gas needs to build lists of sections for each group. This arranges to
build the lists earlier, so they can be used when looking for sections
that belong to a group. Using the section hash table to find sections
by name, then by group isn't efficient when there are numerous groups
with the same section names. Using a hash table to quickly find a
group, then searching by section name on a list for the group results
in a 100-fold speed improvement assembling the testcase in this PR.
To reduce the number of times we traverse the section list, the patch
also moves some processing done in elf_adjust_symtab for linked-to
section, to elf_frob_file. This requires a testsuite change because
processing will stop before elf_frob_file if there is a parse error in
section21.s, ie. you'll only get the "junk at end of line" error, not
the "undefined linked-to symbol" errors.
PR 25333
* config/obj-elf.c (struct group_list, groups): Move earlier.
(match_section): New function, extracted from..
(get_section_by_match): ..here.
(free_section_idx): Move earlier.
(group_section_find, group_section_insert): New functions.
(change_section): Use the above.
(elf_set_group_name): New function.
(obj_elf_attach_to_group): Use elf_set_group_name.
(set_additional_section_info): Handle linked_to_symbol_name and
stabs code, extracted from..
(adjust_stab_sections): ..here,..
(build_additional_section_info): ..and here.
(elf_adjust_symtab): Don't call build_additional_section_info.
(elf_frob_file): Adjust.
* config/obj-elf.h (elf_set_group_name): Declare.
* config/tc-xtensa.c (cache_literal_section): Use elf_set_group_name.
(xtensa_make_property_section): Likewise.
* testsuite/gas/elf/attach-1.d: Stricter group section matching,
and changed group section ordering.
* testsuite/gas/elf/attach-2.d: Stricter group section matching.
* testsuite/gas/elf/attach-2.s: Provide section bar type.
* testsuite/gas/elf/elf.exp: Run attach-2.
* testsuite/gas/elf/section21.l: Update.
* testsuite/gas/elf/section21.s: Don't check for a parse error.
This patch adds support in GAS to create generic GAS instructions
(a.k.a., the ginsn) for the x86 backend (AMD64 ABI only at this time).
Using this ginsn infrastructure, GAS can then synthesize CFI for
hand-written asm for x86_64.
A ginsn is a target-independent representation of the machine
instructions. One machine instruction may need one or more ginsn.
This patch also adds skeleton support for printing ginsn in the listing
output for debugging purposes.
Since the current use-case of ginsn is to synthesize CFI, the x86 target
needs to generate ginsns necessary for the following machine
instructions only:
- All change of flow instructions, including all conditional and
unconditional branches, call and return from functions.
- All register saves and unsaves to the stack.
- All instructions affecting the two registers that could potentially
be used as the base register for CFA tracking. For SCFI, the base
register for CFA tracking is limited to REG_SP and REG_FP only for
now.
The representation of ginsn is kept simple:
- GAS instruction has GINSN_NUM_SRC_OPNDS (defined to be 2 at this time)
number of source operands and one destination operand at this time.
- GAS instruction uses DWARF register numbers in its representation and
does not track register size.
- GAS instructions carry location information (file name and line
number).
- GAS instructions are ID's with a natural number in order of their
addtion to the list. This can be used as a proxy for the static
program order of the corresponding machine instructions.
Note that, GAS instruction (ginsn) format does not support
GINSN_TYPE_PUSH and GINSN_TYPE_POP. Some architectures, like aarch64,
do not have push and pop instructions, but rather STP/LDP/STR/LDR etc.
instructions. Further these instructions have a variety of addressing
modes, like offset, pre-indexing and post-indexing etc. Among other
things, one of differences in these addressing modes is _when_ the addr
register is updated with the result of the address calculation: before
or after the memory operation. To best support such needs, the generic
instructions like GINSN_TYPE_LOAD, GINSN_TYPE_STORE together with
GINSN_TYPE_ADD, and GINSN_TYPE_SUB may be used.
The functionality provided in ginsn.c and scfi.c is compiled in when a
target defines TARGET_USE_SCFI and TARGET_USE_GINSN. This can be
revisited later when there are other use-cases of creating ginsn's in
GAS, apart from the current use-case of synthesizing CFI for
hand-written asm.
Support is added only for System V AMD64 ABI for ELF at this time. If
the user enables SCFI with --32, GAS issues an error:
"Fatal error: SCFI is not supported for this ABI"
For synthesizing (DWARF) CFI, the SCFI machinery requires the programmer
to adhere to some pre-requisites for their asm:
- Hand-written asm block must begin with a .type foo, @function
It is highly recommended to, additionally, also ensure that:
- Hand-written asm block ends with a .size foo, .-foo
The SCFI machinery encodes some rules which align with the standard
calling convention specified by the ABI. Apart from the rules, the SCFI
machinery employs some heuristics. For example:
- The base register for CFA tracking may be either REG_SP or REG_FP.
- If the base register for CFA tracking is REG_SP, the precise amount of
stack usage (and hence, the value of REG_SP) must be known at all times.
- If using dynamic stack allocation, the function must switch to
FP-based CFA. This means using instructions like the following (in
AMD64) in prologue:
pushq %rbp
movq %rsp, %rbp
and analogous instructions in epilogue.
- Save and Restore of callee-saved registers must be symmetrical.
However, the SCFI machinery at this time only warns if any such
asymmetry is seen.
These heuristics/rules are architecture-independent and are meant to
employed for all architectures/ABIs using SCFI in the future.
gas/
* Makefile.am: Add new files.
* Makefile.in: Regenerated.
* as.c (defined): Handle documentation and listing option for
ginsns and SCFI.
* config/obj-elf.c (obj_elf_size): Invoke ginsn_data_end.
(obj_elf_type): Invoke ginsn_data_begin.
* config/tc-i386.c (x86_scfi_callee_saved_p): New function.
(ginsn_prefix_66H_p): Likewise.
(ginsn_dw2_regnum): Likewise.
(x86_ginsn_addsub_reg_mem): Likewise.
(x86_ginsn_addsub_mem_reg): Likewise.
(x86_ginsn_alu_imm): Likewise.
(x86_ginsn_move): Likewise.
(x86_ginsn_lea): Likewise.
(x86_ginsn_jump): Likewise.
(x86_ginsn_jump_cond): Likewise.
(x86_ginsn_enter): Likewise.
(x86_ginsn_safe_to_skip): Likewise.
(x86_ginsn_unhandled): Likewise.
(x86_ginsn_new): New functionality to generate ginsns.
(md_assemble): Invoke x86_ginsn_new.
(s_insn): Likewise.
(i386_target_format): Add hard error for usage of SCFI with non AMD64 ABIs.
* config/tc-i386.h (TARGET_USE_GINSN): New definition.
(TARGET_USE_SCFI): Likewise.
(SCFI_MAX_REG_ID): Likewise.
(REG_FP): Likewise.
(REG_SP): Likewise.
(SCFI_INIT_CFA_OFFSET): Likewise.
(SCFI_CALLEE_SAVED_REG_P): Likewise.
(x86_scfi_callee_saved_p): Likewise.
* gas/listing.h (LISTING_GINSN_SCFI): New define for ginsn and
SCFI.
* gas/read.c (read_a_source_file): Close SCFI processing at end
of file read.
* gas/scfidw2gen.c (scfi_process_cfi_label): Add implementation.
(scfi_process_cfi_signal_frame): Likewise.
* subsegs.h (struct frch_ginsn_data): New forward declaration.
(struct frchain): New member for ginsn data.
* gas/subsegs.c (subseg_set_rest): Initialize the new member.
* symbols.c (colon): Invoke ginsn_frob_label to convey
user-defined labels to ginsn infrastructure.
* ginsn.c: New file.
* ginsn.h: New file.
* scfi.c: New file.
* scfi.h: New file.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
... after any (sub)section change. While certain existing target hooks
only look at now_seg, for a few others it looks as if failing to do so
could have caused anomalies if sub-sections were used. In any event a
subsequent x86 change is going to require the sub-section to be properly
in place at the time the hook is invoked.
This primarily means for obj_elf_section() to pass the new subsection
into change_section(), for it to be set right away (ahead of invoking
the hook).
Also adjust obj_elf_ident() to invoke the hook after all section
changes. (Note that obj_elf_version(), which also changes sections and
then changes them back, has no hook invocation at all so far, so none
are added. Presumably there is a reason for this difference in
behavior.)
No caller outside of obj-elf.c cares about the parameter - drop it by
introducing an obj-elf.c-internal wrapper.
While adding the new function parameter, take the opportunity and change
the adjacent boolean one to "bool".
get_stab_string_offset currently creates the stabstr section if not
already present, in the process keeping a reference to the malloc'd
section name string. Really, the name belongs in bfd_alloc'd memory
or some obstack so that it doesn't show as a memory leak on exit.
s_stab_generic at least does allocate the name for the stab section on
an obstack, but doesn't tidy that as well as it could. Return paths
after issuing a warning don't release the memory, nor the memory for
the "string" copy.
This patch fixes these problems. s_stab_generic is rearranged so that
creation of the sections occurs earlier, before any potential uses of
the note obstack during expression parsing. That makes it possible to
always free the section name strings unless used to create new
sections. I've also avoided get_absolute_expression_and_terminator
as I see that function might skip over end-of-line, and lack of a
--input_line_pointer might have caused the following source line to be
ignored. (Other uses of this function in gas are OK.)
* config/obj-coff.c (obj_coff_init_stab_section): Add stabstr
param. Pass to get_stab_string_offset rather than name of
section.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
(elf_init_stab_section): Adjust.
* config/obj-coff.h (INIT_STAB_SECTION): Update.
(obj_coff_init_stab_section): Update prototype.
* config/obj-som.h: Similarly.
* config/obj-elf.h: Similarly.
* config/obj-multi.h (INIT_STAB_SECTION): Update.
* obj.h (struct format_ops <init_stab_section>): Update.
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (cached_sec): Delete.
(stabs_begin): Adjust to suit.
(get_stab_string_offset): Add stabstr param, delete stabstr_name
and free_stabstr_secname params. Don't make stabstr section
here.
(eat_comma): New function.
(s_stab_generic): Replace stab_secname_obstack_end param with
bool freenames. Move creation of stab and stabstr sections
earlier, so the names can be freed earlier before possible use
of notes obstack during expression parsing. Tidy error paths
ensuring "string" is freed. Use get_absolute_expression in
place of get_absolute_expression_and_terminator.
(s_stab): Adjust.
(s_xstab): Use notes_concat to make stabstr section name.
While --sectname-subst is nice, it isn't enough to e.g. mimic
-f{function,data}-sections in assembly code, when such use is to be
optional (e.g. dependent upon some configuration setting).
Assign meaning to '+' and '-' as section attribute letters, allowing
to inherit the prior section's attributes (and possibly type) along
with adding or removing some. Note that documenting the interaction
with '?' as undefined is a precautionary measure.
While touching the function invocation, stop using |= on the result of
obj_elf_parse_section_letters(): "attr" is firmly zero ahead of the
call.
It's not documented anyway, and having it makes no sense anymore with
obj_elf_section_word() now being TC_SPARC-only. In any event the x86
backing function was dead code.
Freeing ecoff_debug_info "pointers to the unswapped symbolic info"
isn't a simple matter, due to differing allocation strategies. In
_bfd_ecoff_slurp_symbolic_info the pointers are to objalloc memory.
In the ecoff linker they are to separately malloc'd memory. In gas we
have most (obj-elf) or all (obj-ecoff) into a single malloc'd buffer.
This patch fixes the leaks for binutils and ld, leaving the gas leaks
for another day. The mips elf backend already had this covered, and
the ecoff backend had a pointer, raw_syments used as a flag, so most
of the patch is moving these around a little so they are accessible
for both ecoff and elf.
include/
* coff/ecoff.h (struct ecoff_debug_info): Add alloc_syments.
bfd/
* libecoff.h (struct ecoff_tdata): Delete raw_syments.
* elfxx-mips.c (free_ecoff_debug): Delete. Replace uses with
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_mips_elf_final_link): Init debug.alloc_syments.
* ecofflink.c (_bfd_ecoff_free_ecoff_debug_info): New function.
* ecoff.c (_bfd_ecoff_bfd_free_cached_info): Call
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_ecoff_slurp_symbolic_info): Replace uses of raw_syments
with alloc_syments.
(ecoff_final_link_debug_accumulate): Likewise. Use
_bfd_ecoff_free_ecoff_debug_info.
(_bfd_ecoff_bfd_copy_private_bfd_data): Set alloc_syments for
copied output.
* elf64-alpha.c (elf64_alpha_read_ecoff_info): Use
_bfd_ecoff_free_ecoff_debug_info.
* libbfd-in.h (_bfd_ecoff_free_ecoff_debug_info): Declare.
* libbfd.h: Regenerate.
gas/
* config/obj-ecoff.c (ecoff_frob_file): Set alloc_syments.
* config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
Well, it doesn't work on x86 or ppc, which both have # starting
comments anywhere on a line. I think it is therefore only useful on
sparc.
PR 11601
* config/obj-elf.c (obj_elf_section_word): Only compile for sparc.
(obj_elf_section): Only support solaris .section directive on
sparc.
* doc/as.texi (Section): Mention that solaris .section
directive is only supported for sparc.
Provide a way for config/obj-* to clean up at end of assembly, and do
so for ELF.
* obj.h (struct format_ops): Add "end".
* config/obj-aout.c (aout_format_ops): Init new field.
* config/obj-coff.c (coff_format_ops): Likewise.
* config/obj-ecoff.c (ecoff_format_ops): Likewise.
* config/obj-elf.c (elf_format_ops): Likewise.
(elf_begin): Move later in file. Clear some more variables.
(comment_section): Make file scope.
(free_section_idx): Rewrite.
(elf_adjust_symtab): Expand str_htab_create call and use
free_section_idx as delete function.
(elf_frob_file_after_relocs): Don't clean up groups.indexes here.
(elf_end): New function.
* config/obj-elf.h (obj_end): Define.
* config/obj-multi.h (obj_end): Define.
* output-file.c (output_file_close): Call obj_end.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
Using notes_calloc means all of the string hash table memory should
now be freed before gas exits, even though htab_delete isn't called.
This also means that the hash table free_f and del_f must be NULL,
because freeing notes obstack memory results in all more recently
allocated notes memory being freed too. So hash table resizing won't
free any memory, and will be a little faster. Also, htab_delete won't
do anything (and be quick about it).
Since htab_traverse can also resize hash tables (to make another
traversal faster if the table is largely empty), stop that happening
when only one traversal is done.
* as.h: Reorder hash.h after symbols.h for notes_calloc decl.
* hash.h (str_htab_create): Use notes_calloc. Do not free.
* symbols.c (resolve_local_symbol_values): Don't resize
during hash table traversal.
* config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
* config/tc-ia64.c (ia64_adjust_symtab, ia64_frob_file): Likewise.
* config/tc-nds32.c (nds32_elf_analysis_relax_hint): Likewise.
When handling section names in quotes obj_elf_section_name calls
demand_copy_C_string, which puts the name on the gas notes obstack.
Such strings aren't usually freed, since obstack_free frees all more
recently allocated objects as well as its arg. When handling
non-quoted names, obj_elf_section_name mallocs the name. Due to the
mix of allocation strategies it isn't possible for callers to free
names, if that was desirable. Partially fix this by always creating
names on the obstack, which is more efficient anyway. (You still
can't obstack_free on error paths due to the xtensa
tc_canonicalize_section_name.) Also remove a couple of cases where
the name is dup'd for no good reason as far as I know.
PR 29256
* config/obj-elf.c (obj_elf_section_name): Create name on notes
obstack.
(obj_elf_attach_to_group): Don't strdup group name.
(obj_elf_section): Likewise.
(obj_elf_vendor_attribute): Use xmemdup0 rather than xstrndup.
Make it a little more obvious that remap_debug_filename returns an
allocated string (that should be freed) by returning a char * rather
than const char *. Free a few missed cases in dwarf2dbg.c, and free
other memory allocated in dwarf2dbg.c. Also remove static
initialisation of variables and initialise in dwarf2_init instead,
in order to ensure gas state is saner for oss-fuzz.
* remap.c (remap_debug_filename): Remove const from return.
* as.h (remap_debug_filename): Update prototype.
* config/obj-elf.c (obj_elf_ident): Simplify free of
remap_debug_filename output.
* stabs.c (stabs_generate_asm_file): Likewise.
* dwarf2dbg.c (dirs, dirs_in_use, dirs_allocated, current): Don't
initialise statically..
(dwarf2_init): ..do so here, along with most other static vars.
(assign_file_to_slot): Don't set files_allocated until we
succeed in allocating memory.
(purge_generated_debug): Add bool param, free more stuff if true.
(dwarf2_directive_filename): Adjust purge_generated_debug call.
(process_entries): Don't free line_entry here..
(dwarf2_cleanup): ..do so here instead, new function.
(dwarf2_finish): Call dwarf2_cleanup. When chaining together
subseg line entries, unhook entries from old subseg list.
(dwarf2_directive_loc): Free remap_debug_filename string.
(out_dir_and_file_list): Likewise.
(out_debug_str): Likewise.
These were used originally to represent "# <line> <file>" constructs
inserted by (typically) compilers when pre-processing. Quite some time
ago they were replaced by .linefile though. Since the original
directives were never documented, we ought to be able to remove support
for them. As a result in a number of case function parameter aren't used
anymore and can hence be dropped.
For
```
.size foo1, 1
foo1:
.set bar1, foo1
.size bar1, 2
.size bar2, 2
.set bar2, foo1
.set bar3, foo2
.size bar3, 2
.size bar4, 2
.set bar4, foo2
.size foo2, 1
foo2:
```
bar1's size is 2 while bar2, bar3, bar4's is 1. The behavior of bar1 makes sense
(generally directives on the new symbol should win) and is relied upon by glibc
stdio-common/errlist.c:
```
.hidden _sys_errlist_internal
.globl _sys_errlist_internal
.type _sys_errlist_internal, @object
.size _sys_errlist_internal, 1072
_sys_errlist_internal:
.globl __GLIBC_2_1_sys_errlist
.set __GLIBC_2_1_sys_errlist, _sys_errlist_internal
.type __GLIBC_2_1_sys_errlist, %object
.size __GLIBC_2_1_sys_errlist, 125 * (64 / 8)
// glibc expects that .size __GLIBC_2_1_sys_errlist, 125 * (64 / 8) wins.
```
The behavior of bar2/bar3/bar4 seems brittle. To avoid the reordering of the two
code blocks which will result in the bar3 situation, glibc compiles errlist.c
with gcc -fno-toplevel-reorder (previously -fno-unit-at-a-time).
To fix the inconsistency and improve robustness, make bar2/bar3/bar4 match bar1,
removing the directive order sensitivity.
There is a pity that `.size dest, 0` is indistinguishable from the case where
dest is unset, but the compromise seems fine.
PR gas/29012
* config/obj-elf.c (elf_copy_symbol_attributes): don't copy if src's size
has been set.
* testsuite/gas/elf/elf.exp: New test.
* testsuite/gas/elf/size.d: New file.
* testsuite/gas/elf/size.s: Likewise.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
When a symbol removed by .symver is used in relocation and there is one
and only one versioned symbol, don't remove the symbol. Instead, mark
it to be removed and replace the removed symbol used in relocation with
the versioned symbol before generating relocation.
PR gas/28157
* symbols.c (symbol_flags): Add removed.
(symbol_entry_find): Updated.
(symbol_mark_removed): New function.
(symbol_removed_p): Likewise.
* symbols.h (symbol_mark_removed): New prototype.
(symbol_removed_p): Likewise.
* write.c (write_relocs): Call obj_fixup_removed_symbol on
removed fixp->fx_addsy and fixp->fx_subsy if defined.
(set_symtab): Don't add a symbol if symbol_removed_p returns true.
* config/obj-elf.c (elf_frob_symbol): Don't remove the symbol
if it is used on relocation. Instead, mark it as to be removed
and issue an error if the symbol has more than one versioned name.
(elf_fixup_removed_symbol): New function.
* config/obj-elf.h (elf_fixup_removed_symbol): New prototype.
(obj_fixup_removed_symbol): New.
* testsuite/gas/symver/symver11.d: Updated expected error
message.
* testsuite/gas/symver/symver16.d: New file.
* testsuite/gas/symver/symver16.s: Likewise.
Since SHF_GNU_RETAIN is allowed on all sections, strip SHF_GNU_RETAIN
when checking incorrect section attributes.
PR gas/27412
* config/obj-elf.c (obj_elf_change_section): Strip SHF_GNU_RETAIN
when checking incorrect section attributes.
* testsuite/gas/elf/elf.exp: Run section28 and section29.
* testsuite/gas/elf/section28.d: New file.
* testsuite/gas/elf/section28.s: Likewise.
* testsuite/gas/elf/section29.d: Likewise.
* testsuite/gas/elf/section29.s: Likewise.
For non-relocatable link with SHF_LINK_ORDER inputs, allow mixed indirect
and data inputs with ordered and unordered inputs:
1. Add pattern to bfd_section for the matching section name pattern in
linker script and update BFD_FAKE_SECTION.
2. Sort the consecutive bfd_indirect_link_order sections with the same
pattern to allow linker script to overdide input section order.
3. Place unordered sections before ordered sections.
4. Change the offsets of the indirect input sections only.
bfd/
PR ld/26256
* elflink.c (compare_link_order): Place unordered sections before
ordered sections.
(elf_fixup_link_order): Add a link info argument. Allow mixed
ordered and unordered input sections for non-relocatable link.
Sort the consecutive bfd_indirect_link_order sections with the
same pattern. Change the offsets of the bfd_indirect_link_order
sections only.
(bfd_elf_final_link): Pass info to elf_fixup_link_order.
* section.c (bfd_section): Add pattern.
(BFD_FAKE_SECTION): Initialize pattern to NULL.
* bfd-in2.h: Regenerated.
gas/
PR ld/26256
* config/obj-elf.c (obj_elf_change_section): Also filter out
SHF_LINK_ORDER.
ld/
PR ld/26256
* ldlang.c (gc_section_callback): Set pattern.
* testsuite/ld-elf/pr26256-1.s: New file.
* testsuite/ld-elf/pr26256-1.t: Likewise.
* testsuite/ld-elf/pr26256-1a.d: Likewise.
* testsuite/ld-elf/pr26256-1b.d: Likewise.
* testsuite/ld-elf/pr26256-2.s: Likewise.
* testsuite/ld-elf/pr26256-2.t: Likewise.
* testsuite/ld-elf/pr26256-2a.d: Likewise.
* testsuite/ld-elf/pr26256-2b-alt.d: Likewise.
* testsuite/ld-elf/pr26256-2b.d: Likewise.
* testsuite/ld-elf/pr26256-3.s: Likewise.
* testsuite/ld-elf/pr26256-3a.d: Likewise.
* testsuite/ld-elf/pr26256-3a.t: Likewise.
* testsuite/ld-elf/pr26256-3b.d: Likewise.
* testsuite/ld-elf/pr26256-3b.t: Likewise.
elfNN_bed was made writable as an expedient means of communicating
ld -z max-page-size and ld -z common-page-size values to BFD linker
code, and even for objcopy to communicate segment alignment between
copy_private_bfd_data, rewrite_elf_program_header and
assign_file_positions_for_load_sections. Some time later elfNN_bed
elf_osabi was written by gas. It turns out none of these
modifications to elfNN_bed was necessary, so make it const again.
include/
* bfdlink.h (struct bfd_link_info): Add maxpagesize and
commonpagesize.
bfd/
* elfxx-target.h (elfNN_bed): Constify.
* bfd.c (bfd_elf_set_pagesize): Delete.
(bfd_emul_set_maxpagesize, bfd_emul_set_commonpagesize): Delete.
* elf.c (get_program_header_size): Get commonpagesize from
link info.
(_bfd_elf_map_sections_to_segments): Get maxpagesize from link info.
(assign_file_positions_for_load_sections): Likewise.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Add maxpagesize param. Set map_p_align.
(copy_private_bfd_data): Don't call bfd_elf_set_maxpagesize.
Instead pass maxpagesize to rewrite_elf_program_header.
* elf32-nds32.c (relax_range_measurement): Add link_info param.
Get maxpagesize from link_info. Adjust caller.
* bfd-in2.h: Regenerate.
gas/
* config/obj-elf.c (obj_elf_section): Don't set elf_osabi here.
(obj_elf_type): Likewise.
ld/
* ld.h (ld_config_type): Delete maxpagesize and commonpagesize.
* emultempl/elf.em: Use link_info rather than config
for maxpagesize and commonpagesize.
* emultempl/ppc32elf.em: Likewise.
* ldexp.c (fold_binary, fold_name): Likewise.
* ldemul.c (after_parse_default): Likewise.
(set_output_arch_default): Don't call bfd_emul_set_maxpagesize
or bfd_emul_set_commonpagesize.
For
.globl foo2
.section .data.foo,"aR"
.align 4
.type foo2, @object
.size foo2, 4
foo2:
.long 2
.globl foo1
.section .data.foo
.align 4
.type foo1, @object
.size foo1, 4
foo1:
.long 1
generate a new section if the SHF_GNU_RETAIN bit doesn't match.
* config/obj-elf.c (SEC_ASSEMBLER_SHF_MASK): New.
(get_section_by_match): Also check if SEC_ASSEMBLER_SHF_MASK of
sh_flags matches. Rename info to sh_info.
(obj_elf_change_section): Don't check previous SHF_GNU_RETAIN.
Rename info to sh_info.
(obj_elf_section): Rename info to sh_info. Set sh_flags for
SHF_GNU_RETAIN.
* config/obj-elf.h (elf_section_match): Rename info to sh_info.
Add sh_flags.
* testsuite/gas/elf/elf.exp: Run section27.
* testsuite/gas/elf/section24b.d: Updated.
* testsuite/gas/elf/section27.d: New file.
* testsuite/gas/elf/section27.s: Likewise.
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI.
It is defined as follows:
=========================================================
Section Attribute Flags
+-------------------------------------+
| Name | Value |
+-------------------------------------+
| SHF_GNU_RETAIN | 0x200000 (1 << 21) |
+-------------------------------------+
SHF_GNU_RETAIN
The link editor should not garbage collect the section.
=========================================================
The .section directive accepts the "R" flag, which indicates
SHF_GNU_RETAIN should be applied to the section.
There is not a direct mapping of SHF_GNU_RETAIN to the BFD
section flag SEC_KEEP. Keeping these flags distinct allows
SHF_GNU_RETAIN sections to be explicitly removed by placing them in
/DISCARD/.
bfd/ChangeLog:
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain.
(struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain
for SHF_GNU_RETAIN.
(_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is
not supported by the OSABI.
Adjust error messages.
* elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from
input BFD to output BFD.
(bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set.
binutils/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN.
Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs.
* testsuite/binutils-all/readelf.exp: Run new tests.
Don't run run_dump_test when there isn't an assembler available.
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust
comment.
* testsuite/binutils-all/readelf-maskos-1a.d: New test.
* testsuite/binutils-all/readelf-maskos-1b.d: New test.
* testsuite/binutils-all/readelf-maskos.s: New test.
* testsuite/binutils-all/retain1.s: New test.
* testsuite/binutils-all/retain1a.d: New test.
* testsuite/binutils-all/retain1b.d: New test.
gas/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit
between section declarations.
(obj_elf_parse_section_letters): Handle 'R' flag.
Handle numeric flag values within the SHF_MASKOS range.
(obj_elf_section): Validate SHF_GNU_RETAIN usage.
* doc/as.texi: Document 'R' flag to .section directive.
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section22.d: New test.
* testsuite/gas/elf/section22.s: New test.
* testsuite/gas/elf/section23.s: New test.
* testsuite/gas/elf/section23a.d: New test.
* testsuite/gas/elf/section23b.d: New test.
* testsuite/gas/elf/section23b.err: New test.
* testsuite/gas/elf/section24.l: New test.
* testsuite/gas/elf/section24.s: New test.
* testsuite/gas/elf/section24a.d: New test.
* testsuite/gas/elf/section24b.d: New test.
include/ChangeLog:
* elf/common.h (SHF_GNU_RETAIN): Define.
ld/ChangeLog:
* NEWS: Announce support for SHF_GNU_RETAIN.
* ld.texi (garbage collection): Document SHF_GNU_RETAIN.
(Output Section Discarding): Likewise.
* testsuite/ld-elf/elf.exp: Run new tests.
* testsuite/ld-elf/retain1.s: New test.
* testsuite/ld-elf/retain1a.d: New test.
* testsuite/ld-elf/retain1b.d: New test.
* testsuite/ld-elf/retain2.d: New test.
* testsuite/ld-elf/retain2.ld: New test.
* testsuite/ld-elf/retain2.map: New test.
* testsuite/ld-elf/retain3.d: New test.
* testsuite/ld-elf/retain3.s: New test.
* testsuite/ld-elf/retain4.d: New test.
* testsuite/ld-elf/retain4.s: New test.
* testsuite/ld-elf/retain5.d: New test.
* testsuite/ld-elf/retain5.map: New test.
* testsuite/ld-elf/retain5lib.s: New test.
* testsuite/ld-elf/retain5main.s: New test.
* testsuite/ld-elf/retain6a.d: New test.
* testsuite/ld-elf/retain6b.d: New test.
* testsuite/ld-elf/retain6lib.s: New test.
* testsuite/ld-elf/retain6main.s: New test.
Symbol value is in bytes while fragS::fr_address is in octets. Fixes GAS
symver12 and symver13 tests on ELF targets with with OCTETS_PER_BYTE>1.
* config/obj-elf (elf_frob_symbol): Fix symbol value calculation
for versioned symbol aliases.
Signed-off-by: Christian Eggers <ceggers@gmx.de>
PR 26253
gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for
the "o" section flag. Interpret it as a section index. Allow an
index of zero.
* doc/as.texi: Document the new behaviour.
* NEWS: Mention the new feature. Tidy entries.
* testsuite/gas/elf/sh-link-zero.s: New test.
* testsuite/gas/elf/sh-link-zero.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/section21.l: Updated expected assembler
output.
bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an
sh_link value of zero when the SLF_LINK_ORDER flag is set.
(assign_section_numbers): Likewise.
* config/obj-elf (elf_pseudo_table): Add attach_to_group.
(obj_elf_attach_to_group): New function.
* doc/as.texi: Document the new directive.
* NEWS: Mention the new feature.
* testsuite/gas/elf/attach-1.s: New test.
* testsuite/gas/elf/attach-1.d: New test driver.
* testsuite/gas/elf/attach-2.s: New test.
* testsuite/gas/elf/attach-2.d: New test driver.
* testsuite/gas/elf/attach-err.s: New test.
* testsuite/gas/elf/attach-err.d: New test driver.
* testsuite/gas/elf/attach-err.err: New test error output.
* testsuite/gas/elf/elf.exp: Run the new tests.
This patch fixes an internal error in GAS when defining a section using
a symbol that has already been named but not defined. For a minimal
reproducer, try the following input:
a=b
.sect a
The problem is that obj_elf_change_section() happily reuses the symbol
"a" created by equals() without clearing the sy_value field: prior to
this patch, it just set bsym. This caused a problem when attempting to
resolve the section symbol, since resolve_symbol_value() ended up
resolving the symbol as if it were the original symbol created by
equals(), which ends up leaving the section symbol in the undefined
section instead of in section a, hence the call to abort() in
S_SET_SEGMENT().
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section): When repurposing an
existing symbol, ensure that we set sy_value as per other (fresh)
section symbols.
* testsuite/gas/elf/elf.exp: Add new test.
* testsuite/gas/elf/section-symbol-redef.d: New test.
* testsuite/gas/elf/section-symbol-redef.s: Input for test.
* config/obj-elf.c (elf_frob_symbol): Unconditionally remove
symbol for ".symver .. remove".
* doc/as.texi (.symver): Update.
* testsuite/gas/symver/symver11.s: Make foo weak.
* testsuite/gas/symver/symver11.d: Expect an error.
* testsuite/gas/symver/symver7.d: Allow other random symbols.
