* Makefile.in sh3-rom.c config/sh/sh.mt config/sh/tm-sh.h: Add

sh3 monitor support.
	* monitor.c:  Cleanup regexp compilation stuff to make it easier
	to use several regexps.
	* monitor.h:  Get rid of struct rom_cmd_data.  It's no longer used.
	* config/m68k/tm-monitor.h:  Don't redefine NUM_REGS here.  It just
	causes GDB to crash.

gdb/.Sanitize

@@ -299,6 +299,7 @@ ser-unix.c
 serial.c
 serial.h
 sh-tdep.c
+sh3-rom.c
 signals.h
 solib.c
 solib.h

gdb/ChangeLog

@@ -1,5 +1,13 @@
 Mon Oct 16 11:27:06 1995  Stu Grossman  (grossman@cygnus.com)
 
+	* Makefile.in sh3-rom.c config/sh/sh.mt config/sh/tm-sh.h:  Add
+	sh3 monitor support.
+	* monitor.c:  Cleanup regexp compilation stuff to make it easier
+	to use several regexps.
+	* monitor.h:  Get rid of struct rom_cmd_data.  It's no longer used.
+	* config/m68k/tm-monitor.h:  Don't redefine NUM_REGS here.  It just
+	causes GDB to crash.
+
 	* sparcl-tdep.c:  Cleanup serial error handling.
 
 Sun Oct 15 16:19:27 1995  Stan Shebs  <shebs@andros.cygnus.com>

gdb/Makefile.in

@@ -931,6 +931,7 @@ ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
 	tahoe-tdep.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
 	vax-tdep.c \
 	vx-share/xdr_ld.c vx-share/xdr_ptrace.c vx-share/xdr_rdb.c \
+	win32-nat.c \
 	xcoffread.c xcoffsolib.c z8k-tdep.c
 
 ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt config/a29k/vx29k.mt\
@@ -953,6 +954,7 @@ ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt config/a29k/vx29k.m
 	config/i386/ncr3000.mh config/i386/ncr3000.mt config/i386/ptx.mh \
 	config/i386/sun386.mh \
 	config/i386/sun386.mt config/i386/symmetry.mh config/i386/symmetry.mt \
+	config/i386/win32.mh config/i386/win32.mt \
 	config/i960/nindy960.mt config/i960/vxworks960.mt config/m68k/3b1.mh \
 	config/m68k/3b1.mt config/m68k/altos.mh config/m68k/altos.mt \
 	config/m68k/amix.mh config/m68k/amix.mt config/m68k/apollo68b.mh \
@@ -1414,6 +1416,9 @@ sh-tdep.o: sh-tdep.c $(bfd_h) $(dis-asm_h) \
 	$(srcdir)/../opcodes/sh-opc.h $(defs_h) $(expression_h) $(frame_h) \
 	$(gdbcmd_h) $(gdbtypes_h) $(symtab_h) $(value_h)
 
+sh3-rom.o: sh3-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h serial.h terminal.h
+
 solib.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
 	objfiles.h regex.h symfile.h target.h
 
@@ -1487,6 +1492,8 @@ vax-tdep.o: vax-tdep.c $(OP_INCLUDE)/vax.h $(defs_h) $(symtab_h)
 
 w65-tdep.o : w65-tdep.c
 
+win32-nat.o: win32-nat.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h)
+
 xdr_ld.o: vx-share/xdr_ld.c $(defs_h) vx-share/vxTypes.h \
 	vx-share/vxWorks.h vx-share/xdr_ld.h
 	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_ld.c

gdb/config/sh/sh.mt

@@ -1,5 +1,5 @@
 # Target: Hitachi Super-H with ICE and simulator
-TDEPFILES= sh-tdep.o remote-e7000.o ser-e7kpc.o
+TDEPFILES= sh-tdep.o monitor.o sh3-rom.o remote-e7000.o ser-e7kpc.o
 TM_FILE= tm-sh.h
 
 SIM_OBS = remote-sim.o

gdb/config/sh/tm-sh.h

@@ -117,6 +117,7 @@ extern CORE_ADDR sh_skip_prologue ();
    to be actual register numbers as far as the user is concerned
    but do serve to get the desired values when passed to read_register.  */
 
+#define R0_REGNUM	0
 #define FP_REGNUM 	14
 #define SP_REGNUM 	15
 #define PC_REGNUM 	16

gdb/monitor.h

@@ -24,12 +24,6 @@
 
 #include "serial.h"
 
-struct rom_cmd_data {
-  char *cmd;			/* command to send */
-  char *delim;			/* the delimiter */
-  char *result;			/* the result */
-};
-
 /* This structure describes the strings necessary to give small command
    sequences to the monitor, and parse the response.
 

gdb/sh3-rom.c

@@ -0,0 +1,201 @@
+/* Remote target glue for the Hitachi SH-3 ROM monitor.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void sh3_open PARAMS ((char *args, int from_tty));
+
+static void
+sh3_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int numregs;
+  int regno;
+
+  numregs = 1;
+  regno = -1;
+
+  if (regnamelen == 2)
+    switch (regname[0])
+      {
+      case 'S':
+	if (regname[1] == 'R')
+	  regno = SR_REGNUM;
+	break;
+      case 'P':
+	if (regname[1] == 'C')
+	  regno = PC_REGNUM;
+	else if (regname[1] == 'R')
+	  regno = PR_REGNUM;
+	break;
+      }
+  else if (regnamelen == 3)
+    switch (regname[0])
+      {
+      case 'G':
+      case 'V':
+	if (regname[1] == 'B' && regname[2] == 'R')
+	  if (regname[0] == 'G')
+	    regno = VBR_REGNUM;
+	  else
+	    regno = GBR_REGNUM;
+	break;
+#if 0
+      case 'S':
+	if (regname[1] == 'S' && regname[2] == 'R')
+	  regno = SSR_REGNUM;
+	else if (regname[1] == 'P' && regname[2] == 'C')
+	  regno = SPC_REGNUM;
+	break;
+#endif
+      }
+  else if (regnamelen == 4)
+    switch (regname[0])
+      {
+      case 'M':
+	if (regname[1] == 'A' && regname[2] == 'C')
+	  if (regname[3] == 'H')
+	    regno = MACH_REGNUM;
+	  else if (regname[3] == 'L')
+	    regno = MACL_REGNUM;
+	break;
+      case 'R':
+	if (regname[1] == '0' && regname[2] == '-' && regname[3] == '7')
+	  {
+	    regno = R0_REGNUM;
+	    numregs = 8;
+	  }
+      }
+  else if (regnamelen == 5)
+    if (regname[1] == '8' && regname[2] == '-' && regname[3] == '1'
+	&& regname[4] =='5')
+      {
+	regno = R0_REGNUM + 8;
+	numregs = 8;
+      }
+
+  if (regno >= 0)
+    while (numregs-- > 0)
+      val = monitor_supply_register (regno++, val);
+}
+
+/* This array of registers need to match the indexes used by GDB.
+   This exists because the various ROM monitors use different strings
+   than does GDB, and don't necessarily support all the registers
+   either. So, typing "info reg sp" becomes a "r30".  */
+
+static char *sh3_regnames[NUM_REGS] = {
+  "R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7",
+  "R8", "R9", "R10","R11","R12","R13","R14","R15",
+  "PC", "PR", "GBR","VBR","MACH","MACL","SR",NULL,
+  NULL,  NULL, NULL, NULL};
+
+/* Define the monitor command strings. Since these are passed directly
+   through to a printf style function, we may include formatting
+   strings. We also need a CR or LF on the end.  */
+
+static struct target_ops sh3_ops;
+
+static char *sh3_inits[] = {"\003", NULL}; /* Exits sub-command mode & download cmds */
+
+static struct monitor_ops sh3_cmds =
+{
+  0,				/* flags */
+  sh3_inits,			/* monitor init string */
+  "g\r",			/* continue command */
+  "s\r",			/* single step */
+  "\003",			/* Interrupt program */
+  "b %x\r",			/* set a breakpoint */
+  "b -%x\r",			/* clear a breakpoint */
+  "b -\r",			/* clear all breakpoints */
+  "f %x @%x %x\r",		/* fill (start len val) */
+  {
+    "m %x %x\r",		/* setmem.cmdb (addr, value) */
+    "m %x %x;w\r",		/* setmem.cmdw (addr, value) */
+    "m %x %x;l\r",		/* setmem.cmdl (addr, value) */
+    NULL,			/* setmem.cmdll (addr, value) */
+    NULL,			/* setreg.resp_delim */
+    NULL,			/* setreg.term */
+    NULL,			/* setreg.term_cmd */
+  },
+  {
+    "d %x@%x;b\r",		/* getmem.cmdb (addr, len) */
+    "d %x@%x;w\r",		/* getmem.cmdw (addr, len) */
+    "d %x@%x;l\r",		/* getmem.cmdl (addr, len) */
+    NULL,			/* getmem.cmdll (addr, len) */
+    "^[0-9A-F]+  ",		/* getmem.resp_delim */
+    NULL,			/* getmem.term */
+    NULL,			/* getmem.term_cmd */
+  },
+  {
+    ".%s %x\r",			/* setreg.cmd (name, value) */
+    NULL,			/* setreg.resp_delim */
+    NULL,			/* setreg.term */
+    NULL			/* setreg.term_cmd */
+  },
+  {
+    ".%s\r",			/* getreg.cmd (name) */
+    "=",			/* getreg.resp_delim */
+    "? ",			/* getreg.term */
+    ".\r"			/* getreg.term_cmd */
+  },
+  "r\r",			/* dump_registers */
+				/* register_pattern */
+  "\\(\\w+\\)=\\([0-9a-fA-F]+\\( +[0-9a-fA-F]+\\b\\)*\\)",
+  sh3_supply_register,		/* supply_register */
+  NULL,				/* load_routine (defaults to SRECs) */
+  "l\r",			/* download command */
+  NULL,				/* Load response */
+  "\n:",			/* monitor command prompt */
+  "\r",				/* end-of-line terminator */
+  ".\r",			/* optional command terminator */
+  &sh3_ops,			/* target operations */
+  SERIAL_1_STOPBITS,		/* number of stop bits */
+  sh3_regnames,			/* registers names */
+  MONITOR_OPS_MAGIC		/* magic */
+};
+
+static void
+sh3_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &sh3_cmds, from_tty);
+}
+
+void
+_initialize_sh3 ()
+{
+  init_monitor_ops (&sh3_ops);
+
+  sh3_ops.to_shortname = "sh3";
+  sh3_ops.to_longname = "Hitachi SH-3 rom monitor";
+  sh3_ops.to_doc = "Debug on a Hitachi eval board running the SH-3 rom monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  sh3_ops.to_open = sh3_open;
+
+  add_target (&sh3_ops);
+}