parser::convert_ast_to_expression): Change enum
range_type to range_flag.
* rust-lang.c (rust_evaluate_funcall): Likewise.
(rust_range): Likewise.
(rust_compute_range): Likewise.
(rust_subscript): Likewise.
The expression range_type enum represents the following ideas:
- Lower bound is set to default,
- Upper bound is set to default,
- Upper bound is exclusive.
There are currently 6 entries in the enum to represent the combination
of all those ideas.
In a future commit I'd like to add stride information to the range,
this could in theory appear with any of the existing enum entries, so
this would take us to 12 enum entries.
This feels like its getting a little out of hand, so in this commit I
switch the range_type enum over to being a flags style enum. There's
one entry to represent no flags being set, then 3 flags to represent
the 3 ideas above. Adding stride information will require adding only
one more enum flag.
I've then gone through and updated the code to handle this change.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* expprint.c (print_subexp_standard): Update to reflect changes to
enum range_type.
(dump_subexp_body_standard): Likewise.
* expression.h (enum range_type): Convert to a bit field enum, and
make the enum unsigned.
* f-exp.y (subrange): Update to reflect changes to enum
range_type.
* f-lang.c (value_f90_subarray): Likewise.
* parse.c (operator_length_standard): Likewise.
* rust-exp.y (rust_parser::convert_ast_to_expression): Likewise.
* rust-lang.c (rust_range): Likewise.
(rust_compute_range): Likewise.
(rust_subscript): Likewise.
This patch starts by making the gdbarch_make_corefile_notes function
return a gdb::unique_xmalloc_ptr<char> and takes care of the fallouts,
mostly in linux-tdep.c and fbsd-tdep.c.
The difficulty in these files is that they use the BFD API for writing
core files, where you pass in a pointer to a malloc-ed buffer (or NULL
in the beginning), it re-allocs it if needed, and returns you the
possibly updated pointer. I therefore used this pattern everywhere:
note_data.reset (elfcore_write_note (obfd, note_data.release (), ...)
This hands over the ownership of note_data to the BFD function for the
duration of the call, and then puts its back in note_data right after
the call.
gdb/ChangeLog:
* gdbarch.sh (make_corefile_notes): Return unique pointer.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* gcore.c (write_gcore_file_1): Adjust.
* fbsd-tdep.c (struct fbsd_collect_regset_section_cb_data): Add
constructor.
<note_data>: Change type to unique pointer.
<abort_iteration>: Change type to bool.
(fbsd_collect_regset_section_cb): Adjust to unique pointer.
(fbsd_collect_thread_registers): Return void, adjust.
(struct fbsd_corefile_thread_data): Add construtor.
<note_data>: Change type to unique pointer.
(fbsd_corefile_thread): Adjust.
(fbsd_make_corefile_notes): Return unique pointer, adjust.
* linux-tdep.c (linux_make_mappings_corefile_notes): Change type
to unique pointer, adjust.
(struct linux_collect_regset_section_cb_data): Add constructor.
<note_data>: Change type to unique pointer.
<abort_iteration>: Change type to bool.
(linux_collect_thread_registers): Return void, adjust.
(struct linux_corefile_thread_data): Add constructor.
<note_data>: Change type to unique pointer.
(linux_corefile_thread): Adjust.
(linux_make_corefile_notes): Return unique pointer, adjust.
Change-Id: I1e03476bb47b87c6acb3e12204d193f38cc4e02b
gdb.mi/mi-fullname-deleted.exp attempts to generate an executable
with a doubled slash in the source filename recorded in its debug
info. This attempt fails when compiling using Clang, causing the
substituted filename test to fail. This commit fixes this issue.
It also expands the comments in the file, to clarify what the test
is attempting to do, and to document where it doesn't succeed.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fullname-deleted.exp: Fix substituted
fullname test with Clang. Also expand comments generally.
gdbarch predicates (functions suffixed _p to check whether a gdbarch
implements a given method) currently return int. Make them return bool.
There is no expected behavior change.
gdb/ChangeLog:
* gdbarch.sh: Make generated predicates return bool.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
Change-Id: Ie7ebc1acae62df83da9085ba69327fca551c5a30
While working on some minor varobj cleanups, I noticed this obvious
one: the varobj_item typedef isn't redundant in C++, and so can be
removed.
gdb/ChangeLog
2020-10-20 Tom Tromey <tom@tromey.com>
* varobj-iter.h (struct varobj_item): Remove typedef.
When looking at readelf output for test-case gdb.dwarf2/pr13961.exp, we have:
...
$ readelf -wi ./outputs/gdb.dwarf2/pr13961/pr13961
...
<0><14c>: Abbrev Number: 0
readelf: Warning: Bogus end-of-siblings marker detected at offset 14c in \
.debug_info section
...
Fix this by removing the superfluous end-of-siblings marker.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-20 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/pr13961.S: Remove superfluous end-of-siblings marker.
In gdb.dwarf2/ada-valprint-error.exp we find:
...
untested ${testfile}.exp
...
such that we have:
...
UNTESTED: gdb.dwarf2/ada-valprint-error.exp: ada-valprint-error.exp
...
Fix this and a likewise unsupported message in
gdb.dwarf2/dw2-dir-file-name.exp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-20 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/ada-valprint-error.exp: Remove redundant mention of .exp
file.
* gdb.dwarf2/dw2-dir-file-name.exp: Same.
In f.i. gdb.dwarf2/dw2-line-number-zero.exp we find:
...
verbose "Skipping dw2-line-number-zero test."
...
Make the skip messages use the gdb_test_file_name variable, to reduce the
amount of changes that needs to be made when coping a test-case.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-20 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-error.exp: Use $gdb_test_file_name.
* gdb.dwarf2/dw2-line-number-zero.exp: Same.
* gdb.dwarf2/dw2-main-no-line-number.exp: Same.
* gdb.dwarf2/dw2-ranges-base.exp: Same.
* gdb.dwarf2/dw2-ranges.exp: Same.
* gdb.dwarf2/dw2-vendor-extended-opcode.exp: Same.
* gdb.dwarf2/var-access.exp: Same.
PR tui/26719 points out that switching the focus can erase the TUI
source window. This is a regression introduced by the patch to switch
the source window to using a pad.
This patch fixes the bug by arranging to call prefresh whenever the
window is refreshed.
2020-10-19 Tom Tromey <tromey@adacore.com>
PR tui/26719
* tui/tui-winsource.h (struct tui_source_window_base)
<refresh_window>: Rename from refresh_pad.
* tui/tui-winsource.c (tui_source_window_base::refresh_window):
Rename from refresh_pad.
(tui_source_window_base::show_source_content)
(tui_source_window_base::do_scroll_horizontal): Update.
gdb/testsuite/ChangeLog
2020-10-19 Tom Tromey <tromey@adacore.com>
PR tui/26719
* gdb.tui/list.exp: Check source window contents after focus
change.
The help text of 'info threads' is below:
(gdb) help info threads
Display currently known threads.
Usage: info threads [OPTION]... [ID]...
Options:
-gid
Show global thread IDs.If ID is given, it is a space-separated list of IDs of threads to display.
Otherwise, all threads are displayed.
(gdb)
I think the "If ID is given ..." info should have come right below
the the usage line. This patch reorganizes the text so that we get
(gdb) help info threads
Display currently known threads.
Usage: info threads [OPTION]... [ID]...
If ID is given, it is a space-separated list of IDs of threads to display.
Otherwise, all threads are displayed.
Options:
-gid
Show global thread IDs.
(gdb)
gdb/ChangeLog:
2020-10-19 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* thread.c (_initialize_thread): Fine-tune the help text of
'info threads'.
Tested by rebuilding.
gdb/ChangeLog:
2020-10-19 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* frame.c: Remove the unused 'uinteger_option_def' type alias.
This fixes a regression introduced by the following commit:
fe053b9e85 gdb/jit: pass the jiter objfile as an argument to jit_event_handler
In the refactoring `handle_jit_event` function was changed to pass a matching
objfile pointer to the `jit_event_handler` explicitly, rather using internal
storage:
```
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -5448,8 +5448,9 @@ handle_jit_event (void)
frame = get_current_frame ();
gdbarch = get_frame_arch (frame);
+ objfile *jiter = symbol_objfile (get_frame_function (frame));
- jit_event_handler (gdbarch);
+ jit_event_handler (gdbarch, jiter);
```
This was needed to add support for multiple jiters. However it has also
introduced a regression, because `get_frame_function (frame)` here may
return `nullptr`, resulting in a crash.
A more resilient way would be to use an approach mirroring
`jit_breakpoint_re_set` - to find a minimal symbol matching the
breakpoint location and use its object file. We know that this
breakpoint event comes from a breakpoint set by `jit_breakpoint_re_set`,
thus using the reverse approach should be reliable enough.
gdb/Changelog:
2020-10-14 Mihails Strasuns <mihails.strasuns@intel.com>
* breakpoint.c (handle_jit_event): Add an argument, change how
`jit_event_handler` is called.
Currently pointers to all partial symbols are stored in two vectors;
and then indices into these vectors are stored in each partial_symtab.
This patch changes this so that each partial symtab instead has
vectors of symbols. add_psymbol_to_list can now be changed into a
method on partial_symtab as well.
My main motivation for doing this is that I am looking into calling
sort_pst_symbols in the background. However, I haven't actually
implemented this yet. (Also this may make it more feasible to also
sort the static psymbols, though I haven't tried that either.)
Also, though, this lets us remove the "current_global_psymbols"
vector, because now the callers can simply refer directly to the
psymtab that they are modifying (formerly this was implicit).
The main drawback of this patch is that it increases the size of
partial symtab.
gdb/ChangeLog
2020-10-17 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_end_psymtab): Use partial_symtab::empty.
(scan_xcoff_symtab): Update.
* psymtab.h (class psymtab_storage) <global_psymbols,
static_psymbols, current_global_psymbols,
current_static_psymbols>: Remove.
* psymtab.c (require_partial_symbols, find_pc_sect_psymbol)
(match_partial_symbol, lookup_partial_symbol): Update.
(print_partial_symbols): Change parameters.
(dump_psymtab, recursively_search_psymtabs)
(psym_fill_psymbol_map, psym_find_compunit_symtab_by_address)
(sort_pst_symbols, partial_symtab::partial_symtab): Update.
(concat): Remove.
(end_psymtab_common): Simplify.
(append_psymbol_to_list): Change parameters.
(partial_symtabs::add_psymbol): Rename from add_psymbol_to_list.
(init_psymbol_list): Simplify.
(maintenance_info_psymtabs, maintenance_check_psymtabs): Update.
* psympriv.h (struct partial_symtab) <empty>: New method.
<globals_offset, n_global_syms, statics_offset, n_static_syms>:
Remove.
<global_psymbols, static_psymbols>: New members.
<add_psymbol>: New methods.
(add_psymbol_to_list): Don't declare.
(psymbol_placement): Move earlier.
* mdebugread.c (parse_partial_symbols): Update.
(handle_psymbol_enumerators): Change parameters.
(mdebug_expand_psymtab): Update.
* dwarf2/read.c (process_psymtab_comp_unit_reader)
(add_partial_symbol): Update.
* dwarf2/index-write.c (write_psymbols): Change parameters.
(write_one_signatured_type): Update.
(recursively_count_psymbols): Update.
(recursively_write_psymbols): Update.
(class debug_names) <recursively_write_psymbols>: Update.
<write_psymbols>: Change parameters.
<write_one_signatured_type>: Update.
* dbxread.c (read_dbx_symtab): Update.
(dbx_end_psymtab): Use partial_symtab::empty.
* ctfread.c (struct ctf_context) <pst>: New member.
(create_partial_symtab): Set it.
(ctf_psymtab_type_cb, ctf_psymtab_var_cb): Update.
(scan_partial_symbols): Use the psymtab's context. Update.
I ran across this comment in valprint.c:
/* FIXME: create_static_range_type does not set the unsigned bit in a
range type (I think it probably should copy it from the target
type), so we won't print values which are too large to
fit in a signed integer correctly. */
It seems to me that a range type ought to inherit its signed-ness from
the underlying type, so this patch implements this change, and removes
the comment. (It was also copied into m2-valprint.c.)
I also remove the comment about handling ranges of enums, because I
think that comment is incorrect.
gdb/ChangeLog
2020-10-17 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print): Remove comment.
* m2-valprint.c (m2_value_print_inner): Remove comment.
* gdbtypes.c (create_range_type): Set TYPE_UNSIGNED from base
type.
When setting a breakpoint on a line in an executable without debug line info,
we run into an abort.
The problem occurs when calling set_default_source_symtab_and_line, which
calls select_source_symtab (0), which is where we try to find the line number
for main:
...
/* Make the default place to list be the function `main'
if one exists. */
block_symbol bsym = lookup_symbol (main_name (), 0, VAR_DOMAIN, 0);
if (bsym.symbol != nullptr && SYMBOL_CLASS (bsym.symbol) == LOC_BLOCK)
{
symtab_and_line sal = find_function_start_sal (bsym.symbol, true);
loc->set (sal.symtab, std::max (sal.line - (lines_to_list - 1), 1));
return;
}
...
However, due to the missing debug line info, find_function_start_sal returns a
sal with sal.symtab == 0:
...
(gdb) p /x sal
$2 = {pspace = 0x1a4a7f0, symtab = 0x0, symbol = 0x1d9e480, section = 0x1d5b398,
msymbol = 0x0, line = 0x0, pc = 0x4004ab, end = 0x0, explicit_pc = 0x0,
explicit_line = 0x0, is_stmt = 0x0, prob = 0x0, objfile = 0x0}
...
which eventually causes an segfault in create_sals_line_offset because
self->default_symtab->filename is accessed while self->default_symtab == NULL.
Fix this by handling sal.symtab == NULL in select_source_symtab.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-10-17 Tom de Vries <tdevries@suse.de>
PR symtab/26317
* source.c (select_source_symtab): Handling sal.symtab == NULL for
symbol main.
gdb/testsuite/ChangeLog:
2020-10-17 Tom de Vries <tdevries@suse.de>
PR symtab/26317
* gdb.dwarf2/dw2-main-no-line-number.exp: New file.
Commit 5b7d00507b adds a mention at gdb_breakpoint of a supported argument
"passfail". There's no corresponding argument handling though.
Remove the mention of the "passfail" argument.
gdb/testsuite/ChangeLog:
2020-10-16 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_breakpoint): Remove mention of "passfail".
I noticed that an abort when setting a breakpoint does not result in more
than:
...
(gdb) break 27^M
FAIL: gdb.a/b.exp: setting breakpoint at 27 (eof)
...
Handle this more verbosely, as is done in gdb_test_multiple, such that we have
instead:
...
(gdb) break 27^M
ERROR: GDB process no longer exists
GDB process exited with wait status 29309 exp9 0 0 CHILDKILLED SIGABRT SIGABRT
UNRESOLVED: gdb.a/b.exp: setting breakpoint at 27 (eof)
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-16 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_breakpoint): Handle eof as in gdb_test_multiple.
