* breakpoint.h (enum enable_state): Add bp_startup_disabled.

(disable_breakpoints_before_startup): Add prototype.
	(enable_breakpoints_after_startup): Likewise.

	* breakpoint.c (executing_startup): New static variable.
	(describe_other_breakpoints): Handle bp_startup_disabled.
	(check_duplicates_for): Likewise.
	(disable_breakpoints_before_startup): New function.
	(enable_breakpoints_after_startup): New function.
	(create_breakpoint): Mark new breakpoints as bp_startup_disabled
	if executing_startup flag is true.
	(break_command_really): Likewise.
	(breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.

gdb/ChangeLog

@@ -1,3 +1,19 @@
+2009-07-31  Ulrich Weigand  <uweigand@de.ibm.com>
+
+	* breakpoint.h (enum enable_state): Add bp_startup_disabled.
+	(disable_breakpoints_before_startup): Add prototype.
+	(enable_breakpoints_after_startup): Likewise.
+
+	* breakpoint.c (executing_startup): New static variable.
+	(describe_other_breakpoints): Handle bp_startup_disabled.
+	(check_duplicates_for): Likewise.
+	(disable_breakpoints_before_startup): New function.
+	(enable_breakpoints_after_startup): New function.
+	(create_breakpoint): Mark new breakpoints as bp_startup_disabled
+	if executing_startup flag is true.
+	(break_command_really): Likewise.
+	(breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
+
 2009-07-31  Julian Brown  <julian@codesourcery.com>
 
 	* arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):

gdb/breakpoint.c

@@ -319,6 +319,9 @@ static int executing_breakpoint_commands;
 /* Are overlay event breakpoints enabled? */
 static int overlay_events_enabled;
 
+/* Are we executing startup code?  */
+static int executing_startup;
+
 /* Walk the following statement or block through all breakpoints.
    ALL_BREAKPOINTS_SAFE does so even if the statment deletes the current
    breakpoint.  */
@@ -4140,7 +4143,8 @@ describe_other_breakpoints (struct gdbarch *gdbarch, CORE_ADDR pc,
 	      printf_filtered (" (thread %d)", b->thread);
 	    printf_filtered ("%s%s ",
 			     ((b->enable_state == bp_disabled
-			       || b->enable_state == bp_call_disabled) 
+			       || b->enable_state == bp_call_disabled
+			       || b->enable_state == bp_startup_disabled)
 			      ? " (disabled)"
 			      : b->enable_state == bp_permanent 
 			      ? " (permanent)"
@@ -4211,6 +4215,7 @@ check_duplicates_for (CORE_ADDR address, struct obj_section *section)
   ALL_BP_LOCATIONS (b)
     if (b->owner->enable_state != bp_disabled
 	&& b->owner->enable_state != bp_call_disabled
+	&& b->owner->enable_state != bp_startup_disabled
 	&& b->enabled
 	&& !b->shlib_disabled
 	&& b->address == address	/* address / overlay match */
@@ -4247,6 +4252,7 @@ check_duplicates_for (CORE_ADDR address, struct obj_section *section)
 	    if (b->owner->enable_state != bp_permanent
 		&& b->owner->enable_state != bp_disabled
 		&& b->owner->enable_state != bp_call_disabled
+		&& b->owner->enable_state != bp_startup_disabled
 		&& b->enabled && !b->shlib_disabled		
 		&& b->address == address	/* address / overlay match */
 		&& (!overlay_debugging || b->section == section)
@@ -5095,6 +5101,52 @@ enable_watchpoints_after_interactive_call_stop (void)
   }
 }
 
+void
+disable_breakpoints_before_startup (void)
+{
+  struct breakpoint *b;
+  int found = 0;
+
+  ALL_BREAKPOINTS (b)
+    {
+      if ((b->type == bp_breakpoint
+	   || b->type == bp_hardware_breakpoint)
+	  && breakpoint_enabled (b))
+	{
+	  b->enable_state = bp_startup_disabled;
+	  found = 1;
+	}
+    }
+
+  if (found)
+    update_global_location_list (0);
+
+  executing_startup = 1;
+}
+
+void
+enable_breakpoints_after_startup (void)
+{
+  struct breakpoint *b;
+  int found = 0;
+
+  executing_startup = 0;
+
+  ALL_BREAKPOINTS (b)
+    {
+      if ((b->type == bp_breakpoint
+	   || b->type == bp_hardware_breakpoint)
+	  && b->enable_state == bp_startup_disabled)
+	{
+	  b->enable_state = bp_enabled;
+	  found = 1;
+	}
+    }
+
+  if (found)
+    breakpoint_re_set ();
+}
+
 
 /* Set a breakpoint that will evaporate an end of command
    at address specified by SAL.
@@ -5438,6 +5490,11 @@ create_breakpoint (struct gdbarch *gdbarch,
 	  b->enable_state = enabled ? bp_enabled : bp_disabled;
 	  b->disposition = disposition;
 
+	  if (enabled && executing_startup
+	      && (b->type == bp_breakpoint
+		  || b->type == bp_hardware_breakpoint))
+	    b->enable_state = bp_startup_disabled;
+
 	  loc = b->loc;
 	}
       else
@@ -5993,6 +6050,11 @@ break_command_really (struct gdbarch *gdbarch,
       b->ops = ops;
       b->enable_state = enabled ? bp_enabled : bp_disabled;
 
+      if (enabled && executing_startup
+	  && (b->type == bp_breakpoint
+	      || b->type == bp_hardware_breakpoint))
+	b->enable_state = bp_startup_disabled;
+
       mention (b);
     }
   
@@ -7792,6 +7854,10 @@ breakpoint_re_set_one (void *bint)
     case bp_breakpoint:
     case bp_hardware_breakpoint:
     case bp_tracepoint:
+      /* Do not attempt to re-set breakpoints disabled during startup.  */
+      if (b->enable_state == bp_startup_disabled)
+	return 0;
+
       if (b->addr_string == NULL)
 	{
 	  /* Anything without a string can't be re-set. */

gdb/breakpoint.h

@@ -135,6 +135,12 @@ enum enable_state
 			   automatically enabled and reset when the call 
 			   "lands" (either completes, or stops at another 
 			   eventpoint). */
+    bp_startup_disabled,/* The eventpoint has been disabled during inferior
+			   startup.  This is necessary on some targets where
+			   the main executable will get relocated during
+			   startup, making breakpoint addresses invalid.
+			   The eventpoint will be automatically enabled and
+			   reset once inferior startup is complete.  */
     bp_permanent	/* There is a breakpoint instruction hard-wired into
 			   the target's code.  Don't try to write another
 			   breakpoint instruction on top of it, or restore
@@ -810,6 +816,19 @@ extern void disable_watchpoints_before_interactive_call_start (void);
 
 extern void enable_watchpoints_after_interactive_call_stop (void);
 
+/* These functions disable and re-enable all breakpoints during
+   inferior startup.  They are intended to be called from solib
+   code where necessary.  This is needed on platforms where the
+   main executable is relocated at some point during startup
+   processing, making breakpoint addresses invalid.
+
+   If additional breakpoints are created after the routine
+   disable_breakpoints_before_startup but before the routine
+   enable_breakpoints_after_startup was called, they will also
+   be marked as disabled.  */
+extern void disable_breakpoints_before_startup (void);
+extern void enable_breakpoints_after_startup (void);
+
 /* For script interpreters that need to define breakpoint commands
    after they've already read the commands into a struct command_line.  */
 extern enum command_control_type commands_from_control_command