2011-01-05 Michael Snyder <msnyder@vmware.com>
* addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
This commit is contained in:
Michael Snyder
parent
9689e3a3a7
commit
3e43a32aaa
151 changed files with 2974 additions and 1820 deletions
|
|
@ -388,7 +388,8 @@ hardwire_raw (struct serial *scb)
|
|||
struct hardwire_ttystate state;
|
||||
|
||||
if (get_tty_state (scb, &state))
|
||||
fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
|
||||
fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n",
|
||||
safe_strerror (errno));
|
||||
|
||||
#ifdef HAVE_TERMIOS
|
||||
state.termios.c_iflag = 0;
|
||||
|
|
@ -431,7 +432,8 @@ hardwire_raw (struct serial *scb)
|
|||
scb->current_timeout = 0;
|
||||
|
||||
if (set_tty_state (scb, &state))
|
||||
fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
|
||||
fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n",
|
||||
safe_strerror (errno));
|
||||
}
|
||||
|
||||
/* Wait for input on scb, with timeout seconds. Returns 0 on success,
|
||||
|
|
@ -497,7 +499,8 @@ wait_for (struct serial *scb, int timeout)
|
|||
struct hardwire_ttystate state;
|
||||
|
||||
if (get_tty_state (scb, &state))
|
||||
fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
|
||||
fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n",
|
||||
safe_strerror (errno));
|
||||
|
||||
#ifdef HAVE_TERMIOS
|
||||
if (timeout < 0)
|
||||
|
|
@ -549,17 +552,19 @@ wait_for (struct serial *scb, int timeout)
|
|||
#endif
|
||||
|
||||
if (set_tty_state (scb, &state))
|
||||
fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
|
||||
fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n",
|
||||
safe_strerror (errno));
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /* HAVE_TERMIO || HAVE_TERMIOS */
|
||||
}
|
||||
|
||||
/* Read a character with user-specified timeout. TIMEOUT is number of seconds
|
||||
to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
|
||||
char if successful. Returns SERIAL_TIMEOUT if timeout expired, EOF if line
|
||||
dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
|
||||
/* Read a character with user-specified timeout. TIMEOUT is number of
|
||||
seconds to wait, or -1 to wait forever. Use timeout of 0 to effect
|
||||
a poll. Returns char if successful. Returns SERIAL_TIMEOUT if
|
||||
timeout expired, EOF if line dropped dead, or SERIAL_ERROR for any
|
||||
other error (see errno in that case). */
|
||||
|
||||
/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
|
||||
ser_base*() until the old TERMIOS/SGTTY/... timer code has been
|
||||
|
|
@ -631,7 +636,7 @@ do_hardwire_readchar (struct serial *scb, int timeout)
|
|||
else if (errno == EINTR)
|
||||
continue;
|
||||
else
|
||||
return SERIAL_ERROR; /* Got an error from read */
|
||||
return SERIAL_ERROR; /* Got an error from read. */
|
||||
}
|
||||
|
||||
scb->bufcnt = status;
|
||||
|
|
@ -773,13 +778,14 @@ rate_to_code (int rate)
|
|||
{
|
||||
if (i)
|
||||
{
|
||||
warning (_("Invalid baud rate %d. Closest values are %d and %d."),
|
||||
rate, baudtab[i - 1].rate, baudtab[i].rate);
|
||||
warning (_("Invalid baud rate %d. "
|
||||
"Closest values are %d and %d."),
|
||||
rate, baudtab[i - 1].rate, baudtab[i].rate);
|
||||
}
|
||||
else
|
||||
{
|
||||
warning (_("Invalid baud rate %d. Minimum value is %d."),
|
||||
rate, baudtab[0].rate);
|
||||
rate, baudtab[0].rate);
|
||||
}
|
||||
return -1;
|
||||
}
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue