* testsuite/ld-elf/merge.d: Remove csky from xfails, add moxie.
* testsuite/ld-elf/pr21884.d: Remove csky from xfails.
* testsuite/ld-elf/shared.exp: Add csky to list not xfailing pr22374.
* testsuite/ld-unique/pr21529.d: Remove csky from xfails
Fixes a couple of ERROR results due to .set difference on alpha.
* testsuite/ld-elf/shared.exp: Don't build pr19073 test on alpha.
* testsuite/ld-elf/pr18720b.c: Don't use .set on alpha.
Add testcases to verify that all SHT_NOTE sections with the same section
alignment are placed in a single PT_NOTE segment.
PR ld/23658
* testsuite/ld-elf/pr23658-1.d: New file.
* testsuite/ld-elf/pr23658-1a.s: Likewise.
* testsuite/ld-elf/pr23658-1b.s: Likewise.
* testsuite/ld-elf/pr23658-1c.s: Likewise.
* testsuite/ld-elf/pr23658-1d.s: Likewise.
* testsuite/ld-elf/pr23658-2.rd: Likewise.
* testsuite/ld-elf/pr23658-3.d: Likewise.
* testsuite/ld-elf/pr23658-3.s: Likewise.
* testsuite/ld-elf/pr23658-3.t: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23658 tests.
Remove:
FAIL: DT_TEXTREL map file warning
introduced with commit 63c1f59d66 ("readonly_dynrelocs"), coming from
the lack of a "dynamic relocation against `foo' in read-only section
`.rodata'" warning message produced.
The cause of the failure is that for sections which have dynamic
relocations attached the MIPS backend sets SHF_WRITE, in
`mips_elf_create_dynamic_relocation', yielding:
$ readelf -S textrel.so | grep rodata
[ 8] .rodata PROGBITS 00000254 000254 000004 00 WA 0 0 1
$
so the section is read/write and therefore there is nothing to warn
about.
This arrangement came from commit 7403cb6305 ("PATCH for N32 ABI"),
<https://sourceware.org/ml/binutils/1999-q2/msg00375.html>, i.e. for all
practical purposes it has been there since forever, and therefore it can
be considered a part of the ABI and the test case irrelevant for MIPS
targets.
We don't have a clean way to request UNSUPPORTED result, which would be
the most appropriate here, so just XFAIL the test instead.
ld/
* testsuite/ld-elf/shared.exp: XFAIL DT_TEXTREL map file warning
test for `mips*-*-*'.
Many ELF targets arrange to emit a number of section symbols in
.dynsym for use by dynamic relocations. This happens before the
dynamic relocations are output, and the need for those symbols
determined. In most cases they are not needed. A proper analysis of
the need for dynamic section symbols is target specific and tedious,
so this patch just excludes them in the obvious case when no
dynamic relocations are present.
The patch also runs the new pr23161 and pr23162 tests on more targets.
bfd/
* elf-bfd.h (struct elf_link_hash_table): Add "dynamic_relocs".
* elflink.c (_bfd_elf_init_2_index_sections): Comment fix.
(_bfd_elf_add_dynamic_entry): Set "dynamic_relocs".
(_bfd_elf_link_renumber_dynsyms): Exclude all section symbols when
"dynamic_relocs" is not set.
* elfxx-mips.c (count_section_dynsyms): Likewise.
ld/
* testsuite/ld-elf/readelf.exp: Delete DUMP and selection of
variant ver_def.vd.
* testsuite/ld-elf/ver_def-tic6x.vd: Delete.
* testsuite/ld-elf/shared.exp: Run most pr23161 and pr23162 tests for
linux, nacl and gnu targets.
* testsuite/ld-mips-elf/mips-elf.exp: Set base_syms to 1.
* testsuite/ld-elf/pr23161a.rd: Don't check reloc type. Allow any
order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23161b.rd: Don't check plt and dyn relocs.
Allow and order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23162.rd: Fail if __bss_start, _edata or _end
relocs are present rather than testing for no relocations.
* testsuite/ld-aarch64/gc-plt-relocs.d,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-arm/farcall-mixed-lib-v4t.d,
* testsuite/ld-arm/farcall-mixed-lib.d,
* testsuite/ld-arm/gc-hidden-1.d,
* testsuite/ld-arm/tls-gdesc-got.d,
* testsuite/ld-arm/tls-lib-loc.d,
* testsuite/ld-arm/tls-longplt-lib.d,
* testsuite/ld-arm/tls-thumb1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-mips-elf/mips16-pic-4a.nd,
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd,
* testsuite/ld-mips-elf/pie-n32.d,
* testsuite/ld-mips-elf/pie-n64.d,
* testsuite/ld-mips-elf/pie-o32.d: Update for removed dynamic
section symbols.
__bss_start, _end and _edata are defined by linker to mark regions
within executables and shared libraries. All references within
executables should be locally resolved.
This patch doesn't change how their references within shared libraries
are resolved.
bfd/
PR ld/23162
* elfxx-x86.c (elf_x86_linker_defined): New function.
(_bfd_x86_elf_link_check_relocs): Use it to mark __bss_start,
_end and _edata locally defined within executables.
ld/
PR ld/23162
* testsuite/ld-elf/pr23162.map: New file.
* testsuite/ld-elf/pr23162.rd: Likewise.
* testsuite/ld-elf/pr23162a.c: Likewise.
* testsuite/ld-elf/pr23162b.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23162 tests.
Add $AFLAGS_PIC flags for PIC assembly to a number of tests missing them
and remove `tic6x-*-*' XFAIL annotations from them, previously added to
paper over:
.../ld-new: warning: generating a shared library containing non-PID code
error messages produced due to `-mpic -mpid=near' GAS options having not
been used. Such errors now do not happen anymore, removing:
XFAIL: Build shared library for pr14170
XFAIL: PR ld/21703 shared
XFAIL: Build shared library for broken linker script test
XFAIL: Build pr17068.so
XFAIL: -Bsymbolic-functions
XFAIL: Build pr20995.so
XFAIL: Build pr22374 shared library
with `tic6x-elf' and `tic6x-uclinux' targets. These tests now pass all
except for:
FAIL: PR ld/21703 shared
which is now due to a different reason, as follows:
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^Symbol table '\.dynsym' contains [0-9]+ entries:$"
EOF from dump.out
FAIL: PR ld/21703 shared
The addition of $AFLAGS_PIC requires the affected test cases to use the
`list' command rather than `{}' characters to create a list, to avoid
the quoting property `{}' also have in TCL. Consequently the change is
slightly more extensive than it could otherwise be.
ld/
* testsuite/ld-elf/shared.exp: Add $AFLAGS_PIC throughout to PIC
assembly builds where missing and remove `tic6x-*-*' XFAIL
markings accordingly.
Correct LD test suite failures with VR4100, VR4300 and VR5000 bare metal
MIPS/ELF targets which do not default to linking with shared libraries,
which leads to link failures like:
.../ld/ld-new: cannot find -lcomm-data
FAIL: Common symbol override test
or:
.../ld/ld-new: attempted static link of dynamic object `tmpdir/pr14170.so'
FAIL: PR ld/14170
removing:
FAIL: Build pr22471b.so
FAIL: Build pr22471
FAIL: Build pr22649-2b.so
FAIL: Build pr22649-2d.so
FAIL: Build pr22150
FAIL: PR ld/14170
FAIL: --gc-sections with __gxx_personality
test failures.
ld/
* testsuite/ld-elf/comm-data.exp: Pass `-call_shared' to links
involving a shared library for `mips*vr4100*-*-elf*',
`mips*vr4300*-*-elf*' and `mips*vr5000*-*-elf*' targets.
* testsuite/ld-elf/provide-hidden.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-mips-elf/comm-data.exp: Likewise.
Move those ELF shared library tests that are in ld-elf/elf.exp over to
ld-elf/shared.exp, to keep them all together and make the maintenance of
extra flags needed with some targets and shared library builds easier,
and also removing the need for the large:
if { [check_shared_lib_support] } then {
[...]
}
conditional block and consequently reducing indentation, which always
helps with TCL code. No functional change, except for the order of
individual test case execution which has changed accordingly, i.e. the
test results are shuffled.
ld/
* testsuite/ld-elf/elf.exp: Move shared library tests over to...
* testsuite/ld-elf/shared.exp: ... here.
We really need to check for a dynamic def, not only a ref.
See added testcase.
bfd/
* elflink.c (bfd_elf_define_start_stop): Fix check of
def_dynamic.
ld/
* testsuite/ld-elf/pr21964-5.c: New test.
* testsuite/ld-elf/shared.exp: Run it.
Define __start/__stop symbols if they are referenced by shared objects,
not if they are also defined in shared objects.
bfd/
PR ld/21964
* elflink.c (bfd_elf_define_start_stop): Check if __start and
__stop symbols are referenced by shared objects.
ld/
PR ld/21964
* testsuite/ld-elf/pr21964-4.c: New file.
* testsuite/ld-elf/shared.exp: Run pr21964-4 test on Linux.
Fix commit d664fd41e1 ("Ignore dynamic references on forced local
symbols") and use alternative test actions and match patterns to
correctly handle messages like:
.../ld/ld-new: Removing unused section '.reginfo' in file 'tmpdir/pr22649-2b.o'
or:
.../ld/ld-new: Removing unused section '.MIPS.options' in file 'tmpdir/pr22649-2b.o'
produced by LD on MIPS targets, removing:
FAIL: Build pr22649-2c.so
FAIL: Build pr22649-2d.so
test suite failures and tightening checks made with `pr22649-2a.so' and
`pr22649-2b.so' test cases.
Keep the original empty action with `pr22649-2c.so' and `pr22649-2d.so'
links and MIPS/ELF targets though, because for them the linker does not
garbage-collect the `.reginfo' section. This is because the section has
its flags set differently by code in GAS in `md_begin':
if (strncmp (TARGET_OS, "elf", 3) != 0)
flags |= SEC_ALLOC | SEC_LOAD;
and consequently BFD linker code in `_bfd_elf_gc_mark_extra_sections':
else if (((isec->flags & SEC_DEBUGGING) != 0
|| (isec->flags & (SEC_ALLOC | SEC_LOAD | SEC_RELOC)) == 0)
&& elf_next_in_group (isec) == NULL)
isec->gc_mark = 1;
marks these sections to be kept due to their SEC_ALLOC, SEC_LOAD and
SEC_RELOC flags all being zero (`.reginfo' sections never have
relocations attached).
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-2ab-mips.msg: New stderr output.
* testsuite/ld-elf/pr22649-2cd-mips.msg: New stderr output.
* testsuite/ld-elf/shared.exp: Use the new outputs with
`mips*-*-*' targets.
bfd/
* elflink.c (bfd_elf_define_start_stop): Make __start and __stop
symbols dynamic.
ld/
* testsuite/ld-elf/pr21964-3a.c: New file.
* testsuite/ld-elf/pr21964-3c.c: New file.
* testsuite/ld-elf/shared.exp: Run new __start/__stop testcase.
On the SPARC architecture, you need to pass a special flag to GNU as
when you're assembling PIC/PIE code or else you get a wrong relocation
for the GOT symbol.
ld/
* testsuite/ld-elf/shared.exp (AFLAGS_PIC): Define on SPARC.
(pr22269-1): Pass AFLAGS_PIC to the assembler.
PowerPC64 has its own mark_dynamic_ref, which needs the same change as
made by d664fd41e1 to the generic ELF version. Some other targets
discard more than just .data, so allow for that too in expected ld
messages.
bfd/
PR ld/22649
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649.msg: Allow other messages.
* testsuite/ld-elf/shared.exp: Check that --gc-sections is
supported before running ld/22649 tests.
We should ignore dynamic references on forced local symbols during
garbage collection since they can never be referenced dynamically.
bfd/
PR ld/22649
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-1.s: New file.
* testsuite/ld-elf/pr22649-2a.s: Likewise.
* testsuite/ld-elf/pr22649-2b.s: Likewise.
* testsuite/ld-elf/pr22649.msg: Likewise.
* testsuite/ld-elf/shared.exp: Run ld/22649 tests.
In early October, HJ Lu added support for a number of targets to "Dump
dynamic relocation in read-only section with minfo". This extends
that support to more targets, displays the symbol involved, and splits
the existing function that sets TEXTREL into a "readonly_dynrelocs"
and "maybe_set_textrel" function. I'll need "readonly_dynrelocs" if I
ever get around to fixing "pr22374 function pointer initialization"
fails.
am33_2.0, arc, bfin, hppa64, mn10300, and nios2 fail to mark a binary
needing text relocations with DT_TEXTREL. That's not good. xtensa also
fails to do so but complains about "dangerous relocation: dynamic
relocation in read-only section" so I reckon that is fine and have
marked the test as an xfail. The other targets need maintainer
attention.
Curiously, the map file dump wasn't added for x86, so the map test
currently fail on x86. It also fails on alpha, am33_2.0, arc, bfin,
hppa64, ia64, m68k, mips, mn10300, nios2, score and vax. cris
complains with "tmpdir/textrel.o, section .rodata: relocation
R_CRIS_32 should not be used in a shared object; recompile with -fPIC"
so I've marked it as an xfail.
bfd/
* elf32-hppa.c (maybe_set_textrel): Print symbol for map file output.
* elf32-ppc.c (maybe_set_textrel): Likewise.
* elf64-ppc.c (maybe_set_textrel): Likewise.
* elf32-arm.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_arm_readonly_dynrelocs): ..this.
* elf32-lm32.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-m32r.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-metag.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-nds32.c: Delete unnecessary forward declarations.
(readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-or1k.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-sh.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-tic6x.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_tic6x_readonly_dynrelocs): ..this.
* elf32-tilepro.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf64-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfnn-aarch64.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(aarch64_readonly_readonly_dynrelocs): ..this.
* elfnn-riscv.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-sparc.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-tilegx.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
ld/
* testsuite/ld-elf/shared.exp: Run new textrel tests.
* testsuite/ld-elf/textrel.map: New file.
* testsuite/ld-elf/textrel.rd: New file.
* testsuite/ld-elf/textrel.s: New file.
* testsuite/ld-elf/textrel.warn: New file.
ASFLAGS should be restored after any modification. Fixes
metag-linux +FAIL: Long branch stub
metag-linux +FAIL: Long branch stub (PIC, app)
mn10300-elf +FAIL: difference of two same-section symbols where the difference is held in another section
mn10300-elf +FAIL: relaxation and alignment directives
PR 22471
* testsuite/ld-elf/shared.exp: Save and restore ASFLAGS.
* testsuite/ld-elf/shared.exp: Remove kfails.
The test-cases started passing with 5c3261b0e8,
"ELF: Call check_relocs after opening all inputs".
The lists could now be re-concatenated (see other run_ld_link_tests
calls in shared.exp), but are for now left separate to simplify future
kfail/xfailing.
This compile-time test requires a target C compiler to run. It fails
on many targets where ELF backend linkers fail to check undefined weak
symbol in static PIE via UNDEFWEAK_NO_DYNAMIC_RELOC.
PR ld/22269
* testsuite/ld-elf/pr22269-1.rd: New file.
* testsuite/ld-elf/pr22269-1.c: Likewise.
* testsuite/ld-elf/shared.exp: Run pr22269-1.
arm-none-eabi-ld supports shared libraries. However, the toolchain may be
configured to generate statically linked executable by default.
It is required to have --no-dynamic-linker option before adding dynamic symbol
to static executable.
For dynamically linked executable, the behavior won't change.
ld/ChangeLog
2017-06-13 Renlin Li <renlin.li@arm.com>
* testsuite/ld-elf/shared.exp (build_tests): Add --no-dynamic-linker
option to rdynamic-1 and dynamic-1 tests.
When -static -E/--dynamic-list are passed to linker, linker may create
executable with dynamic sections which aren't supported by run-time.
We require --no-dynamic-linker together with -static -E/--dynamic-list
before adding dynamic symbol table to static executable.
bfd/
PR ld/19617
PR ld/21086
* elflink.c (elf_link_add_object_symbols): Require
--no-dynamic-linker with -E/--dynamic-list when creating
dynamic sections.
ld/
PR ld/19617
PR ld/21086
* testsuite/ld-elf/pr19617a.d: Pass --no-dynamic-linker to ld.
* testsuite/ld-elf/pr19617b.d: Likewise.
* testsuite/ld-elf/pr19617c.d: Likewise.
*testsuite/ld-i386/pr19636-4d.d: Likewise.
* testsuite/ld-elf/readelf.exp: Pass --no-dynamic-linker to ld
with --export-dynamic.
* testsuite/ld-elf/shared.exp: Pass --no-dynamic-linker to ld
with -E.
Complement commit 902e9fc76a ("PR ld/20828: Move symbol version
processing ahead of GC symbol sweep"), commit b531344c34 ("PR
ld/20828: Reorder the symbol sweep stage of section GC") and commit
81ff47b3a5 ("PR ld/20828: Fix linker script symbols wrongly forced
local with section GC"), and prevent symbols forcibly entered in the
output file with the use of the `--undefined=' or `--require-defined='
linker command line options or the EXTERN linker script command from
being swept in section garbage collection and consequently recorded in
the dynamic symbol table as local entries. This happens in certain
circumstances, where a symbol reference also exists in one of the static
input files, however only in a section which is garbage-collected and
does not make it to the output file, and the symbol is defined in a
dynamic object present in the link.
For example with the `i386-linux' target and the `pr21233.s' and
`pr21233-l.s' sources, and the `pr21233.ld' linker script included with
this change we get:
$ as -o pr21233-l.o pr21233-l.s
$ ld -shared -T pr21233.ld -o libpr21233.so pr21233-l.o
$ as -o pr21233.o pr21233.s
$ ld --gc-sections -e foo --require-defined=bar -T pr21233.ld -o pr21233 pr21233.o libpr21233.so
$ readelf --dyn-syms pr21233
Symbol table '.dynsym' contains 2 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 OBJECT LOCAL DEFAULT UND bar
$
which makes the run-time `bar' dependency of the `pr21233' executable
different from its corresponding link-time dependency, i.e. the presence
of `libpr21233.so' and its `bar' symbol is required at the link time,
however at the run time a copy of `libpr21233.so' without `bar' will do.
Similarly with `--undefined=' and EXTERN which do not actually require
the reference to the symbol requested to be satisfied with a definition
at the link time, however once the definition has been pulled at the
link time, so it should at the dynamic load time.
Additionally with the `mips-linux' target we get:
$ ld --gc-sections -e foo --require-defined=bar -T pr21233.ld -o pr21233 pr21233.o libpr21233.so
ld: BFD (GNU Binutils) 2.28.51.20170324 assertion fail .../bfd/elfxx-mips.c:3861
$
as the target is not prepared to handle such a local dynamic symbol.
With this change in effect we get:
$ readelf --dyn-syms pr21233
Symbol table '.dynsym' contains 2 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 OBJECT GLOBAL DEFAULT UND bar
$
instead, for both targets.
ld/
PR ld/21233
* ldlang.c (insert_undefined): Set `mark' for ELF symbols.
* testsuite/ld-elf/pr21233.sd: New test.
* testsuite/ld-elf/pr21233-l.sd: New test.
* testsuite/ld-elf/pr21233.ld: New test linker script.
* testsuite/ld-elf/pr21233-e.ld: New test linker script.
* testsuite/ld-elf/pr21233.s: New test source.
* testsuite/ld-elf/pr21233-l.s: New test source.
* testsuite/ld-elf/shared.exp: Run the new tests.
This gcc option isn't well supported, so use the actual linker option
we want to test.
* testsuite/ld-elf/shared.exp: Use -Wl,-export-dynamic rather
than -rdynamic.
Complement commit b531344c34 ("PR ld/20828: Reorder the symbol sweep
stage of section GC") and commit 81ff47b3a5 ("PR ld/20828: Fix linker
script symbols wrongly forced local with section GC") and move symbol
version processing ahead of the symbol sweep stage of section GC, all in
`bfd_elf_size_dynamic_sections', so that version symbols created stay in
the global scope and are not output as local symbols to the dynamic
symbol table in the presence of corresponding symbol definitions pulled
from a DSO involved in a link.
Consolidate the whole of symbol version processing into a single block
from all parts scattered across the function and rearranging the local
variables used as necessary, however leaving the setting of dynamic
entries associated with the DT_VERDEF, DT_VERDEFNUM, DT_VERNEED and
DT_VERNEEDNUM tags and the SEC_EXCLUDE flag for unused `.gnu.version'
section in the original places.
With the rearrangement of code blocks `Elf_Internal_Verneed *t' would
shadow the previous definition of `struct bfd_elf_version_tree *t', so
rename the former variable to `vn'.
bfd/
PR ld/20828
* elflink.c (bfd_elf_size_dynamic_sections): Move symbol version
processing ahead of the call to `elf_gc_sweep_symbol'.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828-d.sd: New test.
* testsuite/ld-elf/pr20828-e.sd: New test.
* testsuite/ld-elf/pr20828-v.od: New test.
* testsuite/ld-elf/pr20828-v.ver: New test version script.
* testsuite/ld-elf/pr20828-v.ld: New test linker script.
* testsuite/ld-elf/pr20828.ld: Add `.gnu.version' and
`.gnu.version_d'.
* testsuite/ld-elf/shared.exp: Run the new tests.
When looking up file and line information (used from the linker to
report error messages) if no symbol is passed in, then use the symbol
list to look for a matching symbol.
If a matching symbol is found then use this to look up the file / line
information.
This should improve errors when looking up file / line information for
data sections. Hopefully we should find a matching data symbol, which
should, in turn (we hope) match a DW_TAG_variable in the DWARF, this
should allow us to give accurate file / line errors for data symbols.
As the hope is to find a matching DW_TAG_variable in the DWARF then we
ignore section symbols, and prefer global symbols to locals.
bfd/ChangeLog:
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Perform symbol lookup
before trying to fine matching file and line information.
ld/ChangeLog:
* testsuite/ld-elf/shared.exp: Update expected results.
* testsuite/ld-elf/dwarf2.err: Likewise
This commit adds new actions to the run_cc_link_tests mechanism in the
linker testsuite.
Previously this procedure could take a parameter containing a regular
expression that would be matched against warnings from the linker.
After this commit the warnings parameter is removed, instead, the
actions list can contain the actions 'warning', 'error',
'warning_output', or 'error_output'. The action names are chosen to
match the actions already present in the run_dump_test procedure.
These new actions allow for the current warning checking, but also allow
for checking of errors using a regular expression. More interestingly,
the *_output actions allow for the warning/error patterns to be placed
in a separate file.
The small number of tests that make use of the warning parameter have
been updated to the new mechanism. Later commits will make use of the
new features added in this commit.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_cc_link_tests): Add warning,
error, warning_output, and error_output actions. Remove separate
warnings parameter.
* testsuite/ld-elf/shared.exp (build_tests): Updated to use
'warning' action.
* testsuite/ld-plugin/lto.exp (lto_link_tests): Likewise.
ld/
* testsuite/lib/ld-lib.exp (check_libdl_available): New function.
* testsuite/ld-elf/shared.exp (run_tests): Split tests which require
dlopen support into "dlopen_run_tests". These tests include dl1*main
and dl6*main.
(dlopen_run_tests): New and only run it when check_libdl_available
returns true. XFAIL on *-*-netbsdelf*.
