FreeChainXenon/binutils-gdb
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add the rest of the commands needed by GDB.

Browse source
This commit is contained in:
Rob Savoye 1995-02-06 21:43:21 +00:00
parent c2a543679d
commit 36439cd721
1 changed files with 21 additions and 31 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

52
gdb/array-rom.c
View file

@ -26,7 +26,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
extern int baud_rate;
void gdb_open();
void array_open();
void monitor_open();
/*
@ -36,28 +36,8 @@ void monitor_open();
* registers either. So, typing "info reg sp" becomes a "r30".
*/
static char *array_regnames[] = REGISTER_NAMES;
#if 0
static char *array_regnames[] = {
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
"sr", "lo", "hi", "bad", "cause","pc",
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",
"fsr", "fir", "fp",
"", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", ""
};
#endif
extern char *tmp_mips_processor_type;
extern int mips_set_processor_type();
/*
* Define the monitor command strings. Since these are passed directly
@ -70,7 +50,7 @@ struct target_ops array_ops = {
"Debug using the standard GDB remote protocol for the Array Tech target.",
"Debug using the standard GDB remote protocol for the Array Tech target.\n\
Specify the serial device it is connected to (e.g. /dev/ttya).",
gdb_open,
array_open,
monitor_close,
monitor_attach,
monitor_detach,
@ -112,11 +92,11 @@ Specify the serial device it is connected to (e.g. /dev/ttya).",
struct monitor_ops array_cmds = {
0, /* 1 for ASCII, 0 for binary */
"$?#b8+\n", /* monitor init string */
"go %x", /* execute or usually GO command */
"c", /* continue command */
"s", /* single step */
"brk %x", /* set a breakpoint */
"unbrk %x", /* clear a breakpoint */
"go %x\n", /* execute or usually GO command */
"c\n", /* continue command */
"s\n", /* single step */
"brk 0x%x\n", /* set a breakpoint */
"unbrk %x\n", /* clear a breakpoint */
0, /* 0 for number, 1 for address */
{
"M%8x,%4x:%8x", /* set memory */
@ -150,22 +130,32 @@ struct monitor_ops array_cmds = {
array_regnames /* registers names */
};
/*
* array_open -- open the Array Tech LSI33k based RAID disk controller.
*/
void
gdb_open(args, from_tty)
array_open(args, from_tty)
char *args;
int from_tty;
{
tmp_mips_processor_type = "lsi33k"; /* change the default from r3051 */
mips_set_processor_type_command ("lsi33k", 0);
baud_rate = 4800; /* this is the only supported baud rate */
target_preopen(from_tty);
push_target (&array_ops);
push_monitor (&array_cmds);
monitor_open (args, "array", from_tty);
}
/*
* _initialize_array -- do any special init stuff for the target.
*/
void
_initialize_array ()
{
add_target (&array_ops);
baud_rate = 4800;
}