FreeChainXenon/binutils-gdb
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
binutils-gdb/sim/Makefile.in

2846 lines
140 KiB
Makefile
Raw Normal View History

sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
sim: Fix use of out-of-tree assembler and linker when testing With commit 7a259895bb2d "sim: testsuite: expand arch specific toolchain settings", trying to use out-of-tree ld and as at test-time broke for the "primary target", like when testing a release-tarball. Subsequent to that commit, all assembler tests without in-tree-built tools FAIL, getting errors when trying to call $(abs_builddir)/../gas/as-new. But, that isn't the actual culprint; it's actually it's its immediate predecessor, commit 8996c21067373 "sim: testsuite: setup per-port toolchain settings for multitarget build", which hardcodes in-tree-paths to those tools instead of considering e.g. $(<X>_FOR_TARGET), the preferred overridable variable for single-target builds, as set up by the toplevel Makefile. This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific features aren't used) from toplev/config/acx.m4, somewhat like calls in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS step, for each X to find a value for $(<X>_FOR_TARGET). N.B.: in-tree tools still override any ${target}-${tool} found in $PATH, i.e. only previously broken builds are affected. The variables $(<X>_FOR_TARGET) are usually overridden by the toplevel Makefile to the same value or better, but has to be set here too, as automake "wants" Makefiles to be self-contained (you get an error pointing out that the variable may be empty). If it hadn't been for that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed. This detail should only (positively) affect users invoking "make check" in sim/ instead of "make check-sim" (or "make check") at the toplevel. Now the output from "configure" matches the target tools actually used by sim at test-time, for the "primary target". Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as that appears to be a deliberate special-case. Note that all tools still have to be installed and present in $PATH at configure-time to be properly used at test-time. sim: * m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET): New defun. (SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded values. * Makefile.in, configure: Regenerate.
2022-02-14 23:51:07 +01:00
# Copyright (C) 1994-2017 Free Software Foundation, Inc.
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
sim: Fix use of out-of-tree assembler and linker when testing With commit 7a259895bb2d "sim: testsuite: expand arch specific toolchain settings", trying to use out-of-tree ld and as at test-time broke for the "primary target", like when testing a release-tarball. Subsequent to that commit, all assembler tests without in-tree-built tools FAIL, getting errors when trying to call $(abs_builddir)/../gas/as-new. But, that isn't the actual culprint; it's actually it's its immediate predecessor, commit 8996c21067373 "sim: testsuite: setup per-port toolchain settings for multitarget build", which hardcodes in-tree-paths to those tools instead of considering e.g. $(<X>_FOR_TARGET), the preferred overridable variable for single-target builds, as set up by the toplevel Makefile. This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific features aren't used) from toplev/config/acx.m4, somewhat like calls in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS step, for each X to find a value for $(<X>_FOR_TARGET). N.B.: in-tree tools still override any ${target}-${tool} found in $PATH, i.e. only previously broken builds are affected. The variables $(<X>_FOR_TARGET) are usually overridden by the toplevel Makefile to the same value or better, but has to be set here too, as automake "wants" Makefiles to be self-contained (you get an error pointing out that the variable may be empty). If it hadn't been for that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed. This detail should only (positively) affect users invoking "make check" in sim/ instead of "make check-sim" (or "make check") at the toplevel. Now the output from "configure" matches the target tools actually used by sim at test-time, for the "primary target". Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as that appears to be a deliberate special-case. Note that all tools still have to be installed and present in $PATH at configure-time to be properly used at test-time. sim: * m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET): New defun. (SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded values. * Makefile.in, configure: Regenerate.
2022-02-14 23:51:07 +01:00
# Copyright (C) 1993-2022 Free Software Foundation, Inc.
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
#
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
Switch the license of all files explicitly copyright the FSF to GPLv3.
2007-08-24 14:30:15 +00:00
# the Free Software Foundation; either version 3 of the License, or
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
# (at your option) any later version.
Switch the license of all files explicitly copyright the FSF to GPLv3.
2007-08-24 14:30:15 +00:00
#
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
Switch the license of all files explicitly copyright the FSF to GPLv3.
2007-08-24 14:30:15 +00:00
#
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
# You should have received a copy of the GNU General Public License
Switch the license of all files explicitly copyright the FSF to GPLv3.
2007-08-24 14:30:15 +00:00
# along with this program. If not, see <http://www.gnu.org/licenses/>.
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
sim: install library header files We install libsim.a for people to link against, but haven't been installing the header files to for its API. Export them!
2021-05-14 01:57:06 -04:00
sim: install various doc files
2021-11-18 19:32:31 -05:00
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
VPATH = @srcdir@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
check_PROGRAMS = $(am__EXEEXT_8)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
EXTRA_PROGRAMS = $(am__EXEEXT_2) testsuite/common/bits-gen$(EXEEXT) \
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
testsuite/common/fpu-tst$(EXEEXT) $(am__EXEEXT_3) \
$(am__EXEEXT_4) $(am__EXEEXT_5) $(am__EXEEXT_6) \
$(am__EXEEXT_7)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@ENABLE_SIM_TRUE@am__append_1 = \
@ENABLE_SIM_TRUE@ $(srcroot)/include/sim/callback.h \
@ENABLE_SIM_TRUE@ $(srcroot)/include/sim/sim.h
@SIM_ENABLE_IGEN_TRUE@am__append_2 = $(IGEN)
@SIM_ENABLE_IGEN_TRUE@am__append_3 = igen/libigen.a
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
@SIM_ENABLE_IGEN_TRUE@am__append_4 = $(igen_IGEN_TOOLS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_IGEN_TRUE@am__append_5 = $(igen_IGEN_TOOLS)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
TESTS = testsuite/common/bits32m0$(EXEEXT) \
testsuite/common/bits32m31$(EXEEXT) \
testsuite/common/bits64m0$(EXEEXT) \
testsuite/common/bits64m63$(EXEEXT) \
testsuite/common/alu-tst$(EXEEXT)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_bpf_TRUE@am__append_6 = $(bpf_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_bpf_TRUE@am__append_7 = $(bpf_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_cr16_TRUE@am__append_8 = $(cr16_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_cr16_TRUE@am__append_9 = cr16/gencode
@SIM_ENABLE_ARCH_cr16_TRUE@am__append_10 = $(cr16_BUILD_OUTPUTS)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_cris_TRUE@am__append_11 = $(cris_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_cris_TRUE@am__append_12 = $(cris_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_d10v_TRUE@am__append_13 = $(d10v_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_d10v_TRUE@am__append_14 = d10v/gencode
@SIM_ENABLE_ARCH_d10v_TRUE@am__append_15 = $(d10v_BUILD_OUTPUTS)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_frv_TRUE@am__append_16 = $(frv_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_frv_TRUE@am__append_17 = $(frv_BUILD_OUTPUTS)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_iq2000_TRUE@am__append_18 = $(iq2000_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_iq2000_TRUE@am__append_19 = $(iq2000_BUILD_OUTPUTS)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_lm32_TRUE@am__append_20 = $(lm32_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_lm32_TRUE@am__append_21 = $(lm32_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_m32c_TRUE@am__append_22 = $(m32c_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_m32c_TRUE@am__append_23 = m32c/opc2c
@SIM_ENABLE_ARCH_m32c_TRUE@am__append_24 = \
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_m32c_TRUE@ $(m32c_BUILD_OUTPUTS) \
@SIM_ENABLE_ARCH_m32c_TRUE@ m32c/m32c.c.log \
@SIM_ENABLE_ARCH_m32c_TRUE@ m32c/r8c.c.log
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_m32r_TRUE@am__append_25 = $(m32r_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_m32r_TRUE@am__append_26 = $(m32r_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_m68hc11_TRUE@am__append_27 = $(m68hc11_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_m68hc11_TRUE@am__append_28 = m68hc11/gencode
@SIM_ENABLE_ARCH_m68hc11_TRUE@am__append_29 = $(m68hc11_BUILD_OUTPUTS)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_mn10300_TRUE@am__append_30 = $(mn10300_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_mn10300_TRUE@am__append_31 = $(mn10300_BUILD_OUTPUTS)
sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled).
2022-10-09 03:57:12 +00:00
@SIM_ENABLE_ARCH_moxie_TRUE@am__append_32 = moxie/$(am__dirstamp)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_or1k_TRUE@am__append_33 = $(or1k_BUILD_OUTPUTS)
sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled).
2022-10-09 03:57:12 +00:00
@SIM_ENABLE_ARCH_or1k_TRUE@am__append_34 = $(or1k_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_sh_TRUE@am__append_35 = $(sh_BUILD_OUTPUTS)
@SIM_ENABLE_ARCH_sh_TRUE@am__append_36 = sh/gencode
@SIM_ENABLE_ARCH_sh_TRUE@am__append_37 = $(sh_BUILD_OUTPUTS)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
@SIM_ENABLE_ARCH_v850_TRUE@am__append_38 = $(v850_BUILD_OUTPUTS)
sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled).
2022-10-09 03:57:12 +00:00
@SIM_ENABLE_ARCH_v850_TRUE@am__append_39 = $(v850_BUILD_OUTPUTS)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
sim: unify bug & package settings Move these options up to the common dir so we only test & export them once across all ports. The AC_INIT macro does a lot of the heavy lifting already which allows further simplification.
2021-06-06 20:48:46 -04:00
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
$(top_srcdir)/../config/gettext-sister.m4 \
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
$(top_srcdir)/../config/lead-dot.m4 \
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
$(top_srcdir)/../config/override.m4 \
sim: bfin: move pkg-config & SDL checks to common code This reduces the unique logic in bfin/configure to make it easier to (eventually) unify it entirely.
2021-06-26 10:43:27 -04:00
$(top_srcdir)/../config/pkg.m4 \
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
$(top_srcdir)/../config/plugins.m4 \
sim: Link ZSTD_LIBS This fixes linker errors in a `../../configure --enable-targets --enable-sim; make all-gdb` build.
2022-09-27 11:42:32 -07:00
$(top_srcdir)/../config/zlib.m4 \
$(top_srcdir)/../config/zstd.m4 $(top_srcdir)/../libtool.m4 \
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
sim: overhaul alignment settings management Currently, the sim-config module will abort if alignment settings haven't been specified by the port's configure.ac. This is a bit weird when we've allowed SIM_AC_OPTION_ALIGNMENT to seem like it's optional to use. Thus everyone invokes it. There are 4 alignment settings, but really only 2 matters: strict and nonstrict. The "mixed" setting is just the default ("unset"), and "forced" isn't used directly by anyone (it's available as a runtime option for some ports). The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, then the build won't work (see above as if SIM_AC_OPTION_ALIGNMENT wasn't called). If default settings are provided, then that is used, but we allow the user to override at runtime. Otherwise, the "wire" settings are used and user runtime options to change are ignored. Most ports specify a default, or set the "wire" to nonstrict. A few set "wire" to strict, but it's not clear that's necessary as it doesn't make the code behavior, by default, any different. It might make things a little faster, but we should provide the user the choice of the compromises to make: force a specific mode at compile time for faster runtime, or allow the choice at runtime. More likely it seems like an oversight when these ports were initially created, and/or copied & pasted from existing ports. With all that backstory, let's get to what this commit does. First kill off the idea of a compile-time default alignment and set it to nonstrict in the common code. For any ports that want strict alignment by default, that code is moved to sim_open while initializing the sim. That means WITH_DEFAULT_ALIGNMENT can be completely removed. Moving the default alignment to the runtime also allows removal of setting the "wire" settings at configure time. Which allows removing of all arguments to SIM_AC_OPTION_ALIGNMENT and moving that call to common code. The macro logic can be reworked to not pass WITH_ALIGNMENT as -D CPPFLAG and instead move it to config.h. All of these taken together mean we can hoist the macro up to the top level and share it among all sims so behavior is consistent among all the ports.
2021-06-07 00:54:20 -04:00
$(top_srcdir)/m4/sim_ac_option_alignment.m4 \
sim: unify assert build settings Move the --sim-enable-assert option up to the common dir so we only test & export it once across all ports.
2021-06-06 18:45:05 -04:00
$(top_srcdir)/m4/sim_ac_option_assert.m4 \
sim: unify cgen maintainer settings Move these options up to the common dir so we only test & export them once across all ports. It makes it available to targets that aren't cgen-based, but those will just ignore the settings, so it shouldn't be an issue.
2021-06-19 10:42:37 -04:00
$(top_srcdir)/m4/sim_ac_option_cgen_maint.m4 \
sim: unify debug/stdio/trace/profile build settings Move these options up to the common dir so we only test & export them once across all ports. The ppc code needs a little extra care with its trace settings as it's not exactly the same API as the common code. The other knobs are the same though.
2021-06-06 20:35:02 -04:00
$(top_srcdir)/m4/sim_ac_option_debug.m4 \
sim: overhaul & unify endian settings management The m4 macro has 2 args: the "wire" settings (which represents the hardwired port behavior), and the default settings (which are used if nothing else is specified). If none are specified, the arch is expected to support both, and the value will be probed based on the user runtime options or the input program. Only two arches today set the default value (bpf & mips). We can probably let this go as it only shows up in one scenario: the sim is invoked, but with no inputs, and no user endian selection. This means bpf will not behave like the other arches: an error is shown and forces the user to make a choice. If an input program is used though, we'll still switch the default to that. This allows us to remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting. For the ports that set a "wire" endian, move it to the runtime init of the respective sim_open calls. This allows us to change the WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting if they want to force a specific endianness. With all the endian logic moved to runtime selection, we can move the configure call up to the common dir so we only process it once across all ports. The ppc arch was picking the wire endian based on the target used, but since we weren't doing that for other biendian arches, we can let this go too. We'll rely on the input selecting the endian, or make the user decide.
2021-06-15 19:51:52 -04:00
$(top_srcdir)/m4/sim_ac_option_endian.m4 \
sim: unify environment build settings Move the --sim-enable-environment option up to the common dir so we only test & export it once across all ports.
2021-06-06 20:11:02 -04:00
$(top_srcdir)/m4/sim_ac_option_environment.m4 \
sim: unify hardware settings Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 20:06:12 -04:00
$(top_srcdir)/m4/sim_ac_option_hardware.m4 \
sim: move sim-inline to the common code This will allow us to build the common code with the same inline settings as the arch subdirs, and only do the test once.
2021-06-15 22:45:07 -04:00
$(top_srcdir)/m4/sim_ac_option_inline.m4 \
sim: unify debug/stdio/trace/profile build settings Move these options up to the common dir so we only test & export them once across all ports. The ppc code needs a little extra care with its trace settings as it's not exactly the same API as the common code. The other knobs are the same though.
2021-06-06 20:35:02 -04:00
$(top_srcdir)/m4/sim_ac_option_profile.m4 \
sim: unify reserved instruction bits settings Move these options up to the common dir so we only test & export them once across all ports. The setting only affects igen based ports, and they were turning this on by default, so keep the default in place.
2021-07-01 01:04:48 -04:00
$(top_srcdir)/m4/sim_ac_option_reserved_bits.m4 \
sim: unify scache settings The cgen scache module is enabled by every cgen port, and with the same default value of 16k (which matches the common default value). Let's pull this option out of the individual ports (via CPPFLAGS) and into the common code (via config.h). The object itself is compiled only for cgen ports atm, so that part doesn't change. The scache code is initialized dynamically via the modules.c logic. That's why the profile code needs an additional CGEN_ARCH check. This will allow us to collapse arch configure files more. Merging the source files will require more future work, but integrating the cgen & non-cgen worlds itself will take a lot.
2021-06-28 22:39:16 -04:00
$(top_srcdir)/m4/sim_ac_option_scache.m4 \
sim: unify debug/stdio/trace/profile build settings Move these options up to the common dir so we only test & export them once across all ports. The ppc code needs a little extra care with its trace settings as it's not exactly the same API as the common code. The other knobs are the same though.
2021-06-06 20:35:02 -04:00
$(top_srcdir)/m4/sim_ac_option_stdio.m4 \
$(top_srcdir)/m4/sim_ac_option_trace.m4 \
sim: unify -Werror build settings Move these options up to the common dir so we only test & export them once across all ports. It also enables -Werror usage on the common files we've been pulling out of arch subdirs.
2021-06-18 01:14:39 -04:00
$(top_srcdir)/m4/sim_ac_option_warnings.m4 \
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
$(top_srcdir)/m4/sim_ac_platform.m4 \
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
$(top_srcdir)/m4/sim_ac_toolchain.m4 \
sim: cris/frv/iq2000/lm32: merge with common configure script Now that the scache logic has been migrated into the common code, there's nothing specific in these configure scripts, so merge them into the common one. The frv unique logic can be moved to a dedicated include and merged in the common configure since the flag has been scoped to the arch.
2021-06-30 13:01:17 -04:00
$(top_srcdir)/frv/acinclude.m4 $(top_srcdir)/rx/acinclude.m4 \
$(top_srcdir)/configure.ac
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
$(am__configure_deps) $(am__pkginclude_HEADERS_DIST)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
CONFIG_HEADER = config.h
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
CONFIG_CLEAN_FILES = Make-common.sim aarch64/.gdbinit \
aarch64/Makefile.sim arm/.gdbinit arm/Makefile.sim \
avr/.gdbinit avr/Makefile.sim bfin/.gdbinit bfin/Makefile.sim \
cr16/.gdbinit cr16/Makefile.sim cris/.gdbinit \
cris/Makefile.sim d10v/.gdbinit d10v/Makefile.sim frv/.gdbinit \
frv/Makefile.sim ft32/.gdbinit ft32/Makefile.sim \
h8300/.gdbinit h8300/Makefile.sim iq2000/.gdbinit \
iq2000/Makefile.sim lm32/.gdbinit lm32/Makefile.sim \
m32c/.gdbinit m32c/Makefile.sim m32r/.gdbinit \
m32r/Makefile.sim m68hc11/.gdbinit m68hc11/Makefile.sim \
mcore/.gdbinit mcore/Makefile.sim microblaze/.gdbinit \
microblaze/Makefile.sim moxie/.gdbinit moxie/Makefile.sim \
msp430/.gdbinit msp430/Makefile.sim pru/.gdbinit \
pru/Makefile.sim rl78/.gdbinit rl78/Makefile.sim rx/.gdbinit \
rx/Makefile.sim sh/.gdbinit sh/Makefile.sim erc32/.gdbinit \
erc32/Makefile.sim example-synacor/.gdbinit \
sim: gdbinit: hoist setup to common code This was left in subdirs because of the dynamic cgen usage. However, we can move this breakpoint call to runtime and let gdb detect whether the symbol exists.
2022-02-17 00:35:31 -05:00
example-synacor/Makefile.sim arch-subdir.mk .gdbinit
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
CONFIG_CLEAN_VPATH_FILES =
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
AM_V_AR = $(am__v_AR_@AM_V@)
am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
am__v_AR_0 = @echo " AR " $@;
am__v_AR_1 =
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
common_libcommon_a_AR = $(AR) $(ARFLAGS)
common_libcommon_a_LIBADD =
am__dirstamp = $(am__leading_dot)dirstamp
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
am_common_libcommon_a_OBJECTS = \
sim: unify callback.o building Now that the use of TARGET_xxx defines have been removed, we can move this to the common logic so we only build it once for multi-targets.
2021-07-06 23:44:38 -04:00
common/common_libcommon_a-callback.$(OBJEXT) \
sim: start unifying portability shims There are some functions that gnulib does not yet provide fallbacks for, so start a common file of our own for holding existing stubs.
2021-05-29 16:07:43 -04:00
common/common_libcommon_a-portability.$(OBJEXT) \
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common/common_libcommon_a-sim-load.$(OBJEXT) \
sim: unify syscall.o building Now that we've unified all the syscall tables, this file does not rely on any port-specific settings, so move it up to building as part of the common step so we only do it once in a multibuild.
2021-11-28 13:23:02 -05:00
common/common_libcommon_a-syscall.$(OBJEXT) \
sim: nltvals: pull target errno out into a dedicated source file The current system maintains a list of target errno constants in the nltvals.def file, then runs a build-time tool to turn that into a C file. This list of errno values is the same for all arches, so we don't need the arch-specific flexibility. Further, these are only for newlib/libgloss environments, which makes it confusing to support other userland runtimes (like Linux). Let's simplify to make this easier to understand & build. We don't namespace the variables yet, but sets up the framework for it. Create a new target-newlib-errno.c template file. The template file is hand written, but the inline map is still automatically generated. This allows us to move it to the common set of objects so it's only built once in a multi-target build. Now we can remove the output from the gentmap build-time tool since it's checked into the tree. Then we stop including the errno lists in nltvals.def since nothing uses it.
2021-07-06 22:10:53 -04:00
common/common_libcommon_a-target-newlib-errno.$(OBJEXT) \
sim: nltvals: pull target open flags out into a dedicated source file Like we just did for pulling out the errno & signal maps, pull out the open flag map into a dedicated common file. All newlib ports are using the same map which makes it easy.
2021-07-06 23:37:56 -04:00
common/common_libcommon_a-target-newlib-open.$(OBJEXT) \
sim: nltvals: pull target signal out into a dedicated source file Like we just did for pulling out the errno map, pull out the signal map into a dedicated common file. All newlib ports are using the same signal map which makes it easy.
2021-07-06 22:43:10 -04:00
common/common_libcommon_a-target-newlib-signal.$(OBJEXT) \
sim: nltvals: pull target syscalls out into a dedicated source file Like we just did for pulling out the errno map, pull out the syscall maps into a dedicated common file. Most newlib ports are using the same syscall map, but not all, which means we have to do a bit more work to migrate. This commit adds the maps and switches the ports using the common default syscall table over to it. Ports using unique syscall tables are still using the old targ-map.c logic. Switching common ports over is easy by checking NL_TARGET, but the ppc code needs a bit more cleanup here hence its larger diff.
2021-11-01 01:31:44 -04:00
common/common_libcommon_a-target-newlib-syscall.$(OBJEXT) \
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common/common_libcommon_a-version.$(OBJEXT)
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
common_libcommon_a_OBJECTS = $(am_common_libcommon_a_OBJECTS)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
igen_libigen_a_AR = $(AR) $(ARFLAGS)
igen_libigen_a_LIBADD =
@SIM_ENABLE_IGEN_TRUE@am_igen_libigen_a_OBJECTS = \
@SIM_ENABLE_IGEN_TRUE@ igen/table.$(OBJEXT) igen/lf.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/misc.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/filter_host.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/filter.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-model.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-itable.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-icache.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-semantics.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-idecode.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-support.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-engine.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen.$(OBJEXT)
igen_libigen_a_OBJECTS = $(am_igen_libigen_a_OBJECTS)
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
@SIM_ENABLE_IGEN_TRUE@am__EXEEXT_1 = $(IGEN) igen/filter$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen$(EXEEXT) igen/ld-cache$(EXEEXT) \
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/table$(EXEEXT)
@SIM_ENABLE_IGEN_TRUE@am__EXEEXT_2 = $(am__EXEEXT_1)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_cr16_TRUE@am__EXEEXT_3 = cr16/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_d10v_TRUE@am__EXEEXT_4 = d10v/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_m32c_TRUE@am__EXEEXT_5 = m32c/opc2c$(EXEEXT)
@SIM_ENABLE_ARCH_m68hc11_TRUE@am__EXEEXT_6 = m68hc11/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_sh_TRUE@am__EXEEXT_7 = sh/gencode$(EXEEXT)
am__EXEEXT_8 = testsuite/common/bits32m0$(EXEEXT) \
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite/common/bits32m31$(EXEEXT) \
testsuite/common/bits64m0$(EXEEXT) \
testsuite/common/bits64m63$(EXEEXT) \
testsuite/common/alu-tst$(EXEEXT)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_cr16_TRUE@am_cr16_gencode_OBJECTS = \
@SIM_ENABLE_ARCH_cr16_TRUE@ cr16/gencode.$(OBJEXT)
cr16_gencode_OBJECTS = $(am_cr16_gencode_OBJECTS)
@SIM_ENABLE_ARCH_cr16_TRUE@cr16_gencode_DEPENDENCIES = \
@SIM_ENABLE_ARCH_cr16_TRUE@ cr16/cr16-opc.o
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_d10v_TRUE@am_d10v_gencode_OBJECTS = \
@SIM_ENABLE_ARCH_d10v_TRUE@ d10v/gencode.$(OBJEXT)
d10v_gencode_OBJECTS = $(am_d10v_gencode_OBJECTS)
@SIM_ENABLE_ARCH_d10v_TRUE@d10v_gencode_DEPENDENCIES = \
@SIM_ENABLE_ARCH_d10v_TRUE@ d10v/d10v-opc.o
am_igen_filter_OBJECTS =
igen_filter_OBJECTS = $(am_igen_filter_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_filter_DEPENDENCIES = igen/filter-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
am_igen_gen_OBJECTS =
igen_gen_OBJECTS = $(am_igen_gen_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_gen_DEPENDENCIES = igen/gen-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@am_igen_igen_OBJECTS = igen/igen.$(OBJEXT)
igen_igen_OBJECTS = $(am_igen_igen_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_igen_DEPENDENCIES = igen/libigen.a
am_igen_ld_cache_OBJECTS =
igen_ld_cache_OBJECTS = $(am_igen_ld_cache_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_DEPENDENCIES = \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache-main.o igen/libigen.a
am_igen_ld_decode_OBJECTS =
igen_ld_decode_OBJECTS = $(am_igen_ld_decode_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_DEPENDENCIES = \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode-main.o igen/libigen.a
am_igen_ld_insn_OBJECTS =
igen_ld_insn_OBJECTS = $(am_igen_ld_insn_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_DEPENDENCIES = igen/ld-insn-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
am_igen_table_OBJECTS =
igen_table_OBJECTS = $(am_igen_table_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_table_DEPENDENCIES = igen/table-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_m32c_TRUE@am_m32c_opc2c_OBJECTS = \
@SIM_ENABLE_ARCH_m32c_TRUE@ m32c/opc2c.$(OBJEXT)
m32c_opc2c_OBJECTS = $(am_m32c_opc2c_OBJECTS)
m32c_opc2c_LDADD = $(LDADD)
@SIM_ENABLE_ARCH_m68hc11_TRUE@am_m68hc11_gencode_OBJECTS = \
@SIM_ENABLE_ARCH_m68hc11_TRUE@ m68hc11/gencode.$(OBJEXT)
m68hc11_gencode_OBJECTS = $(am_m68hc11_gencode_OBJECTS)
m68hc11_gencode_LDADD = $(LDADD)
@SIM_ENABLE_ARCH_sh_TRUE@am_sh_gencode_OBJECTS = sh/gencode.$(OBJEXT)
sh_gencode_OBJECTS = $(am_sh_gencode_OBJECTS)
sh_gencode_LDADD = $(LDADD)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite_common_alu_tst_SOURCES = testsuite/common/alu-tst.c
testsuite_common_alu_tst_OBJECTS = testsuite/common/alu-tst.$(OBJEXT)
testsuite_common_alu_tst_LDADD = $(LDADD)
testsuite_common_bits_gen_SOURCES = testsuite/common/bits-gen.c
testsuite_common_bits_gen_OBJECTS = \
testsuite/common/bits-gen.$(OBJEXT)
testsuite_common_bits_gen_LDADD = $(LDADD)
testsuite_common_bits32m0_SOURCES = testsuite/common/bits32m0.c
testsuite_common_bits32m0_OBJECTS = \
testsuite/common/bits32m0.$(OBJEXT)
testsuite_common_bits32m0_LDADD = $(LDADD)
testsuite_common_bits32m31_SOURCES = testsuite/common/bits32m31.c
testsuite_common_bits32m31_OBJECTS = \
testsuite/common/bits32m31.$(OBJEXT)
testsuite_common_bits32m31_LDADD = $(LDADD)
testsuite_common_bits64m0_SOURCES = testsuite/common/bits64m0.c
testsuite_common_bits64m0_OBJECTS = \
testsuite/common/bits64m0.$(OBJEXT)
testsuite_common_bits64m0_LDADD = $(LDADD)
testsuite_common_bits64m63_SOURCES = testsuite/common/bits64m63.c
testsuite_common_bits64m63_OBJECTS = \
testsuite/common/bits64m63.$(OBJEXT)
testsuite_common_bits64m63_LDADD = $(LDADD)
testsuite_common_fpu_tst_SOURCES = testsuite/common/fpu-tst.c
testsuite_common_fpu_tst_OBJECTS = testsuite/common/fpu-tst.$(OBJEXT)
testsuite_common_fpu_tst_LDADD = $(LDADD)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
SOURCES = $(common_libcommon_a_SOURCES) $(igen_libigen_a_SOURCES) \
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
$(cr16_gencode_SOURCES) $(d10v_gencode_SOURCES) \
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
$(igen_filter_SOURCES) $(igen_gen_SOURCES) \
$(igen_igen_SOURCES) $(igen_ld_cache_SOURCES) \
$(igen_ld_decode_SOURCES) $(igen_ld_insn_SOURCES) \
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
$(igen_table_SOURCES) $(m32c_opc2c_SOURCES) \
$(m68hc11_gencode_SOURCES) $(sh_gencode_SOURCES) \
testsuite/common/alu-tst.c testsuite/common/bits-gen.c \
testsuite/common/bits32m0.c testsuite/common/bits32m31.c \
testsuite/common/bits64m0.c testsuite/common/bits64m63.c \
testsuite/common/fpu-tst.c
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
sim: install library header files We install libsim.a for people to link against, but haven't been installing the header files to for its API. Export them!
2021-05-14 01:57:06 -04:00
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
am__installdirs = "$(DESTDIR)$(armdocdir)" "$(DESTDIR)$(dtbdir)" \
"$(DESTDIR)$(erc32docdir)" "$(DESTDIR)$(frvdocdir)" \
"$(DESTDIR)$(or1kdocdir)" "$(DESTDIR)$(ppcdocdir)" \
"$(DESTDIR)$(rxdocdir)" "$(DESTDIR)$(pkgincludedir)"
DATA = $(armdoc_DATA) $(dtb_DATA) $(erc32doc_DATA) $(frvdoc_DATA) \
$(or1kdoc_DATA) $(ppcdoc_DATA) $(rxdoc_DATA)
sim: install various doc files
2021-11-18 19:32:31 -05:00
am__pkginclude_HEADERS_DIST = $(srcroot)/include/sim/callback.h \
$(srcroot)/include/sim/sim.h
sim: install library header files We install libsim.a for people to link against, but haven't been installing the header files to for its API. Export them!
2021-05-14 01:57:06 -04:00
HEADERS = $(pkginclude_HEADERS)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
cscope check recheck
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
DEJATOOL = $(PACKAGE)
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
EXPECT = expect
RUNTEST = runtest
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
am__tty_colors_dummy = \
mgn= red= grn= lgn= blu= brg= std=; \
am__color_tests=no
am__tty_colors = { \
$(am__tty_colors_dummy); \
if test "X$(AM_COLOR_TESTS)" = Xno; then \
am__color_tests=no; \
elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
am__color_tests=yes; \
elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
am__color_tests=yes; \
fi; \
if test $$am__color_tests = yes; then \
red=''; \
grn=''; \
lgn=''; \
blu=''; \
mgn=''; \
brg=''; \
std=''; \
fi; \
}
am__recheck_rx = ^[ ]*:recheck:[ ]*
am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
recheck = 1; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
{ \
if ((getline line2 < ($$0 ".log")) < 0) \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
{ \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
{ \
break; \
} \
}; \
if (recheck) \
print $$0; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
print "fatal: making $@: " msg | "cat >&2"; \
exit 1; \
} \
function rst_section(header) \
{ \
print header; \
len = length(header); \
for (i = 1; i <= len; i = i + 1) \
printf "="; \
printf "\n\n"; \
} \
{ \
copy_in_global_log = 1; \
global_test_result = "RUN"; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".trs"); \
if (line ~ /$(am__global_test_result_rx)/) \
{ \
sub("$(am__global_test_result_rx)", "", line); \
sub("[ ]*$$", "", line); \
global_test_result = line; \
} \
else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
copy_in_global_log = 0; \
}; \
if (copy_in_global_log) \
{ \
rst_section(global_test_result ": " $$0); \
while ((rc = (getline line < ($$0 ".log"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".log"); \
print line; \
}; \
printf "\n"; \
}; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
--color-tests "$$am__color_tests" \
--enable-hard-errors "$$am__enable_hard_errors" \
--expect-failure "$$am__expect_failure"
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
# containing $f, in $tst the test, in $log the log. Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
case "$@" in \
*/*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
*) am__odir=.;; \
esac; \
test "x$$am__odir" = x"." || test -d "$$am__odir" \
|| $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
tst=$$dir$$f; log='$@'; \
if test -n '$(DISABLE_HARD_ERRORS)'; then \
am__enable_hard_errors=no; \
else \
am__enable_hard_errors=yes; \
fi; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
am__expect_failure=yes;; \
*) \
am__expect_failure=no;; \
esac; \
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed). The result is saved in the shell variable
# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
bases='$(TEST_LOGS)'; \
bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
case '$@' in \
*/*) \
case '$*' in \
*/*) b='$*';; \
*) b=`echo '$@' | sed 's/\.log$$//'`; \
esac;; \
*) \
b='$*';; \
esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
$(TEST_LOG_FLAGS)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
sim: add support for build-time ar & ranlib This is needed when building for a target whose ar & ranlib are incompatible with the current build system. For example, building for Windows on a Linux system. Then manually import the automake rule for libigen.a, but tweak the tool variables to use the FOR_BUILD variants.
2021-05-01 17:16:23 -04:00
AR_FOR_BUILD = @AR_FOR_BUILD@
sim: Fix use of out-of-tree assembler and linker when testing With commit 7a259895bb2d "sim: testsuite: expand arch specific toolchain settings", trying to use out-of-tree ld and as at test-time broke for the "primary target", like when testing a release-tarball. Subsequent to that commit, all assembler tests without in-tree-built tools FAIL, getting errors when trying to call $(abs_builddir)/../gas/as-new. But, that isn't the actual culprint; it's actually it's its immediate predecessor, commit 8996c21067373 "sim: testsuite: setup per-port toolchain settings for multitarget build", which hardcodes in-tree-paths to those tools instead of considering e.g. $(<X>_FOR_TARGET), the preferred overridable variable for single-target builds, as set up by the toplevel Makefile. This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific features aren't used) from toplev/config/acx.m4, somewhat like calls in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS step, for each X to find a value for $(<X>_FOR_TARGET). N.B.: in-tree tools still override any ${target}-${tool} found in $PATH, i.e. only previously broken builds are affected. The variables $(<X>_FOR_TARGET) are usually overridden by the toplevel Makefile to the same value or better, but has to be set here too, as automake "wants" Makefiles to be self-contained (you get an error pointing out that the variable may be empty). If it hadn't been for that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed. This detail should only (positively) affect users invoking "make check" in sim/ instead of "make check-sim" (or "make check") at the toplevel. Now the output from "configure" matches the target tools actually used by sim at test-time, for the "primary target". Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as that appears to be a deliberate special-case. Note that all tools still have to be installed and present in $PATH at configure-time to be properly used at test-time. sim: * m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET): New defun. (SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded values. * Makefile.in, configure: Regenerate.
2022-02-14 23:51:07 +01:00
AS_FOR_TARGET = @AS_FOR_TARGET@
sim: testsuite: setup per-port toolchain settings for multitarget build Gas does not support multitarget builds -- it still only supports a single input & output format. ld is a bit better, but requires manual flags to select the right output. This makes it impossible to run the complete testsuite in a multitarget build. To address this limitation, create a suite of FOR_TARGET variables so these can be set to precompiled as & ld programs. It requires a bit of setup ahead of time, but it's a one-time cost, and makes running the full testsuite at once much easier.
2021-06-23 23:23:27 -04:00
AS_FOR_TARGET_AARCH64 = @AS_FOR_TARGET_AARCH64@
AS_FOR_TARGET_ARM = @AS_FOR_TARGET_ARM@
AS_FOR_TARGET_AVR = @AS_FOR_TARGET_AVR@
AS_FOR_TARGET_BFIN = @AS_FOR_TARGET_BFIN@
AS_FOR_TARGET_BPF = @AS_FOR_TARGET_BPF@
AS_FOR_TARGET_CR16 = @AS_FOR_TARGET_CR16@
AS_FOR_TARGET_CRIS = @AS_FOR_TARGET_CRIS@
AS_FOR_TARGET_D10V = @AS_FOR_TARGET_D10V@
AS_FOR_TARGET_ERC32 = @AS_FOR_TARGET_ERC32@
AS_FOR_TARGET_EXAMPLE_SYNACOR = @AS_FOR_TARGET_EXAMPLE_SYNACOR@
AS_FOR_TARGET_FRV = @AS_FOR_TARGET_FRV@
AS_FOR_TARGET_FT32 = @AS_FOR_TARGET_FT32@
AS_FOR_TARGET_H8300 = @AS_FOR_TARGET_H8300@
AS_FOR_TARGET_IQ2000 = @AS_FOR_TARGET_IQ2000@
AS_FOR_TARGET_LM32 = @AS_FOR_TARGET_LM32@
AS_FOR_TARGET_M32C = @AS_FOR_TARGET_M32C@
AS_FOR_TARGET_M32R = @AS_FOR_TARGET_M32R@
AS_FOR_TARGET_M68HC11 = @AS_FOR_TARGET_M68HC11@
AS_FOR_TARGET_MCORE = @AS_FOR_TARGET_MCORE@
AS_FOR_TARGET_MICROBLAZE = @AS_FOR_TARGET_MICROBLAZE@
AS_FOR_TARGET_MIPS = @AS_FOR_TARGET_MIPS@
AS_FOR_TARGET_MN10300 = @AS_FOR_TARGET_MN10300@
AS_FOR_TARGET_MOXIE = @AS_FOR_TARGET_MOXIE@
AS_FOR_TARGET_MSP430 = @AS_FOR_TARGET_MSP430@
AS_FOR_TARGET_OR1K = @AS_FOR_TARGET_OR1K@
AS_FOR_TARGET_PPC = @AS_FOR_TARGET_PPC@
AS_FOR_TARGET_PRU = @AS_FOR_TARGET_PRU@
AS_FOR_TARGET_RISCV = @AS_FOR_TARGET_RISCV@
AS_FOR_TARGET_RL78 = @AS_FOR_TARGET_RL78@
AS_FOR_TARGET_RX = @AS_FOR_TARGET_RX@
AS_FOR_TARGET_SH = @AS_FOR_TARGET_SH@
AS_FOR_TARGET_V850 = @AS_FOR_TARGET_V850@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
sim: Fix use of out-of-tree assembler and linker when testing With commit 7a259895bb2d "sim: testsuite: expand arch specific toolchain settings", trying to use out-of-tree ld and as at test-time broke for the "primary target", like when testing a release-tarball. Subsequent to that commit, all assembler tests without in-tree-built tools FAIL, getting errors when trying to call $(abs_builddir)/../gas/as-new. But, that isn't the actual culprint; it's actually it's its immediate predecessor, commit 8996c21067373 "sim: testsuite: setup per-port toolchain settings for multitarget build", which hardcodes in-tree-paths to those tools instead of considering e.g. $(<X>_FOR_TARGET), the preferred overridable variable for single-target builds, as set up by the toplevel Makefile. This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific features aren't used) from toplev/config/acx.m4, somewhat like calls in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS step, for each X to find a value for $(<X>_FOR_TARGET). N.B.: in-tree tools still override any ${target}-${tool} found in $PATH, i.e. only previously broken builds are affected. The variables $(<X>_FOR_TARGET) are usually overridden by the toplevel Makefile to the same value or better, but has to be set here too, as automake "wants" Makefiles to be self-contained (you get an error pointing out that the variable may be empty). If it hadn't been for that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed. This detail should only (positively) affect users invoking "make check" in sim/ instead of "make check-sim" (or "make check") at the toplevel. Now the output from "configure" matches the target tools actually used by sim at test-time, for the "primary target". Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as that appears to be a deliberate special-case. Note that all tools still have to be installed and present in $PATH at configure-time to be properly used at test-time. sim: * m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET): New defun. (SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded values. * Makefile.in, configure: Regenerate.
2022-02-14 23:51:07 +01:00
CC_FOR_TARGET = @CC_FOR_TARGET@
sim: testsuite: setup per-port toolchain settings for multitarget build Gas does not support multitarget builds -- it still only supports a single input & output format. ld is a bit better, but requires manual flags to select the right output. This makes it impossible to run the complete testsuite in a multitarget build. To address this limitation, create a suite of FOR_TARGET variables so these can be set to precompiled as & ld programs. It requires a bit of setup ahead of time, but it's a one-time cost, and makes running the full testsuite at once much easier.
2021-06-23 23:23:27 -04:00
CC_FOR_TARGET_AARCH64 = @CC_FOR_TARGET_AARCH64@
CC_FOR_TARGET_ARM = @CC_FOR_TARGET_ARM@
CC_FOR_TARGET_AVR = @CC_FOR_TARGET_AVR@
CC_FOR_TARGET_BFIN = @CC_FOR_TARGET_BFIN@
CC_FOR_TARGET_BPF = @CC_FOR_TARGET_BPF@
CC_FOR_TARGET_CR16 = @CC_FOR_TARGET_CR16@
CC_FOR_TARGET_CRIS = @CC_FOR_TARGET_CRIS@
CC_FOR_TARGET_D10V = @CC_FOR_TARGET_D10V@
CC_FOR_TARGET_ERC32 = @CC_FOR_TARGET_ERC32@
CC_FOR_TARGET_EXAMPLE_SYNACOR = @CC_FOR_TARGET_EXAMPLE_SYNACOR@
CC_FOR_TARGET_FRV = @CC_FOR_TARGET_FRV@
CC_FOR_TARGET_FT32 = @CC_FOR_TARGET_FT32@
CC_FOR_TARGET_H8300 = @CC_FOR_TARGET_H8300@
CC_FOR_TARGET_IQ2000 = @CC_FOR_TARGET_IQ2000@
CC_FOR_TARGET_LM32 = @CC_FOR_TARGET_LM32@
CC_FOR_TARGET_M32C = @CC_FOR_TARGET_M32C@
CC_FOR_TARGET_M32R = @CC_FOR_TARGET_M32R@
CC_FOR_TARGET_M68HC11 = @CC_FOR_TARGET_M68HC11@
CC_FOR_TARGET_MCORE = @CC_FOR_TARGET_MCORE@
CC_FOR_TARGET_MICROBLAZE = @CC_FOR_TARGET_MICROBLAZE@
CC_FOR_TARGET_MIPS = @CC_FOR_TARGET_MIPS@
CC_FOR_TARGET_MN10300 = @CC_FOR_TARGET_MN10300@
CC_FOR_TARGET_MOXIE = @CC_FOR_TARGET_MOXIE@
CC_FOR_TARGET_MSP430 = @CC_FOR_TARGET_MSP430@
CC_FOR_TARGET_OR1K = @CC_FOR_TARGET_OR1K@
CC_FOR_TARGET_PPC = @CC_FOR_TARGET_PPC@
CC_FOR_TARGET_PRU = @CC_FOR_TARGET_PRU@
CC_FOR_TARGET_RISCV = @CC_FOR_TARGET_RISCV@
CC_FOR_TARGET_RL78 = @CC_FOR_TARGET_RL78@
CC_FOR_TARGET_RX = @CC_FOR_TARGET_RX@
CC_FOR_TARGET_SH = @CC_FOR_TARGET_SH@
CC_FOR_TARGET_V850 = @CC_FOR_TARGET_V850@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
CFLAGS = @CFLAGS@
CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
sim: unify cgen maintainer settings Move these options up to the common dir so we only test & export them once across all ports. It makes it available to targets that aren't cgen-based, but those will just ignore the settings, so it shouldn't be an issue.
2021-06-19 10:42:37 -04:00
CGEN_MAINT = @CGEN_MAINT@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
C_DIALECT = @C_DIALECT@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
DATADIRNAME = @DATADIRNAME@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
DEFS = @DEFS@
DEPDIR = @DEPDIR@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
DSYMUTIL = @DSYMUTIL@
sim: unify dtc tool checks Only one arch uses this currently, but others could too. By moving it up to the common checks, it'll also let us simplify the moxie code significantly.
2021-06-19 22:13:00 -04:00
DTC = @DTC@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
DUMPBIN = @DUMPBIN@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
EGREP = @EGREP@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
EXEEXT = @EXEEXT@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
FGREP = @FGREP@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
GREP = @GREP@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
INCINTL = @INCINTL@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
INSTOBJEXT = @INSTOBJEXT@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
LD = @LD@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
LDFLAGS = @LDFLAGS@
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
sim: Fix use of out-of-tree assembler and linker when testing With commit 7a259895bb2d "sim: testsuite: expand arch specific toolchain settings", trying to use out-of-tree ld and as at test-time broke for the "primary target", like when testing a release-tarball. Subsequent to that commit, all assembler tests without in-tree-built tools FAIL, getting errors when trying to call $(abs_builddir)/../gas/as-new. But, that isn't the actual culprint; it's actually it's its immediate predecessor, commit 8996c21067373 "sim: testsuite: setup per-port toolchain settings for multitarget build", which hardcodes in-tree-paths to those tools instead of considering e.g. $(<X>_FOR_TARGET), the preferred overridable variable for single-target builds, as set up by the toplevel Makefile. This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific features aren't used) from toplev/config/acx.m4, somewhat like calls in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS step, for each X to find a value for $(<X>_FOR_TARGET). N.B.: in-tree tools still override any ${target}-${tool} found in $PATH, i.e. only previously broken builds are affected. The variables $(<X>_FOR_TARGET) are usually overridden by the toplevel Makefile to the same value or better, but has to be set here too, as automake "wants" Makefiles to be self-contained (you get an error pointing out that the variable may be empty). If it hadn't been for that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed. This detail should only (positively) affect users invoking "make check" in sim/ instead of "make check-sim" (or "make check") at the toplevel. Now the output from "configure" matches the target tools actually used by sim at test-time, for the "primary target". Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as that appears to be a deliberate special-case. Note that all tools still have to be installed and present in $PATH at configure-time to be properly used at test-time. sim: * m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET): New defun. (SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded values. * Makefile.in, configure: Regenerate.
2022-02-14 23:51:07 +01:00
LD_FOR_TARGET = @LD_FOR_TARGET@
sim: testsuite: setup per-port toolchain settings for multitarget build Gas does not support multitarget builds -- it still only supports a single input & output format. ld is a bit better, but requires manual flags to select the right output. This makes it impossible to run the complete testsuite in a multitarget build. To address this limitation, create a suite of FOR_TARGET variables so these can be set to precompiled as & ld programs. It requires a bit of setup ahead of time, but it's a one-time cost, and makes running the full testsuite at once much easier.
2021-06-23 23:23:27 -04:00
LD_FOR_TARGET_AARCH64 = @LD_FOR_TARGET_AARCH64@
LD_FOR_TARGET_ARM = @LD_FOR_TARGET_ARM@
LD_FOR_TARGET_AVR = @LD_FOR_TARGET_AVR@
LD_FOR_TARGET_BFIN = @LD_FOR_TARGET_BFIN@
LD_FOR_TARGET_BPF = @LD_FOR_TARGET_BPF@
LD_FOR_TARGET_CR16 = @LD_FOR_TARGET_CR16@
LD_FOR_TARGET_CRIS = @LD_FOR_TARGET_CRIS@
LD_FOR_TARGET_D10V = @LD_FOR_TARGET_D10V@
LD_FOR_TARGET_ERC32 = @LD_FOR_TARGET_ERC32@
LD_FOR_TARGET_EXAMPLE_SYNACOR = @LD_FOR_TARGET_EXAMPLE_SYNACOR@
LD_FOR_TARGET_FRV = @LD_FOR_TARGET_FRV@
LD_FOR_TARGET_FT32 = @LD_FOR_TARGET_FT32@
LD_FOR_TARGET_H8300 = @LD_FOR_TARGET_H8300@
LD_FOR_TARGET_IQ2000 = @LD_FOR_TARGET_IQ2000@
LD_FOR_TARGET_LM32 = @LD_FOR_TARGET_LM32@
LD_FOR_TARGET_M32C = @LD_FOR_TARGET_M32C@
LD_FOR_TARGET_M32R = @LD_FOR_TARGET_M32R@
LD_FOR_TARGET_M68HC11 = @LD_FOR_TARGET_M68HC11@
LD_FOR_TARGET_MCORE = @LD_FOR_TARGET_MCORE@
LD_FOR_TARGET_MICROBLAZE = @LD_FOR_TARGET_MICROBLAZE@
LD_FOR_TARGET_MIPS = @LD_FOR_TARGET_MIPS@
LD_FOR_TARGET_MN10300 = @LD_FOR_TARGET_MN10300@
LD_FOR_TARGET_MOXIE = @LD_FOR_TARGET_MOXIE@
LD_FOR_TARGET_MSP430 = @LD_FOR_TARGET_MSP430@
LD_FOR_TARGET_OR1K = @LD_FOR_TARGET_OR1K@
LD_FOR_TARGET_PPC = @LD_FOR_TARGET_PPC@
LD_FOR_TARGET_PRU = @LD_FOR_TARGET_PRU@
LD_FOR_TARGET_RISCV = @LD_FOR_TARGET_RISCV@
LD_FOR_TARGET_RL78 = @LD_FOR_TARGET_RL78@
LD_FOR_TARGET_RX = @LD_FOR_TARGET_RX@
LD_FOR_TARGET_SH = @LD_FOR_TARGET_SH@
LD_FOR_TARGET_V850 = @LD_FOR_TARGET_V850@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
LTLIBOBJS = @LTLIBOBJS@
Enable maintainer mode for sim The sim's recently switch to using Automake caused a build failure for me, because I didn't have the correct auto* tools in my path. However, the rule in the tree is that this is not needed in general. This patch adds a call to AM_MAINTAINER_MODE, to align the sim with the way the rest of the tree works here. sim/ChangeLog 2021-03-08 Tom Tromey <tromey@adacore.com> * aclocal.m4, configure, Makefile.in: Rebuild. * configure.ac: Use AM_MAINTAINER_MODE.
2021-03-08 07:48:20 -07:00
MAINT = @MAINT@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
OBJEXT = @OBJEXT@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
sim: unify bug & package settings Move these options up to the common dir so we only test & export them once across all ports. The AC_INIT macro does a lot of the heavy lifting already which allows further simplification.
2021-06-06 20:48:46 -04:00
PKGVERSION = @PKGVERSION@
sim: bfin: move pkg-config & SDL checks to common code This reduces the unique logic in bfin/configure to make it easier to (eventually) unify it entirely.
2021-06-26 10:43:27 -04:00
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
POSUB = @POSUB@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
RANLIB = @RANLIB@
sim: add support for build-time ar & ranlib This is needed when building for a target whose ar & ranlib are incompatible with the current build system. For example, building for Windows on a Linux system. Then manually import the automake rule for libigen.a, but tweak the tool variables to use the FOR_BUILD variants.
2021-05-01 17:16:23 -04:00
RANLIB_FOR_BUILD = @RANLIB_FOR_BUILD@
sim: erc32: merge with common configure script Move the unique library tests to the common code so we can delete the erc32 configure logic entirely.
2021-06-26 10:49:32 -04:00
READLINE_CFLAGS = @READLINE_CFLAGS@
READLINE_LIB = @READLINE_LIB@
sim: unify bug & package settings Move these options up to the common dir so we only test & export them once across all ports. The AC_INIT macro does a lot of the heavy lifting already which allows further simplification.
2021-06-06 20:48:46 -04:00
REPORT_BUGS_TEXI = @REPORT_BUGS_TEXI@
REPORT_BUGS_TO = @REPORT_BUGS_TO@
sim: bfin: move pkg-config & SDL checks to common code This reduces the unique logic in bfin/configure to make it easier to (eventually) unify it entirely.
2021-06-26 10:43:27 -04:00
SDL_CFLAGS = @SDL_CFLAGS@
SDL_LIBS = @SDL_LIBS@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
SED = @SED@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
SIM_COMMON_BUILD_FALSE = @SIM_COMMON_BUILD_FALSE@
SIM_COMMON_BUILD_TRUE = @SIM_COMMON_BUILD_TRUE@
sim: cris/frv/iq2000/lm32: merge with common configure script Now that the scache logic has been migrated into the common code, there's nothing specific in these configure scripts, so merge them into the common one. The frv unique logic can be moved to a dedicated include and merged in the common configure since the flag has been scoped to the arch.
2021-06-30 13:01:17 -04:00
SIM_FRV_TRAPDUMP_FLAGS = @SIM_FRV_TRAPDUMP_FLAGS@
sim: move sim-inline to the common code This will allow us to build the common code with the same inline settings as the arch subdirs, and only do the test once.
2021-06-15 22:45:07 -04:00
SIM_INLINE = @SIM_INLINE@
sim: add preliminary support for --enable-targets This doesn't actually create one `run` program like other projects, but creates multiple `run-$arch` targets. While it might not seem that useful initially, this has some nice properties: - Allows us to quickly build all sim targets in a single tree. - Positions us better for converting targets over to a proper multitarget build+install. We don't have the ability to actually run tests against them, but that's due to a limitation in gas: it doesn't support multitarget. If that ever changes, we should be able to turn on our tests too. We can improve the test framework to fallback to a system toolchain if available to help mitigate that.
2021-01-16 02:27:38 -05:00
SIM_PRIMARY_TARGET = @SIM_PRIMARY_TARGET@
sim: rx: merge with common configure script Move the unique configure flag to acinclude.m4 so the common code can include it, then delete the rx configure logic entirely.
2021-06-20 01:04:34 -04:00
SIM_RX_CYCLE_ACCURATE_FLAGS = @SIM_RX_CYCLE_ACCURATE_FLAGS@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
SIM_SUBDIRS = @SIM_SUBDIRS@
sim: testsuite: setup per-port toolchain settings for multitarget build Gas does not support multitarget builds -- it still only supports a single input & output format. ld is a bit better, but requires manual flags to select the right output. This makes it impossible to run the complete testsuite in a multitarget build. To address this limitation, create a suite of FOR_TARGET variables so these can be set to precompiled as & ld programs. It requires a bit of setup ahead of time, but it's a one-time cost, and makes running the full testsuite at once much easier.
2021-06-23 23:23:27 -04:00
SIM_TOOLCHAIN_VARS = @SIM_TOOLCHAIN_VARS@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
STRIP = @STRIP@
sim: erc32: merge with common configure script Move the unique library tests to the common code so we can delete the erc32 configure logic entirely.
2021-06-26 10:49:32 -04:00
TERMCAP_LIB = @TERMCAP_LIB@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
USE_NLS = @USE_NLS@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
VERSION = @VERSION@
sim: unify -Werror build settings Move these options up to the common dir so we only test & export them once across all ports. It also enables -Werror usage on the common files we've been pulling out of arch subdirs.
2021-06-18 01:14:39 -04:00
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@
sim: unify gettext/intl probing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 00:52:10 -04:00
XGETTEXT = @XGETTEXT@
sim: Link ZSTD_LIBS This fixes linker errors in a `../../configure --enable-targets --enable-sim; make all-gdb` build.
2022-09-27 11:42:32 -07:00
ZSTD_CFLAGS = @ZSTD_CFLAGS@
ZSTD_LIBS = @ZSTD_LIBS@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
abs_builddir = @abs_builddir@
sim: common: delete configure & Makefile This was mostly orphaned a while back, but left behind so people could still run `make headers`. Merge that one target to the top sim dir and delete all the build logic. This should avoid confusing people further.
2021-01-17 05:32:12 -05:00
abs_srcdir = @abs_srcdir@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
sim: unify cgen maintainer settings Move these options up to the common dir so we only test & export them once across all ports. It makes it available to targets that aren't cgen-based, but those will just ignore the settings, so it shouldn't be an issue.
2021-06-19 10:42:37 -04:00
cgen = @cgen@
cgendir = @cgendir@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
exec_prefix = @exec_prefix@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
host = @host@
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
host_alias = @host_alias@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
libdir = @libdir@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
lt_cv_dlopen_libs = @lt_cv_dlopen_libs@
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
mandir = @mandir@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
sim_bitsize = @sim_bitsize@
sim_float = @sim_float@
sim: unify hardware settings Move these options up to the common dir so we only test & export them once across all ports.
2021-06-19 20:06:12 -04:00
sim_hw_cflags = @sim_hw_cflags@
sim_hw_sockser = @sim_hw_sockser@
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
zlibdir = @zlibdir@
zlibinc = @zlibinc@
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
AUTOMAKE_OPTIONS = dejagnu foreign no-dist subdir-objects
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
ACLOCAL_AMFLAGS = -Im4 -I.. -I../config
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
srccom = $(srcdir)/common
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
srcroot = $(srcdir)/..
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
SUBDIRS = @subdirs@ $(SIM_SUBDIRS)
sim: add preliminary support for --enable-targets This doesn't actually create one `run` program like other projects, but creates multiple `run-$arch` targets. While it might not seem that useful initially, this has some nice properties: - Allows us to quickly build all sim targets in a single tree. - Positions us better for converting targets over to a proper multitarget build+install. We don't have the ability to actually run tests against them, but that's due to a limitation in gas: it doesn't support multitarget. If that ever changes, we should be able to turn on our tests too. We can improve the test framework to fallback to a system toolchain if available to help mitigate that.
2021-01-16 02:27:38 -05:00
AM_MAKEFLAGS = SIM_PRIMARY_TARGET=$(SIM_PRIMARY_TARGET)
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
pkginclude_HEADERS = $(am__append_1)
noinst_LIBRARIES = common/libcommon.a $(am__append_3)
sim: switch modules.c & version.c to stamp files This fixes remaking of these files and avoids unnecessary rebuilds. Also add both to `make clean` to match other stamp files.
2021-06-14 20:38:52 -04:00
CLEANFILES = common/version.c common/version.c-stamp \
testsuite/common/bits-gen testsuite/common/bits32m0.c \
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite/common/bits32m31.c testsuite/common/bits64m0.c \
testsuite/common/bits64m63.c
sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled).
2022-10-09 03:57:12 +00:00
DISTCLEANFILES = $(am__append_32)
sim: testsuite: fix objdir handling The tests assume that the cwd is the objdir directory and write its intermediates to there all the time. When using runtest's --objdir setting though, this puts the files in the wrong place. This isn't a big problem currently as we never change --objdir, but in order to support parallel test execution, we're going to start setting that option, so clean up the code ahead of time. We also have to tweak some of the cris tests which were making assumptions about the argv[0] value.
2021-11-21 03:06:20 -05:00
MOSTLYCLEANFILES = core $(am__append_5) site-sim-config.exp \
testrun.log testrun.sum $(am__append_7) $(am__append_10) \
$(am__append_12) $(am__append_15) $(am__append_17) \
$(am__append_19) $(am__append_21) $(am__append_24) \
$(am__append_26) $(am__append_29) $(am__append_31) \
sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled).
2022-10-09 03:57:12 +00:00
$(am__append_34) $(am__append_37) $(am__append_39)
sim: unify -Werror build settings Move these options up to the common dir so we only test & export them once across all ports. It also enables -Werror usage on the common files we've been pulling out of arch subdirs.
2021-06-18 01:14:39 -04:00
AM_CFLAGS = $(WERROR_CFLAGS) $(WARN_CFLAGS)
sim: move sim-inline to the common code This will allow us to build the common code with the same inline settings as the arch subdirs, and only do the test once.
2021-06-15 22:45:07 -04:00
AM_CPPFLAGS = -I$(srcroot)/include $(SIM_INLINE) -I$(srcdir)/common
sim: unify toolchain settings The toplevel, common, and igen dirs all have their own code for setting up toolchain settings. Unify all of that in a new macro.
2021-01-17 14:45:25 -05:00
COMPILE_FOR_BUILD = $(CC_FOR_BUILD) $(AM_CPPFLAGS) $(CFLAGS_FOR_BUILD)
LINK_FOR_BUILD = $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@
sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone.
2021-11-18 19:10:28 -05:00
SIM_ALL_RECURSIVE_DEPS = common/libcommon.a $(am__append_2) \
$(am__append_6) $(am__append_8) $(am__append_11) \
$(am__append_13) $(am__append_16) $(am__append_18) \
$(am__append_20) $(am__append_22) $(am__append_25) \
sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled).
2022-10-09 03:57:12 +00:00
$(am__append_27) $(am__append_30) $(am__append_33) \
$(am__append_35) $(am__append_38)
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common_libcommon_a_CPPFLAGS = \
$(AM_CPPFLAGS) \
-DSIM_COMMON_BUILD \
-I../bfd \
-I..
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
common_libcommon_a_SOURCES = \
sim: unify callback.o building Now that the use of TARGET_xxx defines have been removed, we can move this to the common logic so we only build it once for multi-targets.
2021-07-06 23:44:38 -04:00
common/callback.c \
sim: start unifying portability shims There are some functions that gnulib does not yet provide fallbacks for, so start a common file of our own for holding existing stubs.
2021-05-29 16:07:43 -04:00
common/portability.c \
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common/sim-load.c \
sim: unify syscall.o building Now that we've unified all the syscall tables, this file does not rely on any port-specific settings, so move it up to building as part of the common step so we only do it once in a multibuild.
2021-11-28 13:23:02 -05:00
common/syscall.c \
sim: nltvals: pull target errno out into a dedicated source file The current system maintains a list of target errno constants in the nltvals.def file, then runs a build-time tool to turn that into a C file. This list of errno values is the same for all arches, so we don't need the arch-specific flexibility. Further, these are only for newlib/libgloss environments, which makes it confusing to support other userland runtimes (like Linux). Let's simplify to make this easier to understand & build. We don't namespace the variables yet, but sets up the framework for it. Create a new target-newlib-errno.c template file. The template file is hand written, but the inline map is still automatically generated. This allows us to move it to the common set of objects so it's only built once in a multi-target build. Now we can remove the output from the gentmap build-time tool since it's checked into the tree. Then we stop including the errno lists in nltvals.def since nothing uses it.
2021-07-06 22:10:53 -04:00
common/target-newlib-errno.c \
sim: nltvals: pull target open flags out into a dedicated source file Like we just did for pulling out the errno & signal maps, pull out the open flag map into a dedicated common file. All newlib ports are using the same map which makes it easy.
2021-07-06 23:37:56 -04:00
common/target-newlib-open.c \
sim: nltvals: pull target signal out into a dedicated source file Like we just did for pulling out the errno map, pull out the signal map into a dedicated common file. All newlib ports are using the same signal map which makes it easy.
2021-07-06 22:43:10 -04:00
common/target-newlib-signal.c \
sim: nltvals: pull target syscalls out into a dedicated source file Like we just did for pulling out the errno map, pull out the syscall maps into a dedicated common file. Most newlib ports are using the same syscall map, but not all, which means we have to do a bit more work to migrate. This commit adds the maps and switches the ports using the common default syscall table over to it. Ports using unique syscall tables are still using the old targ-map.c logic. Switching common ports over is easy by checking NL_TARGET, but the ppc code needs a bit more cleanup here hence its larger diff.
2021-11-01 01:31:44 -04:00
common/target-newlib-syscall.c \
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
common/version.c
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
# igen leaks memory, and therefore makes AddressSanitizer unhappy. Disable
# leak detection while running it.
@SIM_ENABLE_IGEN_TRUE@IGEN = igen/igen$(EXEEXT)
@SIM_ENABLE_IGEN_TRUE@IGEN_RUN = ASAN_OPTIONS=detect_leaks=0 $(IGEN)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
@SIM_ENABLE_IGEN_TRUE@igen_libigen_a_SOURCES = \
@SIM_ENABLE_IGEN_TRUE@ igen/table.c \
@SIM_ENABLE_IGEN_TRUE@ igen/lf.c \
@SIM_ENABLE_IGEN_TRUE@ igen/misc.c \
@SIM_ENABLE_IGEN_TRUE@ igen/filter_host.c \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode.c \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache.c \
@SIM_ENABLE_IGEN_TRUE@ igen/filter.c \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-model.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-itable.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-icache.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-semantics.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-idecode.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-support.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-engine.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen.c
@SIM_ENABLE_IGEN_TRUE@igen_igen_SOURCES = igen/igen.c
@SIM_ENABLE_IGEN_TRUE@igen_igen_LDADD = igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_filter_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_filter_LDADD = igen/filter-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_gen_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_gen_LDADD = igen/gen-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_LDADD = igen/ld-cache-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_LDADD = igen/ld-decode-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_LDADD = igen/ld-insn-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_table_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_table_LDADD = igen/table-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_IGEN_TOOLS = \
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
@SIM_ENABLE_IGEN_TRUE@ $(IGEN) \
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
@SIM_ENABLE_IGEN_TRUE@ igen/filter \
@SIM_ENABLE_IGEN_TRUE@ igen/gen \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn \
@SIM_ENABLE_IGEN_TRUE@ igen/table
sim: testsuite: fix objdir handling The tests assume that the cwd is the objdir directory and write its intermediates to there all the time. When using runtest's --objdir setting though, this puts the files in the wrong place. This isn't a big problem currently as we never change --objdir, but in order to support parallel test execution, we're going to start setting that option, so clean up the code ahead of time. We also have to tweak some of the cris tests which were making assumptions about the argv[0] value.
2021-11-21 03:06:20 -05:00
EXTRA_DEJAGNU_SITE_CONFIG = site-sim-config.exp
sim: testsuite: add more silent build rules site.exp is still verbose, but that comes from automake, so have to get it fixed upstream.
2021-11-16 19:23:58 -05:00
# Custom verbose test variables that automake doesn't provide (yet?).
AM_V_RUNTEST = $(AM_V_RUNTEST_@AM_V@)
AM_V_RUNTEST_ = $(AM_V_RUNTEST_@AM_DEFAULT_V@)
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
AM_V_RUNTEST_0 = @echo " RUNTEST $(RUNTESTFLAGS) $*";
sim: testsuite: add more silent build rules site.exp is still verbose, but that comes from automake, so have to get it fixed upstream.
2021-11-16 19:23:58 -05:00
AM_V_RUNTEST_1 =
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
DO_RUNTEST = \
LC_ALL=C; export LC_ALL; \
EXPECT=${EXPECT} ; export EXPECT ; \
runtest=$(RUNTEST); \
$$runtest $(RUNTESTFLAGS)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite_common_CPPFLAGS = \
-I$(srcdir)/common \
sim: Add bfd include path for common testsuite tools On a host without installed libbfd, this patch fixes the following "make check-sim" errors for both pru cross target, and native x86_64: In file included from ../../../binutils/sim/common/sim-basics.h:131, from testsuite/common/bits32m0.c:13:../../../binutils/sim/../include/gdb/callback.h:55:10: fatal error: bfd.h: No such file or directory 55 | #include "bfd.h" | ^~~~~~~ Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2021-04-05 19:21:35 +03:00
-I$(srcroot)/include \
-I../bfd
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
sim: install various doc files
2021-11-18 19:32:31 -05:00
@SIM_ENABLE_ARCH_arm_TRUE@armdocdir = $(docdir)/arm
@SIM_ENABLE_ARCH_arm_TRUE@armdoc_DATA = arm/README
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_bpf_TRUE@bpf_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_bpf_TRUE@ bpf/eng-le.h \
@SIM_ENABLE_ARCH_bpf_TRUE@ bpf/mloop-le.c \
@SIM_ENABLE_ARCH_bpf_TRUE@ bpf/stamp-mloop-le \
@SIM_ENABLE_ARCH_bpf_TRUE@ bpf/eng-be.h \
@SIM_ENABLE_ARCH_bpf_TRUE@ bpf/mloop-be.c \
@SIM_ENABLE_ARCH_bpf_TRUE@ bpf/stamp-mloop-be
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_cr16_TRUE@cr16_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_cr16_TRUE@ cr16/gencode$(EXEEXT) \
@SIM_ENABLE_ARCH_cr16_TRUE@ cr16/simops.h \
@SIM_ENABLE_ARCH_cr16_TRUE@ cr16/table.c
@SIM_ENABLE_ARCH_cr16_TRUE@cr16_gencode_SOURCES = cr16/gencode.c
@SIM_ENABLE_ARCH_cr16_TRUE@cr16_gencode_LDADD = cr16/cr16-opc.o
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_cris_TRUE@cris_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_cris_TRUE@ cris/engv10.h \
@SIM_ENABLE_ARCH_cris_TRUE@ cris/mloopv10f.c \
@SIM_ENABLE_ARCH_cris_TRUE@ cris/stamp-mloop-v10f \
@SIM_ENABLE_ARCH_cris_TRUE@ cris/engv32.h \
@SIM_ENABLE_ARCH_cris_TRUE@ cris/mloopv32f.c \
@SIM_ENABLE_ARCH_cris_TRUE@ cris/stamp-mloop-v32f
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_d10v_TRUE@d10v_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_d10v_TRUE@ d10v/gencode$(EXEEXT) \
@SIM_ENABLE_ARCH_d10v_TRUE@ d10v/simops.h \
@SIM_ENABLE_ARCH_d10v_TRUE@ d10v/table.c
@SIM_ENABLE_ARCH_d10v_TRUE@d10v_gencode_SOURCES = d10v/gencode.c
@SIM_ENABLE_ARCH_d10v_TRUE@d10v_gencode_LDADD = d10v/d10v-opc.o
sim: install various doc files
2021-11-18 19:32:31 -05:00
@SIM_ENABLE_ARCH_erc32_TRUE@erc32docdir = $(docdir)/erc32
@SIM_ENABLE_ARCH_erc32_TRUE@erc32doc_DATA = erc32/README.erc32 erc32/README.gdb erc32/README.sis
@SIM_ENABLE_ARCH_frv_TRUE@frvdocdir = $(docdir)/frv
@SIM_ENABLE_ARCH_frv_TRUE@frvdoc_DATA = frv/README
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_frv_TRUE@frv_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_frv_TRUE@ frv/eng.h \
@SIM_ENABLE_ARCH_frv_TRUE@ frv/mloop.c \
@SIM_ENABLE_ARCH_frv_TRUE@ frv/stamp-mloop
@SIM_ENABLE_ARCH_iq2000_TRUE@iq2000_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_iq2000_TRUE@ iq2000/eng.h \
@SIM_ENABLE_ARCH_iq2000_TRUE@ iq2000/mloop.c \
@SIM_ENABLE_ARCH_iq2000_TRUE@ iq2000/stamp-mloop
@SIM_ENABLE_ARCH_lm32_TRUE@lm32_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_lm32_TRUE@ lm32/eng.h \
@SIM_ENABLE_ARCH_lm32_TRUE@ lm32/mloop.c \
@SIM_ENABLE_ARCH_lm32_TRUE@ lm32/stamp-mloop
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_m32c_TRUE@m32c_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_m32c_TRUE@ m32c/opc2c$(EXEEXT) \
@SIM_ENABLE_ARCH_m32c_TRUE@ m32c/m32c.c \
@SIM_ENABLE_ARCH_m32c_TRUE@ m32c/r8c.c
@SIM_ENABLE_ARCH_m32c_TRUE@m32c_opc2c_SOURCES = m32c/opc2c.c
# opc2c leaks memory, and therefore makes AddressSanitizer unhappy. Disable
# leak detection while running it.
@SIM_ENABLE_ARCH_m32c_TRUE@m32c_OPC2C_RUN = ASAN_OPTIONS=detect_leaks=0 m32c/opc2c$(EXEEXT)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_m32r_TRUE@m32r_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/eng.h \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/mloop.c \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/stamp-mloop \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/engx.h \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/mloopx.c \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/stamp-mloop-x \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/eng2.h \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/mloop2.c \
@SIM_ENABLE_ARCH_m32r_TRUE@ m32r/stamp-mloop-2
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_m68hc11_TRUE@m68hc11_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_m68hc11_TRUE@ m68hc11/gencode$(EXEEXT) \
@SIM_ENABLE_ARCH_m68hc11_TRUE@ m68hc11/m68hc11int.c \
@SIM_ENABLE_ARCH_m68hc11_TRUE@ m68hc11/m68hc12int.c
@SIM_ENABLE_ARCH_m68hc11_TRUE@m68hc11_gencode_SOURCES = m68hc11/gencode.c
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
@SIM_ENABLE_ARCH_mn10300_TRUE@mn10300_BUILT_SRC_FROM_IGEN = \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/icache.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/icache.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/idecode.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/idecode.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/semantics.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/semantics.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/model.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/model.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/support.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/support.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/itable.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/itable.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/engine.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/engine.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/irun.c
@SIM_ENABLE_ARCH_mn10300_TRUE@mn10300_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(mn10300_BUILT_SRC_FROM_IGEN) \
@SIM_ENABLE_ARCH_mn10300_TRUE@ mn10300/stamp-igen
@SIM_ENABLE_ARCH_mn10300_TRUE@mn10300_IGEN_TRACE = # -G omit-line-numbers # -G trace-rule-selection -G trace-rule-rejection -G trace-entries
@SIM_ENABLE_ARCH_mn10300_TRUE@mn10300_IGEN_INSN = $(srcdir)/mn10300/mn10300.igen
@SIM_ENABLE_ARCH_mn10300_TRUE@mn10300_IGEN_INSN_INC = mn10300/am33.igen mn10300/am33-2.igen
@SIM_ENABLE_ARCH_mn10300_TRUE@mn10300_IGEN_DC = $(srcdir)/mn10300/mn10300.dc
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
@SIM_ENABLE_ARCH_moxie_TRUE@dtbdir = $(datadir)/gdb/dtb
@SIM_ENABLE_ARCH_moxie_TRUE@dtb_DATA = moxie/moxie-gdb.dtb
sim: install various doc files
2021-11-18 19:32:31 -05:00
@SIM_ENABLE_ARCH_or1k_TRUE@or1kdocdir = $(docdir)/or1k
@SIM_ENABLE_ARCH_or1k_TRUE@or1kdoc_DATA = or1k/README
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_or1k_TRUE@or1k_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_or1k_TRUE@ or1k/eng.h \
@SIM_ENABLE_ARCH_or1k_TRUE@ or1k/mloop.c \
@SIM_ENABLE_ARCH_or1k_TRUE@ or1k/stamp-mloop
sim: install various doc files
2021-11-18 19:32:31 -05:00
@SIM_ENABLE_ARCH_ppc_TRUE@ppcdocdir = $(docdir)/ppc
@SIM_ENABLE_ARCH_ppc_TRUE@ppcdoc_DATA = ppc/BUGS ppc/INSTALL ppc/README ppc/RUN
@SIM_ENABLE_ARCH_rx_TRUE@rxdocdir = $(docdir)/rx
@SIM_ENABLE_ARCH_rx_TRUE@rxdoc_DATA = rx/README.txt
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@SIM_ENABLE_ARCH_sh_TRUE@sh_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_sh_TRUE@ sh/gencode$(EXEEXT) \
@SIM_ENABLE_ARCH_sh_TRUE@ sh/code.c \
@SIM_ENABLE_ARCH_sh_TRUE@ sh/ppi.c \
@SIM_ENABLE_ARCH_sh_TRUE@ sh/table.c
@SIM_ENABLE_ARCH_sh_TRUE@sh_gencode_SOURCES = sh/gencode.c
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
@SIM_ENABLE_ARCH_v850_TRUE@v850_BUILT_SRC_FROM_IGEN = \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/icache.h \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/icache.c \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/idecode.h \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/idecode.c \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/semantics.h \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/semantics.c \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/model.h \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/model.c \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/support.h \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/support.c \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/itable.h \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/itable.c \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/engine.h \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/engine.c \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/irun.c
@SIM_ENABLE_ARCH_v850_TRUE@v850_BUILD_OUTPUTS = \
@SIM_ENABLE_ARCH_v850_TRUE@ $(v850_BUILT_SRC_FROM_IGEN) \
@SIM_ENABLE_ARCH_v850_TRUE@ v850/stamp-igen
@SIM_ENABLE_ARCH_v850_TRUE@v850_IGEN_TRACE = # -G omit-line-numbers # -G trace-rule-selection -G trace-rule-rejection -G trace-entries
@SIM_ENABLE_ARCH_v850_TRUE@v850_IGEN_INSN = $(srcdir)/v850/v850.igen
@SIM_ENABLE_ARCH_v850_TRUE@v850_IGEN_DC = $(srcdir)/v850/v850-dc
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
.SUFFIXES:
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
am--refresh: Makefile
@:
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/common/local.mk $(srcdir)/igen/local.mk $(srcdir)/testsuite/local.mk $(srcdir)/testsuite/common/local.mk $(srcdir)/arm/local.mk $(srcdir)/bpf/local.mk $(srcdir)/cr16/local.mk $(srcdir)/cris/local.mk $(srcdir)/d10v/local.mk $(srcdir)/erc32/local.mk $(srcdir)/frv/local.mk $(srcdir)/iq2000/local.mk $(srcdir)/lm32/local.mk $(srcdir)/m32c/local.mk $(srcdir)/m32r/local.mk $(srcdir)/m68hc11/local.mk $(srcdir)/mn10300/local.mk $(srcdir)/moxie/local.mk $(srcdir)/or1k/local.mk $(srcdir)/ppc/local.mk $(srcdir)/rx/local.mk $(srcdir)/sh/local.mk $(srcdir)/v850/local.mk $(am__configure_deps)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
$(srcdir)/common/local.mk $(srcdir)/igen/local.mk $(srcdir)/testsuite/local.mk $(srcdir)/testsuite/common/local.mk $(srcdir)/arm/local.mk $(srcdir)/bpf/local.mk $(srcdir)/cr16/local.mk $(srcdir)/cris/local.mk $(srcdir)/d10v/local.mk $(srcdir)/erc32/local.mk $(srcdir)/frv/local.mk $(srcdir)/iq2000/local.mk $(srcdir)/lm32/local.mk $(srcdir)/m32c/local.mk $(srcdir)/m32r/local.mk $(srcdir)/m68hc11/local.mk $(srcdir)/mn10300/local.mk $(srcdir)/moxie/local.mk $(srcdir)/or1k/local.mk $(srcdir)/ppc/local.mk $(srcdir)/rx/local.mk $(srcdir)/sh/local.mk $(srcdir)/v850/local.mk $(am__empty):
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
Enable maintainer mode for sim The sim's recently switch to using Automake caused a build failure for me, because I didn't have the correct auto* tools in my path. However, the rule in the tree is that this is not needed in general. This patch adds a call to AM_MAINTAINER_MODE, to align the sim with the way the rest of the tree works here. sim/ChangeLog 2021-03-08 Tom Tromey <tromey@adacore.com> * aclocal.m4, configure, Makefile.in: Rebuild. * configure.ac: Use AM_MAINTAINER_MODE.
2021-03-08 07:48:20 -07:00
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
$(am__cd) $(srcdir) && $(AUTOCONF)
Enable maintainer mode for sim The sim's recently switch to using Automake caused a build failure for me, because I didn't have the correct auto* tools in my path. However, the rule in the tree is that this is not needed in general. This patch adds a call to AM_MAINTAINER_MODE, to align the sim with the way the rest of the tree works here. sim/ChangeLog 2021-03-08 Tom Tromey <tromey@adacore.com> * aclocal.m4, configure, Makefile.in: Rebuild. * configure.ac: Use AM_MAINTAINER_MODE.
2021-03-08 07:48:20 -07:00
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
Make-common.sim: $(top_builddir)/config.status $(top_srcdir)/common/Make-common.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
aarch64/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
aarch64/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/aarch64/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
arm/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
arm/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/arm/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
avr/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
avr/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/avr/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
bfin/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: bfin: merge with common configure script Now that the model logic has been migrated into the runtime, there's nothing specific in the bfin configure code, so merge it into the common one.
2021-06-28 22:11:30 -04:00
bfin/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/bfin/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
cr16/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
cr16/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/cr16/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
cris/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: cris/frv/iq2000/lm32: merge with common configure script Now that the scache logic has been migrated into the common code, there's nothing specific in these configure scripts, so merge them into the common one. The frv unique logic can be moved to a dedicated include and merged in the common configure since the flag has been scoped to the arch.
2021-06-30 13:01:17 -04:00
cris/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/cris/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
d10v/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
d10v/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/d10v/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
frv/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: cris/frv/iq2000/lm32: merge with common configure script Now that the scache logic has been migrated into the common code, there's nothing specific in these configure scripts, so merge them into the common one. The frv unique logic can be moved to a dedicated include and merged in the common configure since the flag has been scoped to the arch.
2021-06-30 13:01:17 -04:00
frv/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/frv/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
ft32/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
ft32/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/ft32/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
h8300/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
h8300/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/h8300/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
iq2000/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: cris/frv/iq2000/lm32: merge with common configure script Now that the scache logic has been migrated into the common code, there's nothing specific in these configure scripts, so merge them into the common one. The frv unique logic can be moved to a dedicated include and merged in the common configure since the flag has been scoped to the arch.
2021-06-30 13:01:17 -04:00
iq2000/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/iq2000/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
lm32/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: cris/frv/iq2000/lm32: merge with common configure script Now that the scache logic has been migrated into the common code, there's nothing specific in these configure scripts, so merge them into the common one. The frv unique logic can be moved to a dedicated include and merged in the common configure since the flag has been scoped to the arch.
2021-06-30 13:01:17 -04:00
lm32/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/lm32/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
m32c/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
m32c/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/m32c/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
m32r/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: m32r: merge with common configure script Now that the traps code has been unified, the configure script has no unique logic in it, so it can be merged into the single common one.
2021-07-01 00:50:17 -04:00
m32r/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/m32r/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
m68hc11/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
m68hc11/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/m68hc11/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
mcore/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
mcore/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/mcore/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
microblaze/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
microblaze/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/microblaze/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
moxie/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
moxie/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/moxie/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
msp430/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
msp430/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/msp430/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
pru/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
pru/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/pru/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
rl78/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
rl78/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/rl78/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
rx/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: rx: merge with common configure script Move the unique configure flag to acinclude.m4 so the common code can include it, then delete the rx configure logic entirely.
2021-06-20 01:04:34 -04:00
rx/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/rx/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
sh/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
sh/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/sh/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
erc32/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: erc32: merge with common configure script Move the unique library tests to the common code so we can delete the erc32 configure logic entirely.
2021-06-26 10:49:32 -04:00
erc32/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/erc32/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir.
2022-02-21 22:35:38 -05:00
example-synacor/.gdbinit: $(top_builddir)/config.status $(top_srcdir)/common/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: drop configure scripts for simple ports These ports only use the pieces that have been unified, so we can merge them into the common configure script and get rid of their unique one entirely. We still compile & link separate run programs, and have dedicated subdir Makefiles, but the configure script portion is merged.
2021-06-19 21:33:30 -04:00
example-synacor/Makefile.sim: $(top_builddir)/config.status $(top_srcdir)/example-synacor/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: create a makefile fragment to pass common settings down As we merge settings from subdirs into the common configure, we sometimes need to keep the settings working in both dirs. Create a makefile fragment to pass them down so we don't have to run the checks twice. For now, the file is empty, but we'll start moving logic in shortly.
2021-06-15 23:01:45 -04:00
arch-subdir.mk: $(top_builddir)/config.status $(srcdir)/arch-subdir.mk.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: gdbinit: hoist setup to common code This was left in subdirs because of the dynamic cgen usage. However, we can move this breakpoint call to runtime and let gdb detect whether the symbol exists.
2022-02-17 00:35:31 -05:00
.gdbinit: $(top_builddir)/config.status $(srcdir)/gdbinit.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
common/$(am__dirstamp):
@$(MKDIR_P) common
@: > common/$(am__dirstamp)
common/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) common/$(DEPDIR)
@: > common/$(DEPDIR)/$(am__dirstamp)
sim: unify callback.o building Now that the use of TARGET_xxx defines have been removed, we can move this to the common logic so we only build it once for multi-targets.
2021-07-06 23:44:38 -04:00
common/common_libcommon_a-callback.$(OBJEXT): common/$(am__dirstamp) \
common/$(DEPDIR)/$(am__dirstamp)
sim: start unifying portability shims There are some functions that gnulib does not yet provide fallbacks for, so start a common file of our own for holding existing stubs.
2021-05-29 16:07:43 -04:00
common/common_libcommon_a-portability.$(OBJEXT): \
common/$(am__dirstamp) common/$(DEPDIR)/$(am__dirstamp)
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common/common_libcommon_a-sim-load.$(OBJEXT): common/$(am__dirstamp) \
common/$(DEPDIR)/$(am__dirstamp)
sim: unify syscall.o building Now that we've unified all the syscall tables, this file does not rely on any port-specific settings, so move it up to building as part of the common step so we only do it once in a multibuild.
2021-11-28 13:23:02 -05:00
common/common_libcommon_a-syscall.$(OBJEXT): common/$(am__dirstamp) \
common/$(DEPDIR)/$(am__dirstamp)
sim: nltvals: pull target errno out into a dedicated source file The current system maintains a list of target errno constants in the nltvals.def file, then runs a build-time tool to turn that into a C file. This list of errno values is the same for all arches, so we don't need the arch-specific flexibility. Further, these are only for newlib/libgloss environments, which makes it confusing to support other userland runtimes (like Linux). Let's simplify to make this easier to understand & build. We don't namespace the variables yet, but sets up the framework for it. Create a new target-newlib-errno.c template file. The template file is hand written, but the inline map is still automatically generated. This allows us to move it to the common set of objects so it's only built once in a multi-target build. Now we can remove the output from the gentmap build-time tool since it's checked into the tree. Then we stop including the errno lists in nltvals.def since nothing uses it.
2021-07-06 22:10:53 -04:00
common/common_libcommon_a-target-newlib-errno.$(OBJEXT): \
common/$(am__dirstamp) common/$(DEPDIR)/$(am__dirstamp)
sim: nltvals: pull target open flags out into a dedicated source file Like we just did for pulling out the errno & signal maps, pull out the open flag map into a dedicated common file. All newlib ports are using the same map which makes it easy.
2021-07-06 23:37:56 -04:00
common/common_libcommon_a-target-newlib-open.$(OBJEXT): \
common/$(am__dirstamp) common/$(DEPDIR)/$(am__dirstamp)
sim: nltvals: pull target signal out into a dedicated source file Like we just did for pulling out the errno map, pull out the signal map into a dedicated common file. All newlib ports are using the same signal map which makes it easy.
2021-07-06 22:43:10 -04:00
common/common_libcommon_a-target-newlib-signal.$(OBJEXT): \
common/$(am__dirstamp) common/$(DEPDIR)/$(am__dirstamp)
sim: nltvals: pull target syscalls out into a dedicated source file Like we just did for pulling out the errno map, pull out the syscall maps into a dedicated common file. Most newlib ports are using the same syscall map, but not all, which means we have to do a bit more work to migrate. This commit adds the maps and switches the ports using the common default syscall table over to it. Ports using unique syscall tables are still using the old targ-map.c logic. Switching common ports over is easy by checking NL_TARGET, but the ppc code needs a bit more cleanup here hence its larger diff.
2021-11-01 01:31:44 -04:00
common/common_libcommon_a-target-newlib-syscall.$(OBJEXT): \
common/$(am__dirstamp) common/$(DEPDIR)/$(am__dirstamp)
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common/common_libcommon_a-version.$(OBJEXT): common/$(am__dirstamp) \
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
common/$(DEPDIR)/$(am__dirstamp)
common/libcommon.a: $(common_libcommon_a_OBJECTS) $(common_libcommon_a_DEPENDENCIES) $(EXTRA_common_libcommon_a_DEPENDENCIES) common/$(am__dirstamp)
$(AM_V_at)-rm -f common/libcommon.a
$(AM_V_AR)$(common_libcommon_a_AR) common/libcommon.a $(common_libcommon_a_OBJECTS) $(common_libcommon_a_LIBADD)
$(AM_V_at)$(RANLIB) common/libcommon.a
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
igen/$(am__dirstamp):
@$(MKDIR_P) igen
@: > igen/$(am__dirstamp)
igen/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) igen/$(DEPDIR)
@: > igen/$(DEPDIR)/$(am__dirstamp)
igen/table.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/lf.$(OBJEXT): igen/$(am__dirstamp) igen/$(DEPDIR)/$(am__dirstamp)
igen/misc.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/filter_host.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/ld-decode.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/ld-cache.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/filter.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/ld-insn.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-model.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-itable.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-icache.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-semantics.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-idecode.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-support.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-engine.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
sim: add support for build-time ar & ranlib This is needed when building for a target whose ar & ranlib are incompatible with the current build system. For example, building for Windows on a Linux system. Then manually import the automake rule for libigen.a, but tweak the tool variables to use the FOR_BUILD variants.
2021-05-01 17:16:23 -04:00
@SIM_ENABLE_IGEN_FALSE@igen/libigen.a: $(igen_libigen_a_OBJECTS) $(igen_libigen_a_DEPENDENCIES) $(EXTRA_igen_libigen_a_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_at)-rm -f igen/libigen.a
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_AR)$(igen_libigen_a_AR) igen/libigen.a $(igen_libigen_a_OBJECTS) $(igen_libigen_a_LIBADD)
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_at)$(RANLIB) igen/libigen.a
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
clean-checkPROGRAMS:
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
echo " rm -f" $$list; \
rm -f $$list || exit $$?; \
test -n "$(EXEEXT)" || exit 0; \
list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
echo " rm -f" $$list; \
rm -f $$list
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
cr16/$(am__dirstamp):
@$(MKDIR_P) cr16
@: > cr16/$(am__dirstamp)
cr16/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) cr16/$(DEPDIR)
@: > cr16/$(DEPDIR)/$(am__dirstamp)
cr16/gencode.$(OBJEXT): cr16/$(am__dirstamp) \
cr16/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_ARCH_cr16_FALSE@cr16/gencode$(EXEEXT): $(cr16_gencode_OBJECTS) $(cr16_gencode_DEPENDENCIES) $(EXTRA_cr16_gencode_DEPENDENCIES) cr16/$(am__dirstamp)
@SIM_ENABLE_ARCH_cr16_FALSE@ @rm -f cr16/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_cr16_FALSE@ $(AM_V_CCLD)$(LINK) $(cr16_gencode_OBJECTS) $(cr16_gencode_LDADD) $(LIBS)
d10v/$(am__dirstamp):
@$(MKDIR_P) d10v
@: > d10v/$(am__dirstamp)
d10v/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) d10v/$(DEPDIR)
@: > d10v/$(DEPDIR)/$(am__dirstamp)
d10v/gencode.$(OBJEXT): d10v/$(am__dirstamp) \
d10v/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_ARCH_d10v_FALSE@d10v/gencode$(EXEEXT): $(d10v_gencode_OBJECTS) $(d10v_gencode_DEPENDENCIES) $(EXTRA_d10v_gencode_DEPENDENCIES) d10v/$(am__dirstamp)
@SIM_ENABLE_ARCH_d10v_FALSE@ @rm -f d10v/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_d10v_FALSE@ $(AM_V_CCLD)$(LINK) $(d10v_gencode_OBJECTS) $(d10v_gencode_LDADD) $(LIBS)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
igen/filter$(EXEEXT): $(igen_filter_OBJECTS) $(igen_filter_DEPENDENCIES) $(EXTRA_igen_filter_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/filter$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_filter_OBJECTS) $(igen_filter_LDADD) $(LIBS)
igen/gen$(EXEEXT): $(igen_gen_OBJECTS) $(igen_gen_DEPENDENCIES) $(EXTRA_igen_gen_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/gen$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_gen_OBJECTS) $(igen_gen_LDADD) $(LIBS)
igen/igen.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_IGEN_FALSE@igen/igen$(EXEEXT): $(igen_igen_OBJECTS) $(igen_igen_DEPENDENCIES) $(EXTRA_igen_igen_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_FALSE@ @rm -f igen/igen$(EXEEXT)
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_CCLD)$(LINK) $(igen_igen_OBJECTS) $(igen_igen_LDADD) $(LIBS)
igen/ld-cache$(EXEEXT): $(igen_ld_cache_OBJECTS) $(igen_ld_cache_DEPENDENCIES) $(EXTRA_igen_ld_cache_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/ld-cache$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_ld_cache_OBJECTS) $(igen_ld_cache_LDADD) $(LIBS)
igen/ld-decode$(EXEEXT): $(igen_ld_decode_OBJECTS) $(igen_ld_decode_DEPENDENCIES) $(EXTRA_igen_ld_decode_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/ld-decode$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_ld_decode_OBJECTS) $(igen_ld_decode_LDADD) $(LIBS)
igen/ld-insn$(EXEEXT): $(igen_ld_insn_OBJECTS) $(igen_ld_insn_DEPENDENCIES) $(EXTRA_igen_ld_insn_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/ld-insn$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_ld_insn_OBJECTS) $(igen_ld_insn_LDADD) $(LIBS)
igen/table$(EXEEXT): $(igen_table_OBJECTS) $(igen_table_DEPENDENCIES) $(EXTRA_igen_table_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/table$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_table_OBJECTS) $(igen_table_LDADD) $(LIBS)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
m32c/$(am__dirstamp):
@$(MKDIR_P) m32c
@: > m32c/$(am__dirstamp)
m32c/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) m32c/$(DEPDIR)
@: > m32c/$(DEPDIR)/$(am__dirstamp)
m32c/opc2c.$(OBJEXT): m32c/$(am__dirstamp) \
m32c/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_ARCH_m32c_FALSE@m32c/opc2c$(EXEEXT): $(m32c_opc2c_OBJECTS) $(m32c_opc2c_DEPENDENCIES) $(EXTRA_m32c_opc2c_DEPENDENCIES) m32c/$(am__dirstamp)
@SIM_ENABLE_ARCH_m32c_FALSE@ @rm -f m32c/opc2c$(EXEEXT)
@SIM_ENABLE_ARCH_m32c_FALSE@ $(AM_V_CCLD)$(LINK) $(m32c_opc2c_OBJECTS) $(m32c_opc2c_LDADD) $(LIBS)
m68hc11/$(am__dirstamp):
@$(MKDIR_P) m68hc11
@: > m68hc11/$(am__dirstamp)
m68hc11/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) m68hc11/$(DEPDIR)
@: > m68hc11/$(DEPDIR)/$(am__dirstamp)
m68hc11/gencode.$(OBJEXT): m68hc11/$(am__dirstamp) \
m68hc11/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_ARCH_m68hc11_FALSE@m68hc11/gencode$(EXEEXT): $(m68hc11_gencode_OBJECTS) $(m68hc11_gencode_DEPENDENCIES) $(EXTRA_m68hc11_gencode_DEPENDENCIES) m68hc11/$(am__dirstamp)
@SIM_ENABLE_ARCH_m68hc11_FALSE@ @rm -f m68hc11/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_m68hc11_FALSE@ $(AM_V_CCLD)$(LINK) $(m68hc11_gencode_OBJECTS) $(m68hc11_gencode_LDADD) $(LIBS)
sh/$(am__dirstamp):
@$(MKDIR_P) sh
@: > sh/$(am__dirstamp)
sh/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) sh/$(DEPDIR)
@: > sh/$(DEPDIR)/$(am__dirstamp)
sh/gencode.$(OBJEXT): sh/$(am__dirstamp) sh/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_ARCH_sh_FALSE@sh/gencode$(EXEEXT): $(sh_gencode_OBJECTS) $(sh_gencode_DEPENDENCIES) $(EXTRA_sh_gencode_DEPENDENCIES) sh/$(am__dirstamp)
@SIM_ENABLE_ARCH_sh_FALSE@ @rm -f sh/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_sh_FALSE@ $(AM_V_CCLD)$(LINK) $(sh_gencode_OBJECTS) $(sh_gencode_LDADD) $(LIBS)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite/common/$(am__dirstamp):
@$(MKDIR_P) testsuite/common
@: > testsuite/common/$(am__dirstamp)
testsuite/common/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) testsuite/common/$(DEPDIR)
@: > testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/alu-tst.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits-gen.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits32m0.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits32m31.$(OBJEXT): \
testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits64m0.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits64m63.$(OBJEXT): \
testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/fpu-tst.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
mostlyclean-compile:
-rm -f *.$(OBJEXT)
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
-rm -f common/*.$(OBJEXT)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -f cr16/*.$(OBJEXT)
-rm -f d10v/*.$(OBJEXT)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
-rm -f igen/*.$(OBJEXT)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -f m32c/*.$(OBJEXT)
-rm -f m68hc11/*.$(OBJEXT)
-rm -f sh/*.$(OBJEXT)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
-rm -f testsuite/common/*.$(OBJEXT)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
distclean-compile:
-rm -f *.tab.c
sim: unify callback.o building Now that the use of TARGET_xxx defines have been removed, we can move this to the common logic so we only build it once for multi-targets.
2021-07-06 23:44:38 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-callback.Po@am__quote@
sim: start unifying portability shims There are some functions that gnulib does not yet provide fallbacks for, so start a common file of our own for holding existing stubs.
2021-05-29 16:07:43 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-portability.Po@am__quote@
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-sim-load.Po@am__quote@
sim: unify syscall.o building Now that we've unified all the syscall tables, this file does not rely on any port-specific settings, so move it up to building as part of the common step so we only do it once in a multibuild.
2021-11-28 13:23:02 -05:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-syscall.Po@am__quote@
sim: nltvals: pull target errno out into a dedicated source file The current system maintains a list of target errno constants in the nltvals.def file, then runs a build-time tool to turn that into a C file. This list of errno values is the same for all arches, so we don't need the arch-specific flexibility. Further, these are only for newlib/libgloss environments, which makes it confusing to support other userland runtimes (like Linux). Let's simplify to make this easier to understand & build. We don't namespace the variables yet, but sets up the framework for it. Create a new target-newlib-errno.c template file. The template file is hand written, but the inline map is still automatically generated. This allows us to move it to the common set of objects so it's only built once in a multi-target build. Now we can remove the output from the gentmap build-time tool since it's checked into the tree. Then we stop including the errno lists in nltvals.def since nothing uses it.
2021-07-06 22:10:53 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-target-newlib-errno.Po@am__quote@
sim: nltvals: pull target open flags out into a dedicated source file Like we just did for pulling out the errno & signal maps, pull out the open flag map into a dedicated common file. All newlib ports are using the same map which makes it easy.
2021-07-06 23:37:56 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-target-newlib-open.Po@am__quote@
sim: nltvals: pull target signal out into a dedicated source file Like we just did for pulling out the errno map, pull out the signal map into a dedicated common file. All newlib ports are using the same signal map which makes it easy.
2021-07-06 22:43:10 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-target-newlib-signal.Po@am__quote@
sim: nltvals: pull target syscalls out into a dedicated source file Like we just did for pulling out the errno map, pull out the syscall maps into a dedicated common file. Most newlib ports are using the same syscall map, but not all, which means we have to do a bit more work to migrate. This commit adds the maps and switches the ports using the common default syscall table over to it. Ports using unique syscall tables are still using the old targ-map.c logic. Switching common ports over is easy by checking NL_TARGET, but the ppc code needs a bit more cleanup here hence its larger diff.
2021-11-01 01:31:44 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-target-newlib-syscall.Po@am__quote@
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-version.Po@am__quote@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@cr16/$(DEPDIR)/gencode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@d10v/$(DEPDIR)/gencode.Po@am__quote@
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/filter.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/filter_host.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-engine.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-icache.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-idecode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-itable.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-model.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-semantics.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-support.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/igen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-cache.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-decode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-insn.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/lf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/misc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/table.Po@am__quote@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
@AMDEP_TRUE@@am__include@ @am__quote@m32c/$(DEPDIR)/opc2c.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@m68hc11/$(DEPDIR)/gencode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@sh/$(DEPDIR)/gencode.Po@am__quote@
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/alu-tst.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits-gen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits32m0.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits32m31.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits64m0.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits64m63.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/fpu-tst.Po@am__quote@
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
.c.lo:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
sim: unify callback.o building Now that the use of TARGET_xxx defines have been removed, we can move this to the common logic so we only build it once for multi-targets.
2021-07-06 23:44:38 -04:00
common/common_libcommon_a-callback.o: common/callback.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-callback.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-callback.Tpo -c -o common/common_libcommon_a-callback.o `test -f 'common/callback.c' || echo '$(srcdir)/'`common/callback.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-callback.Tpo common/$(DEPDIR)/common_libcommon_a-callback.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/callback.c' object='common/common_libcommon_a-callback.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-callback.o `test -f 'common/callback.c' || echo '$(srcdir)/'`common/callback.c
common/common_libcommon_a-callback.obj: common/callback.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-callback.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-callback.Tpo -c -o common/common_libcommon_a-callback.obj `if test -f 'common/callback.c'; then $(CYGPATH_W) 'common/callback.c'; else $(CYGPATH_W) '$(srcdir)/common/callback.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-callback.Tpo common/$(DEPDIR)/common_libcommon_a-callback.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/callback.c' object='common/common_libcommon_a-callback.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-callback.obj `if test -f 'common/callback.c'; then $(CYGPATH_W) 'common/callback.c'; else $(CYGPATH_W) '$(srcdir)/common/callback.c'; fi`
sim: start unifying portability shims There are some functions that gnulib does not yet provide fallbacks for, so start a common file of our own for holding existing stubs.
2021-05-29 16:07:43 -04:00
common/common_libcommon_a-portability.o: common/portability.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-portability.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-portability.Tpo -c -o common/common_libcommon_a-portability.o `test -f 'common/portability.c' || echo '$(srcdir)/'`common/portability.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-portability.Tpo common/$(DEPDIR)/common_libcommon_a-portability.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/portability.c' object='common/common_libcommon_a-portability.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-portability.o `test -f 'common/portability.c' || echo '$(srcdir)/'`common/portability.c
common/common_libcommon_a-portability.obj: common/portability.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-portability.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-portability.Tpo -c -o common/common_libcommon_a-portability.obj `if test -f 'common/portability.c'; then $(CYGPATH_W) 'common/portability.c'; else $(CYGPATH_W) '$(srcdir)/common/portability.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-portability.Tpo common/$(DEPDIR)/common_libcommon_a-portability.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/portability.c' object='common/common_libcommon_a-portability.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-portability.obj `if test -f 'common/portability.c'; then $(CYGPATH_W) 'common/portability.c'; else $(CYGPATH_W) '$(srcdir)/common/portability.c'; fi`
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common/common_libcommon_a-sim-load.o: common/sim-load.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-sim-load.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo -c -o common/common_libcommon_a-sim-load.o `test -f 'common/sim-load.c' || echo '$(srcdir)/'`common/sim-load.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo common/$(DEPDIR)/common_libcommon_a-sim-load.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/sim-load.c' object='common/common_libcommon_a-sim-load.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-sim-load.o `test -f 'common/sim-load.c' || echo '$(srcdir)/'`common/sim-load.c
common/common_libcommon_a-sim-load.obj: common/sim-load.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-sim-load.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo -c -o common/common_libcommon_a-sim-load.obj `if test -f 'common/sim-load.c'; then $(CYGPATH_W) 'common/sim-load.c'; else $(CYGPATH_W) '$(srcdir)/common/sim-load.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo common/$(DEPDIR)/common_libcommon_a-sim-load.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/sim-load.c' object='common/common_libcommon_a-sim-load.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-sim-load.obj `if test -f 'common/sim-load.c'; then $(CYGPATH_W) 'common/sim-load.c'; else $(CYGPATH_W) '$(srcdir)/common/sim-load.c'; fi`
sim: unify syscall.o building Now that we've unified all the syscall tables, this file does not rely on any port-specific settings, so move it up to building as part of the common step so we only do it once in a multibuild.
2021-11-28 13:23:02 -05:00
common/common_libcommon_a-syscall.o: common/syscall.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-syscall.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-syscall.Tpo -c -o common/common_libcommon_a-syscall.o `test -f 'common/syscall.c' || echo '$(srcdir)/'`common/syscall.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-syscall.Tpo common/$(DEPDIR)/common_libcommon_a-syscall.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/syscall.c' object='common/common_libcommon_a-syscall.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-syscall.o `test -f 'common/syscall.c' || echo '$(srcdir)/'`common/syscall.c
common/common_libcommon_a-syscall.obj: common/syscall.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-syscall.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-syscall.Tpo -c -o common/common_libcommon_a-syscall.obj `if test -f 'common/syscall.c'; then $(CYGPATH_W) 'common/syscall.c'; else $(CYGPATH_W) '$(srcdir)/common/syscall.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-syscall.Tpo common/$(DEPDIR)/common_libcommon_a-syscall.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/syscall.c' object='common/common_libcommon_a-syscall.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-syscall.obj `if test -f 'common/syscall.c'; then $(CYGPATH_W) 'common/syscall.c'; else $(CYGPATH_W) '$(srcdir)/common/syscall.c'; fi`
sim: nltvals: pull target errno out into a dedicated source file The current system maintains a list of target errno constants in the nltvals.def file, then runs a build-time tool to turn that into a C file. This list of errno values is the same for all arches, so we don't need the arch-specific flexibility. Further, these are only for newlib/libgloss environments, which makes it confusing to support other userland runtimes (like Linux). Let's simplify to make this easier to understand & build. We don't namespace the variables yet, but sets up the framework for it. Create a new target-newlib-errno.c template file. The template file is hand written, but the inline map is still automatically generated. This allows us to move it to the common set of objects so it's only built once in a multi-target build. Now we can remove the output from the gentmap build-time tool since it's checked into the tree. Then we stop including the errno lists in nltvals.def since nothing uses it.
2021-07-06 22:10:53 -04:00
common/common_libcommon_a-target-newlib-errno.o: common/target-newlib-errno.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-errno.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-errno.Tpo -c -o common/common_libcommon_a-target-newlib-errno.o `test -f 'common/target-newlib-errno.c' || echo '$(srcdir)/'`common/target-newlib-errno.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-errno.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-errno.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-errno.c' object='common/common_libcommon_a-target-newlib-errno.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-errno.o `test -f 'common/target-newlib-errno.c' || echo '$(srcdir)/'`common/target-newlib-errno.c
common/common_libcommon_a-target-newlib-errno.obj: common/target-newlib-errno.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-errno.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-errno.Tpo -c -o common/common_libcommon_a-target-newlib-errno.obj `if test -f 'common/target-newlib-errno.c'; then $(CYGPATH_W) 'common/target-newlib-errno.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-errno.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-errno.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-errno.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-errno.c' object='common/common_libcommon_a-target-newlib-errno.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-errno.obj `if test -f 'common/target-newlib-errno.c'; then $(CYGPATH_W) 'common/target-newlib-errno.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-errno.c'; fi`
sim: nltvals: pull target open flags out into a dedicated source file Like we just did for pulling out the errno & signal maps, pull out the open flag map into a dedicated common file. All newlib ports are using the same map which makes it easy.
2021-07-06 23:37:56 -04:00
common/common_libcommon_a-target-newlib-open.o: common/target-newlib-open.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-open.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-open.Tpo -c -o common/common_libcommon_a-target-newlib-open.o `test -f 'common/target-newlib-open.c' || echo '$(srcdir)/'`common/target-newlib-open.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-open.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-open.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-open.c' object='common/common_libcommon_a-target-newlib-open.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-open.o `test -f 'common/target-newlib-open.c' || echo '$(srcdir)/'`common/target-newlib-open.c
common/common_libcommon_a-target-newlib-open.obj: common/target-newlib-open.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-open.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-open.Tpo -c -o common/common_libcommon_a-target-newlib-open.obj `if test -f 'common/target-newlib-open.c'; then $(CYGPATH_W) 'common/target-newlib-open.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-open.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-open.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-open.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-open.c' object='common/common_libcommon_a-target-newlib-open.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-open.obj `if test -f 'common/target-newlib-open.c'; then $(CYGPATH_W) 'common/target-newlib-open.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-open.c'; fi`
sim: nltvals: pull target signal out into a dedicated source file Like we just did for pulling out the errno map, pull out the signal map into a dedicated common file. All newlib ports are using the same signal map which makes it easy.
2021-07-06 22:43:10 -04:00
common/common_libcommon_a-target-newlib-signal.o: common/target-newlib-signal.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-signal.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-signal.Tpo -c -o common/common_libcommon_a-target-newlib-signal.o `test -f 'common/target-newlib-signal.c' || echo '$(srcdir)/'`common/target-newlib-signal.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-signal.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-signal.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-signal.c' object='common/common_libcommon_a-target-newlib-signal.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-signal.o `test -f 'common/target-newlib-signal.c' || echo '$(srcdir)/'`common/target-newlib-signal.c
common/common_libcommon_a-target-newlib-signal.obj: common/target-newlib-signal.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-signal.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-signal.Tpo -c -o common/common_libcommon_a-target-newlib-signal.obj `if test -f 'common/target-newlib-signal.c'; then $(CYGPATH_W) 'common/target-newlib-signal.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-signal.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-signal.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-signal.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-signal.c' object='common/common_libcommon_a-target-newlib-signal.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-signal.obj `if test -f 'common/target-newlib-signal.c'; then $(CYGPATH_W) 'common/target-newlib-signal.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-signal.c'; fi`
sim: nltvals: pull target syscalls out into a dedicated source file Like we just did for pulling out the errno map, pull out the syscall maps into a dedicated common file. Most newlib ports are using the same syscall map, but not all, which means we have to do a bit more work to migrate. This commit adds the maps and switches the ports using the common default syscall table over to it. Ports using unique syscall tables are still using the old targ-map.c logic. Switching common ports over is easy by checking NL_TARGET, but the ppc code needs a bit more cleanup here hence its larger diff.
2021-11-01 01:31:44 -04:00
common/common_libcommon_a-target-newlib-syscall.o: common/target-newlib-syscall.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-syscall.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-syscall.Tpo -c -o common/common_libcommon_a-target-newlib-syscall.o `test -f 'common/target-newlib-syscall.c' || echo '$(srcdir)/'`common/target-newlib-syscall.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-syscall.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-syscall.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-syscall.c' object='common/common_libcommon_a-target-newlib-syscall.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-syscall.o `test -f 'common/target-newlib-syscall.c' || echo '$(srcdir)/'`common/target-newlib-syscall.c
common/common_libcommon_a-target-newlib-syscall.obj: common/target-newlib-syscall.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-target-newlib-syscall.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-target-newlib-syscall.Tpo -c -o common/common_libcommon_a-target-newlib-syscall.obj `if test -f 'common/target-newlib-syscall.c'; then $(CYGPATH_W) 'common/target-newlib-syscall.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-syscall.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-target-newlib-syscall.Tpo common/$(DEPDIR)/common_libcommon_a-target-newlib-syscall.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/target-newlib-syscall.c' object='common/common_libcommon_a-target-newlib-syscall.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-target-newlib-syscall.obj `if test -f 'common/target-newlib-syscall.c'; then $(CYGPATH_W) 'common/target-newlib-syscall.c'; else $(CYGPATH_W) '$(srcdir)/common/target-newlib-syscall.c'; fi`
sim: unify sim-load.o building Since this file does not rely on any port-specific settings, move it up to building as part of the common step so we only do it once in a multibuild.
2021-06-07 01:48:06 -04:00
common/common_libcommon_a-version.o: common/version.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-version.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-version.Tpo -c -o common/common_libcommon_a-version.o `test -f 'common/version.c' || echo '$(srcdir)/'`common/version.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-version.Tpo common/$(DEPDIR)/common_libcommon_a-version.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/version.c' object='common/common_libcommon_a-version.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-version.o `test -f 'common/version.c' || echo '$(srcdir)/'`common/version.c
common/common_libcommon_a-version.obj: common/version.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-version.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-version.Tpo -c -o common/common_libcommon_a-version.obj `if test -f 'common/version.c'; then $(CYGPATH_W) 'common/version.c'; else $(CYGPATH_W) '$(srcdir)/common/version.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-version.Tpo common/$(DEPDIR)/common_libcommon_a-version.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/version.c' object='common/common_libcommon_a-version.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-version.obj `if test -f 'common/version.c'; then $(CYGPATH_W) 'common/version.c'; else $(CYGPATH_W) '$(srcdir)/common/version.c'; fi`
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -rf cr16/.libs cr16/_libs
-rm -rf d10v/.libs d10v/_libs
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
-rm -rf igen/.libs igen/_libs
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -rf m32c/.libs m32c/_libs
-rm -rf m68hc11/.libs m68hc11/_libs
-rm -rf sh/.libs sh/_libs
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
-rm -rf testsuite/common/.libs testsuite/common/_libs
distclean-libtool:
-rm -f libtool config.lt
sim: install various doc files
2021-11-18 19:32:31 -05:00
install-armdocDATA: $(armdoc_DATA)
@$(NORMAL_INSTALL)
@list='$(armdoc_DATA)'; test -n "$(armdocdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(armdocdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(armdocdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(armdocdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(armdocdir)" || exit $$?; \
done
uninstall-armdocDATA:
@$(NORMAL_UNINSTALL)
@list='$(armdoc_DATA)'; test -n "$(armdocdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(armdocdir)'; $(am__uninstall_files_from_dir)
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
install-dtbDATA: $(dtb_DATA)
@$(NORMAL_INSTALL)
@list='$(dtb_DATA)'; test -n "$(dtbdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dtbdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dtbdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dtbdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dtbdir)" || exit $$?; \
done
uninstall-dtbDATA:
@$(NORMAL_UNINSTALL)
@list='$(dtb_DATA)'; test -n "$(dtbdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(dtbdir)'; $(am__uninstall_files_from_dir)
sim: install various doc files
2021-11-18 19:32:31 -05:00
install-erc32docDATA: $(erc32doc_DATA)
@$(NORMAL_INSTALL)
@list='$(erc32doc_DATA)'; test -n "$(erc32docdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(erc32docdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(erc32docdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(erc32docdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(erc32docdir)" || exit $$?; \
done
uninstall-erc32docDATA:
@$(NORMAL_UNINSTALL)
@list='$(erc32doc_DATA)'; test -n "$(erc32docdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(erc32docdir)'; $(am__uninstall_files_from_dir)
install-frvdocDATA: $(frvdoc_DATA)
@$(NORMAL_INSTALL)
@list='$(frvdoc_DATA)'; test -n "$(frvdocdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(frvdocdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(frvdocdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(frvdocdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(frvdocdir)" || exit $$?; \
done
uninstall-frvdocDATA:
@$(NORMAL_UNINSTALL)
@list='$(frvdoc_DATA)'; test -n "$(frvdocdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(frvdocdir)'; $(am__uninstall_files_from_dir)
install-or1kdocDATA: $(or1kdoc_DATA)
@$(NORMAL_INSTALL)
@list='$(or1kdoc_DATA)'; test -n "$(or1kdocdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(or1kdocdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(or1kdocdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(or1kdocdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(or1kdocdir)" || exit $$?; \
done
uninstall-or1kdocDATA:
@$(NORMAL_UNINSTALL)
@list='$(or1kdoc_DATA)'; test -n "$(or1kdocdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(or1kdocdir)'; $(am__uninstall_files_from_dir)
install-ppcdocDATA: $(ppcdoc_DATA)
@$(NORMAL_INSTALL)
@list='$(ppcdoc_DATA)'; test -n "$(ppcdocdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(ppcdocdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(ppcdocdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(ppcdocdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(ppcdocdir)" || exit $$?; \
done
uninstall-ppcdocDATA:
@$(NORMAL_UNINSTALL)
@list='$(ppcdoc_DATA)'; test -n "$(ppcdocdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(ppcdocdir)'; $(am__uninstall_files_from_dir)
install-rxdocDATA: $(rxdoc_DATA)
@$(NORMAL_INSTALL)
@list='$(rxdoc_DATA)'; test -n "$(rxdocdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(rxdocdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(rxdocdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(rxdocdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(rxdocdir)" || exit $$?; \
done
uninstall-rxdocDATA:
@$(NORMAL_UNINSTALL)
@list='$(rxdoc_DATA)'; test -n "$(rxdocdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(rxdocdir)'; $(am__uninstall_files_from_dir)
sim: install library header files We install libsim.a for people to link against, but haven't been installing the header files to for its API. Export them!
2021-05-14 01:57:06 -04:00
install-pkgincludeHEADERS: $(pkginclude_HEADERS)
@$(NORMAL_INSTALL)
@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
done
uninstall-pkgincludeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG)
@echo 'Making a new site.exp file ...'
@echo '## these variables are automatically generated by make ##' >site.tmp
@echo '# Do not edit here. If you wish to override these values' >>site.tmp
@echo '# edit the last section' >>site.tmp
@echo 'set srcdir "$(srcdir)"' >>site.tmp
@echo "set objdir `pwd`" >>site.tmp
@echo 'set build_alias "$(build_alias)"' >>site.tmp
@echo 'set build_triplet $(build_triplet)' >>site.tmp
@echo 'set host_alias "$(host_alias)"' >>site.tmp
@echo 'set host_triplet $(host_triplet)' >>site.tmp
@echo 'set target_alias "$(target_alias)"' >>site.tmp
@echo 'set target_triplet $(target_triplet)' >>site.tmp
@list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \
echo "## Begin content included from file $$f. Do not modify. ##" \
&& cat `test -f "$$f" || echo '$(srcdir)/'`$$f \
&& echo "## End content included from file $$f. ##" \
|| exit 1; \
done >> site.tmp
@echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp
@if test -f site.exp; then \
sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \
fi
@-rm -f site.bak
@test ! -f site.exp || mv site.exp site.bak
@mv site.tmp site.exp
distclean-DEJAGNU:
-rm -f site.exp site.bak
-l='$(DEJATOOL)'; for tool in $$l; do \
rm -f $$tool.sum $$tool.log; \
done
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
rm -f $< $@
$(MAKE) $(AM_MAKEFLAGS) $<
# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
@$(am__set_TESTS_bases); \
am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
redo_bases=`for i in $$bases; do \
am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
done`; \
if test -n "$$redo_bases"; then \
redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
if $(am__make_dryrun); then :; else \
rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
fi; \
fi; \
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
elif test -n "$$redo_logs"; then \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
st=0; \
errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
for i in $$redo_bases; do \
test -f $$i.trs && test -r $$i.trs \
|| { echo "$$errmsg $$i.trs" >&2; st=1; }; \
test -f $$i.log && test -r $$i.log \
|| { echo "$$errmsg $$i.log" >&2; st=1; }; \
done; \
test $$st -eq 0 || exit 1; \
fi
@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
ws='[ ]'; \
results=`for b in $$bases; do echo $$b.trs; done`; \
test -n "$$results" || results=/dev/null; \
all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
if test `expr $$fail + $$xpass + $$error` -eq 0; then \
success=true; \
else \
success=false; \
fi; \
br='==================='; br=$$br$$br$$br$$br; \
result_count () \
{ \
if test x"$$1" = x"--maybe-color"; then \
maybe_colorize=yes; \
elif test x"$$1" = x"--no-color"; then \
maybe_colorize=no; \
else \
echo "$@: invalid 'result_count' usage" >&2; exit 4; \
fi; \
shift; \
desc=$$1 count=$$2; \
if test $$maybe_colorize = yes && test $$count -gt 0; then \
color_start=$$3 color_end=$$std; \
else \
color_start= color_end=; \
fi; \
echo "$${color_start}# $$desc $$count$${color_end}"; \
}; \
create_testsuite_report () \
{ \
result_count $$1 "TOTAL:" $$all "$$brg"; \
result_count $$1 "PASS: " $$pass "$$grn"; \
result_count $$1 "SKIP: " $$skip "$$blu"; \
result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
result_count $$1 "FAIL: " $$fail "$$red"; \
result_count $$1 "XPASS:" $$xpass "$$red"; \
result_count $$1 "ERROR:" $$error "$$mgn"; \
}; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
for b in $$bases; do echo $$b; done \
| $(am__create_global_log); \
} >$(TEST_SUITE_LOG).tmp || exit 1; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
echo "$${col}$$br$${std}"; \
echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
echo "$${col}$$br$${std}"; \
create_testsuite_report --maybe-color; \
echo "$$col$$br$$std"; \
if $$success; then :; else \
echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
if test -n "$(PACKAGE_BUGREPORT)"; then \
echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
fi; \
echo "$$col$$br$$std"; \
fi; \
$$success || exit 1
check-TESTS:
@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
log_list=`for i in $$bases; do echo $$i.log; done`; \
trs_list=`for i in $$bases; do echo $$i.trs; done`; \
log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
exit $$?;
recheck: all $(check_PROGRAMS)
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
bases=`for i in $$bases; do echo $$i; done \
| $(am__list_recheck_tests)` || exit 1; \
log_list=`for i in $$bases; do echo $$i.log; done`; \
log_list=`echo $$log_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
am__force_recheck=am--force-recheck \
TEST_LOGS="$$log_list"; \
exit $$?
testsuite/common/bits32m0.log: testsuite/common/bits32m0$(EXEEXT)
@p='testsuite/common/bits32m0$(EXEEXT)'; \
b='testsuite/common/bits32m0'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/bits32m31.log: testsuite/common/bits32m31$(EXEEXT)
@p='testsuite/common/bits32m31$(EXEEXT)'; \
b='testsuite/common/bits32m31'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/bits64m0.log: testsuite/common/bits64m0$(EXEEXT)
@p='testsuite/common/bits64m0$(EXEEXT)'; \
b='testsuite/common/bits64m0'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/bits64m63.log: testsuite/common/bits64m63$(EXEEXT)
@p='testsuite/common/bits64m63$(EXEEXT)'; \
b='testsuite/common/bits64m63'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/alu-tst.log: testsuite/common/alu-tst$(EXEEXT)
@p='testsuite/common/alu-tst$(EXEEXT)'; \
b='testsuite/common/alu-tst'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
@p='$<'; \
$(am__set_b); \
$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@ @p='$<'; \
@am__EXEEXT_TRUE@ $(am__set_b); \
@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
check-am: all-am
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU check-TESTS
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
check: check-recursive
sim: install various doc files
2021-11-18 19:32:31 -05:00
all-am: Makefile $(LIBRARIES) $(DATA) $(HEADERS) config.h
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
installdirs: installdirs-recursive
installdirs-am:
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
for dir in "$(DESTDIR)$(armdocdir)" "$(DESTDIR)$(dtbdir)" "$(DESTDIR)$(erc32docdir)" "$(DESTDIR)$(frvdocdir)" "$(DESTDIR)$(or1kdocdir)" "$(DESTDIR)$(ppcdocdir)" "$(DESTDIR)$(rxdocdir)" "$(DESTDIR)$(pkgincludedir)"; do \
sim: install library header files We install libsim.a for people to link against, but haven't been installing the header files to for its API. Export them!
2021-05-14 01:57:06 -04:00
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
clean-generic:
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
-rm -f common/$(DEPDIR)/$(am__dirstamp)
-rm -f common/$(am__dirstamp)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -f cr16/$(DEPDIR)/$(am__dirstamp)
-rm -f cr16/$(am__dirstamp)
-rm -f d10v/$(DEPDIR)/$(am__dirstamp)
-rm -f d10v/$(am__dirstamp)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
-rm -f igen/$(DEPDIR)/$(am__dirstamp)
-rm -f igen/$(am__dirstamp)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -f m32c/$(DEPDIR)/$(am__dirstamp)
-rm -f m32c/$(am__dirstamp)
-rm -f m68hc11/$(DEPDIR)/$(am__dirstamp)
-rm -f m68hc11/$(am__dirstamp)
-rm -f sh/$(DEPDIR)/$(am__dirstamp)
-rm -f sh/$(am__dirstamp)
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
-rm -f testsuite/common/$(DEPDIR)/$(am__dirstamp)
-rm -f testsuite/common/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
clean-noinstLIBRARIES mostlyclean-am
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -rf common/$(DEPDIR) cr16/$(DEPDIR) d10v/$(DEPDIR) igen/$(DEPDIR) m32c/$(DEPDIR) m68hc11/$(DEPDIR) sh/$(DEPDIR) testsuite/common/$(DEPDIR)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
-rm -f Makefile
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
distclean-am: clean-am distclean-DEJAGNU distclean-compile \
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
distclean-generic distclean-hdr distclean-libtool \
distclean-tags
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
dvi: dvi-recursive
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
dvi-am:
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
html: html-recursive
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
html-am:
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
info: info-recursive
info-am:
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
install-data-am: install-armdocDATA install-dtbDATA \
install-erc32docDATA install-frvdocDATA install-or1kdocDATA \
sim: install various doc files
2021-11-18 19:32:31 -05:00
install-pkgincludeHEADERS install-ppcdocDATA install-rxdocDATA
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
-rm -rf common/$(DEPDIR) cr16/$(DEPDIR) d10v/$(DEPDIR) igen/$(DEPDIR) m32c/$(DEPDIR) m68hc11/$(DEPDIR) sh/$(DEPDIR) testsuite/common/$(DEPDIR)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
uninstall-am: uninstall-armdocDATA uninstall-dtbDATA \
uninstall-erc32docDATA uninstall-frvdocDATA \
uninstall-or1kdocDATA uninstall-pkgincludeHEADERS \
uninstall-ppcdocDATA uninstall-rxdocDATA
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
sim: unify platform function & header tests Move the various platform tests up a level to avoid duplication across the ports. When building multiple versions, this speeds things up a bit. For now we move the obvious stuff up a level, but we don't turn own the config.h entirely just yet -- we still have some tests related to libraries that need consideration.
2021-05-17 20:34:52 -04:00
.MAKE: $(am__recursive_targets) all check-am install-am install-strip
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
am--refresh check check-DEJAGNU check-TESTS check-am clean \
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
clean-checkPROGRAMS clean-cscope clean-generic clean-libtool \
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
clean-noinstLIBRARIES cscope cscopelist-am ctags ctags-am \
distclean distclean-DEJAGNU distclean-compile \
sim: unify bfd library dependency testing logic Move these options up to the common dir so we only test & export them once across all ports.
2021-06-18 02:03:44 -04:00
distclean-generic distclean-hdr distclean-libtool \
distclean-tags dvi dvi-am html html-am info info-am install \
sim: install various doc files
2021-11-18 19:32:31 -05:00
install-am install-armdocDATA install-data install-data-am \
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
install-dtbDATA install-dvi install-dvi-am \
install-erc32docDATA install-exec install-exec-am \
install-frvdocDATA install-html install-html-am install-info \
install-info-am install-man install-or1kdocDATA install-pdf \
install-pdf-am install-pkgincludeHEADERS install-ppcdocDATA \
install-ps install-ps-am install-rxdocDATA install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
pdf pdf-am ps ps-am recheck tags tags-am uninstall \
uninstall-am uninstall-armdocDATA uninstall-dtbDATA \
uninstall-erc32docDATA uninstall-frvdocDATA \
uninstall-or1kdocDATA uninstall-pkgincludeHEADERS \
uninstall-ppcdocDATA uninstall-rxdocDATA
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
.PRECIOUS: Makefile
Initial creation of sourceware repository
1999-04-16 01:35:26 +00:00
sim: nltvals: pull target syscalls out into a dedicated source file Like we just did for pulling out the errno map, pull out the syscall maps into a dedicated common file. Most newlib ports are using the same syscall map, but not all, which means we have to do a bit more work to migrate. This commit adds the maps and switches the ports using the common default syscall table over to it. Ports using unique syscall tables are still using the old targ-map.c logic. Switching common ports over is easy by checking NL_TARGET, but the ppc code needs a bit more cleanup here hence its larger diff.
2021-11-01 01:31:44 -04:00
# Generate target constants for newlib/libgloss from its source tree.
sim: common: delete configure & Makefile This was mostly orphaned a while back, but left behind so people could still run `make headers`. Merge that one target to the top sim dir and delete all the build logic. This should avoid confusing people further.
2021-01-17 05:32:12 -05:00
# This file is shipped with distributions so we build in the source dir.
# Use `make nltvals' to rebuild.
.PHONY: nltvals
nltvals:
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
$(srccom)/gennltvals.py --cpp "$(CPP)"
sim: common: delete configure & Makefile This was mostly orphaned a while back, but left behind so people could still run `make headers`. Merge that one target to the top sim dir and delete all the build logic. This should avoid confusing people further.
2021-01-17 05:32:12 -05:00
sim: switch modules.c & version.c to stamp files This fixes remaking of these files and avoids unnecessary rebuilds. Also add both to `make clean` to match other stamp files.
2021-06-14 20:38:52 -04:00
common/version.c: common/version.c-stamp ; @true
common/version.c-stamp: $(srcroot)/gdb/version.in $(srcroot)/bfd/version.h $(srcdir)/common/create-version.sh
sim: enable silent rules in common builds We only do the common code as automake simplifies the logic.
2021-06-14 19:54:04 -04:00
$(AM_V_GEN)$(SHELL) $(srcdir)/common/create-version.sh $(srcroot)/gdb $@.tmp
sim: switch modules.c & version.c to stamp files This fixes remaking of these files and avoids unnecessary rebuilds. Also add both to `make clean` to match other stamp files.
2021-06-14 20:38:52 -04:00
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change $@.tmp $(@:-stamp=)
sim: enable silent rules in common builds We only do the common code as automake simplifies the logic.
2021-06-14 19:54:04 -04:00
$(AM_V_at)touch $@
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
# Alias for developers.
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
@SIM_ENABLE_IGEN_TRUE@igen: $(IGEN)
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
sim: add support for build-time ar & ranlib This is needed when building for a target whose ar & ranlib are incompatible with the current build system. For example, building for Windows on a Linux system. Then manually import the automake rule for libigen.a, but tweak the tool variables to use the FOR_BUILD variants.
2021-05-01 17:16:23 -04:00
# These rules are copied from automake, but tweaked to use FOR_BUILD variables.
@SIM_ENABLE_IGEN_TRUE@igen/libigen.a: $(igen_libigen_a_OBJECTS) $(igen_libigen_a_DEPENDENCIES) $(EXTRA_igen_libigen_a_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_at)-rm -f $@
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_AR)$(AR_FOR_BUILD) $(ARFLAGS) $@ $(igen_libigen_a_OBJECTS) $(igen_libigen_a_LIBADD)
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_at)$(RANLIB_FOR_BUILD) $@
sim: igen: merge build into top level This simplifies the build a bit (especially for deps in port subdirs), and avoids recursive make. This in turn speeds up the build, and sets us up for multi-target.
2021-02-21 23:35:46 -05:00
@SIM_ENABLE_IGEN_TRUE@igen/igen$(EXEEXT): $(igen_igen_OBJECTS) $(igen_igen_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(igen_igen_OBJECTS) $(igen_igen_LDADD)
# igen is a build-time only tool. Override the default rules for it.
@SIM_ENABLE_IGEN_TRUE@igen/%.o: igen/%.c
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
# Build some of the files in standalone mode for developers of igen itself.
@SIM_ENABLE_IGEN_TRUE@igen/%-main.o: igen/%.c
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -DMAIN -c $< -o $@
sim: testsuite: fix objdir handling The tests assume that the cwd is the objdir directory and write its intermediates to there all the time. When using runtest's --objdir setting though, this puts the files in the wrong place. This isn't a big problem currently as we never change --objdir, but in order to support parallel test execution, we're going to start setting that option, so clean up the code ahead of time. We also have to tweak some of the cris tests which were making assumptions about the argv[0] value.
2021-11-21 03:06:20 -05:00
site-sim-config.exp: Makefile
$(AM_V_GEN)( \
sim: testsuite: expand arch specific toolchain settings Leverage the new per-port toolchain settings to initialize the env for eeach set of tests. This allows us to run all the tests in a multitarget build if the user sets up the vars. If they don't, we can still skip all the tests.
2021-11-20 01:56:32 -05:00
echo "set SIM_PRIMARY_TARGET \"$(SIM_PRIMARY_TARGET)\""; \
sim: testsuite: fix objdir handling The tests assume that the cwd is the objdir directory and write its intermediates to there all the time. When using runtest's --objdir setting though, this puts the files in the wrong place. This isn't a big problem currently as we never change --objdir, but in order to support parallel test execution, we're going to start setting that option, so clean up the code ahead of time. We also have to tweak some of the cris tests which were making assumptions about the argv[0] value.
2021-11-21 03:06:20 -05:00
echo "set builddir \"$(builddir)\""; \
echo "set srcdir \"$(srcdir)/testsuite\""; \
sim: testsuite: setup per-port toolchain settings for multitarget build Gas does not support multitarget builds -- it still only supports a single input & output format. ld is a bit better, but requires manual flags to select the right output. This makes it impossible to run the complete testsuite in a multitarget build. To address this limitation, create a suite of FOR_TARGET variables so these can be set to precompiled as & ld programs. It requires a bit of setup ahead of time, but it's a one-time cost, and makes running the full testsuite at once much easier.
2021-06-23 23:23:27 -04:00
$(foreach V,$(SIM_TOOLCHAIN_VARS),echo "set $(V) \"$($(V))\"";) \
sim: testsuite: fix objdir handling The tests assume that the cwd is the objdir directory and write its intermediates to there all the time. When using runtest's --objdir setting though, this puts the files in the wrong place. This isn't a big problem currently as we never change --objdir, but in order to support parallel test execution, we're going to start setting that option, so clean up the code ahead of time. We also have to tweak some of the cris tests which were making assumptions about the argv[0] value.
2021-11-21 03:06:20 -05:00
) > $@
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
# Ignore dirs that only contain configuration settings.
check/./config/%.exp: ; @true
sim: testsuite: update ignored .exp files [PR sim/29596] Now that we run `check/foo.exp` instead of `check/./foo.exp`, update the config/ & lib/ exceptions to cover both paths. Bug: https://sourceware.org/PR29596
2022-10-24 01:28:15 +05:45
check/config/%.exp: ; @true
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
check/./lib/%.exp: ; @true
sim: testsuite: update ignored .exp files [PR sim/29596] Now that we run `check/foo.exp` instead of `check/./foo.exp`, update the config/ & lib/ exceptions to cover both paths. Bug: https://sourceware.org/PR29596
2022-10-24 01:28:15 +05:45
check/lib/%.exp: ; @true
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
check/%.exp:
$(AM_V_at)mkdir -p testsuite/$*
$(AM_V_RUNTEST)$(DO_RUNTEST) --objdir testsuite/$* --outdir testsuite/$* $*.exp
check-DEJAGNU-parallel:
$(AM_V_at)( \
$(MAKE) -k \
sim: testsuite: tweak parallel find invocation [PR sim/29596] Make sure we invoke runtest with the same exp filenames when running in parallel as it will find when run single threaded. When `runtest` finds files itself, it will use paths like "aarch64/allinsn.exp". When we run `find .` with the %p option, it produces "./aarch64/allinsn.exp". Switch to %P to get "aarch64/allinsn.exp". Bug: https://sourceware.org/PR29596
2022-10-24 00:56:46 +05:45
`cd $(srcdir)/testsuite && find . -name '*.exp' -printf 'check/%P '`; \
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
ret=$$?; \
$(SHELL) $(srcroot)/contrib/dg-extract-results.sh \
`find testsuite/ -maxdepth 4 -name testrun.sum | sort` > testrun.sum; \
$(SHELL) $(srcroot)/contrib/dg-extract-results.sh -L \
`find testsuite/ -maxdepth 4 -name testrun.log | sort` > testrun.log; \
echo; \
$(SED) -n '/^.*===.*Summary.*===/,$$p' testrun.sum; \
exit $$ret)
check-DEJAGNU-single:
$(AM_V_RUNTEST)$(DO_RUNTEST)
# If running a single job, invoking runtest once is faster & has nicer output.
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
check-DEJAGNU: site.exp
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
$(AM_V_at)(set -e; \
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
EXPECT=${EXPECT} ; export EXPECT ; \
runtest=$(RUNTEST); \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though.
2021-11-26 00:04:31 -05:00
case "$(MAKEFLAGS)" in \
*-j*) $(MAKE) check-DEJAGNU-parallel;; \
*) $(MAKE) check-DEJAGNU-single;; \
esac; \
else \
echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi)
sim: testsuite: merge into toplevel automake This allows us to delete most of our custom test logic, and avoids a recursive make for minor speed up.
2021-01-17 11:13:37 -05:00
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
# These tests are build-time only tools. Override the default rules for them.
testsuite/common/%.o: testsuite/common/%.c
$(AM_V_CC)$(COMPILE_FOR_BUILD) $(testsuite_common_CPPFLAGS) -c $< -o $@
testsuite/common/alu-tst$(EXEEXT): $(testsuite_common_alu_tst_OBJECTS) $(testsuite_common_alu_tst_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_alu_tst_OBJECTS) $(testsuite_common_alu_tst_LDADD)
testsuite/common/fpu-tst$(EXEEXT): $(testsuite_common_fpu_tst_OBJECTS) $(testsuite_common_fpu_tst_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_fpu_tst_OBJECTS) $(testsuite_common_fpu_tst_LDADD)
testsuite/common/bits-gen$(EXEEXT): $(testsuite_common_bits_gen_OBJECTS) $(testsuite_common_bits_gen_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits_gen_OBJECTS) $(testsuite_common_bits_gen_LDADD)
testsuite/common/bits32m0$(EXEEXT): $(testsuite_common_bits32m0_OBJECTS) $(testsuite_common_bits32m0_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits32m0_OBJECTS) $(testsuite_common_bits32m0_LDADD)
sim: testsuite: fix bits-gen EXEEXT handling Add missing $(EXEEXT) to dependencies on bits-gen. These are actually build-only tools, but automake doesn't allow for build & host tools, so the rules are re-using EXEEXT.
2021-11-26 20:41:44 -05:00
testsuite/common/bits32m0.c: testsuite/common/bits-gen$(EXEEXT) testsuite/common/bits-tst.c
sim: enable silent rules in common builds We only do the common code as automake simplifies the logic.
2021-06-14 19:54:04 -04:00
$(AM_V_GEN)$< 32 0 big > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite/common/bits32m31$(EXEEXT): $(testsuite_common_bits32m31_OBJECTS) $(testsuite_common_bits32m31_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits32m31_OBJECTS) $(testsuite_common_bits32m31_LDADD)
sim: testsuite: fix bits-gen EXEEXT handling Add missing $(EXEEXT) to dependencies on bits-gen. These are actually build-only tools, but automake doesn't allow for build & host tools, so the rules are re-using EXEEXT.
2021-11-26 20:41:44 -05:00
testsuite/common/bits32m31.c: testsuite/common/bits-gen$(EXEEXT) testsuite/common/bits-tst.c
sim: enable silent rules in common builds We only do the common code as automake simplifies the logic.
2021-06-14 19:54:04 -04:00
$(AM_V_GEN)$< 32 31 little > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite/common/bits64m0$(EXEEXT): $(testsuite_common_bits64m0_OBJECTS) $(testsuite_common_bits64m0_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits64m0_OBJECTS) $(testsuite_common_bits64m0_LDADD)
sim: testsuite: fix bits-gen EXEEXT handling Add missing $(EXEEXT) to dependencies on bits-gen. These are actually build-only tools, but automake doesn't allow for build & host tools, so the rules are re-using EXEEXT.
2021-11-26 20:41:44 -05:00
testsuite/common/bits64m0.c: testsuite/common/bits-gen$(EXEEXT) testsuite/common/bits-tst.c
sim: enable silent rules in common builds We only do the common code as automake simplifies the logic.
2021-06-14 19:54:04 -04:00
$(AM_V_GEN)$< 64 0 big > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
testsuite/common/bits64m63$(EXEEXT): $(testsuite_common_bits64m63_OBJECTS) $(testsuite_common_bits64m63_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits64m63_OBJECTS) $(testsuite_common_bits64m63_LDADD)
sim: testsuite: fix bits-gen EXEEXT handling Add missing $(EXEEXT) to dependencies on bits-gen. These are actually build-only tools, but automake doesn't allow for build & host tools, so the rules are re-using EXEEXT.
2021-11-26 20:41:44 -05:00
testsuite/common/bits64m63.c: testsuite/common/bits-gen$(EXEEXT) testsuite/common/bits-tst.c
sim: enable silent rules in common builds We only do the common code as automake simplifies the logic.
2021-06-14 19:54:04 -04:00
$(AM_V_GEN)$< 64 63 little > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
sim: testsuite: integrate common tests into build Now that we have the common automake build with support for build-time programs working, we can integrate the common tests into the default `make check` flow.
2021-03-13 20:54:49 -05:00
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_bpf_TRUE@bpf/mloop-le.c bpf/eng-le.h: bpf/stamp-mloop-le ; @true
@SIM_ENABLE_ARCH_bpf_TRUE@bpf/stamp-mloop-le: $(srccom)/genmloop.sh bpf/mloop.in
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_bpf_TRUE@ -mono -scache -prefix bpfbf_ebpfle -cpu bpfbf \
@SIM_ENABLE_ARCH_bpf_TRUE@ -infile $(srcdir)/bpf/mloop.in \
@SIM_ENABLE_ARCH_bpf_TRUE@ -outfile-prefix bpf/ -outfile-suffix -le
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change bpf/eng-le.hin bpf/eng-le.h
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change bpf/mloop-le.cin bpf/mloop-le.c
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_at)touch $@
@SIM_ENABLE_ARCH_bpf_TRUE@bpf/mloop-be.c bpf/eng-be.h: bpf/stamp-mloop-be ; @true
@SIM_ENABLE_ARCH_bpf_TRUE@bpf/stamp-mloop-be: $(srccom)/genmloop.sh bpf/mloop.in
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_bpf_TRUE@ -mono -scache -prefix bpfbf_ebpfbe -cpu bpfbf \
@SIM_ENABLE_ARCH_bpf_TRUE@ -infile $(srcdir)/bpf/mloop.in \
@SIM_ENABLE_ARCH_bpf_TRUE@ -outfile-prefix bpf/ -outfile-suffix -be
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change bpf/eng-be.hin bpf/eng-be.h
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change bpf/mloop-be.cin bpf/mloop-be.c
@SIM_ENABLE_ARCH_bpf_TRUE@ $(AM_V_at)touch $@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
# These rules are copied from automake, but tweaked to use FOR_BUILD variables.
@SIM_ENABLE_ARCH_cr16_TRUE@cr16/gencode$(EXEEXT): $(cr16_gencode_OBJECTS) $(cr16_gencode_DEPENDENCIES) cr16/$(am__dirstamp)
@SIM_ENABLE_ARCH_cr16_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(cr16_gencode_OBJECTS) $(cr16_gencode_LDADD)
# gencode is a build-time only tool. Override the default rules for it.
@SIM_ENABLE_ARCH_cr16_TRUE@cr16/gencode.o: cr16/gencode.c
@SIM_ENABLE_ARCH_cr16_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
@SIM_ENABLE_ARCH_cr16_TRUE@cr16/cr16-opc.o: ../opcodes/cr16-opc.c
@SIM_ENABLE_ARCH_cr16_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
@SIM_ENABLE_ARCH_cr16_TRUE@cr16/simops.h: cr16/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_cr16_TRUE@ $(AM_V_GEN)$< -h >$@
@SIM_ENABLE_ARCH_cr16_TRUE@cr16/table.c: cr16/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_cr16_TRUE@ $(AM_V_GEN)$< >$@
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_cris_TRUE@cris/mloopv10f.c cris/engv10.h: cris/stamp-mloop-v10f ; @true
@SIM_ENABLE_ARCH_cris_TRUE@cris/stamp-mloop-v10f: $(srccom)/genmloop.sh cris/mloop.in
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_cris_TRUE@ -mono -no-fast -pbb -switch semcrisv10f-switch.c \
@SIM_ENABLE_ARCH_cris_TRUE@ -cpu crisv10f \
@SIM_ENABLE_ARCH_cris_TRUE@ -infile $(srcdir)/cris/mloop.in -outfile-prefix cris/ -outfile-suffix -v10f
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change cris/eng-v10f.hin cris/engv10.h
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change cris/mloop-v10f.cin cris/mloopv10f.c
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_at)touch $@
@SIM_ENABLE_ARCH_cris_TRUE@cris/mloopv32f.c cris/engv32.h: cris/stamp-mloop-v32f ; @true
@SIM_ENABLE_ARCH_cris_TRUE@cris/stamp-mloop-v32f: $(srccom)/genmloop.sh cris/mloop.in
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_cris_TRUE@ -mono -no-fast -pbb -switch semcrisv32f-switch.c \
@SIM_ENABLE_ARCH_cris_TRUE@ -cpu crisv32f \
@SIM_ENABLE_ARCH_cris_TRUE@ -infile $(srcdir)/cris/mloop.in -outfile-prefix cris/ -outfile-suffix -v32f
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change cris/eng-v32f.hin cris/engv32.h
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change cris/mloop-v32f.cin cris/mloopv32f.c
@SIM_ENABLE_ARCH_cris_TRUE@ $(AM_V_at)touch $@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
# These rules are copied from automake, but tweaked to use FOR_BUILD variables.
@SIM_ENABLE_ARCH_d10v_TRUE@d10v/gencode$(EXEEXT): $(d10v_gencode_OBJECTS) $(d10v_gencode_DEPENDENCIES) d10v/$(am__dirstamp)
@SIM_ENABLE_ARCH_d10v_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(d10v_gencode_OBJECTS) $(d10v_gencode_LDADD)
# gencode is a build-time only tool. Override the default rules for it.
@SIM_ENABLE_ARCH_d10v_TRUE@d10v/gencode.o: d10v/gencode.c
@SIM_ENABLE_ARCH_d10v_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
@SIM_ENABLE_ARCH_d10v_TRUE@d10v/d10v-opc.o: ../opcodes/d10v-opc.c
@SIM_ENABLE_ARCH_d10v_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
@SIM_ENABLE_ARCH_d10v_TRUE@d10v/simops.h: d10v/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_d10v_TRUE@ $(AM_V_GEN)$< -h >$@
@SIM_ENABLE_ARCH_d10v_TRUE@d10v/table.c: d10v/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_d10v_TRUE@ $(AM_V_GEN)$< >$@
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_frv_TRUE@frv/mloop.c frv/eng.h: frv/stamp-mloop ; @true
@SIM_ENABLE_ARCH_frv_TRUE@frv/stamp-mloop: $(srccom)/genmloop.sh frv/mloop.in
@SIM_ENABLE_ARCH_frv_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_frv_TRUE@ -mono -scache -parallel-generic-write -parallel-only \
@SIM_ENABLE_ARCH_frv_TRUE@ -cpu frvbf \
@SIM_ENABLE_ARCH_frv_TRUE@ -infile $(srcdir)/frv/mloop.in -outfile-prefix frv/
@SIM_ENABLE_ARCH_frv_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change frv/eng.hin frv/eng.h
@SIM_ENABLE_ARCH_frv_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change frv/mloop.cin frv/mloop.c
@SIM_ENABLE_ARCH_frv_TRUE@ $(AM_V_at)touch $@
@SIM_ENABLE_ARCH_iq2000_TRUE@iq2000/mloop.c iq2000/eng.h: iq2000/stamp-mloop ; @true
@SIM_ENABLE_ARCH_iq2000_TRUE@iq2000/stamp-mloop: $(srccom)/genmloop.sh iq2000/mloop.in
@SIM_ENABLE_ARCH_iq2000_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_iq2000_TRUE@ -mono -fast -pbb -switch sem-switch.c \
@SIM_ENABLE_ARCH_iq2000_TRUE@ -cpu iq2000bf \
@SIM_ENABLE_ARCH_iq2000_TRUE@ -infile $(srcdir)/iq2000/mloop.in -outfile-prefix iq2000/
@SIM_ENABLE_ARCH_iq2000_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change iq2000/eng.hin iq2000/eng.h
@SIM_ENABLE_ARCH_iq2000_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change iq2000/mloop.cin iq2000/mloop.c
@SIM_ENABLE_ARCH_iq2000_TRUE@ $(AM_V_at)touch $@
@SIM_ENABLE_ARCH_lm32_TRUE@lm32/mloop.c lm32/eng.h: lm32/stamp-mloop ; @true
@SIM_ENABLE_ARCH_lm32_TRUE@lm32/stamp-mloop: $(srccom)/genmloop.sh lm32/mloop.in
@SIM_ENABLE_ARCH_lm32_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_lm32_TRUE@ -mono -fast -pbb -switch sem-switch.c \
@SIM_ENABLE_ARCH_lm32_TRUE@ -cpu lm32bf \
@SIM_ENABLE_ARCH_lm32_TRUE@ -infile $(srcdir)/lm32/mloop.in -outfile-prefix lm32/
@SIM_ENABLE_ARCH_lm32_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change lm32/eng.hin lm32/eng.h
@SIM_ENABLE_ARCH_lm32_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change lm32/mloop.cin lm32/mloop.c
@SIM_ENABLE_ARCH_lm32_TRUE@ $(AM_V_at)touch $@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
# These rules are copied from automake, but tweaked to use FOR_BUILD variables.
@SIM_ENABLE_ARCH_m32c_TRUE@m32c/opc2c$(EXEEXT): $(m32c_opc2c_OBJECTS) $(m32c_opc2c_DEPENDENCIES) m32c/$(am__dirstamp)
@SIM_ENABLE_ARCH_m32c_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(m32c_opc2c_OBJECTS) $(m32c_opc2c_LDADD)
# opc2c is a build-time only tool. Override the default rules for it.
@SIM_ENABLE_ARCH_m32c_TRUE@m32c/opc2c.o: m32c/opc2c.c
@SIM_ENABLE_ARCH_m32c_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
@SIM_ENABLE_ARCH_m32c_TRUE@m32c/m32c.c: m32c/m32c.opc m32c/opc2c$(EXEEXT)
@SIM_ENABLE_ARCH_m32c_TRUE@ $(AM_V_GEN)$(m32c_OPC2C_RUN) -l $@.log $< > $@.tmp
@SIM_ENABLE_ARCH_m32c_TRUE@ $(AM_V_at)mv $@.tmp $@
@SIM_ENABLE_ARCH_m32c_TRUE@m32c/r8c.c: m32c/r8c.opc m32c/opc2c$(EXEEXT)
@SIM_ENABLE_ARCH_m32c_TRUE@ $(AM_V_GEN)$(m32c_OPC2C_RUN) -l $@.log $< > $@.tmp
@SIM_ENABLE_ARCH_m32c_TRUE@ $(AM_V_at)mv $@.tmp $@
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_m32r_TRUE@m32r/mloop.c m32r/eng.h: m32r/stamp-mloop ; @true
@SIM_ENABLE_ARCH_m32r_TRUE@m32r/stamp-mloop: $(srccom)/genmloop.sh m32r/mloop.in
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_m32r_TRUE@ -mono -fast -pbb -switch sem-switch.c \
@SIM_ENABLE_ARCH_m32r_TRUE@ -cpu m32rbf \
@SIM_ENABLE_ARCH_m32r_TRUE@ -infile $(srcdir)/m32r/mloop.in -outfile-prefix m32r/
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change m32r/eng.hin m32r/eng.h
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change m32r/mloop.cin m32r/mloop.c
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)touch $@
@SIM_ENABLE_ARCH_m32r_TRUE@m32r/mloopx.c m32r/engx.h: m32r/stamp-mloop ; @true
@SIM_ENABLE_ARCH_m32r_TRUE@m32r/stamp-mloop-x: $(srccom)/genmloop.sh m32r/mloop.in
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_m32r_TRUE@ -mono -no-fast -pbb -parallel-write -switch semx-switch.c \
@SIM_ENABLE_ARCH_m32r_TRUE@ -cpu m32rxf \
@SIM_ENABLE_ARCH_m32r_TRUE@ -infile $(srcdir)/m32r/mloopx.in -outfile-prefix m32r/ -outfile-suffix x
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change m32r/engx.hin m32r/engx.h
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change m32r/mloopx.cin m32r/mloopx.c
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)touch $@
@SIM_ENABLE_ARCH_m32r_TRUE@m32r/mloop2.c m32r/eng2.h: m32r/stamp-mloop ; @true
@SIM_ENABLE_ARCH_m32r_TRUE@m32r/stamp-mloop-2: $(srccom)/genmloop.sh m32r/mloop.in
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_m32r_TRUE@ -mono -no-fast -pbb -parallel-write -switch sem2-switch.c \
@SIM_ENABLE_ARCH_m32r_TRUE@ -cpu m32r2f \
@SIM_ENABLE_ARCH_m32r_TRUE@ -infile $(srcdir)/m32r/mloop2.in -outfile-prefix m32r/ -outfile-suffix 2
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change m32r/eng2.hin m32r/eng2.h
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change m32r/mloop2.cin m32r/mloop2.c
@SIM_ENABLE_ARCH_m32r_TRUE@ $(AM_V_at)touch $@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
# These rules are copied from automake, but tweaked to use FOR_BUILD variables.
@SIM_ENABLE_ARCH_m68hc11_TRUE@m68hc11/gencode$(EXEEXT): $(m68hc11_gencode_OBJECTS) $(m68hc11_gencode_DEPENDENCIES) m68hc11/$(am__dirstamp)
@SIM_ENABLE_ARCH_m68hc11_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(m68hc11_gencode_OBJECTS) $(m68hc11_gencode_LDADD)
# gencode is a build-time only tool. Override the default rules for it.
@SIM_ENABLE_ARCH_m68hc11_TRUE@m68hc11/gencode.o: m68hc11/gencode.c
@SIM_ENABLE_ARCH_m68hc11_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
@SIM_ENABLE_ARCH_m68hc11_TRUE@m68hc11/m68hc11int.c: m68hc11/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_m68hc11_TRUE@ $(AM_V_GEN)$< -m6811 >$@
@SIM_ENABLE_ARCH_m68hc11_TRUE@m68hc11/m68hc12int.c: m68hc11/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_m68hc11_TRUE@ $(AM_V_GEN)$< -m6812 >$@
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
@SIM_ENABLE_ARCH_mn10300_TRUE@$(mn10300_BUILT_SRC_FROM_IGEN): mn10300/stamp-igen
@SIM_ENABLE_ARCH_mn10300_TRUE@mn10300/stamp-igen: $(mn10300_IGEN_INSN) $(mn10300_IGEN_INSN_INC) $(mn10300_IGEN_DC) $(IGEN)
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_GEN)$(IGEN_RUN) \
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(mn10300_IGEN_TRACE) \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -G gen-direct-access \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -M mn10300,am33 -G gen-multi-sim=am33 \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -M am33_2 \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -I $(srcdir)/mn10300 \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -i $(mn10300_IGEN_INSN) \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -o $(mn10300_IGEN_DC) \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -x \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n icache.h -hc mn10300/tmp-icache.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n icache.c -c mn10300/tmp-icache.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n semantics.h -hs mn10300/tmp-semantics.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n semantics.c -s mn10300/tmp-semantics.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n idecode.h -hd mn10300/tmp-idecode.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n idecode.c -d mn10300/tmp-idecode.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n model.h -hm mn10300/tmp-model.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n model.c -m mn10300/tmp-model.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n support.h -hf mn10300/tmp-support.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n support.c -f mn10300/tmp-support.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n itable.h -ht mn10300/tmp-itable.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n itable.c -t mn10300/tmp-itable.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n engine.h -he mn10300/tmp-engine.h \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n engine.c -e mn10300/tmp-engine.c \
@SIM_ENABLE_ARCH_mn10300_TRUE@ -n irun.c -r mn10300/tmp-irun.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-icache.h mn10300/icache.h
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-icache.c mn10300/icache.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-idecode.h mn10300/idecode.h
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-idecode.c mn10300/idecode.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-semantics.h mn10300/semantics.h
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-semantics.c mn10300/semantics.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-model.h mn10300/model.h
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-model.c mn10300/model.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-support.h mn10300/support.h
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-support.c mn10300/support.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-itable.h mn10300/itable.h
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-itable.c mn10300/itable.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-engine.h mn10300/engine.h
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-engine.c mn10300/engine.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change mn10300/tmp-irun.c mn10300/irun.c
@SIM_ENABLE_ARCH_mn10300_TRUE@ $(AM_V_at)touch $@
sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-12-04 13:35:25 -05:00
@SIM_ENABLE_ARCH_moxie_TRUE@moxie/moxie-gdb.dtb: @MAINT@ moxie/moxie-gdb.dts moxie/$(am__dirstamp)
@SIM_ENABLE_ARCH_moxie_TRUE@ $(AM_V_GEN) \
@SIM_ENABLE_ARCH_moxie_TRUE@ if test "x$(DTC)" != x; then \
@SIM_ENABLE_ARCH_moxie_TRUE@ $(DTC) -O dtb -o $@.tmp ${srcdir}/moxie/moxie-gdb.dts || exit 1; \
@SIM_ENABLE_ARCH_moxie_TRUE@ $(SHELL) $(srcroot)/move-if-change $@.tmp ${srcdir}/moxie/moxie-gdb.dtb || exit 1; \
@SIM_ENABLE_ARCH_moxie_TRUE@ touch ${srcdir}/moxie/moxie-gdb.dtb; \
@SIM_ENABLE_ARCH_moxie_TRUE@ else \
@SIM_ENABLE_ARCH_moxie_TRUE@ echo "Could not update the moxie-gdb.dtb file because the device "; \
@SIM_ENABLE_ARCH_moxie_TRUE@ echo "tree compiler tool (dtc) is missing. Install the tool to "; \
@SIM_ENABLE_ARCH_moxie_TRUE@ echo "update the device tree blob."; \
@SIM_ENABLE_ARCH_moxie_TRUE@ fi
sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled).
2022-10-09 03:57:12 +00:00
# Rule to create the .dirstamp file (on which moxie-gdb.dtb depends)
# as automake fails to automatically create this rule for _DATA items.
@SIM_ENABLE_ARCH_moxie_TRUE@moxie/$(am__dirstamp):
@SIM_ENABLE_ARCH_moxie_TRUE@ @$(MKDIR_P) moxie
@SIM_ENABLE_ARCH_moxie_TRUE@ @: >moxie/$(am__dirstamp)
sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized.
2021-10-31 03:29:36 -04:00
@SIM_ENABLE_ARCH_or1k_TRUE@or1k/mloop.c or1k/eng.h: or1k/stamp-mloop ; @true
@SIM_ENABLE_ARCH_or1k_TRUE@or1k/stamp-mloop: $(srccom)/genmloop.sh or1k/mloop.in
@SIM_ENABLE_ARCH_or1k_TRUE@ $(AM_V_GEN)$(SHELL) $(srccom)/genmloop.sh -shell $(SHELL) \
@SIM_ENABLE_ARCH_or1k_TRUE@ -mono -fast -pbb -switch sem-switch.c \
@SIM_ENABLE_ARCH_or1k_TRUE@ -cpu or1k32bf \
@SIM_ENABLE_ARCH_or1k_TRUE@ -infile $(srcdir)/or1k/mloop.in -outfile-prefix or1k/
@SIM_ENABLE_ARCH_or1k_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change or1k/eng.hin or1k/eng.h
@SIM_ENABLE_ARCH_or1k_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change or1k/mloop.cin or1k/mloop.c
@SIM_ENABLE_ARCH_or1k_TRUE@ $(AM_V_at)touch $@
sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization.
2021-10-31 02:08:38 -04:00
# These rules are copied from automake, but tweaked to use FOR_BUILD variables.
@SIM_ENABLE_ARCH_sh_TRUE@sh/gencode$(EXEEXT): $(sh_gencode_OBJECTS) $(sh_gencode_DEPENDENCIES) sh/$(am__dirstamp)
@SIM_ENABLE_ARCH_sh_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(sh_gencode_OBJECTS) $(sh_gencode_LDADD)
# gencode is a build-time only tool. Override the default rules for it.
@SIM_ENABLE_ARCH_sh_TRUE@sh/gencode.o: sh/gencode.c
@SIM_ENABLE_ARCH_sh_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
@SIM_ENABLE_ARCH_sh_TRUE@sh/code.c: sh/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_sh_TRUE@ $(AM_V_GEN)$< -x >$@
@SIM_ENABLE_ARCH_sh_TRUE@sh/ppi.c: sh/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_sh_TRUE@ $(AM_V_GEN)$< -p >$@
@SIM_ENABLE_ARCH_sh_TRUE@sh/table.c: sh/gencode$(EXEEXT)
@SIM_ENABLE_ARCH_sh_TRUE@ $(AM_V_GEN)$< -s >$@
sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first.
2021-10-31 02:47:13 -04:00
@SIM_ENABLE_ARCH_v850_TRUE@$(v850_BUILT_SRC_FROM_IGEN): v850/stamp-igen
@SIM_ENABLE_ARCH_v850_TRUE@v850/stamp-igen: $(v850_IGEN_INSN) $(v850_IGEN_DC) $(IGEN)
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_GEN)$(IGEN_RUN) \
@SIM_ENABLE_ARCH_v850_TRUE@ $(v850_IGEN_TRACE) \
@SIM_ENABLE_ARCH_v850_TRUE@ -G gen-direct-access \
@SIM_ENABLE_ARCH_v850_TRUE@ -G gen-zero-r0 \
@SIM_ENABLE_ARCH_v850_TRUE@ -i $(v850_IGEN_INSN) \
@SIM_ENABLE_ARCH_v850_TRUE@ -o $(v850_IGEN_DC) \
@SIM_ENABLE_ARCH_v850_TRUE@ -x \
@SIM_ENABLE_ARCH_v850_TRUE@ -n icache.h -hc v850/tmp-icache.h \
@SIM_ENABLE_ARCH_v850_TRUE@ -n icache.c -c v850/tmp-icache.c \
@SIM_ENABLE_ARCH_v850_TRUE@ -n semantics.h -hs v850/tmp-semantics.h \
@SIM_ENABLE_ARCH_v850_TRUE@ -n semantics.c -s v850/tmp-semantics.c \
@SIM_ENABLE_ARCH_v850_TRUE@ -n idecode.h -hd v850/tmp-idecode.h \
@SIM_ENABLE_ARCH_v850_TRUE@ -n idecode.c -d v850/tmp-idecode.c \
@SIM_ENABLE_ARCH_v850_TRUE@ -n model.h -hm v850/tmp-model.h \
@SIM_ENABLE_ARCH_v850_TRUE@ -n model.c -m v850/tmp-model.c \
@SIM_ENABLE_ARCH_v850_TRUE@ -n support.h -hf v850/tmp-support.h \
@SIM_ENABLE_ARCH_v850_TRUE@ -n support.c -f v850/tmp-support.c \
@SIM_ENABLE_ARCH_v850_TRUE@ -n itable.h -ht v850/tmp-itable.h \
@SIM_ENABLE_ARCH_v850_TRUE@ -n itable.c -t v850/tmp-itable.c \
@SIM_ENABLE_ARCH_v850_TRUE@ -n engine.h -he v850/tmp-engine.h \
@SIM_ENABLE_ARCH_v850_TRUE@ -n engine.c -e v850/tmp-engine.c \
@SIM_ENABLE_ARCH_v850_TRUE@ -n irun.c -r v850/tmp-irun.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-icache.h v850/icache.h
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-icache.c v850/icache.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-idecode.h v850/idecode.h
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-idecode.c v850/idecode.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-semantics.h v850/semantics.h
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-semantics.c v850/semantics.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-model.h v850/model.h
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-model.c v850/model.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-support.h v850/support.h
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-support.c v850/support.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-itable.h v850/itable.h
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-itable.c v850/itable.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-engine.h v850/engine.h
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-engine.c v850/engine.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)$(SHELL) $(srcroot)/move-if-change v850/tmp-irun.c v850/irun.c
@SIM_ENABLE_ARCH_v850_TRUE@ $(AM_V_at)touch $@
sim: common: start dedicated local.mk This provides a space to generate things that we only need to build once per-arch. Some day that will be all of common/, but for now, we move the version.c management in.
2021-05-14 04:39:39 -04:00
all-recursive: $(SIM_ALL_RECURSIVE_DEPS)
sim: switch top level to automake This doesn't gain us much by itself, but it sets us up for using more features as we try to unify ports and avoid recursive make.
2021-01-17 06:17:36 -05:00
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in a new issue Copy permalink