The extended instructions implemented in powerpc_macros aren't used by
the disassembler. That means instructions like "sldi r3,r3,2" appear
in disassembly as "rldicr r3,r3,2,61", which is annoying since many
other extended instructions are shown.
Note that some of the instructions moved out of the macro table to the
opcode table won't appear in disassembly, because they are aliases
rather than a subset of the underlying raw instruction. If enabled,
rotrdi, extrdi, extldi, clrlsldi, and insrdi would replace all
occurrences of rotldi, rldicl, rldicr, rldic and rldimi. (Or many
occurrences in the case of clrlsldi if n <= b was added to the extract
functions.)
The patch also fixes a small bug in opcode sanity checking.
include/
* opcode/ppc.h (PPC_OPSHIFT_SH6): Define.
opcodes/
* ppc-opc.c (insert_erdn, extract_erdn, insert_eldn, extract_eldn),
(insert_crdn, extract_crdn, insert_rrdn, extract_rrdn),
(insert_sldn, extract_sldn, insert_srdn, extract_srdn),
(insert_erdb, extract_erdb, insert_csldn, extract_csldb),
(insert_irdb, extract_irdn): New functions.
(ELDn, ERDn, ERDn, RRDn, SRDn, ERDb, CSLDn, CSLDb, IRDn, IRDb):
Define and add associated powerpc_operands entries.
(powerpc_opcodes): Add "rotrdi", "srdi", "extrdi", "clrrdi",
"sldi", "extldi", "clrlsldi", "insrdi" and corresponding record
(ie. dot suffix) forms.
(powerpc_macros): Delete same from here.
gas/
* config/tc-ppc.c (insn_validate): Don't modify value passed
to operand->insert for PPC_OPERAND_PLUS1 when calculating mask.
Handle PPC_OPSHIFT_SH6.
* testsuite/gas/ppc/prefix-reloc.d: Update.
* testsuite/gas/ppc/simpshft.d: Update.
ld/
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/notoc.d: Update.
* testsuite/ld-powerpc/notoc3.d: Update.
* testsuite/ld-powerpc/tlsdesc2.d: Update.
* testsuite/ld-powerpc/tlsget.d: Update.
* testsuite/ld-powerpc/tlsget2.d: Update.
* testsuite/ld-powerpc/tlsopt5.d: Update.
* testsuite/ld-powerpc/tlsopt6.d: Update.
The save of r2 in __glink_PLTresolve is the culprit. Remove it,
unless we know we need it for --plt-localentry. --plt-localentry
should not be used with power10 pc-relative code that makes tail
calls.
The patch also removes use of r2 as a scratch reg in the ELFv2
__glink_PLTresolve. Using r2 isn't a problem, this is just reducing
the number of scratch regs.
bfd/
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Depend on has_plt_localentry0.
(LD_R0_0R11, ADD_R11_R0_R11): Define.
(ppc64_elf_tls_setup): Disable params->plt_localentry0 when power10
code detected.
(ppc64_elf_size_stubs): Update __glink_PLTresolve eh_frame.
(ppc64_elf_build_stubs): Move r2 save to start of __glink_PLTresolve,
and only emit for has_plt_localentry0. Don't use r2 in the stub.
ld/
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/notoc2.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsopt5.d,
* testsuite/ld-powerpc/tlsopt5.wf,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: Update __glink_PLTresolve.
Stripping .rela.branch_lt is easy enough but messes with the
testsuite due to stub symbols (that use section id) changing. Tests
that run on more than one target variant can be tricky to fix, this
renaming happened to work.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Strip relbrlt too.
ld/
* testsuite/ld-powerpc/tlsopt5.s: Rename foo to aaaaa.
* testsuite/ld-powerpc/tlsopt5.d: Adjust to suit.
* testsuite/ld-powerpc/tlsopt6.d: Likewise.
This implements register saving and restoring in the __tls_get_addr
call stub, so that when glibc supports the optimized tls call stub gcc
can generate code that assumes only r0, r12 and of course r3 are
changed on a __tls_get_addr call. When gcc expects __tls_get_addr
calls to preserve registers the call will be to __tls_get_addr_desc,
which will be translated by the linker to a call to __tls_get_addr_opt.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add no_tls_get_addr_regsave.
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_desc and
tga_desc_fd.
(is_tls_get_addr): Match tga_desc and tga_desc_df too.
(STDU_R1_0R1, ADDI_R1_R1): Define.
(tls_get_addr_prologue, tls_get_addr_epilogue): New functions.
(ppc64_elf_tls_setup): Set up tga_desc and tga_desc_fd. Indirect
tga_desc_fd to opt_fd, and tga_desc to opt. Set
no_tls_get_addr_regsave.
(branch_reloc_hash_match): Add hash3 and hash4.
(ppc64_elf_tls_optimize): Handle tga_desc_fd and tga_desc too.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_relocate_section): Likewise.
(plt_stub_size, build_plt_stub): Likewise. Size regsave
__tls_get_addr stub.
(build_tls_get_addr_stub): Build regsave __tls_get_addr stub and
eh_frame.
(ppc_size_one_stub): Handle tga_desc_fd and tga_desc too. Size
eh_frame for regsave __tls_get_addr.
gas/
* config/tc-ppc.c (parse_tls_arg): Handle tls arg for
__tls_get_addr_desc and __tls_get_addr_opt.
ld/
* emultempl/ppc64elf.em (ppc64_opt, PARSE_AND_LIST_LONGOPTS),
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Support
--tls-get-addr-regsave and --no-tls-get-addr-regsave.
(params): Init new field.
* ld.texi (--tls-get-addr-regsave, --no-tls-get-addr-regsave):
Document.
* testsuite/ld-powerpc/tlsdesc.s,
* testsuite/ld-powerpc/tlsdesc.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsexenors.d,
* testsuite/ld-powerpc/tlsexenors.r,
* testsuite/ld-powerpc/tlsexers.d,
* testsuite/ld-powerpc/tlsexers.r,
* testsuite/ld-powerpc/tlsexetocnors.d,
* testsuite/ld-powerpc/tlsexetocrs.d,
* testsuite/ld-powerpc/tlsexetocrs.r,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: New.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
